293 lines
6.9 KiB
C
293 lines
6.9 KiB
C
// SPDX-License-Identifier: GPL-2.0
|
|
/*
|
|
* Copyright (C) 2015 Broadcom Corporation
|
|
*/
|
|
|
|
/* Broadcom Cygnus SoC internal transceivers support. */
|
|
#include "bcm-phy-lib.h"
|
|
#include <linux/brcmphy.h>
|
|
#include <linux/module.h>
|
|
#include <linux/netdevice.h>
|
|
#include <linux/phy.h>
|
|
|
|
struct bcm_omega_phy_priv {
|
|
u64 *stats;
|
|
};
|
|
|
|
/* Broadcom Cygnus Phy specific registers */
|
|
#define MII_BCM_CYGNUS_AFE_VDAC_ICTRL_0 0x91E5 /* VDAL Control register */
|
|
|
|
static int bcm_cygnus_afe_config(struct phy_device *phydev)
|
|
{
|
|
int rc;
|
|
|
|
/* ensure smdspclk is enabled */
|
|
rc = phy_write(phydev, MII_BCM54XX_AUX_CTL, 0x0c30);
|
|
if (rc < 0)
|
|
return rc;
|
|
|
|
/* AFE_VDAC_ICTRL_0 bit 7:4 Iq=1100 for 1g 10bt, normal modes */
|
|
rc = bcm_phy_write_misc(phydev, 0x39, 0x01, 0xA7C8);
|
|
if (rc < 0)
|
|
return rc;
|
|
|
|
/* AFE_HPF_TRIM_OTHERS bit11=1, short cascode enable for all modes*/
|
|
rc = bcm_phy_write_misc(phydev, 0x3A, 0x00, 0x0803);
|
|
if (rc < 0)
|
|
return rc;
|
|
|
|
/* AFE_TX_CONFIG_1 bit 7:4 Iq=1100 for test modes */
|
|
rc = bcm_phy_write_misc(phydev, 0x3A, 0x01, 0xA740);
|
|
if (rc < 0)
|
|
return rc;
|
|
|
|
/* AFE TEMPSEN_OTHERS rcal_HT, rcal_LT 10000 */
|
|
rc = bcm_phy_write_misc(phydev, 0x3A, 0x03, 0x8400);
|
|
if (rc < 0)
|
|
return rc;
|
|
|
|
/* AFE_FUTURE_RSV bit 2:0 rccal <2:0>=100 */
|
|
rc = bcm_phy_write_misc(phydev, 0x3B, 0x00, 0x0004);
|
|
if (rc < 0)
|
|
return rc;
|
|
|
|
/* Adjust bias current trim to overcome digital offSet */
|
|
rc = phy_write(phydev, MII_BRCM_CORE_BASE1E, 0x02);
|
|
if (rc < 0)
|
|
return rc;
|
|
|
|
/* make rcal=100, since rdb default is 000 */
|
|
rc = bcm_phy_write_exp_sel(phydev, MII_BRCM_CORE_EXPB1, 0x10);
|
|
if (rc < 0)
|
|
return rc;
|
|
|
|
/* CORE_EXPB0, Reset R_CAL/RC_CAL Engine */
|
|
rc = bcm_phy_write_exp_sel(phydev, MII_BRCM_CORE_EXPB0, 0x10);
|
|
if (rc < 0)
|
|
return rc;
|
|
|
|
/* CORE_EXPB0, Disable Reset R_CAL/RC_CAL Engine */
|
|
rc = bcm_phy_write_exp_sel(phydev, MII_BRCM_CORE_EXPB0, 0x00);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int bcm_cygnus_config_init(struct phy_device *phydev)
|
|
{
|
|
int reg, rc;
|
|
|
|
reg = phy_read(phydev, MII_BCM54XX_ECR);
|
|
if (reg < 0)
|
|
return reg;
|
|
|
|
/* Mask interrupts globally. */
|
|
reg |= MII_BCM54XX_ECR_IM;
|
|
rc = phy_write(phydev, MII_BCM54XX_ECR, reg);
|
|
if (rc)
|
|
return rc;
|
|
|
|
/* Unmask events of interest */
|
|
reg = ~(MII_BCM54XX_INT_DUPLEX |
|
|
MII_BCM54XX_INT_SPEED |
|
|
MII_BCM54XX_INT_LINK);
|
|
rc = phy_write(phydev, MII_BCM54XX_IMR, reg);
|
|
if (rc)
|
|
return rc;
|
|
|
|
/* Apply AFE settings for the PHY */
|
|
rc = bcm_cygnus_afe_config(phydev);
|
|
if (rc)
|
|
return rc;
|
|
|
|
/* Advertise EEE */
|
|
rc = bcm_phy_set_eee(phydev, true);
|
|
if (rc)
|
|
return rc;
|
|
|
|
/* Enable APD */
|
|
return bcm_phy_enable_apd(phydev, false);
|
|
}
|
|
|
|
static int bcm_cygnus_resume(struct phy_device *phydev)
|
|
{
|
|
int rc;
|
|
|
|
genphy_resume(phydev);
|
|
|
|
/* Re-initialize the PHY to apply AFE work-arounds and
|
|
* configurations when coming out of suspend.
|
|
*/
|
|
rc = bcm_cygnus_config_init(phydev);
|
|
if (rc)
|
|
return rc;
|
|
|
|
/* restart auto negotiation with the new settings */
|
|
return genphy_config_aneg(phydev);
|
|
}
|
|
|
|
static int bcm_omega_config_init(struct phy_device *phydev)
|
|
{
|
|
u8 count, rev;
|
|
int ret = 0;
|
|
|
|
rev = phydev->phy_id & ~phydev->drv->phy_id_mask;
|
|
|
|
pr_info_once("%s: %s PHY revision: 0x%02x\n",
|
|
phydev_name(phydev), phydev->drv->name, rev);
|
|
|
|
/* Dummy read to a register to workaround an issue upon reset where the
|
|
* internal inverter may not allow the first MDIO transaction to pass
|
|
* the MDIO management controller and make us return 0xffff for such
|
|
* reads.
|
|
*/
|
|
phy_read(phydev, MII_BMSR);
|
|
|
|
switch (rev) {
|
|
case 0x00:
|
|
ret = bcm_phy_28nm_a0b0_afe_config_init(phydev);
|
|
break;
|
|
default:
|
|
break;
|
|
}
|
|
|
|
if (ret)
|
|
return ret;
|
|
|
|
ret = bcm_phy_downshift_get(phydev, &count);
|
|
if (ret)
|
|
return ret;
|
|
|
|
/* Only enable EEE if Wirespeed/downshift is disabled */
|
|
ret = bcm_phy_set_eee(phydev, count == DOWNSHIFT_DEV_DISABLE);
|
|
if (ret)
|
|
return ret;
|
|
|
|
return bcm_phy_enable_apd(phydev, true);
|
|
}
|
|
|
|
static int bcm_omega_resume(struct phy_device *phydev)
|
|
{
|
|
int ret;
|
|
|
|
/* Re-apply workarounds coming out suspend/resume */
|
|
ret = bcm_omega_config_init(phydev);
|
|
if (ret)
|
|
return ret;
|
|
|
|
/* 28nm Gigabit PHYs come out of reset without any half-duplex
|
|
* or "hub" compliant advertised mode, fix that. This does not
|
|
* cause any problems with the PHY library since genphy_config_aneg()
|
|
* gracefully handles auto-negotiated and forced modes.
|
|
*/
|
|
return genphy_config_aneg(phydev);
|
|
}
|
|
|
|
static int bcm_omega_get_tunable(struct phy_device *phydev,
|
|
struct ethtool_tunable *tuna, void *data)
|
|
{
|
|
switch (tuna->id) {
|
|
case ETHTOOL_PHY_DOWNSHIFT:
|
|
return bcm_phy_downshift_get(phydev, (u8 *)data);
|
|
default:
|
|
return -EOPNOTSUPP;
|
|
}
|
|
}
|
|
|
|
static int bcm_omega_set_tunable(struct phy_device *phydev,
|
|
struct ethtool_tunable *tuna,
|
|
const void *data)
|
|
{
|
|
u8 count = *(u8 *)data;
|
|
int ret;
|
|
|
|
switch (tuna->id) {
|
|
case ETHTOOL_PHY_DOWNSHIFT:
|
|
ret = bcm_phy_downshift_set(phydev, count);
|
|
break;
|
|
default:
|
|
return -EOPNOTSUPP;
|
|
}
|
|
|
|
if (ret)
|
|
return ret;
|
|
|
|
/* Disable EEE advertisement since this prevents the PHY
|
|
* from successfully linking up, trigger auto-negotiation restart
|
|
* to let the MAC decide what to do.
|
|
*/
|
|
ret = bcm_phy_set_eee(phydev, count == DOWNSHIFT_DEV_DISABLE);
|
|
if (ret)
|
|
return ret;
|
|
|
|
return genphy_restart_aneg(phydev);
|
|
}
|
|
|
|
static void bcm_omega_get_phy_stats(struct phy_device *phydev,
|
|
struct ethtool_stats *stats, u64 *data)
|
|
{
|
|
struct bcm_omega_phy_priv *priv = phydev->priv;
|
|
|
|
bcm_phy_get_stats(phydev, priv->stats, stats, data);
|
|
}
|
|
|
|
static int bcm_omega_probe(struct phy_device *phydev)
|
|
{
|
|
struct bcm_omega_phy_priv *priv;
|
|
|
|
priv = devm_kzalloc(&phydev->mdio.dev, sizeof(*priv), GFP_KERNEL);
|
|
if (!priv)
|
|
return -ENOMEM;
|
|
|
|
phydev->priv = priv;
|
|
|
|
priv->stats = devm_kcalloc(&phydev->mdio.dev,
|
|
bcm_phy_get_sset_count(phydev), sizeof(u64),
|
|
GFP_KERNEL);
|
|
if (!priv->stats)
|
|
return -ENOMEM;
|
|
|
|
return 0;
|
|
}
|
|
|
|
static struct phy_driver bcm_cygnus_phy_driver[] = {
|
|
{
|
|
.phy_id = PHY_ID_BCM_CYGNUS,
|
|
.phy_id_mask = 0xfffffff0,
|
|
.name = "Broadcom Cygnus PHY",
|
|
/* PHY_GBIT_FEATURES */
|
|
.config_init = bcm_cygnus_config_init,
|
|
.ack_interrupt = bcm_phy_ack_intr,
|
|
.config_intr = bcm_phy_config_intr,
|
|
.suspend = genphy_suspend,
|
|
.resume = bcm_cygnus_resume,
|
|
}, {
|
|
.phy_id = PHY_ID_BCM_OMEGA,
|
|
.phy_id_mask = 0xfffffff0,
|
|
.name = "Broadcom Omega Combo GPHY",
|
|
/* PHY_GBIT_FEATURES */
|
|
.flags = PHY_IS_INTERNAL,
|
|
.config_init = bcm_omega_config_init,
|
|
.suspend = genphy_suspend,
|
|
.resume = bcm_omega_resume,
|
|
.get_tunable = bcm_omega_get_tunable,
|
|
.set_tunable = bcm_omega_set_tunable,
|
|
.get_sset_count = bcm_phy_get_sset_count,
|
|
.get_strings = bcm_phy_get_strings,
|
|
.get_stats = bcm_omega_get_phy_stats,
|
|
.probe = bcm_omega_probe,
|
|
}
|
|
};
|
|
|
|
static struct mdio_device_id __maybe_unused bcm_cygnus_phy_tbl[] = {
|
|
{ PHY_ID_BCM_CYGNUS, 0xfffffff0, },
|
|
{ PHY_ID_BCM_OMEGA, 0xfffffff0, },
|
|
{ }
|
|
};
|
|
MODULE_DEVICE_TABLE(mdio, bcm_cygnus_phy_tbl);
|
|
|
|
module_phy_driver(bcm_cygnus_phy_driver);
|
|
|
|
MODULE_DESCRIPTION("Broadcom Cygnus internal PHY driver");
|
|
MODULE_LICENSE("GPL v2");
|
|
MODULE_AUTHOR("Broadcom Corporation");
|