OpenCloudOS-Kernel/drivers/gpu/drm/i915/intel_dsi.c

797 lines
24 KiB
C

/*
* Copyright © 2013 Intel Corporation
*
* Permission is hereby granted, free of charge, to any person obtaining a
* copy of this software and associated documentation files (the "Software"),
* to deal in the Software without restriction, including without limitation
* the rights to use, copy, modify, merge, publish, distribute, sublicense,
* and/or sell copies of the Software, and to permit persons to whom the
* Software is furnished to do so, subject to the following conditions:
*
* The above copyright notice and this permission notice (including the next
* paragraph) shall be included in all copies or substantial portions of the
* Software.
*
* THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
* IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
* FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL
* THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
* LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
* FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER
* DEALINGS IN THE SOFTWARE.
*
* Author: Jani Nikula <jani.nikula@intel.com>
*/
#include <drm/drmP.h>
#include <drm/drm_crtc.h>
#include <drm/drm_edid.h>
#include <drm/i915_drm.h>
#include <linux/slab.h>
#include "i915_drv.h"
#include "intel_drv.h"
#include "intel_dsi.h"
#include "intel_dsi_cmd.h"
/* the sub-encoders aka panel drivers */
static const struct intel_dsi_device intel_dsi_devices[] = {
{
.panel_id = MIPI_DSI_GENERIC_PANEL_ID,
.name = "vbt-generic-dsi-vid-mode-display",
.dev_ops = &vbt_generic_dsi_display_ops,
},
};
static void band_gap_reset(struct drm_i915_private *dev_priv)
{
mutex_lock(&dev_priv->dpio_lock);
vlv_flisdsi_write(dev_priv, 0x08, 0x0001);
vlv_flisdsi_write(dev_priv, 0x0F, 0x0005);
vlv_flisdsi_write(dev_priv, 0x0F, 0x0025);
udelay(150);
vlv_flisdsi_write(dev_priv, 0x0F, 0x0000);
vlv_flisdsi_write(dev_priv, 0x08, 0x0000);
mutex_unlock(&dev_priv->dpio_lock);
}
static struct intel_dsi *intel_attached_dsi(struct drm_connector *connector)
{
return container_of(intel_attached_encoder(connector),
struct intel_dsi, base);
}
static inline bool is_vid_mode(struct intel_dsi *intel_dsi)
{
return intel_dsi->operation_mode == INTEL_DSI_VIDEO_MODE;
}
static inline bool is_cmd_mode(struct intel_dsi *intel_dsi)
{
return intel_dsi->operation_mode == INTEL_DSI_COMMAND_MODE;
}
static void intel_dsi_hot_plug(struct intel_encoder *encoder)
{
DRM_DEBUG_KMS("\n");
}
static bool intel_dsi_compute_config(struct intel_encoder *encoder,
struct intel_crtc_config *config)
{
struct intel_dsi *intel_dsi = container_of(encoder, struct intel_dsi,
base);
struct intel_connector *intel_connector = intel_dsi->attached_connector;
struct drm_display_mode *fixed_mode = intel_connector->panel.fixed_mode;
struct drm_display_mode *adjusted_mode = &config->adjusted_mode;
struct drm_display_mode *mode = &config->requested_mode;
DRM_DEBUG_KMS("\n");
if (fixed_mode)
intel_fixed_panel_mode(fixed_mode, adjusted_mode);
/* DSI uses short packets for sync events, so clear mode flags for DSI */
adjusted_mode->flags = 0;
if (intel_dsi->dev.dev_ops->mode_fixup)
return intel_dsi->dev.dev_ops->mode_fixup(&intel_dsi->dev,
mode, adjusted_mode);
return true;
}
static void intel_dsi_device_ready(struct intel_encoder *encoder)
{
struct drm_i915_private *dev_priv = encoder->base.dev->dev_private;
struct intel_crtc *intel_crtc = to_intel_crtc(encoder->base.crtc);
int pipe = intel_crtc->pipe;
u32 val;
DRM_DEBUG_KMS("\n");
mutex_lock(&dev_priv->dpio_lock);
/* program rcomp for compliance, reduce from 50 ohms to 45 ohms
* needed everytime after power gate */
vlv_flisdsi_write(dev_priv, 0x04, 0x0004);
mutex_unlock(&dev_priv->dpio_lock);
/* bandgap reset is needed after everytime we do power gate */
band_gap_reset(dev_priv);
I915_WRITE(MIPI_DEVICE_READY(pipe), ULPS_STATE_ENTER);
usleep_range(2500, 3000);
val = I915_READ(MIPI_PORT_CTRL(pipe));
I915_WRITE(MIPI_PORT_CTRL(pipe), val | LP_OUTPUT_HOLD);
usleep_range(1000, 1500);
I915_WRITE(MIPI_DEVICE_READY(pipe), ULPS_STATE_EXIT);
usleep_range(2500, 3000);
I915_WRITE(MIPI_DEVICE_READY(pipe), DEVICE_READY);
usleep_range(2500, 3000);
}
static void intel_dsi_enable(struct intel_encoder *encoder)
{
struct drm_device *dev = encoder->base.dev;
struct drm_i915_private *dev_priv = dev->dev_private;
struct intel_crtc *intel_crtc = to_intel_crtc(encoder->base.crtc);
struct intel_dsi *intel_dsi = enc_to_intel_dsi(&encoder->base);
int pipe = intel_crtc->pipe;
u32 temp;
DRM_DEBUG_KMS("\n");
if (is_cmd_mode(intel_dsi))
I915_WRITE(MIPI_MAX_RETURN_PKT_SIZE(pipe), 8 * 4);
else {
msleep(20); /* XXX */
dpi_send_cmd(intel_dsi, TURN_ON, DPI_LP_MODE_EN);
msleep(100);
if (intel_dsi->dev.dev_ops->enable)
intel_dsi->dev.dev_ops->enable(&intel_dsi->dev);
wait_for_dsi_fifo_empty(intel_dsi);
/* assert ip_tg_enable signal */
temp = I915_READ(MIPI_PORT_CTRL(pipe)) & ~LANE_CONFIGURATION_MASK;
temp = temp | intel_dsi->port_bits;
I915_WRITE(MIPI_PORT_CTRL(pipe), temp | DPI_ENABLE);
POSTING_READ(MIPI_PORT_CTRL(pipe));
}
}
static void intel_dsi_pre_enable(struct intel_encoder *encoder)
{
struct drm_device *dev = encoder->base.dev;
struct drm_i915_private *dev_priv = dev->dev_private;
struct intel_dsi *intel_dsi = enc_to_intel_dsi(&encoder->base);
struct intel_crtc *intel_crtc = to_intel_crtc(encoder->base.crtc);
enum pipe pipe = intel_crtc->pipe;
u32 tmp;
DRM_DEBUG_KMS("\n");
/* Disable DPOunit clock gating, can stall pipe
* and we need DPLL REFA always enabled */
tmp = I915_READ(DPLL(pipe));
tmp |= DPLL_REFA_CLK_ENABLE_VLV;
I915_WRITE(DPLL(pipe), tmp);
/* update the hw state for DPLL */
intel_crtc->config.dpll_hw_state.dpll = DPLL_INTEGRATED_CLOCK_VLV |
DPLL_REFA_CLK_ENABLE_VLV;
tmp = I915_READ(DSPCLK_GATE_D);
tmp |= DPOUNIT_CLOCK_GATE_DISABLE;
I915_WRITE(DSPCLK_GATE_D, tmp);
/* put device in ready state */
intel_dsi_device_ready(encoder);
msleep(intel_dsi->panel_on_delay);
if (intel_dsi->dev.dev_ops->panel_reset)
intel_dsi->dev.dev_ops->panel_reset(&intel_dsi->dev);
if (intel_dsi->dev.dev_ops->send_otp_cmds)
intel_dsi->dev.dev_ops->send_otp_cmds(&intel_dsi->dev);
wait_for_dsi_fifo_empty(intel_dsi);
/* Enable port in pre-enable phase itself because as per hw team
* recommendation, port should be enabled befor plane & pipe */
intel_dsi_enable(encoder);
}
static void intel_dsi_enable_nop(struct intel_encoder *encoder)
{
DRM_DEBUG_KMS("\n");
/* for DSI port enable has to be done before pipe
* and plane enable, so port enable is done in
* pre_enable phase itself unlike other encoders
*/
}
static void intel_dsi_pre_disable(struct intel_encoder *encoder)
{
struct intel_dsi *intel_dsi = enc_to_intel_dsi(&encoder->base);
DRM_DEBUG_KMS("\n");
if (is_vid_mode(intel_dsi)) {
/* Send Shutdown command to the panel in LP mode */
dpi_send_cmd(intel_dsi, SHUTDOWN, DPI_LP_MODE_EN);
msleep(10);
}
}
static void intel_dsi_disable(struct intel_encoder *encoder)
{
struct drm_device *dev = encoder->base.dev;
struct drm_i915_private *dev_priv = dev->dev_private;
struct intel_crtc *intel_crtc = to_intel_crtc(encoder->base.crtc);
struct intel_dsi *intel_dsi = enc_to_intel_dsi(&encoder->base);
int pipe = intel_crtc->pipe;
u32 temp;
DRM_DEBUG_KMS("\n");
if (is_vid_mode(intel_dsi)) {
wait_for_dsi_fifo_empty(intel_dsi);
/* de-assert ip_tg_enable signal */
temp = I915_READ(MIPI_PORT_CTRL(pipe));
I915_WRITE(MIPI_PORT_CTRL(pipe), temp & ~DPI_ENABLE);
POSTING_READ(MIPI_PORT_CTRL(pipe));
msleep(2);
}
/* Panel commands can be sent when clock is in LP11 */
I915_WRITE(MIPI_DEVICE_READY(pipe), 0x0);
temp = I915_READ(MIPI_CTRL(pipe));
temp &= ~ESCAPE_CLOCK_DIVIDER_MASK;
I915_WRITE(MIPI_CTRL(pipe), temp |
intel_dsi->escape_clk_div <<
ESCAPE_CLOCK_DIVIDER_SHIFT);
I915_WRITE(MIPI_EOT_DISABLE(pipe), CLOCKSTOP);
temp = I915_READ(MIPI_DSI_FUNC_PRG(pipe));
temp &= ~VID_MODE_FORMAT_MASK;
I915_WRITE(MIPI_DSI_FUNC_PRG(pipe), temp);
I915_WRITE(MIPI_DEVICE_READY(pipe), 0x1);
/* if disable packets are sent before sending shutdown packet then in
* some next enable sequence send turn on packet error is observed */
if (intel_dsi->dev.dev_ops->disable)
intel_dsi->dev.dev_ops->disable(&intel_dsi->dev);
wait_for_dsi_fifo_empty(intel_dsi);
}
static void intel_dsi_clear_device_ready(struct intel_encoder *encoder)
{
struct drm_i915_private *dev_priv = encoder->base.dev->dev_private;
struct intel_crtc *intel_crtc = to_intel_crtc(encoder->base.crtc);
int pipe = intel_crtc->pipe;
u32 val;
DRM_DEBUG_KMS("\n");
I915_WRITE(MIPI_DEVICE_READY(pipe), DEVICE_READY | ULPS_STATE_ENTER);
usleep_range(2000, 2500);
I915_WRITE(MIPI_DEVICE_READY(pipe), DEVICE_READY | ULPS_STATE_EXIT);
usleep_range(2000, 2500);
I915_WRITE(MIPI_DEVICE_READY(pipe), DEVICE_READY | ULPS_STATE_ENTER);
usleep_range(2000, 2500);
if (wait_for(((I915_READ(MIPI_PORT_CTRL(pipe)) & AFE_LATCHOUT)
== 0x00000), 30))
DRM_ERROR("DSI LP not going Low\n");
val = I915_READ(MIPI_PORT_CTRL(pipe));
I915_WRITE(MIPI_PORT_CTRL(pipe), val & ~LP_OUTPUT_HOLD);
usleep_range(1000, 1500);
I915_WRITE(MIPI_DEVICE_READY(pipe), 0x00);
usleep_range(2000, 2500);
vlv_disable_dsi_pll(encoder);
}
static void intel_dsi_post_disable(struct intel_encoder *encoder)
{
struct drm_i915_private *dev_priv = encoder->base.dev->dev_private;
struct intel_dsi *intel_dsi = enc_to_intel_dsi(&encoder->base);
u32 val;
DRM_DEBUG_KMS("\n");
intel_dsi_disable(encoder);
intel_dsi_clear_device_ready(encoder);
val = I915_READ(DSPCLK_GATE_D);
val &= ~DPOUNIT_CLOCK_GATE_DISABLE;
I915_WRITE(DSPCLK_GATE_D, val);
if (intel_dsi->dev.dev_ops->disable_panel_power)
intel_dsi->dev.dev_ops->disable_panel_power(&intel_dsi->dev);
msleep(intel_dsi->panel_off_delay);
msleep(intel_dsi->panel_pwr_cycle_delay);
}
static bool intel_dsi_get_hw_state(struct intel_encoder *encoder,
enum pipe *pipe)
{
struct drm_i915_private *dev_priv = encoder->base.dev->dev_private;
enum intel_display_power_domain power_domain;
u32 port, func;
enum pipe p;
DRM_DEBUG_KMS("\n");
power_domain = intel_display_port_power_domain(encoder);
if (!intel_display_power_is_enabled(dev_priv, power_domain))
return false;
/* XXX: this only works for one DSI output */
for (p = PIPE_A; p <= PIPE_B; p++) {
port = I915_READ(MIPI_PORT_CTRL(p));
func = I915_READ(MIPI_DSI_FUNC_PRG(p));
if ((port & DPI_ENABLE) || (func & CMD_MODE_DATA_WIDTH_MASK)) {
if (I915_READ(MIPI_DEVICE_READY(p)) & DEVICE_READY) {
*pipe = p;
return true;
}
}
}
return false;
}
static void intel_dsi_get_config(struct intel_encoder *encoder,
struct intel_crtc_config *pipe_config)
{
u32 pclk;
DRM_DEBUG_KMS("\n");
/*
* DPLL_MD is not used in case of DSI, reading will get some default value
* set dpll_md = 0
*/
pipe_config->dpll_hw_state.dpll_md = 0;
pclk = vlv_get_dsi_pclk(encoder, pipe_config->pipe_bpp);
if (!pclk)
return;
pipe_config->adjusted_mode.crtc_clock = pclk;
pipe_config->port_clock = pclk;
}
static enum drm_mode_status
intel_dsi_mode_valid(struct drm_connector *connector,
struct drm_display_mode *mode)
{
struct intel_connector *intel_connector = to_intel_connector(connector);
struct drm_display_mode *fixed_mode = intel_connector->panel.fixed_mode;
struct intel_dsi *intel_dsi = intel_attached_dsi(connector);
DRM_DEBUG_KMS("\n");
if (mode->flags & DRM_MODE_FLAG_DBLSCAN) {
DRM_DEBUG_KMS("MODE_NO_DBLESCAN\n");
return MODE_NO_DBLESCAN;
}
if (fixed_mode) {
if (mode->hdisplay > fixed_mode->hdisplay)
return MODE_PANEL;
if (mode->vdisplay > fixed_mode->vdisplay)
return MODE_PANEL;
}
return intel_dsi->dev.dev_ops->mode_valid(&intel_dsi->dev, mode);
}
/* return txclkesc cycles in terms of divider and duration in us */
static u16 txclkesc(u32 divider, unsigned int us)
{
switch (divider) {
case ESCAPE_CLOCK_DIVIDER_1:
default:
return 20 * us;
case ESCAPE_CLOCK_DIVIDER_2:
return 10 * us;
case ESCAPE_CLOCK_DIVIDER_4:
return 5 * us;
}
}
/* return pixels in terms of txbyteclkhs */
static u16 txbyteclkhs(u16 pixels, int bpp, int lane_count,
u16 burst_mode_ratio)
{
return DIV_ROUND_UP(DIV_ROUND_UP(pixels * bpp * burst_mode_ratio,
8 * 100), lane_count);
}
static void set_dsi_timings(struct drm_encoder *encoder,
const struct drm_display_mode *mode)
{
struct drm_device *dev = encoder->dev;
struct drm_i915_private *dev_priv = dev->dev_private;
struct intel_crtc *intel_crtc = to_intel_crtc(encoder->crtc);
struct intel_dsi *intel_dsi = enc_to_intel_dsi(encoder);
int pipe = intel_crtc->pipe;
unsigned int bpp = intel_crtc->config.pipe_bpp;
unsigned int lane_count = intel_dsi->lane_count;
u16 hactive, hfp, hsync, hbp, vfp, vsync, vbp;
hactive = mode->hdisplay;
hfp = mode->hsync_start - mode->hdisplay;
hsync = mode->hsync_end - mode->hsync_start;
hbp = mode->htotal - mode->hsync_end;
vfp = mode->vsync_start - mode->vdisplay;
vsync = mode->vsync_end - mode->vsync_start;
vbp = mode->vtotal - mode->vsync_end;
/* horizontal values are in terms of high speed byte clock */
hactive = txbyteclkhs(hactive, bpp, lane_count,
intel_dsi->burst_mode_ratio);
hfp = txbyteclkhs(hfp, bpp, lane_count, intel_dsi->burst_mode_ratio);
hsync = txbyteclkhs(hsync, bpp, lane_count,
intel_dsi->burst_mode_ratio);
hbp = txbyteclkhs(hbp, bpp, lane_count, intel_dsi->burst_mode_ratio);
I915_WRITE(MIPI_HACTIVE_AREA_COUNT(pipe), hactive);
I915_WRITE(MIPI_HFP_COUNT(pipe), hfp);
/* meaningful for video mode non-burst sync pulse mode only, can be zero
* for non-burst sync events and burst modes */
I915_WRITE(MIPI_HSYNC_PADDING_COUNT(pipe), hsync);
I915_WRITE(MIPI_HBP_COUNT(pipe), hbp);
/* vertical values are in terms of lines */
I915_WRITE(MIPI_VFP_COUNT(pipe), vfp);
I915_WRITE(MIPI_VSYNC_PADDING_COUNT(pipe), vsync);
I915_WRITE(MIPI_VBP_COUNT(pipe), vbp);
}
static void intel_dsi_prepare(struct intel_encoder *intel_encoder)
{
struct drm_encoder *encoder = &intel_encoder->base;
struct drm_device *dev = encoder->dev;
struct drm_i915_private *dev_priv = dev->dev_private;
struct intel_crtc *intel_crtc = to_intel_crtc(encoder->crtc);
struct intel_dsi *intel_dsi = enc_to_intel_dsi(encoder);
struct drm_display_mode *adjusted_mode =
&intel_crtc->config.adjusted_mode;
int pipe = intel_crtc->pipe;
unsigned int bpp = intel_crtc->config.pipe_bpp;
u32 val, tmp;
DRM_DEBUG_KMS("pipe %c\n", pipe_name(pipe));
/* escape clock divider, 20MHz, shared for A and C. device ready must be
* off when doing this! txclkesc? */
tmp = I915_READ(MIPI_CTRL(0));
tmp &= ~ESCAPE_CLOCK_DIVIDER_MASK;
I915_WRITE(MIPI_CTRL(0), tmp | ESCAPE_CLOCK_DIVIDER_1);
/* read request priority is per pipe */
tmp = I915_READ(MIPI_CTRL(pipe));
tmp &= ~READ_REQUEST_PRIORITY_MASK;
I915_WRITE(MIPI_CTRL(pipe), tmp | READ_REQUEST_PRIORITY_HIGH);
/* XXX: why here, why like this? handling in irq handler?! */
I915_WRITE(MIPI_INTR_STAT(pipe), 0xffffffff);
I915_WRITE(MIPI_INTR_EN(pipe), 0xffffffff);
I915_WRITE(MIPI_DPHY_PARAM(pipe), intel_dsi->dphy_reg);
I915_WRITE(MIPI_DPI_RESOLUTION(pipe),
adjusted_mode->vdisplay << VERTICAL_ADDRESS_SHIFT |
adjusted_mode->hdisplay << HORIZONTAL_ADDRESS_SHIFT);
set_dsi_timings(encoder, adjusted_mode);
val = intel_dsi->lane_count << DATA_LANES_PRG_REG_SHIFT;
if (is_cmd_mode(intel_dsi)) {
val |= intel_dsi->channel << CMD_MODE_CHANNEL_NUMBER_SHIFT;
val |= CMD_MODE_DATA_WIDTH_8_BIT; /* XXX */
} else {
val |= intel_dsi->channel << VID_MODE_CHANNEL_NUMBER_SHIFT;
/* XXX: cross-check bpp vs. pixel format? */
val |= intel_dsi->pixel_format;
}
I915_WRITE(MIPI_DSI_FUNC_PRG(pipe), val);
/* timeouts for recovery. one frame IIUC. if counter expires, EOT and
* stop state. */
/*
* In burst mode, value greater than one DPI line Time in byte clock
* (txbyteclkhs) To timeout this timer 1+ of the above said value is
* recommended.
*
* In non-burst mode, Value greater than one DPI frame time in byte
* clock(txbyteclkhs) To timeout this timer 1+ of the above said value
* is recommended.
*
* In DBI only mode, value greater than one DBI frame time in byte
* clock(txbyteclkhs) To timeout this timer 1+ of the above said value
* is recommended.
*/
if (is_vid_mode(intel_dsi) &&
intel_dsi->video_mode_format == VIDEO_MODE_BURST) {
I915_WRITE(MIPI_HS_TX_TIMEOUT(pipe),
txbyteclkhs(adjusted_mode->htotal, bpp,
intel_dsi->lane_count,
intel_dsi->burst_mode_ratio) + 1);
} else {
I915_WRITE(MIPI_HS_TX_TIMEOUT(pipe),
txbyteclkhs(adjusted_mode->vtotal *
adjusted_mode->htotal,
bpp, intel_dsi->lane_count,
intel_dsi->burst_mode_ratio) + 1);
}
I915_WRITE(MIPI_LP_RX_TIMEOUT(pipe), intel_dsi->lp_rx_timeout);
I915_WRITE(MIPI_TURN_AROUND_TIMEOUT(pipe), intel_dsi->turn_arnd_val);
I915_WRITE(MIPI_DEVICE_RESET_TIMER(pipe), intel_dsi->rst_timer_val);
/* dphy stuff */
/* in terms of low power clock */
I915_WRITE(MIPI_INIT_COUNT(pipe), txclkesc(intel_dsi->escape_clk_div, 100));
val = 0;
if (intel_dsi->eotp_pkt == 0)
val |= EOT_DISABLE;
if (intel_dsi->clock_stop)
val |= CLOCKSTOP;
/* recovery disables */
I915_WRITE(MIPI_EOT_DISABLE(pipe), val);
/* in terms of low power clock */
I915_WRITE(MIPI_INIT_COUNT(pipe), intel_dsi->init_count);
/* in terms of txbyteclkhs. actual high to low switch +
* MIPI_STOP_STATE_STALL * MIPI_LP_BYTECLK.
*
* XXX: write MIPI_STOP_STATE_STALL?
*/
I915_WRITE(MIPI_HIGH_LOW_SWITCH_COUNT(pipe),
intel_dsi->hs_to_lp_count);
/* XXX: low power clock equivalence in terms of byte clock. the number
* of byte clocks occupied in one low power clock. based on txbyteclkhs
* and txclkesc. txclkesc time / txbyteclk time * (105 +
* MIPI_STOP_STATE_STALL) / 105.???
*/
I915_WRITE(MIPI_LP_BYTECLK(pipe), intel_dsi->lp_byte_clk);
/* the bw essential for transmitting 16 long packets containing 252
* bytes meant for dcs write memory command is programmed in this
* register in terms of byte clocks. based on dsi transfer rate and the
* number of lanes configured the time taken to transmit 16 long packets
* in a dsi stream varies. */
I915_WRITE(MIPI_DBI_BW_CTRL(pipe), intel_dsi->bw_timer);
I915_WRITE(MIPI_CLK_LANE_SWITCH_TIME_CNT(pipe),
intel_dsi->clk_lp_to_hs_count << LP_HS_SSW_CNT_SHIFT |
intel_dsi->clk_hs_to_lp_count << HS_LP_PWR_SW_CNT_SHIFT);
if (is_vid_mode(intel_dsi))
/* Some panels might have resolution which is not a multiple of
* 64 like 1366 x 768. Enable RANDOM resolution support for such
* panels by default */
I915_WRITE(MIPI_VIDEO_MODE_FORMAT(pipe),
intel_dsi->video_frmt_cfg_bits |
intel_dsi->video_mode_format |
IP_TG_CONFIG |
RANDOM_DPI_DISPLAY_RESOLUTION);
}
static void intel_dsi_pre_pll_enable(struct intel_encoder *encoder)
{
DRM_DEBUG_KMS("\n");
intel_dsi_prepare(encoder);
vlv_enable_dsi_pll(encoder);
}
static enum drm_connector_status
intel_dsi_detect(struct drm_connector *connector, bool force)
{
struct intel_dsi *intel_dsi = intel_attached_dsi(connector);
struct intel_encoder *intel_encoder = &intel_dsi->base;
enum intel_display_power_domain power_domain;
enum drm_connector_status connector_status;
struct drm_i915_private *dev_priv = intel_encoder->base.dev->dev_private;
DRM_DEBUG_KMS("\n");
power_domain = intel_display_port_power_domain(intel_encoder);
intel_display_power_get(dev_priv, power_domain);
connector_status = intel_dsi->dev.dev_ops->detect(&intel_dsi->dev);
intel_display_power_put(dev_priv, power_domain);
return connector_status;
}
static int intel_dsi_get_modes(struct drm_connector *connector)
{
struct intel_connector *intel_connector = to_intel_connector(connector);
struct drm_display_mode *mode;
DRM_DEBUG_KMS("\n");
if (!intel_connector->panel.fixed_mode) {
DRM_DEBUG_KMS("no fixed mode\n");
return 0;
}
mode = drm_mode_duplicate(connector->dev,
intel_connector->panel.fixed_mode);
if (!mode) {
DRM_DEBUG_KMS("drm_mode_duplicate failed\n");
return 0;
}
drm_mode_probed_add(connector, mode);
return 1;
}
static void intel_dsi_destroy(struct drm_connector *connector)
{
struct intel_connector *intel_connector = to_intel_connector(connector);
DRM_DEBUG_KMS("\n");
intel_panel_fini(&intel_connector->panel);
drm_connector_cleanup(connector);
kfree(connector);
}
static const struct drm_encoder_funcs intel_dsi_funcs = {
.destroy = intel_encoder_destroy,
};
static const struct drm_connector_helper_funcs intel_dsi_connector_helper_funcs = {
.get_modes = intel_dsi_get_modes,
.mode_valid = intel_dsi_mode_valid,
.best_encoder = intel_best_encoder,
};
static const struct drm_connector_funcs intel_dsi_connector_funcs = {
.dpms = intel_connector_dpms,
.detect = intel_dsi_detect,
.destroy = intel_dsi_destroy,
.fill_modes = drm_helper_probe_single_connector_modes,
};
void intel_dsi_init(struct drm_device *dev)
{
struct intel_dsi *intel_dsi;
struct intel_encoder *intel_encoder;
struct drm_encoder *encoder;
struct intel_connector *intel_connector;
struct drm_connector *connector;
struct drm_display_mode *fixed_mode = NULL;
struct drm_i915_private *dev_priv = dev->dev_private;
const struct intel_dsi_device *dsi;
unsigned int i;
DRM_DEBUG_KMS("\n");
/* There is no detection method for MIPI so rely on VBT */
if (!dev_priv->vbt.has_mipi)
return;
if (IS_VALLEYVIEW(dev)) {
dev_priv->mipi_mmio_base = VLV_MIPI_BASE;
} else {
DRM_ERROR("Unsupported Mipi device to reg base");
return;
}
intel_dsi = kzalloc(sizeof(*intel_dsi), GFP_KERNEL);
if (!intel_dsi)
return;
intel_connector = kzalloc(sizeof(*intel_connector), GFP_KERNEL);
if (!intel_connector) {
kfree(intel_dsi);
return;
}
intel_encoder = &intel_dsi->base;
encoder = &intel_encoder->base;
intel_dsi->attached_connector = intel_connector;
connector = &intel_connector->base;
drm_encoder_init(dev, encoder, &intel_dsi_funcs, DRM_MODE_ENCODER_DSI);
/* XXX: very likely not all of these are needed */
intel_encoder->hot_plug = intel_dsi_hot_plug;
intel_encoder->compute_config = intel_dsi_compute_config;
intel_encoder->pre_pll_enable = intel_dsi_pre_pll_enable;
intel_encoder->pre_enable = intel_dsi_pre_enable;
intel_encoder->enable = intel_dsi_enable_nop;
intel_encoder->disable = intel_dsi_pre_disable;
intel_encoder->post_disable = intel_dsi_post_disable;
intel_encoder->get_hw_state = intel_dsi_get_hw_state;
intel_encoder->get_config = intel_dsi_get_config;
intel_connector->get_hw_state = intel_connector_get_hw_state;
intel_connector->unregister = intel_connector_unregister;
for (i = 0; i < ARRAY_SIZE(intel_dsi_devices); i++) {
dsi = &intel_dsi_devices[i];
intel_dsi->dev = *dsi;
if (dsi->dev_ops->init(&intel_dsi->dev))
break;
}
if (i == ARRAY_SIZE(intel_dsi_devices)) {
DRM_DEBUG_KMS("no device found\n");
goto err;
}
intel_encoder->type = INTEL_OUTPUT_DSI;
intel_encoder->crtc_mask = (1 << 0); /* XXX */
intel_encoder->cloneable = 0;
drm_connector_init(dev, connector, &intel_dsi_connector_funcs,
DRM_MODE_CONNECTOR_DSI);
drm_connector_helper_add(connector, &intel_dsi_connector_helper_funcs);
connector->display_info.subpixel_order = SubPixelHorizontalRGB; /*XXX*/
connector->interlace_allowed = false;
connector->doublescan_allowed = false;
intel_connector_attach_encoder(intel_connector, intel_encoder);
drm_connector_register(connector);
fixed_mode = dsi->dev_ops->get_modes(&intel_dsi->dev);
if (!fixed_mode) {
DRM_DEBUG_KMS("no fixed mode\n");
goto err;
}
fixed_mode->type |= DRM_MODE_TYPE_PREFERRED;
intel_panel_init(&intel_connector->panel, fixed_mode, NULL);
return;
err:
drm_encoder_cleanup(&intel_encoder->base);
kfree(intel_dsi);
kfree(intel_connector);
}