748 lines
20 KiB
C
748 lines
20 KiB
C
// SPDX-License-Identifier: GPL-2.0-or-later
|
|
/* Driver for Realtek PCI-Express card reader
|
|
*
|
|
* Copyright(c) 2018-2019 Realtek Semiconductor Corp. All rights reserved.
|
|
*
|
|
* Author:
|
|
* Ricky WU <ricky_wu@realtek.com>
|
|
* Rui FENG <rui_feng@realsil.com.cn>
|
|
* Wei WANG <wei_wang@realsil.com.cn>
|
|
*/
|
|
|
|
#include <linux/module.h>
|
|
#include <linux/delay.h>
|
|
#include <linux/rtsx_pci.h>
|
|
|
|
#include "rts5228.h"
|
|
#include "rtsx_pcr.h"
|
|
|
|
static u8 rts5228_get_ic_version(struct rtsx_pcr *pcr)
|
|
{
|
|
u8 val;
|
|
|
|
rtsx_pci_read_register(pcr, DUMMY_REG_RESET_0, &val);
|
|
return val & IC_VERSION_MASK;
|
|
}
|
|
|
|
static void rts5228_fill_driving(struct rtsx_pcr *pcr, u8 voltage)
|
|
{
|
|
u8 driving_3v3[4][3] = {
|
|
{0x13, 0x13, 0x13},
|
|
{0x96, 0x96, 0x96},
|
|
{0x7F, 0x7F, 0x7F},
|
|
{0x96, 0x96, 0x96},
|
|
};
|
|
u8 driving_1v8[4][3] = {
|
|
{0x99, 0x99, 0x99},
|
|
{0xB5, 0xB5, 0xB5},
|
|
{0xE6, 0x7E, 0xFE},
|
|
{0x6B, 0x6B, 0x6B},
|
|
};
|
|
u8 (*driving)[3], drive_sel;
|
|
|
|
if (voltage == OUTPUT_3V3) {
|
|
driving = driving_3v3;
|
|
drive_sel = pcr->sd30_drive_sel_3v3;
|
|
} else {
|
|
driving = driving_1v8;
|
|
drive_sel = pcr->sd30_drive_sel_1v8;
|
|
}
|
|
|
|
rtsx_pci_write_register(pcr, SD30_CLK_DRIVE_SEL,
|
|
0xFF, driving[drive_sel][0]);
|
|
|
|
rtsx_pci_write_register(pcr, SD30_CMD_DRIVE_SEL,
|
|
0xFF, driving[drive_sel][1]);
|
|
|
|
rtsx_pci_write_register(pcr, SD30_DAT_DRIVE_SEL,
|
|
0xFF, driving[drive_sel][2]);
|
|
}
|
|
|
|
static void rtsx5228_fetch_vendor_settings(struct rtsx_pcr *pcr)
|
|
{
|
|
struct pci_dev *pdev = pcr->pci;
|
|
u32 reg;
|
|
|
|
/* 0x724~0x727 */
|
|
pci_read_config_dword(pdev, PCR_SETTING_REG1, ®);
|
|
pcr_dbg(pcr, "Cfg 0x%x: 0x%x\n", PCR_SETTING_REG1, reg);
|
|
|
|
if (!rtsx_vendor_setting_valid(reg)) {
|
|
pcr_dbg(pcr, "skip fetch vendor setting\n");
|
|
return;
|
|
}
|
|
pcr->sd30_drive_sel_1v8 = rtsx_reg_to_sd30_drive_sel_1v8(reg);
|
|
pcr->aspm_en = rtsx_reg_to_aspm(reg);
|
|
|
|
/* 0x814~0x817 */
|
|
pci_read_config_dword(pdev, PCR_SETTING_REG2, ®);
|
|
pcr_dbg(pcr, "Cfg 0x%x: 0x%x\n", PCR_SETTING_REG2, reg);
|
|
|
|
pcr->rtd3_en = rtsx_reg_to_rtd3(reg);
|
|
if (rtsx_check_mmc_support(reg))
|
|
pcr->extra_caps |= EXTRA_CAPS_NO_MMC;
|
|
pcr->sd30_drive_sel_3v3 = rtsx_reg_to_sd30_drive_sel_3v3(reg);
|
|
if (rtsx_reg_check_reverse_socket(reg))
|
|
pcr->flags |= PCR_REVERSE_SOCKET;
|
|
}
|
|
|
|
static int rts5228_optimize_phy(struct rtsx_pcr *pcr)
|
|
{
|
|
return rtsx_pci_write_phy_register(pcr, 0x07, 0x8F40);
|
|
}
|
|
|
|
static void rts5228_force_power_down(struct rtsx_pcr *pcr, u8 pm_state)
|
|
{
|
|
/* Set relink_time to 0 */
|
|
rtsx_pci_write_register(pcr, AUTOLOAD_CFG_BASE + 1, MASK_8_BIT_DEF, 0);
|
|
rtsx_pci_write_register(pcr, AUTOLOAD_CFG_BASE + 2, MASK_8_BIT_DEF, 0);
|
|
rtsx_pci_write_register(pcr, AUTOLOAD_CFG_BASE + 3,
|
|
RELINK_TIME_MASK, 0);
|
|
|
|
if (pm_state == HOST_ENTER_S3)
|
|
rtsx_pci_write_register(pcr, pcr->reg_pm_ctrl3,
|
|
D3_DELINK_MODE_EN, D3_DELINK_MODE_EN);
|
|
|
|
rtsx_pci_write_register(pcr, FPDCTL,
|
|
SSC_POWER_DOWN, SSC_POWER_DOWN);
|
|
}
|
|
|
|
static int rts5228_enable_auto_blink(struct rtsx_pcr *pcr)
|
|
{
|
|
return rtsx_pci_write_register(pcr, OLT_LED_CTL,
|
|
LED_SHINE_MASK, LED_SHINE_EN);
|
|
}
|
|
|
|
static int rts5228_disable_auto_blink(struct rtsx_pcr *pcr)
|
|
{
|
|
return rtsx_pci_write_register(pcr, OLT_LED_CTL,
|
|
LED_SHINE_MASK, LED_SHINE_DISABLE);
|
|
}
|
|
|
|
static int rts5228_turn_on_led(struct rtsx_pcr *pcr)
|
|
{
|
|
return rtsx_pci_write_register(pcr, GPIO_CTL,
|
|
0x02, 0x02);
|
|
}
|
|
|
|
static int rts5228_turn_off_led(struct rtsx_pcr *pcr)
|
|
{
|
|
return rtsx_pci_write_register(pcr, GPIO_CTL,
|
|
0x02, 0x00);
|
|
}
|
|
|
|
/* SD Pull Control Enable:
|
|
* SD_DAT[3:0] ==> pull up
|
|
* SD_CD ==> pull up
|
|
* SD_WP ==> pull up
|
|
* SD_CMD ==> pull up
|
|
* SD_CLK ==> pull down
|
|
*/
|
|
static const u32 rts5228_sd_pull_ctl_enable_tbl[] = {
|
|
RTSX_REG_PAIR(CARD_PULL_CTL2, 0xAA),
|
|
RTSX_REG_PAIR(CARD_PULL_CTL3, 0xE9),
|
|
0,
|
|
};
|
|
|
|
/* SD Pull Control Disable:
|
|
* SD_DAT[3:0] ==> pull down
|
|
* SD_CD ==> pull up
|
|
* SD_WP ==> pull down
|
|
* SD_CMD ==> pull down
|
|
* SD_CLK ==> pull down
|
|
*/
|
|
static const u32 rts5228_sd_pull_ctl_disable_tbl[] = {
|
|
RTSX_REG_PAIR(CARD_PULL_CTL2, 0x55),
|
|
RTSX_REG_PAIR(CARD_PULL_CTL3, 0xD5),
|
|
0,
|
|
};
|
|
|
|
static int rts5228_sd_set_sample_push_timing_sd30(struct rtsx_pcr *pcr)
|
|
{
|
|
rtsx_pci_write_register(pcr, SD_CFG1, SD_MODE_SELECT_MASK
|
|
| SD_ASYNC_FIFO_NOT_RST, SD_30_MODE | SD_ASYNC_FIFO_NOT_RST);
|
|
rtsx_pci_write_register(pcr, CLK_CTL, CLK_LOW_FREQ, CLK_LOW_FREQ);
|
|
rtsx_pci_write_register(pcr, CARD_CLK_SOURCE, 0xFF,
|
|
CRC_VAR_CLK0 | SD30_FIX_CLK | SAMPLE_VAR_CLK1);
|
|
rtsx_pci_write_register(pcr, CLK_CTL, CLK_LOW_FREQ, 0);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int rts5228_card_power_on(struct rtsx_pcr *pcr, int card)
|
|
{
|
|
struct rtsx_cr_option *option = &pcr->option;
|
|
|
|
if (option->ocp_en)
|
|
rtsx_pci_enable_ocp(pcr);
|
|
|
|
rtsx_pci_write_register(pcr, REG_CRC_DUMMY_0,
|
|
CFG_SD_POW_AUTO_PD, CFG_SD_POW_AUTO_PD);
|
|
|
|
rtsx_pci_write_register(pcr, RTS5228_LDO1_CFG1,
|
|
RTS5228_LDO1_TUNE_MASK, RTS5228_LDO1_33);
|
|
|
|
rtsx_pci_write_register(pcr, RTS5228_LDO1233318_POW_CTL,
|
|
RTS5228_LDO1_POWERON_MASK, RTS5228_LDO1_SOFTSTART);
|
|
mdelay(2);
|
|
rtsx_pci_write_register(pcr, RTS5228_LDO1233318_POW_CTL,
|
|
RTS5228_LDO1_POWERON_MASK, RTS5228_LDO1_FULLON);
|
|
|
|
|
|
rtsx_pci_write_register(pcr, RTS5228_LDO1233318_POW_CTL,
|
|
RTS5228_LDO3318_POWERON, RTS5228_LDO3318_POWERON);
|
|
|
|
msleep(20);
|
|
|
|
rtsx_pci_write_register(pcr, CARD_OE, SD_OUTPUT_EN, SD_OUTPUT_EN);
|
|
|
|
/* Initialize SD_CFG1 register */
|
|
rtsx_pci_write_register(pcr, SD_CFG1, 0xFF,
|
|
SD_CLK_DIVIDE_128 | SD_20_MODE | SD_BUS_WIDTH_1BIT);
|
|
|
|
rtsx_pci_write_register(pcr, SD_SAMPLE_POINT_CTL,
|
|
0xFF, SD20_RX_POS_EDGE);
|
|
rtsx_pci_write_register(pcr, SD_PUSH_POINT_CTL, 0xFF, 0);
|
|
rtsx_pci_write_register(pcr, CARD_STOP, SD_STOP | SD_CLR_ERR,
|
|
SD_STOP | SD_CLR_ERR);
|
|
|
|
/* Reset SD_CFG3 register */
|
|
rtsx_pci_write_register(pcr, SD_CFG3, SD30_CLK_END_EN, 0);
|
|
rtsx_pci_write_register(pcr, REG_SD_STOP_SDCLK_CFG,
|
|
SD30_CLK_STOP_CFG_EN | SD30_CLK_STOP_CFG1 |
|
|
SD30_CLK_STOP_CFG0, 0);
|
|
|
|
if (pcr->extra_caps & EXTRA_CAPS_SD_SDR50 ||
|
|
pcr->extra_caps & EXTRA_CAPS_SD_SDR104)
|
|
rts5228_sd_set_sample_push_timing_sd30(pcr);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int rts5228_switch_output_voltage(struct rtsx_pcr *pcr, u8 voltage)
|
|
{
|
|
int err;
|
|
u16 val = 0;
|
|
|
|
rtsx_pci_write_register(pcr, RTS5228_CARD_PWR_CTL,
|
|
RTS5228_PUPDC, RTS5228_PUPDC);
|
|
|
|
switch (voltage) {
|
|
case OUTPUT_3V3:
|
|
rtsx_pci_read_phy_register(pcr, PHY_TUNE, &val);
|
|
val |= PHY_TUNE_SDBUS_33;
|
|
err = rtsx_pci_write_phy_register(pcr, PHY_TUNE, val);
|
|
if (err < 0)
|
|
return err;
|
|
|
|
rtsx_pci_write_register(pcr, RTS5228_DV3318_CFG,
|
|
RTS5228_DV3318_TUNE_MASK, RTS5228_DV3318_33);
|
|
rtsx_pci_write_register(pcr, SD_PAD_CTL,
|
|
SD_IO_USING_1V8, 0);
|
|
break;
|
|
case OUTPUT_1V8:
|
|
rtsx_pci_read_phy_register(pcr, PHY_TUNE, &val);
|
|
val &= ~PHY_TUNE_SDBUS_33;
|
|
err = rtsx_pci_write_phy_register(pcr, PHY_TUNE, val);
|
|
if (err < 0)
|
|
return err;
|
|
|
|
rtsx_pci_write_register(pcr, RTS5228_DV3318_CFG,
|
|
RTS5228_DV3318_TUNE_MASK, RTS5228_DV3318_18);
|
|
rtsx_pci_write_register(pcr, SD_PAD_CTL,
|
|
SD_IO_USING_1V8, SD_IO_USING_1V8);
|
|
break;
|
|
default:
|
|
return -EINVAL;
|
|
}
|
|
|
|
/* set pad drive */
|
|
rts5228_fill_driving(pcr, voltage);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static void rts5228_stop_cmd(struct rtsx_pcr *pcr)
|
|
{
|
|
rtsx_pci_writel(pcr, RTSX_HCBCTLR, STOP_CMD);
|
|
rtsx_pci_writel(pcr, RTSX_HDBCTLR, STOP_DMA);
|
|
rtsx_pci_write_register(pcr, RTS5260_DMA_RST_CTL_0,
|
|
RTS5260_DMA_RST | RTS5260_ADMA3_RST,
|
|
RTS5260_DMA_RST | RTS5260_ADMA3_RST);
|
|
rtsx_pci_write_register(pcr, RBCTL, RB_FLUSH, RB_FLUSH);
|
|
}
|
|
|
|
static void rts5228_card_before_power_off(struct rtsx_pcr *pcr)
|
|
{
|
|
rts5228_stop_cmd(pcr);
|
|
rts5228_switch_output_voltage(pcr, OUTPUT_3V3);
|
|
}
|
|
|
|
static void rts5228_enable_ocp(struct rtsx_pcr *pcr)
|
|
{
|
|
u8 val = 0;
|
|
|
|
val = SD_OCP_INT_EN | SD_DETECT_EN;
|
|
rtsx_pci_write_register(pcr, REG_OCPCTL, 0xFF, val);
|
|
rtsx_pci_write_register(pcr, RTS5228_LDO1_CFG0,
|
|
RTS5228_LDO1_OCP_EN | RTS5228_LDO1_OCP_LMT_EN,
|
|
RTS5228_LDO1_OCP_EN | RTS5228_LDO1_OCP_LMT_EN);
|
|
}
|
|
|
|
static void rts5228_disable_ocp(struct rtsx_pcr *pcr)
|
|
{
|
|
u8 mask = 0;
|
|
|
|
mask = SD_OCP_INT_EN | SD_DETECT_EN;
|
|
rtsx_pci_write_register(pcr, REG_OCPCTL, mask, 0);
|
|
rtsx_pci_write_register(pcr, RTS5228_LDO1_CFG0,
|
|
RTS5228_LDO1_OCP_EN | RTS5228_LDO1_OCP_LMT_EN, 0);
|
|
}
|
|
|
|
static int rts5228_card_power_off(struct rtsx_pcr *pcr, int card)
|
|
{
|
|
int err = 0;
|
|
|
|
rts5228_card_before_power_off(pcr);
|
|
err = rtsx_pci_write_register(pcr, RTS5228_LDO1233318_POW_CTL,
|
|
RTS5228_LDO_POWERON_MASK, 0);
|
|
rtsx_pci_write_register(pcr, REG_CRC_DUMMY_0, CFG_SD_POW_AUTO_PD, 0);
|
|
|
|
if (pcr->option.ocp_en)
|
|
rtsx_pci_disable_ocp(pcr);
|
|
|
|
return err;
|
|
}
|
|
|
|
static void rts5228_init_ocp(struct rtsx_pcr *pcr)
|
|
{
|
|
struct rtsx_cr_option *option = &pcr->option;
|
|
|
|
if (option->ocp_en) {
|
|
u8 mask, val;
|
|
|
|
rtsx_pci_write_register(pcr, RTS5228_LDO1_CFG0,
|
|
RTS5228_LDO1_OCP_EN | RTS5228_LDO1_OCP_LMT_EN,
|
|
RTS5228_LDO1_OCP_EN | RTS5228_LDO1_OCP_LMT_EN);
|
|
|
|
rtsx_pci_write_register(pcr, RTS5228_LDO1_CFG0,
|
|
RTS5228_LDO1_OCP_THD_MASK, option->sd_800mA_ocp_thd);
|
|
|
|
rtsx_pci_write_register(pcr, RTS5228_LDO1_CFG0,
|
|
RTS5228_LDO1_OCP_LMT_THD_MASK,
|
|
RTS5228_LDO1_LMT_THD_1500);
|
|
|
|
rtsx_pci_read_register(pcr, RTS5228_LDO1_CFG0, &val);
|
|
|
|
mask = SD_OCP_GLITCH_MASK;
|
|
val = pcr->hw_param.ocp_glitch;
|
|
rtsx_pci_write_register(pcr, REG_OCPGLITCH, mask, val);
|
|
|
|
rts5228_enable_ocp(pcr);
|
|
|
|
} else {
|
|
rtsx_pci_write_register(pcr, RTS5228_LDO1_CFG0,
|
|
RTS5228_LDO1_OCP_EN | RTS5228_LDO1_OCP_LMT_EN, 0);
|
|
}
|
|
}
|
|
|
|
static void rts5228_clear_ocpstat(struct rtsx_pcr *pcr)
|
|
{
|
|
u8 mask = 0;
|
|
u8 val = 0;
|
|
|
|
mask = SD_OCP_INT_CLR | SD_OC_CLR;
|
|
val = SD_OCP_INT_CLR | SD_OC_CLR;
|
|
|
|
rtsx_pci_write_register(pcr, REG_OCPCTL, mask, val);
|
|
|
|
udelay(1000);
|
|
rtsx_pci_write_register(pcr, REG_OCPCTL, mask, 0);
|
|
|
|
}
|
|
|
|
static void rts5228_process_ocp(struct rtsx_pcr *pcr)
|
|
{
|
|
if (!pcr->option.ocp_en)
|
|
return;
|
|
|
|
rtsx_pci_get_ocpstat(pcr, &pcr->ocp_stat);
|
|
|
|
if (pcr->ocp_stat & (SD_OC_NOW | SD_OC_EVER)) {
|
|
rts5228_clear_ocpstat(pcr);
|
|
rts5228_card_power_off(pcr, RTSX_SD_CARD);
|
|
rtsx_pci_write_register(pcr, CARD_OE, SD_OUTPUT_EN, 0);
|
|
pcr->ocp_stat = 0;
|
|
}
|
|
|
|
}
|
|
|
|
static void rts5228_init_from_cfg(struct rtsx_pcr *pcr)
|
|
{
|
|
struct pci_dev *pdev = pcr->pci;
|
|
int l1ss;
|
|
u32 lval;
|
|
struct rtsx_cr_option *option = &pcr->option;
|
|
|
|
l1ss = pci_find_ext_capability(pdev, PCI_EXT_CAP_ID_L1SS);
|
|
if (!l1ss)
|
|
return;
|
|
|
|
pci_read_config_dword(pdev, l1ss + PCI_L1SS_CTL1, &lval);
|
|
|
|
if (0 == (lval & 0x0F))
|
|
rtsx_pci_enable_oobs_polling(pcr);
|
|
else
|
|
rtsx_pci_disable_oobs_polling(pcr);
|
|
|
|
if (lval & PCI_L1SS_CTL1_ASPM_L1_1)
|
|
rtsx_set_dev_flag(pcr, ASPM_L1_1_EN);
|
|
else
|
|
rtsx_clear_dev_flag(pcr, ASPM_L1_1_EN);
|
|
|
|
if (lval & PCI_L1SS_CTL1_ASPM_L1_2)
|
|
rtsx_set_dev_flag(pcr, ASPM_L1_2_EN);
|
|
else
|
|
rtsx_clear_dev_flag(pcr, ASPM_L1_2_EN);
|
|
|
|
if (lval & PCI_L1SS_CTL1_PCIPM_L1_1)
|
|
rtsx_set_dev_flag(pcr, PM_L1_1_EN);
|
|
else
|
|
rtsx_clear_dev_flag(pcr, PM_L1_1_EN);
|
|
|
|
if (lval & PCI_L1SS_CTL1_PCIPM_L1_2)
|
|
rtsx_set_dev_flag(pcr, PM_L1_2_EN);
|
|
else
|
|
rtsx_clear_dev_flag(pcr, PM_L1_2_EN);
|
|
|
|
rtsx_pci_write_register(pcr, ASPM_FORCE_CTL, 0xFF, 0);
|
|
if (option->ltr_en) {
|
|
u16 val;
|
|
|
|
pcie_capability_read_word(pcr->pci, PCI_EXP_DEVCTL2, &val);
|
|
if (val & PCI_EXP_DEVCTL2_LTR_EN) {
|
|
option->ltr_enabled = true;
|
|
option->ltr_active = true;
|
|
rtsx_set_ltr_latency(pcr, option->ltr_active_latency);
|
|
} else {
|
|
option->ltr_enabled = false;
|
|
}
|
|
}
|
|
|
|
if (rtsx_check_dev_flag(pcr, ASPM_L1_1_EN | ASPM_L1_2_EN
|
|
| PM_L1_1_EN | PM_L1_2_EN))
|
|
option->force_clkreq_0 = false;
|
|
else
|
|
option->force_clkreq_0 = true;
|
|
}
|
|
|
|
static int rts5228_extra_init_hw(struct rtsx_pcr *pcr)
|
|
{
|
|
struct rtsx_cr_option *option = &pcr->option;
|
|
|
|
rtsx_pci_write_register(pcr, RTS5228_AUTOLOAD_CFG1,
|
|
CD_RESUME_EN_MASK, CD_RESUME_EN_MASK);
|
|
|
|
rts5228_init_from_cfg(pcr);
|
|
|
|
rtsx_pci_write_register(pcr, L1SUB_CONFIG1,
|
|
AUX_CLK_ACTIVE_SEL_MASK, MAC_CKSW_DONE);
|
|
rtsx_pci_write_register(pcr, L1SUB_CONFIG3, 0xFF, 0);
|
|
|
|
rtsx_pci_write_register(pcr, FUNC_FORCE_CTL,
|
|
FUNC_FORCE_UPME_XMT_DBG, FUNC_FORCE_UPME_XMT_DBG);
|
|
|
|
rtsx_pci_write_register(pcr, PCLK_CTL,
|
|
PCLK_MODE_SEL, PCLK_MODE_SEL);
|
|
|
|
rtsx_pci_write_register(pcr, PM_EVENT_DEBUG, PME_DEBUG_0, PME_DEBUG_0);
|
|
rtsx_pci_write_register(pcr, PM_CLK_FORCE_CTL, CLK_PM_EN, CLK_PM_EN);
|
|
|
|
/* LED shine disabled, set initial shine cycle period */
|
|
rtsx_pci_write_register(pcr, OLT_LED_CTL, 0x0F, 0x02);
|
|
|
|
/* Configure driving */
|
|
rts5228_fill_driving(pcr, OUTPUT_3V3);
|
|
|
|
if (pcr->flags & PCR_REVERSE_SOCKET)
|
|
rtsx_pci_write_register(pcr, PETXCFG, 0x30, 0x30);
|
|
else
|
|
rtsx_pci_write_register(pcr, PETXCFG, 0x30, 0x00);
|
|
|
|
/*
|
|
* If u_force_clkreq_0 is enabled, CLKREQ# PIN will be forced
|
|
* to drive low, and we forcibly request clock.
|
|
*/
|
|
if (option->force_clkreq_0)
|
|
rtsx_pci_write_register(pcr, PETXCFG,
|
|
FORCE_CLKREQ_DELINK_MASK, FORCE_CLKREQ_LOW);
|
|
else
|
|
rtsx_pci_write_register(pcr, PETXCFG,
|
|
FORCE_CLKREQ_DELINK_MASK, FORCE_CLKREQ_HIGH);
|
|
|
|
rtsx_pci_write_register(pcr, PWD_SUSPEND_EN, 0xFF, 0xFB);
|
|
rtsx_pci_write_register(pcr, pcr->reg_pm_ctrl3, 0x10, 0x00);
|
|
rtsx_pci_write_register(pcr, RTS5228_REG_PME_FORCE_CTL,
|
|
FORCE_PM_CONTROL | FORCE_PM_VALUE, FORCE_PM_CONTROL);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static void rts5228_enable_aspm(struct rtsx_pcr *pcr, bool enable)
|
|
{
|
|
u8 mask, val;
|
|
|
|
if (pcr->aspm_enabled == enable)
|
|
return;
|
|
|
|
mask = FORCE_ASPM_VAL_MASK | FORCE_ASPM_CTL0 | FORCE_ASPM_CTL1;
|
|
val = FORCE_ASPM_CTL0 | FORCE_ASPM_CTL1;
|
|
val |= (pcr->aspm_en & 0x02);
|
|
rtsx_pci_write_register(pcr, ASPM_FORCE_CTL, mask, val);
|
|
pcie_capability_clear_and_set_word(pcr->pci, PCI_EXP_LNKCTL,
|
|
PCI_EXP_LNKCTL_ASPMC, pcr->aspm_en);
|
|
pcr->aspm_enabled = enable;
|
|
}
|
|
|
|
static void rts5228_disable_aspm(struct rtsx_pcr *pcr, bool enable)
|
|
{
|
|
u8 mask, val;
|
|
|
|
if (pcr->aspm_enabled == enable)
|
|
return;
|
|
|
|
pcie_capability_clear_and_set_word(pcr->pci, PCI_EXP_LNKCTL,
|
|
PCI_EXP_LNKCTL_ASPMC, 0);
|
|
mask = FORCE_ASPM_VAL_MASK | FORCE_ASPM_CTL0 | FORCE_ASPM_CTL1;
|
|
val = FORCE_ASPM_CTL0 | FORCE_ASPM_CTL1;
|
|
rtsx_pci_write_register(pcr, ASPM_FORCE_CTL, mask, val);
|
|
rtsx_pci_write_register(pcr, SD_CFG1, SD_ASYNC_FIFO_NOT_RST, 0);
|
|
mdelay(10);
|
|
pcr->aspm_enabled = enable;
|
|
}
|
|
|
|
static void rts5228_set_aspm(struct rtsx_pcr *pcr, bool enable)
|
|
{
|
|
if (enable)
|
|
rts5228_enable_aspm(pcr, true);
|
|
else
|
|
rts5228_disable_aspm(pcr, false);
|
|
}
|
|
|
|
static void rts5228_set_l1off_cfg_sub_d0(struct rtsx_pcr *pcr, int active)
|
|
{
|
|
struct rtsx_cr_option *option = &pcr->option;
|
|
int aspm_L1_1, aspm_L1_2;
|
|
u8 val = 0;
|
|
|
|
aspm_L1_1 = rtsx_check_dev_flag(pcr, ASPM_L1_1_EN);
|
|
aspm_L1_2 = rtsx_check_dev_flag(pcr, ASPM_L1_2_EN);
|
|
|
|
if (active) {
|
|
/* run, latency: 60us */
|
|
if (aspm_L1_1)
|
|
val = option->ltr_l1off_snooze_sspwrgate;
|
|
} else {
|
|
/* l1off, latency: 300us */
|
|
if (aspm_L1_2)
|
|
val = option->ltr_l1off_sspwrgate;
|
|
}
|
|
|
|
rtsx_set_l1off_sub(pcr, val);
|
|
}
|
|
|
|
static const struct pcr_ops rts5228_pcr_ops = {
|
|
.fetch_vendor_settings = rtsx5228_fetch_vendor_settings,
|
|
.turn_on_led = rts5228_turn_on_led,
|
|
.turn_off_led = rts5228_turn_off_led,
|
|
.extra_init_hw = rts5228_extra_init_hw,
|
|
.enable_auto_blink = rts5228_enable_auto_blink,
|
|
.disable_auto_blink = rts5228_disable_auto_blink,
|
|
.card_power_on = rts5228_card_power_on,
|
|
.card_power_off = rts5228_card_power_off,
|
|
.switch_output_voltage = rts5228_switch_output_voltage,
|
|
.force_power_down = rts5228_force_power_down,
|
|
.stop_cmd = rts5228_stop_cmd,
|
|
.set_aspm = rts5228_set_aspm,
|
|
.set_l1off_cfg_sub_d0 = rts5228_set_l1off_cfg_sub_d0,
|
|
.enable_ocp = rts5228_enable_ocp,
|
|
.disable_ocp = rts5228_disable_ocp,
|
|
.init_ocp = rts5228_init_ocp,
|
|
.process_ocp = rts5228_process_ocp,
|
|
.clear_ocpstat = rts5228_clear_ocpstat,
|
|
.optimize_phy = rts5228_optimize_phy,
|
|
};
|
|
|
|
|
|
static inline u8 double_ssc_depth(u8 depth)
|
|
{
|
|
return ((depth > 1) ? (depth - 1) : depth);
|
|
}
|
|
|
|
int rts5228_pci_switch_clock(struct rtsx_pcr *pcr, unsigned int card_clock,
|
|
u8 ssc_depth, bool initial_mode, bool double_clk, bool vpclk)
|
|
{
|
|
int err, clk;
|
|
u16 n;
|
|
u8 clk_divider, mcu_cnt, div;
|
|
static const u8 depth[] = {
|
|
[RTSX_SSC_DEPTH_4M] = RTS5228_SSC_DEPTH_4M,
|
|
[RTSX_SSC_DEPTH_2M] = RTS5228_SSC_DEPTH_2M,
|
|
[RTSX_SSC_DEPTH_1M] = RTS5228_SSC_DEPTH_1M,
|
|
[RTSX_SSC_DEPTH_500K] = RTS5228_SSC_DEPTH_512K,
|
|
};
|
|
|
|
if (initial_mode) {
|
|
/* We use 250k(around) here, in initial stage */
|
|
clk_divider = SD_CLK_DIVIDE_128;
|
|
card_clock = 30000000;
|
|
} else {
|
|
clk_divider = SD_CLK_DIVIDE_0;
|
|
}
|
|
err = rtsx_pci_write_register(pcr, SD_CFG1,
|
|
SD_CLK_DIVIDE_MASK, clk_divider);
|
|
if (err < 0)
|
|
return err;
|
|
|
|
card_clock /= 1000000;
|
|
pcr_dbg(pcr, "Switch card clock to %dMHz\n", card_clock);
|
|
|
|
clk = card_clock;
|
|
if (!initial_mode && double_clk)
|
|
clk = card_clock * 2;
|
|
pcr_dbg(pcr, "Internal SSC clock: %dMHz (cur_clock = %d)\n",
|
|
clk, pcr->cur_clock);
|
|
|
|
if (clk == pcr->cur_clock)
|
|
return 0;
|
|
|
|
if (pcr->ops->conv_clk_and_div_n)
|
|
n = pcr->ops->conv_clk_and_div_n(clk, CLK_TO_DIV_N);
|
|
else
|
|
n = clk - 4;
|
|
if ((clk <= 4) || (n > 396))
|
|
return -EINVAL;
|
|
|
|
mcu_cnt = 125/clk + 3;
|
|
if (mcu_cnt > 15)
|
|
mcu_cnt = 15;
|
|
|
|
div = CLK_DIV_1;
|
|
while ((n < MIN_DIV_N_PCR - 4) && (div < CLK_DIV_8)) {
|
|
if (pcr->ops->conv_clk_and_div_n) {
|
|
int dbl_clk = pcr->ops->conv_clk_and_div_n(n,
|
|
DIV_N_TO_CLK) * 2;
|
|
n = pcr->ops->conv_clk_and_div_n(dbl_clk,
|
|
CLK_TO_DIV_N);
|
|
} else {
|
|
n = (n + 4) * 2 - 4;
|
|
}
|
|
div++;
|
|
}
|
|
|
|
n = (n / 2) - 1;
|
|
pcr_dbg(pcr, "n = %d, div = %d\n", n, div);
|
|
|
|
ssc_depth = depth[ssc_depth];
|
|
if (double_clk)
|
|
ssc_depth = double_ssc_depth(ssc_depth);
|
|
|
|
if (ssc_depth) {
|
|
if (div == CLK_DIV_2) {
|
|
if (ssc_depth > 1)
|
|
ssc_depth -= 1;
|
|
else
|
|
ssc_depth = RTS5228_SSC_DEPTH_8M;
|
|
} else if (div == CLK_DIV_4) {
|
|
if (ssc_depth > 2)
|
|
ssc_depth -= 2;
|
|
else
|
|
ssc_depth = RTS5228_SSC_DEPTH_8M;
|
|
} else if (div == CLK_DIV_8) {
|
|
if (ssc_depth > 3)
|
|
ssc_depth -= 3;
|
|
else
|
|
ssc_depth = RTS5228_SSC_DEPTH_8M;
|
|
}
|
|
} else {
|
|
ssc_depth = 0;
|
|
}
|
|
pcr_dbg(pcr, "ssc_depth = %d\n", ssc_depth);
|
|
|
|
rtsx_pci_init_cmd(pcr);
|
|
rtsx_pci_add_cmd(pcr, WRITE_REG_CMD, CLK_CTL,
|
|
CLK_LOW_FREQ, CLK_LOW_FREQ);
|
|
rtsx_pci_add_cmd(pcr, WRITE_REG_CMD, CLK_DIV,
|
|
0xFF, (div << 4) | mcu_cnt);
|
|
rtsx_pci_add_cmd(pcr, WRITE_REG_CMD, SSC_CTL1, SSC_RSTB, 0);
|
|
rtsx_pci_add_cmd(pcr, WRITE_REG_CMD, SSC_CTL2,
|
|
SSC_DEPTH_MASK, ssc_depth);
|
|
rtsx_pci_add_cmd(pcr, WRITE_REG_CMD, SSC_DIV_N_0, 0xFF, n);
|
|
rtsx_pci_add_cmd(pcr, WRITE_REG_CMD, SSC_CTL1, SSC_RSTB, SSC_RSTB);
|
|
if (vpclk) {
|
|
rtsx_pci_add_cmd(pcr, WRITE_REG_CMD, SD_VPCLK0_CTL,
|
|
PHASE_NOT_RESET, 0);
|
|
rtsx_pci_add_cmd(pcr, WRITE_REG_CMD, SD_VPCLK1_CTL,
|
|
PHASE_NOT_RESET, 0);
|
|
rtsx_pci_add_cmd(pcr, WRITE_REG_CMD, SD_VPCLK0_CTL,
|
|
PHASE_NOT_RESET, PHASE_NOT_RESET);
|
|
rtsx_pci_add_cmd(pcr, WRITE_REG_CMD, SD_VPCLK1_CTL,
|
|
PHASE_NOT_RESET, PHASE_NOT_RESET);
|
|
}
|
|
|
|
err = rtsx_pci_send_cmd(pcr, 2000);
|
|
if (err < 0)
|
|
return err;
|
|
|
|
/* Wait SSC clock stable */
|
|
udelay(SSC_CLOCK_STABLE_WAIT);
|
|
err = rtsx_pci_write_register(pcr, CLK_CTL, CLK_LOW_FREQ, 0);
|
|
if (err < 0)
|
|
return err;
|
|
|
|
pcr->cur_clock = clk;
|
|
return 0;
|
|
|
|
}
|
|
|
|
void rts5228_init_params(struct rtsx_pcr *pcr)
|
|
{
|
|
struct rtsx_cr_option *option = &pcr->option;
|
|
struct rtsx_hw_param *hw_param = &pcr->hw_param;
|
|
|
|
pcr->extra_caps = EXTRA_CAPS_SD_SDR50 | EXTRA_CAPS_SD_SDR104;
|
|
pcr->num_slots = 1;
|
|
pcr->ops = &rts5228_pcr_ops;
|
|
|
|
pcr->flags = 0;
|
|
pcr->card_drive_sel = RTSX_CARD_DRIVE_DEFAULT;
|
|
pcr->sd30_drive_sel_1v8 = CFG_DRIVER_TYPE_B;
|
|
pcr->sd30_drive_sel_3v3 = CFG_DRIVER_TYPE_B;
|
|
pcr->aspm_en = ASPM_L1_EN;
|
|
pcr->tx_initial_phase = SET_CLOCK_PHASE(28, 27, 11);
|
|
pcr->rx_initial_phase = SET_CLOCK_PHASE(24, 6, 5);
|
|
|
|
pcr->ic_version = rts5228_get_ic_version(pcr);
|
|
pcr->sd_pull_ctl_enable_tbl = rts5228_sd_pull_ctl_enable_tbl;
|
|
pcr->sd_pull_ctl_disable_tbl = rts5228_sd_pull_ctl_disable_tbl;
|
|
|
|
pcr->reg_pm_ctrl3 = RTS5228_AUTOLOAD_CFG3;
|
|
|
|
option->dev_flags = (LTR_L1SS_PWR_GATE_CHECK_CARD_EN
|
|
| LTR_L1SS_PWR_GATE_EN);
|
|
option->ltr_en = true;
|
|
|
|
/* init latency of active, idle, L1OFF to 60us, 300us, 3ms */
|
|
option->ltr_active_latency = LTR_ACTIVE_LATENCY_DEF;
|
|
option->ltr_idle_latency = LTR_IDLE_LATENCY_DEF;
|
|
option->ltr_l1off_latency = LTR_L1OFF_LATENCY_DEF;
|
|
option->l1_snooze_delay = L1_SNOOZE_DELAY_DEF;
|
|
option->ltr_l1off_sspwrgate = 0x7F;
|
|
option->ltr_l1off_snooze_sspwrgate = 0x78;
|
|
|
|
option->ocp_en = 1;
|
|
hw_param->interrupt_en |= SD_OC_INT_EN;
|
|
hw_param->ocp_glitch = SD_OCP_GLITCH_800U;
|
|
option->sd_800mA_ocp_thd = RTS5228_LDO1_OCP_THD_930;
|
|
}
|