453 lines
13 KiB
C
453 lines
13 KiB
C
/*
|
|
* Amiga Linux/m68k and Linux/PPC Zorro NS8390 Ethernet Driver
|
|
*
|
|
* (C) Copyright 1998-2000 by some Elitist 680x0 Users(TM)
|
|
*
|
|
* ---------------------------------------------------------------------------
|
|
*
|
|
* This program is based on all the other NE2000 drivers for Linux
|
|
*
|
|
* ---------------------------------------------------------------------------
|
|
*
|
|
* This file is subject to the terms and conditions of the GNU General Public
|
|
* License. See the file COPYING in the main directory of the Linux
|
|
* distribution for more details.
|
|
*
|
|
* ---------------------------------------------------------------------------
|
|
*
|
|
* The Ariadne II and X-Surf are Zorro-II boards containing Realtek RTL8019AS
|
|
* Ethernet Controllers.
|
|
*/
|
|
|
|
#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
|
|
|
|
#include <linux/module.h>
|
|
#include <linux/kernel.h>
|
|
#include <linux/errno.h>
|
|
#include <linux/init.h>
|
|
#include <linux/delay.h>
|
|
#include <linux/netdevice.h>
|
|
#include <linux/etherdevice.h>
|
|
#include <linux/zorro.h>
|
|
#include <linux/jiffies.h>
|
|
|
|
#include <asm/irq.h>
|
|
#include <asm/amigaints.h>
|
|
#include <asm/amigahw.h>
|
|
|
|
#define EI_SHIFT(x) (ei_local->reg_offset[x])
|
|
#define ei_inb(port) in_8(port)
|
|
#define ei_outb(val, port) out_8(port, val)
|
|
#define ei_inb_p(port) in_8(port)
|
|
#define ei_outb_p(val, port) out_8(port, val)
|
|
|
|
static const char version[] =
|
|
"8390.c:v1.10cvs 9/23/94 Donald Becker (becker@cesdis.gsfc.nasa.gov)\n";
|
|
|
|
#include "lib8390.c"
|
|
|
|
#define DRV_NAME "zorro8390"
|
|
|
|
#define NE_BASE (dev->base_addr)
|
|
#define NE_CMD (0x00 * 2)
|
|
#define NE_DATAPORT (0x10 * 2) /* NatSemi-defined port window offset */
|
|
#define NE_RESET (0x1f * 2) /* Issue a read to reset,
|
|
* a write to clear. */
|
|
#define NE_IO_EXTENT (0x20 * 2)
|
|
|
|
#define NE_EN0_ISR (0x07 * 2)
|
|
#define NE_EN0_DCFG (0x0e * 2)
|
|
|
|
#define NE_EN0_RSARLO (0x08 * 2)
|
|
#define NE_EN0_RSARHI (0x09 * 2)
|
|
#define NE_EN0_RCNTLO (0x0a * 2)
|
|
#define NE_EN0_RXCR (0x0c * 2)
|
|
#define NE_EN0_TXCR (0x0d * 2)
|
|
#define NE_EN0_RCNTHI (0x0b * 2)
|
|
#define NE_EN0_IMR (0x0f * 2)
|
|
|
|
#define NESM_START_PG 0x40 /* First page of TX buffer */
|
|
#define NESM_STOP_PG 0x80 /* Last page +1 of RX ring */
|
|
|
|
#define WORDSWAP(a) ((((a) >> 8) & 0xff) | ((a) << 8))
|
|
|
|
static struct card_info {
|
|
zorro_id id;
|
|
const char *name;
|
|
unsigned int offset;
|
|
} cards[] = {
|
|
{ ZORRO_PROD_VILLAGE_TRONIC_ARIADNE2, "Ariadne II", 0x0600 },
|
|
{ ZORRO_PROD_INDIVIDUAL_COMPUTERS_X_SURF, "X-Surf", 0x8600 },
|
|
};
|
|
|
|
/* Hard reset the card. This used to pause for the same period that a
|
|
* 8390 reset command required, but that shouldn't be necessary.
|
|
*/
|
|
static void zorro8390_reset_8390(struct net_device *dev)
|
|
{
|
|
unsigned long reset_start_time = jiffies;
|
|
struct ei_device *ei_local = netdev_priv(dev);
|
|
|
|
netif_dbg(ei_local, hw, dev, "resetting - t=%ld...\n", jiffies);
|
|
|
|
z_writeb(z_readb(NE_BASE + NE_RESET), NE_BASE + NE_RESET);
|
|
|
|
ei_status.txing = 0;
|
|
ei_status.dmaing = 0;
|
|
|
|
/* This check _should_not_ be necessary, omit eventually. */
|
|
while ((z_readb(NE_BASE + NE_EN0_ISR) & ENISR_RESET) == 0)
|
|
if (time_after(jiffies, reset_start_time + 2 * HZ / 100)) {
|
|
netdev_warn(dev, "%s: did not complete\n", __func__);
|
|
break;
|
|
}
|
|
z_writeb(ENISR_RESET, NE_BASE + NE_EN0_ISR); /* Ack intr */
|
|
}
|
|
|
|
/* Grab the 8390 specific header. Similar to the block_input routine, but
|
|
* we don't need to be concerned with ring wrap as the header will be at
|
|
* the start of a page, so we optimize accordingly.
|
|
*/
|
|
static void zorro8390_get_8390_hdr(struct net_device *dev,
|
|
struct e8390_pkt_hdr *hdr, int ring_page)
|
|
{
|
|
int nic_base = dev->base_addr;
|
|
int cnt;
|
|
short *ptrs;
|
|
|
|
/* This *shouldn't* happen.
|
|
* If it does, it's the last thing you'll see
|
|
*/
|
|
if (ei_status.dmaing) {
|
|
netdev_warn(dev,
|
|
"%s: DMAing conflict [DMAstat:%d][irqlock:%d]\n",
|
|
__func__, ei_status.dmaing, ei_status.irqlock);
|
|
return;
|
|
}
|
|
|
|
ei_status.dmaing |= 0x01;
|
|
z_writeb(E8390_NODMA + E8390_PAGE0 + E8390_START, nic_base + NE_CMD);
|
|
z_writeb(ENISR_RDC, nic_base + NE_EN0_ISR);
|
|
z_writeb(sizeof(struct e8390_pkt_hdr), nic_base + NE_EN0_RCNTLO);
|
|
z_writeb(0, nic_base + NE_EN0_RCNTHI);
|
|
z_writeb(0, nic_base + NE_EN0_RSARLO); /* On page boundary */
|
|
z_writeb(ring_page, nic_base + NE_EN0_RSARHI);
|
|
z_writeb(E8390_RREAD+E8390_START, nic_base + NE_CMD);
|
|
|
|
ptrs = (short *)hdr;
|
|
for (cnt = 0; cnt < sizeof(struct e8390_pkt_hdr) >> 1; cnt++)
|
|
*ptrs++ = z_readw(NE_BASE + NE_DATAPORT);
|
|
|
|
z_writeb(ENISR_RDC, nic_base + NE_EN0_ISR); /* Ack intr */
|
|
|
|
hdr->count = WORDSWAP(hdr->count);
|
|
|
|
ei_status.dmaing &= ~0x01;
|
|
}
|
|
|
|
/* Block input and output, similar to the Crynwr packet driver.
|
|
* If you are porting to a new ethercard, look at the packet driver source
|
|
* for hints. The NEx000 doesn't share the on-board packet memory --
|
|
* you have to put the packet out through the "remote DMA" dataport
|
|
* using z_writeb.
|
|
*/
|
|
static void zorro8390_block_input(struct net_device *dev, int count,
|
|
struct sk_buff *skb, int ring_offset)
|
|
{
|
|
int nic_base = dev->base_addr;
|
|
char *buf = skb->data;
|
|
short *ptrs;
|
|
int cnt;
|
|
|
|
/* This *shouldn't* happen.
|
|
* If it does, it's the last thing you'll see
|
|
*/
|
|
if (ei_status.dmaing) {
|
|
netdev_err(dev, "%s: DMAing conflict [DMAstat:%d][irqlock:%d]\n",
|
|
__func__, ei_status.dmaing, ei_status.irqlock);
|
|
return;
|
|
}
|
|
ei_status.dmaing |= 0x01;
|
|
z_writeb(E8390_NODMA + E8390_PAGE0 + E8390_START, nic_base + NE_CMD);
|
|
z_writeb(ENISR_RDC, nic_base + NE_EN0_ISR);
|
|
z_writeb(count & 0xff, nic_base + NE_EN0_RCNTLO);
|
|
z_writeb(count >> 8, nic_base + NE_EN0_RCNTHI);
|
|
z_writeb(ring_offset & 0xff, nic_base + NE_EN0_RSARLO);
|
|
z_writeb(ring_offset >> 8, nic_base + NE_EN0_RSARHI);
|
|
z_writeb(E8390_RREAD+E8390_START, nic_base + NE_CMD);
|
|
ptrs = (short *)buf;
|
|
for (cnt = 0; cnt < count >> 1; cnt++)
|
|
*ptrs++ = z_readw(NE_BASE + NE_DATAPORT);
|
|
if (count & 0x01)
|
|
buf[count - 1] = z_readb(NE_BASE + NE_DATAPORT);
|
|
|
|
z_writeb(ENISR_RDC, nic_base + NE_EN0_ISR); /* Ack intr */
|
|
ei_status.dmaing &= ~0x01;
|
|
}
|
|
|
|
static void zorro8390_block_output(struct net_device *dev, int count,
|
|
const unsigned char *buf,
|
|
const int start_page)
|
|
{
|
|
int nic_base = NE_BASE;
|
|
unsigned long dma_start;
|
|
short *ptrs;
|
|
int cnt;
|
|
|
|
/* Round the count up for word writes. Do we need to do this?
|
|
* What effect will an odd byte count have on the 8390?
|
|
* I should check someday.
|
|
*/
|
|
if (count & 0x01)
|
|
count++;
|
|
|
|
/* This *shouldn't* happen.
|
|
* If it does, it's the last thing you'll see
|
|
*/
|
|
if (ei_status.dmaing) {
|
|
netdev_err(dev, "%s: DMAing conflict [DMAstat:%d][irqlock:%d]\n",
|
|
__func__, ei_status.dmaing, ei_status.irqlock);
|
|
return;
|
|
}
|
|
ei_status.dmaing |= 0x01;
|
|
/* We should already be in page 0, but to be safe... */
|
|
z_writeb(E8390_PAGE0+E8390_START+E8390_NODMA, nic_base + NE_CMD);
|
|
|
|
z_writeb(ENISR_RDC, nic_base + NE_EN0_ISR);
|
|
|
|
/* Now the normal output. */
|
|
z_writeb(count & 0xff, nic_base + NE_EN0_RCNTLO);
|
|
z_writeb(count >> 8, nic_base + NE_EN0_RCNTHI);
|
|
z_writeb(0x00, nic_base + NE_EN0_RSARLO);
|
|
z_writeb(start_page, nic_base + NE_EN0_RSARHI);
|
|
|
|
z_writeb(E8390_RWRITE + E8390_START, nic_base + NE_CMD);
|
|
ptrs = (short *)buf;
|
|
for (cnt = 0; cnt < count >> 1; cnt++)
|
|
z_writew(*ptrs++, NE_BASE + NE_DATAPORT);
|
|
|
|
dma_start = jiffies;
|
|
|
|
while ((z_readb(NE_BASE + NE_EN0_ISR) & ENISR_RDC) == 0)
|
|
if (time_after(jiffies, dma_start + 2 * HZ / 100)) {
|
|
/* 20ms */
|
|
netdev_warn(dev, "timeout waiting for Tx RDC\n");
|
|
zorro8390_reset_8390(dev);
|
|
__NS8390_init(dev, 1);
|
|
break;
|
|
}
|
|
|
|
z_writeb(ENISR_RDC, nic_base + NE_EN0_ISR); /* Ack intr */
|
|
ei_status.dmaing &= ~0x01;
|
|
}
|
|
|
|
static int zorro8390_open(struct net_device *dev)
|
|
{
|
|
__ei_open(dev);
|
|
return 0;
|
|
}
|
|
|
|
static int zorro8390_close(struct net_device *dev)
|
|
{
|
|
struct ei_device *ei_local = netdev_priv(dev);
|
|
|
|
netif_dbg(ei_local, ifdown, dev, "Shutting down ethercard\n");
|
|
__ei_close(dev);
|
|
return 0;
|
|
}
|
|
|
|
static void zorro8390_remove_one(struct zorro_dev *z)
|
|
{
|
|
struct net_device *dev = zorro_get_drvdata(z);
|
|
|
|
unregister_netdev(dev);
|
|
free_irq(IRQ_AMIGA_PORTS, dev);
|
|
release_mem_region(ZTWO_PADDR(dev->base_addr), NE_IO_EXTENT * 2);
|
|
free_netdev(dev);
|
|
}
|
|
|
|
static struct zorro_device_id zorro8390_zorro_tbl[] = {
|
|
{ ZORRO_PROD_VILLAGE_TRONIC_ARIADNE2, },
|
|
{ ZORRO_PROD_INDIVIDUAL_COMPUTERS_X_SURF, },
|
|
{ 0 }
|
|
};
|
|
MODULE_DEVICE_TABLE(zorro, zorro8390_zorro_tbl);
|
|
|
|
static const struct net_device_ops zorro8390_netdev_ops = {
|
|
.ndo_open = zorro8390_open,
|
|
.ndo_stop = zorro8390_close,
|
|
.ndo_start_xmit = __ei_start_xmit,
|
|
.ndo_tx_timeout = __ei_tx_timeout,
|
|
.ndo_get_stats = __ei_get_stats,
|
|
.ndo_set_rx_mode = __ei_set_multicast_list,
|
|
.ndo_validate_addr = eth_validate_addr,
|
|
.ndo_set_mac_address = eth_mac_addr,
|
|
#ifdef CONFIG_NET_POLL_CONTROLLER
|
|
.ndo_poll_controller = __ei_poll,
|
|
#endif
|
|
};
|
|
|
|
static int zorro8390_init(struct net_device *dev, unsigned long board,
|
|
const char *name, void __iomem *ioaddr)
|
|
{
|
|
int i;
|
|
int err;
|
|
unsigned char SA_prom[32];
|
|
int start_page, stop_page;
|
|
static u32 zorro8390_offsets[16] = {
|
|
0x00, 0x02, 0x04, 0x06, 0x08, 0x0a, 0x0c, 0x0e,
|
|
0x10, 0x12, 0x14, 0x16, 0x18, 0x1a, 0x1c, 0x1e,
|
|
};
|
|
|
|
/* Reset card. Who knows what dain-bramaged state it was left in. */
|
|
{
|
|
unsigned long reset_start_time = jiffies;
|
|
|
|
z_writeb(z_readb(ioaddr + NE_RESET), ioaddr + NE_RESET);
|
|
|
|
while ((z_readb(ioaddr + NE_EN0_ISR) & ENISR_RESET) == 0)
|
|
if (time_after(jiffies,
|
|
reset_start_time + 2 * HZ / 100)) {
|
|
netdev_warn(dev, "not found (no reset ack)\n");
|
|
return -ENODEV;
|
|
}
|
|
|
|
z_writeb(0xff, ioaddr + NE_EN0_ISR); /* Ack all intr. */
|
|
}
|
|
|
|
/* Read the 16 bytes of station address PROM.
|
|
* We must first initialize registers,
|
|
* similar to NS8390_init(eifdev, 0).
|
|
* We can't reliably read the SAPROM address without this.
|
|
* (I learned the hard way!).
|
|
*/
|
|
{
|
|
static const struct {
|
|
u32 value;
|
|
u32 offset;
|
|
} program_seq[] = {
|
|
{E8390_NODMA + E8390_PAGE0 + E8390_STOP, NE_CMD},
|
|
/* Select page 0 */
|
|
{0x48, NE_EN0_DCFG}, /* 0x48: Set byte-wide access */
|
|
{0x00, NE_EN0_RCNTLO}, /* Clear the count regs */
|
|
{0x00, NE_EN0_RCNTHI},
|
|
{0x00, NE_EN0_IMR}, /* Mask completion irq */
|
|
{0xFF, NE_EN0_ISR},
|
|
{E8390_RXOFF, NE_EN0_RXCR}, /* 0x20 Set to monitor */
|
|
{E8390_TXOFF, NE_EN0_TXCR}, /* 0x02 and loopback mode */
|
|
{32, NE_EN0_RCNTLO},
|
|
{0x00, NE_EN0_RCNTHI},
|
|
{0x00, NE_EN0_RSARLO}, /* DMA starting at 0x0000 */
|
|
{0x00, NE_EN0_RSARHI},
|
|
{E8390_RREAD + E8390_START, NE_CMD},
|
|
};
|
|
for (i = 0; i < ARRAY_SIZE(program_seq); i++)
|
|
z_writeb(program_seq[i].value,
|
|
ioaddr + program_seq[i].offset);
|
|
}
|
|
for (i = 0; i < 16; i++) {
|
|
SA_prom[i] = z_readb(ioaddr + NE_DATAPORT);
|
|
(void)z_readb(ioaddr + NE_DATAPORT);
|
|
}
|
|
|
|
/* We must set the 8390 for word mode. */
|
|
z_writeb(0x49, ioaddr + NE_EN0_DCFG);
|
|
start_page = NESM_START_PG;
|
|
stop_page = NESM_STOP_PG;
|
|
|
|
dev->base_addr = (unsigned long)ioaddr;
|
|
dev->irq = IRQ_AMIGA_PORTS;
|
|
|
|
/* Install the Interrupt handler */
|
|
i = request_irq(IRQ_AMIGA_PORTS, __ei_interrupt,
|
|
IRQF_SHARED, DRV_NAME, dev);
|
|
if (i)
|
|
return i;
|
|
|
|
for (i = 0; i < ETH_ALEN; i++)
|
|
dev->dev_addr[i] = SA_prom[i];
|
|
|
|
pr_debug("Found ethernet address: %pM\n", dev->dev_addr);
|
|
|
|
ei_status.name = name;
|
|
ei_status.tx_start_page = start_page;
|
|
ei_status.stop_page = stop_page;
|
|
ei_status.word16 = 1;
|
|
|
|
ei_status.rx_start_page = start_page + TX_PAGES;
|
|
|
|
ei_status.reset_8390 = zorro8390_reset_8390;
|
|
ei_status.block_input = zorro8390_block_input;
|
|
ei_status.block_output = zorro8390_block_output;
|
|
ei_status.get_8390_hdr = zorro8390_get_8390_hdr;
|
|
ei_status.reg_offset = zorro8390_offsets;
|
|
|
|
dev->netdev_ops = &zorro8390_netdev_ops;
|
|
__NS8390_init(dev, 0);
|
|
|
|
err = register_netdev(dev);
|
|
if (err) {
|
|
free_irq(IRQ_AMIGA_PORTS, dev);
|
|
return err;
|
|
}
|
|
|
|
netdev_info(dev, "%s at 0x%08lx, Ethernet Address %pM\n",
|
|
name, board, dev->dev_addr);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int zorro8390_init_one(struct zorro_dev *z,
|
|
const struct zorro_device_id *ent)
|
|
{
|
|
struct net_device *dev;
|
|
unsigned long board, ioaddr;
|
|
int err, i;
|
|
|
|
for (i = ARRAY_SIZE(cards) - 1; i >= 0; i--)
|
|
if (z->id == cards[i].id)
|
|
break;
|
|
if (i < 0)
|
|
return -ENODEV;
|
|
|
|
board = z->resource.start;
|
|
ioaddr = board + cards[i].offset;
|
|
dev = ____alloc_ei_netdev(0);
|
|
if (!dev)
|
|
return -ENOMEM;
|
|
if (!request_mem_region(ioaddr, NE_IO_EXTENT * 2, DRV_NAME)) {
|
|
free_netdev(dev);
|
|
return -EBUSY;
|
|
}
|
|
err = zorro8390_init(dev, board, cards[i].name, ZTWO_VADDR(ioaddr));
|
|
if (err) {
|
|
release_mem_region(ioaddr, NE_IO_EXTENT * 2);
|
|
free_netdev(dev);
|
|
return err;
|
|
}
|
|
zorro_set_drvdata(z, dev);
|
|
return 0;
|
|
}
|
|
|
|
static struct zorro_driver zorro8390_driver = {
|
|
.name = "zorro8390",
|
|
.id_table = zorro8390_zorro_tbl,
|
|
.probe = zorro8390_init_one,
|
|
.remove = zorro8390_remove_one,
|
|
};
|
|
|
|
static int __init zorro8390_init_module(void)
|
|
{
|
|
return zorro_register_driver(&zorro8390_driver);
|
|
}
|
|
|
|
static void __exit zorro8390_cleanup_module(void)
|
|
{
|
|
zorro_unregister_driver(&zorro8390_driver);
|
|
}
|
|
|
|
module_init(zorro8390_init_module);
|
|
module_exit(zorro8390_cleanup_module);
|
|
|
|
MODULE_LICENSE("GPL");
|