416 lines
9.1 KiB
C
416 lines
9.1 KiB
C
/*
|
|
* Driver for the Conexant CX25821 PCIe bridge
|
|
*
|
|
* Copyright (C) 2009 Conexant Systems Inc.
|
|
* Authors <shu.lin@conexant.com>, <hiep.huynh@conexant.com>
|
|
* Based on Steven Toth <stoth@linuxtv.org> cx23885 driver
|
|
*
|
|
* This program is free software; you can redistribute it and/or modify
|
|
* it under the terms of the GNU General Public License as published by
|
|
* the Free Software Foundation; either version 2 of the License, or
|
|
* (at your option) any later version.
|
|
*
|
|
* This program is distributed in the hope that it will be useful,
|
|
* but WITHOUT ANY WARRANTY; without even the implied warranty of
|
|
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
|
*
|
|
* GNU General Public License for more details.
|
|
*/
|
|
|
|
#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
|
|
|
|
#include <linux/module.h>
|
|
#include <linux/i2c.h>
|
|
#include "cx25821.h"
|
|
|
|
static unsigned int i2c_debug;
|
|
module_param(i2c_debug, int, 0644);
|
|
MODULE_PARM_DESC(i2c_debug, "enable debug messages [i2c]");
|
|
|
|
static unsigned int i2c_scan;
|
|
module_param(i2c_scan, int, 0444);
|
|
MODULE_PARM_DESC(i2c_scan, "scan i2c bus at insmod time");
|
|
|
|
#define dprintk(level, fmt, arg...) \
|
|
do { \
|
|
if (i2c_debug >= level) \
|
|
printk(KERN_DEBUG "%s/0: " fmt, dev->name, ##arg); \
|
|
} while (0)
|
|
|
|
#define I2C_WAIT_DELAY 32
|
|
#define I2C_WAIT_RETRY 64
|
|
|
|
#define I2C_EXTEND (1 << 3)
|
|
#define I2C_NOSTOP (1 << 4)
|
|
|
|
static inline int i2c_slave_did_ack(struct i2c_adapter *i2c_adap)
|
|
{
|
|
struct cx25821_i2c *bus = i2c_adap->algo_data;
|
|
struct cx25821_dev *dev = bus->dev;
|
|
return cx_read(bus->reg_stat) & 0x01;
|
|
}
|
|
|
|
static inline int i2c_is_busy(struct i2c_adapter *i2c_adap)
|
|
{
|
|
struct cx25821_i2c *bus = i2c_adap->algo_data;
|
|
struct cx25821_dev *dev = bus->dev;
|
|
return cx_read(bus->reg_stat) & 0x02 ? 1 : 0;
|
|
}
|
|
|
|
static int i2c_wait_done(struct i2c_adapter *i2c_adap)
|
|
{
|
|
int count;
|
|
|
|
for (count = 0; count < I2C_WAIT_RETRY; count++) {
|
|
if (!i2c_is_busy(i2c_adap))
|
|
break;
|
|
udelay(I2C_WAIT_DELAY);
|
|
}
|
|
|
|
if (I2C_WAIT_RETRY == count)
|
|
return 0;
|
|
|
|
return 1;
|
|
}
|
|
|
|
static int i2c_sendbytes(struct i2c_adapter *i2c_adap,
|
|
const struct i2c_msg *msg, int joined_rlen)
|
|
{
|
|
struct cx25821_i2c *bus = i2c_adap->algo_data;
|
|
struct cx25821_dev *dev = bus->dev;
|
|
u32 wdata, addr, ctrl;
|
|
int retval, cnt;
|
|
|
|
if (joined_rlen)
|
|
dprintk(1, "%s(msg->wlen=%d, nextmsg->rlen=%d)\n", __func__,
|
|
msg->len, joined_rlen);
|
|
else
|
|
dprintk(1, "%s(msg->len=%d)\n", __func__, msg->len);
|
|
|
|
/* Deal with i2c probe functions with zero payload */
|
|
if (msg->len == 0) {
|
|
cx_write(bus->reg_addr, msg->addr << 25);
|
|
cx_write(bus->reg_ctrl, bus->i2c_period | (1 << 2));
|
|
|
|
if (!i2c_wait_done(i2c_adap))
|
|
return -EIO;
|
|
|
|
if (!i2c_slave_did_ack(i2c_adap))
|
|
return -EIO;
|
|
|
|
dprintk(1, "%s(): returns 0\n", __func__);
|
|
return 0;
|
|
}
|
|
|
|
/* dev, reg + first byte */
|
|
addr = (msg->addr << 25) | msg->buf[0];
|
|
wdata = msg->buf[0];
|
|
|
|
ctrl = bus->i2c_period | (1 << 12) | (1 << 2);
|
|
|
|
if (msg->len > 1)
|
|
ctrl |= I2C_NOSTOP | I2C_EXTEND;
|
|
else if (joined_rlen)
|
|
ctrl |= I2C_NOSTOP;
|
|
|
|
cx_write(bus->reg_addr, addr);
|
|
cx_write(bus->reg_wdata, wdata);
|
|
cx_write(bus->reg_ctrl, ctrl);
|
|
|
|
retval = i2c_wait_done(i2c_adap);
|
|
if (retval < 0)
|
|
goto err;
|
|
|
|
if (retval == 0)
|
|
goto eio;
|
|
|
|
if (i2c_debug) {
|
|
if (!(ctrl & I2C_NOSTOP))
|
|
printk(" >\n");
|
|
}
|
|
|
|
for (cnt = 1; cnt < msg->len; cnt++) {
|
|
/* following bytes */
|
|
wdata = msg->buf[cnt];
|
|
ctrl = bus->i2c_period | (1 << 12) | (1 << 2);
|
|
|
|
if (cnt < msg->len - 1)
|
|
ctrl |= I2C_NOSTOP | I2C_EXTEND;
|
|
else if (joined_rlen)
|
|
ctrl |= I2C_NOSTOP;
|
|
|
|
cx_write(bus->reg_addr, addr);
|
|
cx_write(bus->reg_wdata, wdata);
|
|
cx_write(bus->reg_ctrl, ctrl);
|
|
|
|
retval = i2c_wait_done(i2c_adap);
|
|
if (retval < 0)
|
|
goto err;
|
|
|
|
if (retval == 0)
|
|
goto eio;
|
|
|
|
if (i2c_debug) {
|
|
dprintk(1, " %02x", msg->buf[cnt]);
|
|
if (!(ctrl & I2C_NOSTOP))
|
|
dprintk(1, " >\n");
|
|
}
|
|
}
|
|
|
|
return msg->len;
|
|
|
|
eio:
|
|
retval = -EIO;
|
|
err:
|
|
if (i2c_debug)
|
|
pr_err(" ERR: %d\n", retval);
|
|
return retval;
|
|
}
|
|
|
|
static int i2c_readbytes(struct i2c_adapter *i2c_adap,
|
|
const struct i2c_msg *msg, int joined)
|
|
{
|
|
struct cx25821_i2c *bus = i2c_adap->algo_data;
|
|
struct cx25821_dev *dev = bus->dev;
|
|
u32 ctrl, cnt;
|
|
int retval;
|
|
|
|
if (i2c_debug && !joined)
|
|
dprintk(1, "6-%s(msg->len=%d)\n", __func__, msg->len);
|
|
|
|
/* Deal with i2c probe functions with zero payload */
|
|
if (msg->len == 0) {
|
|
cx_write(bus->reg_addr, msg->addr << 25);
|
|
cx_write(bus->reg_ctrl, bus->i2c_period | (1 << 2) | 1);
|
|
if (!i2c_wait_done(i2c_adap))
|
|
return -EIO;
|
|
if (!i2c_slave_did_ack(i2c_adap))
|
|
return -EIO;
|
|
|
|
dprintk(1, "%s(): returns 0\n", __func__);
|
|
return 0;
|
|
}
|
|
|
|
if (i2c_debug) {
|
|
if (joined)
|
|
dprintk(1, " R");
|
|
else
|
|
dprintk(1, " <R %02x", (msg->addr << 1) + 1);
|
|
}
|
|
|
|
for (cnt = 0; cnt < msg->len; cnt++) {
|
|
|
|
ctrl = bus->i2c_period | (1 << 12) | (1 << 2) | 1;
|
|
|
|
if (cnt < msg->len - 1)
|
|
ctrl |= I2C_NOSTOP | I2C_EXTEND;
|
|
|
|
cx_write(bus->reg_addr, msg->addr << 25);
|
|
cx_write(bus->reg_ctrl, ctrl);
|
|
|
|
retval = i2c_wait_done(i2c_adap);
|
|
if (retval < 0)
|
|
goto err;
|
|
if (retval == 0)
|
|
goto eio;
|
|
msg->buf[cnt] = cx_read(bus->reg_rdata) & 0xff;
|
|
|
|
if (i2c_debug) {
|
|
dprintk(1, " %02x", msg->buf[cnt]);
|
|
if (!(ctrl & I2C_NOSTOP))
|
|
dprintk(1, " >\n");
|
|
}
|
|
}
|
|
|
|
return msg->len;
|
|
eio:
|
|
retval = -EIO;
|
|
err:
|
|
if (i2c_debug)
|
|
pr_err(" ERR: %d\n", retval);
|
|
return retval;
|
|
}
|
|
|
|
static int i2c_xfer(struct i2c_adapter *i2c_adap, struct i2c_msg *msgs, int num)
|
|
{
|
|
struct cx25821_i2c *bus = i2c_adap->algo_data;
|
|
struct cx25821_dev *dev = bus->dev;
|
|
int i, retval = 0;
|
|
|
|
dprintk(1, "%s(num = %d)\n", __func__, num);
|
|
|
|
for (i = 0; i < num; i++) {
|
|
dprintk(1, "%s(num = %d) addr = 0x%02x len = 0x%x\n",
|
|
__func__, num, msgs[i].addr, msgs[i].len);
|
|
|
|
if (msgs[i].flags & I2C_M_RD) {
|
|
/* read */
|
|
retval = i2c_readbytes(i2c_adap, &msgs[i], 0);
|
|
} else if (i + 1 < num && (msgs[i + 1].flags & I2C_M_RD) &&
|
|
msgs[i].addr == msgs[i + 1].addr) {
|
|
/* write then read from same address */
|
|
retval = i2c_sendbytes(i2c_adap, &msgs[i],
|
|
msgs[i + 1].len);
|
|
|
|
if (retval < 0)
|
|
goto err;
|
|
i++;
|
|
retval = i2c_readbytes(i2c_adap, &msgs[i], 1);
|
|
} else {
|
|
/* write */
|
|
retval = i2c_sendbytes(i2c_adap, &msgs[i], 0);
|
|
}
|
|
|
|
if (retval < 0)
|
|
goto err;
|
|
}
|
|
return num;
|
|
|
|
err:
|
|
return retval;
|
|
}
|
|
|
|
|
|
static u32 cx25821_functionality(struct i2c_adapter *adap)
|
|
{
|
|
return I2C_FUNC_SMBUS_EMUL | I2C_FUNC_I2C | I2C_FUNC_SMBUS_WORD_DATA |
|
|
I2C_FUNC_SMBUS_READ_WORD_DATA | I2C_FUNC_SMBUS_WRITE_WORD_DATA;
|
|
}
|
|
|
|
static const struct i2c_algorithm cx25821_i2c_algo_template = {
|
|
.master_xfer = i2c_xfer,
|
|
.functionality = cx25821_functionality,
|
|
#ifdef NEED_ALGO_CONTROL
|
|
.algo_control = dummy_algo_control,
|
|
#endif
|
|
};
|
|
|
|
static struct i2c_adapter cx25821_i2c_adap_template = {
|
|
.name = "cx25821",
|
|
.owner = THIS_MODULE,
|
|
.algo = &cx25821_i2c_algo_template,
|
|
};
|
|
|
|
static struct i2c_client cx25821_i2c_client_template = {
|
|
.name = "cx25821 internal",
|
|
};
|
|
|
|
/* init + register i2c adapter */
|
|
int cx25821_i2c_register(struct cx25821_i2c *bus)
|
|
{
|
|
struct cx25821_dev *dev = bus->dev;
|
|
|
|
dprintk(1, "%s(bus = %d)\n", __func__, bus->nr);
|
|
|
|
bus->i2c_adap = cx25821_i2c_adap_template;
|
|
bus->i2c_client = cx25821_i2c_client_template;
|
|
bus->i2c_adap.dev.parent = &dev->pci->dev;
|
|
|
|
strlcpy(bus->i2c_adap.name, bus->dev->name, sizeof(bus->i2c_adap.name));
|
|
|
|
bus->i2c_adap.algo_data = bus;
|
|
i2c_set_adapdata(&bus->i2c_adap, &dev->v4l2_dev);
|
|
i2c_add_adapter(&bus->i2c_adap);
|
|
|
|
bus->i2c_client.adapter = &bus->i2c_adap;
|
|
|
|
/* set up the I2c */
|
|
bus->i2c_client.addr = (0x88 >> 1);
|
|
|
|
return bus->i2c_rc;
|
|
}
|
|
|
|
int cx25821_i2c_unregister(struct cx25821_i2c *bus)
|
|
{
|
|
i2c_del_adapter(&bus->i2c_adap);
|
|
return 0;
|
|
}
|
|
|
|
#if 0 /* Currently unused */
|
|
static void cx25821_av_clk(struct cx25821_dev *dev, int enable)
|
|
{
|
|
/* write 0 to bus 2 addr 0x144 via i2x_xfer() */
|
|
char buffer[3];
|
|
struct i2c_msg msg;
|
|
dprintk(1, "%s(enabled = %d)\n", __func__, enable);
|
|
|
|
/* Register 0x144 */
|
|
buffer[0] = 0x01;
|
|
buffer[1] = 0x44;
|
|
if (enable == 1)
|
|
buffer[2] = 0x05;
|
|
else
|
|
buffer[2] = 0x00;
|
|
|
|
msg.addr = 0x44;
|
|
msg.flags = I2C_M_TEN;
|
|
msg.len = 3;
|
|
msg.buf = buffer;
|
|
|
|
i2c_xfer(&dev->i2c_bus[0].i2c_adap, &msg, 1);
|
|
}
|
|
#endif
|
|
|
|
int cx25821_i2c_read(struct cx25821_i2c *bus, u16 reg_addr, int *value)
|
|
{
|
|
struct i2c_client *client = &bus->i2c_client;
|
|
int v = 0;
|
|
u8 addr[2] = { 0, 0 };
|
|
u8 buf[4] = { 0, 0, 0, 0 };
|
|
|
|
struct i2c_msg msgs[2] = {
|
|
{
|
|
.addr = client->addr,
|
|
.flags = 0,
|
|
.len = 2,
|
|
.buf = addr,
|
|
}, {
|
|
.addr = client->addr,
|
|
.flags = I2C_M_RD,
|
|
.len = 4,
|
|
.buf = buf,
|
|
}
|
|
};
|
|
|
|
addr[0] = (reg_addr >> 8);
|
|
addr[1] = (reg_addr & 0xff);
|
|
msgs[0].addr = 0x44;
|
|
msgs[1].addr = 0x44;
|
|
|
|
i2c_xfer(client->adapter, msgs, 2);
|
|
|
|
v = (buf[3] << 24) | (buf[2] << 16) | (buf[1] << 8) | buf[0];
|
|
*value = v;
|
|
|
|
return v;
|
|
}
|
|
|
|
int cx25821_i2c_write(struct cx25821_i2c *bus, u16 reg_addr, int value)
|
|
{
|
|
struct i2c_client *client = &bus->i2c_client;
|
|
int retval = 0;
|
|
u8 buf[6] = { 0, 0, 0, 0, 0, 0 };
|
|
|
|
struct i2c_msg msgs[1] = {
|
|
{
|
|
.addr = client->addr,
|
|
.flags = 0,
|
|
.len = 6,
|
|
.buf = buf,
|
|
}
|
|
};
|
|
|
|
buf[0] = reg_addr >> 8;
|
|
buf[1] = reg_addr & 0xff;
|
|
buf[5] = (value >> 24) & 0xff;
|
|
buf[4] = (value >> 16) & 0xff;
|
|
buf[3] = (value >> 8) & 0xff;
|
|
buf[2] = value & 0xff;
|
|
client->flags = 0;
|
|
msgs[0].addr = 0x44;
|
|
|
|
retval = i2c_xfer(client->adapter, msgs, 1);
|
|
|
|
return retval;
|
|
}
|