637 lines
16 KiB
C
637 lines
16 KiB
C
// SPDX-License-Identifier: GPL-2.0-or-later
|
|
/*
|
|
* max30102.c - Support for MAX30102 heart rate and pulse oximeter sensor
|
|
*
|
|
* Copyright (C) 2017 Matt Ranostay <matt.ranostay@konsulko.com>
|
|
*
|
|
* Support for MAX30105 optical particle sensor
|
|
* Copyright (C) 2017 Peter Meerwald-Stadler <pmeerw@pmeerw.net>
|
|
*
|
|
* 7-bit I2C chip address: 0x57
|
|
* TODO: proximity power saving feature
|
|
*/
|
|
|
|
#include <linux/module.h>
|
|
#include <linux/init.h>
|
|
#include <linux/interrupt.h>
|
|
#include <linux/delay.h>
|
|
#include <linux/err.h>
|
|
#include <linux/irq.h>
|
|
#include <linux/i2c.h>
|
|
#include <linux/mutex.h>
|
|
#include <linux/mod_devicetable.h>
|
|
#include <linux/regmap.h>
|
|
#include <linux/iio/iio.h>
|
|
#include <linux/iio/buffer.h>
|
|
#include <linux/iio/kfifo_buf.h>
|
|
|
|
#define MAX30102_REGMAP_NAME "max30102_regmap"
|
|
#define MAX30102_DRV_NAME "max30102"
|
|
#define MAX30102_PART_NUMBER 0x15
|
|
|
|
enum max30102_chip_id {
|
|
max30102,
|
|
max30105,
|
|
};
|
|
|
|
enum max3012_led_idx {
|
|
MAX30102_LED_RED,
|
|
MAX30102_LED_IR,
|
|
MAX30105_LED_GREEN,
|
|
};
|
|
|
|
#define MAX30102_REG_INT_STATUS 0x00
|
|
#define MAX30102_REG_INT_STATUS_PWR_RDY BIT(0)
|
|
#define MAX30102_REG_INT_STATUS_PROX_INT BIT(4)
|
|
#define MAX30102_REG_INT_STATUS_ALC_OVF BIT(5)
|
|
#define MAX30102_REG_INT_STATUS_PPG_RDY BIT(6)
|
|
#define MAX30102_REG_INT_STATUS_FIFO_RDY BIT(7)
|
|
|
|
#define MAX30102_REG_INT_ENABLE 0x02
|
|
#define MAX30102_REG_INT_ENABLE_PROX_INT_EN BIT(4)
|
|
#define MAX30102_REG_INT_ENABLE_ALC_OVF_EN BIT(5)
|
|
#define MAX30102_REG_INT_ENABLE_PPG_EN BIT(6)
|
|
#define MAX30102_REG_INT_ENABLE_FIFO_EN BIT(7)
|
|
#define MAX30102_REG_INT_ENABLE_MASK 0xf0
|
|
#define MAX30102_REG_INT_ENABLE_MASK_SHIFT 4
|
|
|
|
#define MAX30102_REG_FIFO_WR_PTR 0x04
|
|
#define MAX30102_REG_FIFO_OVR_CTR 0x05
|
|
#define MAX30102_REG_FIFO_RD_PTR 0x06
|
|
#define MAX30102_REG_FIFO_DATA 0x07
|
|
#define MAX30102_REG_FIFO_DATA_BYTES 3
|
|
|
|
#define MAX30102_REG_FIFO_CONFIG 0x08
|
|
#define MAX30102_REG_FIFO_CONFIG_AVG_4SAMPLES BIT(1)
|
|
#define MAX30102_REG_FIFO_CONFIG_AVG_SHIFT 5
|
|
#define MAX30102_REG_FIFO_CONFIG_AFULL BIT(0)
|
|
|
|
#define MAX30102_REG_MODE_CONFIG 0x09
|
|
#define MAX30102_REG_MODE_CONFIG_MODE_NONE 0x00
|
|
#define MAX30102_REG_MODE_CONFIG_MODE_HR 0x02 /* red LED */
|
|
#define MAX30102_REG_MODE_CONFIG_MODE_HR_SPO2 0x03 /* red + IR LED */
|
|
#define MAX30102_REG_MODE_CONFIG_MODE_MULTI 0x07 /* multi-LED mode */
|
|
#define MAX30102_REG_MODE_CONFIG_MODE_MASK GENMASK(2, 0)
|
|
#define MAX30102_REG_MODE_CONFIG_PWR BIT(7)
|
|
|
|
#define MAX30102_REG_MODE_CONTROL_SLOT21 0x11 /* multi-LED control */
|
|
#define MAX30102_REG_MODE_CONTROL_SLOT43 0x12
|
|
#define MAX30102_REG_MODE_CONTROL_SLOT_MASK (GENMASK(6, 4) | GENMASK(2, 0))
|
|
#define MAX30102_REG_MODE_CONTROL_SLOT_SHIFT 4
|
|
|
|
#define MAX30102_REG_SPO2_CONFIG 0x0a
|
|
#define MAX30102_REG_SPO2_CONFIG_PULSE_411_US 0x03
|
|
#define MAX30102_REG_SPO2_CONFIG_SR_400HZ 0x03
|
|
#define MAX30102_REG_SPO2_CONFIG_SR_MASK 0x07
|
|
#define MAX30102_REG_SPO2_CONFIG_SR_MASK_SHIFT 2
|
|
#define MAX30102_REG_SPO2_CONFIG_ADC_4096_STEPS BIT(0)
|
|
#define MAX30102_REG_SPO2_CONFIG_ADC_MASK_SHIFT 5
|
|
|
|
#define MAX30102_REG_RED_LED_CONFIG 0x0c
|
|
#define MAX30102_REG_IR_LED_CONFIG 0x0d
|
|
#define MAX30105_REG_GREEN_LED_CONFIG 0x0e
|
|
|
|
#define MAX30102_REG_TEMP_CONFIG 0x21
|
|
#define MAX30102_REG_TEMP_CONFIG_TEMP_EN BIT(0)
|
|
|
|
#define MAX30102_REG_TEMP_INTEGER 0x1f
|
|
#define MAX30102_REG_TEMP_FRACTION 0x20
|
|
|
|
#define MAX30102_REG_REV_ID 0xfe
|
|
#define MAX30102_REG_PART_ID 0xff
|
|
|
|
struct max30102_data {
|
|
struct i2c_client *client;
|
|
struct iio_dev *indio_dev;
|
|
struct mutex lock;
|
|
struct regmap *regmap;
|
|
enum max30102_chip_id chip_id;
|
|
|
|
u8 buffer[12];
|
|
__be32 processed_buffer[3]; /* 3 x 18-bit (padded to 32-bits) */
|
|
};
|
|
|
|
static const struct regmap_config max30102_regmap_config = {
|
|
.name = MAX30102_REGMAP_NAME,
|
|
|
|
.reg_bits = 8,
|
|
.val_bits = 8,
|
|
};
|
|
|
|
static const unsigned long max30102_scan_masks[] = {
|
|
BIT(MAX30102_LED_RED) | BIT(MAX30102_LED_IR),
|
|
0
|
|
};
|
|
|
|
static const unsigned long max30105_scan_masks[] = {
|
|
BIT(MAX30102_LED_RED) | BIT(MAX30102_LED_IR),
|
|
BIT(MAX30102_LED_RED) | BIT(MAX30102_LED_IR) |
|
|
BIT(MAX30105_LED_GREEN),
|
|
0
|
|
};
|
|
|
|
#define MAX30102_INTENSITY_CHANNEL(_si, _mod) { \
|
|
.type = IIO_INTENSITY, \
|
|
.channel2 = _mod, \
|
|
.modified = 1, \
|
|
.scan_index = _si, \
|
|
.scan_type = { \
|
|
.sign = 'u', \
|
|
.shift = 8, \
|
|
.realbits = 18, \
|
|
.storagebits = 32, \
|
|
.endianness = IIO_BE, \
|
|
}, \
|
|
}
|
|
|
|
static const struct iio_chan_spec max30102_channels[] = {
|
|
MAX30102_INTENSITY_CHANNEL(MAX30102_LED_RED, IIO_MOD_LIGHT_RED),
|
|
MAX30102_INTENSITY_CHANNEL(MAX30102_LED_IR, IIO_MOD_LIGHT_IR),
|
|
{
|
|
.type = IIO_TEMP,
|
|
.info_mask_separate =
|
|
BIT(IIO_CHAN_INFO_RAW) | BIT(IIO_CHAN_INFO_SCALE),
|
|
.scan_index = -1,
|
|
},
|
|
};
|
|
|
|
static const struct iio_chan_spec max30105_channels[] = {
|
|
MAX30102_INTENSITY_CHANNEL(MAX30102_LED_RED, IIO_MOD_LIGHT_RED),
|
|
MAX30102_INTENSITY_CHANNEL(MAX30102_LED_IR, IIO_MOD_LIGHT_IR),
|
|
MAX30102_INTENSITY_CHANNEL(MAX30105_LED_GREEN, IIO_MOD_LIGHT_GREEN),
|
|
{
|
|
.type = IIO_TEMP,
|
|
.info_mask_separate =
|
|
BIT(IIO_CHAN_INFO_RAW) | BIT(IIO_CHAN_INFO_SCALE),
|
|
.scan_index = -1,
|
|
},
|
|
};
|
|
|
|
static int max30102_set_power(struct max30102_data *data, bool en)
|
|
{
|
|
return regmap_update_bits(data->regmap, MAX30102_REG_MODE_CONFIG,
|
|
MAX30102_REG_MODE_CONFIG_PWR,
|
|
en ? 0 : MAX30102_REG_MODE_CONFIG_PWR);
|
|
}
|
|
|
|
static int max30102_set_powermode(struct max30102_data *data, u8 mode, bool en)
|
|
{
|
|
u8 reg = mode;
|
|
|
|
if (!en)
|
|
reg |= MAX30102_REG_MODE_CONFIG_PWR;
|
|
|
|
return regmap_update_bits(data->regmap, MAX30102_REG_MODE_CONFIG,
|
|
MAX30102_REG_MODE_CONFIG_PWR |
|
|
MAX30102_REG_MODE_CONFIG_MODE_MASK, reg);
|
|
}
|
|
|
|
#define MAX30102_MODE_CONTROL_LED_SLOTS(slot2, slot1) \
|
|
((slot2 << MAX30102_REG_MODE_CONTROL_SLOT_SHIFT) | slot1)
|
|
|
|
static int max30102_buffer_postenable(struct iio_dev *indio_dev)
|
|
{
|
|
struct max30102_data *data = iio_priv(indio_dev);
|
|
int ret;
|
|
u8 reg;
|
|
|
|
switch (*indio_dev->active_scan_mask) {
|
|
case BIT(MAX30102_LED_RED) | BIT(MAX30102_LED_IR):
|
|
reg = MAX30102_REG_MODE_CONFIG_MODE_HR_SPO2;
|
|
break;
|
|
case BIT(MAX30102_LED_RED) | BIT(MAX30102_LED_IR) |
|
|
BIT(MAX30105_LED_GREEN):
|
|
ret = regmap_update_bits(data->regmap,
|
|
MAX30102_REG_MODE_CONTROL_SLOT21,
|
|
MAX30102_REG_MODE_CONTROL_SLOT_MASK,
|
|
MAX30102_MODE_CONTROL_LED_SLOTS(2, 1));
|
|
if (ret)
|
|
return ret;
|
|
|
|
ret = regmap_update_bits(data->regmap,
|
|
MAX30102_REG_MODE_CONTROL_SLOT43,
|
|
MAX30102_REG_MODE_CONTROL_SLOT_MASK,
|
|
MAX30102_MODE_CONTROL_LED_SLOTS(0, 3));
|
|
if (ret)
|
|
return ret;
|
|
|
|
reg = MAX30102_REG_MODE_CONFIG_MODE_MULTI;
|
|
break;
|
|
default:
|
|
return -EINVAL;
|
|
}
|
|
|
|
return max30102_set_powermode(data, reg, true);
|
|
}
|
|
|
|
static int max30102_buffer_predisable(struct iio_dev *indio_dev)
|
|
{
|
|
struct max30102_data *data = iio_priv(indio_dev);
|
|
|
|
return max30102_set_powermode(data, MAX30102_REG_MODE_CONFIG_MODE_NONE,
|
|
false);
|
|
}
|
|
|
|
static const struct iio_buffer_setup_ops max30102_buffer_setup_ops = {
|
|
.postenable = max30102_buffer_postenable,
|
|
.predisable = max30102_buffer_predisable,
|
|
};
|
|
|
|
static inline int max30102_fifo_count(struct max30102_data *data)
|
|
{
|
|
unsigned int val;
|
|
int ret;
|
|
|
|
ret = regmap_read(data->regmap, MAX30102_REG_INT_STATUS, &val);
|
|
if (ret)
|
|
return ret;
|
|
|
|
/* FIFO has one sample slot left */
|
|
if (val & MAX30102_REG_INT_STATUS_FIFO_RDY)
|
|
return 1;
|
|
|
|
return 0;
|
|
}
|
|
|
|
#define MAX30102_COPY_DATA(i) \
|
|
memcpy(&data->processed_buffer[(i)], \
|
|
&buffer[(i) * MAX30102_REG_FIFO_DATA_BYTES], \
|
|
MAX30102_REG_FIFO_DATA_BYTES)
|
|
|
|
static int max30102_read_measurement(struct max30102_data *data,
|
|
unsigned int measurements)
|
|
{
|
|
int ret;
|
|
u8 *buffer = (u8 *) &data->buffer;
|
|
|
|
ret = i2c_smbus_read_i2c_block_data(data->client,
|
|
MAX30102_REG_FIFO_DATA,
|
|
measurements *
|
|
MAX30102_REG_FIFO_DATA_BYTES,
|
|
buffer);
|
|
|
|
switch (measurements) {
|
|
case 3:
|
|
MAX30102_COPY_DATA(2);
|
|
fallthrough;
|
|
case 2:
|
|
MAX30102_COPY_DATA(1);
|
|
fallthrough;
|
|
case 1:
|
|
MAX30102_COPY_DATA(0);
|
|
break;
|
|
default:
|
|
return -EINVAL;
|
|
}
|
|
|
|
return (ret == measurements * MAX30102_REG_FIFO_DATA_BYTES) ?
|
|
0 : -EINVAL;
|
|
}
|
|
|
|
static irqreturn_t max30102_interrupt_handler(int irq, void *private)
|
|
{
|
|
struct iio_dev *indio_dev = private;
|
|
struct max30102_data *data = iio_priv(indio_dev);
|
|
unsigned int measurements = bitmap_weight(indio_dev->active_scan_mask,
|
|
indio_dev->masklength);
|
|
int ret, cnt = 0;
|
|
|
|
mutex_lock(&data->lock);
|
|
|
|
while (cnt || (cnt = max30102_fifo_count(data)) > 0) {
|
|
ret = max30102_read_measurement(data, measurements);
|
|
if (ret)
|
|
break;
|
|
|
|
iio_push_to_buffers(data->indio_dev, data->processed_buffer);
|
|
cnt--;
|
|
}
|
|
|
|
mutex_unlock(&data->lock);
|
|
|
|
return IRQ_HANDLED;
|
|
}
|
|
|
|
static int max30102_get_current_idx(unsigned int val, int *reg)
|
|
{
|
|
/* each step is 0.200 mA */
|
|
*reg = val / 200;
|
|
|
|
return *reg > 0xff ? -EINVAL : 0;
|
|
}
|
|
|
|
static int max30102_led_init(struct max30102_data *data)
|
|
{
|
|
struct device *dev = &data->client->dev;
|
|
unsigned int val;
|
|
int reg, ret;
|
|
|
|
ret = device_property_read_u32(dev, "maxim,red-led-current-microamp", &val);
|
|
if (ret) {
|
|
dev_info(dev, "no red-led-current-microamp set\n");
|
|
|
|
/* Default to 7 mA RED LED */
|
|
val = 7000;
|
|
}
|
|
|
|
ret = max30102_get_current_idx(val, ®);
|
|
if (ret) {
|
|
dev_err(dev, "invalid RED LED current setting %d\n", val);
|
|
return ret;
|
|
}
|
|
|
|
ret = regmap_write(data->regmap, MAX30102_REG_RED_LED_CONFIG, reg);
|
|
if (ret)
|
|
return ret;
|
|
|
|
if (data->chip_id == max30105) {
|
|
ret = device_property_read_u32(dev,
|
|
"maxim,green-led-current-microamp", &val);
|
|
if (ret) {
|
|
dev_info(dev, "no green-led-current-microamp set\n");
|
|
|
|
/* Default to 7 mA green LED */
|
|
val = 7000;
|
|
}
|
|
|
|
ret = max30102_get_current_idx(val, ®);
|
|
if (ret) {
|
|
dev_err(dev, "invalid green LED current setting %d\n",
|
|
val);
|
|
return ret;
|
|
}
|
|
|
|
ret = regmap_write(data->regmap, MAX30105_REG_GREEN_LED_CONFIG,
|
|
reg);
|
|
if (ret)
|
|
return ret;
|
|
}
|
|
|
|
ret = device_property_read_u32(dev, "maxim,ir-led-current-microamp", &val);
|
|
if (ret) {
|
|
dev_info(dev, "no ir-led-current-microamp set\n");
|
|
|
|
/* Default to 7 mA IR LED */
|
|
val = 7000;
|
|
}
|
|
|
|
ret = max30102_get_current_idx(val, ®);
|
|
if (ret) {
|
|
dev_err(dev, "invalid IR LED current setting %d\n", val);
|
|
return ret;
|
|
}
|
|
|
|
return regmap_write(data->regmap, MAX30102_REG_IR_LED_CONFIG, reg);
|
|
}
|
|
|
|
static int max30102_chip_init(struct max30102_data *data)
|
|
{
|
|
int ret;
|
|
|
|
/* setup LED current settings */
|
|
ret = max30102_led_init(data);
|
|
if (ret)
|
|
return ret;
|
|
|
|
/* configure 18-bit HR + SpO2 readings at 400Hz */
|
|
ret = regmap_write(data->regmap, MAX30102_REG_SPO2_CONFIG,
|
|
(MAX30102_REG_SPO2_CONFIG_ADC_4096_STEPS
|
|
<< MAX30102_REG_SPO2_CONFIG_ADC_MASK_SHIFT) |
|
|
(MAX30102_REG_SPO2_CONFIG_SR_400HZ
|
|
<< MAX30102_REG_SPO2_CONFIG_SR_MASK_SHIFT) |
|
|
MAX30102_REG_SPO2_CONFIG_PULSE_411_US);
|
|
if (ret)
|
|
return ret;
|
|
|
|
/* average 4 samples + generate FIFO interrupt */
|
|
ret = regmap_write(data->regmap, MAX30102_REG_FIFO_CONFIG,
|
|
(MAX30102_REG_FIFO_CONFIG_AVG_4SAMPLES
|
|
<< MAX30102_REG_FIFO_CONFIG_AVG_SHIFT) |
|
|
MAX30102_REG_FIFO_CONFIG_AFULL);
|
|
if (ret)
|
|
return ret;
|
|
|
|
/* enable FIFO interrupt */
|
|
return regmap_update_bits(data->regmap, MAX30102_REG_INT_ENABLE,
|
|
MAX30102_REG_INT_ENABLE_MASK,
|
|
MAX30102_REG_INT_ENABLE_FIFO_EN);
|
|
}
|
|
|
|
static int max30102_read_temp(struct max30102_data *data, int *val)
|
|
{
|
|
int ret;
|
|
unsigned int reg;
|
|
|
|
ret = regmap_read(data->regmap, MAX30102_REG_TEMP_INTEGER, ®);
|
|
if (ret < 0)
|
|
return ret;
|
|
*val = reg << 4;
|
|
|
|
ret = regmap_read(data->regmap, MAX30102_REG_TEMP_FRACTION, ®);
|
|
if (ret < 0)
|
|
return ret;
|
|
|
|
*val |= reg & 0xf;
|
|
*val = sign_extend32(*val, 11);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int max30102_get_temp(struct max30102_data *data, int *val, bool en)
|
|
{
|
|
int ret;
|
|
|
|
if (en) {
|
|
ret = max30102_set_power(data, true);
|
|
if (ret)
|
|
return ret;
|
|
}
|
|
|
|
/* start acquisition */
|
|
ret = regmap_update_bits(data->regmap, MAX30102_REG_TEMP_CONFIG,
|
|
MAX30102_REG_TEMP_CONFIG_TEMP_EN,
|
|
MAX30102_REG_TEMP_CONFIG_TEMP_EN);
|
|
if (ret)
|
|
goto out;
|
|
|
|
msleep(35);
|
|
ret = max30102_read_temp(data, val);
|
|
|
|
out:
|
|
if (en)
|
|
max30102_set_power(data, false);
|
|
|
|
return ret;
|
|
}
|
|
|
|
static int max30102_read_raw(struct iio_dev *indio_dev,
|
|
struct iio_chan_spec const *chan,
|
|
int *val, int *val2, long mask)
|
|
{
|
|
struct max30102_data *data = iio_priv(indio_dev);
|
|
int ret = -EINVAL;
|
|
|
|
switch (mask) {
|
|
case IIO_CHAN_INFO_RAW:
|
|
/*
|
|
* Temperature reading can only be acquired when not in
|
|
* shutdown; leave shutdown briefly when buffer not running
|
|
*/
|
|
mutex_lock(&indio_dev->mlock);
|
|
if (!iio_buffer_enabled(indio_dev))
|
|
ret = max30102_get_temp(data, val, true);
|
|
else
|
|
ret = max30102_get_temp(data, val, false);
|
|
mutex_unlock(&indio_dev->mlock);
|
|
if (ret)
|
|
return ret;
|
|
|
|
ret = IIO_VAL_INT;
|
|
break;
|
|
case IIO_CHAN_INFO_SCALE:
|
|
*val = 1000; /* 62.5 */
|
|
*val2 = 16;
|
|
ret = IIO_VAL_FRACTIONAL;
|
|
break;
|
|
}
|
|
|
|
return ret;
|
|
}
|
|
|
|
static const struct iio_info max30102_info = {
|
|
.read_raw = max30102_read_raw,
|
|
};
|
|
|
|
static int max30102_probe(struct i2c_client *client,
|
|
const struct i2c_device_id *id)
|
|
{
|
|
struct max30102_data *data;
|
|
struct iio_buffer *buffer;
|
|
struct iio_dev *indio_dev;
|
|
int ret;
|
|
unsigned int reg;
|
|
|
|
indio_dev = devm_iio_device_alloc(&client->dev, sizeof(*data));
|
|
if (!indio_dev)
|
|
return -ENOMEM;
|
|
|
|
buffer = devm_iio_kfifo_allocate(&client->dev);
|
|
if (!buffer)
|
|
return -ENOMEM;
|
|
|
|
iio_device_attach_buffer(indio_dev, buffer);
|
|
|
|
indio_dev->name = MAX30102_DRV_NAME;
|
|
indio_dev->info = &max30102_info;
|
|
indio_dev->modes = (INDIO_BUFFER_SOFTWARE | INDIO_DIRECT_MODE);
|
|
indio_dev->setup_ops = &max30102_buffer_setup_ops;
|
|
|
|
data = iio_priv(indio_dev);
|
|
data->indio_dev = indio_dev;
|
|
data->client = client;
|
|
data->chip_id = id->driver_data;
|
|
|
|
mutex_init(&data->lock);
|
|
i2c_set_clientdata(client, indio_dev);
|
|
|
|
switch (data->chip_id) {
|
|
case max30105:
|
|
indio_dev->channels = max30105_channels;
|
|
indio_dev->num_channels = ARRAY_SIZE(max30105_channels);
|
|
indio_dev->available_scan_masks = max30105_scan_masks;
|
|
break;
|
|
case max30102:
|
|
indio_dev->channels = max30102_channels;
|
|
indio_dev->num_channels = ARRAY_SIZE(max30102_channels);
|
|
indio_dev->available_scan_masks = max30102_scan_masks;
|
|
break;
|
|
default:
|
|
return -ENODEV;
|
|
}
|
|
|
|
data->regmap = devm_regmap_init_i2c(client, &max30102_regmap_config);
|
|
if (IS_ERR(data->regmap)) {
|
|
dev_err(&client->dev, "regmap initialization failed\n");
|
|
return PTR_ERR(data->regmap);
|
|
}
|
|
|
|
/* check part ID */
|
|
ret = regmap_read(data->regmap, MAX30102_REG_PART_ID, ®);
|
|
if (ret)
|
|
return ret;
|
|
if (reg != MAX30102_PART_NUMBER)
|
|
return -ENODEV;
|
|
|
|
/* show revision ID */
|
|
ret = regmap_read(data->regmap, MAX30102_REG_REV_ID, ®);
|
|
if (ret)
|
|
return ret;
|
|
dev_dbg(&client->dev, "max3010x revision %02x\n", reg);
|
|
|
|
/* clear mode setting, chip shutdown */
|
|
ret = max30102_set_powermode(data, MAX30102_REG_MODE_CONFIG_MODE_NONE,
|
|
false);
|
|
if (ret)
|
|
return ret;
|
|
|
|
ret = max30102_chip_init(data);
|
|
if (ret)
|
|
return ret;
|
|
|
|
if (client->irq <= 0) {
|
|
dev_err(&client->dev, "no valid irq defined\n");
|
|
return -EINVAL;
|
|
}
|
|
|
|
ret = devm_request_threaded_irq(&client->dev, client->irq,
|
|
NULL, max30102_interrupt_handler,
|
|
IRQF_TRIGGER_FALLING | IRQF_ONESHOT,
|
|
"max30102_irq", indio_dev);
|
|
if (ret) {
|
|
dev_err(&client->dev, "request irq (%d) failed\n", client->irq);
|
|
return ret;
|
|
}
|
|
|
|
return iio_device_register(indio_dev);
|
|
}
|
|
|
|
static int max30102_remove(struct i2c_client *client)
|
|
{
|
|
struct iio_dev *indio_dev = i2c_get_clientdata(client);
|
|
struct max30102_data *data = iio_priv(indio_dev);
|
|
|
|
iio_device_unregister(indio_dev);
|
|
max30102_set_power(data, false);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static const struct i2c_device_id max30102_id[] = {
|
|
{ "max30102", max30102 },
|
|
{ "max30105", max30105 },
|
|
{}
|
|
};
|
|
MODULE_DEVICE_TABLE(i2c, max30102_id);
|
|
|
|
static const struct of_device_id max30102_dt_ids[] = {
|
|
{ .compatible = "maxim,max30102" },
|
|
{ .compatible = "maxim,max30105" },
|
|
{ }
|
|
};
|
|
MODULE_DEVICE_TABLE(of, max30102_dt_ids);
|
|
|
|
static struct i2c_driver max30102_driver = {
|
|
.driver = {
|
|
.name = MAX30102_DRV_NAME,
|
|
.of_match_table = max30102_dt_ids,
|
|
},
|
|
.probe = max30102_probe,
|
|
.remove = max30102_remove,
|
|
.id_table = max30102_id,
|
|
};
|
|
module_i2c_driver(max30102_driver);
|
|
|
|
MODULE_AUTHOR("Matt Ranostay <matt.ranostay@konsulko.com>");
|
|
MODULE_DESCRIPTION("MAX30102 heart rate/pulse oximeter and MAX30105 particle sensor driver");
|
|
MODULE_LICENSE("GPL");
|