OpenCloudOS-Kernel/drivers/net/ethernet/stmicro/stmmac/stmmac_pci.c

314 lines
7.7 KiB
C

// SPDX-License-Identifier: GPL-2.0-only
/*******************************************************************************
This contains the functions to handle the pci driver.
Copyright (C) 2011-2012 Vayavya Labs Pvt Ltd
Author: Rayagond Kokatanur <rayagond@vayavyalabs.com>
Author: Giuseppe Cavallaro <peppe.cavallaro@st.com>
*******************************************************************************/
#include <linux/clk-provider.h>
#include <linux/pci.h>
#include <linux/dmi.h>
#include "stmmac.h"
struct stmmac_pci_info {
int (*setup)(struct pci_dev *pdev, struct plat_stmmacenet_data *plat);
};
static void common_default_data(struct plat_stmmacenet_data *plat)
{
plat->clk_csr = 2; /* clk_csr_i = 20-35MHz & MDC = clk_csr_i/16 */
plat->has_gmac = 1;
plat->force_sf_dma_mode = 1;
plat->mdio_bus_data->needs_reset = true;
/* Set default value for multicast hash bins */
plat->multicast_filter_bins = HASH_TABLE_SIZE;
/* Set default value for unicast filter entries */
plat->unicast_filter_entries = 1;
/* Set the maxmtu to a default of JUMBO_LEN */
plat->maxmtu = JUMBO_LEN;
/* Set default number of RX and TX queues to use */
plat->tx_queues_to_use = 1;
plat->rx_queues_to_use = 1;
/* Disable Priority config by default */
plat->tx_queues_cfg[0].use_prio = false;
plat->rx_queues_cfg[0].use_prio = false;
/* Disable RX queues routing by default */
plat->rx_queues_cfg[0].pkt_route = 0x0;
}
static int stmmac_default_data(struct pci_dev *pdev,
struct plat_stmmacenet_data *plat)
{
/* Set common default data first */
common_default_data(plat);
plat->bus_id = 1;
plat->phy_addr = 0;
plat->phy_interface = PHY_INTERFACE_MODE_GMII;
plat->dma_cfg->pbl = 32;
plat->dma_cfg->pblx8 = true;
/* TODO: AXI */
return 0;
}
static const struct stmmac_pci_info stmmac_pci_info = {
.setup = stmmac_default_data,
};
static int snps_gmac5_default_data(struct pci_dev *pdev,
struct plat_stmmacenet_data *plat)
{
int i;
plat->clk_csr = 5;
plat->has_gmac4 = 1;
plat->force_sf_dma_mode = 1;
plat->tso_en = 1;
plat->pmt = 1;
/* Set default value for multicast hash bins */
plat->multicast_filter_bins = HASH_TABLE_SIZE;
/* Set default value for unicast filter entries */
plat->unicast_filter_entries = 1;
/* Set the maxmtu to a default of JUMBO_LEN */
plat->maxmtu = JUMBO_LEN;
/* Set default number of RX and TX queues to use */
plat->tx_queues_to_use = 4;
plat->rx_queues_to_use = 4;
plat->tx_sched_algorithm = MTL_TX_ALGORITHM_WRR;
for (i = 0; i < plat->tx_queues_to_use; i++) {
plat->tx_queues_cfg[i].use_prio = false;
plat->tx_queues_cfg[i].mode_to_use = MTL_QUEUE_DCB;
plat->tx_queues_cfg[i].weight = 25;
if (i > 0)
plat->tx_queues_cfg[i].tbs_en = 1;
}
plat->rx_sched_algorithm = MTL_RX_ALGORITHM_SP;
for (i = 0; i < plat->rx_queues_to_use; i++) {
plat->rx_queues_cfg[i].use_prio = false;
plat->rx_queues_cfg[i].mode_to_use = MTL_QUEUE_DCB;
plat->rx_queues_cfg[i].pkt_route = 0x0;
plat->rx_queues_cfg[i].chan = i;
}
plat->bus_id = 1;
plat->phy_addr = -1;
plat->phy_interface = PHY_INTERFACE_MODE_GMII;
plat->dma_cfg->pbl = 32;
plat->dma_cfg->pblx8 = true;
/* Axi Configuration */
plat->axi = devm_kzalloc(&pdev->dev, sizeof(*plat->axi), GFP_KERNEL);
if (!plat->axi)
return -ENOMEM;
plat->axi->axi_wr_osr_lmt = 31;
plat->axi->axi_rd_osr_lmt = 31;
plat->axi->axi_fb = false;
plat->axi->axi_blen[0] = 4;
plat->axi->axi_blen[1] = 8;
plat->axi->axi_blen[2] = 16;
plat->axi->axi_blen[3] = 32;
return 0;
}
static const struct stmmac_pci_info snps_gmac5_pci_info = {
.setup = snps_gmac5_default_data,
};
/**
* stmmac_pci_probe
*
* @pdev: pci device pointer
* @id: pointer to table of device id/id's.
*
* Description: This probing function gets called for all PCI devices which
* match the ID table and are not "owned" by other driver yet. This function
* gets passed a "struct pci_dev *" for each device whose entry in the ID table
* matches the device. The probe functions returns zero when the driver choose
* to take "ownership" of the device or an error code(-ve no) otherwise.
*/
static int stmmac_pci_probe(struct pci_dev *pdev,
const struct pci_device_id *id)
{
struct stmmac_pci_info *info = (struct stmmac_pci_info *)id->driver_data;
struct plat_stmmacenet_data *plat;
struct stmmac_resources res;
int i;
int ret;
plat = devm_kzalloc(&pdev->dev, sizeof(*plat), GFP_KERNEL);
if (!plat)
return -ENOMEM;
plat->mdio_bus_data = devm_kzalloc(&pdev->dev,
sizeof(*plat->mdio_bus_data),
GFP_KERNEL);
if (!plat->mdio_bus_data)
return -ENOMEM;
plat->dma_cfg = devm_kzalloc(&pdev->dev, sizeof(*plat->dma_cfg),
GFP_KERNEL);
if (!plat->dma_cfg)
return -ENOMEM;
plat->safety_feat_cfg = devm_kzalloc(&pdev->dev,
sizeof(*plat->safety_feat_cfg),
GFP_KERNEL);
if (!plat->safety_feat_cfg)
return -ENOMEM;
/* Enable pci device */
ret = pcim_enable_device(pdev);
if (ret) {
dev_err(&pdev->dev, "%s: ERROR: failed to enable device\n",
__func__);
return ret;
}
/* Get the base address of device */
for (i = 0; i < PCI_STD_NUM_BARS; i++) {
if (pci_resource_len(pdev, i) == 0)
continue;
ret = pcim_iomap_regions(pdev, BIT(i), pci_name(pdev));
if (ret)
return ret;
break;
}
pci_set_master(pdev);
ret = info->setup(pdev, plat);
if (ret)
return ret;
memset(&res, 0, sizeof(res));
res.addr = pcim_iomap_table(pdev)[i];
res.wol_irq = pdev->irq;
res.irq = pdev->irq;
plat->safety_feat_cfg->tsoee = 1;
plat->safety_feat_cfg->mrxpee = 1;
plat->safety_feat_cfg->mestee = 1;
plat->safety_feat_cfg->mrxee = 1;
plat->safety_feat_cfg->mtxee = 1;
plat->safety_feat_cfg->epsi = 1;
plat->safety_feat_cfg->edpp = 1;
plat->safety_feat_cfg->prtyen = 1;
plat->safety_feat_cfg->tmouten = 1;
return stmmac_dvr_probe(&pdev->dev, plat, &res);
}
/**
* stmmac_pci_remove
*
* @pdev: platform device pointer
* Description: this function calls the main to free the net resources
* and releases the PCI resources.
*/
static void stmmac_pci_remove(struct pci_dev *pdev)
{
int i;
stmmac_dvr_remove(&pdev->dev);
for (i = 0; i < PCI_STD_NUM_BARS; i++) {
if (pci_resource_len(pdev, i) == 0)
continue;
pcim_iounmap_regions(pdev, BIT(i));
break;
}
}
static int __maybe_unused stmmac_pci_suspend(struct device *dev)
{
struct pci_dev *pdev = to_pci_dev(dev);
int ret;
ret = stmmac_suspend(dev);
if (ret)
return ret;
ret = pci_save_state(pdev);
if (ret)
return ret;
pci_disable_device(pdev);
pci_wake_from_d3(pdev, true);
return 0;
}
static int __maybe_unused stmmac_pci_resume(struct device *dev)
{
struct pci_dev *pdev = to_pci_dev(dev);
int ret;
pci_restore_state(pdev);
pci_set_power_state(pdev, PCI_D0);
ret = pci_enable_device(pdev);
if (ret)
return ret;
pci_set_master(pdev);
return stmmac_resume(dev);
}
static SIMPLE_DEV_PM_OPS(stmmac_pm_ops, stmmac_pci_suspend, stmmac_pci_resume);
/* synthetic ID, no official vendor */
#define PCI_VENDOR_ID_STMMAC 0x0700
#define PCI_DEVICE_ID_STMMAC_STMMAC 0x1108
#define PCI_DEVICE_ID_SYNOPSYS_GMAC5_ID 0x7102
static const struct pci_device_id stmmac_id_table[] = {
{ PCI_DEVICE_DATA(STMMAC, STMMAC, &stmmac_pci_info) },
{ PCI_DEVICE_DATA(STMICRO, MAC, &stmmac_pci_info) },
{ PCI_DEVICE_DATA(SYNOPSYS, GMAC5_ID, &snps_gmac5_pci_info) },
{}
};
MODULE_DEVICE_TABLE(pci, stmmac_id_table);
static struct pci_driver stmmac_pci_driver = {
.name = STMMAC_RESOURCE_NAME,
.id_table = stmmac_id_table,
.probe = stmmac_pci_probe,
.remove = stmmac_pci_remove,
.driver = {
.pm = &stmmac_pm_ops,
},
};
module_pci_driver(stmmac_pci_driver);
MODULE_DESCRIPTION("STMMAC 10/100/1000 Ethernet PCI driver");
MODULE_AUTHOR("Rayagond Kokatanur <rayagond.kokatanur@vayavyalabs.com>");
MODULE_AUTHOR("Giuseppe Cavallaro <peppe.cavallaro@st.com>");
MODULE_LICENSE("GPL");