OpenCloudOS-Kernel/arch/arm/boot/dts
Javier Martinez Canillas a0f6ada23f ARM: dts: am335x-baltos-ir5221: Use AM33XX_IOPAD pinmux macro
Use the pinmux IOPAD macro to define the register absolute physical
address instead of the offset from the padconf base address. This
makes the DTS easier to read since matches the addresses listed in
the Technical Reference Manual.

Also, use the mux defines instead of magic numbers for the padconf
values when defining the pinctrl lines to make it more readable.

Signed-off-by: Javier Martinez Canillas <javier@osg.samsung.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
2015-11-30 08:43:20 -08:00
..
include
Makefile ARM: DT updates for v4.4 2015-11-10 15:06:26 -08:00
aks-cdu.dts
alphascale-asm9260-devkit.dts ARM: dts: add DT for Alphascale ASM9260 SoC 2015-01-19 16:29:45 -08:00
alphascale-asm9260.dtsi ARM: dts: add DT for Alphascale ASM9260 SoC 2015-01-19 16:29:45 -08:00
alpine-db.dts ARM: dts: Alpine platform devicetree 2015-03-16 15:34:53 +01:00
alpine.dtsi ARM: dts: alpine: add internal pci 2015-04-14 01:16:13 +02:00
am33xx-clocks.dtsi ARM: SoC late changes for v4.1 2015-04-22 09:24:55 -07:00
am33xx.dtsi Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-next 2015-09-03 08:08:17 -07:00
am35xx-clocks.dtsi ARM: dts: AM35xx: fix system control module clocks 2015-06-01 10:29:35 -07:00
am43x-epos-evm.dts ARM: dts: am43xx: fix cd-gpios definition as per hardware design and dt binding docs 2015-10-12 16:49:04 -07:00
am43xx-clocks.dtsi ARM: dts: AM437X: add dpll_clksel_mac_clk node 2015-07-31 12:13:18 +03:00
am57xx-beagle-x15.dts ARM: DT updates for v4.4 2015-11-10 15:06:26 -08:00
am335x-baltos-ir5221.dts ARM: dts: am335x-baltos-ir5221: Use AM33XX_IOPAD pinmux macro 2015-11-30 08:43:20 -08:00
am335x-base0033.dts ARM: dts: am335x-base0033: Use IOPAD pinmux macro 2015-10-20 09:28:04 -07:00
am335x-bone-common.dtsi ARM: dts: am335x: fix cd-gpios definition as per hardware design and dt binding docs 2015-10-12 16:47:00 -07:00
am335x-bone.dts ARM: dts: am335x-bone-common: enable aes and sham 2015-03-06 08:56:01 -08:00
am335x-boneblack.dts ARM: dts: am335x-boneblack: Use new binding for HDMI 2015-07-14 04:15:10 -07:00
am335x-bonegreen.dts ARM: dts: Add am335x-bonegreen 2015-10-12 15:00:37 -07:00
am335x-chiliboard.dts ARM: dts: am335x: Add Chiliboard DTS 2015-03-16 13:48:06 -07:00
am335x-chilisom.dtsi ARM: dts: am335x: Add DTS for ChiliSOM module 2015-03-16 13:42:10 -07:00
am335x-evm.dts ARM: dts: am335x: fix cd-gpios definition as per hardware design and dt binding docs 2015-10-12 16:47:00 -07:00
am335x-evmsk.dts ARM: dts: am335x: fix cd-gpios definition as per hardware design and dt binding docs 2015-10-12 16:47:00 -07:00
am335x-igep0033.dtsi ARM: dts: am335x-igep0033: Use IOPAD pinmux macro 2015-10-20 09:28:04 -07:00
am335x-lxm.dts ARM: dts: am335x-lxm: Use rmii-clock-ext 2015-03-06 09:02:41 -08:00
am335x-nano.dts ARM: dts: Update Nanobone dts file 2015-03-19 10:59:28 -07:00
am335x-pepper.dts ARM: dts: Correct audio input route & set mic bias for am335x-pepper 2015-07-15 03:03:01 -07:00
am335x-phycore-som.dtsi ARM: dts: am335x-wega: Clean up regulators 2015-10-12 15:00:37 -07:00
am335x-sl50.dts ARM: dts: am335x-sl50: Add Toby-Churchill SL50 board support. 2015-05-28 09:49:50 -07:00
am335x-wega-rdk.dts ARM: dts: Add phyBOARD-WEGA-AM335x rdk 2015-07-21 03:58:26 -07:00
am335x-wega.dtsi ARM: dts: am335x-wega: Clean up regulators 2015-10-12 15:00:37 -07:00
am437x-gp-evm.dts ARM: dts: am437x-gp-evm: Add wakeup interrupt source for pixcir_i2c_ts 2015-10-20 09:28:04 -07:00
am437x-idk-evm.dts ARM: dts: am43xx: fix cd-gpios definition as per hardware design and dt binding docs 2015-10-12 16:49:04 -07:00
am437x-sk-evm.dts ARM: DT updates for v4.4 2015-11-10 15:06:26 -08:00
am3517-craneboard.dts
am3517-evm.dts
am3517.dtsi ARM: dts: add core2 padconf region for am3517 2015-05-20 10:10:43 -07:00
am3517_mt_ventoux.dts
am4372.dtsi arm: dts: am4372: add syscon phandle to cpsw node 2015-09-21 17:21:47 -07:00
animeo_ip.dts
arm-realview-pb1176.dts ARM: dts: update syscons to use simple-mfd 2015-05-11 08:55:03 +02:00
armada-38x.dtsi ARM: mvebu: add crypto related nodes to armada 38x dtsi 2015-10-09 17:07:53 +02:00
armada-39x.dtsi ARM: mvebu: use DT properties to fine-tune the L2 configuration 2015-07-09 14:25:28 +02:00
armada-370-db.dts ARM: mvebu: define crypto SRAM ranges for all armada-370 boards 2015-09-29 16:18:41 +02:00
armada-370-dlink-dns327l.dts ARM: mvebu: define crypto SRAM ranges for all armada-370 boards 2015-09-29 16:18:41 +02:00
armada-370-mirabox.dts ARM: mvebu: define crypto SRAM ranges for all armada-370 boards 2015-09-29 16:18:41 +02:00
armada-370-netgear-rn102.dts arm: mvebu: disable unused Armada RTC on ReadyNAS 102, 104 and 2120 2015-10-12 18:25:50 +02:00
armada-370-netgear-rn104.dts arm: mvebu: disable unused Armada RTC on ReadyNAS 102, 104 and 2120 2015-10-12 18:25:50 +02:00
armada-370-rd.dts ARM: mvebu: define crypto SRAM ranges for all armada-370 boards 2015-09-29 16:18:41 +02:00
armada-370-seagate-nas-2bay.dts ARM: mvebu: add DT support for Seagate NAS 2 and 4-Bay 2015-10-12 16:45:35 +02:00
armada-370-seagate-nas-4bay.dts ARM: mvebu: add DT support for Seagate NAS 2 and 4-Bay 2015-10-12 16:45:35 +02:00
armada-370-seagate-nas-xbay.dtsi ARM: mvebu: add DT support for Seagate NAS 2 and 4-Bay 2015-10-12 16:45:35 +02:00
armada-370-seagate-personal-cloud-2bay.dts ARM: mvebu: add DT support for Seagate Personal Cloud 2015-10-12 16:48:00 +02:00
armada-370-seagate-personal-cloud.dts ARM: mvebu: add DT support for Seagate Personal Cloud 2015-10-12 16:48:00 +02:00
armada-370-seagate-personal-cloud.dtsi ARM: mvebu: add DT support for Seagate Personal Cloud 2015-10-12 16:48:00 +02:00
armada-370-synology-ds213j.dts ARM: mvebu: define crypto SRAM ranges for all armada-370 boards 2015-09-29 16:18:41 +02:00
armada-370-xp.dtsi Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net 2015-07-01 14:58:07 -07:00
armada-370.dtsi ARM: mvebu: add crypto related nodes to armada 370 dtsi 2015-09-29 16:17:43 +02:00
armada-375-db.dts ARM: mvebu: define crypto SRAM ranges in armada-375-db.dts 2015-09-29 16:19:32 +02:00
armada-375.dtsi ARM: mvebu: add crypto related nodes to armada 375 dtsi 2015-09-29 16:19:11 +02:00
armada-380.dtsi ARM: mvebu: armada-380: Relicense the device tree under GPLv2+/X11 2015-01-26 19:28:12 -06:00
armada-385-db-ap.dts ARM: DT updates for v4.4 2015-11-10 15:06:26 -08:00
armada-385-linksys-caiman.dts ARM: mvebu: add support for the new Armada 385 based Linksys boards 2015-05-25 16:42:03 +02:00
armada-385-linksys-cobra.dts ARM: mvebu: add support for the new Armada 385 based Linksys boards 2015-05-25 16:42:03 +02:00
armada-385-linksys.dtsi ARM: mvebu: define crypto SRAM ranges for all armada-38x boards 2015-10-09 17:08:00 +02:00
armada-385.dtsi ARM: mvebu: armada-385: Relicense the device tree under GPLv2+/X11 2015-01-26 19:28:12 -06:00
armada-388-db.dts ARM: mvebu: define crypto SRAM ranges for all armada-38x boards 2015-10-09 17:08:00 +02:00
armada-388-gp.dts ARM: mvebu: set SW polling as SDHCI card detection on A388-GP 2015-10-16 19:17:57 +02:00
armada-388-rd.dts ARM: mvebu: define crypto SRAM ranges for all armada-38x boards 2015-10-09 17:08:00 +02:00
armada-388.dtsi ARM: mvebu: Add Device Tree description of the Armada 388 SoC 2015-01-09 09:16:05 -06:00
armada-390.dtsi ARM: mvebu: add Device Tree files for Armada 39x SoC and board 2015-03-04 15:42:34 +01:00
armada-398-db.dts ARM: mvebu: add "jedec,spi-nor" flash compatible binding 2015-05-25 16:53:40 +02:00
armada-398.dtsi ARM: mvebu: add Device Tree files for Armada 39x SoC and board 2015-03-04 15:42:34 +01:00
armada-xp-axpwifiap.dts ARM: mvebu: define crypto SRAM ranges for all armada-xp boards 2015-09-29 16:16:11 +02:00
armada-xp-db.dts ARM: mvebu: define crypto SRAM ranges for all armada-xp boards 2015-09-29 16:16:11 +02:00
armada-xp-gp.dts ARM: mvebu: define crypto SRAM ranges for all armada-xp boards 2015-09-29 16:16:11 +02:00
armada-xp-lenovo-ix4-300d.dts ARM: mvebu: define crypto SRAM ranges for all armada-xp boards 2015-09-29 16:16:11 +02:00
armada-xp-linksys-mamba.dts ARM: mvebu: define crypto SRAM ranges for all armada-xp boards 2015-09-29 16:16:11 +02:00
armada-xp-matrix.dts ARM: mvebu: define crypto SRAM ranges for all armada-xp boards 2015-09-29 16:16:11 +02:00
armada-xp-mv78230.dtsi ARM: mvebu: armada-xp-mv78230: Relicense the device tree under GPLv2+/X11 2015-01-26 19:28:13 -06:00
armada-xp-mv78260.dtsi ARM: mvebu: update Ethernet compatible string for Armada XP 2015-06-30 09:37:09 -07:00
armada-xp-mv78460.dtsi ARM: mvebu: update Ethernet compatible string for Armada XP 2015-06-30 09:37:09 -07:00
armada-xp-netgear-rn2120.dts arm: mvebu: reorder nodes under internal-regs by address in RN2120 .dts file 2015-10-12 18:27:45 +02:00
armada-xp-openblocks-ax3-4.dts ARM: mvebu: define crypto SRAM ranges for all armada-xp boards 2015-09-29 16:16:11 +02:00
armada-xp-synology-ds414.dts ARM: mvebu: define crypto SRAM ranges for all armada-xp boards 2015-09-29 16:16:11 +02:00
armada-xp.dtsi ARM: mvebu: add crypto related nodes to armada-xp.dtsi 2015-09-29 15:45:43 +02:00
armv7-m.dtsi ARM: dts: Add ARM System timer as clocksource in armv7m 2015-05-15 22:16:48 +02:00
at91-ariag25.dts
at91-ariettag25.dts ARM: at91/dt: Add Acme Arietta G25 2015-06-04 11:48:43 +02:00
at91-cosino.dtsi
at91-cosino_mega2560.dts
at91-foxg20.dts
at91-kizbox.dts ARM: at91/dt: kizbox: fix mismatch LED PWM device 2015-06-04 11:49:11 +02:00
at91-kizbox2.dts ARM: at91/dt: kizbox: use stdout-path 2015-06-04 10:00:38 +02:00
at91-kizboxmini.dts ARM: at91/dt: kizbox: use stdout-path 2015-06-04 10:00:38 +02:00
at91-qil_a9260.dts
at91-sama5d2_xplained.dts ARM: at91/dt: sama5d2_xplained: add regulator nodes 2015-10-19 17:57:43 +02:00
at91-sama5d3_xplained.dts ARM: at91/dt: sama5d3 xplained: disable pmic 2015-09-18 15:58:48 +02:00
at91-sama5d4_xplained.dts ARM: at91/dt: sama5d4 xplained: enable the led D8 2015-09-18 16:00:23 +02:00
at91-sama5d4ek.dts ARM: at91/dt: sama5d4ek: Add support of QT1070 and Maxtouch 2015-09-18 16:00:04 +02:00
at91rm9200.dtsi ARM: at91/dt: fix "disabled" property on at91rm9200 2015-10-19 17:57:41 +02:00
at91rm9200_pqfp.dtsi
at91rm9200ek.dts ARM: at91/dt: at91rm9200ek: use stdout-path 2015-06-04 10:00:38 +02:00
at91sam9g15.dtsi ARM: at91/dt: include lcd dtsi in at91sam9x5 dtsis 2015-08-07 17:33:06 +02:00
at91sam9g15ek.dts ARM: at91/dt: enable lcd support for at91sam9x5 SoCs 2015-08-07 17:33:47 +02:00
at91sam9g20.dtsi ARM: at91/dt: add SRAM nodes 2015-01-15 15:32:30 +01:00
at91sam9g20ek.dts
at91sam9g20ek_2mmc.dts
at91sam9g20ek_common.dtsi ARM: at91/dt: at91sam9g20ek: use stdout-path 2015-06-04 10:00:38 +02:00
at91sam9g25.dtsi ARM: at91: at91sam9x5/dts: add ISI dt support, include isi node, pinctrls 2015-03-04 18:36:07 +01:00
at91sam9g25ek.dts ARM: at91: at91sam9g25ek/dts: enable ISI and ov2640 2015-03-04 18:36:08 +01:00
at91sam9g35.dtsi ARM: at91/dt: include lcd dtsi in at91sam9x5 dtsis 2015-08-07 17:33:06 +02:00
at91sam9g35ek.dts ARM: at91/dt: enable lcd support for at91sam9x5 SoCs 2015-08-07 17:33:47 +02:00
at91sam9g45.dtsi ARM: at91/dt: use syscon for PMC 2015-10-19 17:57:41 +02:00
at91sam9m10g45ek.dts ARM: at91/dt: ov2640: add hsync/vsync-active property 2015-09-21 16:20:25 +02:00
at91sam9n12.dtsi ARM: at91/dt: use syscon for PMC 2015-10-19 17:57:41 +02:00
at91sam9n12ek.dts ARM: at91/dt: at91sam9n12ek: disable i2c1 2015-09-18 15:48:12 +02:00
at91sam9rl.dtsi ARM: at91/dt: use syscon for PMC 2015-10-19 17:57:41 +02:00
at91sam9rlek.dts ARM: at91/dt: at91sam9rlek: use stdout-path 2015-06-04 10:00:39 +02:00
at91sam9x5.dtsi ARM: at91/dt: use syscon for PMC 2015-10-19 17:57:41 +02:00
at91sam9x5_can.dtsi
at91sam9x5_isi.dtsi ARM: at91: at91sam9x5/dts: add ISI dt support, include isi node, pinctrls 2015-03-04 18:36:07 +01:00
at91sam9x5_lcd.dtsi ARM: at91/dt: define hlcdc node in at91sam9x5_lcd.dtsi 2015-08-07 17:32:45 +02:00
at91sam9x5_macb0.dtsi ARM: at91/dt: fix macb compatible strings 2015-03-07 22:31:21 -05:00
at91sam9x5_macb1.dtsi ARM: at91/dt: fix macb compatible strings 2015-03-07 22:31:21 -05:00
at91sam9x5_usart3.dtsi
at91sam9x5cm.dtsi ARM: at91/dt: at91sam9x5cm: enable RTC 2015-03-23 15:37:09 +01:00
at91sam9x5dm.dtsi ARM: at91/dt: at91sam9x5dm: add QT1070 touch button controller 2015-08-07 17:33:54 +02:00
at91sam9x5ek.dtsi ARM: at91/dt: ov2640: add hsync/vsync-active property 2015-09-21 16:20:25 +02:00
at91sam9x25.dtsi
at91sam9x25ek.dts
at91sam9x35.dtsi ARM: at91/dt: include lcd dtsi in at91sam9x5 dtsis 2015-08-07 17:33:06 +02:00
at91sam9x35ek.dts ARM: at91/dt: enable lcd support for at91sam9x5 SoCs 2015-08-07 17:33:47 +02:00
at91sam9xe.dtsi ARM: at91/dt: Add a dtsi for at91sam9xe 2015-01-15 15:33:20 +01:00
at91sam9260.dtsi ARM: at91/dt: use syscon for PMC 2015-10-19 17:57:41 +02:00
at91sam9261.dtsi ARM: at91/dt: use syscon for PMC 2015-10-19 17:57:41 +02:00
at91sam9261ek.dts ARM: at91/dt: at91sam9261ek: use stdout-path 2015-06-04 10:00:38 +02:00
at91sam9263.dtsi ARM: at91/dt: use syscon for PMC 2015-10-19 17:57:41 +02:00
at91sam9263ek.dts ARM: at91/dt: at91sam9263ek: use stdout-path 2015-06-04 10:00:38 +02:00
atlas6-evb.dts
atlas6.dtsi
atlas7-evb.dts ARM: dts: atlas7: add a GPIO key for rearview button 2015-08-05 22:44:21 +08:00
atlas7.dtsi ARM: dts: atlas7: put pinctl property to get pinmux for NAND 2015-08-05 22:44:21 +08:00
axm55xx.dtsi
axm5516-amarillo.dts
axm5516-cpus.dtsi
axp22x.dtsi ARM: dts: sunxi: Add dtsi for AXP22x PMIC 2015-10-12 11:27:10 +02:00
axp152.dtsi ARM: dts: axp152: Add a dtsi file for the axp152 pmic 2015-07-09 10:10:05 +02:00
axp209.dtsi ARM: dts: axp209: Add usb_power_supply child node to the ax209 node 2015-09-29 09:52:50 +02:00
bcm-cygnus-clock.dtsi ARM: dts: enable clock support for Broadcom Cygnus 2015-07-07 18:08:18 -07:00
bcm-cygnus.dtsi ARM: dts: move aliases back to .dts in Cygnus 2015-09-24 18:30:10 -07:00
bcm-nsp.dtsi ARM: NSP: add minimal Northstar Plus device tree 2015-09-14 15:48:02 -07:00
bcm9hmidc.dtsi ARM: dts: enable touchscreen support on Cygnus 2015-09-22 17:50:36 -07:00
bcm2835-rpi-a-plus.dts ARM: bcm2835: dt: Add Raspberry Pi Model A+ 2015-10-14 15:35:58 -07:00
bcm2835-rpi-b-plus.dts ARM: bcm2835: dt: Use pinctrl header 2015-05-14 10:02:31 +01:00
bcm2835-rpi-b-rev2.dts ARM: bcm2835: dt: Add Raspberry Pi Model B rev2 2015-10-14 15:35:56 -07:00
bcm2835-rpi-b.dts ARM: bcm2835: dt: Raspberry Pi Model B had no I2S 2015-10-14 15:35:51 -07:00
bcm2835-rpi.dtsi ARM: bcm2835: Add the DDC I2C controller to the device tree. 2015-10-23 10:04:02 +01:00
bcm2835.dtsi ARM: bcm2835: Add the DDC I2C controller to the device tree. 2015-10-23 10:04:02 +01:00
bcm4708-asus-rt-ac56u.dts ARM: BCM5301X: add NAND flash chip description 2015-06-06 16:05:50 -07:00
bcm4708-asus-rt-ac68u.dts ARM: BCM5301X: add NAND flash chip description 2015-06-06 16:05:50 -07:00
bcm4708-buffalo-wzr-1750dhp.dts ARM: BCM5301X: Enable UART0 on tested devices 2015-07-07 18:08:57 -07:00
bcm4708-luxul-xwc-1000.dts ARM: BCM5301X: Enable UART0 on tested devices 2015-07-07 18:08:57 -07:00
bcm4708-netgear-r6250.dts ARM: BCM5301X: Netgear R6250 add USB GPIO 2015-09-21 10:36:53 -07:00
bcm4708-netgear-r6300-v2.dts ARM: BCM5301X: add NAND flash chip description 2015-06-06 16:05:50 -07:00
bcm4708-smartrg-sr400ac.dts ARM: BCM5301X: Enable UART0 on tested devices 2015-07-07 18:08:57 -07:00
bcm4708.dtsi
bcm4709-asus-rt-ac87u.dts ARM: BCM5301X: add NAND flash chip description for Asus RT-AC87U 2015-09-14 15:48:03 -07:00
bcm4709-buffalo-wxr-1900dhp.dts ARM: BCM5301X: add NAND flash chip description 2015-06-06 16:05:50 -07:00
bcm4709-netgear-r7000.dts ARM: BCM5301X: Add DT for Netgear R7000 2015-09-14 15:48:03 -07:00
bcm4709-netgear-r8000.dts ARM: BCM5301X: add NAND flash chip description 2015-06-06 16:05:50 -07:00
bcm5301x-nand-cs0-bch8.dtsi ARM: BCM5301X: add NAND flash chip description 2015-06-06 16:05:50 -07:00
bcm5301x.dtsi ARM: BCM5301X: Add profiling support 2015-08-11 15:17:24 +02:00
bcm7445-bcm97445svmb.dts ARM: bcm7445: add NAND to DTS 2015-05-13 10:56:22 -07:00
bcm7445.dtsi ARM: dts: brcmstb: add BCM7445 system PM DT nodes 2015-09-14 15:48:05 -07:00
bcm11351.dtsi
bcm21664-garnet.dts
bcm21664.dtsi
bcm28155-ap.dts
bcm47081-asus-rt-n18u.dts ARM: BCM5301X: add NAND flash chip description 2015-06-06 16:05:50 -07:00
bcm47081-buffalo-wzr-600dhp2.dts ARM: BCM5301X: Enable UART0 on tested devices 2015-07-07 18:08:57 -07:00
bcm47081-buffalo-wzr-900dhp.dts ARM: BCM5301X: add NAND flash chip description 2015-06-06 16:05:50 -07:00
bcm47081.dtsi
bcm59056.dtsi
bcm63138.dtsi ARM: dts: BCM63xx: re-parent NAND controller node 2015-05-27 09:57:34 -07:00
bcm911360_entphn.dts ARM: dts: Enable NAND support on bcm911360_entphn 2015-09-22 17:50:36 -07:00
bcm911360k.dts ARM: dts: move aliases back to .dts in Cygnus 2015-09-24 18:30:10 -07:00
bcm958300k.dts ARM: dts: move aliases back to .dts in Cygnus 2015-09-24 18:30:10 -07:00
bcm958305k.dts ARM: dts: move aliases back to .dts in Cygnus 2015-09-24 18:30:10 -07:00
bcm958625k.dts ARM: NSP: add minimal Northstar Plus device tree 2015-09-14 15:48:02 -07:00
bcm963138dvt.dts ARM: bcm63138: add NAND DT support 2015-05-13 10:56:46 -07:00
berlin2-sony-nsz-gs7.dts arm: dts: berlin: use stdout-path 2015-09-20 12:50:40 +02:00
berlin2.dtsi ARM: berlin: add a PWM node on the BG2 2015-10-05 20:09:22 +02:00
berlin2cd-google-chromecast.dts arm: dts: berlin: use stdout-path 2015-09-20 12:50:40 +02:00
berlin2cd.dtsi ARM: berlin: add a PWM node on the BG2CD 2015-10-05 20:09:26 +02:00
berlin2q-marvell-dmp.dts arm: dts: berlin: use stdout-path 2015-09-20 12:50:40 +02:00
berlin2q.dtsi ARM: DT updates for v4.4 2015-11-10 15:06:26 -08:00
cros-adc-thermistors.dtsi
cros-ec-keyboard.dtsi ARM: dts: cros-ec-keyboard: Add support for some Japanese keys 2015-07-13 23:44:44 +02:00
cros-ec-sbs.dtsi ARM: dts: Add sbs-battery dts fragment used by chromebooks 2015-07-15 15:55:19 +02:00
cx92755.dtsi ARM: digicolor: add pinctrl module device node 2015-10-15 22:37:08 +02:00
cx92755_equinox.dts ARM: digicolor: dts: add uart pin configuration 2015-10-15 22:37:15 +02:00
da850-enbw-cmc.dts
da850-evm.dts
da850.dtsi
dm814x-clocks.dtsi ARM: dts: Add minimal clocks for dm814x 2015-07-23 22:33:18 -07:00
dm814x.dtsi ARM: dts: Fix dm814x control base to properly initialize Ethernet PHY 2015-09-14 12:12:15 -07:00
dm816x-clocks.dtsi ARM: dts: Add basic clocks for dm816x 2015-01-19 11:47:35 -08:00
dm816x.dtsi ARM: dts: Remove L3 compatible value for dm816x 2015-07-14 04:15:11 -07:00
dm8148-evm.dts ARM: dts: Fix dm814x control base to properly initialize Ethernet PHY 2015-09-14 12:12:15 -07:00
dm8148-t410.dts ARM: dts: Fixup model name for HP t410 dts 2015-09-14 13:33:47 -07:00
dm8168-evm.dts ARM: DT updates for v4.1 2015-04-22 09:09:46 -07:00
dove-cm-a510.dtsi ARM: dts: dove: Add proper support for Compulab CM-A510/SBC-A510 2015-05-11 14:56:54 +02:00
dove-cubox-es.dts
dove-cubox.dts ARM: dove: Add clock-names to CuBox Si5351 clk generator 2015-05-11 15:17:47 +02:00
dove-d2plug.dts
dove-d3plug.dts
dove-dove-db.dts
dove-sbc-a510.dts ARM: dts: dove: Add proper support for Compulab CM-A510/SBC-A510 2015-05-11 14:56:54 +02:00
dove.dtsi ARM: mvebu: modify Orion and Kirkwoord crypto compatible strings 2015-10-09 17:08:02 +02:00
dra7-evm.dts ARM: dts: dra7xx: am57xx: fix cd-gpios definition as per hardware design and dt binding docs 2015-10-12 16:49:12 -07:00
dra7.dtsi ARM: DT updates for v4.4 2015-11-10 15:06:26 -08:00
dra7xx-clocks.dtsi arm/dts: dra7xx: add 'ti,set-rate-parent' for dss_dss_clk 2015-06-04 09:01:23 +03:00
dra72-evm.dts ARM: dts: dra72-evm: remove cpsw gpio hogging and add mode-gpios 2015-10-20 09:16:21 -07:00
dra72x.dtsi ARM: dts: DRA72x: Add IPC sub-mailbox nodes for IPU1, IPU2 & DSP1 2015-10-12 15:00:37 -07:00
dra74x.dtsi ARM: dts: DRA74x: Add IOMMU nodes for DSP2 2015-10-12 15:53:47 -07:00
ea3250.dts
ecx-2000.dts
ecx-common.dtsi
efm32gg-dk3750.dts ARM: efm32: switch to properly namespaced location property 2015-09-10 10:02:31 +02:00
efm32gg.dtsi ARM: efm32: switch to vendor,device compatible strings 2015-09-10 10:02:38 +02:00
elpida_ecb240abacn.dtsi
emev2-kzm9d.dts ARM: dts: fix gpio-keys wakeup-source property 2015-10-22 09:53:57 -07:00
emev2.dtsi ARM: shmobile: emev2: add IIC cores to dtsi 2015-07-15 09:12:00 +09:00
ethernut5.dts ARM: at91/dt: ethernut5: use at91sam9xe.dtsi 2015-01-15 15:33:21 +01:00
evk-pro3.dts
exynos4-cpu-thermal.dtsi ARM: dts: define default thermal-zones for exynos4 2015-02-27 05:22:58 +09:00
exynos4.dtsi ARM: dts: Add DMA support for serial ports in exynos4 2015-09-13 10:30:19 +09:00
exynos4x12-pinctrl.dtsi ARM: dts: Add labels to exynos4 nodes 2015-06-03 09:56:21 +09:00
exynos4x12.dtsi ARM: dts: add sysmmu nodes for exynos4 2015-06-04 08:09:41 +09:00
exynos5.dtsi ARM: dts: Add labels to exynos5 nodes 2015-06-03 09:56:47 +09:00
exynos3250-monk.dts ARM: dts: Add vbus regulator to USB2 phy nodes on exynos3250, exynos4210 and exynos4412 boards 2015-10-24 04:31:23 +09:00
exynos3250-pinctrl.dtsi
exynos3250-rinato.dts ARM: dts: Add vbus regulator to USB2 phy nodes on exynos3250, exynos4210 and exynos4412 boards 2015-10-24 04:31:23 +09:00
exynos3250.dtsi ARM: dts: use exynos5420-dw-mshc compatible for exynos3250 2015-10-24 03:42:02 +09:00
exynos4210-origen.dts ARM: dts: Use GPIO constants for flags cells in exynos4120 boards 2015-10-08 07:39:58 +09:00
exynos4210-pinctrl.dtsi
exynos4210-smdkv310.dts ARM: dts: Use GPIO constants for flags cells in exynos4120 boards 2015-10-08 07:39:58 +09:00
exynos4210-trats.dts ARM: dts: Add vbus regulator to USB2 phy nodes on exynos3250, exynos4210 and exynos4412 boards 2015-10-24 04:31:23 +09:00
exynos4210-universal_c210.dts ARM: dts: Add vbus regulator to USB2 phy nodes on exynos3250, exynos4210 and exynos4412 boards 2015-10-24 04:31:23 +09:00
exynos4210.dtsi ARM: dts: add CPU OPP and regulator supply property for exynos4210 2015-07-21 12:32:29 +09:00
exynos4212.dtsi ARM: dts: add CPU OPP and regulator supply property for exynos4x12 2015-08-14 02:06:15 +09:00
exynos4412-odroid-common.dtsi ARM: dts: Use GPIO constants for flags cells in exynos4412 boards 2015-10-08 07:39:58 +09:00
exynos4412-odroidu3.dts ARM: dts: Use GPIO constants for flags cells in exynos4412 boards 2015-10-08 07:39:58 +09:00
exynos4412-odroidx.dts ARM: dts: Use GPIO constants for flags cells in exynos4412 boards 2015-10-08 07:39:58 +09:00
exynos4412-odroidx2.dts ARM: dts: Switch Odroid X2/U2 to simple-audio-card 2015-02-09 14:18:20 +08:00
exynos4412-origen.dts ARM: dts: Use GPIO constants for flags cells in exynos4412 boards 2015-10-08 07:39:58 +09:00
exynos4412-smdk4412.dts ARM: dts: Use labels for overriding nodes in exynos4412-smdk4412 2015-06-03 09:56:43 +09:00
exynos4412-tiny4412.dts ARM: dts: Use GPIO constants for flags cells in exynos4412 boards 2015-10-08 07:39:58 +09:00
exynos4412-tmu-sensor-conf.dtsi ARM: dts: add TMU default definitions for exynos4412 2015-02-27 05:22:56 +09:00
exynos4412-trats2.dts ARM: dts: Add vbus regulator to USB2 phy nodes on exynos3250, exynos4210 and exynos4412 boards 2015-10-24 04:31:23 +09:00
exynos4412.dtsi ARM: dts: add suspend opp to exynos4412 2015-09-17 07:46:28 +09:00
exynos4415-pinctrl.dtsi
exynos4415.dtsi ARM: dts: add sysmmu nodes for exynos4415 2015-06-04 08:09:41 +09:00
exynos5250-arndale.dts ARM: dts: Move display-timings node from fimd to dp in exynos5250-arndale, smdk5250 and smdk5420 2015-10-06 10:47:08 +09:00
exynos5250-pinctrl.dtsi ARM: dts: Extend exynos5250-pinctrl nodes using labels instead of paths 2015-07-21 12:59:17 +09:00
exynos5250-smdk5250.dts Merge branch 'next/arm64' into next/dt 2015-11-09 16:35:19 -08:00
exynos5250-snow-common.dtsi ARM: dts: Add Exynos5250 Snow Rev5+ support on exynos5250-snow-rev5 2015-09-30 15:54:14 +09:00
exynos5250-snow-rev5.dts ARM: dts: Add Exynos5250 Snow Rev5+ support on exynos5250-snow-rev5 2015-09-30 15:54:14 +09:00
exynos5250-snow.dts ARM: dts: Add Exynos5250 Snow Rev5+ support on exynos5250-snow-rev5 2015-09-30 15:54:14 +09:00
exynos5250-spring.dts ARM: dts: add CPU OPP and regulator supply property for exynos5250 2015-08-14 02:06:02 +09:00
exynos5250.dtsi ARM: dts: Add clocks to DISP1 domain in exynos5250 2015-10-24 04:31:47 +09:00
exynos5260-pinctrl.dtsi
exynos5260-xyref5260.dts ARM: Show proper respect for Heinrich Hertz by using the correct unit for frequency 2015-05-14 16:22:05 +01:00
exynos5260.dtsi
exynos5410-smdk5410.dts ARM: dts: Clean up indentation for exynos5410-smdk5410 2015-07-21 12:55:00 +09:00
exynos5410.dtsi
exynos5420-arndale-octa.dts ARM: dts: Use GPIO constants for flags cells in exynos5420/5422/5800 boards 2015-10-08 07:39:58 +09:00
exynos5420-peach-pit.dts ARM: DT updates for v4.4 2015-11-10 15:06:26 -08:00
exynos5420-pinctrl.dtsi ARM: dts: Extend exynos5420-pinctrl nodes using labels instead of paths 2015-07-21 13:01:23 +09:00
exynos5420-smdk5420.dts ARM: dts: Use GPIO constants for flags cells in exynos5420/5422/5800 boards 2015-10-08 07:39:58 +09:00
exynos5420-trip-points.dtsi ARM: dts: Fix typo in trip point temperature for exynos5420/5440 2015-05-09 03:11:21 +09:00
exynos5420.dtsi ARM: dts: Fix wrong clock binding for sysmmu_fimd1_1 on exynos5420 2015-09-29 15:39:58 +09:00
exynos5422-cpu-thermal.dtsi ARM: dts: Define default thermal-zones for exynos5422 2015-07-21 12:56:59 +09:00
exynos5422-cpus.dtsi ARM: dts: add exynos5422-cpus.dtsi to correct cpu order 2015-08-14 02:08:24 +09:00
exynos5422-odroidxu3-audio.dtsi ARM: dts: Split audio configuration to separate exynos5422-odroidxu3-audio 2015-09-17 07:49:24 +09:00
exynos5422-odroidxu3-common.dtsi ARM: dts: Use GPIO constants for flags cells in exynos5420/5422/5800 boards 2015-10-08 07:39:58 +09:00
exynos5422-odroidxu3-lite.dts ARM: dts: Add support Odroid XU4 board for exynos5422-odroidxu4 2015-09-17 07:49:30 +09:00
exynos5422-odroidxu3.dts ARM: dts: Add support Odroid XU4 board for exynos5422-odroidxu4 2015-09-17 07:49:30 +09:00
exynos5422-odroidxu4.dts ARM: dts: Add support Odroid XU4 board for exynos5422-odroidxu4 2015-09-17 07:49:30 +09:00
exynos5440-sd5v1.dts ARM: dts: Use labels for overriding nodes in exynos5440 boards 2015-06-03 09:56:52 +09:00
exynos5440-ssdk5440.dts ARM: dts: Use GPIO constants for flags cells in exynos5440 boards 2015-10-08 07:39:58 +09:00
exynos5440-tmu-sensor-conf.dtsi ARM: dts: Trip points and sensor configuration data for exynos5440 2015-02-27 05:22:58 +09:00
exynos5440-trip-points.dtsi ARM: dts: Fix typo in trip point temperature for exynos5420/5440 2015-05-09 03:11:21 +09:00
exynos5440.dtsi ARM: dts: Add labels to exynos5 nodes 2015-06-03 09:56:47 +09:00
exynos5800-peach-pi.dts ARM: DT updates for v4.4 2015-11-10 15:06:26 -08:00
exynos5800.dtsi
ge863-pro3.dtsi
hi3620-hi4511.dts ARM: hisilicon: DT: Drop console= and earlyprintk bootargs parameter 2015-10-09 17:05:57 +01:00
hi3620.dtsi
highbank.dts
hip01-ca9x2.dts ARM: dts: Add hip01-ca9x2 dts file 2015-01-21 14:35:06 -08:00
hip01.dtsi ARM: dts: Add hip01-ca9x2 dts file 2015-01-21 14:35:06 -08:00
hip04-d01.dts ARM: hisi: revert changes from hisi/hip04-dt branch 2015-06-24 17:30:39 -07:00
hip04.dtsi ARM: hisi: revert changes from hisi/hip04-dt branch 2015-06-24 17:30:39 -07:00
hisi-x5hd2-dkb.dts ARM: hisilicon: DT: Drop console= and earlyprintk bootargs parameter 2015-10-09 17:05:57 +01:00
hisi-x5hd2.dtsi
imx1-ads.dts
imx1-apf9328.dts
imx1-pinfunc.h
imx1.dtsi
imx6dl-apf6dev.dts ARM: dts: Armadeus Systems APF6 family support (i.MX6) 2015-06-03 15:04:00 +08:00
imx6dl-aristainetos2_4.dts ARM: dts: imx6: add DT for aristainetos2 board 2015-06-03 15:04:34 +08:00
imx6dl-aristainetos2_7.dts ARM: dts: imx6: add DT for aristainetos2 board 2015-06-03 15:04:34 +08:00
imx6dl-aristainetos_4.dts ARM: dts: imx6dl-aristainetos: enable backlight PWM explicitly 2015-03-30 16:43:33 +08:00
imx6dl-aristainetos_7.dts ARM: dts: imx6dl-aristainetos: enable backlight PWM explicitly 2015-03-30 16:43:33 +08:00
imx6dl-cubox-i.dts ARM: dts: cubox-i/hummingboard: Fix the license text 2015-06-03 15:04:33 +08:00
imx6dl-dfi-fs700-m60.dts
imx6dl-gw51xx.dts
imx6dl-gw52xx.dts
imx6dl-gw53xx.dts
imx6dl-gw54xx.dts
imx6dl-gw551x.dts ARM: dts: Gateworks GW5510 support (i.MX6) 2015-06-03 15:03:59 +08:00
imx6dl-gw552x.dts
imx6dl-hummingboard.dts ARM: dts: cubox-i/hummingboard: Fix the license text 2015-06-03 15:04:33 +08:00
imx6dl-nit6xlite.dts ARM: dts: imx: add Boundary Devices Nitrogen6_Lite board 2015-10-19 22:45:24 +08:00
imx6dl-nitrogen6x.dts ARM: dts: imx6dl-nitrogen6x: change manufacturer to Boundary Devices 2015-10-19 22:45:23 +08:00
imx6dl-phytec-pbab01.dts
imx6dl-phytec-pfla02.dtsi
imx6dl-pinfunc.h
imx6dl-rex-basic.dts ARM: dts: imx: add "jedec,spi-nor" flash compatible binding 2015-10-19 22:45:12 +08:00
imx6dl-riotboard.dts dts: imx6: fix sd card gpio polarity specified in device tree 2015-07-24 10:18:35 +02:00
imx6dl-sabreauto.dts
imx6dl-sabrelite.dts ARM: dts: imx6qdl-sabrelite: relicense under GPLv2/X11 2015-10-19 22:45:22 +08:00
imx6dl-sabresd.dts
imx6dl-tx6dl-comtft.dts
imx6dl-tx6u-801x.dts
imx6dl-tx6u-811x.dts
imx6dl-udoo.dts ARM: dts: imx6dl-udoo: Add board support based off imx6q-udoo 2015-01-06 19:07:11 +08:00
imx6dl-wandboard-revb1.dts
imx6dl-wandboard.dts
imx6dl.dtsi ARM: dts: imx6dl: add imx6dl gpt specific compatible string 2015-06-03 17:04:53 +08:00
imx6q-apf6dev.dts ARM: dts: Armadeus Systems APF6 family support (i.MX6) 2015-06-03 15:04:00 +08:00
imx6q-arm2.dts dts: imx6: fix sd card gpio polarity specified in device tree 2015-07-24 10:18:35 +02:00
imx6q-cm-fx6.dts
imx6q-cubox-i.dts ARM: dts: cubox-i/hummingboard: Fix the license text 2015-06-03 15:04:33 +08:00
imx6q-dfi-fs700-m60.dts
imx6q-dmo-edmqmx6.dts ARM: dts: imx: add "jedec,spi-nor" flash compatible binding 2015-10-19 22:45:12 +08:00
imx6q-gk802.dts dts: imx6: fix sd card gpio polarity specified in device tree 2015-07-24 10:18:35 +02:00
imx6q-gw51xx.dts
imx6q-gw52xx.dts
imx6q-gw53xx.dts
imx6q-gw54xx.dts
imx6q-gw551x.dts ARM: dts: Gateworks GW5510 support (i.MX6) 2015-06-03 15:03:59 +08:00
imx6q-gw552x.dts
imx6q-gw5400-a.dts ARM: dts: imx: add "jedec,spi-nor" flash compatible binding 2015-10-19 22:45:12 +08:00
imx6q-hummingboard.dts ARM: dts: cubox-i/hummingboard: Fix the license text 2015-06-03 15:04:33 +08:00
imx6q-nitrogen6_max.dts ARM: dts: imx: add Boundary Devices Nitrogen6_Max board 2015-10-19 22:45:23 +08:00
imx6q-nitrogen6x.dts ARM: dts: imx6q-nitrogen6x: change manufacturer to Boundary Devices 2015-10-19 22:45:22 +08:00
imx6q-phytec-pbab01.dts
imx6q-phytec-pfla02.dtsi
imx6q-pinfunc.h
imx6q-rex-pro.dts ARM: dts: imx: add "jedec,spi-nor" flash compatible binding 2015-10-19 22:45:12 +08:00
imx6q-sabreauto.dts
imx6q-sabrelite.dts ARM: dts: imx6qdl-sabrelite: relicense under GPLv2/X11 2015-10-19 22:45:22 +08:00
imx6q-sabresd.dts
imx6q-sbc6x.dts
imx6q-tbs2910.dts dts: imx6: fix sd card gpio polarity specified in device tree 2015-07-24 10:18:35 +02:00
imx6q-tx6q-1010-comtft.dts
imx6q-tx6q-1010.dts
imx6q-tx6q-1020-comtft.dts
imx6q-tx6q-1020.dts
imx6q-tx6q-1110.dts
imx6q-udoo.dts ARM: dts: imx6dl-udoo: Add board support based off imx6q-udoo 2015-01-06 19:07:11 +08:00
imx6q-wandboard-revb1.dts
imx6q-wandboard.dts
imx6q.dtsi ARM: dts: imx6qdl: Move existing MIPI DSI ports into a new 'ports' node 2015-03-30 16:38:51 +08:00
imx6qdl-apf6.dtsi ARM: dts: Armadeus Systems APF6 family support (i.MX6) 2015-06-03 15:04:00 +08:00
imx6qdl-apf6dev.dtsi ARM: dts: Armadeus Systems APF6 family support (i.MX6) 2015-06-03 15:04:00 +08:00
imx6qdl-aristainetos.dtsi ARM: dts: imx: add "jedec,spi-nor" flash compatible binding 2015-10-19 22:45:12 +08:00
imx6qdl-aristainetos2.dtsi ARM: dts: imx: add "jedec,spi-nor" flash compatible binding 2015-10-19 22:45:12 +08:00
imx6qdl-cubox-i.dtsi dts: imx6: fix sd card gpio polarity specified in device tree 2015-07-24 10:18:35 +02:00
imx6qdl-dfi-fs700-m60.dtsi ARM: dts: imx: add "jedec,spi-nor" flash compatible binding 2015-10-19 22:45:12 +08:00
imx6qdl-gw51xx.dtsi ARM: dts: ventana: add UHS-I support for Ventana boards 2015-07-15 10:20:33 +08:00
imx6qdl-gw52xx.dtsi ARM: DT updates for v4.3 2015-09-01 13:09:20 -07:00
imx6qdl-gw53xx.dtsi ARM: DT updates for v4.3 2015-09-01 13:09:20 -07:00
imx6qdl-gw54xx.dtsi ARM: DT updates for v4.3 2015-09-01 13:09:20 -07:00
imx6qdl-gw551x.dtsi ARM: dts: ventana: add UHS-I support for Ventana boards 2015-07-15 10:20:33 +08:00
imx6qdl-gw552x.dtsi ARM: dts: ventana: add UHS-I support for Ventana boards 2015-07-15 10:20:33 +08:00
imx6qdl-hummingboard.dtsi dts: imx6: fix sd card gpio polarity specified in device tree 2015-07-24 10:18:35 +02:00
imx6qdl-microsom-ar8035.dtsi ARM: dts: cubox-i/hummingboard: Fix the license text 2015-06-03 15:04:33 +08:00
imx6qdl-microsom.dtsi ARM: dts: cubox-i/hummingboard: Fix the license text 2015-06-03 15:04:33 +08:00
imx6qdl-nit6xlite.dtsi ARM: dts: imx: add Boundary Devices Nitrogen6_Lite board 2015-10-19 22:45:24 +08:00
imx6qdl-nitrogen6_max.dtsi ARM: dts: imx: add Boundary Devices Nitrogen6_Max board 2015-10-19 22:45:23 +08:00
imx6qdl-nitrogen6x.dtsi ARM: dts: imx6qdl-nitrogen6x: relicense under GPLv2/X11 2015-10-19 22:45:21 +08:00
imx6qdl-phytec-pbab01.dtsi
imx6qdl-phytec-pfla02.dtsi ARM: dts: imx6: phyFLEX: fix typo in "pinctrl-names" 2015-10-19 22:45:42 +08:00
imx6qdl-rex.dtsi ARM: dts: fix usb pin control for imx-rex dts 2015-09-24 05:13:40 -07:00
imx6qdl-sabreauto.dtsi ARM: dts: imx: add "jedec,spi-nor" flash compatible binding 2015-10-19 22:45:12 +08:00
imx6qdl-sabrelite.dtsi ARM: dts: imx6qdl-sabrelite: relicense under GPLv2/X11 2015-10-19 22:45:22 +08:00
imx6qdl-sabresd.dtsi ARM: dts: imx: add "jedec,spi-nor" flash compatible binding 2015-10-19 22:45:12 +08:00
imx6qdl-tx6.dtsi Linux 4.3-rc3 2015-09-29 16:28:52 -07:00
imx6qdl-udoo.dtsi ARM: dts: imx6dl-udoo: Add board support based off imx6q-udoo 2015-01-06 19:07:11 +08:00
imx6qdl-wandboard-revb1.dtsi
imx6qdl-wandboard-revc1.dtsi
imx6qdl-wandboard.dtsi dts: imx6: fix sd card gpio polarity specified in device tree 2015-07-24 10:18:35 +02:00
imx6qdl.dtsi ARM: dts: imx6: change the core clock of spdif 2015-10-19 22:45:42 +08:00
imx6sl-evk.dts ARM: dts: imx: add "jedec,spi-nor" flash compatible binding 2015-10-19 22:45:12 +08:00
imx6sl-pinfunc.h
imx6sl-warp.dts ARM: dts: imx6sl-warp: Add changes for rev1.12 2015-08-11 23:15:11 +08:00
imx6sl.dtsi ARM: dts: imx6: change the core clock of spdif 2015-10-19 22:45:42 +08:00
imx6sx-pinfunc.h
imx6sx-sabreauto.dts dts: imx6: fix sd card gpio polarity specified in device tree 2015-07-24 10:18:35 +02:00
imx6sx-sdb-reva.dts ARM: dts: imx: add "jedec,spi-nor" flash compatible binding 2015-10-19 22:45:12 +08:00
imx6sx-sdb.dts ARM: dts: imx: add "jedec,spi-nor" flash compatible binding 2015-10-19 22:45:12 +08:00
imx6sx-sdb.dtsi ARM: imx6sx-sdb: Fix typo in regulator enable GPIO property 2015-10-19 22:45:43 +08:00
imx6sx.dtsi ARM: dts: imx6: change the core clock of spdif 2015-10-19 22:45:42 +08:00
imx6ul-14x14-evk.dts ARM: dts: imx6ul-14x14-evk.dts: add tsc support 2015-10-19 22:45:14 +08:00
imx6ul-pinfunc.h ARM: dts: imx6ul: fix low case define in imx6ul-pinfunc.h 2015-08-11 23:15:20 +08:00
imx6ul.dtsi ARM: dts: imx6ul.dtsi: add TSC support 2015-10-19 22:45:14 +08:00
imx7d-pinfunc.h ARM: dts: imx7d-pinfunc: add gpio1 pad iomux settings 2015-10-19 22:45:17 +08:00
imx7d-sdb.dts ARM: dts: imx7d-sdb: add fec1 and fec2 support 2015-10-19 22:45:18 +08:00
imx7d.dtsi ARM: DT updates for v4.4 2015-11-10 15:06:26 -08:00
imx23-evk.dts
imx23-olinuxino.dts The i.MX device tree changes for 4.2: 2015-06-10 17:01:25 -07:00
imx23-pinfunc.h
imx23-stmp378x_devb.dts
imx23.dtsi ARM: mxs: enable ocotp for i.MX23 and i.MX28 2015-10-19 22:45:12 +08:00
imx25-eukrea-cpuimx25.dtsi
imx25-eukrea-mbimxsd25-baseboard-cmo-qvga.dts
imx25-eukrea-mbimxsd25-baseboard-dvi-svga.dts
imx25-eukrea-mbimxsd25-baseboard-dvi-vga.dts
imx25-eukrea-mbimxsd25-baseboard.dts
imx25-karo-tx25.dts
imx25-pdk.dts dts: imx25: fix sd card gpio polarity specified in device tree 2015-07-24 10:18:36 +02:00
imx25-pinfunc.h ARM: dts: imx25-pinfunc: Add several pinfunctions 2015-03-30 19:22:12 +08:00
imx25.dtsi ARM: dts: imx25: Add #pwm-cells to pwm4 2015-04-27 22:40:36 +08:00
imx27-apf27.dts
imx27-apf27dev.dts apf27dev: add max5821 to the dts 2015-01-05 20:43:48 +08:00
imx27-eukrea-cpuimx27.dtsi
imx27-eukrea-mbimxsd27-baseboard.dts
imx27-pdk.dts
imx27-phytec-phycard-s-rdk.dts
imx27-phytec-phycard-s-som.dtsi
imx27-phytec-phycore-rdk.dts
imx27-phytec-phycore-som.dtsi
imx27-pinfunc.h
imx27.dtsi ARM: dts: imx27.dtsi: change the clock information for usb 2015-11-18 14:07:54 +08:00
imx28-apf28.dts ARM: dts: imx28-apf28: fix mac0 gpio polarity 2015-03-30 16:38:52 +08:00
imx28-apf28dev.dts ARM: dts: imx28-apf28dev: add wakeup function to user button 2015-03-30 16:43:49 +08:00
imx28-apx4devkit.dts
imx28-cfa10036.dts ARM: mxs: fix in tree users of ssd1306 2015-06-03 15:03:57 +08:00
imx28-cfa10037.dts
imx28-cfa10049.dts
imx28-cfa10055.dts
imx28-cfa10056.dts
imx28-cfa10057.dts
imx28-cfa10058.dts
imx28-duckbill.dts
imx28-eukrea-mbmx28lc.dtsi
imx28-eukrea-mbmx283lc.dts
imx28-eukrea-mbmx287lc.dts
imx28-evk.dts ARM: dts: imx: add "jedec,spi-nor" flash compatible binding 2015-10-19 22:45:12 +08:00
imx28-m28.dtsi
imx28-m28cu3.dts
imx28-m28evk.dts ARM: dts: imx: add "jedec,spi-nor" flash compatible binding 2015-10-19 22:45:12 +08:00
imx28-pinfunc.h
imx28-sps1.dts
imx28-tx28.dts ARM: dts: set up trigger type for edt-ft5x06 interrupts 2015-09-27 17:34:01 -07:00
imx28.dtsi ARM: mxs: enable ocotp for i.MX23 and i.MX28 2015-10-19 22:45:12 +08:00
imx31-bug.dts
imx31.dtsi ARM: dts: i.MX31: fix cpu compatible value 2015-10-19 22:45:18 +08:00
imx35-eukrea-cpuimx35.dtsi
imx35-eukrea-mbimxsd35-baseboard.dts
imx35-pdk.dts
imx35-pinfunc.h
imx35.dtsi ARM: dts: i.MX35: fix cpu compatible value 2015-10-19 22:45:19 +08:00
imx50-evk.dts ARM: dts: imx: add "jedec,spi-nor" flash compatible binding 2015-10-19 22:45:12 +08:00
imx50-pinfunc.h
imx50.dtsi ARM: dts: imx: Add dr_mode host setting to all host-only usb instances 2015-03-30 16:42:23 +08:00
imx51-apf51.dts
imx51-apf51dev.dts dts: imx51: fix sd card gpio polarity specified in device tree 2015-07-24 10:18:34 +02:00
imx51-babbage.dts ARM: dts: imx51-babbage: Fix ULPI PHY reset modelling 2015-01-06 20:25:58 +08:00
imx51-digi-connectcore-jsk.dts
imx51-digi-connectcore-som.dtsi
imx51-eukrea-cpuimx51.dtsi
imx51-eukrea-mbimxsd51-baseboard.dts
imx51-pinfunc.h
imx51.dtsi ARM: dts: imx: Add dr_mode host setting to all host-only usb instances 2015-03-30 16:42:23 +08:00
imx53-ard.dts dts: imx53: fix sd card gpio polarity specified in device tree 2015-07-24 10:18:35 +02:00
imx53-m53.dtsi
imx53-m53evk.dts dts: imx53: fix sd card gpio polarity specified in device tree 2015-07-24 10:18:35 +02:00
imx53-mba53.dts
imx53-pinfunc.h
imx53-qsb-common.dtsi ARM: DT updates for v4.3 2015-09-01 13:09:20 -07:00
imx53-qsb.dts
imx53-qsrb.dts ARM: imx53: qsrb: fix PMIC interrupt level 2015-09-17 08:54:13 +08:00
imx53-smd.dts ARM: dts: imx: add "jedec,spi-nor" flash compatible binding 2015-10-19 22:45:12 +08:00
imx53-tqma53.dtsi dts: imx53: fix sd card gpio polarity specified in device tree 2015-07-24 10:18:35 +02:00
imx53-tx53-x03x.dts ARM: dts: set up trigger type for edt-ft5x06 interrupts 2015-09-27 17:34:01 -07:00
imx53-tx53-x13x.dts
imx53-tx53.dtsi dts: imx53: fix sd card gpio polarity specified in device tree 2015-07-24 10:18:35 +02:00
imx53-voipac-bsb.dts dts: imx53: fix sd card gpio polarity specified in device tree 2015-07-24 10:18:35 +02:00
imx53-voipac-dmm-668.dtsi
imx53.dtsi ARM: imx53: include IRQ dt-bindings header 2015-09-17 08:54:13 +08:00
integrator.dtsi ARM: dts: update syscons to use simple-mfd 2015-05-11 08:55:03 +02:00
integratorap.dts
integratorcp.dts
k2e-clocks.dtsi ARM: dts: keystone: fix dt bindings to use post div register for mainpll 2015-07-31 22:30:11 +02:00
k2e-evm.dts ARM: dts: keystone: Update SoC specific compatible flags 2015-10-06 09:51:09 -07:00
k2e-netcp.dtsi ARM: dts: keystone: enable accumulator channels 2015-10-13 13:42:43 -07:00
k2e.dtsi ARM: dts: keystone: Update SoC specific compatible flags 2015-10-06 09:51:09 -07:00
k2hk-clocks.dtsi ARM: dts: keystone: fix dt bindings to use post div register for mainpll 2015-07-31 22:30:11 +02:00
k2hk-evm.dts ARM: dts: keystone: Update SoC specific compatible flags 2015-10-06 09:51:09 -07:00
k2hk-netcp.dtsi ARM: dts: keystone: enable accumulator channels 2015-10-13 13:42:43 -07:00
k2hk.dtsi ARM: dts: keystone: Update SoC specific compatible flags 2015-10-06 09:51:09 -07:00
k2l-clocks.dtsi ARM: dts: keystone: fix dt bindings to use post div register for mainpll 2015-07-31 22:30:11 +02:00
k2l-evm.dts ARM: dts: keystone: Update SoC specific compatible flags 2015-10-06 09:51:09 -07:00
k2l-netcp.dtsi ARM: dts: keystone: enable accumulator channels 2015-10-13 13:42:43 -07:00
k2l.dtsi ARM: dts: keystone: Update SoC specific compatible flags 2015-10-06 09:51:09 -07:00
keystone-clocks.dtsi
keystone.dtsi ARM: dts: keystone: Update SoC specific compatible flags 2015-10-06 09:51:09 -07:00
kirkwood-98dx4122.dtsi
kirkwood-6192.dtsi
kirkwood-6281.dtsi
kirkwood-6282.dtsi
kirkwood-b3.dts ARM: kirkwood: add "jedec,spi-nor" flash compatible binding 2015-05-25 16:53:25 +02:00
kirkwood-blackarmor-nas220.dts Kirkwood: add support for Seagate BlackArmor NAS220 2015-01-05 12:03:38 -06:00
kirkwood-cloudbox.dts ARM: kirkwood: add "jedec,spi-nor" flash compatible binding 2015-05-25 16:53:25 +02:00
kirkwood-d2net.dts ARM: Kirkwood: add modes-map property to ns2-leds nodes 2015-08-28 14:06:16 +02:00
kirkwood-db-88f6281.dts
kirkwood-db-88f6282.dts
kirkwood-db.dtsi
kirkwood-dir665.dts ARM: kirkwood: add "jedec,spi-nor" flash compatible binding 2015-05-25 16:53:25 +02:00
kirkwood-dns320.dts
kirkwood-dns325.dts
kirkwood-dnskw.dtsi
kirkwood-dockstar.dts
kirkwood-dreamplug.dts ARM: kirkwood: add "jedec,spi-nor" flash compatible binding 2015-05-25 16:53:25 +02:00
kirkwood-ds109.dts
kirkwood-ds110jv10.dts
kirkwood-ds111.dts
kirkwood-ds112.dts
kirkwood-ds209.dts
kirkwood-ds210.dts
kirkwood-ds212.dts
kirkwood-ds212j.dts
kirkwood-ds409.dts
kirkwood-ds409slim.dts
kirkwood-ds411.dts
kirkwood-ds411j.dts
kirkwood-ds411slim.dts
kirkwood-goflexnet.dts
kirkwood-guruplug-server-plus.dts
kirkwood-ib62x0.dts
kirkwood-iconnect.dts
kirkwood-iomega_ix2_200.dts
kirkwood-is2.dts ARM: Kirkwood: add modes-map property to ns2-leds nodes 2015-08-28 14:06:16 +02:00
kirkwood-km_common.dtsi
kirkwood-km_fixedeth.dts
kirkwood-km_kirkwood.dts
kirkwood-laplug.dts
kirkwood-lschlv2.dts
kirkwood-lswvl.dts ARM: dts: add buffalo linkstation ls-wvl/vl 2015-07-09 15:28:06 +02:00
kirkwood-lswxl.dts ARM: dts: add buffalo linkstation ls-wxl/wsxl 2015-07-09 15:00:02 +02:00
kirkwood-lsxhl.dts
kirkwood-lsxl.dtsi ARM: kirkwood: add "jedec,spi-nor" flash compatible binding 2015-05-25 16:53:25 +02:00
kirkwood-mplcec4.dts
kirkwood-mv88f6281gtw-ge.dts ARM: kirkwood: add "jedec,spi-nor" flash compatible binding 2015-05-25 16:53:25 +02:00
kirkwood-nas2big.dts ARM: Kirkwood: add DT description for nas2big 2015-03-11 18:16:03 +01:00
kirkwood-net2big.dts ARM: Kirkwood: enable GPIO fan alarm support for 2Big Network v2 2015-03-04 14:31:34 +01:00
kirkwood-net5big.dts ARM: Kirkwood: add LED DT entries for netxbig boards 2015-11-03 08:59:27 +01:00
kirkwood-netgear_readynas_duo_v2.dts
kirkwood-netgear_readynas_nv+_v2.dts
kirkwood-netxbig.dtsi ARM: Kirkwood: add LED DT entries for netxbig boards 2015-11-03 08:59:27 +01:00
kirkwood-ns2-common.dtsi ARM: kirkwood: add "jedec,spi-nor" flash compatible binding 2015-05-25 16:53:25 +02:00
kirkwood-ns2.dts ARM: Kirkwood: add modes-map property to ns2-leds nodes 2015-08-28 14:06:16 +02:00
kirkwood-ns2lite.dts
kirkwood-ns2max.dts ARM: Kirkwood: add modes-map property to ns2-leds nodes 2015-08-28 14:06:16 +02:00
kirkwood-ns2mini.dts ARM: Kirkwood: add modes-map property to ns2-leds nodes 2015-08-28 14:06:16 +02:00
kirkwood-nsa3x0-common.dtsi
kirkwood-nsa310.dts
kirkwood-nsa310a.dts
kirkwood-nsa320.dts
kirkwood-openblocks_a6.dts
kirkwood-openblocks_a7.dts
kirkwood-openrd-base.dts
kirkwood-openrd-client.dts
kirkwood-openrd-ultimate.dts
kirkwood-openrd.dtsi
kirkwood-pogo_e02.dts ARM: Kirkwood: Added support for pogoplug e02 (pink/gray) 2015-01-21 18:35:26 -06:00
kirkwood-rd88f6192.dts ARM: kirkwood: add "jedec,spi-nor" flash compatible binding 2015-05-25 16:53:25 +02:00
kirkwood-rd88f6281-a.dts
kirkwood-rd88f6281-z0.dts
kirkwood-rd88f6281.dtsi
kirkwood-rs212.dts
kirkwood-rs409.dts
kirkwood-rs411.dts
kirkwood-sheevaplug-common.dtsi
kirkwood-sheevaplug-esata.dts
kirkwood-sheevaplug.dts
kirkwood-synology.dtsi ARM: kirkwood: add "jedec,spi-nor" flash compatible binding 2015-05-25 16:53:25 +02:00
kirkwood-t5325.dts ARM: kirkwood: add "jedec,spi-nor" flash compatible binding 2015-05-25 16:53:25 +02:00
kirkwood-topkick.dts
kirkwood-ts219-6281.dts
kirkwood-ts219-6282.dts
kirkwood-ts219.dtsi ARM: kirkwood: add "jedec,spi-nor" flash compatible binding 2015-05-25 16:53:25 +02:00
kirkwood-ts419-6281.dts
kirkwood-ts419-6282.dts
kirkwood-ts419.dtsi
kirkwood.dtsi ARM: mvebu: modify Orion and Kirkwoord crypto compatible strings 2015-10-09 17:08:02 +02:00
logicpd-torpedo-37xx-devkit.dts ARM: OMAP2+: Fix imprecise external abort caused by bogus SRAM init 2015-10-19 08:55:46 -07:00
logicpd-torpedo-som.dtsi ARM: dts: Add minimal support for LogicPD Torpedo DM3730 devkit 2015-05-20 09:23:43 -07:00
lpc18xx.dtsi ARM: dts: lpc18xx: add resets entry to device nodes 2015-09-30 22:48:58 +02:00
lpc32xx.dtsi
lpc4337-ciaa.dts ARM: dts: add DT for CIAA LPC4337 industrial computer 2015-07-14 15:12:12 +02:00
lpc4350-hitex-eval.dts ARM: dts: lpc4350-hitex-eval: add joystick, buttons and leds 2015-09-30 22:49:03 +02:00
lpc4350.dtsi ARM: dts: Add DT for Hitex LPC4350 Evaluation Board 2015-05-15 22:28:29 +02:00
lpc4357-ea4357-devkit.dts ARM: dts: lpc4357-ea4357: add i2c0 and devices 2015-09-30 22:49:00 +02:00
lpc4357.dtsi ARM: dts: Add DT for Embedded Artists LPC4357 Developers Kit 2015-05-15 22:28:21 +02:00
ls1021a-qds.dts ARM: dts: ls1021a: Enable the eTSEC ports on QDS and TWR 2015-08-11 23:15:22 +08:00
ls1021a-twr.dts ARM: dts: Add node for ina220 on LS1021ATWR 2015-10-19 22:45:17 +08:00
ls1021a.dtsi ARM: dts: ls1021a: Add quirk for Erratum A009116 2015-10-19 22:45:43 +08:00
meson.dtsi ARM: meson6: DTS: Fix wrong reg mapping and IRQ numbers 2015-10-14 22:13:07 +02:00
meson6-atv1200.dts ARM: dts: meson: enable Ethernet controller 2015-03-02 11:00:55 +01:00
meson6.dtsi
meson8-minix-neo-x8.dts ARM: dts: meson: add DTS file for MINIX NEO-X8 2015-03-02 11:01:03 +01:00
meson8.dtsi ARM: dts: meson8: add pinctrl node 2015-03-02 11:00:59 +01:00
meson8b-mxq.dts ARM: meson: Add DTS for Odroid-C1 and Tronfy MXQ boards 2015-10-08 17:21:55 +02:00
meson8b-odroidc1.dts ARM: meson: Add DTS for Odroid-C1 and Tronfy MXQ boards 2015-10-08 17:21:55 +02:00
meson8b.dtsi ARM: meson: Add DTS for Odroid-C1 and Tronfy MXQ boards 2015-10-08 17:21:55 +02:00
mmp2-brownstone.dts
mmp2.dtsi
moxart-uc7112lx.dts
moxart.dtsi
mpa1600.dts
mt6580-evbp1.dts ARM: dts: mediatek: add mt6580 basic support 2015-07-18 00:22:42 +02:00
mt6580.dtsi ARM: dts: mediatek: add mt6580 basic support 2015-07-18 00:22:42 +02:00
mt6589-aquaris5.dts ARM: mediatek: dts: Add uart to Aquaris5 2015-01-11 21:17:49 +01:00
mt6589.dtsi ARM: DTS: Add watchdog to mt6589 2015-03-30 13:18:23 +02:00
mt6592-evb.dts
mt6592.dtsi ARM: mediatek: dts: Add uart to mt6592 2015-01-20 18:09:39 +01:00
mt8127-moose.dts ARM: mediatek: dts: Add UART dts for MT8127 and MT8135 boards 2015-01-08 12:12:43 +01:00
mt8127.dtsi ARM: dts: mt8127: enable basic SMP bringup for mt8127 2015-10-12 19:10:38 +02:00
mt8135-evbp1.dts ARM: dts: mt8135-evbp1: remove regulator-compatible usage 2015-09-27 15:38:43 +02:00
mt8135-pinfunc.h ARM: dts: mt8135: Add pinctrl/GPIO/EINT node for mt8135. 2015-05-04 10:56:07 +02:00
mt8135.dtsi ARM: dts: mt8135: enable basic SMP bringup for mt8135 2015-10-12 19:10:34 +02:00
mxs-pinfunc.h
nspire-classic.dtsi devicetree: Add TI-NSPIRE USB OTG support to device tree 2015-03-04 23:44:17 +01:00
nspire-clp.dts
nspire-cx.dts devicetree: Add TI-NSPIRE USB OTG support to device tree 2015-03-04 23:44:17 +01:00
nspire-tp.dts
nspire.dtsi ARM: dts: TI-Nspire: fix cpu compatible value 2015-10-23 21:59:31 +02:00
omap-gpmc-smsc911x.dtsi
omap-gpmc-smsc9221.dtsi
omap-zoom-common.dtsi
omap2.dtsi ARM: dts: omap2: Correct the dma controller's property names 2015-02-24 10:35:43 -08:00
omap3-beagle-xm-ab.dts
omap3-beagle-xm.dts ARM: dts: Use defined GPIO constants in flags cell for OMAP2+ boards 2015-10-12 15:51:59 -07:00
omap3-beagle.dts ARM: dts: Use defined GPIO constants in flags cell for OMAP2+ boards 2015-10-12 15:51:59 -07:00
omap3-cm-t3x.dtsi ARM: dts: Use defined GPIO constants in flags cell for OMAP2+ boards 2015-10-12 15:51:59 -07:00
omap3-cm-t3x30.dtsi ARM: dts: omap3: Remove all references to ti,codec property 2015-03-16 19:24:51 -07:00
omap3-cm-t3517.dts ARM: Show proper respect for Heinrich Hertz by using the correct unit for frequency 2015-05-14 16:22:05 +01:00
omap3-cm-t3530.dts
omap3-cm-t3730.dts ARM: dts: add wl12xx/wl18xx bindings 2015-03-24 09:48:14 -07:00
omap3-devkit8000-common.dtsi ARM: dts: omap3-devkit8000: add LCD panels 2015-08-06 00:37:41 -07:00
omap3-devkit8000-lcd-common.dtsi ARM: dts: Use defined GPIO constants in flags cell for OMAP2+ boards 2015-10-12 15:51:59 -07:00
omap3-devkit8000-lcd43.dts ARM: dts: omap3-devkit8000: add LCD panels 2015-08-06 00:37:41 -07:00
omap3-devkit8000-lcd70.dts ARM: dts: omap3-devkit8000: add LCD panels 2015-08-06 00:37:41 -07:00
omap3-devkit8000.dts ARM: dts: omap3-devkit8000: add LCD panels 2015-08-06 00:37:41 -07:00
omap3-evm-37xx.dts ARM: OMAP2+: Fix imprecise external abort caused by bogus SRAM init 2015-10-19 08:55:46 -07:00
omap3-evm-common.dtsi ARM: dts: Use defined GPIO constants in flags cell for OMAP2+ boards 2015-10-12 15:51:59 -07:00
omap3-evm.dts
omap3-gta04.dtsi ARM: dts: Use defined GPIO constants in flags cell for OMAP2+ boards 2015-10-12 15:51:59 -07:00
omap3-gta04a3.dts
omap3-gta04a4.dts
omap3-gta04a5.dts ARM: dts: Use defined GPIO constants in flags cell for OMAP2+ boards 2015-10-12 15:51:59 -07:00
omap3-ha-common.dtsi
omap3-ha-lcd.dts
omap3-ha.dts
omap3-igep.dtsi ARM: dts: Update Javier Martinez Canillas's email 2015-10-20 09:28:04 -07:00
omap3-igep0020-common.dtsi ARM: dts: omap3-igep0020: Use IOPAD pinmux macro 2015-10-20 09:28:04 -07:00
omap3-igep0020-rev-f.dts ARM: dts: Update Javier Martinez Canillas's email 2015-10-20 09:28:04 -07:00
omap3-igep0020.dts ARM: dts: Update Javier Martinez Canillas's email 2015-10-20 09:28:04 -07:00
omap3-igep0030-common.dtsi ARM: dts: Update Javier Martinez Canillas's email 2015-10-20 09:28:04 -07:00
omap3-igep0030-rev-g.dts ARM: dts: Update Javier Martinez Canillas's email 2015-10-20 09:28:04 -07:00
omap3-igep0030.dts ARM: dts: Update Javier Martinez Canillas's email 2015-10-20 09:28:04 -07:00
omap3-ldp.dts ARM: dts: Use defined GPIO constants in flags cell for OMAP2+ boards 2015-10-12 15:51:59 -07:00
omap3-lilly-a83x.dtsi ARM: dts: omap3-lilly-a83x: Don't use IRQ level flag for a GPIO 2015-10-12 16:41:41 -07:00
omap3-lilly-dbb056.dts ARM: dts: Use defined GPIO constants in flags cell for OMAP2+ boards 2015-10-12 15:51:59 -07:00
omap3-n9.dts ARM: dts: n950, n9: Add primary camera support 2015-03-19 10:59:28 -07:00
omap3-n900.dts ARM: dts: Fix n900 dts file to work around 4.1 touchscreen regression on n900 2015-05-29 13:19:02 -07:00
omap3-n950-n9.dtsi ARM: dts: Use defined GPIO constants in flags cell for OMAP2+ boards 2015-10-12 15:51:59 -07:00
omap3-n950.dts ARM: dts: n950, n9: Add primary camera support 2015-03-19 10:59:28 -07:00
omap3-overo-alto35-common.dtsi
omap3-overo-alto35.dts
omap3-overo-base.dtsi ARM: dts: Use defined GPIO constants in flags cell for OMAP2+ boards 2015-10-12 15:51:59 -07:00
omap3-overo-chestnut43-common.dtsi
omap3-overo-chestnut43.dts
omap3-overo-common-dvi.dtsi
omap3-overo-common-lcd35.dtsi ARM: dts: Use defined GPIO constants in flags cell for OMAP2+ boards 2015-10-12 15:51:59 -07:00
omap3-overo-common-lcd43.dtsi ARM: dts: Use defined GPIO constants in flags cell for OMAP2+ boards 2015-10-12 15:51:59 -07:00
omap3-overo-common-peripherals.dtsi
omap3-overo-gallop43-common.dtsi
omap3-overo-gallop43.dts
omap3-overo-palo35-common.dtsi ARM: dts: overo: Add device tree for Palo35 board 2015-07-14 04:15:11 -07:00
omap3-overo-palo35.dts ARM: dts: overo: Add device tree for Palo35 board 2015-07-14 04:15:11 -07:00
omap3-overo-palo43-common.dtsi
omap3-overo-palo43.dts
omap3-overo-storm-alto35.dts
omap3-overo-storm-chestnut43.dts
omap3-overo-storm-gallop43.dts
omap3-overo-storm-palo35.dts ARM: dts: overo: Add device tree for Palo35 board 2015-07-14 04:15:11 -07:00
omap3-overo-storm-palo43.dts
omap3-overo-storm-summit.dts
omap3-overo-storm-tobi.dts
omap3-overo-storm-tobiduo.dts ARM: dts: Add DTS for Gumstix TobiDuo expansion board 2015-07-14 04:15:10 -07:00
omap3-overo-storm.dtsi
omap3-overo-summit-common.dtsi
omap3-overo-summit.dts
omap3-overo-tobi-common.dtsi
omap3-overo-tobi.dts
omap3-overo-tobiduo-common.dtsi ARM: dts: Add DTS for Gumstix TobiDuo expansion board 2015-07-14 04:15:10 -07:00
omap3-overo-tobiduo.dts ARM: dts: Add DTS for Gumstix TobiDuo expansion board 2015-07-14 04:15:10 -07:00
omap3-overo.dtsi ARM: dts: overo: Enable McBSP2 for all Overo COMs 2015-07-14 04:15:10 -07:00
omap3-pandora-1ghz.dts ARM: dts: omap3-pandora: miscellaneous corrections 2015-07-21 04:07:41 -07:00
omap3-pandora-600mhz.dts ARM: dts: omap3-pandora: miscellaneous corrections 2015-07-21 04:07:41 -07:00
omap3-pandora-common.dtsi ARM: dts: Use defined GPIO constants in flags cell for OMAP2+ boards 2015-10-12 15:51:59 -07:00
omap3-panel-sharp-ls037v7dw01.dtsi
omap3-sb-t35.dtsi
omap3-sbc-t3517.dts ARM: dts: cm-t3x: add NAND support 2015-01-13 08:00:10 -08:00
omap3-sbc-t3530.dts ARM: dts: cm-t3x: add NAND support 2015-01-13 08:00:10 -08:00
omap3-sbc-t3730.dts ARM: dts: cm-t3x: add NAND support 2015-01-13 08:00:10 -08:00
omap3-tao3530.dtsi ARM: dts: Use defined GPIO constants in flags cell for OMAP2+ boards 2015-10-12 15:51:59 -07:00
omap3-thunder.dts
omap3-zoom3.dts ARM: dts: Use defined GPIO constants in flags cell for OMAP2+ boards 2015-10-12 15:51:59 -07:00
omap3.dtsi ARM: dts: fix omap2+ address translation for pbias 2015-09-24 16:28:32 -07:00
omap3xxx-clocks.dtsi ARM: dts: omap3: add minimal l4 bus layout with control module support 2015-03-31 21:26:56 +03:00
omap4-cpu-thermal.dtsi ARM: dts: am57xx-beagle-x15: Add thermal map to include fan and tmp102 2015-03-26 12:02:12 -07:00
omap4-duovero-parlor.dts
omap4-duovero.dtsi ARM: omap: convert wakeupgen to stacked domains 2015-03-15 00:56:13 +00:00
omap4-panda-a4.dts
omap4-panda-common.dtsi ARM: dts: Use defined GPIO constants in flags cell for OMAP2+ boards 2015-10-12 15:51:59 -07:00
omap4-panda-es.dts
omap4-panda.dts
omap4-sdp-es23plus.dts
omap4-sdp.dts ARM: dts: Use defined GPIO constants in flags cell for OMAP2+ boards 2015-10-12 15:51:59 -07:00
omap4-var-dvk-om44.dts
omap4-var-om44customboard.dtsi
omap4-var-som-om44-wlan.dtsi ARM: dts: Use defined GPIO constants in flags cell for OMAP2+ boards 2015-10-12 15:51:59 -07:00
omap4-var-som-om44.dtsi ARM: dts: Use defined GPIO constants in flags cell for OMAP2+ boards 2015-10-12 15:51:59 -07:00
omap4-var-stk-om44.dts
omap4.dtsi ARM: dts: fix omap2+ address translation for pbias 2015-09-24 16:28:32 -07:00
omap5-board-common.dtsi ARM: dts: Move most of omap5-uevm.dts to omap5-board-common.dtsi 2015-10-16 12:32:32 -07:00
omap5-cm-t54.dts ARM: dts: Use defined GPIO constants in flags cell for OMAP2+ boards 2015-10-12 15:51:59 -07:00
omap5-core-thermal.dtsi ARM: dts: OMAP5: fix polling intervals for thermal zones 2015-03-06 09:07:17 -08:00
omap5-gpu-thermal.dtsi ARM: dts: OMAP5: fix polling intervals for thermal zones 2015-03-06 09:07:17 -08:00
omap5-igep0050.dts ARM: dts: Add basic support for isee igepv5 2015-10-16 12:32:33 -07:00
omap5-sbc-t54.dts
omap5-uevm.dts ARM: dts: Move most of omap5-uevm.dts to omap5-board-common.dtsi 2015-10-16 12:32:32 -07:00
omap5.dtsi ARM: dts: fix omap2+ address translation for pbias 2015-09-24 16:28:32 -07:00
omap24xx-clocks.dtsi ARM: dts: omap24xx: add minimal l4 bus layout with control module support 2015-03-31 21:26:55 +03:00
omap34xx-omap36xx-clocks.dtsi
omap34xx.dtsi Merge branch 'omap/dt' into next/late 2015-04-15 21:41:13 +02:00
omap36xx-am35xx-omap3430es2plus-clocks.dtsi
omap36xx-clocks.dtsi
omap36xx-omap3430es2plus-clocks.dtsi
omap36xx.dtsi Merge branch 'omap/dt' into next/late 2015-04-15 21:41:13 +02:00
omap44xx-clocks.dtsi
omap54xx-clocks.dtsi ARM: dts: OMAP5: Fix the bypass clock source for dpll_iva and others 2015-03-06 08:36:33 -08:00
omap443x-clocks.dtsi
omap443x.dtsi
omap446x-clocks.dtsi
omap2420-clocks.dtsi
omap2420-h4.dts
omap2420-n8x0-common.dtsi ARM: dts: Use defined GPIO constants in flags cell for OMAP2+ boards 2015-10-12 15:51:59 -07:00
omap2420-n800.dts
omap2420-n810-wimax.dts
omap2420-n810.dts
omap2420.dtsi ARM: dts: omap24xx: add minimal l4 bus layout with control module support 2015-03-31 21:26:55 +03:00
omap2430-clocks.dtsi ARM: dts: omap24xx: add minimal l4 bus layout with control module support 2015-03-31 21:26:55 +03:00
omap2430-sdp.dts
omap2430.dtsi ARM: dts: fix omap2+ address translation for pbias 2015-09-24 16:28:32 -07:00
omap3430-sdp.dts
omap3430es1-clocks.dtsi
omap4460.dtsi ARM: dts: Use defined GPIO constants in flags cell for OMAP2+ boards 2015-10-12 15:51:59 -07:00
orion5x-lacie-d2-network.dts
orion5x-lacie-ethernet-disk-mini-v2.dts
orion5x-linkstation-lswtgl.dts ARM: dts: orion5x: add buffalo linkstation ls-wtgl 2015-07-25 16:19:20 +02:00
orion5x-lswsgl.dts ARM: dts: Convert Linkstation Mini to Device Tree 2015-08-06 18:51:29 +02:00
orion5x-maxtor-shared-storage-2.dts
orion5x-mv88f5182.dtsi
orion5x-rd88f5182-nas.dts
orion5x.dtsi ARM: mvebu: use new bindings for existing crypto devices 2015-10-09 17:08:01 +02:00
phy3250.dts
picoxcell-pc3x2.dtsi
picoxcell-pc3x3.dtsi
picoxcell-pc7302-pc3x2.dts
picoxcell-pc7302-pc3x3.dts
pm9g45.dts
prima2-evb.dts
prima2.dtsi
pxa2xx.dtsi ARM: dts: pxa: add dma pxamci nodes to pxa3xx 2015-07-10 22:29:22 +02:00
pxa3xx.dtsi ARM: dts: pxa: add the usb host controller 2015-07-10 22:29:22 +02:00
pxa27x.dtsi ARM: dts: pxa: fix power i2c definition 2015-07-10 22:29:22 +02:00
pxa168-aspenite.dts
pxa168.dtsi
pxa910-dkb.dts
pxa910.dtsi
qcom-apq8064-cm-qs600.dts ARM: dts: qs600: Add SD card detect support. 2015-10-13 16:40:01 -05:00
qcom-apq8064-ifc6410.dts ARM: dts: apq8064-ifc6410: add notify led support. 2015-10-13 16:40:00 -05:00
qcom-apq8064-v2.0.dtsi
qcom-apq8064.dtsi ARM: dts: apq8064: add missing gsbi7 uart pinctrl 2015-10-13 16:39:58 -05:00
qcom-apq8074-dragonboard.dts ARM: dts: qcom: apq8074-dragonboard: Use stdout-path 2015-09-09 14:57:02 -05:00
qcom-apq8084-ifc6540.dts ARM: dts: qcom: apq8084-ifc6540: Use stdout-path 2015-09-09 14:57:17 -05:00
qcom-apq8084-mtp.dts ARM: dts: qcom: apq8084-mtp: Use stdout-path 2015-09-09 14:57:25 -05:00
qcom-apq8084.dtsi arm: dts: qcom: Add #power-domain-cells property 2015-10-13 16:40:01 -05:00
qcom-ipq8064-ap148.dts ARM: dts: qcom: ipq8064-ap148: Use stdout-path 2015-09-09 14:57:32 -05:00
qcom-ipq8064-v1.0.dtsi
qcom-ipq8064.dtsi ARM: dts: qcom: Label serial nodes for aliasing and stdout-path 2015-09-09 14:56:42 -05:00
qcom-msm8660-surf.dts ARM: dts: qcom: msm8660-surf: Use stdout-path 2015-09-09 14:57:39 -05:00
qcom-msm8660.dtsi ARM: dts: qcom: Label serial nodes for aliasing and stdout-path 2015-09-09 14:56:42 -05:00
qcom-msm8960-cdp.dts ARM: dts: qcom: msm8960-cdp: Use stdout-path 2015-09-09 14:57:46 -05:00
qcom-msm8960.dtsi ARM: dts: qcom: Label serial nodes for aliasing and stdout-path 2015-09-09 14:56:42 -05:00
qcom-msm8974-sony-xperia-honami.dts ARM: SoC: late fixes and dependencies 2015-09-10 17:59:04 -07:00
qcom-msm8974.dtsi ARM: DT updates for v4.4 2015-11-10 15:06:26 -08:00
qcom-pm8841.dtsi ARM: dts: qcom: Add PM8841 functions device nodes 2015-04-27 16:11:37 -05:00
qcom-pm8941.dtsi ARM: dts: qcom-pm8941: Add charger node 2015-10-13 16:40:02 -05:00
qcom-pma8084.dtsi ARM: dts: qcom: Add PMA8084 functions device nodes 2015-04-27 16:11:38 -05:00
r7s72100-genmai.dts
r7s72100.dtsi ARM: shmobile: r7s72100 dtsi: Add CPG/MSTP Clock Domain 2015-08-12 11:15:26 +09:00
r8a73a4-ape6evm.dts ARM: shmobile: ape6evm dts: Use generic names for device nodes 2015-05-11 15:01:27 +09:00
r8a73a4.dtsi ARM: shmobile: r8a73a4 dtsi: Add missing "gpio-ranges" to gpio node 2015-08-05 06:39:27 +09:00
r8a77xx-aa104xd12-panel.dtsi
r8a77xx-aa121td01-panel.dtsi ARM: shmobile: dts: Add common file for AA121TD01 panel 2015-10-02 15:11:20 +09:00
r8a7740-armadillo800eva.dts ARM: shmobile: armadillo800eva dts: Add pinctrl and gpio-hog for lcdc0 2015-07-06 09:33:34 +09:00
r8a7740.dtsi ARM: shmobile: r8a7740 dtsi: Add missing "gpio-ranges" to gpio node 2015-08-05 06:39:28 +09:00
r8a7778-bockw.dts ARM: shmobile: bockw dts: Replace "nor-jedec" by "jedec,spi-nor" 2015-05-21 10:27:57 +09:00
r8a7778.dtsi ARM: shmobile: r8a7778: tidyup SSI resource region 2015-09-14 10:16:46 +09:00
r8a7779-marzen.dts ARM: shmobile: marzen: Board specific serial port order 2015-09-14 10:16:36 +09:00
r8a7779.dtsi ARM: shmobile: r8a7779 dtsi: Add CPG/MSTP Clock Domain 2015-08-12 11:15:26 +09:00
r8a7790-lager.dts ARM: shmobile: r8a7790: lager: add pinmux for iic0 2015-09-14 10:16:47 +09:00
r8a7790.dtsi Merge branch 'next/arm64' into next/dt 2015-11-09 16:35:19 -08:00
r8a7791-henninger.dts ARM: shmobile: henninger dts: Replace "nor-jedec" by "jedec,spi-nor" 2015-05-21 10:27:54 +09:00
r8a7791-koelsch.dts ARM: shmobile: koelsch: use CCF for audio clock 2015-09-14 10:16:42 +09:00
r8a7791-porter.dts ARM: shmobile: porter: enable internal PCI and USB PHY 2015-10-13 10:00:12 +09:00
r8a7791.dtsi Merge branch 'next/arm64' into next/dt 2015-11-09 16:35:19 -08:00
r8a7793-gose.dts ARM: shmobile: r8a7793: add minimal Gose board device tree 2015-07-06 09:33:30 +09:00
r8a7793.dtsi ARM: shmobile: r8a7793 dtsi: Add CPG/MSTP Clock Domain 2015-08-12 11:15:27 +09:00
r8a7794-alt.dts ARM: shmobile: r8a7794: alt: Fix ethernet controller PHY IRQ line 2015-03-01 11:14:51 +09:00
r8a7794-silk.dts ARM: shmobile: silk: enable USB PHY 2015-10-02 10:22:39 +09:00
r8a7794.dtsi ARM: shmobile: r8a7794: add HS-USB DT support 2015-10-05 12:01:42 +09:00
rk3xxx.dtsi ARM: dts: rockchip: add usb phys to Cortex-A9 socs 2015-08-08 12:25:35 +02:00
rk3066a-bqcurie2.dts ARM: dts: rockchip: support highspeed sd-cards on rk3066a boards 2015-10-08 22:38:07 +02:00
rk3066a-marsboard.dts ARM: dts: rockchip: Add support for SD/MMC on MarsBoard-RK3066 2015-10-08 22:37:00 +02:00
rk3066a-rayeager.dts ARM: dts: rockchip: support highspeed sd-cards on rk3066a boards 2015-10-08 22:38:07 +02:00
rk3066a.dtsi ARM: dts: rockchip: add usb phys to Cortex-A9 socs 2015-08-08 12:25:35 +02:00
rk3188-radxarock.dts ARM: dts: rockchip: Add SPDIF optical out on Radxa Rock 2015-10-13 10:58:31 +02:00
rk3188.dtsi ARM: dts: rockchip: Add SPDIF transceiver for RK3188 2015-10-13 10:57:58 +02:00
rk3288-evb-act8846.dts ARM: dts: rockchip: relicense rk3288-evb* under GPLv2/X11 2015-05-15 12:25:54 +02:00
rk3288-evb-rk808.dts ARM: dts: rockchip: relicense rk3288-evb* under GPLv2/X11 2015-05-15 12:25:54 +02:00
rk3288-evb.dtsi ARM: dts: rockchip: add missing device_type = "memory" to boards 2015-07-16 14:21:54 +02:00
rk3288-firefly-beta.dts ARM: dts: rockchip: add dts for Firefly Firefly-RK3288 boards 2015-01-26 01:15:02 +01:00
rk3288-firefly.dts ARM: dts: rockchip: add dts for Firefly Firefly-RK3288 boards 2015-01-26 01:15:02 +01:00
rk3288-firefly.dtsi ARM: dts: rockchip: add rk3288-firefly iodomains 2015-10-08 22:40:18 +02:00
rk3288-popmetal.dts ARM: dts: rockchip: add rk3288-popmetal iodomains 2015-10-08 22:40:06 +02:00
rk3288-r89.dts ARM: dts: rockchip: add missing device_type = "memory" to boards 2015-07-16 14:21:54 +02:00
rk3288-rock2-som.dtsi ARM: dts: rockchip: Add dtb for the Radxa Rock 2 Square board 2015-10-08 22:38:17 +02:00
rk3288-rock2-square.dts ARM: dts: rockchip: Add SPDIF optical out on Radxa Rock2 Square 2015-10-13 10:59:18 +02:00
rk3288-thermal.dtsi ARM: dts: rockchip: relicense rk3288-thermal.dtsi under GPLv2/X11 2015-05-13 22:54:59 +02:00
rk3288-veyron-chromebook.dtsi ARM: dts: rockchip: add shared rk3288-veyron files 2015-07-16 13:38:43 +02:00
rk3288-veyron-jaq.dts ARM: dts: rockchip: add veyron-jaq board 2015-10-08 22:37:09 +02:00
rk3288-veyron-jerry.dts ARM: dts: rockchip: correct regulator power states for suspend 2015-08-21 01:40:35 +02:00
rk3288-veyron-minnie.dts ARM: dts: rockchip: correct regulator PM properties 2015-08-21 01:40:28 +02:00
rk3288-veyron-pinky.dts ARM: dts: rockchip: correct regulator power states for suspend 2015-08-21 01:40:35 +02:00
rk3288-veyron-sdmmc.dtsi ARM: dts: rockchip: add tuning related settings to veyron devices 2015-10-26 16:00:13 +01:00
rk3288-veyron-speedy.dts ARM: dts: rockchip: Add veyron-speedy board 2015-07-23 22:13:46 +02:00
rk3288-veyron.dtsi ARM: DT updates for v4.4 2015-11-10 15:06:26 -08:00
rk3288.dtsi ARM: DT updates for v4.4 2015-11-10 15:06:26 -08:00
s3c24xx.dtsi
s3c64xx-pinctrl.dtsi
s3c64xx.dtsi
s3c2416-pinctrl.dtsi
s3c2416-smdk2416.dts ARM: dts: s3c2416: Use labels for overriding nodes in SMDK2416 2015-06-03 09:56:54 +09:00
s3c2416.dtsi ARM: dts: Fix cpu compatible value for s3c2416 2015-09-29 15:52:58 +09:00
s3c6400.dtsi
s3c6410-mini6410.dts
s3c6410-smdk6410.dts
s3c6410.dtsi
s5pv210-aquila.dts ARM: dts: Fix typo in regulator enable GPIO property in s5pv210-aquila 2015-10-24 04:31:29 +09:00
s5pv210-goni.dts ARM: dts: Fix typo in regulator enable GPIO property in s5pv210-goni 2015-10-24 04:31:35 +09:00
s5pv210-pinctrl.dtsi
s5pv210-smdkc110.dts
s5pv210-smdkv210.dts ARM: dts: add 'dr_mode' property to hsotg devices for exynos boards 2015-01-24 13:24:06 +09:00
s5pv210-torbreck.dts
s5pv210.dtsi
sama5d2-pinfunc.h ARM: at91/dt: add sama5d2 pinmux 2015-09-23 16:26:05 +02:00
sama5d2.dtsi ARM: DT updates for v4.4 2015-11-10 15:06:26 -08:00
sama5d3.dtsi ARM: at91/dt: use syscon for PMC 2015-10-19 17:57:41 +02:00
sama5d3_can.dtsi ARM: at91/dt/trivial: correct file headers for SAMA5D3 SoC peripherals 2015-03-04 18:36:10 +01:00
sama5d3_emac.dtsi ARM: DT updates for v4.1 2015-04-22 09:09:46 -07:00
sama5d3_gmac.dtsi ARM: at91/dt/trivial: correct file headers for SAMA5D3 SoC peripherals 2015-03-04 18:36:10 +01:00
sama5d3_lcd.dtsi ARM: at91/dt: define the HLCDC node available on sama5d3 SoCs 2015-03-23 15:37:35 +01:00
sama5d3_mci2.dtsi ARM: at91/dt: add pullup on mmc2 data signals 2015-10-19 17:57:43 +02:00
sama5d3_tcb1.dtsi ARM: at91/dt: sama5d3: use slow clock where necessary 2015-08-07 11:58:45 +02:00
sama5d3_uart.dtsi ARM: at91/dt/trivial: correct file headers for SAMA5D3 SoC peripherals 2015-03-04 18:36:10 +01:00
sama5d3xcm.dtsi ARM: at91/dt: sama5d3xek: use stdout-path 2015-06-04 10:00:39 +02:00
sama5d3xdm.dtsi
sama5d3xmb.dtsi ARM: at91/dt: ov2640: add hsync/vsync-active property 2015-09-21 16:20:25 +02:00
sama5d4.dtsi ARM: at91/dt: sama5d4: add the macb1 node 2015-10-19 17:57:44 +02:00
sama5d31.dtsi
sama5d31ek.dts
sama5d33.dtsi
sama5d33ek.dts
sama5d34.dtsi
sama5d34ek.dts
sama5d35.dtsi
sama5d35ek.dts ARM: at91/dt: gpio-keys: address-cells and size-cells properties are not needed 2015-03-04 18:36:11 +01:00
sama5d36.dtsi
sama5d36ek.dts
samsung_k3pe0e000b.dtsi
sh73a0-kzm9g.dts ARM: shmobile: kzm9g dts: Use adxl345-specific compatible property 2015-09-14 10:16:37 +09:00
sh73a0.dtsi ARM: shmobile: sh73a0 dtsi: Add missing "gpio-ranges" to gpio node 2015-08-05 06:39:28 +09:00
skeleton.dtsi
skeleton64.dtsi
socfpga.dtsi SoCFPGA dts cleanup for v4.4 2015-10-22 10:08:46 -07:00
socfpga_arria5.dtsi
socfpga_arria5_socdk.dts ARM: dts: socfpga: use stdout-path for chosen node 2015-07-20 10:07:50 -05:00
socfpga_arria10.dtsi ARM: socfpga: dts: add clock fields for I2C, UART and USB on Arria10 2015-10-06 04:42:29 -05:00
socfpga_arria10_socdk.dtsi ARM: socfpga: dts: enable USB and I2C on Arria10 SoCDK 2015-10-06 04:42:34 -05:00
socfpga_arria10_socdk_sdmmc.dts ARM: socfpga: dts: rename socdk board file to socdk_sdmmc 2015-05-11 13:14:59 -05:00
socfpga_cyclone5.dtsi
socfpga_cyclone5_de0_sockit.dts ARM: dts: socfpga: Add support of Terasic DE0 Atlas board 2015-07-21 15:41:57 -05:00
socfpga_cyclone5_socdk.dts ARM: dts: socfpga: use stdout-path for chosen node 2015-07-20 10:07:50 -05:00
socfpga_cyclone5_sockit.dts ARM: DT updates for v4.3 2015-09-01 13:09:20 -07:00
socfpga_cyclone5_socrates.dts ARM: socfpga: socrates: add gpio-leds 2015-06-02 14:27:11 -05:00
socfpga_vt.dts
spear3xx.dtsi Update Viresh Kumar's email address 2015-07-17 16:39:53 -07:00
spear13xx.dtsi Update Viresh Kumar's email address 2015-07-17 16:39:53 -07:00
spear300-evb.dts Update Viresh Kumar's email address 2015-07-17 16:39:53 -07:00
spear300.dtsi Update Viresh Kumar's email address 2015-07-17 16:39:53 -07:00
spear310-evb.dts Update Viresh Kumar's email address 2015-07-17 16:39:53 -07:00
spear310.dtsi Update Viresh Kumar's email address 2015-07-17 16:39:53 -07:00
spear320-evb.dts Update Viresh Kumar's email address 2015-07-17 16:39:53 -07:00
spear320-hmi.dts
spear320.dtsi Update Viresh Kumar's email address 2015-07-17 16:39:53 -07:00
spear600-evb.dts
spear600.dtsi
spear1310-evb.dts Update Viresh Kumar's email address 2015-07-17 16:39:53 -07:00
spear1310.dtsi Update Viresh Kumar's email address 2015-07-17 16:39:53 -07:00
spear1340-evb.dts Update Viresh Kumar's email address 2015-07-17 16:39:53 -07:00
spear1340.dtsi Update Viresh Kumar's email address 2015-07-17 16:39:53 -07:00
st-pincfg.h
ste-ccu8540-pinctrl.dtsi
ste-ccu8540.dts ARM: ux500: define serial port aliases 2015-07-14 11:15:42 +02:00
ste-ccu9540.dts ARM: ux500: define serial port aliases 2015-07-14 11:15:42 +02:00
ste-dbx5x0.dtsi This is the bulk of pin control changes for the v4.3 development 2015-09-04 10:22:09 -07:00
ste-href-ab8500.dtsi
ste-href-ab8505.dtsi
ste-href-family-pinctrl.dtsi
ste-href-stuib.dtsi ARM: ux500: add the sensors to the STUIB board 2015-05-13 12:22:19 +02:00
ste-href-tvk1281618.dtsi ARM: ux500: assign the sensor trigger IRQs 2015-05-13 12:22:18 +02:00
ste-href.dtsi ARM: ux500: fix MMC/SD card regression 2015-07-14 11:15:57 +02:00
ste-hrefprev60-stuib.dts ARM: ux500: define serial port aliases 2015-07-14 11:15:42 +02:00
ste-hrefprev60-tvk.dts ARM: ux500: define serial port aliases 2015-07-14 11:15:42 +02:00
ste-hrefprev60.dtsi ARM: ux500: fix MMC/SD card regression 2015-07-14 11:15:57 +02:00
ste-hrefv60plus-stuib.dts ARM: ux500: define serial port aliases 2015-07-14 11:15:42 +02:00
ste-hrefv60plus-tvk.dts ARM: ux500: define serial port aliases 2015-07-14 11:15:42 +02:00
ste-hrefv60plus.dtsi ARM: ux500: modify initial levelshifter status 2015-10-14 17:14:43 +02:00
ste-nomadik-nhk15.dts ARM: nomadik: push accelerometer down to boards 2015-08-11 15:29:59 +02:00
ste-nomadik-pinctrl.dtsi
ste-nomadik-s8815.dts ARM: nomadik: push accelerometer down to boards 2015-08-11 15:29:59 +02:00
ste-nomadik-stn8815.dtsi This is the bulk of pin control changes for the v4.3 development 2015-09-04 10:22:09 -07:00
ste-snowball.dts ARM: dts: fix gpio-keys wakeup-source property 2015-10-22 09:53:57 -07:00
ste-u300.dts
stih41x-b2000.dtsi
stih41x-b2020.dtsi
stih41x-b2020x.dtsi
stih41x.dtsi
stih407-b2120.dts ARM: dts: Enable Ethernet on STi's B2120 boards 2015-10-15 13:45:56 +02:00
stih407-clock.dtsi ARM: STi: DT: Rename st_pll3200c32_407_c0_x into st_pll3200c32_cx_x 2015-07-22 11:41:33 +02:00
stih407-family.dtsi ARM: DT updates for v4.4 2015-11-10 15:06:26 -08:00
stih407-pinctrl.dtsi ARM: dts: Fix RGMII pinctrl timings 2015-10-15 13:45:46 +02:00
stih407.dtsi Highlights: 2015-10-06 16:25:00 +02:00
stih410-b2120.dts ARM: dts: Enable Ethernet on STi's B2120 boards 2015-10-15 13:45:56 +02:00
stih410-clock.dtsi ARM: STi: DT: Rename st_pll3200c32_407_c0_x into st_pll3200c32_cx_x 2015-07-22 11:41:33 +02:00
stih410-pinctrl.dtsi
stih410.dtsi Highlights: 2015-10-06 16:25:00 +02:00
stih415-b2000.dts
stih415-b2020.dts
stih415-clock.dtsi
stih415-pinctrl.dtsi
stih415.dtsi ARM: STi: DT: Move reset controller constants into common location 2015-08-03 13:13:44 +02:00
stih416-b2000.dts
stih416-b2020.dts
stih416-b2020e.dts ARM: STi: STiH416-b2020e: Enable PWM on the B2020 Rev-E 2015-05-13 10:41:41 +02:00
stih416-clock.dtsi
stih416-pinctrl.dtsi ARM: STi: STiH416: Add Pinctrl settings for PWM 2015-05-13 10:41:40 +02:00
stih416.dtsi ARM: STi: DT: Move reset controller constants into common location 2015-08-03 13:13:44 +02:00
stih418-b2199.dts ARM: dts: Enable Ethernet on STi's B2199 board 2015-10-15 13:45:59 +02:00
stih418-clock.dtsi ARM: STi: DT: Add support for stih418 A9 pll 2015-10-15 13:48:16 +02:00
stih418.dtsi ARM: DT: STi: STiH418: Fix mmc0 clock configuration 2015-09-30 11:18:01 +02:00
stihxxx-b2120.dtsi ARM: dts: Enable Ethernet on STi's B2120 boards 2015-10-15 13:45:56 +02:00
stm32f429-disco.dts ARM: dts: Use stdout-path in STM32F429 Discovery board 2015-07-23 07:07:12 +02:00
stm32f429.dtsi ARM: dts: stm32f429: Adopt STM32 RNG driver 2015-10-14 22:23:37 +08:00
stm32429i-eval.dts ARM: dts: Add STM32429i-EVAL board support 2015-07-23 06:59:50 +02:00
sun4i-a10-a1000.dts ARM: sun4i: Enable audio-codec on Mele A1000 2015-10-22 10:55:52 +02:00
sun4i-a10-ba10-tvbox.dts ARM: dts: sun4i: Enable otg controller on the ba10-tvbox 2015-07-06 13:36:08 +02:00
sun4i-a10-chuwi-v7-cw0825.dts ARM: dts: sun4i: Enable i2c1 and i2c2 on the Chuwi V7-CW0825 tablet 2015-09-13 14:21:17 +02:00
sun4i-a10-cubieboard.dts ARM: sun4i: Enable cubieboard audio codec 2015-10-22 10:57:19 +02:00
sun4i-a10-gemei-g9.dts ARM: dts: sun4i: gemei-g9: Add accelerometer (bma250) IRQ 2015-09-27 10:21:32 +02:00
sun4i-a10-hackberry.dts ARM: dts: sun4i: Add A10 SRAM and SRAM controller 2015-06-01 11:13:26 +02:00
sun4i-a10-hyundai-a7hd.dts ARM: sunxi: dt: Remove the FSF address 2015-05-10 10:22:23 +02:00
sun4i-a10-inet1.dts ARM: dts: sun4i: Add dts file for iNet-1 based tablets 2015-09-27 10:21:23 +02:00
sun4i-a10-inet9f-rev03.dts ARM: dts: sun4i: Add dts file inet9f-rev03 based tablets 2015-09-27 10:21:22 +02:00
sun4i-a10-inet97fv2.dts ARM: dts: sun4i: inet97fv2: Enable i2c1 and i2c2 controllers 2015-09-27 10:21:20 +02:00
sun4i-a10-itead-iteaduino-plus.dts ARM: dts: sun4i: Add Iteaduino Plus A10 2015-07-21 14:36:58 +02:00
sun4i-a10-jesurun-q5.dts ARM: dts: sun4i: Enable otg in host only mode on Jesurun Q5 2015-09-13 14:21:16 +02:00
sun4i-a10-marsboard.dts ARM: dts: sun4i: Enable audio codec on Marsboard A10. 2015-10-22 20:58:12 +02:00
sun4i-a10-mini-xplus.dts ARM: dts: sun4i: Enable otg controller on the mini-x 2015-07-06 13:36:09 +02:00
sun4i-a10-mk802.dts ARM: sunxi: dt: Remove the FSF address 2015-05-10 10:22:23 +02:00
sun4i-a10-mk802ii.dts ARM: sunxi: dt: Remove the FSF address 2015-05-10 10:22:23 +02:00
sun4i-a10-olinuxino-lime.dts dts: sunxi: add eeprom to A10 OLinuXino Lime board 2015-09-27 10:21:23 +02:00
sun4i-a10-pcduino.dts ARM: dts: sun4i: Enable USB DRC on pcDuino1/2 2015-10-11 19:06:22 +02:00
sun4i-a10-pcduino2.dts ARM: sun4i: dt: Add new LinkSprite pcDuino2 board 2015-10-11 18:50:55 +02:00
sun4i-a10-pov-protab2-ips9.dts ARM: dts: sun4i: Add dts file for the pov protab2-ips9 tablet 2015-10-22 10:58:12 +02:00
sun4i-a10.dtsi ARM: sun4i: Add sunxi codec device node 2015-10-21 22:43:27 +02:00
sun5i-a10s-auxtek-t003.dts ARM: dts: sun5i: Add support for the Auxtek-T003 HDMI stick 2015-09-27 10:21:18 +02:00
sun5i-a10s-auxtek-t004.dts ARM: sunxi: dt: Remove the FSF address 2015-05-10 10:22:23 +02:00
sun5i-a10s-mk802.dts ARM: sunxi: dt: Remove the FSF address 2015-05-10 10:22:23 +02:00
sun5i-a10s-olinuxino-micro.dts dts: sunxi: correct vendor prefix on OLinuXino a10s micro 2015-09-27 10:21:24 +02:00
sun5i-a10s-r7-tv-dongle.dts ARM: sunxi: dt: Remove the FSF address 2015-05-10 10:22:23 +02:00
sun5i-a10s-wobo-i5.dts ARM: dts: sun5i: Add dts file for the Wobo i5 top set box 2015-09-27 10:21:26 +02:00
sun5i-a10s.dtsi ARM: dts: sun5i: Add PWM controller node for A13 / A10s 2015-10-12 15:50:20 +02:00
sun5i-a13-hsg-h702.dts ARM: dts: sun5i: hsg-h702: Enable USB OTG controller 2015-07-31 18:59:51 +02:00
sun5i-a13-inet-98v-rev2.dts ARM: dts: sun5i: Add dts file for inet98v_rev2 based tablets 2015-09-27 10:21:21 +02:00
sun5i-a13-olinuxino-micro.dts ARM: sunxi: dt: Remove the FSF address 2015-05-10 10:22:23 +02:00
sun5i-a13-olinuxino.dts ARM: dts: sun5i: Enable USB DRC on A13 OLinuxIno 2015-07-31 18:57:48 +02:00
sun5i-a13-q8-tablet.dts ARM: dts: sun5i: Add dts file for q8 formfactor a13 based tablets 2015-09-27 10:21:30 +02:00
sun5i-a13-utoo-p66.dts ARM: sunxi: dt: Convert users to the PIO interrupts binding 2015-07-28 14:41:50 +02:00
sun5i-a13.dtsi ARM: dts: sun5i: Add PWM controller node for A13 / A10s 2015-10-12 15:50:20 +02:00
sun5i-q8-common.dtsi ARM: dts: sun5i: Add backlight node to sun5i-q8-common.dtsi 2015-10-12 15:51:54 +02:00
sun5i-r8-chip.dts ARM: sun5i: chip: Enable the audio codec 2015-10-22 10:55:53 +02:00
sun5i-r8.dtsi ARM: sun5i: Add R8 DTSI 2015-10-11 19:08:49 +02:00
sun5i.dtsi ARM: sun5i: Add the Audio codec DT node 2015-10-21 22:43:27 +02:00
sun6i-a31-app4-evb1.dts ARM: sunxi: dt: Remove the FSF address 2015-05-10 10:22:23 +02:00
sun6i-a31-colombus.dts ARM: dts: sun6i: Turn on gmac on Colombus 2015-10-13 20:41:49 +02:00
sun6i-a31-hummingbird.dts ARM: dts: sun6i: hummingbird: Enable AXP221 DC5LDO regulator as "vdd-cpus" 2015-10-13 20:46:36 +02:00
sun6i-a31-i7.dts ARM: sunxi: dt: Remove the FSF address 2015-05-10 10:22:23 +02:00
sun6i-a31-m9.dts ARM: dts: sun6i: Add a dts file for the Mele A1000G quad top set box 2015-06-02 23:39:46 +02:00
sun6i-a31-mele-a1000g-quad.dts ARM: dts: sun6i: Enable USB DRC on the Mele A1000G quad 2015-07-06 13:35:53 +02:00
sun6i-a31.dtsi ARM: dts: sun6i: Add simplefb node labels to reference at board level 2015-10-23 08:04:49 +02:00
sun6i-a31s-cs908.dts ARM: dts: sun6i: Enable otg controller on the cs908 2015-07-06 13:36:10 +02:00
sun6i-a31s-primo81.dts ARM: dts: sun6i: Add dts file for MSI Primo81 tablet 2015-10-23 08:05:17 +02:00
sun6i-a31s-sina31s-core.dtsi ARM: dts: sun6i: Add support for Sinlinx A31s SDK board 2015-10-19 20:04:08 +02:00
sun6i-a31s-sina31s.dts ARM: dts: sun6i: Add support for Sinlinx A31s SDK board 2015-10-19 20:04:08 +02:00
sun6i-a31s-sinovoip-bpi-m2.dts ARM: dts: sun6i: Add a dts file for the Sinovoip BPI-M2 board 2015-10-17 18:24:11 +02:00
sun6i-a31s-yones-toptech-bs1078-v2.dts ARM: dts: sun6i: Add support for Yones Toptech bs1078v2 tablets 2015-09-27 10:21:33 +02:00
sun6i-a31s.dtsi ARM: sunxi: dt: Remove the FSF address 2015-05-10 10:22:23 +02:00
sun7i-a20-bananapi.dts ARM: dts: sun7i: Enable USB DRC on Bananapi 2015-10-11 18:45:36 +02:00
sun7i-a20-bananapro.dts ARM: dts: sun7i: Add uart4 support for BananaPro, disable uart2 2015-06-01 11:08:29 +02:00
sun7i-a20-cubieboard2.dts ARM: sun7i: Enable cubieboard2 audio codec 2015-10-22 10:55:47 +02:00
sun7i-a20-cubietruck.dts ARM: sun7i: dt: enable audio codec on Cubietruck 2015-10-22 10:55:33 +02:00
sun7i-a20-hummingbird.dts ARM: sunxi: dt: Split the SPI pinctrl groups 2015-05-10 10:23:56 +02:00
sun7i-a20-i12-tvbox.dts ARM: sunxi: dt: Convert users to the PIO interrupts binding 2015-07-28 14:41:50 +02:00
sun7i-a20-m3.dts ARM: sunxi: dt: Remove the FSF address 2015-05-10 10:22:23 +02:00
sun7i-a20-mk808c.dts ARM: sun7i: dt: Add new MK808C device 2015-04-29 22:29:55 +02:00
sun7i-a20-olimex-som-evb.dts ARM: sun7i: dt: Add new Olimex A20 EVB device 2015-10-01 15:10:06 +02:00
sun7i-a20-olinuxino-lime.dts dts: sunxi: add eeprom to A20 OLinuXino Lime board 2015-09-27 10:21:24 +02:00
sun7i-a20-olinuxino-lime2.dts dts: sunxi: add eeprom to A20 OLinuXino Lime2 board 2015-09-27 10:21:25 +02:00
sun7i-a20-olinuxino-micro.dts dts: sunxi: add eeprom to A20 OLinuXino micro board 2015-09-27 10:21:25 +02:00
sun7i-a20-orangepi-mini.dts ARM: dts: sun7i: Enable USB DRC on orangepi-mini 2015-09-29 09:54:55 +02:00
sun7i-a20-orangepi.dts ARM: dts: sun7i: Enable USB DRC on the Orange pi 2015-09-29 09:55:00 +02:00
sun7i-a20-pcduino3-nano.dts ARM: dts: sun7i: Enable USB DRC on pcDuino v3 Nano 2015-10-19 20:05:24 +02:00
sun7i-a20-pcduino3.dts ARM: dts: sun7i: Enable USB DRC on pcDuino 3 2015-09-27 10:21:16 +02:00
sun7i-a20-wexler-tab7200.dts ARM: dts: sun7i: Enable USB DRC on Wexler TAB7200 2015-09-29 09:55:09 +02:00
sun7i-a20-wits-pro-a20-dkt.dts ARM: dts: sun7i: Add dts file for Wits Pro A20 DKT 2015-09-29 10:03:38 +02:00
sun7i-a20.dtsi ARM: sun7i: Add sunxi codec device node 2015-10-21 22:43:28 +02:00
sun8i-a23-a33.dtsi ARM: dts: sunxi: Fix interrupt-cells for [r]pio on A23/A31/A33/A80 2015-10-17 18:21:38 +02:00
sun8i-a23-evb.dts ARM: sun8i: Introduce A23 Evaluation Board Support 2015-06-01 11:08:24 +02:00
sun8i-a23-gt90h-v4.dts ARM: dts: sun8i: Add support for qt90h-v4 tablets 2015-09-27 10:21:16 +02:00
sun8i-a23-ippo-q8h-v1.2.dts ARM: dts: sun8i: Make ippo-q8h-v*.dts a symlink to q8-tablet.dts 2015-10-13 20:40:57 +02:00
sun8i-a23-ippo-q8h-v5.dts ARM: dts: sun8i: Make ippo-q8h-v*.dts a symlink to q8-tablet.dts 2015-10-13 20:40:57 +02:00
sun8i-a23-q8-tablet.dts ARM: dts: sun8i: Add sun8i-a23-q8-tablet.dts file 2015-10-13 20:40:17 +02:00
sun8i-a23.dtsi ARM: sun8i: A23: Add missing msgbox gate 2015-09-27 10:21:31 +02:00
sun8i-a33-et-q8-v1.6.dts ARM: dts: sun8i: Make et-q8-v1.6.dts a symlink to q8-tablet.dts 2015-10-13 20:41:28 +02:00
sun8i-a33-ga10h-v1.1.dts ARM: dts: sun8i: Enable USB host on GA10H-A33 tablets 2015-07-06 13:36:01 +02:00
sun8i-a33-ippo-q8h-v1.2.dts ARM: dts: sun8i: Make ippo-q8h-v1.2.dts a symlink to q8-tablet.dts 2015-09-28 10:33:56 +02:00
sun8i-a33-q8-tablet.dts ARM: dts: sun8i: Add sun8i-a33-q8-tablet.dts file 2015-09-28 10:33:44 +02:00
sun8i-a33-sinlinx-sina33.dts ARM: dts: sun8i: sinlinx-sina33: Enable Reduced Serial Bus controller 2015-10-07 10:56:32 +01:00
sun8i-a33.dtsi ARM: dts: sun8i-a33: Add security system crypto engine clock and device nodes 2015-09-27 10:21:32 +02:00
sun8i-q8-common.dtsi ARM: dts: sun8i: q8-common: Enable RSB controller for A23/A33 Q8 tablets 2015-10-07 10:56:16 +01:00
sun9i-a80-cubieboard4.dts ARM: dts: add cubietech cubieboard4 2015-04-27 08:20:27 +02:00
sun9i-a80-optimus.dts ARM: sunxi: dt: Remove the FSF address 2015-05-10 10:22:23 +02:00
sun9i-a80.dtsi ARM: dts: sunxi: Fix interrupt-cells for [r]pio on A23/A31/A33/A80 2015-10-17 18:21:38 +02:00
sunxi-common-regulators.dtsi ARM: dts: sunxi: Add regulator-boot-on to usb host port regulator nodes 2015-07-06 13:36:06 +02:00
sunxi-q8-common.dtsi ARM: dts: sunxi: Enable PWM controller on Q8 format tablets 2015-10-12 15:51:32 +02:00
tegra20-colibri-512.dtsi
tegra20-harmony.dts
tegra20-iris-512.dts
tegra20-medcom-wide.dts
tegra20-paz00.dts
tegra20-plutux.dts
tegra20-seaboard.dts ARM: tegra: Add missing HDMI +5V regulator 2015-05-04 14:01:55 +02:00
tegra20-tamonten.dtsi
tegra20-tec.dts
tegra20-trimslice.dts
tegra20-ventana.dts
tegra20-whistler.dts
tegra20.dtsi ARM: DT updates for v4.4 2015-11-10 15:06:26 -08:00
tegra30-apalis-eval.dts ARM: tegra: apalis-eval: Fix power/wakeup key 2015-09-15 11:22:38 +02:00
tegra30-apalis.dtsi ARM: tegra: apalis: Properly align pin names 2015-09-15 11:22:36 +02:00
tegra30-beaver.dts ARM: tegra: Use generated pinmux for Beaver board 2015-03-24 10:51:14 +01:00
tegra30-cardhu-a02.dts
tegra30-cardhu-a04.dts
tegra30-cardhu.dtsi ARM: tegra: Cardhu device-tree comment spelling fix 2015-05-05 13:42:56 +02:00
tegra30-colibri-eval-v3.dts ARM: tegra: colibri-eval: Fix power/wakeup key 2015-09-15 11:22:46 +02:00
tegra30-colibri.dtsi ARM: tegra: colibri: Properly align pin names 2015-09-15 11:22:44 +02:00
tegra30.dtsi ARM: DT updates for v4.4 2015-11-10 15:06:26 -08:00
tegra114-dalmore.dts
tegra114-roth.dts
tegra114-tn7.dts
tegra114.dtsi ARM: tegra: Comment out gpio-ranges properties 2015-10-15 17:58:43 +02:00
tegra124-jetson-tk1-emc.dtsi ARM: tegra: Add EMC timings to Jetson TK1 device tree 2015-03-30 11:43:38 +02:00
tegra124-jetson-tk1.dts ARM: tegra: jetson-tk1: Add GK20A GPU DT node 2015-08-21 18:44:27 +02:00
tegra124-nyan-big-emc.dtsi ARM: tegra: Add EMC timings to Nyan Big device tree 2015-03-30 11:43:39 +02:00
tegra124-nyan-big.dts ARM: tegra: Add EMC timings to Nyan Big device tree 2015-03-30 11:43:39 +02:00
tegra124-nyan-blaze-emc.dtsi ARM: tegra: Add EMC timings to Nyan Blaze device tree 2015-03-30 11:43:39 +02:00
tegra124-nyan-blaze.dts ARM: tegra: Add EMC timings to Nyan Blaze device tree 2015-03-30 11:43:39 +02:00
tegra124-nyan.dtsi ARM: tegra: Enable CPUFreq support for Tegra124 Chromebooks 2015-09-15 11:22:04 +02:00
tegra124-venice2.dts ARM: tegra: venice2: Add GK20A GPU DT node 2015-08-21 18:44:26 +02:00
tegra124.dtsi ARM: DT updates for v4.4 2015-11-10 15:06:26 -08:00
tny_a9g20.dts
tny_a9260.dts
tny_a9260_common.dtsi
tny_a9263.dts
tps6507x.dtsi
tps65217.dtsi
tps65910.dtsi
twl4030.dtsi Revert "ARM: dts: twl4030: Add iio properties for bci subnode" 2015-11-06 21:17:53 +01:00
twl4030_omap3.dtsi
twl6030.dtsi
twl6030_omap4.dtsi
uniphier-ph1-ld4-ref.dts ARM: dts: uniphier: use stdout-path instead of console 2015-10-23 22:10:42 +02:00
uniphier-ph1-ld4.dtsi ARM: dts: uniphier: add system-bus-controller nodes 2015-10-31 01:58:06 +00:00
uniphier-ph1-ld6b-ref.dts ARM: DT updates for v4.4 2015-11-10 15:06:26 -08:00
uniphier-ph1-ld6b.dtsi ARM: dts: uniphier: add ProXstream2 and PH1-LD6b SoC/board support 2015-08-11 15:09:32 +02:00
uniphier-ph1-pro4-ref.dts ARM: dts: uniphier: use stdout-path instead of console 2015-10-23 22:10:42 +02:00
uniphier-ph1-pro4.dtsi ARM: dts: uniphier: add system-bus-controller nodes 2015-10-31 01:58:06 +00:00
uniphier-ph1-pro5.dtsi ARM: dts: uniphier: add system-bus-controller nodes 2015-10-31 01:58:06 +00:00
uniphier-ph1-sld3-ref.dts ARM: dts: uniphier: use stdout-path instead of console 2015-10-23 22:10:42 +02:00
uniphier-ph1-sld3.dtsi ARM: dts: uniphier: add system-bus-controller nodes 2015-10-31 01:58:06 +00:00
uniphier-ph1-sld8-ref.dts ARM: dts: uniphier: use stdout-path instead of console 2015-10-23 22:10:42 +02:00
uniphier-ph1-sld8.dtsi ARM: dts: uniphier: add system-bus-controller nodes 2015-10-31 01:58:06 +00:00
uniphier-pinctrl.dtsi ARM: dts: uniphier: add I2C controller device nodes 2015-08-11 15:09:21 +02:00
uniphier-proxstream2-gentil.dts ARM: dts: uniphier: add I2C aliases for ProXstream2 boards 2015-10-26 10:34:40 +09:00
uniphier-proxstream2-vodka.dts ARM: dts: uniphier: add I2C aliases for ProXstream2 boards 2015-10-26 10:34:40 +09:00
uniphier-proxstream2.dtsi ARM: dts: uniphier: add system-bus-controller nodes 2015-10-31 01:58:06 +00:00
uniphier-ref-daughter.dtsi ARM: dts: UniPhier: add reference daughter board 2015-08-11 15:20:56 +02:00
uniphier-support-card.dtsi ARM: dts: UniPhier: add support for UniPhier SoCs and boards 2015-05-12 16:56:27 +02:00
usb_a9g20-dab-mmx.dtsi
usb_a9g20.dts
usb_a9g20_common.dtsi
usb_a9g20_lpw.dts
usb_a9260.dts
usb_a9260_common.dtsi
usb_a9263.dts
versatile-ab.dts dts: versatile: Add sysregs node 2015-01-29 14:02:16 +01:00
versatile-pb.dts ARM: dts: versatile: add PCI controller binding 2015-01-29 08:33:03 -06:00
vexpress-v2m-rs1.dtsi ARM: dts: vexpress: Use assigned-clock-parents for sp810 2015-08-18 13:17:27 -07:00
vexpress-v2m.dtsi ARM: dts: vexpress: Use assigned-clock-parents for sp810 2015-08-18 13:17:27 -07:00
vexpress-v2p-ca5s.dts
vexpress-v2p-ca9.dts ARM: vexpress/ca9: Add interrupt-affinity to the PMU node 2015-05-12 16:39:43 +02:00
vexpress-v2p-ca15-tc1.dts
vexpress-v2p-ca15_a7.dts arm: dts: vexpress: add missing CCI PMU device node to TC2 2015-07-08 14:44:55 -07:00
vf-colibri-eval-v3.dtsi ARM: dts: vf-colibri: define stdout-path property 2015-08-11 23:15:22 +08:00
vf-colibri.dtsi ARM: dts: vf-colibri: enable NAND flash controller 2015-10-19 22:45:24 +08:00
vf500-colibri-eval-v3.dts ARM: dts: vf500-colibri: Add device tree node for touchscreen support 2015-10-19 22:45:19 +08:00
vf500-colibri.dtsi ARM: dts: vf500-colibri: Add device tree node for touchscreen support 2015-10-19 22:45:19 +08:00
vf500.dtsi ARM: dts: vf610: add Miscellaneous System Control Module (MSCM) 2015-03-30 16:43:48 +08:00
vf610-colibri-eval-v3.dts
vf610-colibri.dtsi
vf610-cosmic.dts ARM: dts: vf610: Nomenclature fixup for PTC12 pin used in RMII mode. 2015-06-03 15:04:00 +08:00
vf610-pinfunc.h ARM: dts: vf610: Nomenclature fixup for PTC12 pin used in RMII mode. 2015-06-03 15:04:00 +08:00
vf610-twr.dts ARM: dts: vf610twr: add NAND flash controller peripherial 2015-10-19 22:45:24 +08:00
vf610.dtsi
vf610m4-colibri.dts ARM: dts: add support for Vybrid running on Cortex-M4 2015-05-20 23:08:11 +02:00
vf610m4.dtsi ARM: dts: add support for Vybrid running on Cortex-M4 2015-05-20 23:08:11 +02:00
vfxxx.dtsi ARM: dts: vf610twr: add NAND flash controller peripherial 2015-10-19 22:45:24 +08:00
vt8500-bv07.dts
vt8500.dtsi
wm8505-ref.dts
wm8505.dtsi
wm8650-mid.dts
wm8650.dtsi
wm8750-apc8750.dts
wm8750.dtsi ARM: dts: WM8750: fix cpu compatible value 2015-10-23 21:59:38 +02:00
wm8850-w70v2.dts
wm8850.dtsi
xenvm-4.2.dts
zx296702-ad1.dts ARM: dts: zx: add an initial zx296702 dts and doc 2015-06-11 16:18:30 -07:00
zx296702.dtsi ARM: dts: zx: add an initial zx296702 dts and doc 2015-06-11 16:18:30 -07:00
zynq-7000.dtsi ARM: zynq: dt: Updated devicetree for Zynq 7000 platform. 2015-10-17 21:57:16 -07:00
zynq-parallella.dts ARM: dts: zynq: Fix stdout-path and bootargs 2015-05-28 08:44:56 +02:00
zynq-zc702.dts ARM: zynq: DT: Add zc702 pushbuttons to DT as gpio-keys 2015-07-31 10:50:06 +02:00
zynq-zc706.dts ARM: dts: zynq: Fix stdout-path and bootargs 2015-05-28 08:44:56 +02:00
zynq-zed.dts ARM: dts: zynq: Fix stdout-path and bootargs 2015-05-28 08:44:56 +02:00
zynq-zybo.dts ARM: dts: zynq: Fix stdout-path and bootargs 2015-05-28 08:44:56 +02:00