645 lines
16 KiB
C
645 lines
16 KiB
C
// SPDX-License-Identifier: (GPL-2.0 OR BSD-3-Clause)
|
|
//
|
|
// Copyright (c) 2018 Mellanox Technologies. All rights reserved.
|
|
// Copyright (c) 2018 Vadim Pasternak <vadimp@mellanox.com>
|
|
|
|
#include <linux/bitops.h>
|
|
#include <linux/device.h>
|
|
#include <linux/hwmon.h>
|
|
#include <linux/module.h>
|
|
#include <linux/platform_data/mlxreg.h>
|
|
#include <linux/platform_device.h>
|
|
#include <linux/regmap.h>
|
|
#include <linux/thermal.h>
|
|
|
|
#define MLXREG_FAN_MAX_TACHO 14
|
|
#define MLXREG_FAN_MAX_PWM 4
|
|
#define MLXREG_FAN_PWM_NOT_CONNECTED 0xff
|
|
#define MLXREG_FAN_MAX_STATE 10
|
|
#define MLXREG_FAN_MIN_DUTY 51 /* 20% */
|
|
#define MLXREG_FAN_MAX_DUTY 255 /* 100% */
|
|
/*
|
|
* Minimum and maximum FAN allowed speed in percent: from 20% to 100%. Values
|
|
* MLXREG_FAN_MAX_STATE + x, where x is between 2 and 10 are used for
|
|
* setting FAN speed dynamic minimum. For example, if value is set to 14 (40%)
|
|
* cooling levels vector will be set to 4, 4, 4, 4, 4, 5, 6, 7, 8, 9, 10 to
|
|
* introduce PWM speed in percent: 40, 40, 40, 40, 40, 50, 60. 70, 80, 90, 100.
|
|
*/
|
|
#define MLXREG_FAN_SPEED_MIN (MLXREG_FAN_MAX_STATE + 2)
|
|
#define MLXREG_FAN_SPEED_MAX (MLXREG_FAN_MAX_STATE * 2)
|
|
#define MLXREG_FAN_SPEED_MIN_LEVEL 2 /* 20 percent */
|
|
#define MLXREG_FAN_TACHO_SAMPLES_PER_PULSE_DEF 44
|
|
#define MLXREG_FAN_TACHO_DIV_MIN 283
|
|
#define MLXREG_FAN_TACHO_DIV_DEF (MLXREG_FAN_TACHO_DIV_MIN * 4)
|
|
#define MLXREG_FAN_TACHO_DIV_SCALE_MAX 64
|
|
/*
|
|
* FAN datasheet defines the formula for RPM calculations as RPM = 15/t-high.
|
|
* The logic in a programmable device measures the time t-high by sampling the
|
|
* tachometer every t-sample (with the default value 11.32 uS) and increment
|
|
* a counter (N) as long as the pulse has not change:
|
|
* RPM = 15 / (t-sample * (K + Regval)), where:
|
|
* Regval: is the value read from the programmable device register;
|
|
* - 0xff - represents tachometer fault;
|
|
* - 0xfe - represents tachometer minimum value , which is 4444 RPM;
|
|
* - 0x00 - represents tachometer maximum value , which is 300000 RPM;
|
|
* K: is 44 and it represents the minimum allowed samples per pulse;
|
|
* N: is equal K + Regval;
|
|
* In order to calculate RPM from the register value the following formula is
|
|
* used: RPM = 15 / ((Regval + K) * 11.32) * 10^(-6)), which in the
|
|
* default case is modified to:
|
|
* RPM = 15000000 * 100 / ((Regval + 44) * 1132);
|
|
* - for Regval 0x00, RPM will be 15000000 * 100 / (44 * 1132) = 30115;
|
|
* - for Regval 0xfe, RPM will be 15000000 * 100 / ((254 + 44) * 1132) = 4446;
|
|
* In common case the formula is modified to:
|
|
* RPM = 15000000 * 100 / ((Regval + samples) * divider).
|
|
*/
|
|
#define MLXREG_FAN_GET_RPM(rval, d, s) (DIV_ROUND_CLOSEST(15000000 * 100, \
|
|
((rval) + (s)) * (d)))
|
|
#define MLXREG_FAN_GET_FAULT(val, mask) ((val) == (mask))
|
|
#define MLXREG_FAN_PWM_DUTY2STATE(duty) (DIV_ROUND_CLOSEST((duty) * \
|
|
MLXREG_FAN_MAX_STATE, \
|
|
MLXREG_FAN_MAX_DUTY))
|
|
#define MLXREG_FAN_PWM_STATE2DUTY(stat) (DIV_ROUND_CLOSEST((stat) * \
|
|
MLXREG_FAN_MAX_DUTY, \
|
|
MLXREG_FAN_MAX_STATE))
|
|
|
|
struct mlxreg_fan;
|
|
|
|
/*
|
|
* struct mlxreg_fan_tacho - tachometer data (internal use):
|
|
*
|
|
* @connected: indicates if tachometer is connected;
|
|
* @reg: register offset;
|
|
* @mask: fault mask;
|
|
* @prsnt: present register offset;
|
|
*/
|
|
struct mlxreg_fan_tacho {
|
|
bool connected;
|
|
u32 reg;
|
|
u32 mask;
|
|
u32 prsnt;
|
|
};
|
|
|
|
/*
|
|
* struct mlxreg_fan_pwm - PWM data (internal use):
|
|
*
|
|
* @fan: private data;
|
|
* @connected: indicates if PWM is connected;
|
|
* @reg: register offset;
|
|
* @cooling: cooling device levels;
|
|
* @cdev: cooling device;
|
|
*/
|
|
struct mlxreg_fan_pwm {
|
|
struct mlxreg_fan *fan;
|
|
bool connected;
|
|
u32 reg;
|
|
u8 cooling_levels[MLXREG_FAN_MAX_STATE + 1];
|
|
struct thermal_cooling_device *cdev;
|
|
};
|
|
|
|
/*
|
|
* struct mlxreg_fan - private data (internal use):
|
|
*
|
|
* @dev: basic device;
|
|
* @regmap: register map of parent device;
|
|
* @tacho: tachometer data;
|
|
* @pwm: PWM data;
|
|
* @tachos_per_drwr - number of tachometers per drawer;
|
|
* @samples: minimum allowed samples per pulse;
|
|
* @divider: divider value for tachometer RPM calculation;
|
|
*/
|
|
struct mlxreg_fan {
|
|
struct device *dev;
|
|
void *regmap;
|
|
struct mlxreg_core_platform_data *pdata;
|
|
struct mlxreg_fan_tacho tacho[MLXREG_FAN_MAX_TACHO];
|
|
struct mlxreg_fan_pwm pwm[MLXREG_FAN_MAX_PWM];
|
|
int tachos_per_drwr;
|
|
int samples;
|
|
int divider;
|
|
};
|
|
|
|
static int
|
|
mlxreg_fan_read(struct device *dev, enum hwmon_sensor_types type, u32 attr,
|
|
int channel, long *val)
|
|
{
|
|
struct mlxreg_fan *fan = dev_get_drvdata(dev);
|
|
struct mlxreg_fan_tacho *tacho;
|
|
struct mlxreg_fan_pwm *pwm;
|
|
u32 regval;
|
|
int err;
|
|
|
|
switch (type) {
|
|
case hwmon_fan:
|
|
tacho = &fan->tacho[channel];
|
|
switch (attr) {
|
|
case hwmon_fan_input:
|
|
/*
|
|
* Check FAN presence: FAN related bit in presence register is one,
|
|
* if FAN is physically connected, zero - otherwise.
|
|
*/
|
|
if (tacho->prsnt && fan->tachos_per_drwr) {
|
|
err = regmap_read(fan->regmap, tacho->prsnt, ®val);
|
|
if (err)
|
|
return err;
|
|
|
|
/*
|
|
* Map channel to presence bit - drawer can be equipped with
|
|
* one or few FANs, while presence is indicated per drawer.
|
|
*/
|
|
if (BIT(channel / fan->tachos_per_drwr) & regval) {
|
|
/* FAN is not connected - return zero for FAN speed. */
|
|
*val = 0;
|
|
return 0;
|
|
}
|
|
}
|
|
|
|
err = regmap_read(fan->regmap, tacho->reg, ®val);
|
|
if (err)
|
|
return err;
|
|
|
|
*val = MLXREG_FAN_GET_RPM(regval, fan->divider,
|
|
fan->samples);
|
|
break;
|
|
|
|
case hwmon_fan_fault:
|
|
err = regmap_read(fan->regmap, tacho->reg, ®val);
|
|
if (err)
|
|
return err;
|
|
|
|
*val = MLXREG_FAN_GET_FAULT(regval, tacho->mask);
|
|
break;
|
|
|
|
default:
|
|
return -EOPNOTSUPP;
|
|
}
|
|
break;
|
|
|
|
case hwmon_pwm:
|
|
pwm = &fan->pwm[channel];
|
|
switch (attr) {
|
|
case hwmon_pwm_input:
|
|
err = regmap_read(fan->regmap, pwm->reg, ®val);
|
|
if (err)
|
|
return err;
|
|
|
|
*val = regval;
|
|
break;
|
|
|
|
default:
|
|
return -EOPNOTSUPP;
|
|
}
|
|
break;
|
|
|
|
default:
|
|
return -EOPNOTSUPP;
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int
|
|
mlxreg_fan_write(struct device *dev, enum hwmon_sensor_types type, u32 attr,
|
|
int channel, long val)
|
|
{
|
|
struct mlxreg_fan *fan = dev_get_drvdata(dev);
|
|
struct mlxreg_fan_pwm *pwm;
|
|
|
|
switch (type) {
|
|
case hwmon_pwm:
|
|
switch (attr) {
|
|
case hwmon_pwm_input:
|
|
if (val < MLXREG_FAN_MIN_DUTY ||
|
|
val > MLXREG_FAN_MAX_DUTY)
|
|
return -EINVAL;
|
|
pwm = &fan->pwm[channel];
|
|
return regmap_write(fan->regmap, pwm->reg, val);
|
|
default:
|
|
return -EOPNOTSUPP;
|
|
}
|
|
break;
|
|
|
|
default:
|
|
return -EOPNOTSUPP;
|
|
}
|
|
|
|
return -EOPNOTSUPP;
|
|
}
|
|
|
|
static umode_t
|
|
mlxreg_fan_is_visible(const void *data, enum hwmon_sensor_types type, u32 attr,
|
|
int channel)
|
|
{
|
|
switch (type) {
|
|
case hwmon_fan:
|
|
if (!(((struct mlxreg_fan *)data)->tacho[channel].connected))
|
|
return 0;
|
|
|
|
switch (attr) {
|
|
case hwmon_fan_input:
|
|
case hwmon_fan_fault:
|
|
return 0444;
|
|
default:
|
|
break;
|
|
}
|
|
break;
|
|
|
|
case hwmon_pwm:
|
|
if (!(((struct mlxreg_fan *)data)->pwm[channel].connected))
|
|
return 0;
|
|
|
|
switch (attr) {
|
|
case hwmon_pwm_input:
|
|
return 0644;
|
|
default:
|
|
break;
|
|
}
|
|
break;
|
|
|
|
default:
|
|
break;
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
static char *mlxreg_fan_name[] = {
|
|
"mlxreg_fan",
|
|
"mlxreg_fan1",
|
|
"mlxreg_fan2",
|
|
"mlxreg_fan3",
|
|
};
|
|
|
|
static const struct hwmon_channel_info *mlxreg_fan_hwmon_info[] = {
|
|
HWMON_CHANNEL_INFO(fan,
|
|
HWMON_F_INPUT | HWMON_F_FAULT,
|
|
HWMON_F_INPUT | HWMON_F_FAULT,
|
|
HWMON_F_INPUT | HWMON_F_FAULT,
|
|
HWMON_F_INPUT | HWMON_F_FAULT,
|
|
HWMON_F_INPUT | HWMON_F_FAULT,
|
|
HWMON_F_INPUT | HWMON_F_FAULT,
|
|
HWMON_F_INPUT | HWMON_F_FAULT,
|
|
HWMON_F_INPUT | HWMON_F_FAULT,
|
|
HWMON_F_INPUT | HWMON_F_FAULT,
|
|
HWMON_F_INPUT | HWMON_F_FAULT,
|
|
HWMON_F_INPUT | HWMON_F_FAULT,
|
|
HWMON_F_INPUT | HWMON_F_FAULT,
|
|
HWMON_F_INPUT | HWMON_F_FAULT,
|
|
HWMON_F_INPUT | HWMON_F_FAULT),
|
|
HWMON_CHANNEL_INFO(pwm,
|
|
HWMON_PWM_INPUT,
|
|
HWMON_PWM_INPUT,
|
|
HWMON_PWM_INPUT,
|
|
HWMON_PWM_INPUT),
|
|
NULL
|
|
};
|
|
|
|
static const struct hwmon_ops mlxreg_fan_hwmon_hwmon_ops = {
|
|
.is_visible = mlxreg_fan_is_visible,
|
|
.read = mlxreg_fan_read,
|
|
.write = mlxreg_fan_write,
|
|
};
|
|
|
|
static const struct hwmon_chip_info mlxreg_fan_hwmon_chip_info = {
|
|
.ops = &mlxreg_fan_hwmon_hwmon_ops,
|
|
.info = mlxreg_fan_hwmon_info,
|
|
};
|
|
|
|
static int mlxreg_fan_get_max_state(struct thermal_cooling_device *cdev,
|
|
unsigned long *state)
|
|
{
|
|
*state = MLXREG_FAN_MAX_STATE;
|
|
return 0;
|
|
}
|
|
|
|
static int mlxreg_fan_get_cur_state(struct thermal_cooling_device *cdev,
|
|
unsigned long *state)
|
|
|
|
{
|
|
struct mlxreg_fan_pwm *pwm = cdev->devdata;
|
|
struct mlxreg_fan *fan = pwm->fan;
|
|
u32 regval;
|
|
int err;
|
|
|
|
err = regmap_read(fan->regmap, pwm->reg, ®val);
|
|
if (err) {
|
|
dev_err(fan->dev, "Failed to query PWM duty\n");
|
|
return err;
|
|
}
|
|
|
|
*state = MLXREG_FAN_PWM_DUTY2STATE(regval);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int mlxreg_fan_set_cur_state(struct thermal_cooling_device *cdev,
|
|
unsigned long state)
|
|
|
|
{
|
|
struct mlxreg_fan_pwm *pwm = cdev->devdata;
|
|
struct mlxreg_fan *fan = pwm->fan;
|
|
unsigned long cur_state;
|
|
int i, config = 0;
|
|
u32 regval;
|
|
int err;
|
|
|
|
/*
|
|
* Verify if this request is for changing allowed FAN dynamical
|
|
* minimum. If it is - update cooling levels accordingly and update
|
|
* state, if current state is below the newly requested minimum state.
|
|
* For example, if current state is 5, and minimal state is to be
|
|
* changed from 4 to 6, fan->cooling_levels[0 to 5] will be changed all
|
|
* from 4 to 6. And state 5 (fan->cooling_levels[4]) should be
|
|
* overwritten.
|
|
*/
|
|
if (state >= MLXREG_FAN_SPEED_MIN && state <= MLXREG_FAN_SPEED_MAX) {
|
|
/*
|
|
* This is configuration change, which is only supported through sysfs.
|
|
* For configuration non-zero value is to be returned to avoid thermal
|
|
* statistics update.
|
|
*/
|
|
config = 1;
|
|
state -= MLXREG_FAN_MAX_STATE;
|
|
for (i = 0; i < state; i++)
|
|
pwm->cooling_levels[i] = state;
|
|
for (i = state; i <= MLXREG_FAN_MAX_STATE; i++)
|
|
pwm->cooling_levels[i] = i;
|
|
|
|
err = regmap_read(fan->regmap, pwm->reg, ®val);
|
|
if (err) {
|
|
dev_err(fan->dev, "Failed to query PWM duty\n");
|
|
return err;
|
|
}
|
|
|
|
cur_state = MLXREG_FAN_PWM_DUTY2STATE(regval);
|
|
if (state < cur_state)
|
|
return config;
|
|
|
|
state = cur_state;
|
|
}
|
|
|
|
if (state > MLXREG_FAN_MAX_STATE)
|
|
return -EINVAL;
|
|
|
|
/* Normalize the state to the valid speed range. */
|
|
state = pwm->cooling_levels[state];
|
|
err = regmap_write(fan->regmap, pwm->reg,
|
|
MLXREG_FAN_PWM_STATE2DUTY(state));
|
|
if (err) {
|
|
dev_err(fan->dev, "Failed to write PWM duty\n");
|
|
return err;
|
|
}
|
|
return config;
|
|
}
|
|
|
|
static const struct thermal_cooling_device_ops mlxreg_fan_cooling_ops = {
|
|
.get_max_state = mlxreg_fan_get_max_state,
|
|
.get_cur_state = mlxreg_fan_get_cur_state,
|
|
.set_cur_state = mlxreg_fan_set_cur_state,
|
|
};
|
|
|
|
static int mlxreg_fan_connect_verify(struct mlxreg_fan *fan,
|
|
struct mlxreg_core_data *data)
|
|
{
|
|
u32 regval;
|
|
int err;
|
|
|
|
err = regmap_read(fan->regmap, data->capability, ®val);
|
|
if (err) {
|
|
dev_err(fan->dev, "Failed to query capability register 0x%08x\n",
|
|
data->capability);
|
|
return err;
|
|
}
|
|
|
|
return !!(regval & data->bit);
|
|
}
|
|
|
|
static int mlxreg_pwm_connect_verify(struct mlxreg_fan *fan,
|
|
struct mlxreg_core_data *data)
|
|
{
|
|
u32 regval;
|
|
int err;
|
|
|
|
err = regmap_read(fan->regmap, data->reg, ®val);
|
|
if (err) {
|
|
dev_err(fan->dev, "Failed to query pwm register 0x%08x\n",
|
|
data->reg);
|
|
return err;
|
|
}
|
|
|
|
return regval != MLXREG_FAN_PWM_NOT_CONNECTED;
|
|
}
|
|
|
|
static int mlxreg_fan_speed_divider_get(struct mlxreg_fan *fan,
|
|
struct mlxreg_core_data *data)
|
|
{
|
|
u32 regval;
|
|
int err;
|
|
|
|
err = regmap_read(fan->regmap, data->capability, ®val);
|
|
if (err) {
|
|
dev_err(fan->dev, "Failed to query capability register 0x%08x\n",
|
|
data->capability);
|
|
return err;
|
|
}
|
|
|
|
/*
|
|
* Set divider value according to the capability register, in case it
|
|
* contains valid value. Otherwise use default value. The purpose of
|
|
* this validation is to protect against the old hardware, in which
|
|
* this register can return zero.
|
|
*/
|
|
if (regval > 0 && regval <= MLXREG_FAN_TACHO_DIV_SCALE_MAX)
|
|
fan->divider = regval * MLXREG_FAN_TACHO_DIV_MIN;
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int mlxreg_fan_config(struct mlxreg_fan *fan,
|
|
struct mlxreg_core_platform_data *pdata)
|
|
{
|
|
int tacho_num = 0, tacho_avail = 0, pwm_num = 0, i;
|
|
struct mlxreg_core_data *data = pdata->data;
|
|
bool configured = false;
|
|
int err;
|
|
|
|
fan->samples = MLXREG_FAN_TACHO_SAMPLES_PER_PULSE_DEF;
|
|
fan->divider = MLXREG_FAN_TACHO_DIV_DEF;
|
|
for (i = 0; i < pdata->counter; i++, data++) {
|
|
if (strnstr(data->label, "tacho", sizeof(data->label))) {
|
|
if (tacho_num == MLXREG_FAN_MAX_TACHO) {
|
|
dev_err(fan->dev, "too many tacho entries: %s\n",
|
|
data->label);
|
|
return -EINVAL;
|
|
}
|
|
|
|
if (data->capability) {
|
|
err = mlxreg_fan_connect_verify(fan, data);
|
|
if (err < 0)
|
|
return err;
|
|
else if (!err) {
|
|
tacho_num++;
|
|
continue;
|
|
}
|
|
}
|
|
|
|
fan->tacho[tacho_num].reg = data->reg;
|
|
fan->tacho[tacho_num].mask = data->mask;
|
|
fan->tacho[tacho_num].prsnt = data->reg_prsnt;
|
|
fan->tacho[tacho_num++].connected = true;
|
|
tacho_avail++;
|
|
} else if (strnstr(data->label, "pwm", sizeof(data->label))) {
|
|
if (pwm_num == MLXREG_FAN_MAX_TACHO) {
|
|
dev_err(fan->dev, "too many pwm entries: %s\n",
|
|
data->label);
|
|
return -EINVAL;
|
|
}
|
|
|
|
/* Validate if more then one PWM is connected. */
|
|
if (pwm_num) {
|
|
err = mlxreg_pwm_connect_verify(fan, data);
|
|
if (err < 0)
|
|
return err;
|
|
else if (!err)
|
|
continue;
|
|
}
|
|
|
|
fan->pwm[pwm_num].reg = data->reg;
|
|
fan->pwm[pwm_num].connected = true;
|
|
pwm_num++;
|
|
} else if (strnstr(data->label, "conf", sizeof(data->label))) {
|
|
if (configured) {
|
|
dev_err(fan->dev, "duplicate conf entry: %s\n",
|
|
data->label);
|
|
return -EINVAL;
|
|
}
|
|
/* Validate that conf parameters are not zeros. */
|
|
if (!data->mask && !data->bit && !data->capability) {
|
|
dev_err(fan->dev, "invalid conf entry params: %s\n",
|
|
data->label);
|
|
return -EINVAL;
|
|
}
|
|
if (data->capability) {
|
|
err = mlxreg_fan_speed_divider_get(fan, data);
|
|
if (err)
|
|
return err;
|
|
} else {
|
|
if (data->mask)
|
|
fan->samples = data->mask;
|
|
if (data->bit)
|
|
fan->divider = data->bit;
|
|
}
|
|
configured = true;
|
|
} else {
|
|
dev_err(fan->dev, "invalid label: %s\n", data->label);
|
|
return -EINVAL;
|
|
}
|
|
}
|
|
|
|
if (pdata->capability) {
|
|
int drwr_avail;
|
|
u32 regval;
|
|
|
|
/* Obtain the number of FAN drawers, supported by system. */
|
|
err = regmap_read(fan->regmap, pdata->capability, ®val);
|
|
if (err) {
|
|
dev_err(fan->dev, "Failed to query capability register 0x%08x\n",
|
|
pdata->capability);
|
|
return err;
|
|
}
|
|
|
|
drwr_avail = hweight32(regval);
|
|
if (!tacho_avail || !drwr_avail || tacho_avail < drwr_avail) {
|
|
dev_err(fan->dev, "Configuration is invalid: drawers num %d tachos num %d\n",
|
|
drwr_avail, tacho_avail);
|
|
return -EINVAL;
|
|
}
|
|
|
|
/* Set the number of tachometers per one drawer. */
|
|
fan->tachos_per_drwr = tacho_avail / drwr_avail;
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int mlxreg_fan_cooling_config(struct device *dev, struct mlxreg_fan *fan)
|
|
{
|
|
int i, j;
|
|
|
|
for (i = 0; i < MLXREG_FAN_MAX_PWM; i++) {
|
|
struct mlxreg_fan_pwm *pwm = &fan->pwm[i];
|
|
|
|
if (!pwm->connected)
|
|
continue;
|
|
pwm->fan = fan;
|
|
pwm->cdev = devm_thermal_of_cooling_device_register(dev, NULL, mlxreg_fan_name[i],
|
|
pwm, &mlxreg_fan_cooling_ops);
|
|
if (IS_ERR(pwm->cdev)) {
|
|
dev_err(dev, "Failed to register cooling device\n");
|
|
return PTR_ERR(pwm->cdev);
|
|
}
|
|
|
|
/* Init cooling levels per PWM state. */
|
|
for (j = 0; j < MLXREG_FAN_SPEED_MIN_LEVEL; j++)
|
|
pwm->cooling_levels[j] = MLXREG_FAN_SPEED_MIN_LEVEL;
|
|
for (j = MLXREG_FAN_SPEED_MIN_LEVEL; j <= MLXREG_FAN_MAX_STATE; j++)
|
|
pwm->cooling_levels[j] = j;
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int mlxreg_fan_probe(struct platform_device *pdev)
|
|
{
|
|
struct mlxreg_core_platform_data *pdata;
|
|
struct device *dev = &pdev->dev;
|
|
struct mlxreg_fan *fan;
|
|
struct device *hwm;
|
|
int err;
|
|
|
|
pdata = dev_get_platdata(dev);
|
|
if (!pdata) {
|
|
dev_err(dev, "Failed to get platform data.\n");
|
|
return -EINVAL;
|
|
}
|
|
|
|
fan = devm_kzalloc(dev, sizeof(*fan), GFP_KERNEL);
|
|
if (!fan)
|
|
return -ENOMEM;
|
|
|
|
fan->dev = dev;
|
|
fan->regmap = pdata->regmap;
|
|
|
|
err = mlxreg_fan_config(fan, pdata);
|
|
if (err)
|
|
return err;
|
|
|
|
hwm = devm_hwmon_device_register_with_info(dev, "mlxreg_fan",
|
|
fan,
|
|
&mlxreg_fan_hwmon_chip_info,
|
|
NULL);
|
|
if (IS_ERR(hwm)) {
|
|
dev_err(dev, "Failed to register hwmon device\n");
|
|
return PTR_ERR(hwm);
|
|
}
|
|
|
|
if (IS_REACHABLE(CONFIG_THERMAL))
|
|
err = mlxreg_fan_cooling_config(dev, fan);
|
|
|
|
return err;
|
|
}
|
|
|
|
static struct platform_driver mlxreg_fan_driver = {
|
|
.driver = {
|
|
.name = "mlxreg-fan",
|
|
},
|
|
.probe = mlxreg_fan_probe,
|
|
};
|
|
|
|
module_platform_driver(mlxreg_fan_driver);
|
|
|
|
MODULE_AUTHOR("Vadim Pasternak <vadimp@mellanox.com>");
|
|
MODULE_DESCRIPTION("Mellanox FAN driver");
|
|
MODULE_LICENSE("GPL");
|
|
MODULE_ALIAS("platform:mlxreg-fan");
|