515 lines
11 KiB
C
515 lines
11 KiB
C
/*
|
|
* linux/drivers/char/21285.c
|
|
*
|
|
* Driver for the serial port on the 21285 StrongArm-110 core logic chip.
|
|
*
|
|
* Based on drivers/char/serial.c
|
|
*
|
|
* $Id: 21285.c,v 1.37 2002/07/28 10:03:27 rmk Exp $
|
|
*/
|
|
#include <linux/config.h>
|
|
#include <linux/module.h>
|
|
#include <linux/tty.h>
|
|
#include <linux/ioport.h>
|
|
#include <linux/init.h>
|
|
#include <linux/console.h>
|
|
#include <linux/device.h>
|
|
#include <linux/tty_flip.h>
|
|
#include <linux/serial_core.h>
|
|
#include <linux/serial.h>
|
|
|
|
#include <asm/io.h>
|
|
#include <asm/irq.h>
|
|
#include <asm/mach-types.h>
|
|
#include <asm/hardware/dec21285.h>
|
|
#include <asm/hardware.h>
|
|
|
|
#define BAUD_BASE (mem_fclk_21285/64)
|
|
|
|
#define SERIAL_21285_NAME "ttyFB"
|
|
#define SERIAL_21285_MAJOR 204
|
|
#define SERIAL_21285_MINOR 4
|
|
|
|
#define RXSTAT_DUMMY_READ 0x80000000
|
|
#define RXSTAT_FRAME (1 << 0)
|
|
#define RXSTAT_PARITY (1 << 1)
|
|
#define RXSTAT_OVERRUN (1 << 2)
|
|
#define RXSTAT_ANYERR (RXSTAT_FRAME|RXSTAT_PARITY|RXSTAT_OVERRUN)
|
|
|
|
#define H_UBRLCR_BREAK (1 << 0)
|
|
#define H_UBRLCR_PARENB (1 << 1)
|
|
#define H_UBRLCR_PAREVN (1 << 2)
|
|
#define H_UBRLCR_STOPB (1 << 3)
|
|
#define H_UBRLCR_FIFO (1 << 4)
|
|
|
|
static const char serial21285_name[] = "Footbridge UART";
|
|
|
|
#define tx_enabled(port) ((port)->unused[0])
|
|
#define rx_enabled(port) ((port)->unused[1])
|
|
|
|
/*
|
|
* The documented expression for selecting the divisor is:
|
|
* BAUD_BASE / baud - 1
|
|
* However, typically BAUD_BASE is not divisible by baud, so
|
|
* we want to select the divisor that gives us the minimum
|
|
* error. Therefore, we want:
|
|
* int(BAUD_BASE / baud - 0.5) ->
|
|
* int(BAUD_BASE / baud - (baud >> 1) / baud) ->
|
|
* int((BAUD_BASE - (baud >> 1)) / baud)
|
|
*/
|
|
|
|
static void serial21285_stop_tx(struct uart_port *port)
|
|
{
|
|
if (tx_enabled(port)) {
|
|
disable_irq(IRQ_CONTX);
|
|
tx_enabled(port) = 0;
|
|
}
|
|
}
|
|
|
|
static void serial21285_start_tx(struct uart_port *port)
|
|
{
|
|
if (!tx_enabled(port)) {
|
|
enable_irq(IRQ_CONTX);
|
|
tx_enabled(port) = 1;
|
|
}
|
|
}
|
|
|
|
static void serial21285_stop_rx(struct uart_port *port)
|
|
{
|
|
if (rx_enabled(port)) {
|
|
disable_irq(IRQ_CONRX);
|
|
rx_enabled(port) = 0;
|
|
}
|
|
}
|
|
|
|
static void serial21285_enable_ms(struct uart_port *port)
|
|
{
|
|
}
|
|
|
|
static irqreturn_t serial21285_rx_chars(int irq, void *dev_id, struct pt_regs *regs)
|
|
{
|
|
struct uart_port *port = dev_id;
|
|
struct tty_struct *tty = port->info->tty;
|
|
unsigned int status, ch, flag, rxs, max_count = 256;
|
|
|
|
status = *CSR_UARTFLG;
|
|
while (!(status & 0x10) && max_count--) {
|
|
ch = *CSR_UARTDR;
|
|
flag = TTY_NORMAL;
|
|
port->icount.rx++;
|
|
|
|
rxs = *CSR_RXSTAT | RXSTAT_DUMMY_READ;
|
|
if (unlikely(rxs & RXSTAT_ANYERR)) {
|
|
if (rxs & RXSTAT_PARITY)
|
|
port->icount.parity++;
|
|
else if (rxs & RXSTAT_FRAME)
|
|
port->icount.frame++;
|
|
if (rxs & RXSTAT_OVERRUN)
|
|
port->icount.overrun++;
|
|
|
|
rxs &= port->read_status_mask;
|
|
|
|
if (rxs & RXSTAT_PARITY)
|
|
flag = TTY_PARITY;
|
|
else if (rxs & RXSTAT_FRAME)
|
|
flag = TTY_FRAME;
|
|
}
|
|
|
|
uart_insert_char(port, rxs, RXSTAT_OVERRUN, ch, flag);
|
|
|
|
status = *CSR_UARTFLG;
|
|
}
|
|
tty_flip_buffer_push(tty);
|
|
|
|
return IRQ_HANDLED;
|
|
}
|
|
|
|
static irqreturn_t serial21285_tx_chars(int irq, void *dev_id, struct pt_regs *regs)
|
|
{
|
|
struct uart_port *port = dev_id;
|
|
struct circ_buf *xmit = &port->info->xmit;
|
|
int count = 256;
|
|
|
|
if (port->x_char) {
|
|
*CSR_UARTDR = port->x_char;
|
|
port->icount.tx++;
|
|
port->x_char = 0;
|
|
goto out;
|
|
}
|
|
if (uart_circ_empty(xmit) || uart_tx_stopped(port)) {
|
|
serial21285_stop_tx(port);
|
|
goto out;
|
|
}
|
|
|
|
do {
|
|
*CSR_UARTDR = xmit->buf[xmit->tail];
|
|
xmit->tail = (xmit->tail + 1) & (UART_XMIT_SIZE - 1);
|
|
port->icount.tx++;
|
|
if (uart_circ_empty(xmit))
|
|
break;
|
|
} while (--count > 0 && !(*CSR_UARTFLG & 0x20));
|
|
|
|
if (uart_circ_chars_pending(xmit) < WAKEUP_CHARS)
|
|
uart_write_wakeup(port);
|
|
|
|
if (uart_circ_empty(xmit))
|
|
serial21285_stop_tx(port);
|
|
|
|
out:
|
|
return IRQ_HANDLED;
|
|
}
|
|
|
|
static unsigned int serial21285_tx_empty(struct uart_port *port)
|
|
{
|
|
return (*CSR_UARTFLG & 8) ? 0 : TIOCSER_TEMT;
|
|
}
|
|
|
|
/* no modem control lines */
|
|
static unsigned int serial21285_get_mctrl(struct uart_port *port)
|
|
{
|
|
return TIOCM_CAR | TIOCM_DSR | TIOCM_CTS;
|
|
}
|
|
|
|
static void serial21285_set_mctrl(struct uart_port *port, unsigned int mctrl)
|
|
{
|
|
}
|
|
|
|
static void serial21285_break_ctl(struct uart_port *port, int break_state)
|
|
{
|
|
unsigned long flags;
|
|
unsigned int h_lcr;
|
|
|
|
spin_lock_irqsave(&port->lock, flags);
|
|
h_lcr = *CSR_H_UBRLCR;
|
|
if (break_state)
|
|
h_lcr |= H_UBRLCR_BREAK;
|
|
else
|
|
h_lcr &= ~H_UBRLCR_BREAK;
|
|
*CSR_H_UBRLCR = h_lcr;
|
|
spin_unlock_irqrestore(&port->lock, flags);
|
|
}
|
|
|
|
static int serial21285_startup(struct uart_port *port)
|
|
{
|
|
int ret;
|
|
|
|
tx_enabled(port) = 1;
|
|
rx_enabled(port) = 1;
|
|
|
|
ret = request_irq(IRQ_CONRX, serial21285_rx_chars, 0,
|
|
serial21285_name, port);
|
|
if (ret == 0) {
|
|
ret = request_irq(IRQ_CONTX, serial21285_tx_chars, 0,
|
|
serial21285_name, port);
|
|
if (ret)
|
|
free_irq(IRQ_CONRX, port);
|
|
}
|
|
|
|
return ret;
|
|
}
|
|
|
|
static void serial21285_shutdown(struct uart_port *port)
|
|
{
|
|
free_irq(IRQ_CONTX, port);
|
|
free_irq(IRQ_CONRX, port);
|
|
}
|
|
|
|
static void
|
|
serial21285_set_termios(struct uart_port *port, struct termios *termios,
|
|
struct termios *old)
|
|
{
|
|
unsigned long flags;
|
|
unsigned int baud, quot, h_lcr;
|
|
|
|
/*
|
|
* We don't support modem control lines.
|
|
*/
|
|
termios->c_cflag &= ~(HUPCL | CRTSCTS | CMSPAR);
|
|
termios->c_cflag |= CLOCAL;
|
|
|
|
/*
|
|
* We don't support BREAK character recognition.
|
|
*/
|
|
termios->c_iflag &= ~(IGNBRK | BRKINT);
|
|
|
|
/*
|
|
* Ask the core to calculate the divisor for us.
|
|
*/
|
|
baud = uart_get_baud_rate(port, termios, old, 0, port->uartclk/16);
|
|
quot = uart_get_divisor(port, baud);
|
|
|
|
switch (termios->c_cflag & CSIZE) {
|
|
case CS5:
|
|
h_lcr = 0x00;
|
|
break;
|
|
case CS6:
|
|
h_lcr = 0x20;
|
|
break;
|
|
case CS7:
|
|
h_lcr = 0x40;
|
|
break;
|
|
default: /* CS8 */
|
|
h_lcr = 0x60;
|
|
break;
|
|
}
|
|
|
|
if (termios->c_cflag & CSTOPB)
|
|
h_lcr |= H_UBRLCR_STOPB;
|
|
if (termios->c_cflag & PARENB) {
|
|
h_lcr |= H_UBRLCR_PARENB;
|
|
if (!(termios->c_cflag & PARODD))
|
|
h_lcr |= H_UBRLCR_PAREVN;
|
|
}
|
|
|
|
if (port->fifosize)
|
|
h_lcr |= H_UBRLCR_FIFO;
|
|
|
|
spin_lock_irqsave(&port->lock, flags);
|
|
|
|
/*
|
|
* Update the per-port timeout.
|
|
*/
|
|
uart_update_timeout(port, termios->c_cflag, baud);
|
|
|
|
/*
|
|
* Which character status flags are we interested in?
|
|
*/
|
|
port->read_status_mask = RXSTAT_OVERRUN;
|
|
if (termios->c_iflag & INPCK)
|
|
port->read_status_mask |= RXSTAT_FRAME | RXSTAT_PARITY;
|
|
|
|
/*
|
|
* Which character status flags should we ignore?
|
|
*/
|
|
port->ignore_status_mask = 0;
|
|
if (termios->c_iflag & IGNPAR)
|
|
port->ignore_status_mask |= RXSTAT_FRAME | RXSTAT_PARITY;
|
|
if (termios->c_iflag & IGNBRK && termios->c_iflag & IGNPAR)
|
|
port->ignore_status_mask |= RXSTAT_OVERRUN;
|
|
|
|
/*
|
|
* Ignore all characters if CREAD is not set.
|
|
*/
|
|
if ((termios->c_cflag & CREAD) == 0)
|
|
port->ignore_status_mask |= RXSTAT_DUMMY_READ;
|
|
|
|
quot -= 1;
|
|
|
|
*CSR_UARTCON = 0;
|
|
*CSR_L_UBRLCR = quot & 0xff;
|
|
*CSR_M_UBRLCR = (quot >> 8) & 0x0f;
|
|
*CSR_H_UBRLCR = h_lcr;
|
|
*CSR_UARTCON = 1;
|
|
|
|
spin_unlock_irqrestore(&port->lock, flags);
|
|
}
|
|
|
|
static const char *serial21285_type(struct uart_port *port)
|
|
{
|
|
return port->type == PORT_21285 ? "DC21285" : NULL;
|
|
}
|
|
|
|
static void serial21285_release_port(struct uart_port *port)
|
|
{
|
|
release_mem_region(port->mapbase, 32);
|
|
}
|
|
|
|
static int serial21285_request_port(struct uart_port *port)
|
|
{
|
|
return request_mem_region(port->mapbase, 32, serial21285_name)
|
|
!= NULL ? 0 : -EBUSY;
|
|
}
|
|
|
|
static void serial21285_config_port(struct uart_port *port, int flags)
|
|
{
|
|
if (flags & UART_CONFIG_TYPE && serial21285_request_port(port) == 0)
|
|
port->type = PORT_21285;
|
|
}
|
|
|
|
/*
|
|
* verify the new serial_struct (for TIOCSSERIAL).
|
|
*/
|
|
static int serial21285_verify_port(struct uart_port *port, struct serial_struct *ser)
|
|
{
|
|
int ret = 0;
|
|
if (ser->type != PORT_UNKNOWN && ser->type != PORT_21285)
|
|
ret = -EINVAL;
|
|
if (ser->irq != NO_IRQ)
|
|
ret = -EINVAL;
|
|
if (ser->baud_base != port->uartclk / 16)
|
|
ret = -EINVAL;
|
|
return ret;
|
|
}
|
|
|
|
static struct uart_ops serial21285_ops = {
|
|
.tx_empty = serial21285_tx_empty,
|
|
.get_mctrl = serial21285_get_mctrl,
|
|
.set_mctrl = serial21285_set_mctrl,
|
|
.stop_tx = serial21285_stop_tx,
|
|
.start_tx = serial21285_start_tx,
|
|
.stop_rx = serial21285_stop_rx,
|
|
.enable_ms = serial21285_enable_ms,
|
|
.break_ctl = serial21285_break_ctl,
|
|
.startup = serial21285_startup,
|
|
.shutdown = serial21285_shutdown,
|
|
.set_termios = serial21285_set_termios,
|
|
.type = serial21285_type,
|
|
.release_port = serial21285_release_port,
|
|
.request_port = serial21285_request_port,
|
|
.config_port = serial21285_config_port,
|
|
.verify_port = serial21285_verify_port,
|
|
};
|
|
|
|
static struct uart_port serial21285_port = {
|
|
.mapbase = 0x42000160,
|
|
.iotype = UPIO_MEM,
|
|
.irq = NO_IRQ,
|
|
.fifosize = 16,
|
|
.ops = &serial21285_ops,
|
|
.flags = UPF_BOOT_AUTOCONF,
|
|
};
|
|
|
|
static void serial21285_setup_ports(void)
|
|
{
|
|
serial21285_port.uartclk = mem_fclk_21285 / 4;
|
|
}
|
|
|
|
#ifdef CONFIG_SERIAL_21285_CONSOLE
|
|
static void serial21285_console_putchar(struct uart_port *port, int ch)
|
|
{
|
|
while (*CSR_UARTFLG & 0x20)
|
|
barrier();
|
|
*CSR_UARTDR = ch;
|
|
}
|
|
|
|
static void
|
|
serial21285_console_write(struct console *co, const char *s,
|
|
unsigned int count)
|
|
{
|
|
uart_console_write(&serial21285_port, s, count, serial21285_console_putchar);
|
|
}
|
|
|
|
static void __init
|
|
serial21285_get_options(struct uart_port *port, int *baud,
|
|
int *parity, int *bits)
|
|
{
|
|
if (*CSR_UARTCON == 1) {
|
|
unsigned int tmp;
|
|
|
|
tmp = *CSR_H_UBRLCR;
|
|
switch (tmp & 0x60) {
|
|
case 0x00:
|
|
*bits = 5;
|
|
break;
|
|
case 0x20:
|
|
*bits = 6;
|
|
break;
|
|
case 0x40:
|
|
*bits = 7;
|
|
break;
|
|
default:
|
|
case 0x60:
|
|
*bits = 8;
|
|
break;
|
|
}
|
|
|
|
if (tmp & H_UBRLCR_PARENB) {
|
|
*parity = 'o';
|
|
if (tmp & H_UBRLCR_PAREVN)
|
|
*parity = 'e';
|
|
}
|
|
|
|
tmp = *CSR_L_UBRLCR | (*CSR_M_UBRLCR << 8);
|
|
|
|
*baud = port->uartclk / (16 * (tmp + 1));
|
|
}
|
|
}
|
|
|
|
static int __init serial21285_console_setup(struct console *co, char *options)
|
|
{
|
|
struct uart_port *port = &serial21285_port;
|
|
int baud = 9600;
|
|
int bits = 8;
|
|
int parity = 'n';
|
|
int flow = 'n';
|
|
|
|
if (machine_is_personal_server())
|
|
baud = 57600;
|
|
|
|
/*
|
|
* Check whether an invalid uart number has been specified, and
|
|
* if so, search for the first available port that does have
|
|
* console support.
|
|
*/
|
|
if (options)
|
|
uart_parse_options(options, &baud, &parity, &bits, &flow);
|
|
else
|
|
serial21285_get_options(port, &baud, &parity, &bits);
|
|
|
|
return uart_set_options(port, co, baud, parity, bits, flow);
|
|
}
|
|
|
|
static struct uart_driver serial21285_reg;
|
|
|
|
static struct console serial21285_console =
|
|
{
|
|
.name = SERIAL_21285_NAME,
|
|
.write = serial21285_console_write,
|
|
.device = uart_console_device,
|
|
.setup = serial21285_console_setup,
|
|
.flags = CON_PRINTBUFFER,
|
|
.index = -1,
|
|
.data = &serial21285_reg,
|
|
};
|
|
|
|
static int __init rs285_console_init(void)
|
|
{
|
|
serial21285_setup_ports();
|
|
register_console(&serial21285_console);
|
|
return 0;
|
|
}
|
|
console_initcall(rs285_console_init);
|
|
|
|
#define SERIAL_21285_CONSOLE &serial21285_console
|
|
#else
|
|
#define SERIAL_21285_CONSOLE NULL
|
|
#endif
|
|
|
|
static struct uart_driver serial21285_reg = {
|
|
.owner = THIS_MODULE,
|
|
.driver_name = "ttyFB",
|
|
.dev_name = "ttyFB",
|
|
.major = SERIAL_21285_MAJOR,
|
|
.minor = SERIAL_21285_MINOR,
|
|
.nr = 1,
|
|
.cons = SERIAL_21285_CONSOLE,
|
|
};
|
|
|
|
static int __init serial21285_init(void)
|
|
{
|
|
int ret;
|
|
|
|
printk(KERN_INFO "Serial: 21285 driver $Revision: 1.37 $\n");
|
|
|
|
serial21285_setup_ports();
|
|
|
|
ret = uart_register_driver(&serial21285_reg);
|
|
if (ret == 0)
|
|
uart_add_one_port(&serial21285_reg, &serial21285_port);
|
|
|
|
return ret;
|
|
}
|
|
|
|
static void __exit serial21285_exit(void)
|
|
{
|
|
uart_remove_one_port(&serial21285_reg, &serial21285_port);
|
|
uart_unregister_driver(&serial21285_reg);
|
|
}
|
|
|
|
module_init(serial21285_init);
|
|
module_exit(serial21285_exit);
|
|
|
|
MODULE_LICENSE("GPL");
|
|
MODULE_DESCRIPTION("Intel Footbridge (21285) serial driver $Revision: 1.37 $");
|
|
MODULE_ALIAS_CHARDEV(SERIAL_21285_MAJOR, SERIAL_21285_MINOR);
|