680 lines
18 KiB
C
680 lines
18 KiB
C
/*
|
|
* Broadcom Kona GPIO Driver
|
|
*
|
|
* Author: Broadcom Corporation <bcm-kernel-feedback-list@broadcom.com>
|
|
* Copyright (C) 2012-2014 Broadcom Corporation
|
|
*
|
|
* This program is free software; you can redistribute it and/or
|
|
* modify it under the terms of the GNU General Public License as
|
|
* published by the Free Software Foundation version 2.
|
|
*
|
|
* This program is distributed "as is" WITHOUT ANY WARRANTY of any
|
|
* kind, whether express or implied; without even the implied warranty
|
|
* of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
|
* GNU General Public License for more details.
|
|
*/
|
|
|
|
#include <linux/bitops.h>
|
|
#include <linux/err.h>
|
|
#include <linux/io.h>
|
|
#include <linux/gpio/driver.h>
|
|
#include <linux/of_device.h>
|
|
#include <linux/of_irq.h>
|
|
#include <linux/init.h>
|
|
#include <linux/irqdomain.h>
|
|
#include <linux/irqchip/chained_irq.h>
|
|
|
|
#define BCM_GPIO_PASSWD 0x00a5a501
|
|
#define GPIO_PER_BANK 32
|
|
#define GPIO_MAX_BANK_NUM 8
|
|
|
|
#define GPIO_BANK(gpio) ((gpio) >> 5)
|
|
#define GPIO_BIT(gpio) ((gpio) & (GPIO_PER_BANK - 1))
|
|
|
|
/* There is a GPIO control register for each GPIO */
|
|
#define GPIO_CONTROL(gpio) (0x00000100 + ((gpio) << 2))
|
|
|
|
/* The remaining registers are per GPIO bank */
|
|
#define GPIO_OUT_STATUS(bank) (0x00000000 + ((bank) << 2))
|
|
#define GPIO_IN_STATUS(bank) (0x00000020 + ((bank) << 2))
|
|
#define GPIO_OUT_SET(bank) (0x00000040 + ((bank) << 2))
|
|
#define GPIO_OUT_CLEAR(bank) (0x00000060 + ((bank) << 2))
|
|
#define GPIO_INT_STATUS(bank) (0x00000080 + ((bank) << 2))
|
|
#define GPIO_INT_MASK(bank) (0x000000a0 + ((bank) << 2))
|
|
#define GPIO_INT_MSKCLR(bank) (0x000000c0 + ((bank) << 2))
|
|
#define GPIO_PWD_STATUS(bank) (0x00000500 + ((bank) << 2))
|
|
|
|
#define GPIO_GPPWR_OFFSET 0x00000520
|
|
|
|
#define GPIO_GPCTR0_DBR_SHIFT 5
|
|
#define GPIO_GPCTR0_DBR_MASK 0x000001e0
|
|
|
|
#define GPIO_GPCTR0_ITR_SHIFT 3
|
|
#define GPIO_GPCTR0_ITR_MASK 0x00000018
|
|
#define GPIO_GPCTR0_ITR_CMD_RISING_EDGE 0x00000001
|
|
#define GPIO_GPCTR0_ITR_CMD_FALLING_EDGE 0x00000002
|
|
#define GPIO_GPCTR0_ITR_CMD_BOTH_EDGE 0x00000003
|
|
|
|
#define GPIO_GPCTR0_IOTR_MASK 0x00000001
|
|
#define GPIO_GPCTR0_IOTR_CMD_0UTPUT 0x00000000
|
|
#define GPIO_GPCTR0_IOTR_CMD_INPUT 0x00000001
|
|
|
|
#define GPIO_GPCTR0_DB_ENABLE_MASK 0x00000100
|
|
|
|
#define LOCK_CODE 0xffffffff
|
|
#define UNLOCK_CODE 0x00000000
|
|
|
|
struct bcm_kona_gpio {
|
|
void __iomem *reg_base;
|
|
int num_bank;
|
|
raw_spinlock_t lock;
|
|
struct gpio_chip gpio_chip;
|
|
struct irq_domain *irq_domain;
|
|
struct bcm_kona_gpio_bank *banks;
|
|
struct platform_device *pdev;
|
|
};
|
|
|
|
struct bcm_kona_gpio_bank {
|
|
int id;
|
|
int irq;
|
|
/* Used in the interrupt handler */
|
|
struct bcm_kona_gpio *kona_gpio;
|
|
};
|
|
|
|
static inline void bcm_kona_gpio_write_lock_regs(void __iomem *reg_base,
|
|
int bank_id, u32 lockcode)
|
|
{
|
|
writel(BCM_GPIO_PASSWD, reg_base + GPIO_GPPWR_OFFSET);
|
|
writel(lockcode, reg_base + GPIO_PWD_STATUS(bank_id));
|
|
}
|
|
|
|
static void bcm_kona_gpio_lock_gpio(struct bcm_kona_gpio *kona_gpio,
|
|
unsigned gpio)
|
|
{
|
|
u32 val;
|
|
unsigned long flags;
|
|
int bank_id = GPIO_BANK(gpio);
|
|
|
|
raw_spin_lock_irqsave(&kona_gpio->lock, flags);
|
|
|
|
val = readl(kona_gpio->reg_base + GPIO_PWD_STATUS(bank_id));
|
|
val |= BIT(gpio);
|
|
bcm_kona_gpio_write_lock_regs(kona_gpio->reg_base, bank_id, val);
|
|
|
|
raw_spin_unlock_irqrestore(&kona_gpio->lock, flags);
|
|
}
|
|
|
|
static void bcm_kona_gpio_unlock_gpio(struct bcm_kona_gpio *kona_gpio,
|
|
unsigned gpio)
|
|
{
|
|
u32 val;
|
|
unsigned long flags;
|
|
int bank_id = GPIO_BANK(gpio);
|
|
|
|
raw_spin_lock_irqsave(&kona_gpio->lock, flags);
|
|
|
|
val = readl(kona_gpio->reg_base + GPIO_PWD_STATUS(bank_id));
|
|
val &= ~BIT(gpio);
|
|
bcm_kona_gpio_write_lock_regs(kona_gpio->reg_base, bank_id, val);
|
|
|
|
raw_spin_unlock_irqrestore(&kona_gpio->lock, flags);
|
|
}
|
|
|
|
static int bcm_kona_gpio_get_dir(struct gpio_chip *chip, unsigned gpio)
|
|
{
|
|
struct bcm_kona_gpio *kona_gpio = gpiochip_get_data(chip);
|
|
void __iomem *reg_base = kona_gpio->reg_base;
|
|
u32 val;
|
|
|
|
val = readl(reg_base + GPIO_CONTROL(gpio)) & GPIO_GPCTR0_IOTR_MASK;
|
|
return !!val;
|
|
}
|
|
|
|
static void bcm_kona_gpio_set(struct gpio_chip *chip, unsigned gpio, int value)
|
|
{
|
|
struct bcm_kona_gpio *kona_gpio;
|
|
void __iomem *reg_base;
|
|
int bank_id = GPIO_BANK(gpio);
|
|
int bit = GPIO_BIT(gpio);
|
|
u32 val, reg_offset;
|
|
unsigned long flags;
|
|
|
|
kona_gpio = gpiochip_get_data(chip);
|
|
reg_base = kona_gpio->reg_base;
|
|
raw_spin_lock_irqsave(&kona_gpio->lock, flags);
|
|
|
|
/* this function only applies to output pin */
|
|
if (bcm_kona_gpio_get_dir(chip, gpio) == 1)
|
|
goto out;
|
|
|
|
reg_offset = value ? GPIO_OUT_SET(bank_id) : GPIO_OUT_CLEAR(bank_id);
|
|
|
|
val = readl(reg_base + reg_offset);
|
|
val |= BIT(bit);
|
|
writel(val, reg_base + reg_offset);
|
|
|
|
out:
|
|
raw_spin_unlock_irqrestore(&kona_gpio->lock, flags);
|
|
}
|
|
|
|
static int bcm_kona_gpio_get(struct gpio_chip *chip, unsigned gpio)
|
|
{
|
|
struct bcm_kona_gpio *kona_gpio;
|
|
void __iomem *reg_base;
|
|
int bank_id = GPIO_BANK(gpio);
|
|
int bit = GPIO_BIT(gpio);
|
|
u32 val, reg_offset;
|
|
unsigned long flags;
|
|
|
|
kona_gpio = gpiochip_get_data(chip);
|
|
reg_base = kona_gpio->reg_base;
|
|
raw_spin_lock_irqsave(&kona_gpio->lock, flags);
|
|
|
|
if (bcm_kona_gpio_get_dir(chip, gpio) == 1)
|
|
reg_offset = GPIO_IN_STATUS(bank_id);
|
|
else
|
|
reg_offset = GPIO_OUT_STATUS(bank_id);
|
|
|
|
/* read the GPIO bank status */
|
|
val = readl(reg_base + reg_offset);
|
|
|
|
raw_spin_unlock_irqrestore(&kona_gpio->lock, flags);
|
|
|
|
/* return the specified bit status */
|
|
return !!(val & BIT(bit));
|
|
}
|
|
|
|
static int bcm_kona_gpio_request(struct gpio_chip *chip, unsigned gpio)
|
|
{
|
|
struct bcm_kona_gpio *kona_gpio = gpiochip_get_data(chip);
|
|
|
|
bcm_kona_gpio_unlock_gpio(kona_gpio, gpio);
|
|
return 0;
|
|
}
|
|
|
|
static void bcm_kona_gpio_free(struct gpio_chip *chip, unsigned gpio)
|
|
{
|
|
struct bcm_kona_gpio *kona_gpio = gpiochip_get_data(chip);
|
|
|
|
bcm_kona_gpio_lock_gpio(kona_gpio, gpio);
|
|
}
|
|
|
|
static int bcm_kona_gpio_direction_input(struct gpio_chip *chip, unsigned gpio)
|
|
{
|
|
struct bcm_kona_gpio *kona_gpio;
|
|
void __iomem *reg_base;
|
|
u32 val;
|
|
unsigned long flags;
|
|
|
|
kona_gpio = gpiochip_get_data(chip);
|
|
reg_base = kona_gpio->reg_base;
|
|
raw_spin_lock_irqsave(&kona_gpio->lock, flags);
|
|
|
|
val = readl(reg_base + GPIO_CONTROL(gpio));
|
|
val &= ~GPIO_GPCTR0_IOTR_MASK;
|
|
val |= GPIO_GPCTR0_IOTR_CMD_INPUT;
|
|
writel(val, reg_base + GPIO_CONTROL(gpio));
|
|
|
|
raw_spin_unlock_irqrestore(&kona_gpio->lock, flags);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int bcm_kona_gpio_direction_output(struct gpio_chip *chip,
|
|
unsigned gpio, int value)
|
|
{
|
|
struct bcm_kona_gpio *kona_gpio;
|
|
void __iomem *reg_base;
|
|
int bank_id = GPIO_BANK(gpio);
|
|
int bit = GPIO_BIT(gpio);
|
|
u32 val, reg_offset;
|
|
unsigned long flags;
|
|
|
|
kona_gpio = gpiochip_get_data(chip);
|
|
reg_base = kona_gpio->reg_base;
|
|
raw_spin_lock_irqsave(&kona_gpio->lock, flags);
|
|
|
|
val = readl(reg_base + GPIO_CONTROL(gpio));
|
|
val &= ~GPIO_GPCTR0_IOTR_MASK;
|
|
val |= GPIO_GPCTR0_IOTR_CMD_0UTPUT;
|
|
writel(val, reg_base + GPIO_CONTROL(gpio));
|
|
reg_offset = value ? GPIO_OUT_SET(bank_id) : GPIO_OUT_CLEAR(bank_id);
|
|
|
|
val = readl(reg_base + reg_offset);
|
|
val |= BIT(bit);
|
|
writel(val, reg_base + reg_offset);
|
|
|
|
raw_spin_unlock_irqrestore(&kona_gpio->lock, flags);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int bcm_kona_gpio_to_irq(struct gpio_chip *chip, unsigned gpio)
|
|
{
|
|
struct bcm_kona_gpio *kona_gpio;
|
|
|
|
kona_gpio = gpiochip_get_data(chip);
|
|
if (gpio >= kona_gpio->gpio_chip.ngpio)
|
|
return -ENXIO;
|
|
return irq_create_mapping(kona_gpio->irq_domain, gpio);
|
|
}
|
|
|
|
static int bcm_kona_gpio_set_debounce(struct gpio_chip *chip, unsigned gpio,
|
|
unsigned debounce)
|
|
{
|
|
struct bcm_kona_gpio *kona_gpio;
|
|
void __iomem *reg_base;
|
|
u32 val, res;
|
|
unsigned long flags;
|
|
|
|
kona_gpio = gpiochip_get_data(chip);
|
|
reg_base = kona_gpio->reg_base;
|
|
/* debounce must be 1-128ms (or 0) */
|
|
if ((debounce > 0 && debounce < 1000) || debounce > 128000) {
|
|
dev_err(chip->parent, "Debounce value %u not in range\n",
|
|
debounce);
|
|
return -EINVAL;
|
|
}
|
|
|
|
/* calculate debounce bit value */
|
|
if (debounce != 0) {
|
|
/* Convert to ms */
|
|
debounce /= 1000;
|
|
/* find the MSB */
|
|
res = fls(debounce) - 1;
|
|
/* Check if MSB-1 is set (round up or down) */
|
|
if (res > 0 && (debounce & BIT(res - 1)))
|
|
res++;
|
|
}
|
|
|
|
/* spin lock for read-modify-write of the GPIO register */
|
|
raw_spin_lock_irqsave(&kona_gpio->lock, flags);
|
|
|
|
val = readl(reg_base + GPIO_CONTROL(gpio));
|
|
val &= ~GPIO_GPCTR0_DBR_MASK;
|
|
|
|
if (debounce == 0) {
|
|
/* disable debounce */
|
|
val &= ~GPIO_GPCTR0_DB_ENABLE_MASK;
|
|
} else {
|
|
val |= GPIO_GPCTR0_DB_ENABLE_MASK |
|
|
(res << GPIO_GPCTR0_DBR_SHIFT);
|
|
}
|
|
|
|
writel(val, reg_base + GPIO_CONTROL(gpio));
|
|
|
|
raw_spin_unlock_irqrestore(&kona_gpio->lock, flags);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int bcm_kona_gpio_set_config(struct gpio_chip *chip, unsigned gpio,
|
|
unsigned long config)
|
|
{
|
|
u32 debounce;
|
|
|
|
if (pinconf_to_config_param(config) != PIN_CONFIG_INPUT_DEBOUNCE)
|
|
return -ENOTSUPP;
|
|
|
|
debounce = pinconf_to_config_argument(config);
|
|
return bcm_kona_gpio_set_debounce(chip, gpio, debounce);
|
|
}
|
|
|
|
static const struct gpio_chip template_chip = {
|
|
.label = "bcm-kona-gpio",
|
|
.owner = THIS_MODULE,
|
|
.request = bcm_kona_gpio_request,
|
|
.free = bcm_kona_gpio_free,
|
|
.get_direction = bcm_kona_gpio_get_dir,
|
|
.direction_input = bcm_kona_gpio_direction_input,
|
|
.get = bcm_kona_gpio_get,
|
|
.direction_output = bcm_kona_gpio_direction_output,
|
|
.set = bcm_kona_gpio_set,
|
|
.set_config = bcm_kona_gpio_set_config,
|
|
.to_irq = bcm_kona_gpio_to_irq,
|
|
.base = 0,
|
|
};
|
|
|
|
static void bcm_kona_gpio_irq_ack(struct irq_data *d)
|
|
{
|
|
struct bcm_kona_gpio *kona_gpio;
|
|
void __iomem *reg_base;
|
|
unsigned gpio = d->hwirq;
|
|
int bank_id = GPIO_BANK(gpio);
|
|
int bit = GPIO_BIT(gpio);
|
|
u32 val;
|
|
unsigned long flags;
|
|
|
|
kona_gpio = irq_data_get_irq_chip_data(d);
|
|
reg_base = kona_gpio->reg_base;
|
|
raw_spin_lock_irqsave(&kona_gpio->lock, flags);
|
|
|
|
val = readl(reg_base + GPIO_INT_STATUS(bank_id));
|
|
val |= BIT(bit);
|
|
writel(val, reg_base + GPIO_INT_STATUS(bank_id));
|
|
|
|
raw_spin_unlock_irqrestore(&kona_gpio->lock, flags);
|
|
}
|
|
|
|
static void bcm_kona_gpio_irq_mask(struct irq_data *d)
|
|
{
|
|
struct bcm_kona_gpio *kona_gpio;
|
|
void __iomem *reg_base;
|
|
unsigned gpio = d->hwirq;
|
|
int bank_id = GPIO_BANK(gpio);
|
|
int bit = GPIO_BIT(gpio);
|
|
u32 val;
|
|
unsigned long flags;
|
|
|
|
kona_gpio = irq_data_get_irq_chip_data(d);
|
|
reg_base = kona_gpio->reg_base;
|
|
raw_spin_lock_irqsave(&kona_gpio->lock, flags);
|
|
|
|
val = readl(reg_base + GPIO_INT_MASK(bank_id));
|
|
val |= BIT(bit);
|
|
writel(val, reg_base + GPIO_INT_MASK(bank_id));
|
|
|
|
raw_spin_unlock_irqrestore(&kona_gpio->lock, flags);
|
|
}
|
|
|
|
static void bcm_kona_gpio_irq_unmask(struct irq_data *d)
|
|
{
|
|
struct bcm_kona_gpio *kona_gpio;
|
|
void __iomem *reg_base;
|
|
unsigned gpio = d->hwirq;
|
|
int bank_id = GPIO_BANK(gpio);
|
|
int bit = GPIO_BIT(gpio);
|
|
u32 val;
|
|
unsigned long flags;
|
|
|
|
kona_gpio = irq_data_get_irq_chip_data(d);
|
|
reg_base = kona_gpio->reg_base;
|
|
raw_spin_lock_irqsave(&kona_gpio->lock, flags);
|
|
|
|
val = readl(reg_base + GPIO_INT_MSKCLR(bank_id));
|
|
val |= BIT(bit);
|
|
writel(val, reg_base + GPIO_INT_MSKCLR(bank_id));
|
|
|
|
raw_spin_unlock_irqrestore(&kona_gpio->lock, flags);
|
|
}
|
|
|
|
static int bcm_kona_gpio_irq_set_type(struct irq_data *d, unsigned int type)
|
|
{
|
|
struct bcm_kona_gpio *kona_gpio;
|
|
void __iomem *reg_base;
|
|
unsigned gpio = d->hwirq;
|
|
u32 lvl_type;
|
|
u32 val;
|
|
unsigned long flags;
|
|
|
|
kona_gpio = irq_data_get_irq_chip_data(d);
|
|
reg_base = kona_gpio->reg_base;
|
|
switch (type & IRQ_TYPE_SENSE_MASK) {
|
|
case IRQ_TYPE_EDGE_RISING:
|
|
lvl_type = GPIO_GPCTR0_ITR_CMD_RISING_EDGE;
|
|
break;
|
|
|
|
case IRQ_TYPE_EDGE_FALLING:
|
|
lvl_type = GPIO_GPCTR0_ITR_CMD_FALLING_EDGE;
|
|
break;
|
|
|
|
case IRQ_TYPE_EDGE_BOTH:
|
|
lvl_type = GPIO_GPCTR0_ITR_CMD_BOTH_EDGE;
|
|
break;
|
|
|
|
case IRQ_TYPE_LEVEL_HIGH:
|
|
case IRQ_TYPE_LEVEL_LOW:
|
|
/* BCM GPIO doesn't support level triggering */
|
|
default:
|
|
dev_err(kona_gpio->gpio_chip.parent,
|
|
"Invalid BCM GPIO irq type 0x%x\n", type);
|
|
return -EINVAL;
|
|
}
|
|
|
|
raw_spin_lock_irqsave(&kona_gpio->lock, flags);
|
|
|
|
val = readl(reg_base + GPIO_CONTROL(gpio));
|
|
val &= ~GPIO_GPCTR0_ITR_MASK;
|
|
val |= lvl_type << GPIO_GPCTR0_ITR_SHIFT;
|
|
writel(val, reg_base + GPIO_CONTROL(gpio));
|
|
|
|
raw_spin_unlock_irqrestore(&kona_gpio->lock, flags);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static void bcm_kona_gpio_irq_handler(struct irq_desc *desc)
|
|
{
|
|
void __iomem *reg_base;
|
|
int bit, bank_id;
|
|
unsigned long sta;
|
|
struct bcm_kona_gpio_bank *bank = irq_desc_get_handler_data(desc);
|
|
struct irq_chip *chip = irq_desc_get_chip(desc);
|
|
|
|
chained_irq_enter(chip, desc);
|
|
|
|
/*
|
|
* For bank interrupts, we can't use chip_data to store the kona_gpio
|
|
* pointer, since GIC needs it for its own purposes. Therefore, we get
|
|
* our pointer from the bank structure.
|
|
*/
|
|
reg_base = bank->kona_gpio->reg_base;
|
|
bank_id = bank->id;
|
|
|
|
while ((sta = readl(reg_base + GPIO_INT_STATUS(bank_id)) &
|
|
(~(readl(reg_base + GPIO_INT_MASK(bank_id)))))) {
|
|
for_each_set_bit(bit, &sta, 32) {
|
|
int hwirq = GPIO_PER_BANK * bank_id + bit;
|
|
int child_irq =
|
|
irq_find_mapping(bank->kona_gpio->irq_domain,
|
|
hwirq);
|
|
/*
|
|
* Clear interrupt before handler is called so we don't
|
|
* miss any interrupt occurred during executing them.
|
|
*/
|
|
writel(readl(reg_base + GPIO_INT_STATUS(bank_id)) |
|
|
BIT(bit), reg_base + GPIO_INT_STATUS(bank_id));
|
|
/* Invoke interrupt handler */
|
|
generic_handle_irq(child_irq);
|
|
}
|
|
}
|
|
|
|
chained_irq_exit(chip, desc);
|
|
}
|
|
|
|
static int bcm_kona_gpio_irq_reqres(struct irq_data *d)
|
|
{
|
|
struct bcm_kona_gpio *kona_gpio = irq_data_get_irq_chip_data(d);
|
|
int ret;
|
|
|
|
ret = gpiochip_lock_as_irq(&kona_gpio->gpio_chip, d->hwirq);
|
|
if (ret) {
|
|
dev_err(kona_gpio->gpio_chip.parent,
|
|
"unable to lock HW IRQ %lu for IRQ\n",
|
|
d->hwirq);
|
|
return ret;
|
|
}
|
|
return 0;
|
|
}
|
|
|
|
static void bcm_kona_gpio_irq_relres(struct irq_data *d)
|
|
{
|
|
struct bcm_kona_gpio *kona_gpio = irq_data_get_irq_chip_data(d);
|
|
|
|
gpiochip_unlock_as_irq(&kona_gpio->gpio_chip, d->hwirq);
|
|
}
|
|
|
|
static struct irq_chip bcm_gpio_irq_chip = {
|
|
.name = "bcm-kona-gpio",
|
|
.irq_ack = bcm_kona_gpio_irq_ack,
|
|
.irq_mask = bcm_kona_gpio_irq_mask,
|
|
.irq_unmask = bcm_kona_gpio_irq_unmask,
|
|
.irq_set_type = bcm_kona_gpio_irq_set_type,
|
|
.irq_request_resources = bcm_kona_gpio_irq_reqres,
|
|
.irq_release_resources = bcm_kona_gpio_irq_relres,
|
|
};
|
|
|
|
static struct of_device_id const bcm_kona_gpio_of_match[] = {
|
|
{ .compatible = "brcm,kona-gpio" },
|
|
{}
|
|
};
|
|
|
|
/*
|
|
* This lock class tells lockdep that GPIO irqs are in a different
|
|
* category than their parents, so it won't report false recursion.
|
|
*/
|
|
static struct lock_class_key gpio_lock_class;
|
|
static struct lock_class_key gpio_request_class;
|
|
|
|
static int bcm_kona_gpio_irq_map(struct irq_domain *d, unsigned int irq,
|
|
irq_hw_number_t hwirq)
|
|
{
|
|
int ret;
|
|
|
|
ret = irq_set_chip_data(irq, d->host_data);
|
|
if (ret < 0)
|
|
return ret;
|
|
irq_set_lockdep_class(irq, &gpio_lock_class, &gpio_request_class);
|
|
irq_set_chip_and_handler(irq, &bcm_gpio_irq_chip, handle_simple_irq);
|
|
irq_set_noprobe(irq);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static void bcm_kona_gpio_irq_unmap(struct irq_domain *d, unsigned int irq)
|
|
{
|
|
irq_set_chip_and_handler(irq, NULL, NULL);
|
|
irq_set_chip_data(irq, NULL);
|
|
}
|
|
|
|
static const struct irq_domain_ops bcm_kona_irq_ops = {
|
|
.map = bcm_kona_gpio_irq_map,
|
|
.unmap = bcm_kona_gpio_irq_unmap,
|
|
.xlate = irq_domain_xlate_twocell,
|
|
};
|
|
|
|
static void bcm_kona_gpio_reset(struct bcm_kona_gpio *kona_gpio)
|
|
{
|
|
void __iomem *reg_base;
|
|
int i;
|
|
|
|
reg_base = kona_gpio->reg_base;
|
|
/* disable interrupts and clear status */
|
|
for (i = 0; i < kona_gpio->num_bank; i++) {
|
|
/* Unlock the entire bank first */
|
|
bcm_kona_gpio_write_lock_regs(reg_base, i, UNLOCK_CODE);
|
|
writel(0xffffffff, reg_base + GPIO_INT_MASK(i));
|
|
writel(0xffffffff, reg_base + GPIO_INT_STATUS(i));
|
|
/* Now re-lock the bank */
|
|
bcm_kona_gpio_write_lock_regs(reg_base, i, LOCK_CODE);
|
|
}
|
|
}
|
|
|
|
static int bcm_kona_gpio_probe(struct platform_device *pdev)
|
|
{
|
|
struct device *dev = &pdev->dev;
|
|
const struct of_device_id *match;
|
|
struct resource *res;
|
|
struct bcm_kona_gpio_bank *bank;
|
|
struct bcm_kona_gpio *kona_gpio;
|
|
struct gpio_chip *chip;
|
|
int ret;
|
|
int i;
|
|
|
|
match = of_match_device(bcm_kona_gpio_of_match, dev);
|
|
if (!match) {
|
|
dev_err(dev, "Failed to find gpio controller\n");
|
|
return -ENODEV;
|
|
}
|
|
|
|
kona_gpio = devm_kzalloc(dev, sizeof(*kona_gpio), GFP_KERNEL);
|
|
if (!kona_gpio)
|
|
return -ENOMEM;
|
|
|
|
kona_gpio->gpio_chip = template_chip;
|
|
chip = &kona_gpio->gpio_chip;
|
|
kona_gpio->num_bank = of_irq_count(dev->of_node);
|
|
if (kona_gpio->num_bank == 0) {
|
|
dev_err(dev, "Couldn't determine # GPIO banks\n");
|
|
return -ENOENT;
|
|
}
|
|
if (kona_gpio->num_bank > GPIO_MAX_BANK_NUM) {
|
|
dev_err(dev, "Too many GPIO banks configured (max=%d)\n",
|
|
GPIO_MAX_BANK_NUM);
|
|
return -ENXIO;
|
|
}
|
|
kona_gpio->banks = devm_kcalloc(dev,
|
|
kona_gpio->num_bank,
|
|
sizeof(*kona_gpio->banks),
|
|
GFP_KERNEL);
|
|
if (!kona_gpio->banks)
|
|
return -ENOMEM;
|
|
|
|
kona_gpio->pdev = pdev;
|
|
platform_set_drvdata(pdev, kona_gpio);
|
|
chip->of_node = dev->of_node;
|
|
chip->ngpio = kona_gpio->num_bank * GPIO_PER_BANK;
|
|
|
|
kona_gpio->irq_domain = irq_domain_add_linear(dev->of_node,
|
|
chip->ngpio,
|
|
&bcm_kona_irq_ops,
|
|
kona_gpio);
|
|
if (!kona_gpio->irq_domain) {
|
|
dev_err(dev, "Couldn't allocate IRQ domain\n");
|
|
return -ENXIO;
|
|
}
|
|
|
|
res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
|
|
kona_gpio->reg_base = devm_ioremap_resource(dev, res);
|
|
if (IS_ERR(kona_gpio->reg_base)) {
|
|
ret = -ENXIO;
|
|
goto err_irq_domain;
|
|
}
|
|
|
|
for (i = 0; i < kona_gpio->num_bank; i++) {
|
|
bank = &kona_gpio->banks[i];
|
|
bank->id = i;
|
|
bank->irq = platform_get_irq(pdev, i);
|
|
bank->kona_gpio = kona_gpio;
|
|
if (bank->irq < 0) {
|
|
dev_err(dev, "Couldn't get IRQ for bank %d", i);
|
|
ret = -ENOENT;
|
|
goto err_irq_domain;
|
|
}
|
|
}
|
|
|
|
dev_info(&pdev->dev, "Setting up Kona GPIO\n");
|
|
|
|
bcm_kona_gpio_reset(kona_gpio);
|
|
|
|
ret = devm_gpiochip_add_data(dev, chip, kona_gpio);
|
|
if (ret < 0) {
|
|
dev_err(dev, "Couldn't add GPIO chip -- %d\n", ret);
|
|
goto err_irq_domain;
|
|
}
|
|
for (i = 0; i < kona_gpio->num_bank; i++) {
|
|
bank = &kona_gpio->banks[i];
|
|
irq_set_chained_handler_and_data(bank->irq,
|
|
bcm_kona_gpio_irq_handler,
|
|
bank);
|
|
}
|
|
|
|
raw_spin_lock_init(&kona_gpio->lock);
|
|
|
|
return 0;
|
|
|
|
err_irq_domain:
|
|
irq_domain_remove(kona_gpio->irq_domain);
|
|
|
|
return ret;
|
|
}
|
|
|
|
static struct platform_driver bcm_kona_gpio_driver = {
|
|
.driver = {
|
|
.name = "bcm-kona-gpio",
|
|
.of_match_table = bcm_kona_gpio_of_match,
|
|
},
|
|
.probe = bcm_kona_gpio_probe,
|
|
};
|
|
builtin_platform_driver(bcm_kona_gpio_driver);
|