119 lines
3.1 KiB
C
119 lines
3.1 KiB
C
#include <linux/device.h>
|
|
#include <linux/kernel.h>
|
|
#include <linux/module.h>
|
|
#include <linux/mcb.h>
|
|
#include <linux/serial.h>
|
|
#include <linux/serial_core.h>
|
|
#include <linux/serial_8250.h>
|
|
#include <uapi/linux/serial_core.h>
|
|
|
|
struct serial_8250_men_mcb_data {
|
|
struct uart_8250_port uart;
|
|
int line;
|
|
};
|
|
|
|
/*
|
|
* The Z125 16550-compatible UART has no fixed base clock assigned
|
|
* So, depending on the board we're on, we need to adjust the
|
|
* parameter in order to really set the correct baudrate, and
|
|
* do so if possible without user interaction
|
|
*/
|
|
static u32 men_z125_lookup_uartclk(struct mcb_device *mdev)
|
|
{
|
|
/* use default value if board is not available below */
|
|
u32 clkval = 1041666;
|
|
|
|
dev_info(&mdev->dev, "%s on board %s\n",
|
|
dev_name(&mdev->dev),
|
|
mdev->bus->name);
|
|
if (strncmp(mdev->bus->name, "F075", 4) == 0)
|
|
clkval = 1041666;
|
|
else if (strncmp(mdev->bus->name, "F216", 4) == 0)
|
|
clkval = 1843200;
|
|
else if (strncmp(mdev->bus->name, "G215", 4) == 0)
|
|
clkval = 1843200;
|
|
else
|
|
dev_info(&mdev->dev,
|
|
"board not detected, using default uartclk\n");
|
|
|
|
clkval = clkval << 4;
|
|
|
|
return clkval;
|
|
}
|
|
|
|
static int serial_8250_men_mcb_probe(struct mcb_device *mdev,
|
|
const struct mcb_device_id *id)
|
|
{
|
|
struct serial_8250_men_mcb_data *data;
|
|
struct resource *mem;
|
|
|
|
data = devm_kzalloc(&mdev->dev,
|
|
sizeof(struct serial_8250_men_mcb_data),
|
|
GFP_KERNEL);
|
|
if (!data)
|
|
return -ENOMEM;
|
|
|
|
mcb_set_drvdata(mdev, data);
|
|
data->uart.port.dev = mdev->dma_dev;
|
|
spin_lock_init(&data->uart.port.lock);
|
|
|
|
data->uart.port.type = PORT_16550;
|
|
data->uart.port.flags = UPF_SKIP_TEST | UPF_SHARE_IRQ | UPF_FIXED_TYPE;
|
|
data->uart.port.iotype = UPIO_MEM;
|
|
data->uart.port.uartclk = men_z125_lookup_uartclk(mdev);
|
|
data->uart.port.regshift = 0;
|
|
data->uart.port.fifosize = 60;
|
|
|
|
mem = mcb_get_resource(mdev, IORESOURCE_MEM);
|
|
if (mem == NULL)
|
|
return -ENXIO;
|
|
|
|
data->uart.port.irq = mcb_get_irq(mdev);
|
|
|
|
data->uart.port.membase = devm_ioremap_resource(&mdev->dev, mem);
|
|
if (IS_ERR(data->uart.port.membase))
|
|
return PTR_ERR_OR_ZERO(data->uart.port.membase);
|
|
|
|
data->uart.port.mapbase = (unsigned long) mem->start;
|
|
data->uart.port.iobase = data->uart.port.mapbase;
|
|
|
|
/* ok, register the port */
|
|
data->line = serial8250_register_8250_port(&data->uart);
|
|
if (data->line < 0)
|
|
return data->line;
|
|
|
|
dev_info(&mdev->dev, "found 16Z125 UART: ttyS%d\n", data->line);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static void serial_8250_men_mcb_remove(struct mcb_device *mdev)
|
|
{
|
|
struct serial_8250_men_mcb_data *data = mcb_get_drvdata(mdev);
|
|
|
|
if (data)
|
|
serial8250_unregister_port(data->line);
|
|
}
|
|
|
|
static const struct mcb_device_id serial_8250_men_mcb_ids[] = {
|
|
{ .device = 0x7d },
|
|
{ }
|
|
};
|
|
MODULE_DEVICE_TABLE(mcb, serial_8250_men_mcb_ids);
|
|
|
|
static struct mcb_driver mcb_driver = {
|
|
.driver = {
|
|
.name = "8250_men_mcb",
|
|
.owner = THIS_MODULE,
|
|
},
|
|
.probe = serial_8250_men_mcb_probe,
|
|
.remove = serial_8250_men_mcb_remove,
|
|
.id_table = serial_8250_men_mcb_ids,
|
|
};
|
|
module_mcb_driver(mcb_driver);
|
|
|
|
MODULE_LICENSE("GPL v2");
|
|
MODULE_DESCRIPTION("MEN 16z125 8250 UART driver");
|
|
MODULE_AUTHOR("Michael Moese <michael.moese@men.de");
|
|
MODULE_ALIAS("mcb:16z125");
|