Zhang Changzhong 0ae18a8268 can: j1939: add rxtimer for multipacket broadcast session ... According to SAE J1939/21 (Chapter 5.12.3 and APPENDIX C), for transmit side the required time interval between packets of a multipacket broadcast message is 50 to 200 ms, the responder shall use a timeout of 250ms (provides margin allowing for the maximumm spacing of 200ms). For receive side a timeout will occur when a time of greater than 750 ms elapsed between two message packets when more packets were expected. So this patch fix and add rxtimer for multipacket broadcast session. Fixes: 9d71dd0c70 ("can: add support of SAE J1939 protocol") Signed-off-by: Zhang Changzhong <zhangchangzhong@huawei.com> Link: https://lore.kernel.org/r/1596599425-5534-5-git-send-email-zhangchangzhong@huawei.com Acked-by: Oleksij Rempel <o.rempel@pengutronix.de> Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>		2020-08-15 11:12:58 +02:00
..
Kconfig	can: add support of SAE J1939 protocol	2019-09-04 14:22:33 +02:00
Makefile	can: add support of SAE J1939 protocol	2019-09-04 14:22:33 +02:00
address-claim.c	can: add support of SAE J1939 protocol	2019-09-04 14:22:33 +02:00
bus.c	can: add support of SAE J1939 protocol	2019-09-04 14:22:33 +02:00
j1939-priv.h	can: add support of SAE J1939 protocol	2019-09-04 14:22:33 +02:00
main.c	can: j1939: warn if resources are still linked on destroy	2019-11-13 10:42:34 +01:00
socket.c	can: j1939: socket: j1939_sk_bind(): make sure ml_priv is allocated	2020-08-14 12:38:47 +02:00
transport.c	can: j1939: add rxtimer for multipacket broadcast session	2020-08-15 11:12:58 +02:00