OpenCloudOS-Kernel/drivers/net/wireless/ath5k/reset.c

921 lines
24 KiB
C

/*
* Copyright (c) 2004-2008 Reyk Floeter <reyk@openbsd.org>
* Copyright (c) 2006-2008 Nick Kossifidis <mickflemm@gmail.com>
* Copyright (c) 2007-2008 Luis Rodriguez <mcgrof@winlab.rutgers.edu>
* Copyright (c) 2007-2008 Pavel Roskin <proski@gnu.org>
* Copyright (c) 2007-2008 Jiri Slaby <jirislaby@gmail.com>
*
* Permission to use, copy, modify, and distribute this software for any
* purpose with or without fee is hereby granted, provided that the above
* copyright notice and this permission notice appear in all copies.
*
* THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES
* WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF
* MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR
* ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES
* WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN
* ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF
* OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE.
*
*/
#define _ATH5K_RESET
/*****************************\
Reset functions and helpers
\*****************************/
#include <linux/pci.h>
#include "ath5k.h"
#include "reg.h"
#include "base.h"
#include "debug.h"
/**
* ath5k_hw_write_ofdm_timings - set OFDM timings on AR5212
*
* @ah: the &struct ath5k_hw
* @channel: the currently set channel upon reset
*
* Write the OFDM timings for the AR5212 upon reset. This is a helper for
* ath5k_hw_reset(). This seems to tune the PLL a specified frequency
* depending on the bandwidth of the channel.
*
*/
static inline int ath5k_hw_write_ofdm_timings(struct ath5k_hw *ah,
struct ieee80211_channel *channel)
{
/* Get exponent and mantissa and set it */
u32 coef_scaled, coef_exp, coef_man,
ds_coef_exp, ds_coef_man, clock;
if (!(ah->ah_version == AR5K_AR5212) ||
!(channel->hw_value & CHANNEL_OFDM))
BUG();
/* Seems there are two PLLs, one for baseband sampling and one
* for tuning. Tuning basebands are 40 MHz or 80MHz when in
* turbo. */
clock = channel->hw_value & CHANNEL_TURBO ? 80 : 40;
coef_scaled = ((5 * (clock << 24)) / 2) /
channel->center_freq;
for (coef_exp = 31; coef_exp > 0; coef_exp--)
if ((coef_scaled >> coef_exp) & 0x1)
break;
if (!coef_exp)
return -EINVAL;
coef_exp = 14 - (coef_exp - 24);
coef_man = coef_scaled +
(1 << (24 - coef_exp - 1));
ds_coef_man = coef_man >> (24 - coef_exp);
ds_coef_exp = coef_exp - 16;
AR5K_REG_WRITE_BITS(ah, AR5K_PHY_TIMING_3,
AR5K_PHY_TIMING_3_DSC_MAN, ds_coef_man);
AR5K_REG_WRITE_BITS(ah, AR5K_PHY_TIMING_3,
AR5K_PHY_TIMING_3_DSC_EXP, ds_coef_exp);
return 0;
}
/*
* index into rates for control rates, we can set it up like this because
* this is only used for AR5212 and we know it supports G mode
*/
static int control_rates[] =
{ 0, 1, 1, 1, 4, 4, 6, 6, 8, 8, 8, 8 };
/**
* ath5k_hw_write_rate_duration - set rate duration during hw resets
*
* @ah: the &struct ath5k_hw
* @mode: one of enum ath5k_driver_mode
*
* Write the rate duration table upon hw reset. This is a helper for
* ath5k_hw_reset(). It seems all this is doing is setting an ACK timeout for
* the hardware for the current mode for each rate. The rates which are capable
* of short preamble (802.11b rates 2Mbps, 5.5Mbps, and 11Mbps) have another
* register for the short preamble ACK timeout calculation.
*/
static inline void ath5k_hw_write_rate_duration(struct ath5k_hw *ah,
unsigned int mode)
{
struct ath5k_softc *sc = ah->ah_sc;
struct ieee80211_rate *rate;
unsigned int i;
/* Write rate duration table */
for (i = 0; i < sc->sbands[IEEE80211_BAND_2GHZ].n_bitrates; i++) {
u32 reg;
u16 tx_time;
rate = &sc->sbands[IEEE80211_BAND_2GHZ].bitrates[control_rates[i]];
/* Set ACK timeout */
reg = AR5K_RATE_DUR(rate->hw_value);
/* An ACK frame consists of 10 bytes. If you add the FCS,
* which ieee80211_generic_frame_duration() adds,
* its 14 bytes. Note we use the control rate and not the
* actual rate for this rate. See mac80211 tx.c
* ieee80211_duration() for a brief description of
* what rate we should choose to TX ACKs. */
tx_time = le16_to_cpu(ieee80211_generic_frame_duration(sc->hw,
sc->vif, 10, rate));
ath5k_hw_reg_write(ah, tx_time, reg);
if (!(rate->flags & IEEE80211_RATE_SHORT_PREAMBLE))
continue;
/*
* We're not distinguishing short preamble here,
* This is true, all we'll get is a longer value here
* which is not necessarilly bad. We could use
* export ieee80211_frame_duration() but that needs to be
* fixed first to be properly used by mac802111 drivers:
*
* - remove erp stuff and let the routine figure ofdm
* erp rates
* - remove passing argument ieee80211_local as
* drivers don't have access to it
* - move drivers using ieee80211_generic_frame_duration()
* to this
*/
ath5k_hw_reg_write(ah, tx_time,
reg + (AR5K_SET_SHORT_PREAMBLE << 2));
}
}
/*
* Reset chipset
*/
static int ath5k_hw_nic_reset(struct ath5k_hw *ah, u32 val)
{
int ret;
u32 mask = val ? val : ~0U;
ATH5K_TRACE(ah->ah_sc);
/* Read-and-clear RX Descriptor Pointer*/
ath5k_hw_reg_read(ah, AR5K_RXDP);
/*
* Reset the device and wait until success
*/
ath5k_hw_reg_write(ah, val, AR5K_RESET_CTL);
/* Wait at least 128 PCI clocks */
udelay(15);
if (ah->ah_version == AR5K_AR5210) {
val &= AR5K_RESET_CTL_PCU | AR5K_RESET_CTL_DMA
| AR5K_RESET_CTL_MAC | AR5K_RESET_CTL_PHY;
mask &= AR5K_RESET_CTL_PCU | AR5K_RESET_CTL_DMA
| AR5K_RESET_CTL_MAC | AR5K_RESET_CTL_PHY;
} else {
val &= AR5K_RESET_CTL_PCU | AR5K_RESET_CTL_BASEBAND;
mask &= AR5K_RESET_CTL_PCU | AR5K_RESET_CTL_BASEBAND;
}
ret = ath5k_hw_register_timeout(ah, AR5K_RESET_CTL, mask, val, false);
/*
* Reset configuration register (for hw byte-swap). Note that this
* is only set for big endian. We do the necessary magic in
* AR5K_INIT_CFG.
*/
if ((val & AR5K_RESET_CTL_PCU) == 0)
ath5k_hw_reg_write(ah, AR5K_INIT_CFG, AR5K_CFG);
return ret;
}
/*
* Sleep control
*/
int ath5k_hw_set_power(struct ath5k_hw *ah, enum ath5k_power_mode mode,
bool set_chip, u16 sleep_duration)
{
unsigned int i;
u32 staid, data;
ATH5K_TRACE(ah->ah_sc);
staid = ath5k_hw_reg_read(ah, AR5K_STA_ID1);
switch (mode) {
case AR5K_PM_AUTO:
staid &= ~AR5K_STA_ID1_DEFAULT_ANTENNA;
/* fallthrough */
case AR5K_PM_NETWORK_SLEEP:
if (set_chip)
ath5k_hw_reg_write(ah,
AR5K_SLEEP_CTL_SLE_ALLOW |
sleep_duration,
AR5K_SLEEP_CTL);
staid |= AR5K_STA_ID1_PWR_SV;
break;
case AR5K_PM_FULL_SLEEP:
if (set_chip)
ath5k_hw_reg_write(ah, AR5K_SLEEP_CTL_SLE_SLP,
AR5K_SLEEP_CTL);
staid |= AR5K_STA_ID1_PWR_SV;
break;
case AR5K_PM_AWAKE:
staid &= ~AR5K_STA_ID1_PWR_SV;
if (!set_chip)
goto commit;
/* Preserve sleep duration */
data = ath5k_hw_reg_read(ah, AR5K_SLEEP_CTL);
if (data & 0xffc00000)
data = 0;
else
data = data & 0xfffcffff;
ath5k_hw_reg_write(ah, data, AR5K_SLEEP_CTL);
udelay(15);
for (i = 50; i > 0; i--) {
/* Check if the chip did wake up */
if ((ath5k_hw_reg_read(ah, AR5K_PCICFG) &
AR5K_PCICFG_SPWR_DN) == 0)
break;
/* Wait a bit and retry */
udelay(200);
ath5k_hw_reg_write(ah, data, AR5K_SLEEP_CTL);
}
/* Fail if the chip didn't wake up */
if (i <= 0)
return -EIO;
break;
default:
return -EINVAL;
}
commit:
ah->ah_power_mode = mode;
ath5k_hw_reg_write(ah, staid, AR5K_STA_ID1);
return 0;
}
/*
* Bring up MAC + PHY Chips
*/
int ath5k_hw_nic_wakeup(struct ath5k_hw *ah, int flags, bool initial)
{
struct pci_dev *pdev = ah->ah_sc->pdev;
u32 turbo, mode, clock, bus_flags;
int ret;
turbo = 0;
mode = 0;
clock = 0;
ATH5K_TRACE(ah->ah_sc);
/* Wakeup the device */
ret = ath5k_hw_set_power(ah, AR5K_PM_AWAKE, true, 0);
if (ret) {
ATH5K_ERR(ah->ah_sc, "failed to wakeup the MAC Chip\n");
return ret;
}
if (ah->ah_version != AR5K_AR5210) {
/*
* Get channel mode flags
*/
if (ah->ah_radio >= AR5K_RF5112) {
mode = AR5K_PHY_MODE_RAD_RF5112;
clock = AR5K_PHY_PLL_RF5112;
} else {
mode = AR5K_PHY_MODE_RAD_RF5111; /*Zero*/
clock = AR5K_PHY_PLL_RF5111; /*Zero*/
}
if (flags & CHANNEL_2GHZ) {
mode |= AR5K_PHY_MODE_FREQ_2GHZ;
clock |= AR5K_PHY_PLL_44MHZ;
if (flags & CHANNEL_CCK) {
mode |= AR5K_PHY_MODE_MOD_CCK;
} else if (flags & CHANNEL_OFDM) {
/* XXX Dynamic OFDM/CCK is not supported by the
* AR5211 so we set MOD_OFDM for plain g (no
* CCK headers) operation. We need to test
* this, 5211 might support ofdm-only g after
* all, there are also initial register values
* in the code for g mode (see initvals.c). */
if (ah->ah_version == AR5K_AR5211)
mode |= AR5K_PHY_MODE_MOD_OFDM;
else
mode |= AR5K_PHY_MODE_MOD_DYN;
} else {
ATH5K_ERR(ah->ah_sc,
"invalid radio modulation mode\n");
return -EINVAL;
}
} else if (flags & CHANNEL_5GHZ) {
mode |= AR5K_PHY_MODE_FREQ_5GHZ;
clock |= AR5K_PHY_PLL_40MHZ;
if (flags & CHANNEL_OFDM)
mode |= AR5K_PHY_MODE_MOD_OFDM;
else {
ATH5K_ERR(ah->ah_sc,
"invalid radio modulation mode\n");
return -EINVAL;
}
} else {
ATH5K_ERR(ah->ah_sc, "invalid radio frequency mode\n");
return -EINVAL;
}
if (flags & CHANNEL_TURBO)
turbo = AR5K_PHY_TURBO_MODE | AR5K_PHY_TURBO_SHORT;
} else { /* Reset the device */
/* ...enable Atheros turbo mode if requested */
if (flags & CHANNEL_TURBO)
ath5k_hw_reg_write(ah, AR5K_PHY_TURBO_MODE,
AR5K_PHY_TURBO);
}
/* reseting PCI on PCI-E cards results card to hang
* and always return 0xffff... so we ingore that flag
* for PCI-E cards */
bus_flags = (pdev->is_pcie) ? 0 : AR5K_RESET_CTL_PCI;
/* Reset chipset */
if (ah->ah_version == AR5K_AR5210) {
ret = ath5k_hw_nic_reset(ah, AR5K_RESET_CTL_PCU |
AR5K_RESET_CTL_MAC | AR5K_RESET_CTL_DMA |
AR5K_RESET_CTL_PHY | AR5K_RESET_CTL_PCI);
mdelay(2);
} else {
ret = ath5k_hw_nic_reset(ah, AR5K_RESET_CTL_PCU |
AR5K_RESET_CTL_BASEBAND | bus_flags);
}
if (ret) {
ATH5K_ERR(ah->ah_sc, "failed to reset the MAC Chip\n");
return -EIO;
}
/* ...wakeup again!*/
ret = ath5k_hw_set_power(ah, AR5K_PM_AWAKE, true, 0);
if (ret) {
ATH5K_ERR(ah->ah_sc, "failed to resume the MAC Chip\n");
return ret;
}
/* ...final warm reset */
if (ath5k_hw_nic_reset(ah, 0)) {
ATH5K_ERR(ah->ah_sc, "failed to warm reset the MAC Chip\n");
return -EIO;
}
if (ah->ah_version != AR5K_AR5210) {
/* ...set the PHY operating mode */
ath5k_hw_reg_write(ah, clock, AR5K_PHY_PLL);
udelay(300);
ath5k_hw_reg_write(ah, mode, AR5K_PHY_MODE);
ath5k_hw_reg_write(ah, turbo, AR5K_PHY_TURBO);
}
return 0;
}
/*
* Main reset function
*/
int ath5k_hw_reset(struct ath5k_hw *ah, enum nl80211_iftype op_mode,
struct ieee80211_channel *channel, bool change_channel)
{
struct ath5k_eeprom_info *ee = &ah->ah_capabilities.cap_eeprom;
struct pci_dev *pdev = ah->ah_sc->pdev;
u32 data, s_seq, s_ant, s_led[3], dma_size;
unsigned int i, mode, freq, ee_mode, ant[2];
int ret;
ATH5K_TRACE(ah->ah_sc);
s_seq = 0;
s_ant = 0;
ee_mode = 0;
freq = 0;
mode = 0;
/*
* Save some registers before a reset
*/
/*DCU/Antenna selection not available on 5210*/
if (ah->ah_version != AR5K_AR5210) {
if (change_channel) {
/* Seq number for queue 0 -do this for all queues ? */
s_seq = ath5k_hw_reg_read(ah,
AR5K_QUEUE_DFS_SEQNUM(0));
/*Default antenna*/
s_ant = ath5k_hw_reg_read(ah, AR5K_DEFAULT_ANTENNA);
}
}
/*GPIOs*/
s_led[0] = ath5k_hw_reg_read(ah, AR5K_PCICFG) & AR5K_PCICFG_LEDSTATE;
s_led[1] = ath5k_hw_reg_read(ah, AR5K_GPIOCR);
s_led[2] = ath5k_hw_reg_read(ah, AR5K_GPIODO);
if (change_channel && ah->ah_rf_banks != NULL)
ath5k_hw_get_rf_gain(ah);
/*Wakeup the device*/
ret = ath5k_hw_nic_wakeup(ah, channel->hw_value, false);
if (ret)
return ret;
/*
* Initialize operating mode
*/
ah->ah_op_mode = op_mode;
/*
* 5111/5112 Settings
* 5210 only comes with RF5110
*/
if (ah->ah_version != AR5K_AR5210) {
if (ah->ah_radio != AR5K_RF5111 &&
ah->ah_radio != AR5K_RF5112 &&
ah->ah_radio != AR5K_RF5413 &&
ah->ah_radio != AR5K_RF2413 &&
ah->ah_radio != AR5K_RF2425) {
ATH5K_ERR(ah->ah_sc,
"invalid phy radio: %u\n", ah->ah_radio);
return -EINVAL;
}
switch (channel->hw_value & CHANNEL_MODES) {
case CHANNEL_A:
mode = AR5K_MODE_11A;
freq = AR5K_INI_RFGAIN_5GHZ;
ee_mode = AR5K_EEPROM_MODE_11A;
break;
case CHANNEL_G:
mode = AR5K_MODE_11G;
freq = AR5K_INI_RFGAIN_2GHZ;
ee_mode = AR5K_EEPROM_MODE_11G;
break;
case CHANNEL_B:
mode = AR5K_MODE_11B;
freq = AR5K_INI_RFGAIN_2GHZ;
ee_mode = AR5K_EEPROM_MODE_11B;
break;
case CHANNEL_T:
mode = AR5K_MODE_11A_TURBO;
freq = AR5K_INI_RFGAIN_5GHZ;
ee_mode = AR5K_EEPROM_MODE_11A;
break;
/*Is this ok on 5211 too ?*/
case CHANNEL_TG:
mode = AR5K_MODE_11G_TURBO;
freq = AR5K_INI_RFGAIN_2GHZ;
ee_mode = AR5K_EEPROM_MODE_11G;
break;
case CHANNEL_XR:
if (ah->ah_version == AR5K_AR5211) {
ATH5K_ERR(ah->ah_sc,
"XR mode not available on 5211");
return -EINVAL;
}
mode = AR5K_MODE_XR;
freq = AR5K_INI_RFGAIN_5GHZ;
ee_mode = AR5K_EEPROM_MODE_11A;
break;
default:
ATH5K_ERR(ah->ah_sc,
"invalid channel: %d\n", channel->center_freq);
return -EINVAL;
}
/* PHY access enable */
ath5k_hw_reg_write(ah, AR5K_PHY_SHIFT_5GHZ, AR5K_PHY(0));
}
ret = ath5k_hw_write_initvals(ah, mode, change_channel);
if (ret)
return ret;
/*
* 5211/5212 Specific
*/
if (ah->ah_version != AR5K_AR5210) {
/*
* Write initial RF gain settings
* This should work for both 5111/5112
*/
ret = ath5k_hw_rfgain(ah, freq);
if (ret)
return ret;
mdelay(1);
/*
* Write some more initial register settings for revised chips
*/
if (ah->ah_version == AR5K_AR5212 &&
ah->ah_phy_revision > 0x41) {
ath5k_hw_reg_write(ah, 0x0002a002, 0x982c);
if (channel->hw_value == CHANNEL_G)
if (ah->ah_mac_srev < AR5K_SREV_AR2413)
ath5k_hw_reg_write(ah, 0x00f80d80,
0x994c);
else if (ah->ah_mac_srev < AR5K_SREV_AR5424)
ath5k_hw_reg_write(ah, 0x00380140,
0x994c);
else if (ah->ah_mac_srev < AR5K_SREV_AR2425)
ath5k_hw_reg_write(ah, 0x00fc0ec0,
0x994c);
else /* 2425 */
ath5k_hw_reg_write(ah, 0x00fc0fc0,
0x994c);
else
ath5k_hw_reg_write(ah, 0x00000000, 0x994c);
/* Got this from legacy-hal */
AR5K_REG_DISABLE_BITS(ah, 0xa228, 0x200);
AR5K_REG_MASKED_BITS(ah, 0xa228, 0x800, 0xfffe03ff);
/* Just write 0x9b5 ? */
/* ath5k_hw_reg_write(ah, 0x000009b5, 0xa228); */
ath5k_hw_reg_write(ah, 0x0000000f, AR5K_SEQ_MASK);
ath5k_hw_reg_write(ah, 0x00000000, 0xa254);
ath5k_hw_reg_write(ah, 0x0000000e, AR5K_PHY_SCAL);
}
/* Fix for first revision of the RF5112 RF chipset */
if (ah->ah_radio >= AR5K_RF5112 &&
ah->ah_radio_5ghz_revision <
AR5K_SREV_RAD_5112A) {
ath5k_hw_reg_write(ah, AR5K_PHY_CCKTXCTL_WORLD,
AR5K_PHY_CCKTXCTL);
if (channel->hw_value & CHANNEL_5GHZ)
data = 0xffb81020;
else
data = 0xffb80d20;
ath5k_hw_reg_write(ah, data, AR5K_PHY_FRAME_CTL);
data = 0;
}
/*
* Set TX power (FIXME)
*/
ret = ath5k_hw_txpower(ah, channel, AR5K_TUNE_DEFAULT_TXPOWER);
if (ret)
return ret;
/* Write rate duration table only on AR5212 and if
* virtual interface has already been brought up
* XXX: rethink this after new mode changes to
* mac80211 are integrated */
if (ah->ah_version == AR5K_AR5212 &&
ah->ah_sc->vif != NULL)
ath5k_hw_write_rate_duration(ah, mode);
/*
* Write RF registers
*/
ret = ath5k_hw_rfregs(ah, channel, mode);
if (ret)
return ret;
/*
* Configure additional registers
*/
/* Write OFDM timings on 5212*/
if (ah->ah_version == AR5K_AR5212 &&
channel->hw_value & CHANNEL_OFDM) {
ret = ath5k_hw_write_ofdm_timings(ah, channel);
if (ret)
return ret;
}
/*Enable/disable 802.11b mode on 5111
(enable 2111 frequency converter + CCK)*/
if (ah->ah_radio == AR5K_RF5111) {
if (mode == AR5K_MODE_11B)
AR5K_REG_ENABLE_BITS(ah, AR5K_TXCFG,
AR5K_TXCFG_B_MODE);
else
AR5K_REG_DISABLE_BITS(ah, AR5K_TXCFG,
AR5K_TXCFG_B_MODE);
}
/*
* Set channel and calibrate the PHY
*/
ret = ath5k_hw_channel(ah, channel);
if (ret)
return ret;
/* Set antenna mode */
AR5K_REG_MASKED_BITS(ah, AR5K_PHY_ANT_CTL,
ah->ah_antenna[ee_mode][0], 0xfffffc06);
/*
* In case a fixed antenna was set as default
* write the same settings on both AR5K_PHY_ANT_SWITCH_TABLE
* registers.
*/
if (s_ant != 0) {
if (s_ant == AR5K_ANT_FIXED_A) /* 1 - Main */
ant[0] = ant[1] = AR5K_ANT_FIXED_A;
else /* 2 - Aux */
ant[0] = ant[1] = AR5K_ANT_FIXED_B;
} else {
ant[0] = AR5K_ANT_FIXED_A;
ant[1] = AR5K_ANT_FIXED_B;
}
ath5k_hw_reg_write(ah, ah->ah_antenna[ee_mode][ant[0]],
AR5K_PHY_ANT_SWITCH_TABLE_0);
ath5k_hw_reg_write(ah, ah->ah_antenna[ee_mode][ant[1]],
AR5K_PHY_ANT_SWITCH_TABLE_1);
/* Commit values from EEPROM */
if (ah->ah_radio == AR5K_RF5111)
AR5K_REG_WRITE_BITS(ah, AR5K_PHY_FRAME_CTL,
AR5K_PHY_FRAME_CTL_TX_CLIP, ee->ee_tx_clip);
ath5k_hw_reg_write(ah,
AR5K_PHY_NF_SVAL(ee->ee_noise_floor_thr[ee_mode]),
AR5K_PHY_NFTHRES);
AR5K_REG_MASKED_BITS(ah, AR5K_PHY_SETTLING,
(ee->ee_switch_settling[ee_mode] << 7) & 0x3f80,
0xffffc07f);
AR5K_REG_MASKED_BITS(ah, AR5K_PHY_GAIN,
(ee->ee_ant_tx_rx[ee_mode] << 12) & 0x3f000,
0xfffc0fff);
AR5K_REG_MASKED_BITS(ah, AR5K_PHY_DESIRED_SIZE,
(ee->ee_adc_desired_size[ee_mode] & 0x00ff) |
((ee->ee_pga_desired_size[ee_mode] << 8) & 0xff00),
0xffff0000);
ath5k_hw_reg_write(ah,
(ee->ee_tx_end2xpa_disable[ee_mode] << 24) |
(ee->ee_tx_end2xpa_disable[ee_mode] << 16) |
(ee->ee_tx_frm2xpa_enable[ee_mode] << 8) |
(ee->ee_tx_frm2xpa_enable[ee_mode]), AR5K_PHY_RF_CTL4);
AR5K_REG_MASKED_BITS(ah, AR5K_PHY_RF_CTL3,
ee->ee_tx_end2xlna_enable[ee_mode] << 8, 0xffff00ff);
AR5K_REG_MASKED_BITS(ah, AR5K_PHY_NF,
(ee->ee_thr_62[ee_mode] << 12) & 0x7f000, 0xfff80fff);
AR5K_REG_MASKED_BITS(ah, AR5K_PHY_OFDM_SELFCORR, 4, 0xffffff01);
AR5K_REG_ENABLE_BITS(ah, AR5K_PHY_IQ,
AR5K_PHY_IQ_CORR_ENABLE |
(ee->ee_i_cal[ee_mode] << AR5K_PHY_IQ_CORR_Q_I_COFF_S) |
ee->ee_q_cal[ee_mode]);
if (ah->ah_ee_version >= AR5K_EEPROM_VERSION_4_1)
AR5K_REG_WRITE_BITS(ah, AR5K_PHY_GAIN_2GHZ,
AR5K_PHY_GAIN_2GHZ_MARGIN_TXRX,
ee->ee_margin_tx_rx[ee_mode]);
} else {
mdelay(1);
/* Disable phy and wait */
ath5k_hw_reg_write(ah, AR5K_PHY_ACT_DISABLE, AR5K_PHY_ACT);
mdelay(1);
}
/*
* Restore saved values
*/
/*DCU/Antenna selection not available on 5210*/
if (ah->ah_version != AR5K_AR5210) {
ath5k_hw_reg_write(ah, s_seq, AR5K_QUEUE_DFS_SEQNUM(0));
ath5k_hw_reg_write(ah, s_ant, AR5K_DEFAULT_ANTENNA);
}
AR5K_REG_ENABLE_BITS(ah, AR5K_PCICFG, s_led[0]);
ath5k_hw_reg_write(ah, s_led[1], AR5K_GPIOCR);
ath5k_hw_reg_write(ah, s_led[2], AR5K_GPIODO);
/*
* Misc
*/
/* XXX: add ah->aid once mac80211 gives this to us */
ath5k_hw_set_associd(ah, ah->ah_bssid, 0);
ath5k_hw_set_opmode(ah);
/*PISR/SISR Not available on 5210*/
if (ah->ah_version != AR5K_AR5210) {
ath5k_hw_reg_write(ah, 0xffffffff, AR5K_PISR);
/* If we later allow tuning for this, store into sc structure */
data = AR5K_TUNE_RSSI_THRES |
AR5K_TUNE_BMISS_THRES << AR5K_RSSI_THR_BMISS_S;
ath5k_hw_reg_write(ah, data, AR5K_RSSI_THR);
}
/*
* Set Rx/Tx DMA Configuration
*
* Set maximum DMA size (512) except for PCI-E cards since
* it causes rx overruns and tx errors (tested on 5424 but since
* rx overruns also occur on 5416/5418 with madwifi we set 128
* for all PCI-E cards to be safe).
*
* In dumps this is 128 for allchips.
*
* XXX: need to check 5210 for this
* TODO: Check out tx triger level, it's always 64 on dumps but I
* guess we can tweak it and see how it goes ;-)
*/
dma_size = (pdev->is_pcie) ? AR5K_DMASIZE_128B : AR5K_DMASIZE_512B;
if (ah->ah_version != AR5K_AR5210) {
AR5K_REG_WRITE_BITS(ah, AR5K_TXCFG,
AR5K_TXCFG_SDMAMR, dma_size);
AR5K_REG_WRITE_BITS(ah, AR5K_RXCFG,
AR5K_RXCFG_SDMAMW, dma_size);
}
/*
* Enable the PHY and wait until completion
*/
ath5k_hw_reg_write(ah, AR5K_PHY_ACT_ENABLE, AR5K_PHY_ACT);
/*
* On 5211+ read activation -> rx delay
* and use it.
*/
if (ah->ah_version != AR5K_AR5210) {
data = ath5k_hw_reg_read(ah, AR5K_PHY_RX_DELAY) &
AR5K_PHY_RX_DELAY_M;
data = (channel->hw_value & CHANNEL_CCK) ?
((data << 2) / 22) : (data / 10);
udelay(100 + (2 * data));
data = 0;
} else {
mdelay(1);
}
/*
* Perform ADC test (?)
*/
data = ath5k_hw_reg_read(ah, AR5K_PHY_TST1);
ath5k_hw_reg_write(ah, AR5K_PHY_TST1_TXHOLD, AR5K_PHY_TST1);
for (i = 0; i <= 20; i++) {
if (!(ath5k_hw_reg_read(ah, AR5K_PHY_ADC_TEST) & 0x10))
break;
udelay(200);
}
ath5k_hw_reg_write(ah, data, AR5K_PHY_TST1);
data = 0;
/*
* Start automatic gain calibration
*
* During AGC calibration RX path is re-routed to
* a signal detector so we don't receive anything.
*
* This method is used to calibrate some static offsets
* used together with on-the fly I/Q calibration (the
* one performed via ath5k_hw_phy_calibrate), that doesn't
* interrupt rx path.
*
* If we are in a noisy environment AGC calibration may time
* out.
*/
AR5K_REG_ENABLE_BITS(ah, AR5K_PHY_AGCCTL,
AR5K_PHY_AGCCTL_CAL);
/* At the same time start I/Q calibration for QAM constellation
* -no need for CCK- */
ah->ah_calibration = false;
if (!(mode == AR5K_MODE_11B)) {
ah->ah_calibration = true;
AR5K_REG_WRITE_BITS(ah, AR5K_PHY_IQ,
AR5K_PHY_IQ_CAL_NUM_LOG_MAX, 15);
AR5K_REG_ENABLE_BITS(ah, AR5K_PHY_IQ,
AR5K_PHY_IQ_RUN);
}
/* Wait for gain calibration to finish (we check for I/Q calibration
* during ath5k_phy_calibrate) */
if (ath5k_hw_register_timeout(ah, AR5K_PHY_AGCCTL,
AR5K_PHY_AGCCTL_CAL, 0, false)) {
ATH5K_ERR(ah->ah_sc, "gain calibration timeout (%uMHz)\n",
channel->center_freq);
return -EAGAIN;
}
/*
* Start noise floor calibration
*
* If we run NF calibration before AGC, it always times out.
* Binary HAL starts NF and AGC calibration at the same time
* and only waits for AGC to finish. I believe that's wrong because
* during NF calibration, rx path is also routed to a detector, so if
* it doesn't finish we won't have RX.
*
* XXX: Find an interval that's OK for all cards...
*/
ath5k_hw_noise_floor_calibration(ah, channel->center_freq);
/*
* Reset queues and start beacon timers at the end of the reset routine
*/
for (i = 0; i < ah->ah_capabilities.cap_queues.q_tx_num; i++) {
/*No QCU on 5210*/
if (ah->ah_version != AR5K_AR5210)
AR5K_REG_WRITE_Q(ah, AR5K_QUEUE_QCUMASK(i), i);
ret = ath5k_hw_reset_tx_queue(ah, i);
if (ret) {
ATH5K_ERR(ah->ah_sc,
"failed to reset TX queue #%d\n", i);
return ret;
}
}
/* Pre-enable interrupts on 5211/5212*/
if (ah->ah_version != AR5K_AR5210)
ath5k_hw_set_imr(ah, ah->ah_imr);
/*
* Set RF kill flags if supported by the device (read from the EEPROM)
* Disable gpio_intr for now since it results system hang.
* TODO: Handle this in ath5k_intr
*/
#if 0
if (AR5K_EEPROM_HDR_RFKILL(ah->ah_capabilities.cap_eeprom.ee_header)) {
ath5k_hw_set_gpio_input(ah, 0);
ah->ah_gpio[0] = ath5k_hw_get_gpio(ah, 0);
if (ah->ah_gpio[0] == 0)
ath5k_hw_set_gpio_intr(ah, 0, 1);
else
ath5k_hw_set_gpio_intr(ah, 0, 0);
}
#endif
/*
* Set the 32MHz reference clock on 5212 phy clock sleep register
*
* TODO: Find out how to switch to external 32Khz clock to save power
*/
if (ah->ah_version == AR5K_AR5212) {
ath5k_hw_reg_write(ah, AR5K_PHY_SCR_32MHZ, AR5K_PHY_SCR);
ath5k_hw_reg_write(ah, AR5K_PHY_SLMT_32MHZ, AR5K_PHY_SLMT);
ath5k_hw_reg_write(ah, AR5K_PHY_SCAL_32MHZ, AR5K_PHY_SCAL);
ath5k_hw_reg_write(ah, AR5K_PHY_SCLOCK_32MHZ, AR5K_PHY_SCLOCK);
ath5k_hw_reg_write(ah, AR5K_PHY_SDELAY_32MHZ, AR5K_PHY_SDELAY);
ath5k_hw_reg_write(ah, ah->ah_phy_spending, AR5K_PHY_SPENDING);
data = ath5k_hw_reg_read(ah, AR5K_USEC_5211) & 0xffffc07f ;
data |= (ah->ah_phy_spending == AR5K_PHY_SPENDING_18) ?
0x00000f80 : 0x00001380 ;
ath5k_hw_reg_write(ah, data, AR5K_USEC_5211);
data = 0;
}
if (ah->ah_version == AR5K_AR5212) {
ath5k_hw_reg_write(ah, 0x000100aa, 0x8118);
ath5k_hw_reg_write(ah, 0x00003210, 0x811c);
ath5k_hw_reg_write(ah, 0x00000052, 0x8108);
if (ah->ah_mac_srev >= AR5K_SREV_AR2413)
ath5k_hw_reg_write(ah, 0x00000004, 0x8120);
}
/*
* Disable beacons and reset the register
*/
AR5K_REG_DISABLE_BITS(ah, AR5K_BEACON, AR5K_BEACON_ENABLE |
AR5K_BEACON_RESET_TSF);
return 0;
}
#undef _ATH5K_RESET