OpenCloudOS-Kernel/drivers/net/wireless/rt2x00/rt61pci.h

1493 lines
42 KiB
C

/*
Copyright (C) 2004 - 2009 rt2x00 SourceForge Project
<http://rt2x00.serialmonkey.com>
This program is free software; you can redistribute it and/or modify
it under the terms of the GNU General Public License as published by
the Free Software Foundation; either version 2 of the License, or
(at your option) any later version.
This program is distributed in the hope that it will be useful,
but WITHOUT ANY WARRANTY; without even the implied warranty of
MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
GNU General Public License for more details.
You should have received a copy of the GNU General Public License
along with this program; if not, write to the
Free Software Foundation, Inc.,
59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.
*/
/*
Module: rt61pci
Abstract: Data structures and registers for the rt61pci module.
Supported chipsets: RT2561, RT2561s, RT2661.
*/
#ifndef RT61PCI_H
#define RT61PCI_H
/*
* RF chip defines.
*/
#define RF5225 0x0001
#define RF5325 0x0002
#define RF2527 0x0003
#define RF2529 0x0004
/*
* Signal information.
* Defaul offset is required for RSSI <-> dBm conversion.
*/
#define DEFAULT_RSSI_OFFSET 120
/*
* Register layout information.
*/
#define CSR_REG_BASE 0x3000
#define CSR_REG_SIZE 0x04b0
#define EEPROM_BASE 0x0000
#define EEPROM_SIZE 0x0100
#define BBP_BASE 0x0000
#define BBP_SIZE 0x0080
#define RF_BASE 0x0004
#define RF_SIZE 0x0010
/*
* Number of TX queues.
*/
#define NUM_TX_QUEUES 4
/*
* PCI registers.
*/
/*
* HOST_CMD_CSR: For HOST to interrupt embedded processor
*/
#define HOST_CMD_CSR 0x0008
#define HOST_CMD_CSR_HOST_COMMAND FIELD32(0x0000007f)
#define HOST_CMD_CSR_INTERRUPT_MCU FIELD32(0x00000080)
/*
* MCU_CNTL_CSR
* SELECT_BANK: Select 8051 program bank.
* RESET: Enable 8051 reset state.
* READY: Ready state for 8051.
*/
#define MCU_CNTL_CSR 0x000c
#define MCU_CNTL_CSR_SELECT_BANK FIELD32(0x00000001)
#define MCU_CNTL_CSR_RESET FIELD32(0x00000002)
#define MCU_CNTL_CSR_READY FIELD32(0x00000004)
/*
* SOFT_RESET_CSR
* FORCE_CLOCK_ON: Host force MAC clock ON
*/
#define SOFT_RESET_CSR 0x0010
#define SOFT_RESET_CSR_FORCE_CLOCK_ON FIELD32(0x00000002)
/*
* MCU_INT_SOURCE_CSR: MCU interrupt source/mask register.
*/
#define MCU_INT_SOURCE_CSR 0x0014
#define MCU_INT_SOURCE_CSR_0 FIELD32(0x00000001)
#define MCU_INT_SOURCE_CSR_1 FIELD32(0x00000002)
#define MCU_INT_SOURCE_CSR_2 FIELD32(0x00000004)
#define MCU_INT_SOURCE_CSR_3 FIELD32(0x00000008)
#define MCU_INT_SOURCE_CSR_4 FIELD32(0x00000010)
#define MCU_INT_SOURCE_CSR_5 FIELD32(0x00000020)
#define MCU_INT_SOURCE_CSR_6 FIELD32(0x00000040)
#define MCU_INT_SOURCE_CSR_7 FIELD32(0x00000080)
#define MCU_INT_SOURCE_CSR_TWAKEUP FIELD32(0x00000100)
#define MCU_INT_SOURCE_CSR_TBTT_EXPIRE FIELD32(0x00000200)
/*
* MCU_INT_MASK_CSR: MCU interrupt source/mask register.
*/
#define MCU_INT_MASK_CSR 0x0018
#define MCU_INT_MASK_CSR_0 FIELD32(0x00000001)
#define MCU_INT_MASK_CSR_1 FIELD32(0x00000002)
#define MCU_INT_MASK_CSR_2 FIELD32(0x00000004)
#define MCU_INT_MASK_CSR_3 FIELD32(0x00000008)
#define MCU_INT_MASK_CSR_4 FIELD32(0x00000010)
#define MCU_INT_MASK_CSR_5 FIELD32(0x00000020)
#define MCU_INT_MASK_CSR_6 FIELD32(0x00000040)
#define MCU_INT_MASK_CSR_7 FIELD32(0x00000080)
#define MCU_INT_MASK_CSR_TWAKEUP FIELD32(0x00000100)
#define MCU_INT_MASK_CSR_TBTT_EXPIRE FIELD32(0x00000200)
/*
* PCI_USEC_CSR
*/
#define PCI_USEC_CSR 0x001c
/*
* Security key table memory.
* 16 entries 32-byte for shared key table
* 64 entries 32-byte for pairwise key table
* 64 entries 8-byte for pairwise ta key table
*/
#define SHARED_KEY_TABLE_BASE 0x1000
#define PAIRWISE_KEY_TABLE_BASE 0x1200
#define PAIRWISE_TA_TABLE_BASE 0x1a00
#define SHARED_KEY_ENTRY(__idx) \
( SHARED_KEY_TABLE_BASE + \
((__idx) * sizeof(struct hw_key_entry)) )
#define PAIRWISE_KEY_ENTRY(__idx) \
( PAIRWISE_KEY_TABLE_BASE + \
((__idx) * sizeof(struct hw_key_entry)) )
#define PAIRWISE_TA_ENTRY(__idx) \
( PAIRWISE_TA_TABLE_BASE + \
((__idx) * sizeof(struct hw_pairwise_ta_entry)) )
struct hw_key_entry {
u8 key[16];
u8 tx_mic[8];
u8 rx_mic[8];
} __attribute__ ((packed));
struct hw_pairwise_ta_entry {
u8 address[6];
u8 cipher;
u8 reserved;
} __attribute__ ((packed));
/*
* Other on-chip shared memory space.
*/
#define HW_CIS_BASE 0x2000
#define HW_NULL_BASE 0x2b00
/*
* Since NULL frame won't be that long (256 byte),
* We steal 16 tail bytes to save debugging settings.
*/
#define HW_DEBUG_SETTING_BASE 0x2bf0
/*
* On-chip BEACON frame space.
*/
#define HW_BEACON_BASE0 0x2c00
#define HW_BEACON_BASE1 0x2d00
#define HW_BEACON_BASE2 0x2e00
#define HW_BEACON_BASE3 0x2f00
#define HW_BEACON_OFFSET(__index) \
( HW_BEACON_BASE0 + (__index * 0x0100) )
/*
* HOST-MCU shared memory.
*/
/*
* H2M_MAILBOX_CSR: Host-to-MCU Mailbox.
*/
#define H2M_MAILBOX_CSR 0x2100
#define H2M_MAILBOX_CSR_ARG0 FIELD32(0x000000ff)
#define H2M_MAILBOX_CSR_ARG1 FIELD32(0x0000ff00)
#define H2M_MAILBOX_CSR_CMD_TOKEN FIELD32(0x00ff0000)
#define H2M_MAILBOX_CSR_OWNER FIELD32(0xff000000)
/*
* MCU_LEDCS: LED control for MCU Mailbox.
*/
#define MCU_LEDCS_LED_MODE FIELD16(0x001f)
#define MCU_LEDCS_RADIO_STATUS FIELD16(0x0020)
#define MCU_LEDCS_LINK_BG_STATUS FIELD16(0x0040)
#define MCU_LEDCS_LINK_A_STATUS FIELD16(0x0080)
#define MCU_LEDCS_POLARITY_GPIO_0 FIELD16(0x0100)
#define MCU_LEDCS_POLARITY_GPIO_1 FIELD16(0x0200)
#define MCU_LEDCS_POLARITY_GPIO_2 FIELD16(0x0400)
#define MCU_LEDCS_POLARITY_GPIO_3 FIELD16(0x0800)
#define MCU_LEDCS_POLARITY_GPIO_4 FIELD16(0x1000)
#define MCU_LEDCS_POLARITY_ACT FIELD16(0x2000)
#define MCU_LEDCS_POLARITY_READY_BG FIELD16(0x4000)
#define MCU_LEDCS_POLARITY_READY_A FIELD16(0x8000)
/*
* M2H_CMD_DONE_CSR.
*/
#define M2H_CMD_DONE_CSR 0x2104
/*
* MCU_TXOP_ARRAY_BASE.
*/
#define MCU_TXOP_ARRAY_BASE 0x2110
/*
* MAC Control/Status Registers(CSR).
* Some values are set in TU, whereas 1 TU == 1024 us.
*/
/*
* MAC_CSR0: ASIC revision number.
*/
#define MAC_CSR0 0x3000
/*
* MAC_CSR1: System control register.
* SOFT_RESET: Software reset bit, 1: reset, 0: normal.
* BBP_RESET: Hardware reset BBP.
* HOST_READY: Host is ready after initialization, 1: ready.
*/
#define MAC_CSR1 0x3004
#define MAC_CSR1_SOFT_RESET FIELD32(0x00000001)
#define MAC_CSR1_BBP_RESET FIELD32(0x00000002)
#define MAC_CSR1_HOST_READY FIELD32(0x00000004)
/*
* MAC_CSR2: STA MAC register 0.
*/
#define MAC_CSR2 0x3008
#define MAC_CSR2_BYTE0 FIELD32(0x000000ff)
#define MAC_CSR2_BYTE1 FIELD32(0x0000ff00)
#define MAC_CSR2_BYTE2 FIELD32(0x00ff0000)
#define MAC_CSR2_BYTE3 FIELD32(0xff000000)
/*
* MAC_CSR3: STA MAC register 1.
* UNICAST_TO_ME_MASK:
* Used to mask off bits from byte 5 of the MAC address
* to determine the UNICAST_TO_ME bit for RX frames.
* The full mask is complemented by BSS_ID_MASK:
* MASK = BSS_ID_MASK & UNICAST_TO_ME_MASK
*/
#define MAC_CSR3 0x300c
#define MAC_CSR3_BYTE4 FIELD32(0x000000ff)
#define MAC_CSR3_BYTE5 FIELD32(0x0000ff00)
#define MAC_CSR3_UNICAST_TO_ME_MASK FIELD32(0x00ff0000)
/*
* MAC_CSR4: BSSID register 0.
*/
#define MAC_CSR4 0x3010
#define MAC_CSR4_BYTE0 FIELD32(0x000000ff)
#define MAC_CSR4_BYTE1 FIELD32(0x0000ff00)
#define MAC_CSR4_BYTE2 FIELD32(0x00ff0000)
#define MAC_CSR4_BYTE3 FIELD32(0xff000000)
/*
* MAC_CSR5: BSSID register 1.
* BSS_ID_MASK:
* This mask is used to mask off bits 0 and 1 of byte 5 of the
* BSSID. This will make sure that those bits will be ignored
* when determining the MY_BSS of RX frames.
* 0: 1-BSSID mode (BSS index = 0)
* 1: 2-BSSID mode (BSS index: Byte5, bit 0)
* 2: 2-BSSID mode (BSS index: byte5, bit 1)
* 3: 4-BSSID mode (BSS index: byte5, bit 0 - 1)
*/
#define MAC_CSR5 0x3014
#define MAC_CSR5_BYTE4 FIELD32(0x000000ff)
#define MAC_CSR5_BYTE5 FIELD32(0x0000ff00)
#define MAC_CSR5_BSS_ID_MASK FIELD32(0x00ff0000)
/*
* MAC_CSR6: Maximum frame length register.
*/
#define MAC_CSR6 0x3018
#define MAC_CSR6_MAX_FRAME_UNIT FIELD32(0x00000fff)
/*
* MAC_CSR7: Reserved
*/
#define MAC_CSR7 0x301c
/*
* MAC_CSR8: SIFS/EIFS register.
* All units are in US.
*/
#define MAC_CSR8 0x3020
#define MAC_CSR8_SIFS FIELD32(0x000000ff)
#define MAC_CSR8_SIFS_AFTER_RX_OFDM FIELD32(0x0000ff00)
#define MAC_CSR8_EIFS FIELD32(0xffff0000)
/*
* MAC_CSR9: Back-Off control register.
* SLOT_TIME: Slot time, default is 20us for 802.11BG.
* CWMIN: Bit for Cwmin. default Cwmin is 31 (2^5 - 1).
* CWMAX: Bit for Cwmax, default Cwmax is 1023 (2^10 - 1).
* CW_SELECT: 1: CWmin/Cwmax select from register, 0:select from TxD.
*/
#define MAC_CSR9 0x3024
#define MAC_CSR9_SLOT_TIME FIELD32(0x000000ff)
#define MAC_CSR9_CWMIN FIELD32(0x00000f00)
#define MAC_CSR9_CWMAX FIELD32(0x0000f000)
#define MAC_CSR9_CW_SELECT FIELD32(0x00010000)
/*
* MAC_CSR10: Power state configuration.
*/
#define MAC_CSR10 0x3028
/*
* MAC_CSR11: Power saving transition time register.
* DELAY_AFTER_TBCN: Delay after Tbcn expired in units of TU.
* TBCN_BEFORE_WAKEUP: Number of beacon before wakeup.
* WAKEUP_LATENCY: In unit of TU.
*/
#define MAC_CSR11 0x302c
#define MAC_CSR11_DELAY_AFTER_TBCN FIELD32(0x000000ff)
#define MAC_CSR11_TBCN_BEFORE_WAKEUP FIELD32(0x00007f00)
#define MAC_CSR11_AUTOWAKE FIELD32(0x00008000)
#define MAC_CSR11_WAKEUP_LATENCY FIELD32(0x000f0000)
/*
* MAC_CSR12: Manual power control / status register (merge CSR20 & PWRCSR1).
* CURRENT_STATE: 0:sleep, 1:awake.
* FORCE_WAKEUP: This has higher priority than PUT_TO_SLEEP.
* BBP_CURRENT_STATE: 0: BBP sleep, 1: BBP awake.
*/
#define MAC_CSR12 0x3030
#define MAC_CSR12_CURRENT_STATE FIELD32(0x00000001)
#define MAC_CSR12_PUT_TO_SLEEP FIELD32(0x00000002)
#define MAC_CSR12_FORCE_WAKEUP FIELD32(0x00000004)
#define MAC_CSR12_BBP_CURRENT_STATE FIELD32(0x00000008)
/*
* MAC_CSR13: GPIO.
*/
#define MAC_CSR13 0x3034
#define MAC_CSR13_BIT0 FIELD32(0x00000001)
#define MAC_CSR13_BIT1 FIELD32(0x00000002)
#define MAC_CSR13_BIT2 FIELD32(0x00000004)
#define MAC_CSR13_BIT3 FIELD32(0x00000008)
#define MAC_CSR13_BIT4 FIELD32(0x00000010)
#define MAC_CSR13_BIT5 FIELD32(0x00000020)
#define MAC_CSR13_BIT6 FIELD32(0x00000040)
#define MAC_CSR13_BIT7 FIELD32(0x00000080)
#define MAC_CSR13_BIT8 FIELD32(0x00000100)
#define MAC_CSR13_BIT9 FIELD32(0x00000200)
#define MAC_CSR13_BIT10 FIELD32(0x00000400)
#define MAC_CSR13_BIT11 FIELD32(0x00000800)
#define MAC_CSR13_BIT12 FIELD32(0x00001000)
/*
* MAC_CSR14: LED control register.
* ON_PERIOD: On period, default 70ms.
* OFF_PERIOD: Off period, default 30ms.
* HW_LED: HW TX activity, 1: normal OFF, 0: normal ON.
* SW_LED: s/w LED, 1: ON, 0: OFF.
* HW_LED_POLARITY: 0: active low, 1: active high.
*/
#define MAC_CSR14 0x3038
#define MAC_CSR14_ON_PERIOD FIELD32(0x000000ff)
#define MAC_CSR14_OFF_PERIOD FIELD32(0x0000ff00)
#define MAC_CSR14_HW_LED FIELD32(0x00010000)
#define MAC_CSR14_SW_LED FIELD32(0x00020000)
#define MAC_CSR14_HW_LED_POLARITY FIELD32(0x00040000)
#define MAC_CSR14_SW_LED2 FIELD32(0x00080000)
/*
* MAC_CSR15: NAV control.
*/
#define MAC_CSR15 0x303c
/*
* TXRX control registers.
* Some values are set in TU, whereas 1 TU == 1024 us.
*/
/*
* TXRX_CSR0: TX/RX configuration register.
* TSF_OFFSET: Default is 24.
* AUTO_TX_SEQ: 1: ASIC auto replace sequence nr in outgoing frame.
* DISABLE_RX: Disable Rx engine.
* DROP_CRC: Drop CRC error.
* DROP_PHYSICAL: Drop physical error.
* DROP_CONTROL: Drop control frame.
* DROP_NOT_TO_ME: Drop not to me unicast frame.
* DROP_TO_DS: Drop fram ToDs bit is true.
* DROP_VERSION_ERROR: Drop version error frame.
* DROP_MULTICAST: Drop multicast frames.
* DROP_BORADCAST: Drop broadcast frames.
* ROP_ACK_CTS: Drop received ACK and CTS.
*/
#define TXRX_CSR0 0x3040
#define TXRX_CSR0_RX_ACK_TIMEOUT FIELD32(0x000001ff)
#define TXRX_CSR0_TSF_OFFSET FIELD32(0x00007e00)
#define TXRX_CSR0_AUTO_TX_SEQ FIELD32(0x00008000)
#define TXRX_CSR0_DISABLE_RX FIELD32(0x00010000)
#define TXRX_CSR0_DROP_CRC FIELD32(0x00020000)
#define TXRX_CSR0_DROP_PHYSICAL FIELD32(0x00040000)
#define TXRX_CSR0_DROP_CONTROL FIELD32(0x00080000)
#define TXRX_CSR0_DROP_NOT_TO_ME FIELD32(0x00100000)
#define TXRX_CSR0_DROP_TO_DS FIELD32(0x00200000)
#define TXRX_CSR0_DROP_VERSION_ERROR FIELD32(0x00400000)
#define TXRX_CSR0_DROP_MULTICAST FIELD32(0x00800000)
#define TXRX_CSR0_DROP_BROADCAST FIELD32(0x01000000)
#define TXRX_CSR0_DROP_ACK_CTS FIELD32(0x02000000)
#define TXRX_CSR0_TX_WITHOUT_WAITING FIELD32(0x04000000)
/*
* TXRX_CSR1
*/
#define TXRX_CSR1 0x3044
#define TXRX_CSR1_BBP_ID0 FIELD32(0x0000007f)
#define TXRX_CSR1_BBP_ID0_VALID FIELD32(0x00000080)
#define TXRX_CSR1_BBP_ID1 FIELD32(0x00007f00)
#define TXRX_CSR1_BBP_ID1_VALID FIELD32(0x00008000)
#define TXRX_CSR1_BBP_ID2 FIELD32(0x007f0000)
#define TXRX_CSR1_BBP_ID2_VALID FIELD32(0x00800000)
#define TXRX_CSR1_BBP_ID3 FIELD32(0x7f000000)
#define TXRX_CSR1_BBP_ID3_VALID FIELD32(0x80000000)
/*
* TXRX_CSR2
*/
#define TXRX_CSR2 0x3048
#define TXRX_CSR2_BBP_ID0 FIELD32(0x0000007f)
#define TXRX_CSR2_BBP_ID0_VALID FIELD32(0x00000080)
#define TXRX_CSR2_BBP_ID1 FIELD32(0x00007f00)
#define TXRX_CSR2_BBP_ID1_VALID FIELD32(0x00008000)
#define TXRX_CSR2_BBP_ID2 FIELD32(0x007f0000)
#define TXRX_CSR2_BBP_ID2_VALID FIELD32(0x00800000)
#define TXRX_CSR2_BBP_ID3 FIELD32(0x7f000000)
#define TXRX_CSR2_BBP_ID3_VALID FIELD32(0x80000000)
/*
* TXRX_CSR3
*/
#define TXRX_CSR3 0x304c
#define TXRX_CSR3_BBP_ID0 FIELD32(0x0000007f)
#define TXRX_CSR3_BBP_ID0_VALID FIELD32(0x00000080)
#define TXRX_CSR3_BBP_ID1 FIELD32(0x00007f00)
#define TXRX_CSR3_BBP_ID1_VALID FIELD32(0x00008000)
#define TXRX_CSR3_BBP_ID2 FIELD32(0x007f0000)
#define TXRX_CSR3_BBP_ID2_VALID FIELD32(0x00800000)
#define TXRX_CSR3_BBP_ID3 FIELD32(0x7f000000)
#define TXRX_CSR3_BBP_ID3_VALID FIELD32(0x80000000)
/*
* TXRX_CSR4: Auto-Responder/Tx-retry register.
* AUTORESPOND_PREAMBLE: 0:long, 1:short preamble.
* OFDM_TX_RATE_DOWN: 1:enable.
* OFDM_TX_RATE_STEP: 0:1-step, 1: 2-step, 2:3-step, 3:4-step.
* OFDM_TX_FALLBACK_CCK: 0: Fallback to OFDM 6M only, 1: Fallback to CCK 1M,2M.
*/
#define TXRX_CSR4 0x3050
#define TXRX_CSR4_TX_ACK_TIMEOUT FIELD32(0x000000ff)
#define TXRX_CSR4_CNTL_ACK_POLICY FIELD32(0x00000700)
#define TXRX_CSR4_ACK_CTS_PSM FIELD32(0x00010000)
#define TXRX_CSR4_AUTORESPOND_ENABLE FIELD32(0x00020000)
#define TXRX_CSR4_AUTORESPOND_PREAMBLE FIELD32(0x00040000)
#define TXRX_CSR4_OFDM_TX_RATE_DOWN FIELD32(0x00080000)
#define TXRX_CSR4_OFDM_TX_RATE_STEP FIELD32(0x00300000)
#define TXRX_CSR4_OFDM_TX_FALLBACK_CCK FIELD32(0x00400000)
#define TXRX_CSR4_LONG_RETRY_LIMIT FIELD32(0x0f000000)
#define TXRX_CSR4_SHORT_RETRY_LIMIT FIELD32(0xf0000000)
/*
* TXRX_CSR5
*/
#define TXRX_CSR5 0x3054
/*
* TXRX_CSR6: ACK/CTS payload consumed time
*/
#define TXRX_CSR6 0x3058
/*
* TXRX_CSR7: OFDM ACK/CTS payload consumed time for 6/9/12/18 mbps.
*/
#define TXRX_CSR7 0x305c
#define TXRX_CSR7_ACK_CTS_6MBS FIELD32(0x000000ff)
#define TXRX_CSR7_ACK_CTS_9MBS FIELD32(0x0000ff00)
#define TXRX_CSR7_ACK_CTS_12MBS FIELD32(0x00ff0000)
#define TXRX_CSR7_ACK_CTS_18MBS FIELD32(0xff000000)
/*
* TXRX_CSR8: OFDM ACK/CTS payload consumed time for 24/36/48/54 mbps.
*/
#define TXRX_CSR8 0x3060
#define TXRX_CSR8_ACK_CTS_24MBS FIELD32(0x000000ff)
#define TXRX_CSR8_ACK_CTS_36MBS FIELD32(0x0000ff00)
#define TXRX_CSR8_ACK_CTS_48MBS FIELD32(0x00ff0000)
#define TXRX_CSR8_ACK_CTS_54MBS FIELD32(0xff000000)
/*
* TXRX_CSR9: Synchronization control register.
* BEACON_INTERVAL: In unit of 1/16 TU.
* TSF_TICKING: Enable TSF auto counting.
* TSF_SYNC: Tsf sync, 0: disable, 1: infra, 2: ad-hoc/master mode.
* BEACON_GEN: Enable beacon generator.
*/
#define TXRX_CSR9 0x3064
#define TXRX_CSR9_BEACON_INTERVAL FIELD32(0x0000ffff)
#define TXRX_CSR9_TSF_TICKING FIELD32(0x00010000)
#define TXRX_CSR9_TSF_SYNC FIELD32(0x00060000)
#define TXRX_CSR9_TBTT_ENABLE FIELD32(0x00080000)
#define TXRX_CSR9_BEACON_GEN FIELD32(0x00100000)
#define TXRX_CSR9_TIMESTAMP_COMPENSATE FIELD32(0xff000000)
/*
* TXRX_CSR10: BEACON alignment.
*/
#define TXRX_CSR10 0x3068
/*
* TXRX_CSR11: AES mask.
*/
#define TXRX_CSR11 0x306c
/*
* TXRX_CSR12: TSF low 32.
*/
#define TXRX_CSR12 0x3070
#define TXRX_CSR12_LOW_TSFTIMER FIELD32(0xffffffff)
/*
* TXRX_CSR13: TSF high 32.
*/
#define TXRX_CSR13 0x3074
#define TXRX_CSR13_HIGH_TSFTIMER FIELD32(0xffffffff)
/*
* TXRX_CSR14: TBTT timer.
*/
#define TXRX_CSR14 0x3078
/*
* TXRX_CSR15: TKIP MIC priority byte "AND" mask.
*/
#define TXRX_CSR15 0x307c
/*
* PHY control registers.
* Some values are set in TU, whereas 1 TU == 1024 us.
*/
/*
* PHY_CSR0: RF/PS control.
*/
#define PHY_CSR0 0x3080
#define PHY_CSR0_PA_PE_BG FIELD32(0x00010000)
#define PHY_CSR0_PA_PE_A FIELD32(0x00020000)
/*
* PHY_CSR1
*/
#define PHY_CSR1 0x3084
/*
* PHY_CSR2: Pre-TX BBP control.
*/
#define PHY_CSR2 0x3088
/*
* PHY_CSR3: BBP serial control register.
* VALUE: Register value to program into BBP.
* REG_NUM: Selected BBP register.
* READ_CONTROL: 0: Write BBP, 1: Read BBP.
* BUSY: 1: ASIC is busy execute BBP programming.
*/
#define PHY_CSR3 0x308c
#define PHY_CSR3_VALUE FIELD32(0x000000ff)
#define PHY_CSR3_REGNUM FIELD32(0x00007f00)
#define PHY_CSR3_READ_CONTROL FIELD32(0x00008000)
#define PHY_CSR3_BUSY FIELD32(0x00010000)
/*
* PHY_CSR4: RF serial control register
* VALUE: Register value (include register id) serial out to RF/IF chip.
* NUMBER_OF_BITS: Number of bits used in RFRegValue (I:20, RFMD:22).
* IF_SELECT: 1: select IF to program, 0: select RF to program.
* PLL_LD: RF PLL_LD status.
* BUSY: 1: ASIC is busy execute RF programming.
*/
#define PHY_CSR4 0x3090
#define PHY_CSR4_VALUE FIELD32(0x00ffffff)
#define PHY_CSR4_NUMBER_OF_BITS FIELD32(0x1f000000)
#define PHY_CSR4_IF_SELECT FIELD32(0x20000000)
#define PHY_CSR4_PLL_LD FIELD32(0x40000000)
#define PHY_CSR4_BUSY FIELD32(0x80000000)
/*
* PHY_CSR5: RX to TX signal switch timing control.
*/
#define PHY_CSR5 0x3094
#define PHY_CSR5_IQ_FLIP FIELD32(0x00000004)
/*
* PHY_CSR6: TX to RX signal timing control.
*/
#define PHY_CSR6 0x3098
#define PHY_CSR6_IQ_FLIP FIELD32(0x00000004)
/*
* PHY_CSR7: TX DAC switching timing control.
*/
#define PHY_CSR7 0x309c
/*
* Security control register.
*/
/*
* SEC_CSR0: Shared key table control.
*/
#define SEC_CSR0 0x30a0
#define SEC_CSR0_BSS0_KEY0_VALID FIELD32(0x00000001)
#define SEC_CSR0_BSS0_KEY1_VALID FIELD32(0x00000002)
#define SEC_CSR0_BSS0_KEY2_VALID FIELD32(0x00000004)
#define SEC_CSR0_BSS0_KEY3_VALID FIELD32(0x00000008)
#define SEC_CSR0_BSS1_KEY0_VALID FIELD32(0x00000010)
#define SEC_CSR0_BSS1_KEY1_VALID FIELD32(0x00000020)
#define SEC_CSR0_BSS1_KEY2_VALID FIELD32(0x00000040)
#define SEC_CSR0_BSS1_KEY3_VALID FIELD32(0x00000080)
#define SEC_CSR0_BSS2_KEY0_VALID FIELD32(0x00000100)
#define SEC_CSR0_BSS2_KEY1_VALID FIELD32(0x00000200)
#define SEC_CSR0_BSS2_KEY2_VALID FIELD32(0x00000400)
#define SEC_CSR0_BSS2_KEY3_VALID FIELD32(0x00000800)
#define SEC_CSR0_BSS3_KEY0_VALID FIELD32(0x00001000)
#define SEC_CSR0_BSS3_KEY1_VALID FIELD32(0x00002000)
#define SEC_CSR0_BSS3_KEY2_VALID FIELD32(0x00004000)
#define SEC_CSR0_BSS3_KEY3_VALID FIELD32(0x00008000)
/*
* SEC_CSR1: Shared key table security mode register.
*/
#define SEC_CSR1 0x30a4
#define SEC_CSR1_BSS0_KEY0_CIPHER_ALG FIELD32(0x00000007)
#define SEC_CSR1_BSS0_KEY1_CIPHER_ALG FIELD32(0x00000070)
#define SEC_CSR1_BSS0_KEY2_CIPHER_ALG FIELD32(0x00000700)
#define SEC_CSR1_BSS0_KEY3_CIPHER_ALG FIELD32(0x00007000)
#define SEC_CSR1_BSS1_KEY0_CIPHER_ALG FIELD32(0x00070000)
#define SEC_CSR1_BSS1_KEY1_CIPHER_ALG FIELD32(0x00700000)
#define SEC_CSR1_BSS1_KEY2_CIPHER_ALG FIELD32(0x07000000)
#define SEC_CSR1_BSS1_KEY3_CIPHER_ALG FIELD32(0x70000000)
/*
* Pairwise key table valid bitmap registers.
* SEC_CSR2: pairwise key table valid bitmap 0.
* SEC_CSR3: pairwise key table valid bitmap 1.
*/
#define SEC_CSR2 0x30a8
#define SEC_CSR3 0x30ac
/*
* SEC_CSR4: Pairwise key table lookup control.
*/
#define SEC_CSR4 0x30b0
#define SEC_CSR4_ENABLE_BSS0 FIELD32(0x00000001)
#define SEC_CSR4_ENABLE_BSS1 FIELD32(0x00000002)
#define SEC_CSR4_ENABLE_BSS2 FIELD32(0x00000004)
#define SEC_CSR4_ENABLE_BSS3 FIELD32(0x00000008)
/*
* SEC_CSR5: shared key table security mode register.
*/
#define SEC_CSR5 0x30b4
#define SEC_CSR5_BSS2_KEY0_CIPHER_ALG FIELD32(0x00000007)
#define SEC_CSR5_BSS2_KEY1_CIPHER_ALG FIELD32(0x00000070)
#define SEC_CSR5_BSS2_KEY2_CIPHER_ALG FIELD32(0x00000700)
#define SEC_CSR5_BSS2_KEY3_CIPHER_ALG FIELD32(0x00007000)
#define SEC_CSR5_BSS3_KEY0_CIPHER_ALG FIELD32(0x00070000)
#define SEC_CSR5_BSS3_KEY1_CIPHER_ALG FIELD32(0x00700000)
#define SEC_CSR5_BSS3_KEY2_CIPHER_ALG FIELD32(0x07000000)
#define SEC_CSR5_BSS3_KEY3_CIPHER_ALG FIELD32(0x70000000)
/*
* STA control registers.
*/
/*
* STA_CSR0: RX PLCP error count & RX FCS error count.
*/
#define STA_CSR0 0x30c0
#define STA_CSR0_FCS_ERROR FIELD32(0x0000ffff)
#define STA_CSR0_PLCP_ERROR FIELD32(0xffff0000)
/*
* STA_CSR1: RX False CCA count & RX LONG frame count.
*/
#define STA_CSR1 0x30c4
#define STA_CSR1_PHYSICAL_ERROR FIELD32(0x0000ffff)
#define STA_CSR1_FALSE_CCA_ERROR FIELD32(0xffff0000)
/*
* STA_CSR2: TX Beacon count and RX FIFO overflow count.
*/
#define STA_CSR2 0x30c8
#define STA_CSR2_RX_FIFO_OVERFLOW_COUNT FIELD32(0x0000ffff)
#define STA_CSR2_RX_OVERFLOW_COUNT FIELD32(0xffff0000)
/*
* STA_CSR3: TX Beacon count.
*/
#define STA_CSR3 0x30cc
#define STA_CSR3_TX_BEACON_COUNT FIELD32(0x0000ffff)
/*
* STA_CSR4: TX Result status register.
* VALID: 1:This register contains a valid TX result.
*/
#define STA_CSR4 0x30d0
#define STA_CSR4_VALID FIELD32(0x00000001)
#define STA_CSR4_TX_RESULT FIELD32(0x0000000e)
#define STA_CSR4_RETRY_COUNT FIELD32(0x000000f0)
#define STA_CSR4_PID_SUBTYPE FIELD32(0x00001f00)
#define STA_CSR4_PID_TYPE FIELD32(0x0000e000)
#define STA_CSR4_TXRATE FIELD32(0x000f0000)
/*
* QOS control registers.
*/
/*
* QOS_CSR0: TXOP holder MAC address register.
*/
#define QOS_CSR0 0x30e0
#define QOS_CSR0_BYTE0 FIELD32(0x000000ff)
#define QOS_CSR0_BYTE1 FIELD32(0x0000ff00)
#define QOS_CSR0_BYTE2 FIELD32(0x00ff0000)
#define QOS_CSR0_BYTE3 FIELD32(0xff000000)
/*
* QOS_CSR1: TXOP holder MAC address register.
*/
#define QOS_CSR1 0x30e4
#define QOS_CSR1_BYTE4 FIELD32(0x000000ff)
#define QOS_CSR1_BYTE5 FIELD32(0x0000ff00)
/*
* QOS_CSR2: TXOP holder timeout register.
*/
#define QOS_CSR2 0x30e8
/*
* RX QOS-CFPOLL MAC address register.
* QOS_CSR3: RX QOS-CFPOLL MAC address 0.
* QOS_CSR4: RX QOS-CFPOLL MAC address 1.
*/
#define QOS_CSR3 0x30ec
#define QOS_CSR4 0x30f0
/*
* QOS_CSR5: "QosControl" field of the RX QOS-CFPOLL.
*/
#define QOS_CSR5 0x30f4
/*
* Host DMA registers.
*/
/*
* AC0_BASE_CSR: AC_BK base address.
*/
#define AC0_BASE_CSR 0x3400
#define AC0_BASE_CSR_RING_REGISTER FIELD32(0xffffffff)
/*
* AC1_BASE_CSR: AC_BE base address.
*/
#define AC1_BASE_CSR 0x3404
#define AC1_BASE_CSR_RING_REGISTER FIELD32(0xffffffff)
/*
* AC2_BASE_CSR: AC_VI base address.
*/
#define AC2_BASE_CSR 0x3408
#define AC2_BASE_CSR_RING_REGISTER FIELD32(0xffffffff)
/*
* AC3_BASE_CSR: AC_VO base address.
*/
#define AC3_BASE_CSR 0x340c
#define AC3_BASE_CSR_RING_REGISTER FIELD32(0xffffffff)
/*
* MGMT_BASE_CSR: MGMT ring base address.
*/
#define MGMT_BASE_CSR 0x3410
#define MGMT_BASE_CSR_RING_REGISTER FIELD32(0xffffffff)
/*
* TX_RING_CSR0: TX Ring size for AC_BK, AC_BE, AC_VI, AC_VO.
*/
#define TX_RING_CSR0 0x3418
#define TX_RING_CSR0_AC0_RING_SIZE FIELD32(0x000000ff)
#define TX_RING_CSR0_AC1_RING_SIZE FIELD32(0x0000ff00)
#define TX_RING_CSR0_AC2_RING_SIZE FIELD32(0x00ff0000)
#define TX_RING_CSR0_AC3_RING_SIZE FIELD32(0xff000000)
/*
* TX_RING_CSR1: TX Ring size for MGMT Ring, HCCA Ring
* TXD_SIZE: In unit of 32-bit.
*/
#define TX_RING_CSR1 0x341c
#define TX_RING_CSR1_MGMT_RING_SIZE FIELD32(0x000000ff)
#define TX_RING_CSR1_HCCA_RING_SIZE FIELD32(0x0000ff00)
#define TX_RING_CSR1_TXD_SIZE FIELD32(0x003f0000)
/*
* AIFSN_CSR: AIFSN for each EDCA AC.
* AIFSN0: For AC_BK.
* AIFSN1: For AC_BE.
* AIFSN2: For AC_VI.
* AIFSN3: For AC_VO.
*/
#define AIFSN_CSR 0x3420
#define AIFSN_CSR_AIFSN0 FIELD32(0x0000000f)
#define AIFSN_CSR_AIFSN1 FIELD32(0x000000f0)
#define AIFSN_CSR_AIFSN2 FIELD32(0x00000f00)
#define AIFSN_CSR_AIFSN3 FIELD32(0x0000f000)
/*
* CWMIN_CSR: CWmin for each EDCA AC.
* CWMIN0: For AC_BK.
* CWMIN1: For AC_BE.
* CWMIN2: For AC_VI.
* CWMIN3: For AC_VO.
*/
#define CWMIN_CSR 0x3424
#define CWMIN_CSR_CWMIN0 FIELD32(0x0000000f)
#define CWMIN_CSR_CWMIN1 FIELD32(0x000000f0)
#define CWMIN_CSR_CWMIN2 FIELD32(0x00000f00)
#define CWMIN_CSR_CWMIN3 FIELD32(0x0000f000)
/*
* CWMAX_CSR: CWmax for each EDCA AC.
* CWMAX0: For AC_BK.
* CWMAX1: For AC_BE.
* CWMAX2: For AC_VI.
* CWMAX3: For AC_VO.
*/
#define CWMAX_CSR 0x3428
#define CWMAX_CSR_CWMAX0 FIELD32(0x0000000f)
#define CWMAX_CSR_CWMAX1 FIELD32(0x000000f0)
#define CWMAX_CSR_CWMAX2 FIELD32(0x00000f00)
#define CWMAX_CSR_CWMAX3 FIELD32(0x0000f000)
/*
* TX_DMA_DST_CSR: TX DMA destination
* 0: TX ring0, 1: TX ring1, 2: TX ring2 3: invalid
*/
#define TX_DMA_DST_CSR 0x342c
#define TX_DMA_DST_CSR_DEST_AC0 FIELD32(0x00000003)
#define TX_DMA_DST_CSR_DEST_AC1 FIELD32(0x0000000c)
#define TX_DMA_DST_CSR_DEST_AC2 FIELD32(0x00000030)
#define TX_DMA_DST_CSR_DEST_AC3 FIELD32(0x000000c0)
#define TX_DMA_DST_CSR_DEST_MGMT FIELD32(0x00000300)
/*
* TX_CNTL_CSR: KICK/Abort TX.
* KICK_TX_AC0: For AC_BK.
* KICK_TX_AC1: For AC_BE.
* KICK_TX_AC2: For AC_VI.
* KICK_TX_AC3: For AC_VO.
* ABORT_TX_AC0: For AC_BK.
* ABORT_TX_AC1: For AC_BE.
* ABORT_TX_AC2: For AC_VI.
* ABORT_TX_AC3: For AC_VO.
*/
#define TX_CNTL_CSR 0x3430
#define TX_CNTL_CSR_KICK_TX_AC0 FIELD32(0x00000001)
#define TX_CNTL_CSR_KICK_TX_AC1 FIELD32(0x00000002)
#define TX_CNTL_CSR_KICK_TX_AC2 FIELD32(0x00000004)
#define TX_CNTL_CSR_KICK_TX_AC3 FIELD32(0x00000008)
#define TX_CNTL_CSR_KICK_TX_MGMT FIELD32(0x00000010)
#define TX_CNTL_CSR_ABORT_TX_AC0 FIELD32(0x00010000)
#define TX_CNTL_CSR_ABORT_TX_AC1 FIELD32(0x00020000)
#define TX_CNTL_CSR_ABORT_TX_AC2 FIELD32(0x00040000)
#define TX_CNTL_CSR_ABORT_TX_AC3 FIELD32(0x00080000)
#define TX_CNTL_CSR_ABORT_TX_MGMT FIELD32(0x00100000)
/*
* LOAD_TX_RING_CSR: Load RX desriptor
*/
#define LOAD_TX_RING_CSR 0x3434
#define LOAD_TX_RING_CSR_LOAD_TXD_AC0 FIELD32(0x00000001)
#define LOAD_TX_RING_CSR_LOAD_TXD_AC1 FIELD32(0x00000002)
#define LOAD_TX_RING_CSR_LOAD_TXD_AC2 FIELD32(0x00000004)
#define LOAD_TX_RING_CSR_LOAD_TXD_AC3 FIELD32(0x00000008)
#define LOAD_TX_RING_CSR_LOAD_TXD_MGMT FIELD32(0x00000010)
/*
* Several read-only registers, for debugging.
*/
#define AC0_TXPTR_CSR 0x3438
#define AC1_TXPTR_CSR 0x343c
#define AC2_TXPTR_CSR 0x3440
#define AC3_TXPTR_CSR 0x3444
#define MGMT_TXPTR_CSR 0x3448
/*
* RX_BASE_CSR
*/
#define RX_BASE_CSR 0x3450
#define RX_BASE_CSR_RING_REGISTER FIELD32(0xffffffff)
/*
* RX_RING_CSR.
* RXD_SIZE: In unit of 32-bit.
*/
#define RX_RING_CSR 0x3454
#define RX_RING_CSR_RING_SIZE FIELD32(0x000000ff)
#define RX_RING_CSR_RXD_SIZE FIELD32(0x00003f00)
#define RX_RING_CSR_RXD_WRITEBACK_SIZE FIELD32(0x00070000)
/*
* RX_CNTL_CSR
*/
#define RX_CNTL_CSR 0x3458
#define RX_CNTL_CSR_ENABLE_RX_DMA FIELD32(0x00000001)
#define RX_CNTL_CSR_LOAD_RXD FIELD32(0x00000002)
/*
* RXPTR_CSR: Read-only, for debugging.
*/
#define RXPTR_CSR 0x345c
/*
* PCI_CFG_CSR
*/
#define PCI_CFG_CSR 0x3460
/*
* BUF_FORMAT_CSR
*/
#define BUF_FORMAT_CSR 0x3464
/*
* INT_SOURCE_CSR: Interrupt source register.
* Write one to clear corresponding bit.
*/
#define INT_SOURCE_CSR 0x3468
#define INT_SOURCE_CSR_TXDONE FIELD32(0x00000001)
#define INT_SOURCE_CSR_RXDONE FIELD32(0x00000002)
#define INT_SOURCE_CSR_BEACON_DONE FIELD32(0x00000004)
#define INT_SOURCE_CSR_TX_ABORT_DONE FIELD32(0x00000010)
#define INT_SOURCE_CSR_AC0_DMA_DONE FIELD32(0x00010000)
#define INT_SOURCE_CSR_AC1_DMA_DONE FIELD32(0x00020000)
#define INT_SOURCE_CSR_AC2_DMA_DONE FIELD32(0x00040000)
#define INT_SOURCE_CSR_AC3_DMA_DONE FIELD32(0x00080000)
#define INT_SOURCE_CSR_MGMT_DMA_DONE FIELD32(0x00100000)
#define INT_SOURCE_CSR_HCCA_DMA_DONE FIELD32(0x00200000)
/*
* INT_MASK_CSR: Interrupt MASK register. 1: the interrupt is mask OFF.
* MITIGATION_PERIOD: Interrupt mitigation in unit of 32 PCI clock.
*/
#define INT_MASK_CSR 0x346c
#define INT_MASK_CSR_TXDONE FIELD32(0x00000001)
#define INT_MASK_CSR_RXDONE FIELD32(0x00000002)
#define INT_MASK_CSR_BEACON_DONE FIELD32(0x00000004)
#define INT_MASK_CSR_TX_ABORT_DONE FIELD32(0x00000010)
#define INT_MASK_CSR_ENABLE_MITIGATION FIELD32(0x00000080)
#define INT_MASK_CSR_MITIGATION_PERIOD FIELD32(0x0000ff00)
#define INT_MASK_CSR_AC0_DMA_DONE FIELD32(0x00010000)
#define INT_MASK_CSR_AC1_DMA_DONE FIELD32(0x00020000)
#define INT_MASK_CSR_AC2_DMA_DONE FIELD32(0x00040000)
#define INT_MASK_CSR_AC3_DMA_DONE FIELD32(0x00080000)
#define INT_MASK_CSR_MGMT_DMA_DONE FIELD32(0x00100000)
#define INT_MASK_CSR_HCCA_DMA_DONE FIELD32(0x00200000)
/*
* E2PROM_CSR: EEPROM control register.
* RELOAD: Write 1 to reload eeprom content.
* TYPE_93C46: 1: 93c46, 0:93c66.
* LOAD_STATUS: 1:loading, 0:done.
*/
#define E2PROM_CSR 0x3470
#define E2PROM_CSR_RELOAD FIELD32(0x00000001)
#define E2PROM_CSR_DATA_CLOCK FIELD32(0x00000002)
#define E2PROM_CSR_CHIP_SELECT FIELD32(0x00000004)
#define E2PROM_CSR_DATA_IN FIELD32(0x00000008)
#define E2PROM_CSR_DATA_OUT FIELD32(0x00000010)
#define E2PROM_CSR_TYPE_93C46 FIELD32(0x00000020)
#define E2PROM_CSR_LOAD_STATUS FIELD32(0x00000040)
/*
* AC_TXOP_CSR0: AC_BK/AC_BE TXOP register.
* AC0_TX_OP: For AC_BK, in unit of 32us.
* AC1_TX_OP: For AC_BE, in unit of 32us.
*/
#define AC_TXOP_CSR0 0x3474
#define AC_TXOP_CSR0_AC0_TX_OP FIELD32(0x0000ffff)
#define AC_TXOP_CSR0_AC1_TX_OP FIELD32(0xffff0000)
/*
* AC_TXOP_CSR1: AC_VO/AC_VI TXOP register.
* AC2_TX_OP: For AC_VI, in unit of 32us.
* AC3_TX_OP: For AC_VO, in unit of 32us.
*/
#define AC_TXOP_CSR1 0x3478
#define AC_TXOP_CSR1_AC2_TX_OP FIELD32(0x0000ffff)
#define AC_TXOP_CSR1_AC3_TX_OP FIELD32(0xffff0000)
/*
* DMA_STATUS_CSR
*/
#define DMA_STATUS_CSR 0x3480
/*
* TEST_MODE_CSR
*/
#define TEST_MODE_CSR 0x3484
/*
* UART0_TX_CSR
*/
#define UART0_TX_CSR 0x3488
/*
* UART0_RX_CSR
*/
#define UART0_RX_CSR 0x348c
/*
* UART0_FRAME_CSR
*/
#define UART0_FRAME_CSR 0x3490
/*
* UART0_BUFFER_CSR
*/
#define UART0_BUFFER_CSR 0x3494
/*
* IO_CNTL_CSR
* RF_PS: Set RF interface value to power save
*/
#define IO_CNTL_CSR 0x3498
#define IO_CNTL_CSR_RF_PS FIELD32(0x00000004)
/*
* UART_INT_SOURCE_CSR
*/
#define UART_INT_SOURCE_CSR 0x34a8
/*
* UART_INT_MASK_CSR
*/
#define UART_INT_MASK_CSR 0x34ac
/*
* PBF_QUEUE_CSR
*/
#define PBF_QUEUE_CSR 0x34b0
/*
* Firmware DMA registers.
* Firmware DMA registers are dedicated for MCU usage
* and should not be touched by host driver.
* Therefore we skip the definition of these registers.
*/
#define FW_TX_BASE_CSR 0x34c0
#define FW_TX_START_CSR 0x34c4
#define FW_TX_LAST_CSR 0x34c8
#define FW_MODE_CNTL_CSR 0x34cc
#define FW_TXPTR_CSR 0x34d0
/*
* 8051 firmware image.
*/
#define FIRMWARE_RT2561 "rt2561.bin"
#define FIRMWARE_RT2561s "rt2561s.bin"
#define FIRMWARE_RT2661 "rt2661.bin"
#define FIRMWARE_IMAGE_BASE 0x4000
/*
* BBP registers.
* The wordsize of the BBP is 8 bits.
*/
/*
* R2
*/
#define BBP_R2_BG_MODE FIELD8(0x20)
/*
* R3
*/
#define BBP_R3_SMART_MODE FIELD8(0x01)
/*
* R4: RX antenna control
* FRAME_END: 1 - DPDT, 0 - SPDT (Only valid for 802.11G, RF2527 & RF2529)
*/
/*
* ANTENNA_CONTROL semantics (guessed):
* 0x1: Software controlled antenna switching (fixed or SW diversity)
* 0x2: Hardware diversity.
*/
#define BBP_R4_RX_ANTENNA_CONTROL FIELD8(0x03)
#define BBP_R4_RX_FRAME_END FIELD8(0x20)
/*
* R77
*/
#define BBP_R77_RX_ANTENNA FIELD8(0x03)
/*
* RF registers
*/
/*
* RF 3
*/
#define RF3_TXPOWER FIELD32(0x00003e00)
/*
* RF 4
*/
#define RF4_FREQ_OFFSET FIELD32(0x0003f000)
/*
* EEPROM content.
* The wordsize of the EEPROM is 16 bits.
*/
/*
* HW MAC address.
*/
#define EEPROM_MAC_ADDR_0 0x0002
#define EEPROM_MAC_ADDR_BYTE0 FIELD16(0x00ff)
#define EEPROM_MAC_ADDR_BYTE1 FIELD16(0xff00)
#define EEPROM_MAC_ADDR1 0x0003
#define EEPROM_MAC_ADDR_BYTE2 FIELD16(0x00ff)
#define EEPROM_MAC_ADDR_BYTE3 FIELD16(0xff00)
#define EEPROM_MAC_ADDR_2 0x0004
#define EEPROM_MAC_ADDR_BYTE4 FIELD16(0x00ff)
#define EEPROM_MAC_ADDR_BYTE5 FIELD16(0xff00)
/*
* EEPROM antenna.
* ANTENNA_NUM: Number of antenna's.
* TX_DEFAULT: Default antenna 0: diversity, 1: A, 2: B.
* RX_DEFAULT: Default antenna 0: diversity, 1: A, 2: B.
* FRAME_TYPE: 0: DPDT , 1: SPDT , noted this bit is valid for g only.
* DYN_TXAGC: Dynamic TX AGC control.
* HARDWARE_RADIO: 1: Hardware controlled radio. Read GPIO0.
* RF_TYPE: Rf_type of this adapter.
*/
#define EEPROM_ANTENNA 0x0010
#define EEPROM_ANTENNA_NUM FIELD16(0x0003)
#define EEPROM_ANTENNA_TX_DEFAULT FIELD16(0x000c)
#define EEPROM_ANTENNA_RX_DEFAULT FIELD16(0x0030)
#define EEPROM_ANTENNA_FRAME_TYPE FIELD16(0x0040)
#define EEPROM_ANTENNA_DYN_TXAGC FIELD16(0x0200)
#define EEPROM_ANTENNA_HARDWARE_RADIO FIELD16(0x0400)
#define EEPROM_ANTENNA_RF_TYPE FIELD16(0xf800)
/*
* EEPROM NIC config.
* ENABLE_DIVERSITY: 1:enable, 0:disable.
* EXTERNAL_LNA_BG: External LNA enable for 2.4G.
* CARDBUS_ACCEL: 0:enable, 1:disable.
* EXTERNAL_LNA_A: External LNA enable for 5G.
*/
#define EEPROM_NIC 0x0011
#define EEPROM_NIC_ENABLE_DIVERSITY FIELD16(0x0001)
#define EEPROM_NIC_TX_DIVERSITY FIELD16(0x0002)
#define EEPROM_NIC_RX_FIXED FIELD16(0x0004)
#define EEPROM_NIC_TX_FIXED FIELD16(0x0008)
#define EEPROM_NIC_EXTERNAL_LNA_BG FIELD16(0x0010)
#define EEPROM_NIC_CARDBUS_ACCEL FIELD16(0x0020)
#define EEPROM_NIC_EXTERNAL_LNA_A FIELD16(0x0040)
/*
* EEPROM geography.
* GEO_A: Default geographical setting for 5GHz band
* GEO: Default geographical setting.
*/
#define EEPROM_GEOGRAPHY 0x0012
#define EEPROM_GEOGRAPHY_GEO_A FIELD16(0x00ff)
#define EEPROM_GEOGRAPHY_GEO FIELD16(0xff00)
/*
* EEPROM BBP.
*/
#define EEPROM_BBP_START 0x0013
#define EEPROM_BBP_SIZE 16
#define EEPROM_BBP_VALUE FIELD16(0x00ff)
#define EEPROM_BBP_REG_ID FIELD16(0xff00)
/*
* EEPROM TXPOWER 802.11G
*/
#define EEPROM_TXPOWER_G_START 0x0023
#define EEPROM_TXPOWER_G_SIZE 7
#define EEPROM_TXPOWER_G_1 FIELD16(0x00ff)
#define EEPROM_TXPOWER_G_2 FIELD16(0xff00)
/*
* EEPROM Frequency
*/
#define EEPROM_FREQ 0x002f
#define EEPROM_FREQ_OFFSET FIELD16(0x00ff)
#define EEPROM_FREQ_SEQ_MASK FIELD16(0xff00)
#define EEPROM_FREQ_SEQ FIELD16(0x0300)
/*
* EEPROM LED.
* POLARITY_RDY_G: Polarity RDY_G setting.
* POLARITY_RDY_A: Polarity RDY_A setting.
* POLARITY_ACT: Polarity ACT setting.
* POLARITY_GPIO_0: Polarity GPIO0 setting.
* POLARITY_GPIO_1: Polarity GPIO1 setting.
* POLARITY_GPIO_2: Polarity GPIO2 setting.
* POLARITY_GPIO_3: Polarity GPIO3 setting.
* POLARITY_GPIO_4: Polarity GPIO4 setting.
* LED_MODE: Led mode.
*/
#define EEPROM_LED 0x0030
#define EEPROM_LED_POLARITY_RDY_G FIELD16(0x0001)
#define EEPROM_LED_POLARITY_RDY_A FIELD16(0x0002)
#define EEPROM_LED_POLARITY_ACT FIELD16(0x0004)
#define EEPROM_LED_POLARITY_GPIO_0 FIELD16(0x0008)
#define EEPROM_LED_POLARITY_GPIO_1 FIELD16(0x0010)
#define EEPROM_LED_POLARITY_GPIO_2 FIELD16(0x0020)
#define EEPROM_LED_POLARITY_GPIO_3 FIELD16(0x0040)
#define EEPROM_LED_POLARITY_GPIO_4 FIELD16(0x0080)
#define EEPROM_LED_LED_MODE FIELD16(0x1f00)
/*
* EEPROM TXPOWER 802.11A
*/
#define EEPROM_TXPOWER_A_START 0x0031
#define EEPROM_TXPOWER_A_SIZE 12
#define EEPROM_TXPOWER_A_1 FIELD16(0x00ff)
#define EEPROM_TXPOWER_A_2 FIELD16(0xff00)
/*
* EEPROM RSSI offset 802.11BG
*/
#define EEPROM_RSSI_OFFSET_BG 0x004d
#define EEPROM_RSSI_OFFSET_BG_1 FIELD16(0x00ff)
#define EEPROM_RSSI_OFFSET_BG_2 FIELD16(0xff00)
/*
* EEPROM RSSI offset 802.11A
*/
#define EEPROM_RSSI_OFFSET_A 0x004e
#define EEPROM_RSSI_OFFSET_A_1 FIELD16(0x00ff)
#define EEPROM_RSSI_OFFSET_A_2 FIELD16(0xff00)
/*
* MCU mailbox commands.
*/
#define MCU_SLEEP 0x30
#define MCU_WAKEUP 0x31
#define MCU_LED 0x50
#define MCU_LED_STRENGTH 0x52
/*
* DMA descriptor defines.
*/
#define TXD_DESC_SIZE ( 16 * sizeof(__le32) )
#define TXINFO_SIZE ( 6 * sizeof(__le32) )
#define RXD_DESC_SIZE ( 16 * sizeof(__le32) )
/*
* TX descriptor format for TX, PRIO and Beacon Ring.
*/
/*
* Word0
* TKIP_MIC: ASIC appends TKIP MIC if TKIP is used.
* KEY_TABLE: Use per-client pairwise KEY table.
* KEY_INDEX:
* Key index (0~31) to the pairwise KEY table.
* 0~3 to shared KEY table 0 (BSS0).
* 4~7 to shared KEY table 1 (BSS1).
* 8~11 to shared KEY table 2 (BSS2).
* 12~15 to shared KEY table 3 (BSS3).
* BURST: Next frame belongs to same "burst" event.
*/
#define TXD_W0_OWNER_NIC FIELD32(0x00000001)
#define TXD_W0_VALID FIELD32(0x00000002)
#define TXD_W0_MORE_FRAG FIELD32(0x00000004)
#define TXD_W0_ACK FIELD32(0x00000008)
#define TXD_W0_TIMESTAMP FIELD32(0x00000010)
#define TXD_W0_OFDM FIELD32(0x00000020)
#define TXD_W0_IFS FIELD32(0x00000040)
#define TXD_W0_RETRY_MODE FIELD32(0x00000080)
#define TXD_W0_TKIP_MIC FIELD32(0x00000100)
#define TXD_W0_KEY_TABLE FIELD32(0x00000200)
#define TXD_W0_KEY_INDEX FIELD32(0x0000fc00)
#define TXD_W0_DATABYTE_COUNT FIELD32(0x0fff0000)
#define TXD_W0_BURST FIELD32(0x10000000)
#define TXD_W0_CIPHER_ALG FIELD32(0xe0000000)
/*
* Word1
* HOST_Q_ID: EDCA/HCCA queue ID.
* HW_SEQUENCE: MAC overwrites the frame sequence number.
* BUFFER_COUNT: Number of buffers in this TXD.
*/
#define TXD_W1_HOST_Q_ID FIELD32(0x0000000f)
#define TXD_W1_AIFSN FIELD32(0x000000f0)
#define TXD_W1_CWMIN FIELD32(0x00000f00)
#define TXD_W1_CWMAX FIELD32(0x0000f000)
#define TXD_W1_IV_OFFSET FIELD32(0x003f0000)
#define TXD_W1_PIGGY_BACK FIELD32(0x01000000)
#define TXD_W1_HW_SEQUENCE FIELD32(0x10000000)
#define TXD_W1_BUFFER_COUNT FIELD32(0xe0000000)
/*
* Word2: PLCP information
*/
#define TXD_W2_PLCP_SIGNAL FIELD32(0x000000ff)
#define TXD_W2_PLCP_SERVICE FIELD32(0x0000ff00)
#define TXD_W2_PLCP_LENGTH_LOW FIELD32(0x00ff0000)
#define TXD_W2_PLCP_LENGTH_HIGH FIELD32(0xff000000)
/*
* Word3
*/
#define TXD_W3_IV FIELD32(0xffffffff)
/*
* Word4
*/
#define TXD_W4_EIV FIELD32(0xffffffff)
/*
* Word5
* FRAME_OFFSET: Frame start offset inside ASIC TXFIFO (after TXINFO field).
* TXD_W5_PID_SUBTYPE: Driver assigned packet ID index for txdone handler.
* TXD_W5_PID_TYPE: Driver assigned packet ID type for txdone handler.
* WAITING_DMA_DONE_INT: TXD been filled with data
* and waiting for TxDoneISR housekeeping.
*/
#define TXD_W5_FRAME_OFFSET FIELD32(0x000000ff)
#define TXD_W5_PID_SUBTYPE FIELD32(0x00001f00)
#define TXD_W5_PID_TYPE FIELD32(0x0000e000)
#define TXD_W5_TX_POWER FIELD32(0x00ff0000)
#define TXD_W5_WAITING_DMA_DONE_INT FIELD32(0x01000000)
/*
* the above 24-byte is called TXINFO and will be DMAed to MAC block
* through TXFIFO. MAC block use this TXINFO to control the transmission
* behavior of this frame.
* The following fields are not used by MAC block.
* They are used by DMA block and HOST driver only.
* Once a frame has been DMA to ASIC, all the following fields are useless
* to ASIC.
*/
/*
* Word6-10: Buffer physical address
*/
#define TXD_W6_BUFFER_PHYSICAL_ADDRESS FIELD32(0xffffffff)
#define TXD_W7_BUFFER_PHYSICAL_ADDRESS FIELD32(0xffffffff)
#define TXD_W8_BUFFER_PHYSICAL_ADDRESS FIELD32(0xffffffff)
#define TXD_W9_BUFFER_PHYSICAL_ADDRESS FIELD32(0xffffffff)
#define TXD_W10_BUFFER_PHYSICAL_ADDRESS FIELD32(0xffffffff)
/*
* Word11-13: Buffer length
*/
#define TXD_W11_BUFFER_LENGTH0 FIELD32(0x00000fff)
#define TXD_W11_BUFFER_LENGTH1 FIELD32(0x0fff0000)
#define TXD_W12_BUFFER_LENGTH2 FIELD32(0x00000fff)
#define TXD_W12_BUFFER_LENGTH3 FIELD32(0x0fff0000)
#define TXD_W13_BUFFER_LENGTH4 FIELD32(0x00000fff)
/*
* Word14
*/
#define TXD_W14_SK_BUFFER FIELD32(0xffffffff)
/*
* Word15
*/
#define TXD_W15_NEXT_SK_BUFFER FIELD32(0xffffffff)
/*
* RX descriptor format for RX Ring.
*/
/*
* Word0
* CIPHER_ERROR: 1:ICV error, 2:MIC error, 3:invalid key.
* KEY_INDEX: Decryption key actually used.
*/
#define RXD_W0_OWNER_NIC FIELD32(0x00000001)
#define RXD_W0_DROP FIELD32(0x00000002)
#define RXD_W0_UNICAST_TO_ME FIELD32(0x00000004)
#define RXD_W0_MULTICAST FIELD32(0x00000008)
#define RXD_W0_BROADCAST FIELD32(0x00000010)
#define RXD_W0_MY_BSS FIELD32(0x00000020)
#define RXD_W0_CRC_ERROR FIELD32(0x00000040)
#define RXD_W0_OFDM FIELD32(0x00000080)
#define RXD_W0_CIPHER_ERROR FIELD32(0x00000300)
#define RXD_W0_KEY_INDEX FIELD32(0x0000fc00)
#define RXD_W0_DATABYTE_COUNT FIELD32(0x0fff0000)
#define RXD_W0_CIPHER_ALG FIELD32(0xe0000000)
/*
* Word1
* SIGNAL: RX raw data rate reported by BBP.
*/
#define RXD_W1_SIGNAL FIELD32(0x000000ff)
#define RXD_W1_RSSI_AGC FIELD32(0x00001f00)
#define RXD_W1_RSSI_LNA FIELD32(0x00006000)
#define RXD_W1_FRAME_OFFSET FIELD32(0x7f000000)
/*
* Word2
* IV: Received IV of originally encrypted.
*/
#define RXD_W2_IV FIELD32(0xffffffff)
/*
* Word3
* EIV: Received EIV of originally encrypted.
*/
#define RXD_W3_EIV FIELD32(0xffffffff)
/*
* Word4
* ICV: Received ICV of originally encrypted.
* NOTE: This is a guess, the official definition is "reserved"
*/
#define RXD_W4_ICV FIELD32(0xffffffff)
/*
* the above 20-byte is called RXINFO and will be DMAed to MAC RX block
* and passed to the HOST driver.
* The following fields are for DMA block and HOST usage only.
* Can't be touched by ASIC MAC block.
*/
/*
* Word5
*/
#define RXD_W5_BUFFER_PHYSICAL_ADDRESS FIELD32(0xffffffff)
/*
* Word6-15: Reserved
*/
#define RXD_W6_RESERVED FIELD32(0xffffffff)
#define RXD_W7_RESERVED FIELD32(0xffffffff)
#define RXD_W8_RESERVED FIELD32(0xffffffff)
#define RXD_W9_RESERVED FIELD32(0xffffffff)
#define RXD_W10_RESERVED FIELD32(0xffffffff)
#define RXD_W11_RESERVED FIELD32(0xffffffff)
#define RXD_W12_RESERVED FIELD32(0xffffffff)
#define RXD_W13_RESERVED FIELD32(0xffffffff)
#define RXD_W14_RESERVED FIELD32(0xffffffff)
#define RXD_W15_RESERVED FIELD32(0xffffffff)
/*
* Macro's for converting txpower from EEPROM to mac80211 value
* and from mac80211 value to register value.
*/
#define MIN_TXPOWER 0
#define MAX_TXPOWER 31
#define DEFAULT_TXPOWER 24
#define TXPOWER_FROM_DEV(__txpower) \
(((u8)(__txpower)) > MAX_TXPOWER) ? DEFAULT_TXPOWER : (__txpower)
#define TXPOWER_TO_DEV(__txpower) \
clamp_t(char, __txpower, MIN_TXPOWER, MAX_TXPOWER)
#endif /* RT61PCI_H */