225 lines
5.3 KiB
C
225 lines
5.3 KiB
C
/*
|
|
* Definitions for Intel 82593 CSMA/CD Core LAN Controller
|
|
* The definitions are taken from the 1992 users manual with Intel
|
|
* order number 297125-001.
|
|
*
|
|
* /usr/src/pc/RCS/i82593.h,v 1.1 1996/07/17 15:23:12 root Exp
|
|
*
|
|
* Copyright 1994, Anders Klemets <klemets@it.kth.se>
|
|
*
|
|
* This software may be freely distributed for noncommercial purposes
|
|
* as long as this notice is retained.
|
|
*
|
|
* HISTORY
|
|
* i82593.h,v
|
|
* Revision 1.1 1996/07/17 15:23:12 root
|
|
* Initial revision
|
|
*
|
|
* Revision 1.3 1995/04/05 15:13:58 adj
|
|
* Initial alpha release
|
|
*
|
|
* Revision 1.2 1994/06/16 23:57:31 klemets
|
|
* Mirrored all the fields in the configuration block.
|
|
*
|
|
* Revision 1.1 1994/06/02 20:25:34 klemets
|
|
* Initial revision
|
|
*
|
|
*
|
|
*/
|
|
#ifndef _I82593_H
|
|
#define _I82593_H
|
|
|
|
/* Intel 82593 CSMA/CD Core LAN Controller */
|
|
|
|
/* Port 0 Command Register definitions */
|
|
|
|
/* Execution operations */
|
|
#define OP0_NOP 0 /* CHNL = 0 */
|
|
#define OP0_SWIT_TO_PORT_1 0 /* CHNL = 1 */
|
|
#define OP0_IA_SETUP 1
|
|
#define OP0_CONFIGURE 2
|
|
#define OP0_MC_SETUP 3
|
|
#define OP0_TRANSMIT 4
|
|
#define OP0_TDR 5
|
|
#define OP0_DUMP 6
|
|
#define OP0_DIAGNOSE 7
|
|
#define OP0_TRANSMIT_NO_CRC 9
|
|
#define OP0_RETRANSMIT 12
|
|
#define OP0_ABORT 13
|
|
/* Reception operations */
|
|
#define OP0_RCV_ENABLE 8
|
|
#define OP0_RCV_DISABLE 10
|
|
#define OP0_STOP_RCV 11
|
|
/* Status pointer control operations */
|
|
#define OP0_FIX_PTR 15 /* CHNL = 1 */
|
|
#define OP0_RLS_PTR 15 /* CHNL = 0 */
|
|
#define OP0_RESET 14
|
|
|
|
#define CR0_CHNL (1 << 4) /* 0=Channel 0, 1=Channel 1 */
|
|
#define CR0_STATUS_0 0x00
|
|
#define CR0_STATUS_1 0x20
|
|
#define CR0_STATUS_2 0x40
|
|
#define CR0_STATUS_3 0x60
|
|
#define CR0_INT_ACK (1 << 7) /* 0=No ack, 1=acknowledge */
|
|
|
|
/* Port 0 Status Register definitions */
|
|
|
|
#define SR0_NO_RESULT 0 /* dummy */
|
|
#define SR0_EVENT_MASK 0x0f
|
|
#define SR0_IA_SETUP_DONE 1
|
|
#define SR0_CONFIGURE_DONE 2
|
|
#define SR0_MC_SETUP_DONE 3
|
|
#define SR0_TRANSMIT_DONE 4
|
|
#define SR0_TDR_DONE 5
|
|
#define SR0_DUMP_DONE 6
|
|
#define SR0_DIAGNOSE_PASSED 7
|
|
#define SR0_TRANSMIT_NO_CRC_DONE 9
|
|
#define SR0_RETRANSMIT_DONE 12
|
|
#define SR0_EXECUTION_ABORTED 13
|
|
#define SR0_END_OF_FRAME 8
|
|
#define SR0_RECEPTION_ABORTED 10
|
|
#define SR0_DIAGNOSE_FAILED 15
|
|
#define SR0_STOP_REG_HIT 11
|
|
|
|
#define SR0_CHNL (1 << 4)
|
|
#define SR0_EXECUTION (1 << 5)
|
|
#define SR0_RECEPTION (1 << 6)
|
|
#define SR0_INTERRUPT (1 << 7)
|
|
#define SR0_BOTH_RX_TX (SR0_EXECUTION | SR0_RECEPTION)
|
|
|
|
#define SR3_EXEC_STATE_MASK 0x03
|
|
#define SR3_EXEC_IDLE 0
|
|
#define SR3_TX_ABORT_IN_PROGRESS 1
|
|
#define SR3_EXEC_ACTIVE 2
|
|
#define SR3_ABORT_IN_PROGRESS 3
|
|
#define SR3_EXEC_CHNL (1 << 2)
|
|
#define SR3_STP_ON_NO_RSRC (1 << 3)
|
|
#define SR3_RCVING_NO_RSRC (1 << 4)
|
|
#define SR3_RCV_STATE_MASK 0x60
|
|
#define SR3_RCV_IDLE 0x00
|
|
#define SR3_RCV_READY 0x20
|
|
#define SR3_RCV_ACTIVE 0x40
|
|
#define SR3_RCV_STOP_IN_PROG 0x60
|
|
#define SR3_RCV_CHNL (1 << 7)
|
|
|
|
/* Port 1 Command Register definitions */
|
|
|
|
#define OP1_NOP 0
|
|
#define OP1_SWIT_TO_PORT_0 1
|
|
#define OP1_INT_DISABLE 2
|
|
#define OP1_INT_ENABLE 3
|
|
#define OP1_SET_TS 5
|
|
#define OP1_RST_TS 7
|
|
#define OP1_POWER_DOWN 8
|
|
#define OP1_RESET_RING_MNGMT 11
|
|
#define OP1_RESET 14
|
|
#define OP1_SEL_RST 15
|
|
|
|
#define CR1_STATUS_4 0x00
|
|
#define CR1_STATUS_5 0x20
|
|
#define CR1_STATUS_6 0x40
|
|
#define CR1_STOP_REG_UPDATE (1 << 7)
|
|
|
|
/* Receive frame status bits */
|
|
|
|
#define RX_RCLD (1 << 0)
|
|
#define RX_IA_MATCH (1 << 1)
|
|
#define RX_NO_AD_MATCH (1 << 2)
|
|
#define RX_NO_SFD (1 << 3)
|
|
#define RX_SRT_FRM (1 << 7)
|
|
#define RX_OVRRUN (1 << 8)
|
|
#define RX_ALG_ERR (1 << 10)
|
|
#define RX_CRC_ERR (1 << 11)
|
|
#define RX_LEN_ERR (1 << 12)
|
|
#define RX_RCV_OK (1 << 13)
|
|
#define RX_TYP_LEN (1 << 15)
|
|
|
|
/* Transmit status bits */
|
|
|
|
#define TX_NCOL_MASK 0x0f
|
|
#define TX_FRTL (1 << 4)
|
|
#define TX_MAX_COL (1 << 5)
|
|
#define TX_HRT_BEAT (1 << 6)
|
|
#define TX_DEFER (1 << 7)
|
|
#define TX_UND_RUN (1 << 8)
|
|
#define TX_LOST_CTS (1 << 9)
|
|
#define TX_LOST_CRS (1 << 10)
|
|
#define TX_LTCOL (1 << 11)
|
|
#define TX_OK (1 << 13)
|
|
#define TX_COLL (1 << 15)
|
|
|
|
struct i82593_conf_block {
|
|
u_char fifo_limit : 4,
|
|
forgnesi : 1,
|
|
fifo_32 : 1,
|
|
d6mod : 1,
|
|
throttle_enb : 1;
|
|
u_char throttle : 6,
|
|
cntrxint : 1,
|
|
contin : 1;
|
|
u_char addr_len : 3,
|
|
acloc : 1,
|
|
preamb_len : 2,
|
|
loopback : 2;
|
|
u_char lin_prio : 3,
|
|
tbofstop : 1,
|
|
exp_prio : 3,
|
|
bof_met : 1;
|
|
u_char : 4,
|
|
ifrm_spc : 4;
|
|
u_char : 5,
|
|
slottim_low : 3;
|
|
u_char slottim_hi : 3,
|
|
: 1,
|
|
max_retr : 4;
|
|
u_char prmisc : 1,
|
|
bc_dis : 1,
|
|
: 1,
|
|
crs_1 : 1,
|
|
nocrc_ins : 1,
|
|
crc_1632 : 1,
|
|
: 1,
|
|
crs_cdt : 1;
|
|
u_char cs_filter : 3,
|
|
crs_src : 1,
|
|
cd_filter : 3,
|
|
: 1;
|
|
u_char : 2,
|
|
min_fr_len : 6;
|
|
u_char lng_typ : 1,
|
|
lng_fld : 1,
|
|
rxcrc_xf : 1,
|
|
artx : 1,
|
|
sarec : 1,
|
|
tx_jabber : 1, /* why is this called max_len in the manual? */
|
|
hash_1 : 1,
|
|
lbpkpol : 1;
|
|
u_char : 6,
|
|
fdx : 1,
|
|
: 1;
|
|
u_char dummy_6 : 6, /* supposed to be ones */
|
|
mult_ia : 1,
|
|
dis_bof : 1;
|
|
u_char dummy_1 : 1, /* supposed to be one */
|
|
tx_ifs_retrig : 2,
|
|
mc_all : 1,
|
|
rcv_mon : 2,
|
|
frag_acpt : 1,
|
|
tstrttrs : 1;
|
|
u_char fretx : 1,
|
|
runt_eop : 1,
|
|
hw_sw_pin : 1,
|
|
big_endn : 1,
|
|
syncrqs : 1,
|
|
sttlen : 1,
|
|
tx_eop : 1,
|
|
rx_eop : 1;
|
|
u_char rbuf_size : 5,
|
|
rcvstop : 1,
|
|
: 2;
|
|
};
|
|
|
|
#define I82593_MAX_MULTICAST_ADDRESSES 128 /* Hardware hashed filter */
|
|
|
|
#endif /* _I82593_H */
|