268 lines
6.3 KiB
C
268 lines
6.3 KiB
C
// SPDX-License-Identifier: GPL-2.0-or-later
|
|
/*
|
|
* Copyright (c) 2016, Prodys S.L.
|
|
*
|
|
* This adds support for sbs-charger compilant chips as defined here:
|
|
* http://sbs-forum.org/specs/sbc110.pdf
|
|
*
|
|
* Implemetation based on sbs-battery.c
|
|
*/
|
|
|
|
#include <linux/init.h>
|
|
#include <linux/module.h>
|
|
#include <linux/kernel.h>
|
|
#include <linux/err.h>
|
|
#include <linux/power_supply.h>
|
|
#include <linux/i2c.h>
|
|
#include <linux/slab.h>
|
|
#include <linux/interrupt.h>
|
|
#include <linux/gpio.h>
|
|
#include <linux/regmap.h>
|
|
#include <linux/of_gpio.h>
|
|
#include <linux/bitops.h>
|
|
|
|
#define SBS_CHARGER_REG_SPEC_INFO 0x11
|
|
#define SBS_CHARGER_REG_STATUS 0x13
|
|
#define SBS_CHARGER_REG_ALARM_WARNING 0x16
|
|
|
|
#define SBS_CHARGER_STATUS_CHARGE_INHIBITED BIT(1)
|
|
#define SBS_CHARGER_STATUS_RES_COLD BIT(9)
|
|
#define SBS_CHARGER_STATUS_RES_HOT BIT(10)
|
|
#define SBS_CHARGER_STATUS_BATTERY_PRESENT BIT(14)
|
|
#define SBS_CHARGER_STATUS_AC_PRESENT BIT(15)
|
|
|
|
#define SBS_CHARGER_POLL_TIME 500
|
|
|
|
struct sbs_info {
|
|
struct i2c_client *client;
|
|
struct power_supply *power_supply;
|
|
struct regmap *regmap;
|
|
struct delayed_work work;
|
|
unsigned int last_state;
|
|
};
|
|
|
|
static int sbs_get_property(struct power_supply *psy,
|
|
enum power_supply_property psp,
|
|
union power_supply_propval *val)
|
|
{
|
|
struct sbs_info *chip = power_supply_get_drvdata(psy);
|
|
unsigned int reg;
|
|
|
|
reg = chip->last_state;
|
|
|
|
switch (psp) {
|
|
case POWER_SUPPLY_PROP_PRESENT:
|
|
val->intval = !!(reg & SBS_CHARGER_STATUS_BATTERY_PRESENT);
|
|
break;
|
|
|
|
case POWER_SUPPLY_PROP_ONLINE:
|
|
val->intval = !!(reg & SBS_CHARGER_STATUS_AC_PRESENT);
|
|
break;
|
|
|
|
case POWER_SUPPLY_PROP_STATUS:
|
|
val->intval = POWER_SUPPLY_STATUS_UNKNOWN;
|
|
|
|
if (!(reg & SBS_CHARGER_STATUS_BATTERY_PRESENT))
|
|
val->intval = POWER_SUPPLY_STATUS_NOT_CHARGING;
|
|
else if (reg & SBS_CHARGER_STATUS_AC_PRESENT &&
|
|
!(reg & SBS_CHARGER_STATUS_CHARGE_INHIBITED))
|
|
val->intval = POWER_SUPPLY_STATUS_CHARGING;
|
|
else
|
|
val->intval = POWER_SUPPLY_STATUS_DISCHARGING;
|
|
|
|
break;
|
|
|
|
case POWER_SUPPLY_PROP_HEALTH:
|
|
if (reg & SBS_CHARGER_STATUS_RES_COLD)
|
|
val->intval = POWER_SUPPLY_HEALTH_COLD;
|
|
if (reg & SBS_CHARGER_STATUS_RES_HOT)
|
|
val->intval = POWER_SUPPLY_HEALTH_OVERHEAT;
|
|
else
|
|
val->intval = POWER_SUPPLY_HEALTH_GOOD;
|
|
|
|
break;
|
|
|
|
default:
|
|
return -EINVAL;
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int sbs_check_state(struct sbs_info *chip)
|
|
{
|
|
unsigned int reg;
|
|
int ret;
|
|
|
|
ret = regmap_read(chip->regmap, SBS_CHARGER_REG_STATUS, ®);
|
|
if (!ret && reg != chip->last_state) {
|
|
chip->last_state = reg;
|
|
power_supply_changed(chip->power_supply);
|
|
return 1;
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
static void sbs_delayed_work(struct work_struct *work)
|
|
{
|
|
struct sbs_info *chip = container_of(work, struct sbs_info, work.work);
|
|
|
|
sbs_check_state(chip);
|
|
|
|
schedule_delayed_work(&chip->work,
|
|
msecs_to_jiffies(SBS_CHARGER_POLL_TIME));
|
|
}
|
|
|
|
static irqreturn_t sbs_irq_thread(int irq, void *data)
|
|
{
|
|
struct sbs_info *chip = data;
|
|
int ret;
|
|
|
|
ret = sbs_check_state(chip);
|
|
|
|
return ret ? IRQ_HANDLED : IRQ_NONE;
|
|
}
|
|
|
|
static enum power_supply_property sbs_properties[] = {
|
|
POWER_SUPPLY_PROP_STATUS,
|
|
POWER_SUPPLY_PROP_PRESENT,
|
|
POWER_SUPPLY_PROP_ONLINE,
|
|
POWER_SUPPLY_PROP_HEALTH,
|
|
};
|
|
|
|
static bool sbs_readable_reg(struct device *dev, unsigned int reg)
|
|
{
|
|
return reg >= SBS_CHARGER_REG_SPEC_INFO;
|
|
}
|
|
|
|
static bool sbs_volatile_reg(struct device *dev, unsigned int reg)
|
|
{
|
|
switch (reg) {
|
|
case SBS_CHARGER_REG_STATUS:
|
|
return true;
|
|
}
|
|
|
|
return false;
|
|
}
|
|
|
|
static const struct regmap_config sbs_regmap = {
|
|
.reg_bits = 8,
|
|
.val_bits = 16,
|
|
.max_register = SBS_CHARGER_REG_ALARM_WARNING,
|
|
.readable_reg = sbs_readable_reg,
|
|
.volatile_reg = sbs_volatile_reg,
|
|
.val_format_endian = REGMAP_ENDIAN_LITTLE, /* since based on SMBus */
|
|
};
|
|
|
|
static const struct power_supply_desc sbs_desc = {
|
|
.name = "sbs-charger",
|
|
.type = POWER_SUPPLY_TYPE_MAINS,
|
|
.properties = sbs_properties,
|
|
.num_properties = ARRAY_SIZE(sbs_properties),
|
|
.get_property = sbs_get_property,
|
|
};
|
|
|
|
static int sbs_probe(struct i2c_client *client,
|
|
const struct i2c_device_id *id)
|
|
{
|
|
struct power_supply_config psy_cfg = {};
|
|
struct sbs_info *chip;
|
|
int ret, val;
|
|
|
|
chip = devm_kzalloc(&client->dev, sizeof(struct sbs_info), GFP_KERNEL);
|
|
if (!chip)
|
|
return -ENOMEM;
|
|
|
|
chip->client = client;
|
|
psy_cfg.of_node = client->dev.of_node;
|
|
psy_cfg.drv_data = chip;
|
|
|
|
i2c_set_clientdata(client, chip);
|
|
|
|
chip->regmap = devm_regmap_init_i2c(client, &sbs_regmap);
|
|
if (IS_ERR(chip->regmap))
|
|
return PTR_ERR(chip->regmap);
|
|
|
|
/*
|
|
* Before we register, we need to make sure we can actually talk
|
|
* to the battery.
|
|
*/
|
|
ret = regmap_read(chip->regmap, SBS_CHARGER_REG_STATUS, &val);
|
|
if (ret) {
|
|
dev_err(&client->dev, "Failed to get device status\n");
|
|
return ret;
|
|
}
|
|
chip->last_state = val;
|
|
|
|
chip->power_supply = devm_power_supply_register(&client->dev, &sbs_desc,
|
|
&psy_cfg);
|
|
if (IS_ERR(chip->power_supply)) {
|
|
dev_err(&client->dev, "Failed to register power supply\n");
|
|
return PTR_ERR(chip->power_supply);
|
|
}
|
|
|
|
/*
|
|
* The sbs-charger spec doesn't impose the use of an interrupt. So in
|
|
* the case it wasn't provided we use polling in order get the charger's
|
|
* status.
|
|
*/
|
|
if (client->irq) {
|
|
ret = devm_request_threaded_irq(&client->dev, client->irq,
|
|
NULL, sbs_irq_thread,
|
|
IRQF_TRIGGER_FALLING | IRQF_ONESHOT,
|
|
dev_name(&client->dev), chip);
|
|
if (ret) {
|
|
dev_err(&client->dev, "Failed to request irq, %d\n", ret);
|
|
return ret;
|
|
}
|
|
} else {
|
|
INIT_DELAYED_WORK(&chip->work, sbs_delayed_work);
|
|
schedule_delayed_work(&chip->work,
|
|
msecs_to_jiffies(SBS_CHARGER_POLL_TIME));
|
|
}
|
|
|
|
dev_info(&client->dev,
|
|
"%s: smart charger device registered\n", client->name);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int sbs_remove(struct i2c_client *client)
|
|
{
|
|
struct sbs_info *chip = i2c_get_clientdata(client);
|
|
|
|
cancel_delayed_work_sync(&chip->work);
|
|
|
|
return 0;
|
|
}
|
|
|
|
#ifdef CONFIG_OF
|
|
static const struct of_device_id sbs_dt_ids[] = {
|
|
{ .compatible = "sbs,sbs-charger" },
|
|
{ },
|
|
};
|
|
MODULE_DEVICE_TABLE(of, sbs_dt_ids);
|
|
#endif
|
|
|
|
static const struct i2c_device_id sbs_id[] = {
|
|
{ "sbs-charger", 0 },
|
|
{ }
|
|
};
|
|
MODULE_DEVICE_TABLE(i2c, sbs_id);
|
|
|
|
static struct i2c_driver sbs_driver = {
|
|
.probe = sbs_probe,
|
|
.remove = sbs_remove,
|
|
.id_table = sbs_id,
|
|
.driver = {
|
|
.name = "sbs-charger",
|
|
.of_match_table = of_match_ptr(sbs_dt_ids),
|
|
},
|
|
};
|
|
module_i2c_driver(sbs_driver);
|
|
|
|
MODULE_AUTHOR("Nicolas Saenz Julienne <nicolassaenzj@gmail.com>");
|
|
MODULE_DESCRIPTION("SBS smart charger driver");
|
|
MODULE_LICENSE("GPL v2");
|