408 lines
13 KiB
C
408 lines
13 KiB
C
/* SPDX-License-Identifier: GPL-2.0-only */
|
|
/* Copyright(c) 2020-2021 Intel Corporation. */
|
|
#ifndef __CXL_MEM_H__
|
|
#define __CXL_MEM_H__
|
|
#include <uapi/linux/cxl_mem.h>
|
|
#include <linux/cdev.h>
|
|
#include "cxl.h"
|
|
|
|
/* CXL 2.0 8.2.8.5.1.1 Memory Device Status Register */
|
|
#define CXLMDEV_STATUS_OFFSET 0x0
|
|
#define CXLMDEV_DEV_FATAL BIT(0)
|
|
#define CXLMDEV_FW_HALT BIT(1)
|
|
#define CXLMDEV_STATUS_MEDIA_STATUS_MASK GENMASK(3, 2)
|
|
#define CXLMDEV_MS_NOT_READY 0
|
|
#define CXLMDEV_MS_READY 1
|
|
#define CXLMDEV_MS_ERROR 2
|
|
#define CXLMDEV_MS_DISABLED 3
|
|
#define CXLMDEV_READY(status) \
|
|
(FIELD_GET(CXLMDEV_STATUS_MEDIA_STATUS_MASK, status) == \
|
|
CXLMDEV_MS_READY)
|
|
#define CXLMDEV_MBOX_IF_READY BIT(4)
|
|
#define CXLMDEV_RESET_NEEDED_MASK GENMASK(7, 5)
|
|
#define CXLMDEV_RESET_NEEDED_NOT 0
|
|
#define CXLMDEV_RESET_NEEDED_COLD 1
|
|
#define CXLMDEV_RESET_NEEDED_WARM 2
|
|
#define CXLMDEV_RESET_NEEDED_HOT 3
|
|
#define CXLMDEV_RESET_NEEDED_CXL 4
|
|
#define CXLMDEV_RESET_NEEDED(status) \
|
|
(FIELD_GET(CXLMDEV_RESET_NEEDED_MASK, status) != \
|
|
CXLMDEV_RESET_NEEDED_NOT)
|
|
|
|
/**
|
|
* struct cxl_memdev - CXL bus object representing a Type-3 Memory Device
|
|
* @dev: driver core device object
|
|
* @cdev: char dev core object for ioctl operations
|
|
* @cxlds: The device state backing this device
|
|
* @detach_work: active memdev lost a port in its ancestry
|
|
* @id: id number of this memdev instance.
|
|
*/
|
|
struct cxl_memdev {
|
|
struct device dev;
|
|
struct cdev cdev;
|
|
struct cxl_dev_state *cxlds;
|
|
struct work_struct detach_work;
|
|
int id;
|
|
};
|
|
|
|
static inline struct cxl_memdev *to_cxl_memdev(struct device *dev)
|
|
{
|
|
return container_of(dev, struct cxl_memdev, dev);
|
|
}
|
|
|
|
static inline struct cxl_port *cxled_to_port(struct cxl_endpoint_decoder *cxled)
|
|
{
|
|
return to_cxl_port(cxled->cxld.dev.parent);
|
|
}
|
|
|
|
static inline struct cxl_port *cxlrd_to_port(struct cxl_root_decoder *cxlrd)
|
|
{
|
|
return to_cxl_port(cxlrd->cxlsd.cxld.dev.parent);
|
|
}
|
|
|
|
static inline struct cxl_memdev *
|
|
cxled_to_memdev(struct cxl_endpoint_decoder *cxled)
|
|
{
|
|
struct cxl_port *port = to_cxl_port(cxled->cxld.dev.parent);
|
|
|
|
return to_cxl_memdev(port->uport);
|
|
}
|
|
|
|
bool is_cxl_memdev(struct device *dev);
|
|
static inline bool is_cxl_endpoint(struct cxl_port *port)
|
|
{
|
|
return is_cxl_memdev(port->uport);
|
|
}
|
|
|
|
struct cxl_memdev *devm_cxl_add_memdev(struct cxl_dev_state *cxlds);
|
|
|
|
/**
|
|
* struct cxl_mbox_cmd - A command to be submitted to hardware.
|
|
* @opcode: (input) The command set and command submitted to hardware.
|
|
* @payload_in: (input) Pointer to the input payload.
|
|
* @payload_out: (output) Pointer to the output payload. Must be allocated by
|
|
* the caller.
|
|
* @size_in: (input) Number of bytes to load from @payload_in.
|
|
* @size_out: (input) Max number of bytes loaded into @payload_out.
|
|
* (output) Number of bytes generated by the device. For fixed size
|
|
* outputs commands this is always expected to be deterministic. For
|
|
* variable sized output commands, it tells the exact number of bytes
|
|
* written.
|
|
* @return_code: (output) Error code returned from hardware.
|
|
*
|
|
* This is the primary mechanism used to send commands to the hardware.
|
|
* All the fields except @payload_* correspond exactly to the fields described in
|
|
* Command Register section of the CXL 2.0 8.2.8.4.5. @payload_in and
|
|
* @payload_out are written to, and read from the Command Payload Registers
|
|
* defined in CXL 2.0 8.2.8.4.8.
|
|
*/
|
|
struct cxl_mbox_cmd {
|
|
u16 opcode;
|
|
void *payload_in;
|
|
void *payload_out;
|
|
size_t size_in;
|
|
size_t size_out;
|
|
u16 return_code;
|
|
};
|
|
|
|
/*
|
|
* Per CXL 2.0 Section 8.2.8.4.5.1
|
|
*/
|
|
#define CMD_CMD_RC_TABLE \
|
|
C(SUCCESS, 0, NULL), \
|
|
C(BACKGROUND, -ENXIO, "background cmd started successfully"), \
|
|
C(INPUT, -ENXIO, "cmd input was invalid"), \
|
|
C(UNSUPPORTED, -ENXIO, "cmd is not supported"), \
|
|
C(INTERNAL, -ENXIO, "internal device error"), \
|
|
C(RETRY, -ENXIO, "temporary error, retry once"), \
|
|
C(BUSY, -ENXIO, "ongoing background operation"), \
|
|
C(MEDIADISABLED, -ENXIO, "media access is disabled"), \
|
|
C(FWINPROGRESS, -ENXIO, "one FW package can be transferred at a time"), \
|
|
C(FWOOO, -ENXIO, "FW package content was transferred out of order"), \
|
|
C(FWAUTH, -ENXIO, "FW package authentication failed"), \
|
|
C(FWSLOT, -ENXIO, "FW slot is not supported for requested operation"), \
|
|
C(FWROLLBACK, -ENXIO, "rolled back to the previous active FW"), \
|
|
C(FWRESET, -ENXIO, "FW failed to activate, needs cold reset"), \
|
|
C(HANDLE, -ENXIO, "one or more Event Record Handles were invalid"), \
|
|
C(PADDR, -ENXIO, "physical address specified is invalid"), \
|
|
C(POISONLMT, -ENXIO, "poison injection limit has been reached"), \
|
|
C(MEDIAFAILURE, -ENXIO, "permanent issue with the media"), \
|
|
C(ABORT, -ENXIO, "background cmd was aborted by device"), \
|
|
C(SECURITY, -ENXIO, "not valid in the current security state"), \
|
|
C(PASSPHRASE, -ENXIO, "phrase doesn't match current set passphrase"), \
|
|
C(MBUNSUPPORTED, -ENXIO, "unsupported on the mailbox it was issued on"),\
|
|
C(PAYLOADLEN, -ENXIO, "invalid payload length")
|
|
|
|
#undef C
|
|
#define C(a, b, c) CXL_MBOX_CMD_RC_##a
|
|
enum { CMD_CMD_RC_TABLE };
|
|
#undef C
|
|
#define C(a, b, c) { b, c }
|
|
struct cxl_mbox_cmd_rc {
|
|
int err;
|
|
const char *desc;
|
|
};
|
|
|
|
static const
|
|
struct cxl_mbox_cmd_rc cxl_mbox_cmd_rctable[] ={ CMD_CMD_RC_TABLE };
|
|
#undef C
|
|
|
|
static inline const char *cxl_mbox_cmd_rc2str(struct cxl_mbox_cmd *mbox_cmd)
|
|
{
|
|
return cxl_mbox_cmd_rctable[mbox_cmd->return_code].desc;
|
|
}
|
|
|
|
static inline int cxl_mbox_cmd_rc2errno(struct cxl_mbox_cmd *mbox_cmd)
|
|
{
|
|
return cxl_mbox_cmd_rctable[mbox_cmd->return_code].err;
|
|
}
|
|
|
|
/*
|
|
* CXL 2.0 - Memory capacity multiplier
|
|
* See Section 8.2.9.5
|
|
*
|
|
* Volatile, Persistent, and Partition capacities are specified to be in
|
|
* multiples of 256MB - define a multiplier to convert to/from bytes.
|
|
*/
|
|
#define CXL_CAPACITY_MULTIPLIER SZ_256M
|
|
|
|
/**
|
|
* struct cxl_endpoint_dvsec_info - Cached DVSEC info
|
|
* @mem_enabled: cached value of mem_enabled in the DVSEC, PCIE_DEVICE
|
|
* @ranges: Number of active HDM ranges this device uses.
|
|
* @dvsec_range: cached attributes of the ranges in the DVSEC, PCIE_DEVICE
|
|
*/
|
|
struct cxl_endpoint_dvsec_info {
|
|
bool mem_enabled;
|
|
int ranges;
|
|
struct range dvsec_range[2];
|
|
};
|
|
|
|
/**
|
|
* struct cxl_dev_state - The driver device state
|
|
*
|
|
* cxl_dev_state represents the CXL driver/device state. It provides an
|
|
* interface to mailbox commands as well as some cached data about the device.
|
|
* Currently only memory devices are represented.
|
|
*
|
|
* @dev: The device associated with this CXL state
|
|
* @regs: Parsed register blocks
|
|
* @cxl_dvsec: Offset to the PCIe device DVSEC
|
|
* @payload_size: Size of space for payload
|
|
* (CXL 2.0 8.2.8.4.3 Mailbox Capabilities Register)
|
|
* @lsa_size: Size of Label Storage Area
|
|
* (CXL 2.0 8.2.9.5.1.1 Identify Memory Device)
|
|
* @mbox_mutex: Mutex to synchronize mailbox access.
|
|
* @firmware_version: Firmware version for the memory device.
|
|
* @enabled_cmds: Hardware commands found enabled in CEL.
|
|
* @exclusive_cmds: Commands that are kernel-internal only
|
|
* @dpa_res: Overall DPA resource tree for the device
|
|
* @pmem_res: Active Persistent memory capacity configuration
|
|
* @ram_res: Active Volatile memory capacity configuration
|
|
* @total_bytes: sum of all possible capacities
|
|
* @volatile_only_bytes: hard volatile capacity
|
|
* @persistent_only_bytes: hard persistent capacity
|
|
* @partition_align_bytes: alignment size for partition-able capacity
|
|
* @active_volatile_bytes: sum of hard + soft volatile
|
|
* @active_persistent_bytes: sum of hard + soft persistent
|
|
* @next_volatile_bytes: volatile capacity change pending device reset
|
|
* @next_persistent_bytes: persistent capacity change pending device reset
|
|
* @component_reg_phys: register base of component registers
|
|
* @info: Cached DVSEC information about the device.
|
|
* @serial: PCIe Device Serial Number
|
|
* @doe_mbs: PCI DOE mailbox array
|
|
* @mbox_send: @dev specific transport for transmitting mailbox commands
|
|
*
|
|
* See section 8.2.9.5.2 Capacity Configuration and Label Storage for
|
|
* details on capacity parameters.
|
|
*/
|
|
struct cxl_dev_state {
|
|
struct device *dev;
|
|
|
|
struct cxl_regs regs;
|
|
int cxl_dvsec;
|
|
|
|
size_t payload_size;
|
|
size_t lsa_size;
|
|
struct mutex mbox_mutex; /* Protects device mailbox and firmware */
|
|
char firmware_version[0x10];
|
|
DECLARE_BITMAP(enabled_cmds, CXL_MEM_COMMAND_ID_MAX);
|
|
DECLARE_BITMAP(exclusive_cmds, CXL_MEM_COMMAND_ID_MAX);
|
|
|
|
struct resource dpa_res;
|
|
struct resource pmem_res;
|
|
struct resource ram_res;
|
|
u64 total_bytes;
|
|
u64 volatile_only_bytes;
|
|
u64 persistent_only_bytes;
|
|
u64 partition_align_bytes;
|
|
|
|
u64 active_volatile_bytes;
|
|
u64 active_persistent_bytes;
|
|
u64 next_volatile_bytes;
|
|
u64 next_persistent_bytes;
|
|
|
|
resource_size_t component_reg_phys;
|
|
u64 serial;
|
|
|
|
struct xarray doe_mbs;
|
|
|
|
int (*mbox_send)(struct cxl_dev_state *cxlds, struct cxl_mbox_cmd *cmd);
|
|
};
|
|
|
|
enum cxl_opcode {
|
|
CXL_MBOX_OP_INVALID = 0x0000,
|
|
CXL_MBOX_OP_RAW = CXL_MBOX_OP_INVALID,
|
|
CXL_MBOX_OP_GET_FW_INFO = 0x0200,
|
|
CXL_MBOX_OP_ACTIVATE_FW = 0x0202,
|
|
CXL_MBOX_OP_GET_SUPPORTED_LOGS = 0x0400,
|
|
CXL_MBOX_OP_GET_LOG = 0x0401,
|
|
CXL_MBOX_OP_IDENTIFY = 0x4000,
|
|
CXL_MBOX_OP_GET_PARTITION_INFO = 0x4100,
|
|
CXL_MBOX_OP_SET_PARTITION_INFO = 0x4101,
|
|
CXL_MBOX_OP_GET_LSA = 0x4102,
|
|
CXL_MBOX_OP_SET_LSA = 0x4103,
|
|
CXL_MBOX_OP_GET_HEALTH_INFO = 0x4200,
|
|
CXL_MBOX_OP_GET_ALERT_CONFIG = 0x4201,
|
|
CXL_MBOX_OP_SET_ALERT_CONFIG = 0x4202,
|
|
CXL_MBOX_OP_GET_SHUTDOWN_STATE = 0x4203,
|
|
CXL_MBOX_OP_SET_SHUTDOWN_STATE = 0x4204,
|
|
CXL_MBOX_OP_GET_POISON = 0x4300,
|
|
CXL_MBOX_OP_INJECT_POISON = 0x4301,
|
|
CXL_MBOX_OP_CLEAR_POISON = 0x4302,
|
|
CXL_MBOX_OP_GET_SCAN_MEDIA_CAPS = 0x4303,
|
|
CXL_MBOX_OP_SCAN_MEDIA = 0x4304,
|
|
CXL_MBOX_OP_GET_SCAN_MEDIA = 0x4305,
|
|
CXL_MBOX_OP_MAX = 0x10000
|
|
};
|
|
|
|
#define DEFINE_CXL_CEL_UUID \
|
|
UUID_INIT(0xda9c0b5, 0xbf41, 0x4b78, 0x8f, 0x79, 0x96, 0xb1, 0x62, \
|
|
0x3b, 0x3f, 0x17)
|
|
|
|
#define DEFINE_CXL_VENDOR_DEBUG_UUID \
|
|
UUID_INIT(0xe1819d9, 0x11a9, 0x400c, 0x81, 0x1f, 0xd6, 0x07, 0x19, \
|
|
0x40, 0x3d, 0x86)
|
|
|
|
struct cxl_mbox_get_supported_logs {
|
|
__le16 entries;
|
|
u8 rsvd[6];
|
|
struct cxl_gsl_entry {
|
|
uuid_t uuid;
|
|
__le32 size;
|
|
} __packed entry[];
|
|
} __packed;
|
|
|
|
struct cxl_cel_entry {
|
|
__le16 opcode;
|
|
__le16 effect;
|
|
} __packed;
|
|
|
|
struct cxl_mbox_get_log {
|
|
uuid_t uuid;
|
|
__le32 offset;
|
|
__le32 length;
|
|
} __packed;
|
|
|
|
/* See CXL 2.0 Table 175 Identify Memory Device Output Payload */
|
|
struct cxl_mbox_identify {
|
|
char fw_revision[0x10];
|
|
__le64 total_capacity;
|
|
__le64 volatile_capacity;
|
|
__le64 persistent_capacity;
|
|
__le64 partition_align;
|
|
__le16 info_event_log_size;
|
|
__le16 warning_event_log_size;
|
|
__le16 failure_event_log_size;
|
|
__le16 fatal_event_log_size;
|
|
__le32 lsa_size;
|
|
u8 poison_list_max_mer[3];
|
|
__le16 inject_poison_limit;
|
|
u8 poison_caps;
|
|
u8 qos_telemetry_caps;
|
|
} __packed;
|
|
|
|
struct cxl_mbox_get_partition_info {
|
|
__le64 active_volatile_cap;
|
|
__le64 active_persistent_cap;
|
|
__le64 next_volatile_cap;
|
|
__le64 next_persistent_cap;
|
|
} __packed;
|
|
|
|
struct cxl_mbox_get_lsa {
|
|
__le32 offset;
|
|
__le32 length;
|
|
} __packed;
|
|
|
|
struct cxl_mbox_set_lsa {
|
|
__le32 offset;
|
|
__le32 reserved;
|
|
u8 data[];
|
|
} __packed;
|
|
|
|
struct cxl_mbox_set_partition_info {
|
|
__le64 volatile_capacity;
|
|
u8 flags;
|
|
} __packed;
|
|
|
|
#define CXL_SET_PARTITION_IMMEDIATE_FLAG BIT(0)
|
|
|
|
/**
|
|
* struct cxl_mem_command - Driver representation of a memory device command
|
|
* @info: Command information as it exists for the UAPI
|
|
* @opcode: The actual bits used for the mailbox protocol
|
|
* @flags: Set of flags effecting driver behavior.
|
|
*
|
|
* * %CXL_CMD_FLAG_FORCE_ENABLE: In cases of error, commands with this flag
|
|
* will be enabled by the driver regardless of what hardware may have
|
|
* advertised.
|
|
*
|
|
* The cxl_mem_command is the driver's internal representation of commands that
|
|
* are supported by the driver. Some of these commands may not be supported by
|
|
* the hardware. The driver will use @info to validate the fields passed in by
|
|
* the user then submit the @opcode to the hardware.
|
|
*
|
|
* See struct cxl_command_info.
|
|
*/
|
|
struct cxl_mem_command {
|
|
struct cxl_command_info info;
|
|
enum cxl_opcode opcode;
|
|
u32 flags;
|
|
#define CXL_CMD_FLAG_NONE 0
|
|
#define CXL_CMD_FLAG_FORCE_ENABLE BIT(0)
|
|
};
|
|
|
|
int cxl_mbox_send_cmd(struct cxl_dev_state *cxlds, u16 opcode, void *in,
|
|
size_t in_size, void *out, size_t out_size);
|
|
int cxl_dev_state_identify(struct cxl_dev_state *cxlds);
|
|
int cxl_await_media_ready(struct cxl_dev_state *cxlds);
|
|
int cxl_enumerate_cmds(struct cxl_dev_state *cxlds);
|
|
int cxl_mem_create_range_info(struct cxl_dev_state *cxlds);
|
|
struct cxl_dev_state *cxl_dev_state_create(struct device *dev);
|
|
void set_exclusive_cxl_commands(struct cxl_dev_state *cxlds, unsigned long *cmds);
|
|
void clear_exclusive_cxl_commands(struct cxl_dev_state *cxlds, unsigned long *cmds);
|
|
#ifdef CONFIG_CXL_SUSPEND
|
|
void cxl_mem_active_inc(void);
|
|
void cxl_mem_active_dec(void);
|
|
#else
|
|
static inline void cxl_mem_active_inc(void)
|
|
{
|
|
}
|
|
static inline void cxl_mem_active_dec(void)
|
|
{
|
|
}
|
|
#endif
|
|
|
|
struct cxl_hdm {
|
|
struct cxl_component_regs regs;
|
|
unsigned int decoder_count;
|
|
unsigned int target_count;
|
|
unsigned int interleave_mask;
|
|
struct cxl_port *port;
|
|
};
|
|
|
|
struct seq_file;
|
|
struct dentry *cxl_debugfs_create_dir(const char *dir);
|
|
void cxl_dpa_debug(struct seq_file *file, struct cxl_dev_state *cxlds);
|
|
#endif /* __CXL_MEM_H__ */
|