385 lines
11 KiB
C
385 lines
11 KiB
C
/*
|
|
* Marvell camera core structures.
|
|
*
|
|
* Copyright 2011 Jonathan Corbet corbet@lwn.net
|
|
*/
|
|
#ifndef _MCAM_CORE_H
|
|
#define _MCAM_CORE_H
|
|
|
|
#include <linux/list.h>
|
|
#include <media/v4l2-common.h>
|
|
#include <media/v4l2-ctrls.h>
|
|
#include <media/v4l2-dev.h>
|
|
#include <media/videobuf2-core.h>
|
|
|
|
/*
|
|
* Create our own symbols for the supported buffer modes, but, for now,
|
|
* base them entirely on which videobuf2 options have been selected.
|
|
*/
|
|
#if IS_ENABLED(CONFIG_VIDEOBUF2_VMALLOC)
|
|
#define MCAM_MODE_VMALLOC 1
|
|
#endif
|
|
|
|
#if IS_ENABLED(CONFIG_VIDEOBUF2_DMA_CONTIG)
|
|
#define MCAM_MODE_DMA_CONTIG 1
|
|
#endif
|
|
|
|
#if IS_ENABLED(CONFIG_VIDEOBUF2_DMA_SG)
|
|
#define MCAM_MODE_DMA_SG 1
|
|
#endif
|
|
|
|
#if !defined(MCAM_MODE_VMALLOC) && !defined(MCAM_MODE_DMA_CONTIG) && \
|
|
!defined(MCAM_MODE_DMA_SG)
|
|
#error One of the videobuf buffer modes must be selected in the config
|
|
#endif
|
|
|
|
|
|
enum mcam_state {
|
|
S_NOTREADY, /* Not yet initialized */
|
|
S_IDLE, /* Just hanging around */
|
|
S_FLAKED, /* Some sort of problem */
|
|
S_STREAMING, /* Streaming data */
|
|
S_BUFWAIT /* streaming requested but no buffers yet */
|
|
};
|
|
#define MAX_DMA_BUFS 3
|
|
|
|
/*
|
|
* Different platforms work best with different buffer modes, so we
|
|
* let the platform pick.
|
|
*/
|
|
enum mcam_buffer_mode {
|
|
B_vmalloc = 0,
|
|
B_DMA_contig = 1,
|
|
B_DMA_sg = 2
|
|
};
|
|
|
|
enum mcam_chip_id {
|
|
MCAM_CAFE,
|
|
MCAM_ARMADA610,
|
|
};
|
|
|
|
/*
|
|
* Is a given buffer mode supported by the current kernel configuration?
|
|
*/
|
|
static inline int mcam_buffer_mode_supported(enum mcam_buffer_mode mode)
|
|
{
|
|
switch (mode) {
|
|
#ifdef MCAM_MODE_VMALLOC
|
|
case B_vmalloc:
|
|
#endif
|
|
#ifdef MCAM_MODE_DMA_CONTIG
|
|
case B_DMA_contig:
|
|
#endif
|
|
#ifdef MCAM_MODE_DMA_SG
|
|
case B_DMA_sg:
|
|
#endif
|
|
return 1;
|
|
default:
|
|
return 0;
|
|
}
|
|
}
|
|
|
|
/*
|
|
* Basic frame states
|
|
*/
|
|
struct mcam_frame_state {
|
|
unsigned int frames;
|
|
unsigned int singles;
|
|
unsigned int delivered;
|
|
};
|
|
|
|
#define NR_MCAM_CLK 3
|
|
|
|
/*
|
|
* A description of one of our devices.
|
|
* Locking: controlled by s_mutex. Certain fields, however, require
|
|
* the dev_lock spinlock; they are marked as such by comments.
|
|
* dev_lock is also required for access to device registers.
|
|
*/
|
|
struct mcam_camera {
|
|
/*
|
|
* These fields should be set by the platform code prior to
|
|
* calling mcam_register().
|
|
*/
|
|
struct i2c_adapter *i2c_adapter;
|
|
unsigned char __iomem *regs;
|
|
unsigned regs_size; /* size in bytes of the register space */
|
|
spinlock_t dev_lock;
|
|
struct device *dev; /* For messages, dma alloc */
|
|
enum mcam_chip_id chip_id;
|
|
short int clock_speed; /* Sensor clock speed, default 30 */
|
|
short int use_smbus; /* SMBUS or straight I2c? */
|
|
enum mcam_buffer_mode buffer_mode;
|
|
|
|
int mclk_min; /* The minimal value of mclk */
|
|
int mclk_src; /* which clock source the mclk derives from */
|
|
int mclk_div; /* Clock Divider Value for MCLK */
|
|
|
|
int ccic_id;
|
|
enum v4l2_mbus_type bus_type;
|
|
/* MIPI support */
|
|
/* The dphy config value, allocated in board file
|
|
* dphy[0]: DPHY3
|
|
* dphy[1]: DPHY5
|
|
* dphy[2]: DPHY6
|
|
*/
|
|
int *dphy;
|
|
bool mipi_enabled; /* flag whether mipi is enabled already */
|
|
int lane; /* lane number */
|
|
|
|
/* clock tree support */
|
|
struct clk *clk[NR_MCAM_CLK];
|
|
|
|
/*
|
|
* Callbacks from the core to the platform code.
|
|
*/
|
|
int (*plat_power_up) (struct mcam_camera *cam);
|
|
void (*plat_power_down) (struct mcam_camera *cam);
|
|
void (*calc_dphy) (struct mcam_camera *cam);
|
|
void (*ctlr_reset) (struct mcam_camera *cam);
|
|
|
|
/*
|
|
* Everything below here is private to the mcam core and
|
|
* should not be touched by the platform code.
|
|
*/
|
|
struct v4l2_device v4l2_dev;
|
|
struct v4l2_ctrl_handler ctrl_handler;
|
|
enum mcam_state state;
|
|
unsigned long flags; /* Buffer status, mainly (dev_lock) */
|
|
|
|
struct mcam_frame_state frame_state; /* Frame state counter */
|
|
/*
|
|
* Subsystem structures.
|
|
*/
|
|
struct video_device vdev;
|
|
struct v4l2_subdev *sensor;
|
|
unsigned short sensor_addr;
|
|
|
|
/* Videobuf2 stuff */
|
|
struct vb2_queue vb_queue;
|
|
struct list_head buffers; /* Available frames */
|
|
|
|
unsigned int nbufs; /* How many are alloc'd */
|
|
int next_buf; /* Next to consume (dev_lock) */
|
|
|
|
char bus_info[32]; /* querycap bus_info */
|
|
|
|
/* DMA buffers - vmalloc mode */
|
|
#ifdef MCAM_MODE_VMALLOC
|
|
unsigned int dma_buf_size; /* allocated size */
|
|
void *dma_bufs[MAX_DMA_BUFS]; /* Internal buffer addresses */
|
|
dma_addr_t dma_handles[MAX_DMA_BUFS]; /* Buffer bus addresses */
|
|
struct tasklet_struct s_tasklet;
|
|
#endif
|
|
unsigned int sequence; /* Frame sequence number */
|
|
unsigned int buf_seq[MAX_DMA_BUFS]; /* Sequence for individual bufs */
|
|
|
|
/* DMA buffers - DMA modes */
|
|
struct mcam_vb_buffer *vb_bufs[MAX_DMA_BUFS];
|
|
struct vb2_alloc_ctx *vb_alloc_ctx;
|
|
struct vb2_alloc_ctx *vb_alloc_ctx_sg;
|
|
|
|
/* Mode-specific ops, set at open time */
|
|
void (*dma_setup)(struct mcam_camera *cam);
|
|
void (*frame_complete)(struct mcam_camera *cam, int frame);
|
|
|
|
/* Current operating parameters */
|
|
struct v4l2_pix_format pix_format;
|
|
u32 mbus_code;
|
|
|
|
/* Locks */
|
|
struct mutex s_mutex; /* Access to this structure */
|
|
};
|
|
|
|
|
|
/*
|
|
* Register I/O functions. These are here because the platform code
|
|
* may legitimately need to mess with the register space.
|
|
*/
|
|
/*
|
|
* Device register I/O
|
|
*/
|
|
static inline void mcam_reg_write(struct mcam_camera *cam, unsigned int reg,
|
|
unsigned int val)
|
|
{
|
|
iowrite32(val, cam->regs + reg);
|
|
}
|
|
|
|
static inline unsigned int mcam_reg_read(struct mcam_camera *cam,
|
|
unsigned int reg)
|
|
{
|
|
return ioread32(cam->regs + reg);
|
|
}
|
|
|
|
|
|
static inline void mcam_reg_write_mask(struct mcam_camera *cam, unsigned int reg,
|
|
unsigned int val, unsigned int mask)
|
|
{
|
|
unsigned int v = mcam_reg_read(cam, reg);
|
|
|
|
v = (v & ~mask) | (val & mask);
|
|
mcam_reg_write(cam, reg, v);
|
|
}
|
|
|
|
static inline void mcam_reg_clear_bit(struct mcam_camera *cam,
|
|
unsigned int reg, unsigned int val)
|
|
{
|
|
mcam_reg_write_mask(cam, reg, 0, val);
|
|
}
|
|
|
|
static inline void mcam_reg_set_bit(struct mcam_camera *cam,
|
|
unsigned int reg, unsigned int val)
|
|
{
|
|
mcam_reg_write_mask(cam, reg, val, val);
|
|
}
|
|
|
|
/*
|
|
* Functions for use by platform code.
|
|
*/
|
|
int mccic_register(struct mcam_camera *cam);
|
|
int mccic_irq(struct mcam_camera *cam, unsigned int irqs);
|
|
void mccic_shutdown(struct mcam_camera *cam);
|
|
#ifdef CONFIG_PM
|
|
void mccic_suspend(struct mcam_camera *cam);
|
|
int mccic_resume(struct mcam_camera *cam);
|
|
#endif
|
|
|
|
/*
|
|
* Register definitions for the m88alp01 camera interface. Offsets in bytes
|
|
* as given in the spec.
|
|
*/
|
|
#define REG_Y0BAR 0x00
|
|
#define REG_Y1BAR 0x04
|
|
#define REG_Y2BAR 0x08
|
|
#define REG_U0BAR 0x0c
|
|
#define REG_U1BAR 0x10
|
|
#define REG_U2BAR 0x14
|
|
#define REG_V0BAR 0x18
|
|
#define REG_V1BAR 0x1C
|
|
#define REG_V2BAR 0x20
|
|
|
|
/*
|
|
* register definitions for MIPI support
|
|
*/
|
|
#define REG_CSI2_CTRL0 0x100
|
|
#define CSI2_C0_MIPI_EN (0x1 << 0)
|
|
#define CSI2_C0_ACT_LANE(n) ((n-1) << 1)
|
|
#define REG_CSI2_DPHY3 0x12c
|
|
#define REG_CSI2_DPHY5 0x134
|
|
#define REG_CSI2_DPHY6 0x138
|
|
|
|
/* ... */
|
|
|
|
#define REG_IMGPITCH 0x24 /* Image pitch register */
|
|
#define IMGP_YP_SHFT 2 /* Y pitch params */
|
|
#define IMGP_YP_MASK 0x00003ffc /* Y pitch field */
|
|
#define IMGP_UVP_SHFT 18 /* UV pitch (planar) */
|
|
#define IMGP_UVP_MASK 0x3ffc0000
|
|
#define REG_IRQSTATRAW 0x28 /* RAW IRQ Status */
|
|
#define IRQ_EOF0 0x00000001 /* End of frame 0 */
|
|
#define IRQ_EOF1 0x00000002 /* End of frame 1 */
|
|
#define IRQ_EOF2 0x00000004 /* End of frame 2 */
|
|
#define IRQ_SOF0 0x00000008 /* Start of frame 0 */
|
|
#define IRQ_SOF1 0x00000010 /* Start of frame 1 */
|
|
#define IRQ_SOF2 0x00000020 /* Start of frame 2 */
|
|
#define IRQ_OVERFLOW 0x00000040 /* FIFO overflow */
|
|
#define IRQ_TWSIW 0x00010000 /* TWSI (smbus) write */
|
|
#define IRQ_TWSIR 0x00020000 /* TWSI read */
|
|
#define IRQ_TWSIE 0x00040000 /* TWSI error */
|
|
#define TWSIIRQS (IRQ_TWSIW|IRQ_TWSIR|IRQ_TWSIE)
|
|
#define FRAMEIRQS (IRQ_EOF0|IRQ_EOF1|IRQ_EOF2|IRQ_SOF0|IRQ_SOF1|IRQ_SOF2)
|
|
#define ALLIRQS (TWSIIRQS|FRAMEIRQS|IRQ_OVERFLOW)
|
|
#define REG_IRQMASK 0x2c /* IRQ mask - same bits as IRQSTAT */
|
|
#define REG_IRQSTAT 0x30 /* IRQ status / clear */
|
|
|
|
#define REG_IMGSIZE 0x34 /* Image size */
|
|
#define IMGSZ_V_MASK 0x1fff0000
|
|
#define IMGSZ_V_SHIFT 16
|
|
#define IMGSZ_H_MASK 0x00003fff
|
|
#define REG_IMGOFFSET 0x38 /* IMage offset */
|
|
|
|
#define REG_CTRL0 0x3c /* Control 0 */
|
|
#define C0_ENABLE 0x00000001 /* Makes the whole thing go */
|
|
|
|
/* Mask for all the format bits */
|
|
#define C0_DF_MASK 0x00fffffc /* Bits 2-23 */
|
|
|
|
/* RGB ordering */
|
|
#define C0_RGB4_RGBX 0x00000000
|
|
#define C0_RGB4_XRGB 0x00000004
|
|
#define C0_RGB4_BGRX 0x00000008
|
|
#define C0_RGB4_XBGR 0x0000000c
|
|
#define C0_RGB5_RGGB 0x00000000
|
|
#define C0_RGB5_GRBG 0x00000004
|
|
#define C0_RGB5_GBRG 0x00000008
|
|
#define C0_RGB5_BGGR 0x0000000c
|
|
|
|
/* Spec has two fields for DIN and DOUT, but they must match, so
|
|
combine them here. */
|
|
#define C0_DF_YUV 0x00000000 /* Data is YUV */
|
|
#define C0_DF_RGB 0x000000a0 /* ... RGB */
|
|
#define C0_DF_BAYER 0x00000140 /* ... Bayer */
|
|
/* 8-8-8 must be missing from the below - ask */
|
|
#define C0_RGBF_565 0x00000000
|
|
#define C0_RGBF_444 0x00000800
|
|
#define C0_RGB_BGR 0x00001000 /* Blue comes first */
|
|
#define C0_YUV_PLANAR 0x00000000 /* YUV 422 planar format */
|
|
#define C0_YUV_PACKED 0x00008000 /* YUV 422 packed */
|
|
#define C0_YUV_420PL 0x0000a000 /* YUV 420 planar */
|
|
/* Think that 420 packed must be 111 - ask */
|
|
#define C0_YUVE_YUYV 0x00000000 /* Y1CbY0Cr */
|
|
#define C0_YUVE_YVYU 0x00010000 /* Y1CrY0Cb */
|
|
#define C0_YUVE_VYUY 0x00020000 /* CrY1CbY0 */
|
|
#define C0_YUVE_UYVY 0x00030000 /* CbY1CrY0 */
|
|
#define C0_YUVE_NOSWAP 0x00000000 /* no bytes swapping */
|
|
#define C0_YUVE_SWAP13 0x00010000 /* swap byte 1 and 3 */
|
|
#define C0_YUVE_SWAP24 0x00020000 /* swap byte 2 and 4 */
|
|
#define C0_YUVE_SWAP1324 0x00030000 /* swap bytes 1&3 and 2&4 */
|
|
/* Bayer bits 18,19 if needed */
|
|
#define C0_EOF_VSYNC 0x00400000 /* Generate EOF by VSYNC */
|
|
#define C0_VEDGE_CTRL 0x00800000 /* Detect falling edge of VSYNC */
|
|
#define C0_HPOL_LOW 0x01000000 /* HSYNC polarity active low */
|
|
#define C0_VPOL_LOW 0x02000000 /* VSYNC polarity active low */
|
|
#define C0_VCLK_LOW 0x04000000 /* VCLK on falling edge */
|
|
#define C0_DOWNSCALE 0x08000000 /* Enable downscaler */
|
|
/* SIFMODE */
|
|
#define C0_SIF_HVSYNC 0x00000000 /* Use H/VSYNC */
|
|
#define C0_SOF_NOSYNC 0x40000000 /* Use inband active signaling */
|
|
#define C0_SIFM_MASK 0xc0000000 /* SIF mode bits */
|
|
|
|
/* Bits below C1_444ALPHA are not present in Cafe */
|
|
#define REG_CTRL1 0x40 /* Control 1 */
|
|
#define C1_CLKGATE 0x00000001 /* Sensor clock gate */
|
|
#define C1_DESC_ENA 0x00000100 /* DMA descriptor enable */
|
|
#define C1_DESC_3WORD 0x00000200 /* Three-word descriptors used */
|
|
#define C1_444ALPHA 0x00f00000 /* Alpha field in RGB444 */
|
|
#define C1_ALPHA_SHFT 20
|
|
#define C1_DMAB32 0x00000000 /* 32-byte DMA burst */
|
|
#define C1_DMAB16 0x02000000 /* 16-byte DMA burst */
|
|
#define C1_DMAB64 0x04000000 /* 64-byte DMA burst */
|
|
#define C1_DMAB_MASK 0x06000000
|
|
#define C1_TWOBUFS 0x08000000 /* Use only two DMA buffers */
|
|
#define C1_PWRDWN 0x10000000 /* Power down */
|
|
|
|
#define REG_CLKCTRL 0x88 /* Clock control */
|
|
#define CLK_DIV_MASK 0x0000ffff /* Upper bits RW "reserved" */
|
|
|
|
/* This appears to be a Cafe-only register */
|
|
#define REG_UBAR 0xc4 /* Upper base address register */
|
|
|
|
/* Armada 610 DMA descriptor registers */
|
|
#define REG_DMA_DESC_Y 0x200
|
|
#define REG_DMA_DESC_U 0x204
|
|
#define REG_DMA_DESC_V 0x208
|
|
#define REG_DESC_LEN_Y 0x20c /* Lengths are in bytes */
|
|
#define REG_DESC_LEN_U 0x210
|
|
#define REG_DESC_LEN_V 0x214
|
|
|
|
/*
|
|
* Useful stuff that probably belongs somewhere global.
|
|
*/
|
|
#define VGA_WIDTH 640
|
|
#define VGA_HEIGHT 480
|
|
|
|
#endif /* _MCAM_CORE_H */
|