OpenCloudOS-Kernel/arch/arm/mach-omap2/Kconfig

280 lines
6.7 KiB
Plaintext

# SPDX-License-Identifier: GPL-2.0-only
menu "TI OMAP/AM/DM/DRA Family"
depends on ARCH_MULTI_V6 || ARCH_MULTI_V7
config OMAP_HWMOD
bool
config ARCH_OMAP2
bool "TI OMAP2"
depends on ARCH_MULTI_V6
select ARCH_OMAP2PLUS
select CPU_V6
select OMAP_HWMOD
select SOC_HAS_OMAP2_SDRC
config ARCH_OMAP3
bool "TI OMAP3"
depends on ARCH_MULTI_V7
select ARCH_OMAP2PLUS
select ARM_CPU_SUSPEND
select OMAP_HWMOD
select OMAP_INTERCONNECT
select PM_OPP
select SOC_HAS_OMAP2_SDRC
select ARM_ERRATA_430973
config ARCH_OMAP4
bool "TI OMAP4"
depends on ARCH_MULTI_V7
select ARCH_OMAP2PLUS
select ARCH_NEEDS_CPU_IDLE_COUPLED if SMP
select ARM_CPU_SUSPEND
select ARM_ERRATA_720789
select ARM_GIC
select HAVE_ARM_SCU if SMP
select HAVE_ARM_TWD if SMP
select OMAP_INTERCONNECT
select OMAP_INTERCONNECT_BARRIER
select PL310_ERRATA_588369 if CACHE_L2X0
select PL310_ERRATA_727915 if CACHE_L2X0
select PM_OPP
select PM if CPU_IDLE
select ARM_ERRATA_754322
select ARM_ERRATA_775420
select OMAP_INTERCONNECT
config SOC_OMAP5
bool "TI OMAP5"
depends on ARCH_MULTI_V7
select ARCH_OMAP2PLUS
select ARM_CPU_SUSPEND
select ARM_GIC
select HAVE_ARM_SCU if SMP
select HAVE_ARM_ARCH_TIMER
select ARM_ERRATA_798181 if SMP
select OMAP_INTERCONNECT
select OMAP_INTERCONNECT_BARRIER
select PM_OPP
select ZONE_DMA if ARM_LPAE
config SOC_AM33XX
bool "TI AM33XX"
depends on ARCH_MULTI_V7
select ARCH_OMAP2PLUS
select ARM_CPU_SUSPEND
config SOC_AM43XX
bool "TI AM43x"
depends on ARCH_MULTI_V7
select ARCH_OMAP2PLUS
select ARM_GIC
select MACH_OMAP_GENERIC
select HAVE_ARM_SCU
select GENERIC_CLOCKEVENTS_BROADCAST
select HAVE_ARM_TWD
select ARM_ERRATA_754322
select ARM_ERRATA_775420
select OMAP_INTERCONNECT
select ARM_CPU_SUSPEND
config SOC_DRA7XX
bool "TI DRA7XX"
depends on ARCH_MULTI_V7
select ARCH_OMAP2PLUS
select ARM_CPU_SUSPEND
select ARM_GIC
select HAVE_ARM_SCU if SMP
select HAVE_ARM_ARCH_TIMER
select IRQ_CROSSBAR
select ARM_ERRATA_798181 if SMP
select OMAP_INTERCONNECT
select OMAP_INTERCONNECT_BARRIER
select PM_OPP
select ZONE_DMA if ARM_LPAE
select PINCTRL_TI_IODELAY if OF && PINCTRL
config ARCH_OMAP2PLUS
bool
select ARCH_HAS_BANDGAP
select ARCH_HAS_RESET_CONTROLLER
select ARCH_OMAP
select CLKSRC_MMIO
select GENERIC_IRQ_CHIP
select GPIOLIB
select MACH_OMAP_GENERIC
select MEMORY
select MFD_SYSCON
select OMAP_DM_TIMER
select OMAP_GPMC
select PINCTRL
select PM
select PM_GENERIC_DOMAINS
select PM_GENERIC_DOMAINS_OF
select RESET_CONTROLLER
select SOC_BUS
select TI_SYSC
select OMAP_IRQCHIP
select CLKSRC_TI_32K
help
Systems based on OMAP2, OMAP3, OMAP4 or OMAP5
config OMAP_INTERCONNECT_BARRIER
bool
select ARM_HEAVY_MB
config ARCH_OMAP
bool
if ARCH_OMAP2PLUS
menu "TI OMAP2/3/4 Specific Features"
config ARCH_OMAP2PLUS_TYPICAL
bool "Typical OMAP configuration"
default y
select AEABI
select HIGHMEM
select I2C
select I2C_OMAP
select MENELAUS if ARCH_OMAP2
select NEON if CPU_V7
select REGULATOR
select REGULATOR_FIXED_VOLTAGE
select TWL4030_CORE if ARCH_OMAP3 || ARCH_OMAP4
select TWL4030_POWER if ARCH_OMAP3 || ARCH_OMAP4
select VFP
help
Compile a kernel suitable for booting most boards
config SOC_HAS_OMAP2_SDRC
bool "OMAP2 SDRAM Controller support"
config SOC_HAS_REALTIME_COUNTER
bool "Real time free running counter"
depends on SOC_OMAP5 || SOC_DRA7XX
default y
config POWER_AVS_OMAP
bool "AVS(Adaptive Voltage Scaling) support for OMAP IP versions 1&2"
depends on (ARCH_OMAP3 || ARCH_OMAP4) && PM
select POWER_SUPPLY
help
Say Y to enable AVS(Adaptive Voltage Scaling)
support on OMAP containing the version 1 or
version 2 of the SmartReflex IP.
V1 is the 65nm version used in OMAP3430.
V2 is the update for the 45nm version of the IP used in OMAP3630
and OMAP4430
Please note, that by default SmartReflex is only
initialized and not enabled. To enable the automatic voltage
compensation for vdd mpu and vdd core from user space,
user must write 1 to
/debug/smartreflex/sr_<X>/autocomp,
where X is mpu_iva or core for OMAP3.
Optionally autocompensation can be enabled in the kernel
by default during system init via the enable_on_init flag
which an be passed as platform data to the smartreflex driver.
config POWER_AVS_OMAP_CLASS3
bool "Class 3 mode of Smartreflex Implementation"
depends on POWER_AVS_OMAP && TWL4030_CORE
help
Say Y to enable Class 3 implementation of Smartreflex
Class 3 implementation of Smartreflex employs continuous hardware
voltage calibration.
config OMAP3_L2_AUX_SECURE_SAVE_RESTORE
bool "OMAP3 HS/EMU save and restore for L2 AUX control register"
depends on ARCH_OMAP3 && PM
help
Without this option, L2 Auxiliary control register contents are
lost during off-mode entry on HS/EMU devices. This feature
requires support from PPA / boot-loader in HS/EMU devices, which
currently does not exist by default.
config OMAP3_L2_AUX_SECURE_SERVICE_SET_ID
int "Service ID for the support routine to set L2 AUX control"
depends on OMAP3_L2_AUX_SECURE_SAVE_RESTORE
default 43
help
PPA routine service ID for setting L2 auxiliary control register.
comment "OMAP Core Type"
depends on ARCH_OMAP2
config SOC_OMAP2420
bool "OMAP2420 support"
depends on ARCH_OMAP2
default y
select OMAP_DM_TIMER
select SOC_HAS_OMAP2_SDRC
config SOC_OMAP2430
bool "OMAP2430 support"
depends on ARCH_OMAP2
default y
select SOC_HAS_OMAP2_SDRC
config SOC_OMAP3430
bool "OMAP3430 support"
depends on ARCH_OMAP3
default y
select SOC_HAS_OMAP2_SDRC
config SOC_TI81XX
bool "TI81XX support"
depends on ARCH_OMAP3
default y
comment "OMAP Legacy Platform Data Board Type"
depends on ARCH_OMAP2PLUS
config MACH_OMAP_GENERIC
bool
config MACH_OMAP2_TUSB6010
bool
depends on ARCH_OMAP2 && SOC_OMAP2420
default y if MACH_NOKIA_N8X0
config MACH_NOKIA_N810
bool
config MACH_NOKIA_N810_WIMAX
bool
config MACH_NOKIA_N8X0
bool "Nokia N800/N810"
depends on SOC_OMAP2420
default y
select MACH_NOKIA_N810
select MACH_NOKIA_N810_WIMAX
config OMAP3_SDRC_AC_TIMING
bool "Enable SDRC AC timing register changes"
depends on ARCH_OMAP3
help
If you know that none of your system initiators will attempt to
access SDRAM during CORE DVFS, select Y here. This should boost
SDRAM performance at lower CORE OPPs. There are relatively few
users who will wish to say yes at this point - almost everyone will
wish to say no. Selecting yes without understanding what is
going on could result in system crashes;
endmenu
endif
config OMAP5_ERRATA_801819
bool "Errata 801819: An eviction from L1 data cache might stall indefinitely"
depends on SOC_OMAP5 || SOC_DRA7XX
help
A livelock can occur in the L2 cache arbitration that might prevent
a snoop from completing. Under certain conditions this can cause the
system to deadlock.
endmenu