1425 lines
37 KiB
C
1425 lines
37 KiB
C
// SPDX-License-Identifier: GPL-2.0+
|
|
/*
|
|
* Marvell 10G 88x3310 PHY driver
|
|
*
|
|
* Based upon the ID registers, this PHY appears to be a mixture of IPs
|
|
* from two different companies.
|
|
*
|
|
* There appears to be several different data paths through the PHY which
|
|
* are automatically managed by the PHY. The following has been determined
|
|
* via observation and experimentation for a setup using single-lane Serdes:
|
|
*
|
|
* SGMII PHYXS -- BASE-T PCS -- 10G PMA -- AN -- Copper (for <= 1G)
|
|
* 10GBASE-KR PHYXS -- BASE-T PCS -- 10G PMA -- AN -- Copper (for 10G)
|
|
* 10GBASE-KR PHYXS -- BASE-R PCS -- Fiber
|
|
*
|
|
* With XAUI, observation shows:
|
|
*
|
|
* XAUI PHYXS -- <appropriate PCS as above>
|
|
*
|
|
* and no switching of the host interface mode occurs.
|
|
*
|
|
* If both the fiber and copper ports are connected, the first to gain
|
|
* link takes priority and the other port is completely locked out.
|
|
*/
|
|
#include <linux/bitfield.h>
|
|
#include <linux/ctype.h>
|
|
#include <linux/delay.h>
|
|
#include <linux/hwmon.h>
|
|
#include <linux/marvell_phy.h>
|
|
#include <linux/phy.h>
|
|
#include <linux/sfp.h>
|
|
#include <linux/netdevice.h>
|
|
|
|
#define MV_PHY_ALASKA_NBT_QUIRK_MASK 0xfffffffe
|
|
#define MV_PHY_ALASKA_NBT_QUIRK_REV (MARVELL_PHY_ID_88X3310 | 0xa)
|
|
|
|
#define MV_VERSION(a,b,c,d) ((a) << 24 | (b) << 16 | (c) << 8 | (d))
|
|
|
|
enum {
|
|
MV_PMA_FW_VER0 = 0xc011,
|
|
MV_PMA_FW_VER1 = 0xc012,
|
|
MV_PMA_21X0_PORT_CTRL = 0xc04a,
|
|
MV_PMA_21X0_PORT_CTRL_SWRST = BIT(15),
|
|
MV_PMA_21X0_PORT_CTRL_MACTYPE_MASK = 0x7,
|
|
MV_PMA_21X0_PORT_CTRL_MACTYPE_USXGMII = 0x0,
|
|
MV_PMA_2180_PORT_CTRL_MACTYPE_DXGMII = 0x1,
|
|
MV_PMA_2180_PORT_CTRL_MACTYPE_QXGMII = 0x2,
|
|
MV_PMA_21X0_PORT_CTRL_MACTYPE_5GBASER = 0x4,
|
|
MV_PMA_21X0_PORT_CTRL_MACTYPE_5GBASER_NO_SGMII_AN = 0x5,
|
|
MV_PMA_21X0_PORT_CTRL_MACTYPE_10GBASER_RATE_MATCH = 0x6,
|
|
MV_PMA_BOOT = 0xc050,
|
|
MV_PMA_BOOT_FATAL = BIT(0),
|
|
|
|
MV_PCS_BASE_T = 0x0000,
|
|
MV_PCS_BASE_R = 0x1000,
|
|
MV_PCS_1000BASEX = 0x2000,
|
|
|
|
MV_PCS_CSCR1 = 0x8000,
|
|
MV_PCS_CSCR1_ED_MASK = 0x0300,
|
|
MV_PCS_CSCR1_ED_OFF = 0x0000,
|
|
MV_PCS_CSCR1_ED_RX = 0x0200,
|
|
MV_PCS_CSCR1_ED_NLP = 0x0300,
|
|
MV_PCS_CSCR1_MDIX_MASK = 0x0060,
|
|
MV_PCS_CSCR1_MDIX_MDI = 0x0000,
|
|
MV_PCS_CSCR1_MDIX_MDIX = 0x0020,
|
|
MV_PCS_CSCR1_MDIX_AUTO = 0x0060,
|
|
|
|
MV_PCS_DSC1 = 0x8003,
|
|
MV_PCS_DSC1_ENABLE = BIT(9),
|
|
MV_PCS_DSC1_10GBT = 0x01c0,
|
|
MV_PCS_DSC1_1GBR = 0x0038,
|
|
MV_PCS_DSC1_100BTX = 0x0007,
|
|
MV_PCS_DSC2 = 0x8004,
|
|
MV_PCS_DSC2_2P5G = 0xf000,
|
|
MV_PCS_DSC2_5G = 0x0f00,
|
|
|
|
MV_PCS_CSSR1 = 0x8008,
|
|
MV_PCS_CSSR1_SPD1_MASK = 0xc000,
|
|
MV_PCS_CSSR1_SPD1_SPD2 = 0xc000,
|
|
MV_PCS_CSSR1_SPD1_1000 = 0x8000,
|
|
MV_PCS_CSSR1_SPD1_100 = 0x4000,
|
|
MV_PCS_CSSR1_SPD1_10 = 0x0000,
|
|
MV_PCS_CSSR1_DUPLEX_FULL= BIT(13),
|
|
MV_PCS_CSSR1_RESOLVED = BIT(11),
|
|
MV_PCS_CSSR1_MDIX = BIT(6),
|
|
MV_PCS_CSSR1_SPD2_MASK = 0x000c,
|
|
MV_PCS_CSSR1_SPD2_5000 = 0x0008,
|
|
MV_PCS_CSSR1_SPD2_2500 = 0x0004,
|
|
MV_PCS_CSSR1_SPD2_10000 = 0x0000,
|
|
|
|
/* Temperature read register (88E2110 only) */
|
|
MV_PCS_TEMP = 0x8042,
|
|
|
|
/* Number of ports on the device */
|
|
MV_PCS_PORT_INFO = 0xd00d,
|
|
MV_PCS_PORT_INFO_NPORTS_MASK = 0x0380,
|
|
MV_PCS_PORT_INFO_NPORTS_SHIFT = 7,
|
|
|
|
/* SerDes reinitialization 88E21X0 */
|
|
MV_AN_21X0_SERDES_CTRL2 = 0x800f,
|
|
MV_AN_21X0_SERDES_CTRL2_AUTO_INIT_DIS = BIT(13),
|
|
MV_AN_21X0_SERDES_CTRL2_RUN_INIT = BIT(15),
|
|
|
|
/* These registers appear at 0x800X and 0xa00X - the 0xa00X control
|
|
* registers appear to set themselves to the 0x800X when AN is
|
|
* restarted, but status registers appear readable from either.
|
|
*/
|
|
MV_AN_CTRL1000 = 0x8000, /* 1000base-T control register */
|
|
MV_AN_STAT1000 = 0x8001, /* 1000base-T status register */
|
|
|
|
/* Vendor2 MMD registers */
|
|
MV_V2_PORT_CTRL = 0xf001,
|
|
MV_V2_PORT_CTRL_PWRDOWN = BIT(11),
|
|
MV_V2_33X0_PORT_CTRL_SWRST = BIT(15),
|
|
MV_V2_33X0_PORT_CTRL_MACTYPE_MASK = 0x7,
|
|
MV_V2_33X0_PORT_CTRL_MACTYPE_RXAUI = 0x0,
|
|
MV_V2_3310_PORT_CTRL_MACTYPE_XAUI_RATE_MATCH = 0x1,
|
|
MV_V2_3340_PORT_CTRL_MACTYPE_RXAUI_NO_SGMII_AN = 0x1,
|
|
MV_V2_33X0_PORT_CTRL_MACTYPE_RXAUI_RATE_MATCH = 0x2,
|
|
MV_V2_3310_PORT_CTRL_MACTYPE_XAUI = 0x3,
|
|
MV_V2_33X0_PORT_CTRL_MACTYPE_10GBASER = 0x4,
|
|
MV_V2_33X0_PORT_CTRL_MACTYPE_10GBASER_NO_SGMII_AN = 0x5,
|
|
MV_V2_33X0_PORT_CTRL_MACTYPE_10GBASER_RATE_MATCH = 0x6,
|
|
MV_V2_33X0_PORT_CTRL_MACTYPE_USXGMII = 0x7,
|
|
MV_V2_PORT_INTR_STS = 0xf040,
|
|
MV_V2_PORT_INTR_MASK = 0xf043,
|
|
MV_V2_PORT_INTR_STS_WOL_EN = BIT(8),
|
|
MV_V2_MAGIC_PKT_WORD0 = 0xf06b,
|
|
MV_V2_MAGIC_PKT_WORD1 = 0xf06c,
|
|
MV_V2_MAGIC_PKT_WORD2 = 0xf06d,
|
|
/* Wake on LAN registers */
|
|
MV_V2_WOL_CTRL = 0xf06e,
|
|
MV_V2_WOL_CTRL_CLEAR_STS = BIT(15),
|
|
MV_V2_WOL_CTRL_MAGIC_PKT_EN = BIT(0),
|
|
/* Temperature control/read registers (88X3310 only) */
|
|
MV_V2_TEMP_CTRL = 0xf08a,
|
|
MV_V2_TEMP_CTRL_MASK = 0xc000,
|
|
MV_V2_TEMP_CTRL_SAMPLE = 0x0000,
|
|
MV_V2_TEMP_CTRL_DISABLE = 0xc000,
|
|
MV_V2_TEMP = 0xf08c,
|
|
MV_V2_TEMP_UNKNOWN = 0x9600, /* unknown function */
|
|
};
|
|
|
|
struct mv3310_chip {
|
|
bool (*has_downshift)(struct phy_device *phydev);
|
|
void (*init_supported_interfaces)(unsigned long *mask);
|
|
int (*get_mactype)(struct phy_device *phydev);
|
|
int (*set_mactype)(struct phy_device *phydev, int mactype);
|
|
int (*select_mactype)(unsigned long *interfaces);
|
|
int (*init_interface)(struct phy_device *phydev, int mactype);
|
|
|
|
#ifdef CONFIG_HWMON
|
|
int (*hwmon_read_temp_reg)(struct phy_device *phydev);
|
|
#endif
|
|
};
|
|
|
|
struct mv3310_priv {
|
|
DECLARE_BITMAP(supported_interfaces, PHY_INTERFACE_MODE_MAX);
|
|
|
|
u32 firmware_ver;
|
|
bool has_downshift;
|
|
bool rate_match;
|
|
phy_interface_t const_interface;
|
|
|
|
struct device *hwmon_dev;
|
|
char *hwmon_name;
|
|
};
|
|
|
|
static const struct mv3310_chip *to_mv3310_chip(struct phy_device *phydev)
|
|
{
|
|
return phydev->drv->driver_data;
|
|
}
|
|
|
|
#ifdef CONFIG_HWMON
|
|
static umode_t mv3310_hwmon_is_visible(const void *data,
|
|
enum hwmon_sensor_types type,
|
|
u32 attr, int channel)
|
|
{
|
|
if (type == hwmon_chip && attr == hwmon_chip_update_interval)
|
|
return 0444;
|
|
if (type == hwmon_temp && attr == hwmon_temp_input)
|
|
return 0444;
|
|
return 0;
|
|
}
|
|
|
|
static int mv3310_hwmon_read_temp_reg(struct phy_device *phydev)
|
|
{
|
|
return phy_read_mmd(phydev, MDIO_MMD_VEND2, MV_V2_TEMP);
|
|
}
|
|
|
|
static int mv2110_hwmon_read_temp_reg(struct phy_device *phydev)
|
|
{
|
|
return phy_read_mmd(phydev, MDIO_MMD_PCS, MV_PCS_TEMP);
|
|
}
|
|
|
|
static int mv3310_hwmon_read(struct device *dev, enum hwmon_sensor_types type,
|
|
u32 attr, int channel, long *value)
|
|
{
|
|
struct phy_device *phydev = dev_get_drvdata(dev);
|
|
const struct mv3310_chip *chip = to_mv3310_chip(phydev);
|
|
int temp;
|
|
|
|
if (type == hwmon_chip && attr == hwmon_chip_update_interval) {
|
|
*value = MSEC_PER_SEC;
|
|
return 0;
|
|
}
|
|
|
|
if (type == hwmon_temp && attr == hwmon_temp_input) {
|
|
temp = chip->hwmon_read_temp_reg(phydev);
|
|
if (temp < 0)
|
|
return temp;
|
|
|
|
*value = ((temp & 0xff) - 75) * 1000;
|
|
|
|
return 0;
|
|
}
|
|
|
|
return -EOPNOTSUPP;
|
|
}
|
|
|
|
static const struct hwmon_ops mv3310_hwmon_ops = {
|
|
.is_visible = mv3310_hwmon_is_visible,
|
|
.read = mv3310_hwmon_read,
|
|
};
|
|
|
|
static u32 mv3310_hwmon_chip_config[] = {
|
|
HWMON_C_REGISTER_TZ | HWMON_C_UPDATE_INTERVAL,
|
|
0,
|
|
};
|
|
|
|
static const struct hwmon_channel_info mv3310_hwmon_chip = {
|
|
.type = hwmon_chip,
|
|
.config = mv3310_hwmon_chip_config,
|
|
};
|
|
|
|
static u32 mv3310_hwmon_temp_config[] = {
|
|
HWMON_T_INPUT,
|
|
0,
|
|
};
|
|
|
|
static const struct hwmon_channel_info mv3310_hwmon_temp = {
|
|
.type = hwmon_temp,
|
|
.config = mv3310_hwmon_temp_config,
|
|
};
|
|
|
|
static const struct hwmon_channel_info *mv3310_hwmon_info[] = {
|
|
&mv3310_hwmon_chip,
|
|
&mv3310_hwmon_temp,
|
|
NULL,
|
|
};
|
|
|
|
static const struct hwmon_chip_info mv3310_hwmon_chip_info = {
|
|
.ops = &mv3310_hwmon_ops,
|
|
.info = mv3310_hwmon_info,
|
|
};
|
|
|
|
static int mv3310_hwmon_config(struct phy_device *phydev, bool enable)
|
|
{
|
|
u16 val;
|
|
int ret;
|
|
|
|
if (phydev->drv->phy_id != MARVELL_PHY_ID_88X3310)
|
|
return 0;
|
|
|
|
ret = phy_write_mmd(phydev, MDIO_MMD_VEND2, MV_V2_TEMP,
|
|
MV_V2_TEMP_UNKNOWN);
|
|
if (ret < 0)
|
|
return ret;
|
|
|
|
val = enable ? MV_V2_TEMP_CTRL_SAMPLE : MV_V2_TEMP_CTRL_DISABLE;
|
|
|
|
return phy_modify_mmd(phydev, MDIO_MMD_VEND2, MV_V2_TEMP_CTRL,
|
|
MV_V2_TEMP_CTRL_MASK, val);
|
|
}
|
|
|
|
static int mv3310_hwmon_probe(struct phy_device *phydev)
|
|
{
|
|
struct device *dev = &phydev->mdio.dev;
|
|
struct mv3310_priv *priv = dev_get_drvdata(&phydev->mdio.dev);
|
|
int i, j, ret;
|
|
|
|
priv->hwmon_name = devm_kstrdup(dev, dev_name(dev), GFP_KERNEL);
|
|
if (!priv->hwmon_name)
|
|
return -ENODEV;
|
|
|
|
for (i = j = 0; priv->hwmon_name[i]; i++) {
|
|
if (isalnum(priv->hwmon_name[i])) {
|
|
if (i != j)
|
|
priv->hwmon_name[j] = priv->hwmon_name[i];
|
|
j++;
|
|
}
|
|
}
|
|
priv->hwmon_name[j] = '\0';
|
|
|
|
ret = mv3310_hwmon_config(phydev, true);
|
|
if (ret)
|
|
return ret;
|
|
|
|
priv->hwmon_dev = devm_hwmon_device_register_with_info(dev,
|
|
priv->hwmon_name, phydev,
|
|
&mv3310_hwmon_chip_info, NULL);
|
|
|
|
return PTR_ERR_OR_ZERO(priv->hwmon_dev);
|
|
}
|
|
#else
|
|
static inline int mv3310_hwmon_config(struct phy_device *phydev, bool enable)
|
|
{
|
|
return 0;
|
|
}
|
|
|
|
static int mv3310_hwmon_probe(struct phy_device *phydev)
|
|
{
|
|
return 0;
|
|
}
|
|
#endif
|
|
|
|
static int mv3310_power_down(struct phy_device *phydev)
|
|
{
|
|
return phy_set_bits_mmd(phydev, MDIO_MMD_VEND2, MV_V2_PORT_CTRL,
|
|
MV_V2_PORT_CTRL_PWRDOWN);
|
|
}
|
|
|
|
static int mv3310_power_up(struct phy_device *phydev)
|
|
{
|
|
struct mv3310_priv *priv = dev_get_drvdata(&phydev->mdio.dev);
|
|
int ret;
|
|
|
|
ret = phy_clear_bits_mmd(phydev, MDIO_MMD_VEND2, MV_V2_PORT_CTRL,
|
|
MV_V2_PORT_CTRL_PWRDOWN);
|
|
|
|
if (phydev->drv->phy_id != MARVELL_PHY_ID_88X3310 ||
|
|
priv->firmware_ver < 0x00030000)
|
|
return ret;
|
|
|
|
return phy_set_bits_mmd(phydev, MDIO_MMD_VEND2, MV_V2_PORT_CTRL,
|
|
MV_V2_33X0_PORT_CTRL_SWRST);
|
|
}
|
|
|
|
static int mv3310_reset(struct phy_device *phydev, u32 unit)
|
|
{
|
|
int val, err;
|
|
|
|
err = phy_modify_mmd(phydev, MDIO_MMD_PCS, unit + MDIO_CTRL1,
|
|
MDIO_CTRL1_RESET, MDIO_CTRL1_RESET);
|
|
if (err < 0)
|
|
return err;
|
|
|
|
return phy_read_mmd_poll_timeout(phydev, MDIO_MMD_PCS,
|
|
unit + MDIO_CTRL1, val,
|
|
!(val & MDIO_CTRL1_RESET),
|
|
5000, 100000, true);
|
|
}
|
|
|
|
static int mv3310_get_downshift(struct phy_device *phydev, u8 *ds)
|
|
{
|
|
struct mv3310_priv *priv = dev_get_drvdata(&phydev->mdio.dev);
|
|
int val;
|
|
|
|
if (!priv->has_downshift)
|
|
return -EOPNOTSUPP;
|
|
|
|
val = phy_read_mmd(phydev, MDIO_MMD_PCS, MV_PCS_DSC1);
|
|
if (val < 0)
|
|
return val;
|
|
|
|
if (val & MV_PCS_DSC1_ENABLE)
|
|
/* assume that all fields are the same */
|
|
*ds = 1 + FIELD_GET(MV_PCS_DSC1_10GBT, (u16)val);
|
|
else
|
|
*ds = DOWNSHIFT_DEV_DISABLE;
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int mv3310_set_downshift(struct phy_device *phydev, u8 ds)
|
|
{
|
|
struct mv3310_priv *priv = dev_get_drvdata(&phydev->mdio.dev);
|
|
u16 val;
|
|
int err;
|
|
|
|
if (!priv->has_downshift)
|
|
return -EOPNOTSUPP;
|
|
|
|
if (ds == DOWNSHIFT_DEV_DISABLE)
|
|
return phy_clear_bits_mmd(phydev, MDIO_MMD_PCS, MV_PCS_DSC1,
|
|
MV_PCS_DSC1_ENABLE);
|
|
|
|
/* DOWNSHIFT_DEV_DEFAULT_COUNT is confusing. It looks like it should
|
|
* set the default settings for the PHY. However, it is used for
|
|
* "ethtool --set-phy-tunable ethN downshift on". The intention is
|
|
* to enable downshift at a default number of retries. The default
|
|
* settings for 88x3310 are for two retries with downshift disabled.
|
|
* So let's use two retries with downshift enabled.
|
|
*/
|
|
if (ds == DOWNSHIFT_DEV_DEFAULT_COUNT)
|
|
ds = 2;
|
|
|
|
if (ds > 8)
|
|
return -E2BIG;
|
|
|
|
ds -= 1;
|
|
val = FIELD_PREP(MV_PCS_DSC2_2P5G, ds);
|
|
val |= FIELD_PREP(MV_PCS_DSC2_5G, ds);
|
|
err = phy_modify_mmd(phydev, MDIO_MMD_PCS, MV_PCS_DSC2,
|
|
MV_PCS_DSC2_2P5G | MV_PCS_DSC2_5G, val);
|
|
if (err < 0)
|
|
return err;
|
|
|
|
val = MV_PCS_DSC1_ENABLE;
|
|
val |= FIELD_PREP(MV_PCS_DSC1_10GBT, ds);
|
|
val |= FIELD_PREP(MV_PCS_DSC1_1GBR, ds);
|
|
val |= FIELD_PREP(MV_PCS_DSC1_100BTX, ds);
|
|
|
|
return phy_modify_mmd(phydev, MDIO_MMD_PCS, MV_PCS_DSC1,
|
|
MV_PCS_DSC1_ENABLE | MV_PCS_DSC1_10GBT |
|
|
MV_PCS_DSC1_1GBR | MV_PCS_DSC1_100BTX, val);
|
|
}
|
|
|
|
static int mv3310_get_edpd(struct phy_device *phydev, u16 *edpd)
|
|
{
|
|
int val;
|
|
|
|
val = phy_read_mmd(phydev, MDIO_MMD_PCS, MV_PCS_CSCR1);
|
|
if (val < 0)
|
|
return val;
|
|
|
|
switch (val & MV_PCS_CSCR1_ED_MASK) {
|
|
case MV_PCS_CSCR1_ED_NLP:
|
|
*edpd = 1000;
|
|
break;
|
|
case MV_PCS_CSCR1_ED_RX:
|
|
*edpd = ETHTOOL_PHY_EDPD_NO_TX;
|
|
break;
|
|
default:
|
|
*edpd = ETHTOOL_PHY_EDPD_DISABLE;
|
|
break;
|
|
}
|
|
return 0;
|
|
}
|
|
|
|
static int mv3310_set_edpd(struct phy_device *phydev, u16 edpd)
|
|
{
|
|
u16 val;
|
|
int err;
|
|
|
|
switch (edpd) {
|
|
case 1000:
|
|
case ETHTOOL_PHY_EDPD_DFLT_TX_MSECS:
|
|
val = MV_PCS_CSCR1_ED_NLP;
|
|
break;
|
|
|
|
case ETHTOOL_PHY_EDPD_NO_TX:
|
|
val = MV_PCS_CSCR1_ED_RX;
|
|
break;
|
|
|
|
case ETHTOOL_PHY_EDPD_DISABLE:
|
|
val = MV_PCS_CSCR1_ED_OFF;
|
|
break;
|
|
|
|
default:
|
|
return -EINVAL;
|
|
}
|
|
|
|
err = phy_modify_mmd_changed(phydev, MDIO_MMD_PCS, MV_PCS_CSCR1,
|
|
MV_PCS_CSCR1_ED_MASK, val);
|
|
if (err > 0)
|
|
err = mv3310_reset(phydev, MV_PCS_BASE_T);
|
|
|
|
return err;
|
|
}
|
|
|
|
static int mv3310_sfp_insert(void *upstream, const struct sfp_eeprom_id *id)
|
|
{
|
|
struct phy_device *phydev = upstream;
|
|
__ETHTOOL_DECLARE_LINK_MODE_MASK(support) = { 0, };
|
|
DECLARE_PHY_INTERFACE_MASK(interfaces);
|
|
phy_interface_t iface;
|
|
|
|
sfp_parse_support(phydev->sfp_bus, id, support, interfaces);
|
|
iface = sfp_select_interface(phydev->sfp_bus, support);
|
|
|
|
if (iface != PHY_INTERFACE_MODE_10GBASER) {
|
|
dev_err(&phydev->mdio.dev, "incompatible SFP module inserted\n");
|
|
return -EINVAL;
|
|
}
|
|
return 0;
|
|
}
|
|
|
|
static const struct sfp_upstream_ops mv3310_sfp_ops = {
|
|
.attach = phy_sfp_attach,
|
|
.detach = phy_sfp_detach,
|
|
.module_insert = mv3310_sfp_insert,
|
|
};
|
|
|
|
static int mv3310_probe(struct phy_device *phydev)
|
|
{
|
|
const struct mv3310_chip *chip = to_mv3310_chip(phydev);
|
|
struct mv3310_priv *priv;
|
|
u32 mmd_mask = MDIO_DEVS_PMAPMD | MDIO_DEVS_AN;
|
|
int ret;
|
|
|
|
if (!phydev->is_c45 ||
|
|
(phydev->c45_ids.devices_in_package & mmd_mask) != mmd_mask)
|
|
return -ENODEV;
|
|
|
|
ret = phy_read_mmd(phydev, MDIO_MMD_PMAPMD, MV_PMA_BOOT);
|
|
if (ret < 0)
|
|
return ret;
|
|
|
|
if (ret & MV_PMA_BOOT_FATAL) {
|
|
dev_warn(&phydev->mdio.dev,
|
|
"PHY failed to boot firmware, status=%04x\n", ret);
|
|
return -ENODEV;
|
|
}
|
|
|
|
priv = devm_kzalloc(&phydev->mdio.dev, sizeof(*priv), GFP_KERNEL);
|
|
if (!priv)
|
|
return -ENOMEM;
|
|
|
|
dev_set_drvdata(&phydev->mdio.dev, priv);
|
|
|
|
ret = phy_read_mmd(phydev, MDIO_MMD_PMAPMD, MV_PMA_FW_VER0);
|
|
if (ret < 0)
|
|
return ret;
|
|
|
|
priv->firmware_ver = ret << 16;
|
|
|
|
ret = phy_read_mmd(phydev, MDIO_MMD_PMAPMD, MV_PMA_FW_VER1);
|
|
if (ret < 0)
|
|
return ret;
|
|
|
|
priv->firmware_ver |= ret;
|
|
|
|
phydev_info(phydev, "Firmware version %u.%u.%u.%u\n",
|
|
priv->firmware_ver >> 24, (priv->firmware_ver >> 16) & 255,
|
|
(priv->firmware_ver >> 8) & 255, priv->firmware_ver & 255);
|
|
|
|
if (chip->has_downshift)
|
|
priv->has_downshift = chip->has_downshift(phydev);
|
|
|
|
/* Powering down the port when not in use saves about 600mW */
|
|
ret = mv3310_power_down(phydev);
|
|
if (ret)
|
|
return ret;
|
|
|
|
ret = mv3310_hwmon_probe(phydev);
|
|
if (ret)
|
|
return ret;
|
|
|
|
chip->init_supported_interfaces(priv->supported_interfaces);
|
|
|
|
return phy_sfp_probe(phydev, &mv3310_sfp_ops);
|
|
}
|
|
|
|
static void mv3310_remove(struct phy_device *phydev)
|
|
{
|
|
mv3310_hwmon_config(phydev, false);
|
|
}
|
|
|
|
static int mv3310_suspend(struct phy_device *phydev)
|
|
{
|
|
return mv3310_power_down(phydev);
|
|
}
|
|
|
|
static int mv3310_resume(struct phy_device *phydev)
|
|
{
|
|
int ret;
|
|
|
|
ret = mv3310_power_up(phydev);
|
|
if (ret)
|
|
return ret;
|
|
|
|
return mv3310_hwmon_config(phydev, true);
|
|
}
|
|
|
|
/* Some PHYs in the Alaska family such as the 88X3310 and the 88E2010
|
|
* don't set bit 14 in PMA Extended Abilities (1.11), although they do
|
|
* support 2.5GBASET and 5GBASET. For these models, we can still read their
|
|
* 2.5G/5G extended abilities register (1.21). We detect these models based on
|
|
* the PMA device identifier, with a mask matching models known to have this
|
|
* issue
|
|
*/
|
|
static bool mv3310_has_pma_ngbaset_quirk(struct phy_device *phydev)
|
|
{
|
|
if (!(phydev->c45_ids.devices_in_package & MDIO_DEVS_PMAPMD))
|
|
return false;
|
|
|
|
/* Only some revisions of the 88X3310 family PMA seem to be impacted */
|
|
return (phydev->c45_ids.device_ids[MDIO_MMD_PMAPMD] &
|
|
MV_PHY_ALASKA_NBT_QUIRK_MASK) == MV_PHY_ALASKA_NBT_QUIRK_REV;
|
|
}
|
|
|
|
static int mv2110_get_mactype(struct phy_device *phydev)
|
|
{
|
|
int mactype;
|
|
|
|
mactype = phy_read_mmd(phydev, MDIO_MMD_PMAPMD, MV_PMA_21X0_PORT_CTRL);
|
|
if (mactype < 0)
|
|
return mactype;
|
|
|
|
return mactype & MV_PMA_21X0_PORT_CTRL_MACTYPE_MASK;
|
|
}
|
|
|
|
static int mv2110_set_mactype(struct phy_device *phydev, int mactype)
|
|
{
|
|
int err, val;
|
|
|
|
mactype &= MV_PMA_21X0_PORT_CTRL_MACTYPE_MASK;
|
|
err = phy_modify_mmd(phydev, MDIO_MMD_PMAPMD, MV_PMA_21X0_PORT_CTRL,
|
|
MV_PMA_21X0_PORT_CTRL_SWRST |
|
|
MV_PMA_21X0_PORT_CTRL_MACTYPE_MASK,
|
|
MV_PMA_21X0_PORT_CTRL_SWRST | mactype);
|
|
if (err)
|
|
return err;
|
|
|
|
err = phy_set_bits_mmd(phydev, MDIO_MMD_AN, MV_AN_21X0_SERDES_CTRL2,
|
|
MV_AN_21X0_SERDES_CTRL2_AUTO_INIT_DIS |
|
|
MV_AN_21X0_SERDES_CTRL2_RUN_INIT);
|
|
if (err)
|
|
return err;
|
|
|
|
err = phy_read_mmd_poll_timeout(phydev, MDIO_MMD_AN,
|
|
MV_AN_21X0_SERDES_CTRL2, val,
|
|
!(val &
|
|
MV_AN_21X0_SERDES_CTRL2_RUN_INIT),
|
|
5000, 100000, true);
|
|
if (err)
|
|
return err;
|
|
|
|
return phy_clear_bits_mmd(phydev, MDIO_MMD_AN, MV_AN_21X0_SERDES_CTRL2,
|
|
MV_AN_21X0_SERDES_CTRL2_AUTO_INIT_DIS);
|
|
}
|
|
|
|
static int mv2110_select_mactype(unsigned long *interfaces)
|
|
{
|
|
if (test_bit(PHY_INTERFACE_MODE_USXGMII, interfaces))
|
|
return MV_PMA_21X0_PORT_CTRL_MACTYPE_USXGMII;
|
|
else if (test_bit(PHY_INTERFACE_MODE_SGMII, interfaces) &&
|
|
!test_bit(PHY_INTERFACE_MODE_10GBASER, interfaces))
|
|
return MV_PMA_21X0_PORT_CTRL_MACTYPE_5GBASER;
|
|
else if (test_bit(PHY_INTERFACE_MODE_10GBASER, interfaces))
|
|
return MV_PMA_21X0_PORT_CTRL_MACTYPE_10GBASER_RATE_MATCH;
|
|
else
|
|
return -1;
|
|
}
|
|
|
|
static int mv3310_get_mactype(struct phy_device *phydev)
|
|
{
|
|
int mactype;
|
|
|
|
mactype = phy_read_mmd(phydev, MDIO_MMD_VEND2, MV_V2_PORT_CTRL);
|
|
if (mactype < 0)
|
|
return mactype;
|
|
|
|
return mactype & MV_V2_33X0_PORT_CTRL_MACTYPE_MASK;
|
|
}
|
|
|
|
static int mv3310_set_mactype(struct phy_device *phydev, int mactype)
|
|
{
|
|
int ret;
|
|
|
|
mactype &= MV_V2_33X0_PORT_CTRL_MACTYPE_MASK;
|
|
ret = phy_modify_mmd_changed(phydev, MDIO_MMD_VEND2, MV_V2_PORT_CTRL,
|
|
MV_V2_33X0_PORT_CTRL_MACTYPE_MASK,
|
|
mactype);
|
|
if (ret <= 0)
|
|
return ret;
|
|
|
|
return phy_set_bits_mmd(phydev, MDIO_MMD_VEND2, MV_V2_PORT_CTRL,
|
|
MV_V2_33X0_PORT_CTRL_SWRST);
|
|
}
|
|
|
|
static int mv3310_select_mactype(unsigned long *interfaces)
|
|
{
|
|
if (test_bit(PHY_INTERFACE_MODE_USXGMII, interfaces))
|
|
return MV_V2_33X0_PORT_CTRL_MACTYPE_USXGMII;
|
|
else if (test_bit(PHY_INTERFACE_MODE_SGMII, interfaces) &&
|
|
test_bit(PHY_INTERFACE_MODE_10GBASER, interfaces))
|
|
return MV_V2_33X0_PORT_CTRL_MACTYPE_10GBASER;
|
|
else if (test_bit(PHY_INTERFACE_MODE_SGMII, interfaces) &&
|
|
test_bit(PHY_INTERFACE_MODE_RXAUI, interfaces))
|
|
return MV_V2_33X0_PORT_CTRL_MACTYPE_RXAUI;
|
|
else if (test_bit(PHY_INTERFACE_MODE_SGMII, interfaces) &&
|
|
test_bit(PHY_INTERFACE_MODE_XAUI, interfaces))
|
|
return MV_V2_3310_PORT_CTRL_MACTYPE_XAUI;
|
|
else if (test_bit(PHY_INTERFACE_MODE_10GBASER, interfaces))
|
|
return MV_V2_33X0_PORT_CTRL_MACTYPE_10GBASER_RATE_MATCH;
|
|
else if (test_bit(PHY_INTERFACE_MODE_RXAUI, interfaces))
|
|
return MV_V2_33X0_PORT_CTRL_MACTYPE_RXAUI_RATE_MATCH;
|
|
else if (test_bit(PHY_INTERFACE_MODE_XAUI, interfaces))
|
|
return MV_V2_3310_PORT_CTRL_MACTYPE_XAUI_RATE_MATCH;
|
|
else if (test_bit(PHY_INTERFACE_MODE_SGMII, interfaces))
|
|
return MV_V2_33X0_PORT_CTRL_MACTYPE_10GBASER;
|
|
else
|
|
return -1;
|
|
}
|
|
|
|
static int mv2110_init_interface(struct phy_device *phydev, int mactype)
|
|
{
|
|
struct mv3310_priv *priv = dev_get_drvdata(&phydev->mdio.dev);
|
|
|
|
priv->rate_match = false;
|
|
|
|
if (mactype == MV_PMA_21X0_PORT_CTRL_MACTYPE_10GBASER_RATE_MATCH)
|
|
priv->rate_match = true;
|
|
|
|
if (mactype == MV_PMA_21X0_PORT_CTRL_MACTYPE_USXGMII)
|
|
priv->const_interface = PHY_INTERFACE_MODE_USXGMII;
|
|
else if (mactype == MV_PMA_21X0_PORT_CTRL_MACTYPE_10GBASER_RATE_MATCH)
|
|
priv->const_interface = PHY_INTERFACE_MODE_10GBASER;
|
|
else if (mactype == MV_PMA_21X0_PORT_CTRL_MACTYPE_5GBASER ||
|
|
mactype == MV_PMA_21X0_PORT_CTRL_MACTYPE_5GBASER_NO_SGMII_AN)
|
|
priv->const_interface = PHY_INTERFACE_MODE_NA;
|
|
else
|
|
return -EINVAL;
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int mv3310_init_interface(struct phy_device *phydev, int mactype)
|
|
{
|
|
struct mv3310_priv *priv = dev_get_drvdata(&phydev->mdio.dev);
|
|
|
|
priv->rate_match = false;
|
|
|
|
if (mactype == MV_V2_33X0_PORT_CTRL_MACTYPE_10GBASER_RATE_MATCH ||
|
|
mactype == MV_V2_33X0_PORT_CTRL_MACTYPE_RXAUI_RATE_MATCH ||
|
|
mactype == MV_V2_3310_PORT_CTRL_MACTYPE_XAUI_RATE_MATCH)
|
|
priv->rate_match = true;
|
|
|
|
if (mactype == MV_V2_33X0_PORT_CTRL_MACTYPE_USXGMII)
|
|
priv->const_interface = PHY_INTERFACE_MODE_USXGMII;
|
|
else if (mactype == MV_V2_33X0_PORT_CTRL_MACTYPE_10GBASER_RATE_MATCH ||
|
|
mactype == MV_V2_33X0_PORT_CTRL_MACTYPE_10GBASER_NO_SGMII_AN ||
|
|
mactype == MV_V2_33X0_PORT_CTRL_MACTYPE_10GBASER)
|
|
priv->const_interface = PHY_INTERFACE_MODE_10GBASER;
|
|
else if (mactype == MV_V2_33X0_PORT_CTRL_MACTYPE_RXAUI_RATE_MATCH ||
|
|
mactype == MV_V2_33X0_PORT_CTRL_MACTYPE_RXAUI)
|
|
priv->const_interface = PHY_INTERFACE_MODE_RXAUI;
|
|
else if (mactype == MV_V2_3310_PORT_CTRL_MACTYPE_XAUI_RATE_MATCH ||
|
|
mactype == MV_V2_3310_PORT_CTRL_MACTYPE_XAUI)
|
|
priv->const_interface = PHY_INTERFACE_MODE_XAUI;
|
|
else
|
|
return -EINVAL;
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int mv3340_init_interface(struct phy_device *phydev, int mactype)
|
|
{
|
|
struct mv3310_priv *priv = dev_get_drvdata(&phydev->mdio.dev);
|
|
int err = 0;
|
|
|
|
priv->rate_match = false;
|
|
|
|
if (mactype == MV_V2_3340_PORT_CTRL_MACTYPE_RXAUI_NO_SGMII_AN)
|
|
priv->const_interface = PHY_INTERFACE_MODE_RXAUI;
|
|
else
|
|
err = mv3310_init_interface(phydev, mactype);
|
|
|
|
return err;
|
|
}
|
|
|
|
static int mv3310_config_init(struct phy_device *phydev)
|
|
{
|
|
struct mv3310_priv *priv = dev_get_drvdata(&phydev->mdio.dev);
|
|
const struct mv3310_chip *chip = to_mv3310_chip(phydev);
|
|
int err, mactype;
|
|
|
|
/* Check that the PHY interface type is compatible */
|
|
if (!test_bit(phydev->interface, priv->supported_interfaces))
|
|
return -ENODEV;
|
|
|
|
phydev->mdix_ctrl = ETH_TP_MDI_AUTO;
|
|
|
|
/* Power up so reset works */
|
|
err = mv3310_power_up(phydev);
|
|
if (err)
|
|
return err;
|
|
|
|
/* If host provided host supported interface modes, try to select the
|
|
* best one
|
|
*/
|
|
if (!phy_interface_empty(phydev->host_interfaces)) {
|
|
mactype = chip->select_mactype(phydev->host_interfaces);
|
|
if (mactype >= 0) {
|
|
phydev_info(phydev, "Changing MACTYPE to %i\n",
|
|
mactype);
|
|
err = chip->set_mactype(phydev, mactype);
|
|
if (err)
|
|
return err;
|
|
}
|
|
}
|
|
|
|
mactype = chip->get_mactype(phydev);
|
|
if (mactype < 0)
|
|
return mactype;
|
|
|
|
err = chip->init_interface(phydev, mactype);
|
|
if (err) {
|
|
phydev_err(phydev, "MACTYPE configuration invalid\n");
|
|
return err;
|
|
}
|
|
|
|
/* Enable EDPD mode - saving 600mW */
|
|
err = mv3310_set_edpd(phydev, ETHTOOL_PHY_EDPD_DFLT_TX_MSECS);
|
|
if (err)
|
|
return err;
|
|
|
|
/* Allow downshift */
|
|
err = mv3310_set_downshift(phydev, DOWNSHIFT_DEV_DEFAULT_COUNT);
|
|
if (err && err != -EOPNOTSUPP)
|
|
return err;
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int mv3310_get_features(struct phy_device *phydev)
|
|
{
|
|
int ret, val;
|
|
|
|
ret = genphy_c45_pma_read_abilities(phydev);
|
|
if (ret)
|
|
return ret;
|
|
|
|
if (mv3310_has_pma_ngbaset_quirk(phydev)) {
|
|
val = phy_read_mmd(phydev, MDIO_MMD_PMAPMD,
|
|
MDIO_PMA_NG_EXTABLE);
|
|
if (val < 0)
|
|
return val;
|
|
|
|
linkmode_mod_bit(ETHTOOL_LINK_MODE_2500baseT_Full_BIT,
|
|
phydev->supported,
|
|
val & MDIO_PMA_NG_EXTABLE_2_5GBT);
|
|
|
|
linkmode_mod_bit(ETHTOOL_LINK_MODE_5000baseT_Full_BIT,
|
|
phydev->supported,
|
|
val & MDIO_PMA_NG_EXTABLE_5GBT);
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int mv3310_config_mdix(struct phy_device *phydev)
|
|
{
|
|
u16 val;
|
|
int err;
|
|
|
|
switch (phydev->mdix_ctrl) {
|
|
case ETH_TP_MDI_AUTO:
|
|
val = MV_PCS_CSCR1_MDIX_AUTO;
|
|
break;
|
|
case ETH_TP_MDI_X:
|
|
val = MV_PCS_CSCR1_MDIX_MDIX;
|
|
break;
|
|
case ETH_TP_MDI:
|
|
val = MV_PCS_CSCR1_MDIX_MDI;
|
|
break;
|
|
default:
|
|
return -EINVAL;
|
|
}
|
|
|
|
err = phy_modify_mmd_changed(phydev, MDIO_MMD_PCS, MV_PCS_CSCR1,
|
|
MV_PCS_CSCR1_MDIX_MASK, val);
|
|
if (err > 0)
|
|
err = mv3310_reset(phydev, MV_PCS_BASE_T);
|
|
|
|
return err;
|
|
}
|
|
|
|
static int mv3310_config_aneg(struct phy_device *phydev)
|
|
{
|
|
bool changed = false;
|
|
u16 reg;
|
|
int ret;
|
|
|
|
ret = mv3310_config_mdix(phydev);
|
|
if (ret < 0)
|
|
return ret;
|
|
|
|
if (phydev->autoneg == AUTONEG_DISABLE)
|
|
return genphy_c45_pma_setup_forced(phydev);
|
|
|
|
ret = genphy_c45_an_config_aneg(phydev);
|
|
if (ret < 0)
|
|
return ret;
|
|
if (ret > 0)
|
|
changed = true;
|
|
|
|
/* Clause 45 has no standardized support for 1000BaseT, therefore
|
|
* use vendor registers for this mode.
|
|
*/
|
|
reg = linkmode_adv_to_mii_ctrl1000_t(phydev->advertising);
|
|
ret = phy_modify_mmd_changed(phydev, MDIO_MMD_AN, MV_AN_CTRL1000,
|
|
ADVERTISE_1000FULL | ADVERTISE_1000HALF, reg);
|
|
if (ret < 0)
|
|
return ret;
|
|
if (ret > 0)
|
|
changed = true;
|
|
|
|
return genphy_c45_check_and_restart_aneg(phydev, changed);
|
|
}
|
|
|
|
static int mv3310_aneg_done(struct phy_device *phydev)
|
|
{
|
|
int val;
|
|
|
|
val = phy_read_mmd(phydev, MDIO_MMD_PCS, MV_PCS_BASE_R + MDIO_STAT1);
|
|
if (val < 0)
|
|
return val;
|
|
|
|
if (val & MDIO_STAT1_LSTATUS)
|
|
return 1;
|
|
|
|
return genphy_c45_aneg_done(phydev);
|
|
}
|
|
|
|
static void mv3310_update_interface(struct phy_device *phydev)
|
|
{
|
|
struct mv3310_priv *priv = dev_get_drvdata(&phydev->mdio.dev);
|
|
|
|
if (!phydev->link)
|
|
return;
|
|
|
|
/* In all of the "* with Rate Matching" modes the PHY interface is fixed
|
|
* at 10Gb. The PHY adapts the rate to actual wire speed with help of
|
|
* internal 16KB buffer.
|
|
*
|
|
* In USXGMII mode the PHY interface mode is also fixed.
|
|
*/
|
|
if (priv->rate_match ||
|
|
priv->const_interface == PHY_INTERFACE_MODE_USXGMII) {
|
|
phydev->interface = priv->const_interface;
|
|
return;
|
|
}
|
|
|
|
/* The PHY automatically switches its serdes interface (and active PHYXS
|
|
* instance) between Cisco SGMII, 2500BaseX, 5GBase-R and 10GBase-R /
|
|
* xaui / rxaui modes according to the speed.
|
|
* Florian suggests setting phydev->interface to communicate this to the
|
|
* MAC. Only do this if we are already in one of the above modes.
|
|
*/
|
|
switch (phydev->speed) {
|
|
case SPEED_10000:
|
|
phydev->interface = priv->const_interface;
|
|
break;
|
|
case SPEED_5000:
|
|
phydev->interface = PHY_INTERFACE_MODE_5GBASER;
|
|
break;
|
|
case SPEED_2500:
|
|
phydev->interface = PHY_INTERFACE_MODE_2500BASEX;
|
|
break;
|
|
case SPEED_1000:
|
|
case SPEED_100:
|
|
case SPEED_10:
|
|
phydev->interface = PHY_INTERFACE_MODE_SGMII;
|
|
break;
|
|
default:
|
|
break;
|
|
}
|
|
}
|
|
|
|
/* 10GBASE-ER,LR,LRM,SR do not support autonegotiation. */
|
|
static int mv3310_read_status_10gbaser(struct phy_device *phydev)
|
|
{
|
|
phydev->link = 1;
|
|
phydev->speed = SPEED_10000;
|
|
phydev->duplex = DUPLEX_FULL;
|
|
phydev->port = PORT_FIBRE;
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int mv3310_read_status_copper(struct phy_device *phydev)
|
|
{
|
|
int cssr1, speed, val;
|
|
|
|
val = genphy_c45_read_link(phydev);
|
|
if (val < 0)
|
|
return val;
|
|
|
|
val = phy_read_mmd(phydev, MDIO_MMD_AN, MDIO_STAT1);
|
|
if (val < 0)
|
|
return val;
|
|
|
|
cssr1 = phy_read_mmd(phydev, MDIO_MMD_PCS, MV_PCS_CSSR1);
|
|
if (cssr1 < 0)
|
|
return cssr1;
|
|
|
|
/* If the link settings are not resolved, mark the link down */
|
|
if (!(cssr1 & MV_PCS_CSSR1_RESOLVED)) {
|
|
phydev->link = 0;
|
|
return 0;
|
|
}
|
|
|
|
/* Read the copper link settings */
|
|
speed = cssr1 & MV_PCS_CSSR1_SPD1_MASK;
|
|
if (speed == MV_PCS_CSSR1_SPD1_SPD2)
|
|
speed |= cssr1 & MV_PCS_CSSR1_SPD2_MASK;
|
|
|
|
switch (speed) {
|
|
case MV_PCS_CSSR1_SPD1_SPD2 | MV_PCS_CSSR1_SPD2_10000:
|
|
phydev->speed = SPEED_10000;
|
|
break;
|
|
|
|
case MV_PCS_CSSR1_SPD1_SPD2 | MV_PCS_CSSR1_SPD2_5000:
|
|
phydev->speed = SPEED_5000;
|
|
break;
|
|
|
|
case MV_PCS_CSSR1_SPD1_SPD2 | MV_PCS_CSSR1_SPD2_2500:
|
|
phydev->speed = SPEED_2500;
|
|
break;
|
|
|
|
case MV_PCS_CSSR1_SPD1_1000:
|
|
phydev->speed = SPEED_1000;
|
|
break;
|
|
|
|
case MV_PCS_CSSR1_SPD1_100:
|
|
phydev->speed = SPEED_100;
|
|
break;
|
|
|
|
case MV_PCS_CSSR1_SPD1_10:
|
|
phydev->speed = SPEED_10;
|
|
break;
|
|
}
|
|
|
|
phydev->duplex = cssr1 & MV_PCS_CSSR1_DUPLEX_FULL ?
|
|
DUPLEX_FULL : DUPLEX_HALF;
|
|
phydev->port = PORT_TP;
|
|
phydev->mdix = cssr1 & MV_PCS_CSSR1_MDIX ?
|
|
ETH_TP_MDI_X : ETH_TP_MDI;
|
|
|
|
if (val & MDIO_AN_STAT1_COMPLETE) {
|
|
val = genphy_c45_read_lpa(phydev);
|
|
if (val < 0)
|
|
return val;
|
|
|
|
/* Read the link partner's 1G advertisement */
|
|
val = phy_read_mmd(phydev, MDIO_MMD_AN, MV_AN_STAT1000);
|
|
if (val < 0)
|
|
return val;
|
|
|
|
mii_stat1000_mod_linkmode_lpa_t(phydev->lp_advertising, val);
|
|
|
|
/* Update the pause status */
|
|
phy_resolve_aneg_pause(phydev);
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int mv3310_read_status(struct phy_device *phydev)
|
|
{
|
|
int err, val;
|
|
|
|
phydev->speed = SPEED_UNKNOWN;
|
|
phydev->duplex = DUPLEX_UNKNOWN;
|
|
linkmode_zero(phydev->lp_advertising);
|
|
phydev->link = 0;
|
|
phydev->pause = 0;
|
|
phydev->asym_pause = 0;
|
|
phydev->mdix = ETH_TP_MDI_INVALID;
|
|
|
|
val = phy_read_mmd(phydev, MDIO_MMD_PCS, MV_PCS_BASE_R + MDIO_STAT1);
|
|
if (val < 0)
|
|
return val;
|
|
|
|
if (val & MDIO_STAT1_LSTATUS)
|
|
err = mv3310_read_status_10gbaser(phydev);
|
|
else
|
|
err = mv3310_read_status_copper(phydev);
|
|
if (err < 0)
|
|
return err;
|
|
|
|
if (phydev->link)
|
|
mv3310_update_interface(phydev);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int mv3310_get_tunable(struct phy_device *phydev,
|
|
struct ethtool_tunable *tuna, void *data)
|
|
{
|
|
switch (tuna->id) {
|
|
case ETHTOOL_PHY_DOWNSHIFT:
|
|
return mv3310_get_downshift(phydev, data);
|
|
case ETHTOOL_PHY_EDPD:
|
|
return mv3310_get_edpd(phydev, data);
|
|
default:
|
|
return -EOPNOTSUPP;
|
|
}
|
|
}
|
|
|
|
static int mv3310_set_tunable(struct phy_device *phydev,
|
|
struct ethtool_tunable *tuna, const void *data)
|
|
{
|
|
switch (tuna->id) {
|
|
case ETHTOOL_PHY_DOWNSHIFT:
|
|
return mv3310_set_downshift(phydev, *(u8 *)data);
|
|
case ETHTOOL_PHY_EDPD:
|
|
return mv3310_set_edpd(phydev, *(u16 *)data);
|
|
default:
|
|
return -EOPNOTSUPP;
|
|
}
|
|
}
|
|
|
|
static bool mv3310_has_downshift(struct phy_device *phydev)
|
|
{
|
|
struct mv3310_priv *priv = dev_get_drvdata(&phydev->mdio.dev);
|
|
|
|
/* Fails to downshift with firmware older than v0.3.5.0 */
|
|
return priv->firmware_ver >= MV_VERSION(0,3,5,0);
|
|
}
|
|
|
|
static void mv3310_init_supported_interfaces(unsigned long *mask)
|
|
{
|
|
__set_bit(PHY_INTERFACE_MODE_SGMII, mask);
|
|
__set_bit(PHY_INTERFACE_MODE_2500BASEX, mask);
|
|
__set_bit(PHY_INTERFACE_MODE_5GBASER, mask);
|
|
__set_bit(PHY_INTERFACE_MODE_XAUI, mask);
|
|
__set_bit(PHY_INTERFACE_MODE_RXAUI, mask);
|
|
__set_bit(PHY_INTERFACE_MODE_10GBASER, mask);
|
|
__set_bit(PHY_INTERFACE_MODE_USXGMII, mask);
|
|
}
|
|
|
|
static void mv3340_init_supported_interfaces(unsigned long *mask)
|
|
{
|
|
__set_bit(PHY_INTERFACE_MODE_SGMII, mask);
|
|
__set_bit(PHY_INTERFACE_MODE_2500BASEX, mask);
|
|
__set_bit(PHY_INTERFACE_MODE_5GBASER, mask);
|
|
__set_bit(PHY_INTERFACE_MODE_RXAUI, mask);
|
|
__set_bit(PHY_INTERFACE_MODE_10GBASER, mask);
|
|
__set_bit(PHY_INTERFACE_MODE_USXGMII, mask);
|
|
}
|
|
|
|
static void mv2110_init_supported_interfaces(unsigned long *mask)
|
|
{
|
|
__set_bit(PHY_INTERFACE_MODE_SGMII, mask);
|
|
__set_bit(PHY_INTERFACE_MODE_2500BASEX, mask);
|
|
__set_bit(PHY_INTERFACE_MODE_5GBASER, mask);
|
|
__set_bit(PHY_INTERFACE_MODE_10GBASER, mask);
|
|
__set_bit(PHY_INTERFACE_MODE_USXGMII, mask);
|
|
}
|
|
|
|
static void mv2111_init_supported_interfaces(unsigned long *mask)
|
|
{
|
|
__set_bit(PHY_INTERFACE_MODE_SGMII, mask);
|
|
__set_bit(PHY_INTERFACE_MODE_2500BASEX, mask);
|
|
__set_bit(PHY_INTERFACE_MODE_10GBASER, mask);
|
|
__set_bit(PHY_INTERFACE_MODE_USXGMII, mask);
|
|
}
|
|
|
|
static const struct mv3310_chip mv3310_type = {
|
|
.has_downshift = mv3310_has_downshift,
|
|
.init_supported_interfaces = mv3310_init_supported_interfaces,
|
|
.get_mactype = mv3310_get_mactype,
|
|
.set_mactype = mv3310_set_mactype,
|
|
.select_mactype = mv3310_select_mactype,
|
|
.init_interface = mv3310_init_interface,
|
|
|
|
#ifdef CONFIG_HWMON
|
|
.hwmon_read_temp_reg = mv3310_hwmon_read_temp_reg,
|
|
#endif
|
|
};
|
|
|
|
static const struct mv3310_chip mv3340_type = {
|
|
.has_downshift = mv3310_has_downshift,
|
|
.init_supported_interfaces = mv3340_init_supported_interfaces,
|
|
.get_mactype = mv3310_get_mactype,
|
|
.set_mactype = mv3310_set_mactype,
|
|
.select_mactype = mv3310_select_mactype,
|
|
.init_interface = mv3340_init_interface,
|
|
|
|
#ifdef CONFIG_HWMON
|
|
.hwmon_read_temp_reg = mv3310_hwmon_read_temp_reg,
|
|
#endif
|
|
};
|
|
|
|
static const struct mv3310_chip mv2110_type = {
|
|
.init_supported_interfaces = mv2110_init_supported_interfaces,
|
|
.get_mactype = mv2110_get_mactype,
|
|
.set_mactype = mv2110_set_mactype,
|
|
.select_mactype = mv2110_select_mactype,
|
|
.init_interface = mv2110_init_interface,
|
|
|
|
#ifdef CONFIG_HWMON
|
|
.hwmon_read_temp_reg = mv2110_hwmon_read_temp_reg,
|
|
#endif
|
|
};
|
|
|
|
static const struct mv3310_chip mv2111_type = {
|
|
.init_supported_interfaces = mv2111_init_supported_interfaces,
|
|
.get_mactype = mv2110_get_mactype,
|
|
.set_mactype = mv2110_set_mactype,
|
|
.select_mactype = mv2110_select_mactype,
|
|
.init_interface = mv2110_init_interface,
|
|
|
|
#ifdef CONFIG_HWMON
|
|
.hwmon_read_temp_reg = mv2110_hwmon_read_temp_reg,
|
|
#endif
|
|
};
|
|
|
|
static int mv3310_get_number_of_ports(struct phy_device *phydev)
|
|
{
|
|
int ret;
|
|
|
|
ret = phy_read_mmd(phydev, MDIO_MMD_PCS, MV_PCS_PORT_INFO);
|
|
if (ret < 0)
|
|
return ret;
|
|
|
|
ret &= MV_PCS_PORT_INFO_NPORTS_MASK;
|
|
ret >>= MV_PCS_PORT_INFO_NPORTS_SHIFT;
|
|
|
|
return ret + 1;
|
|
}
|
|
|
|
static int mv3310_match_phy_device(struct phy_device *phydev)
|
|
{
|
|
if ((phydev->c45_ids.device_ids[MDIO_MMD_PMAPMD] &
|
|
MARVELL_PHY_ID_MASK) != MARVELL_PHY_ID_88X3310)
|
|
return 0;
|
|
|
|
return mv3310_get_number_of_ports(phydev) == 1;
|
|
}
|
|
|
|
static int mv3340_match_phy_device(struct phy_device *phydev)
|
|
{
|
|
if ((phydev->c45_ids.device_ids[MDIO_MMD_PMAPMD] &
|
|
MARVELL_PHY_ID_MASK) != MARVELL_PHY_ID_88X3310)
|
|
return 0;
|
|
|
|
return mv3310_get_number_of_ports(phydev) == 4;
|
|
}
|
|
|
|
static int mv211x_match_phy_device(struct phy_device *phydev, bool has_5g)
|
|
{
|
|
int val;
|
|
|
|
if ((phydev->c45_ids.device_ids[MDIO_MMD_PMAPMD] &
|
|
MARVELL_PHY_ID_MASK) != MARVELL_PHY_ID_88E2110)
|
|
return 0;
|
|
|
|
val = phy_read_mmd(phydev, MDIO_MMD_PCS, MDIO_SPEED);
|
|
if (val < 0)
|
|
return val;
|
|
|
|
return !!(val & MDIO_PCS_SPEED_5G) == has_5g;
|
|
}
|
|
|
|
static int mv2110_match_phy_device(struct phy_device *phydev)
|
|
{
|
|
return mv211x_match_phy_device(phydev, true);
|
|
}
|
|
|
|
static int mv2111_match_phy_device(struct phy_device *phydev)
|
|
{
|
|
return mv211x_match_phy_device(phydev, false);
|
|
}
|
|
|
|
static void mv3110_get_wol(struct phy_device *phydev,
|
|
struct ethtool_wolinfo *wol)
|
|
{
|
|
int ret;
|
|
|
|
wol->supported = WAKE_MAGIC;
|
|
wol->wolopts = 0;
|
|
|
|
ret = phy_read_mmd(phydev, MDIO_MMD_VEND2, MV_V2_WOL_CTRL);
|
|
if (ret < 0)
|
|
return;
|
|
|
|
if (ret & MV_V2_WOL_CTRL_MAGIC_PKT_EN)
|
|
wol->wolopts |= WAKE_MAGIC;
|
|
}
|
|
|
|
static int mv3110_set_wol(struct phy_device *phydev,
|
|
struct ethtool_wolinfo *wol)
|
|
{
|
|
int ret;
|
|
|
|
if (wol->wolopts & WAKE_MAGIC) {
|
|
/* Enable the WOL interrupt */
|
|
ret = phy_set_bits_mmd(phydev, MDIO_MMD_VEND2,
|
|
MV_V2_PORT_INTR_MASK,
|
|
MV_V2_PORT_INTR_STS_WOL_EN);
|
|
if (ret < 0)
|
|
return ret;
|
|
|
|
/* Store the device address for the magic packet */
|
|
ret = phy_write_mmd(phydev, MDIO_MMD_VEND2,
|
|
MV_V2_MAGIC_PKT_WORD2,
|
|
((phydev->attached_dev->dev_addr[5] << 8) |
|
|
phydev->attached_dev->dev_addr[4]));
|
|
if (ret < 0)
|
|
return ret;
|
|
|
|
ret = phy_write_mmd(phydev, MDIO_MMD_VEND2,
|
|
MV_V2_MAGIC_PKT_WORD1,
|
|
((phydev->attached_dev->dev_addr[3] << 8) |
|
|
phydev->attached_dev->dev_addr[2]));
|
|
if (ret < 0)
|
|
return ret;
|
|
|
|
ret = phy_write_mmd(phydev, MDIO_MMD_VEND2,
|
|
MV_V2_MAGIC_PKT_WORD0,
|
|
((phydev->attached_dev->dev_addr[1] << 8) |
|
|
phydev->attached_dev->dev_addr[0]));
|
|
if (ret < 0)
|
|
return ret;
|
|
|
|
/* Clear WOL status and enable magic packet matching */
|
|
ret = phy_set_bits_mmd(phydev, MDIO_MMD_VEND2,
|
|
MV_V2_WOL_CTRL,
|
|
MV_V2_WOL_CTRL_MAGIC_PKT_EN |
|
|
MV_V2_WOL_CTRL_CLEAR_STS);
|
|
if (ret < 0)
|
|
return ret;
|
|
} else {
|
|
/* Disable magic packet matching & reset WOL status bit */
|
|
ret = phy_modify_mmd(phydev, MDIO_MMD_VEND2,
|
|
MV_V2_WOL_CTRL,
|
|
MV_V2_WOL_CTRL_MAGIC_PKT_EN,
|
|
MV_V2_WOL_CTRL_CLEAR_STS);
|
|
if (ret < 0)
|
|
return ret;
|
|
}
|
|
|
|
/* Reset the clear WOL status bit as it does not self-clear */
|
|
return phy_clear_bits_mmd(phydev, MDIO_MMD_VEND2,
|
|
MV_V2_WOL_CTRL,
|
|
MV_V2_WOL_CTRL_CLEAR_STS);
|
|
}
|
|
|
|
static struct phy_driver mv3310_drivers[] = {
|
|
{
|
|
.phy_id = MARVELL_PHY_ID_88X3310,
|
|
.phy_id_mask = MARVELL_PHY_ID_MASK,
|
|
.match_phy_device = mv3310_match_phy_device,
|
|
.name = "mv88x3310",
|
|
.driver_data = &mv3310_type,
|
|
.get_features = mv3310_get_features,
|
|
.config_init = mv3310_config_init,
|
|
.probe = mv3310_probe,
|
|
.suspend = mv3310_suspend,
|
|
.resume = mv3310_resume,
|
|
.config_aneg = mv3310_config_aneg,
|
|
.aneg_done = mv3310_aneg_done,
|
|
.read_status = mv3310_read_status,
|
|
.get_tunable = mv3310_get_tunable,
|
|
.set_tunable = mv3310_set_tunable,
|
|
.remove = mv3310_remove,
|
|
.set_loopback = genphy_c45_loopback,
|
|
.get_wol = mv3110_get_wol,
|
|
.set_wol = mv3110_set_wol,
|
|
},
|
|
{
|
|
.phy_id = MARVELL_PHY_ID_88X3310,
|
|
.phy_id_mask = MARVELL_PHY_ID_MASK,
|
|
.match_phy_device = mv3340_match_phy_device,
|
|
.name = "mv88x3340",
|
|
.driver_data = &mv3340_type,
|
|
.get_features = mv3310_get_features,
|
|
.config_init = mv3310_config_init,
|
|
.probe = mv3310_probe,
|
|
.suspend = mv3310_suspend,
|
|
.resume = mv3310_resume,
|
|
.config_aneg = mv3310_config_aneg,
|
|
.aneg_done = mv3310_aneg_done,
|
|
.read_status = mv3310_read_status,
|
|
.get_tunable = mv3310_get_tunable,
|
|
.set_tunable = mv3310_set_tunable,
|
|
.remove = mv3310_remove,
|
|
.set_loopback = genphy_c45_loopback,
|
|
},
|
|
{
|
|
.phy_id = MARVELL_PHY_ID_88E2110,
|
|
.phy_id_mask = MARVELL_PHY_ID_MASK,
|
|
.match_phy_device = mv2110_match_phy_device,
|
|
.name = "mv88e2110",
|
|
.driver_data = &mv2110_type,
|
|
.probe = mv3310_probe,
|
|
.suspend = mv3310_suspend,
|
|
.resume = mv3310_resume,
|
|
.config_init = mv3310_config_init,
|
|
.config_aneg = mv3310_config_aneg,
|
|
.aneg_done = mv3310_aneg_done,
|
|
.read_status = mv3310_read_status,
|
|
.get_tunable = mv3310_get_tunable,
|
|
.set_tunable = mv3310_set_tunable,
|
|
.remove = mv3310_remove,
|
|
.set_loopback = genphy_c45_loopback,
|
|
.get_wol = mv3110_get_wol,
|
|
.set_wol = mv3110_set_wol,
|
|
},
|
|
{
|
|
.phy_id = MARVELL_PHY_ID_88E2110,
|
|
.phy_id_mask = MARVELL_PHY_ID_MASK,
|
|
.match_phy_device = mv2111_match_phy_device,
|
|
.name = "mv88e2111",
|
|
.driver_data = &mv2111_type,
|
|
.probe = mv3310_probe,
|
|
.suspend = mv3310_suspend,
|
|
.resume = mv3310_resume,
|
|
.config_init = mv3310_config_init,
|
|
.config_aneg = mv3310_config_aneg,
|
|
.aneg_done = mv3310_aneg_done,
|
|
.read_status = mv3310_read_status,
|
|
.get_tunable = mv3310_get_tunable,
|
|
.set_tunable = mv3310_set_tunable,
|
|
.remove = mv3310_remove,
|
|
.set_loopback = genphy_c45_loopback,
|
|
},
|
|
};
|
|
|
|
module_phy_driver(mv3310_drivers);
|
|
|
|
static struct mdio_device_id __maybe_unused mv3310_tbl[] = {
|
|
{ MARVELL_PHY_ID_88X3310, MARVELL_PHY_ID_MASK },
|
|
{ MARVELL_PHY_ID_88E2110, MARVELL_PHY_ID_MASK },
|
|
{ },
|
|
};
|
|
MODULE_DEVICE_TABLE(mdio, mv3310_tbl);
|
|
MODULE_DESCRIPTION("Marvell Alaska X/M multi-gigabit Ethernet PHY driver");
|
|
MODULE_LICENSE("GPL");
|