389 lines
9.0 KiB
C
389 lines
9.0 KiB
C
// SPDX-License-Identifier: (GPL-2.0 OR MIT)
|
|
/*
|
|
* Driver for the MDIO interface of Microsemi network switches.
|
|
*
|
|
* Author: Alexandre Belloni <alexandre.belloni@bootlin.com>
|
|
* Copyright (c) 2017 Microsemi Corporation
|
|
*/
|
|
|
|
#include <linux/bitops.h>
|
|
#include <linux/clk.h>
|
|
#include <linux/io.h>
|
|
#include <linux/iopoll.h>
|
|
#include <linux/kernel.h>
|
|
#include <linux/mdio/mdio-mscc-miim.h>
|
|
#include <linux/mfd/ocelot.h>
|
|
#include <linux/module.h>
|
|
#include <linux/of_mdio.h>
|
|
#include <linux/phy.h>
|
|
#include <linux/platform_device.h>
|
|
#include <linux/property.h>
|
|
#include <linux/regmap.h>
|
|
|
|
#define MSCC_MIIM_REG_STATUS 0x0
|
|
#define MSCC_MIIM_STATUS_STAT_PENDING BIT(2)
|
|
#define MSCC_MIIM_STATUS_STAT_BUSY BIT(3)
|
|
#define MSCC_MIIM_REG_CMD 0x8
|
|
#define MSCC_MIIM_CMD_OPR_WRITE BIT(1)
|
|
#define MSCC_MIIM_CMD_OPR_READ BIT(2)
|
|
#define MSCC_MIIM_CMD_WRDATA_SHIFT 4
|
|
#define MSCC_MIIM_CMD_REGAD_SHIFT 20
|
|
#define MSCC_MIIM_CMD_PHYAD_SHIFT 25
|
|
#define MSCC_MIIM_CMD_VLD BIT(31)
|
|
#define MSCC_MIIM_REG_DATA 0xC
|
|
#define MSCC_MIIM_DATA_ERROR (BIT(16) | BIT(17))
|
|
#define MSCC_MIIM_REG_CFG 0x10
|
|
#define MSCC_MIIM_CFG_PRESCALE_MASK GENMASK(7, 0)
|
|
|
|
#define MSCC_PHY_REG_PHY_CFG 0x0
|
|
#define PHY_CFG_PHY_ENA (BIT(0) | BIT(1) | BIT(2) | BIT(3))
|
|
#define PHY_CFG_PHY_COMMON_RESET BIT(4)
|
|
#define PHY_CFG_PHY_RESET (BIT(5) | BIT(6) | BIT(7) | BIT(8))
|
|
#define MSCC_PHY_REG_PHY_STATUS 0x4
|
|
|
|
#define LAN966X_CUPHY_COMMON_CFG 0x0
|
|
#define CUPHY_COMMON_CFG_RESET_N BIT(0)
|
|
|
|
struct mscc_miim_info {
|
|
unsigned int phy_reset_offset;
|
|
unsigned int phy_reset_bits;
|
|
};
|
|
|
|
struct mscc_miim_dev {
|
|
struct regmap *regs;
|
|
int mii_status_offset;
|
|
struct regmap *phy_regs;
|
|
const struct mscc_miim_info *info;
|
|
struct clk *clk;
|
|
u32 bus_freq;
|
|
};
|
|
|
|
/* When high resolution timers aren't built-in: we can't use usleep_range() as
|
|
* we would sleep way too long. Use udelay() instead.
|
|
*/
|
|
#define mscc_readx_poll_timeout(op, addr, val, cond, delay_us, timeout_us)\
|
|
({ \
|
|
if (!IS_ENABLED(CONFIG_HIGH_RES_TIMERS)) \
|
|
readx_poll_timeout_atomic(op, addr, val, cond, delay_us, \
|
|
timeout_us); \
|
|
readx_poll_timeout(op, addr, val, cond, delay_us, timeout_us); \
|
|
})
|
|
|
|
static int mscc_miim_status(struct mii_bus *bus)
|
|
{
|
|
struct mscc_miim_dev *miim = bus->priv;
|
|
int val, ret;
|
|
|
|
ret = regmap_read(miim->regs,
|
|
MSCC_MIIM_REG_STATUS + miim->mii_status_offset, &val);
|
|
if (ret < 0) {
|
|
WARN_ONCE(1, "mscc miim status read error %d\n", ret);
|
|
return ret;
|
|
}
|
|
|
|
return val;
|
|
}
|
|
|
|
static int mscc_miim_wait_ready(struct mii_bus *bus)
|
|
{
|
|
u32 val;
|
|
|
|
return mscc_readx_poll_timeout(mscc_miim_status, bus, val,
|
|
!(val & MSCC_MIIM_STATUS_STAT_BUSY), 50,
|
|
10000);
|
|
}
|
|
|
|
static int mscc_miim_wait_pending(struct mii_bus *bus)
|
|
{
|
|
u32 val;
|
|
|
|
return mscc_readx_poll_timeout(mscc_miim_status, bus, val,
|
|
!(val & MSCC_MIIM_STATUS_STAT_PENDING),
|
|
50, 10000);
|
|
}
|
|
|
|
static int mscc_miim_read(struct mii_bus *bus, int mii_id, int regnum)
|
|
{
|
|
struct mscc_miim_dev *miim = bus->priv;
|
|
u32 val;
|
|
int ret;
|
|
|
|
if (regnum & MII_ADDR_C45)
|
|
return -EOPNOTSUPP;
|
|
|
|
ret = mscc_miim_wait_pending(bus);
|
|
if (ret)
|
|
goto out;
|
|
|
|
ret = regmap_write(miim->regs,
|
|
MSCC_MIIM_REG_CMD + miim->mii_status_offset,
|
|
MSCC_MIIM_CMD_VLD |
|
|
(mii_id << MSCC_MIIM_CMD_PHYAD_SHIFT) |
|
|
(regnum << MSCC_MIIM_CMD_REGAD_SHIFT) |
|
|
MSCC_MIIM_CMD_OPR_READ);
|
|
|
|
if (ret < 0) {
|
|
WARN_ONCE(1, "mscc miim write cmd reg error %d\n", ret);
|
|
goto out;
|
|
}
|
|
|
|
ret = mscc_miim_wait_ready(bus);
|
|
if (ret)
|
|
goto out;
|
|
|
|
ret = regmap_read(miim->regs,
|
|
MSCC_MIIM_REG_DATA + miim->mii_status_offset, &val);
|
|
if (ret < 0) {
|
|
WARN_ONCE(1, "mscc miim read data reg error %d\n", ret);
|
|
goto out;
|
|
}
|
|
|
|
if (val & MSCC_MIIM_DATA_ERROR) {
|
|
ret = -EIO;
|
|
goto out;
|
|
}
|
|
|
|
ret = val & 0xFFFF;
|
|
out:
|
|
return ret;
|
|
}
|
|
|
|
static int mscc_miim_write(struct mii_bus *bus, int mii_id,
|
|
int regnum, u16 value)
|
|
{
|
|
struct mscc_miim_dev *miim = bus->priv;
|
|
int ret;
|
|
|
|
if (regnum & MII_ADDR_C45)
|
|
return -EOPNOTSUPP;
|
|
|
|
ret = mscc_miim_wait_pending(bus);
|
|
if (ret < 0)
|
|
goto out;
|
|
|
|
ret = regmap_write(miim->regs,
|
|
MSCC_MIIM_REG_CMD + miim->mii_status_offset,
|
|
MSCC_MIIM_CMD_VLD |
|
|
(mii_id << MSCC_MIIM_CMD_PHYAD_SHIFT) |
|
|
(regnum << MSCC_MIIM_CMD_REGAD_SHIFT) |
|
|
(value << MSCC_MIIM_CMD_WRDATA_SHIFT) |
|
|
MSCC_MIIM_CMD_OPR_WRITE);
|
|
|
|
if (ret < 0)
|
|
WARN_ONCE(1, "mscc miim write error %d\n", ret);
|
|
out:
|
|
return ret;
|
|
}
|
|
|
|
static int mscc_miim_reset(struct mii_bus *bus)
|
|
{
|
|
struct mscc_miim_dev *miim = bus->priv;
|
|
unsigned int offset, bits;
|
|
int ret;
|
|
|
|
if (!miim->phy_regs)
|
|
return 0;
|
|
|
|
offset = miim->info->phy_reset_offset;
|
|
bits = miim->info->phy_reset_bits;
|
|
|
|
ret = regmap_update_bits(miim->phy_regs, offset, bits, 0);
|
|
if (ret < 0) {
|
|
WARN_ONCE(1, "mscc reset set error %d\n", ret);
|
|
return ret;
|
|
}
|
|
|
|
ret = regmap_update_bits(miim->phy_regs, offset, bits, bits);
|
|
if (ret < 0) {
|
|
WARN_ONCE(1, "mscc reset clear error %d\n", ret);
|
|
return ret;
|
|
}
|
|
|
|
mdelay(500);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static const struct regmap_config mscc_miim_regmap_config = {
|
|
.reg_bits = 32,
|
|
.val_bits = 32,
|
|
.reg_stride = 4,
|
|
};
|
|
|
|
static const struct regmap_config mscc_miim_phy_regmap_config = {
|
|
.reg_bits = 32,
|
|
.val_bits = 32,
|
|
.reg_stride = 4,
|
|
.name = "phy",
|
|
};
|
|
|
|
int mscc_miim_setup(struct device *dev, struct mii_bus **pbus, const char *name,
|
|
struct regmap *mii_regmap, int status_offset)
|
|
{
|
|
struct mscc_miim_dev *miim;
|
|
struct mii_bus *bus;
|
|
|
|
bus = devm_mdiobus_alloc_size(dev, sizeof(*miim));
|
|
if (!bus)
|
|
return -ENOMEM;
|
|
|
|
bus->name = name;
|
|
bus->read = mscc_miim_read;
|
|
bus->write = mscc_miim_write;
|
|
bus->reset = mscc_miim_reset;
|
|
snprintf(bus->id, MII_BUS_ID_SIZE, "%s-mii", dev_name(dev));
|
|
bus->parent = dev;
|
|
|
|
miim = bus->priv;
|
|
|
|
*pbus = bus;
|
|
|
|
miim->regs = mii_regmap;
|
|
miim->mii_status_offset = status_offset;
|
|
|
|
*pbus = bus;
|
|
|
|
return 0;
|
|
}
|
|
EXPORT_SYMBOL(mscc_miim_setup);
|
|
|
|
static int mscc_miim_clk_set(struct mii_bus *bus)
|
|
{
|
|
struct mscc_miim_dev *miim = bus->priv;
|
|
unsigned long rate;
|
|
u32 div;
|
|
|
|
/* Keep the current settings */
|
|
if (!miim->bus_freq)
|
|
return 0;
|
|
|
|
rate = clk_get_rate(miim->clk);
|
|
|
|
div = DIV_ROUND_UP(rate, 2 * miim->bus_freq) - 1;
|
|
if (div == 0 || div & ~MSCC_MIIM_CFG_PRESCALE_MASK) {
|
|
dev_err(&bus->dev, "Incorrect MDIO clock frequency\n");
|
|
return -EINVAL;
|
|
}
|
|
|
|
return regmap_update_bits(miim->regs, MSCC_MIIM_REG_CFG,
|
|
MSCC_MIIM_CFG_PRESCALE_MASK, div);
|
|
}
|
|
|
|
static int mscc_miim_probe(struct platform_device *pdev)
|
|
{
|
|
struct device_node *np = pdev->dev.of_node;
|
|
struct regmap *mii_regmap, *phy_regmap;
|
|
struct device *dev = &pdev->dev;
|
|
struct mscc_miim_dev *miim;
|
|
struct mii_bus *bus;
|
|
int ret;
|
|
|
|
mii_regmap = ocelot_regmap_from_resource(pdev, 0,
|
|
&mscc_miim_regmap_config);
|
|
if (IS_ERR(mii_regmap))
|
|
return dev_err_probe(dev, PTR_ERR(mii_regmap),
|
|
"Unable to create MIIM regmap\n");
|
|
|
|
/* This resource is optional */
|
|
phy_regmap = ocelot_regmap_from_resource_optional(pdev, 1,
|
|
&mscc_miim_phy_regmap_config);
|
|
if (IS_ERR(phy_regmap))
|
|
return dev_err_probe(dev, PTR_ERR(phy_regmap),
|
|
"Unable to create phy register regmap\n");
|
|
|
|
ret = mscc_miim_setup(dev, &bus, "mscc_miim", mii_regmap, 0);
|
|
if (ret < 0) {
|
|
dev_err(dev, "Unable to setup the MDIO bus\n");
|
|
return ret;
|
|
}
|
|
|
|
miim = bus->priv;
|
|
miim->phy_regs = phy_regmap;
|
|
|
|
miim->info = device_get_match_data(dev);
|
|
if (!miim->info)
|
|
return -EINVAL;
|
|
|
|
miim->clk = devm_clk_get_optional(dev, NULL);
|
|
if (IS_ERR(miim->clk))
|
|
return PTR_ERR(miim->clk);
|
|
|
|
of_property_read_u32(np, "clock-frequency", &miim->bus_freq);
|
|
|
|
if (miim->bus_freq && !miim->clk) {
|
|
dev_err(dev, "cannot use clock-frequency without a clock\n");
|
|
return -EINVAL;
|
|
}
|
|
|
|
ret = clk_prepare_enable(miim->clk);
|
|
if (ret)
|
|
return ret;
|
|
|
|
ret = mscc_miim_clk_set(bus);
|
|
if (ret)
|
|
goto out_disable_clk;
|
|
|
|
ret = of_mdiobus_register(bus, np);
|
|
if (ret < 0) {
|
|
dev_err(dev, "Cannot register MDIO bus (%d)\n", ret);
|
|
goto out_disable_clk;
|
|
}
|
|
|
|
platform_set_drvdata(pdev, bus);
|
|
|
|
return 0;
|
|
|
|
out_disable_clk:
|
|
clk_disable_unprepare(miim->clk);
|
|
return ret;
|
|
}
|
|
|
|
static int mscc_miim_remove(struct platform_device *pdev)
|
|
{
|
|
struct mii_bus *bus = platform_get_drvdata(pdev);
|
|
struct mscc_miim_dev *miim = bus->priv;
|
|
|
|
clk_disable_unprepare(miim->clk);
|
|
mdiobus_unregister(bus);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static const struct mscc_miim_info mscc_ocelot_miim_info = {
|
|
.phy_reset_offset = MSCC_PHY_REG_PHY_CFG,
|
|
.phy_reset_bits = PHY_CFG_PHY_ENA | PHY_CFG_PHY_COMMON_RESET |
|
|
PHY_CFG_PHY_RESET,
|
|
};
|
|
|
|
static const struct mscc_miim_info microchip_lan966x_miim_info = {
|
|
.phy_reset_offset = LAN966X_CUPHY_COMMON_CFG,
|
|
.phy_reset_bits = CUPHY_COMMON_CFG_RESET_N,
|
|
};
|
|
|
|
static const struct of_device_id mscc_miim_match[] = {
|
|
{
|
|
.compatible = "mscc,ocelot-miim",
|
|
.data = &mscc_ocelot_miim_info
|
|
}, {
|
|
.compatible = "microchip,lan966x-miim",
|
|
.data = µchip_lan966x_miim_info
|
|
},
|
|
{ }
|
|
};
|
|
MODULE_DEVICE_TABLE(of, mscc_miim_match);
|
|
|
|
static struct platform_driver mscc_miim_driver = {
|
|
.probe = mscc_miim_probe,
|
|
.remove = mscc_miim_remove,
|
|
.driver = {
|
|
.name = "mscc-miim",
|
|
.of_match_table = mscc_miim_match,
|
|
},
|
|
};
|
|
|
|
module_platform_driver(mscc_miim_driver);
|
|
|
|
MODULE_DESCRIPTION("Microsemi MIIM driver");
|
|
MODULE_AUTHOR("Alexandre Belloni <alexandre.belloni@bootlin.com>");
|
|
MODULE_LICENSE("Dual MIT/GPL");
|