UbiquitousOS
/
OpenCloudOS-Kernel
mirror of https://gitee.com/OpenCloudOS/OpenCloudOS-Kernel.git
11
0
Fork 0
Code Issues Projects Releases Wiki Activity
OpenCloudOS-Kernel/drivers/net/phy
History
Holger Hoffstätte 0432e83319 net: phy: realtek: fix RTL8201F sysfs name 
Since 4.19 the following error in sysfs has appeared when using the
r8169 NIC driver:

$cd /sys/module/realtek/drivers
$ls -l
ls: cannot access 'mdio_bus:RTL8201F 10/100Mbps Ethernet': No such file or directory
[..garbled dir entries follow..]

Apparently the forward slash in "10/100Mbps Ethernet" is interpreted
as directory separator that leads nowhere, and was introduced in commit
513588dd44 ("net: phy: realtek: add RTL8201F phy-id and functions").

Fix this by removing the offending slash in the driver name.

Other drivers in net/phy seem to have the same problem, but I cannot
test/verify them.

Fixes: 513588dd44 ("net: phy: realtek: add RTL8201F phy-id and functions")
Signed-off-by: Holger Hoffstätte <holger@applied-asynchrony.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: David S. Miller <davem@davemloft.net>
 		2018-11-04 16:43:17 -08:00
..
Kconfig net: phy: bcm63xx: Allow to be built with COMPILE_TEST 2018-09-12 20:24:20 -07:00
Makefile net: phy: mscc-miim: Add MDIO driver 2018-05-15 16:41:15 -04:00
amd.c net: phy: remove generic settings for callbacks config_aneg and read_status from drivers 2017-12-01 15:42:21 -05:00
aquantia.c net: phy: Replace phy driver features u32 with link_mode bitmap 2018-10-01 22:55:36 -07:00
asix.c net-next: phy: new Asix Electronics PHY driver 2018-04-19 16:11:10 -04:00
at803x.c net: phy: Add phydev_warn() 2018-10-01 22:55:35 -07:00
bcm-cygnus.c net: phy: broadcom: Fix bcm_write_exp() 2018-05-23 15:27:01 -04:00
bcm-phy-lib.c Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net 2018-05-26 19:46:15 -04:00
bcm-phy-lib.h net: phy: broadcom: Fix bcm_write_exp() 2018-05-23 15:27:01 -04:00
bcm7xxx.c net: phy: Add support for Broadcom Omega internal Combo GPHY 2018-08-07 15:48:38 -07:00
bcm63xx.c net: phy: Replace phy driver features u32 with link_mode bitmap 2018-10-01 22:55:36 -07:00
bcm87xx.c
…
broadcom.c net: phy: broadcom: Enable 125 MHz clock on LED4 pin for BCM54612E by default. 2018-06-05 09:43:09 -04:00
cicada.c net: phy: remove generic settings for callbacks config_aneg and read_status from drivers 2017-12-01 15:42:21 -05:00
cortina.c net: phy: cortina: Utilize generic functions 2018-03-01 21:23:35 -05:00
davicom.c net: phy: remove generic settings for callbacks config_aneg and read_status from drivers 2017-12-01 15:42:21 -05:00
dp83tc811.c net: phy: DP83TC811: Fix SGMII enable/disable 2018-07-03 11:38:07 +09:00
dp83640.c net: phy: Add phydev_info() 2018-10-01 22:55:36 -07:00
dp83640_reg.h License cleanup: add SPDX GPL-2.0 license identifier to files with no license 2017-11-02 11:10:55 +01:00
dp83822.c net: phy: remove generic settings for callbacks config_aneg and read_status from drivers 2017-12-01 15:42:21 -05:00
dp83848.c net: phy: dp83822: use BMCR_ANENABLE instead of BMSR_ANEGCAPABLE for DP83620 2018-06-10 12:38:03 -07:00
dp83867.c net: phy: dp83867: Add binding for the CLK_OUT pin muxing option 2018-02-14 15:33:43 -05:00
et1011c.c net: phy: et011c: Remove incorrect PHY_POLL flags 2018-09-16 15:31:01 -07:00
fixed_phy.c net: phy: fixed-phy: Make the error path simpler 2018-06-24 16:41:58 +09:00
icplus.c net: phy: remove generic settings for callbacks config_aneg and read_status from drivers 2017-12-01 15:42:21 -05:00
intel-xway.c net: phy: intel-xway: add VR9 v1.1 phy ids 2018-03-23 13:19:49 -04:00
lxt.c net: phy: remove generic settings for callbacks config_aneg and read_status from drivers 2017-12-01 15:42:21 -05:00
marvell.c net: phy: Replace phy driver features u32 with link_mode bitmap 2018-10-01 22:55:36 -07:00
marvell10g.c net: phy: Replace phy driver features u32 with link_mode bitmap 2018-10-01 22:55:36 -07:00
mdio-bcm-iproc.c net: phy: Initialize mdio clock at probe function 2017-02-09 17:10:23 -05:00
mdio-bcm-unimac.c net: phy: mdio-bcm-unimac: mark PM functions as __maybe_unused 2018-09-28 10:25:11 -07:00
mdio-bitbang.c net: phy: mdio-bitbang: Remove reset support 2018-04-19 15:59:10 -04:00
mdio-boardinfo.c net: phy: mdio-boardinfo: Allow recursive mdiobus_register() 2018-04-20 10:33:26 -04:00
mdio-boardinfo.h License cleanup: add SPDX GPL-2.0 license identifier to files with no license 2017-11-02 11:10:55 +01:00
mdio-cavium.c
…
mdio-cavium.h
…
mdio-gpio.c net: phy: mdio-gpio: Cut surplus includes 2018-06-12 15:23:55 -07:00
mdio-hisi-femac.c
…
mdio-i2c.c net: phy: add I2C mdio bus 2017-08-06 20:55:28 -07:00
mdio-i2c.h net: phy: add I2C mdio bus 2017-08-06 20:55:28 -07:00
mdio-moxart.c
…
mdio-mscc-miim.c drivers: net: Remove device_node checks with of_mdiobus_register() 2018-05-16 14:20:36 -04:00
mdio-mux-bcm-iproc.c net: phy: mdio-mux-bcm-iproc: simplify getting .driver_data 2018-10-21 21:10:12 -07:00
mdio-mux-gpio.c gpiolib: Pass array info to get/set array functions 2018-09-13 11:16:54 +02:00
mdio-mux-mmioreg.c net: phy: mdio-mux: slience probe defer error 2018-03-07 12:39:59 -05:00
mdio-mux.c net: mdio-mux: add mdio_mux parameter to mdio_mux_init() 2017-09-05 14:42:52 -07:00
mdio-octeon.c
…
mdio-sun4i.c mdio-sun4i: Fix a memory leak 2018-01-08 14:30:28 -05:00
mdio-thunder.c net: phy: Convert to using %pOFn instead of device_node.name 2018-10-01 23:29:37 -07:00
mdio-xgene.c net: phy: xgene: disable clk on error paths 2017-12-18 15:09:42 -05:00
mdio-xgene.h drivers: net: phy: xgene: Add lock to protect mac access 2017-05-16 11:41:08 -04:00
mdio_bus.c net: mdio: remove duplicated include from mdio_bus.c 2018-09-17 19:52:44 -07:00
mdio_device.c phylib: rename reset-(post-)delay-us to reset-(de)assert-us 2017-12-27 11:06:50 -05:00
meson-gxl.c net: phy: meson-gxl: join the authors 2017-12-18 13:24:56 -05:00
micrel.c net: phy: micrel: add Microchip KSZ9131 initial driver 2018-10-19 17:02:23 -07:00
microchip.c net: phy: Add phydev_warn() 2018-10-01 22:55:35 -07:00
microchip_t1.c net: phy: Replace phy driver features u32 with link_mode bitmap 2018-10-01 22:55:36 -07:00
mscc.c net: phy: mscc: fix memory leak in vsc8574_config_pre_init 2018-10-17 22:08:55 -07:00
national.c net: phy: remove generic settings for callbacks config_aneg and read_status from drivers 2017-12-01 15:42:21 -05:00
phy-c45.c net: phy: genphy_10g_driver: Avoid NULL pointer dereference 2018-10-25 16:19:09 -07:00
phy-core.c net: phy: Fix spelling mistake: "advertisment"-> "advertisement" 2018-03-04 18:11:54 -05:00
phy.c net: phy: merge phy_start_aneg and phy_start_aneg_priv 2018-10-15 23:13:07 -07:00
phy_device.c net: phy: phy_support_sym_pause: Clear Asym Pause 2018-10-22 19:38:22 -07:00
phy_led_triggers.c treewide: devm_kzalloc() -> devm_kcalloc() 2018-06-12 16:19:22 -07:00
phylink.c Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net 2018-10-06 14:43:42 -07:00
qsemi.c net: phy: remove generic settings for callbacks config_aneg and read_status from drivers 2017-12-01 15:42:21 -05:00
realtek.c net: phy: realtek: fix RTL8201F sysfs name 2018-11-04 16:43:17 -08:00
rockchip.c net: phy: remove generic settings for callbacks config_aneg and read_status from drivers 2017-12-01 15:42:21 -05:00
sfp-bus.c sfp: fix oops with ethtool -m 2018-09-18 20:14:19 -07:00
sfp.c net: phy: sfp: remove sfp_mutex's definition 2018-10-11 12:10:06 -07:00
sfp.h sfp: add sfp-bus to bridge between network devices and sfp cages 2017-08-06 20:55:29 -07:00
smsc.c drivers: net: replace UINT64_MAX with U64_MAX 2018-04-27 20:18:55 -04:00
spi_ks8995.c drivers/net: Use octal not symbolic permissions 2018-03-26 12:07:49 -04:00
ste10Xp.c net: phy: ste10Xp: Remove wrong SUPPORTED_Pause 2018-09-12 20:24:20 -07:00
swphy.c
…
swphy.h License cleanup: add SPDX GPL-2.0 license identifier to files with no license 2017-11-02 11:10:55 +01:00
teranetics.c net: phy: teranetics: Utilize generic functions 2018-03-01 21:23:34 -05:00
uPD60620.c net: phy: remove generic settings for callbacks config_aneg and read_status from drivers 2017-12-01 15:42:21 -05:00
vitesse.c net: phy: vitesse: Add support for VSC73xx 2018-07-04 11:30:02 +09:00
xilinx_gmii2rgmii.c net: phy: xgmiitorgmii: Check read_status results 2018-06-28 16:12:06 +09:00