1008 lines
25 KiB
C
1008 lines
25 KiB
C
// SPDX-License-Identifier: GPL-2.0
|
|
/*
|
|
* PLL clock driver for TI Davinci SoCs
|
|
*
|
|
* Copyright (C) 2018 David Lechner <david@lechnology.com>
|
|
*
|
|
* Based on arch/arm/mach-davinci/clock.c
|
|
* Copyright (C) 2006-2007 Texas Instruments.
|
|
* Copyright (C) 2008-2009 Deep Root Systems, LLC
|
|
*/
|
|
|
|
#include <linux/clk-provider.h>
|
|
#include <linux/clk.h>
|
|
#include <linux/clk/davinci.h>
|
|
#include <linux/delay.h>
|
|
#include <linux/err.h>
|
|
#include <linux/io.h>
|
|
#include <linux/kernel.h>
|
|
#include <linux/mfd/syscon.h>
|
|
#include <linux/notifier.h>
|
|
#include <linux/of_address.h>
|
|
#include <linux/of_device.h>
|
|
#include <linux/of.h>
|
|
#include <linux/platform_data/clk-davinci-pll.h>
|
|
#include <linux/platform_device.h>
|
|
#include <linux/regmap.h>
|
|
#include <linux/slab.h>
|
|
#include <linux/types.h>
|
|
|
|
#include "pll.h"
|
|
|
|
#define MAX_NAME_SIZE 20
|
|
#define OSCIN_CLK_NAME "oscin"
|
|
|
|
#define REVID 0x000
|
|
#define PLLCTL 0x100
|
|
#define OCSEL 0x104
|
|
#define PLLSECCTL 0x108
|
|
#define PLLM 0x110
|
|
#define PREDIV 0x114
|
|
#define PLLDIV1 0x118
|
|
#define PLLDIV2 0x11c
|
|
#define PLLDIV3 0x120
|
|
#define OSCDIV 0x124
|
|
#define POSTDIV 0x128
|
|
#define BPDIV 0x12c
|
|
#define PLLCMD 0x138
|
|
#define PLLSTAT 0x13c
|
|
#define ALNCTL 0x140
|
|
#define DCHANGE 0x144
|
|
#define CKEN 0x148
|
|
#define CKSTAT 0x14c
|
|
#define SYSTAT 0x150
|
|
#define PLLDIV4 0x160
|
|
#define PLLDIV5 0x164
|
|
#define PLLDIV6 0x168
|
|
#define PLLDIV7 0x16c
|
|
#define PLLDIV8 0x170
|
|
#define PLLDIV9 0x174
|
|
|
|
#define PLLCTL_PLLEN BIT(0)
|
|
#define PLLCTL_PLLPWRDN BIT(1)
|
|
#define PLLCTL_PLLRST BIT(3)
|
|
#define PLLCTL_PLLDIS BIT(4)
|
|
#define PLLCTL_PLLENSRC BIT(5)
|
|
#define PLLCTL_CLKMODE BIT(8)
|
|
|
|
/* shared by most *DIV registers */
|
|
#define DIV_RATIO_SHIFT 0
|
|
#define DIV_RATIO_WIDTH 5
|
|
#define DIV_ENABLE_SHIFT 15
|
|
|
|
#define PLLCMD_GOSET BIT(0)
|
|
#define PLLSTAT_GOSTAT BIT(0)
|
|
|
|
#define CKEN_OBSCLK_SHIFT 1
|
|
#define CKEN_AUXEN_SHIFT 0
|
|
|
|
/*
|
|
* OMAP-L138 system reference guide recommends a wait for 4 OSCIN/CLKIN
|
|
* cycles to ensure that the PLLC has switched to bypass mode. Delay of 1us
|
|
* ensures we are good for all > 4MHz OSCIN/CLKIN inputs. Typically the input
|
|
* is ~25MHz. Units are micro seconds.
|
|
*/
|
|
#define PLL_BYPASS_TIME 1
|
|
|
|
/* From OMAP-L138 datasheet table 6-4. Units are micro seconds */
|
|
#define PLL_RESET_TIME 1
|
|
|
|
/*
|
|
* From OMAP-L138 datasheet table 6-4; assuming prediv = 1, sqrt(pllm) = 4
|
|
* Units are micro seconds.
|
|
*/
|
|
#define PLL_LOCK_TIME 20
|
|
|
|
/**
|
|
* struct davinci_pll_clk - Main PLL clock (aka PLLOUT)
|
|
* @hw: clk_hw for the pll
|
|
* @base: Base memory address
|
|
* @pllm_min: The minimum allowable PLLM[PLLM] value
|
|
* @pllm_max: The maxiumum allowable PLLM[PLLM] value
|
|
* @pllm_mask: Bitmask for PLLM[PLLM] value
|
|
*/
|
|
struct davinci_pll_clk {
|
|
struct clk_hw hw;
|
|
void __iomem *base;
|
|
u32 pllm_min;
|
|
u32 pllm_max;
|
|
u32 pllm_mask;
|
|
};
|
|
|
|
#define to_davinci_pll_clk(_hw) \
|
|
container_of((_hw), struct davinci_pll_clk, hw)
|
|
|
|
static unsigned long davinci_pll_recalc_rate(struct clk_hw *hw,
|
|
unsigned long parent_rate)
|
|
{
|
|
struct davinci_pll_clk *pll = to_davinci_pll_clk(hw);
|
|
unsigned long rate = parent_rate;
|
|
u32 mult;
|
|
|
|
mult = readl(pll->base + PLLM) & pll->pllm_mask;
|
|
rate *= mult + 1;
|
|
|
|
return rate;
|
|
}
|
|
|
|
static int davinci_pll_determine_rate(struct clk_hw *hw,
|
|
struct clk_rate_request *req)
|
|
{
|
|
struct davinci_pll_clk *pll = to_davinci_pll_clk(hw);
|
|
struct clk_hw *parent = req->best_parent_hw;
|
|
unsigned long parent_rate = req->best_parent_rate;
|
|
unsigned long rate = req->rate;
|
|
unsigned long best_rate, r;
|
|
u32 mult;
|
|
|
|
/* there is a limited range of valid outputs (see datasheet) */
|
|
if (rate < req->min_rate)
|
|
return -EINVAL;
|
|
|
|
rate = min(rate, req->max_rate);
|
|
mult = rate / parent_rate;
|
|
best_rate = parent_rate * mult;
|
|
|
|
/* easy case when there is no PREDIV */
|
|
if (!(clk_hw_get_flags(hw) & CLK_SET_RATE_PARENT)) {
|
|
if (best_rate < req->min_rate)
|
|
return -EINVAL;
|
|
|
|
if (mult < pll->pllm_min || mult > pll->pllm_max)
|
|
return -EINVAL;
|
|
|
|
req->rate = best_rate;
|
|
|
|
return 0;
|
|
}
|
|
|
|
/* see if the PREDIV clock can help us */
|
|
best_rate = 0;
|
|
|
|
for (mult = pll->pllm_min; mult <= pll->pllm_max; mult++) {
|
|
parent_rate = clk_hw_round_rate(parent, rate / mult);
|
|
r = parent_rate * mult;
|
|
if (r < req->min_rate)
|
|
continue;
|
|
if (r > rate || r > req->max_rate)
|
|
break;
|
|
if (r > best_rate) {
|
|
best_rate = r;
|
|
req->rate = best_rate;
|
|
req->best_parent_rate = parent_rate;
|
|
if (best_rate == rate)
|
|
break;
|
|
}
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int davinci_pll_set_rate(struct clk_hw *hw, unsigned long rate,
|
|
unsigned long parent_rate)
|
|
{
|
|
struct davinci_pll_clk *pll = to_davinci_pll_clk(hw);
|
|
u32 mult;
|
|
|
|
mult = rate / parent_rate;
|
|
writel(mult - 1, pll->base + PLLM);
|
|
|
|
return 0;
|
|
}
|
|
|
|
#ifdef CONFIG_DEBUG_FS
|
|
static void davinci_pll_debug_init(struct clk_hw *hw, struct dentry *dentry);
|
|
#else
|
|
#define davinci_pll_debug_init NULL
|
|
#endif
|
|
|
|
static const struct clk_ops davinci_pll_ops = {
|
|
.recalc_rate = davinci_pll_recalc_rate,
|
|
.determine_rate = davinci_pll_determine_rate,
|
|
.set_rate = davinci_pll_set_rate,
|
|
.debug_init = davinci_pll_debug_init,
|
|
};
|
|
|
|
/* PLLM works differently on DM365 */
|
|
static unsigned long dm365_pll_recalc_rate(struct clk_hw *hw,
|
|
unsigned long parent_rate)
|
|
{
|
|
struct davinci_pll_clk *pll = to_davinci_pll_clk(hw);
|
|
unsigned long rate = parent_rate;
|
|
u32 mult;
|
|
|
|
mult = readl(pll->base + PLLM) & pll->pllm_mask;
|
|
rate *= mult * 2;
|
|
|
|
return rate;
|
|
}
|
|
|
|
static const struct clk_ops dm365_pll_ops = {
|
|
.recalc_rate = dm365_pll_recalc_rate,
|
|
.debug_init = davinci_pll_debug_init,
|
|
};
|
|
|
|
/**
|
|
* davinci_pll_div_register - common *DIV clock implementation
|
|
* @dev: The PLL platform device or NULL
|
|
* @name: the clock name
|
|
* @parent_name: the parent clock name
|
|
* @reg: the *DIV register
|
|
* @fixed: if true, the divider is a fixed value
|
|
* @flags: bitmap of CLK_* flags from clock-provider.h
|
|
*/
|
|
static struct clk *davinci_pll_div_register(struct device *dev,
|
|
const char *name,
|
|
const char *parent_name,
|
|
void __iomem *reg,
|
|
bool fixed, u32 flags)
|
|
{
|
|
const char * const *parent_names = parent_name ? &parent_name : NULL;
|
|
int num_parents = parent_name ? 1 : 0;
|
|
const struct clk_ops *divider_ops = &clk_divider_ops;
|
|
struct clk_gate *gate;
|
|
struct clk_divider *divider;
|
|
struct clk *clk;
|
|
int ret;
|
|
|
|
gate = kzalloc(sizeof(*gate), GFP_KERNEL);
|
|
if (!gate)
|
|
return ERR_PTR(-ENOMEM);
|
|
|
|
gate->reg = reg;
|
|
gate->bit_idx = DIV_ENABLE_SHIFT;
|
|
|
|
divider = kzalloc(sizeof(*divider), GFP_KERNEL);
|
|
if (!divider) {
|
|
ret = -ENOMEM;
|
|
goto err_free_gate;
|
|
}
|
|
|
|
divider->reg = reg;
|
|
divider->shift = DIV_RATIO_SHIFT;
|
|
divider->width = DIV_RATIO_WIDTH;
|
|
|
|
if (fixed) {
|
|
divider->flags |= CLK_DIVIDER_READ_ONLY;
|
|
divider_ops = &clk_divider_ro_ops;
|
|
}
|
|
|
|
clk = clk_register_composite(dev, name, parent_names, num_parents,
|
|
NULL, NULL, ÷r->hw, divider_ops,
|
|
&gate->hw, &clk_gate_ops, flags);
|
|
if (IS_ERR(clk)) {
|
|
ret = PTR_ERR(clk);
|
|
goto err_free_divider;
|
|
}
|
|
|
|
return clk;
|
|
|
|
err_free_divider:
|
|
kfree(divider);
|
|
err_free_gate:
|
|
kfree(gate);
|
|
|
|
return ERR_PTR(ret);
|
|
}
|
|
|
|
struct davinci_pllen_clk {
|
|
struct clk_hw hw;
|
|
void __iomem *base;
|
|
};
|
|
|
|
#define to_davinci_pllen_clk(_hw) \
|
|
container_of((_hw), struct davinci_pllen_clk, hw)
|
|
|
|
static const struct clk_ops davinci_pllen_ops = {
|
|
/* this clocks just uses the clock notification feature */
|
|
};
|
|
|
|
/*
|
|
* The PLL has to be switched into bypass mode while we are chaning the rate,
|
|
* so we do that on the PLLEN clock since it is the end of the line. This will
|
|
* switch to bypass before any of the parent clocks (PREDIV, PLL, POSTDIV) are
|
|
* changed and will switch back to the PLL after the changes have been made.
|
|
*/
|
|
static int davinci_pllen_rate_change(struct notifier_block *nb,
|
|
unsigned long flags, void *data)
|
|
{
|
|
struct clk_notifier_data *cnd = data;
|
|
struct clk_hw *hw = __clk_get_hw(cnd->clk);
|
|
struct davinci_pllen_clk *pll = to_davinci_pllen_clk(hw);
|
|
u32 ctrl;
|
|
|
|
ctrl = readl(pll->base + PLLCTL);
|
|
|
|
if (flags == PRE_RATE_CHANGE) {
|
|
/* Switch the PLL to bypass mode */
|
|
ctrl &= ~(PLLCTL_PLLENSRC | PLLCTL_PLLEN);
|
|
writel(ctrl, pll->base + PLLCTL);
|
|
|
|
udelay(PLL_BYPASS_TIME);
|
|
|
|
/* Reset and enable PLL */
|
|
ctrl &= ~(PLLCTL_PLLRST | PLLCTL_PLLDIS);
|
|
writel(ctrl, pll->base + PLLCTL);
|
|
} else {
|
|
udelay(PLL_RESET_TIME);
|
|
|
|
/* Bring PLL out of reset */
|
|
ctrl |= PLLCTL_PLLRST;
|
|
writel(ctrl, pll->base + PLLCTL);
|
|
|
|
udelay(PLL_LOCK_TIME);
|
|
|
|
/* Remove PLL from bypass mode */
|
|
ctrl |= PLLCTL_PLLEN;
|
|
writel(ctrl, pll->base + PLLCTL);
|
|
}
|
|
|
|
return NOTIFY_OK;
|
|
}
|
|
|
|
static struct notifier_block davinci_pllen_notifier = {
|
|
.notifier_call = davinci_pllen_rate_change,
|
|
};
|
|
|
|
/**
|
|
* davinci_pll_clk_register - Register a PLL clock
|
|
* @dev: The PLL platform device or NULL
|
|
* @info: The device-specific clock info
|
|
* @parent_name: The parent clock name
|
|
* @base: The PLL's memory region
|
|
* @cfgchip: CFGCHIP syscon regmap for info->unlock_reg or NULL
|
|
*
|
|
* This creates a series of clocks that represent the PLL.
|
|
*
|
|
* OSCIN > [PREDIV >] PLL > [POSTDIV >] PLLEN
|
|
*
|
|
* - OSCIN is the parent clock (on secondary PLL, may come from primary PLL)
|
|
* - PREDIV and POSTDIV are optional (depends on the PLL controller)
|
|
* - PLL is the PLL output (aka PLLOUT)
|
|
* - PLLEN is the bypass multiplexer
|
|
*
|
|
* Returns: The PLLOUT clock or a negative error code.
|
|
*/
|
|
struct clk *davinci_pll_clk_register(struct device *dev,
|
|
const struct davinci_pll_clk_info *info,
|
|
const char *parent_name,
|
|
void __iomem *base,
|
|
struct regmap *cfgchip)
|
|
{
|
|
char prediv_name[MAX_NAME_SIZE];
|
|
char pllout_name[MAX_NAME_SIZE];
|
|
char postdiv_name[MAX_NAME_SIZE];
|
|
char pllen_name[MAX_NAME_SIZE];
|
|
struct clk_init_data init;
|
|
struct davinci_pll_clk *pllout;
|
|
struct davinci_pllen_clk *pllen;
|
|
struct clk *oscin_clk = NULL;
|
|
struct clk *prediv_clk = NULL;
|
|
struct clk *pllout_clk;
|
|
struct clk *postdiv_clk = NULL;
|
|
struct clk *pllen_clk;
|
|
int ret;
|
|
|
|
if (info->flags & PLL_HAS_CLKMODE) {
|
|
/*
|
|
* If a PLL has PLLCTL[CLKMODE], then it is the primary PLL.
|
|
* We register a clock named "oscin" that serves as the internal
|
|
* "input clock" domain shared by both PLLs (if there are 2)
|
|
* and will be the parent clock to the AUXCLK, SYSCLKBP and
|
|
* OBSCLK domains. NB: The various TRMs use "OSCIN" to mean
|
|
* a number of different things. In this driver we use it to
|
|
* mean the signal after the PLLCTL[CLKMODE] switch.
|
|
*/
|
|
oscin_clk = clk_register_fixed_factor(dev, OSCIN_CLK_NAME,
|
|
parent_name, 0, 1, 1);
|
|
if (IS_ERR(oscin_clk))
|
|
return oscin_clk;
|
|
|
|
parent_name = OSCIN_CLK_NAME;
|
|
}
|
|
|
|
if (info->flags & PLL_HAS_PREDIV) {
|
|
bool fixed = info->flags & PLL_PREDIV_FIXED_DIV;
|
|
u32 flags = 0;
|
|
|
|
snprintf(prediv_name, MAX_NAME_SIZE, "%s_prediv", info->name);
|
|
|
|
if (info->flags & PLL_PREDIV_ALWAYS_ENABLED)
|
|
flags |= CLK_IS_CRITICAL;
|
|
|
|
/* Some? DM355 chips don't correctly report the PREDIV value */
|
|
if (info->flags & PLL_PREDIV_FIXED8)
|
|
prediv_clk = clk_register_fixed_factor(dev, prediv_name,
|
|
parent_name, flags, 1, 8);
|
|
else
|
|
prediv_clk = davinci_pll_div_register(dev, prediv_name,
|
|
parent_name, base + PREDIV, fixed, flags);
|
|
if (IS_ERR(prediv_clk)) {
|
|
ret = PTR_ERR(prediv_clk);
|
|
goto err_unregister_oscin;
|
|
}
|
|
|
|
parent_name = prediv_name;
|
|
}
|
|
|
|
/* Unlock writing to PLL registers */
|
|
if (info->unlock_reg) {
|
|
if (IS_ERR_OR_NULL(cfgchip))
|
|
dev_warn(dev, "Failed to get CFGCHIP (%ld)\n",
|
|
PTR_ERR(cfgchip));
|
|
else
|
|
regmap_write_bits(cfgchip, info->unlock_reg,
|
|
info->unlock_mask, 0);
|
|
}
|
|
|
|
pllout = kzalloc(sizeof(*pllout), GFP_KERNEL);
|
|
if (!pllout) {
|
|
ret = -ENOMEM;
|
|
goto err_unregister_prediv;
|
|
}
|
|
|
|
snprintf(pllout_name, MAX_NAME_SIZE, "%s_pllout", info->name);
|
|
|
|
init.name = pllout_name;
|
|
if (info->flags & PLL_PLLM_2X)
|
|
init.ops = &dm365_pll_ops;
|
|
else
|
|
init.ops = &davinci_pll_ops;
|
|
init.parent_names = &parent_name;
|
|
init.num_parents = 1;
|
|
init.flags = 0;
|
|
|
|
if (info->flags & PLL_HAS_PREDIV)
|
|
init.flags |= CLK_SET_RATE_PARENT;
|
|
|
|
pllout->hw.init = &init;
|
|
pllout->base = base;
|
|
pllout->pllm_mask = info->pllm_mask;
|
|
pllout->pllm_min = info->pllm_min;
|
|
pllout->pllm_max = info->pllm_max;
|
|
|
|
pllout_clk = clk_register(dev, &pllout->hw);
|
|
if (IS_ERR(pllout_clk)) {
|
|
ret = PTR_ERR(pllout_clk);
|
|
goto err_free_pllout;
|
|
}
|
|
|
|
clk_hw_set_rate_range(&pllout->hw, info->pllout_min_rate,
|
|
info->pllout_max_rate);
|
|
|
|
parent_name = pllout_name;
|
|
|
|
if (info->flags & PLL_HAS_POSTDIV) {
|
|
bool fixed = info->flags & PLL_POSTDIV_FIXED_DIV;
|
|
u32 flags = CLK_SET_RATE_PARENT;
|
|
|
|
snprintf(postdiv_name, MAX_NAME_SIZE, "%s_postdiv", info->name);
|
|
|
|
if (info->flags & PLL_POSTDIV_ALWAYS_ENABLED)
|
|
flags |= CLK_IS_CRITICAL;
|
|
|
|
postdiv_clk = davinci_pll_div_register(dev, postdiv_name,
|
|
parent_name, base + POSTDIV, fixed, flags);
|
|
if (IS_ERR(postdiv_clk)) {
|
|
ret = PTR_ERR(postdiv_clk);
|
|
goto err_unregister_pllout;
|
|
}
|
|
|
|
parent_name = postdiv_name;
|
|
}
|
|
|
|
pllen = kzalloc(sizeof(*pllout), GFP_KERNEL);
|
|
if (!pllen) {
|
|
ret = -ENOMEM;
|
|
goto err_unregister_postdiv;
|
|
}
|
|
|
|
snprintf(pllen_name, MAX_NAME_SIZE, "%s_pllen", info->name);
|
|
|
|
init.name = pllen_name;
|
|
init.ops = &davinci_pllen_ops;
|
|
init.parent_names = &parent_name;
|
|
init.num_parents = 1;
|
|
init.flags = CLK_SET_RATE_PARENT;
|
|
|
|
pllen->hw.init = &init;
|
|
pllen->base = base;
|
|
|
|
pllen_clk = clk_register(dev, &pllen->hw);
|
|
if (IS_ERR(pllen_clk)) {
|
|
ret = PTR_ERR(pllen_clk);
|
|
goto err_free_pllen;
|
|
}
|
|
|
|
clk_notifier_register(pllen_clk, &davinci_pllen_notifier);
|
|
|
|
return pllout_clk;
|
|
|
|
err_free_pllen:
|
|
kfree(pllen);
|
|
err_unregister_postdiv:
|
|
clk_unregister(postdiv_clk);
|
|
err_unregister_pllout:
|
|
clk_unregister(pllout_clk);
|
|
err_free_pllout:
|
|
kfree(pllout);
|
|
err_unregister_prediv:
|
|
clk_unregister(prediv_clk);
|
|
err_unregister_oscin:
|
|
clk_unregister(oscin_clk);
|
|
|
|
return ERR_PTR(ret);
|
|
}
|
|
|
|
/**
|
|
* davinci_pll_auxclk_register - Register bypass clock (AUXCLK)
|
|
* @dev: The PLL platform device or NULL
|
|
* @name: The clock name
|
|
* @base: The PLL memory region
|
|
*/
|
|
struct clk *davinci_pll_auxclk_register(struct device *dev,
|
|
const char *name,
|
|
void __iomem *base)
|
|
{
|
|
return clk_register_gate(dev, name, OSCIN_CLK_NAME, 0, base + CKEN,
|
|
CKEN_AUXEN_SHIFT, 0, NULL);
|
|
}
|
|
|
|
/**
|
|
* davinci_pll_sysclkbp_clk_register - Register bypass divider clock (SYSCLKBP)
|
|
* @dev: The PLL platform device or NULL
|
|
* @name: The clock name
|
|
* @base: The PLL memory region
|
|
*/
|
|
struct clk *davinci_pll_sysclkbp_clk_register(struct device *dev,
|
|
const char *name,
|
|
void __iomem *base)
|
|
{
|
|
return clk_register_divider(dev, name, OSCIN_CLK_NAME, 0, base + BPDIV,
|
|
DIV_RATIO_SHIFT, DIV_RATIO_WIDTH,
|
|
CLK_DIVIDER_READ_ONLY, NULL);
|
|
}
|
|
|
|
/**
|
|
* davinci_pll_obsclk_register - Register oscillator divider clock (OBSCLK)
|
|
* @dev: The PLL platform device or NULL
|
|
* @info: The clock info
|
|
* @base: The PLL memory region
|
|
*/
|
|
struct clk *
|
|
davinci_pll_obsclk_register(struct device *dev,
|
|
const struct davinci_pll_obsclk_info *info,
|
|
void __iomem *base)
|
|
{
|
|
struct clk_mux *mux;
|
|
struct clk_gate *gate;
|
|
struct clk_divider *divider;
|
|
struct clk *clk;
|
|
u32 oscdiv;
|
|
int ret;
|
|
|
|
mux = kzalloc(sizeof(*mux), GFP_KERNEL);
|
|
if (!mux)
|
|
return ERR_PTR(-ENOMEM);
|
|
|
|
mux->reg = base + OCSEL;
|
|
mux->table = info->table;
|
|
mux->mask = info->ocsrc_mask;
|
|
|
|
gate = kzalloc(sizeof(*gate), GFP_KERNEL);
|
|
if (!gate) {
|
|
ret = -ENOMEM;
|
|
goto err_free_mux;
|
|
}
|
|
|
|
gate->reg = base + CKEN;
|
|
gate->bit_idx = CKEN_OBSCLK_SHIFT;
|
|
|
|
divider = kzalloc(sizeof(*divider), GFP_KERNEL);
|
|
if (!divider) {
|
|
ret = -ENOMEM;
|
|
goto err_free_gate;
|
|
}
|
|
|
|
divider->reg = base + OSCDIV;
|
|
divider->shift = DIV_RATIO_SHIFT;
|
|
divider->width = DIV_RATIO_WIDTH;
|
|
|
|
/* make sure divider is enabled just in case bootloader disabled it */
|
|
oscdiv = readl(base + OSCDIV);
|
|
oscdiv |= BIT(DIV_ENABLE_SHIFT);
|
|
writel(oscdiv, base + OSCDIV);
|
|
|
|
clk = clk_register_composite(dev, info->name, info->parent_names,
|
|
info->num_parents,
|
|
&mux->hw, &clk_mux_ops,
|
|
÷r->hw, &clk_divider_ops,
|
|
&gate->hw, &clk_gate_ops, 0);
|
|
|
|
if (IS_ERR(clk)) {
|
|
ret = PTR_ERR(clk);
|
|
goto err_free_divider;
|
|
}
|
|
|
|
return clk;
|
|
|
|
err_free_divider:
|
|
kfree(divider);
|
|
err_free_gate:
|
|
kfree(gate);
|
|
err_free_mux:
|
|
kfree(mux);
|
|
|
|
return ERR_PTR(ret);
|
|
}
|
|
|
|
/* The PLL SYSCLKn clocks have a mechanism for synchronizing rate changes. */
|
|
static int davinci_pll_sysclk_rate_change(struct notifier_block *nb,
|
|
unsigned long flags, void *data)
|
|
{
|
|
struct clk_notifier_data *cnd = data;
|
|
struct clk_hw *hw = __clk_get_hw(clk_get_parent(cnd->clk));
|
|
struct davinci_pllen_clk *pll = to_davinci_pllen_clk(hw);
|
|
u32 pllcmd, pllstat;
|
|
|
|
switch (flags) {
|
|
case POST_RATE_CHANGE:
|
|
/* apply the changes */
|
|
pllcmd = readl(pll->base + PLLCMD);
|
|
pllcmd |= PLLCMD_GOSET;
|
|
writel(pllcmd, pll->base + PLLCMD);
|
|
/* fallthrough */
|
|
case PRE_RATE_CHANGE:
|
|
/* Wait until for outstanding changes to take effect */
|
|
do {
|
|
pllstat = readl(pll->base + PLLSTAT);
|
|
} while (pllstat & PLLSTAT_GOSTAT);
|
|
break;
|
|
}
|
|
|
|
return NOTIFY_OK;
|
|
}
|
|
|
|
static struct notifier_block davinci_pll_sysclk_notifier = {
|
|
.notifier_call = davinci_pll_sysclk_rate_change,
|
|
};
|
|
|
|
/**
|
|
* davinci_pll_sysclk_register - Register divider clocks (SYSCLKn)
|
|
* @dev: The PLL platform device or NULL
|
|
* @info: The clock info
|
|
* @base: The PLL memory region
|
|
*/
|
|
struct clk *
|
|
davinci_pll_sysclk_register(struct device *dev,
|
|
const struct davinci_pll_sysclk_info *info,
|
|
void __iomem *base)
|
|
{
|
|
const struct clk_ops *divider_ops = &clk_divider_ops;
|
|
struct clk_gate *gate;
|
|
struct clk_divider *divider;
|
|
struct clk *clk;
|
|
u32 reg;
|
|
u32 flags = 0;
|
|
int ret;
|
|
|
|
/* PLLDIVn registers are not entirely consecutive */
|
|
if (info->id < 4)
|
|
reg = PLLDIV1 + 4 * (info->id - 1);
|
|
else
|
|
reg = PLLDIV4 + 4 * (info->id - 4);
|
|
|
|
gate = kzalloc(sizeof(*gate), GFP_KERNEL);
|
|
if (!gate)
|
|
return ERR_PTR(-ENOMEM);
|
|
|
|
gate->reg = base + reg;
|
|
gate->bit_idx = DIV_ENABLE_SHIFT;
|
|
|
|
divider = kzalloc(sizeof(*divider), GFP_KERNEL);
|
|
if (!divider) {
|
|
ret = -ENOMEM;
|
|
goto err_free_gate;
|
|
}
|
|
|
|
divider->reg = base + reg;
|
|
divider->shift = DIV_RATIO_SHIFT;
|
|
divider->width = info->ratio_width;
|
|
divider->flags = 0;
|
|
|
|
if (info->flags & SYSCLK_FIXED_DIV) {
|
|
divider->flags |= CLK_DIVIDER_READ_ONLY;
|
|
divider_ops = &clk_divider_ro_ops;
|
|
}
|
|
|
|
/* Only the ARM clock can change the parent PLL rate */
|
|
if (info->flags & SYSCLK_ARM_RATE)
|
|
flags |= CLK_SET_RATE_PARENT;
|
|
|
|
if (info->flags & SYSCLK_ALWAYS_ENABLED)
|
|
flags |= CLK_IS_CRITICAL;
|
|
|
|
clk = clk_register_composite(dev, info->name, &info->parent_name, 1,
|
|
NULL, NULL, ÷r->hw, divider_ops,
|
|
&gate->hw, &clk_gate_ops, flags);
|
|
if (IS_ERR(clk)) {
|
|
ret = PTR_ERR(clk);
|
|
goto err_free_divider;
|
|
}
|
|
|
|
clk_notifier_register(clk, &davinci_pll_sysclk_notifier);
|
|
|
|
return clk;
|
|
|
|
err_free_divider:
|
|
kfree(divider);
|
|
err_free_gate:
|
|
kfree(gate);
|
|
|
|
return ERR_PTR(ret);
|
|
}
|
|
|
|
int of_davinci_pll_init(struct device *dev, struct device_node *node,
|
|
const struct davinci_pll_clk_info *info,
|
|
const struct davinci_pll_obsclk_info *obsclk_info,
|
|
const struct davinci_pll_sysclk_info **div_info,
|
|
u8 max_sysclk_id,
|
|
void __iomem *base,
|
|
struct regmap *cfgchip)
|
|
{
|
|
struct device_node *child;
|
|
const char *parent_name;
|
|
struct clk *clk;
|
|
|
|
if (info->flags & PLL_HAS_CLKMODE)
|
|
parent_name = of_clk_get_parent_name(node, 0);
|
|
else
|
|
parent_name = OSCIN_CLK_NAME;
|
|
|
|
clk = davinci_pll_clk_register(dev, info, parent_name, base, cfgchip);
|
|
if (IS_ERR(clk)) {
|
|
dev_err(dev, "failed to register %s\n", info->name);
|
|
return PTR_ERR(clk);
|
|
}
|
|
|
|
child = of_get_child_by_name(node, "pllout");
|
|
if (of_device_is_available(child))
|
|
of_clk_add_provider(child, of_clk_src_simple_get, clk);
|
|
of_node_put(child);
|
|
|
|
child = of_get_child_by_name(node, "sysclk");
|
|
if (of_device_is_available(child)) {
|
|
struct clk_onecell_data *clk_data;
|
|
struct clk **clks;
|
|
int n_clks = max_sysclk_id + 1;
|
|
int i;
|
|
|
|
clk_data = kzalloc(sizeof(*clk_data), GFP_KERNEL);
|
|
if (!clk_data)
|
|
return -ENOMEM;
|
|
|
|
clks = kmalloc_array(n_clks, sizeof(*clks), GFP_KERNEL);
|
|
if (!clks) {
|
|
kfree(clk_data);
|
|
return -ENOMEM;
|
|
}
|
|
|
|
clk_data->clks = clks;
|
|
clk_data->clk_num = n_clks;
|
|
|
|
for (i = 0; i < n_clks; i++)
|
|
clks[i] = ERR_PTR(-ENOENT);
|
|
|
|
for (; *div_info; div_info++) {
|
|
clk = davinci_pll_sysclk_register(dev, *div_info, base);
|
|
if (IS_ERR(clk))
|
|
dev_warn(dev, "failed to register %s (%ld)\n",
|
|
(*div_info)->name, PTR_ERR(clk));
|
|
else
|
|
clks[(*div_info)->id] = clk;
|
|
}
|
|
of_clk_add_provider(child, of_clk_src_onecell_get, clk_data);
|
|
}
|
|
of_node_put(child);
|
|
|
|
child = of_get_child_by_name(node, "auxclk");
|
|
if (of_device_is_available(child)) {
|
|
char child_name[MAX_NAME_SIZE];
|
|
|
|
snprintf(child_name, MAX_NAME_SIZE, "%s_auxclk", info->name);
|
|
|
|
clk = davinci_pll_auxclk_register(dev, child_name, base);
|
|
if (IS_ERR(clk))
|
|
dev_warn(dev, "failed to register %s (%ld)\n",
|
|
child_name, PTR_ERR(clk));
|
|
else
|
|
of_clk_add_provider(child, of_clk_src_simple_get, clk);
|
|
}
|
|
of_node_put(child);
|
|
|
|
child = of_get_child_by_name(node, "obsclk");
|
|
if (of_device_is_available(child)) {
|
|
if (obsclk_info)
|
|
clk = davinci_pll_obsclk_register(dev, obsclk_info, base);
|
|
else
|
|
clk = ERR_PTR(-EINVAL);
|
|
|
|
if (IS_ERR(clk))
|
|
dev_warn(dev, "failed to register obsclk (%ld)\n",
|
|
PTR_ERR(clk));
|
|
else
|
|
of_clk_add_provider(child, of_clk_src_simple_get, clk);
|
|
}
|
|
of_node_put(child);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static struct davinci_pll_platform_data *davinci_pll_get_pdata(struct device *dev)
|
|
{
|
|
struct davinci_pll_platform_data *pdata = dev_get_platdata(dev);
|
|
|
|
/*
|
|
* Platform data is optional, so allocate a new struct if one was not
|
|
* provided. For device tree, this will always be the case.
|
|
*/
|
|
if (!pdata)
|
|
pdata = devm_kzalloc(dev, sizeof(*pdata), GFP_KERNEL);
|
|
if (!pdata)
|
|
return NULL;
|
|
|
|
/* for device tree, we need to fill in the struct */
|
|
if (dev->of_node)
|
|
pdata->cfgchip =
|
|
syscon_regmap_lookup_by_compatible("ti,da830-cfgchip");
|
|
|
|
return pdata;
|
|
}
|
|
|
|
/* needed in early boot for clocksource/clockevent */
|
|
#ifdef CONFIG_ARCH_DAVINCI_DA850
|
|
CLK_OF_DECLARE(da850_pll0, "ti,da850-pll0", of_da850_pll0_init);
|
|
#endif
|
|
|
|
static const struct of_device_id davinci_pll_of_match[] = {
|
|
#ifdef CONFIG_ARCH_DAVINCI_DA850
|
|
{ .compatible = "ti,da850-pll1", .data = of_da850_pll1_init },
|
|
#endif
|
|
{ }
|
|
};
|
|
|
|
static const struct platform_device_id davinci_pll_id_table[] = {
|
|
#ifdef CONFIG_ARCH_DAVINCI_DA830
|
|
{ .name = "da830-pll", .driver_data = (kernel_ulong_t)da830_pll_init },
|
|
#endif
|
|
#ifdef CONFIG_ARCH_DAVINCI_DA850
|
|
{ .name = "da850-pll0", .driver_data = (kernel_ulong_t)da850_pll0_init },
|
|
{ .name = "da850-pll1", .driver_data = (kernel_ulong_t)da850_pll1_init },
|
|
#endif
|
|
#ifdef CONFIG_ARCH_DAVINCI_DM355
|
|
{ .name = "dm355-pll1", .driver_data = (kernel_ulong_t)dm355_pll1_init },
|
|
{ .name = "dm355-pll2", .driver_data = (kernel_ulong_t)dm355_pll2_init },
|
|
#endif
|
|
#ifdef CONFIG_ARCH_DAVINCI_DM365
|
|
{ .name = "dm365-pll1", .driver_data = (kernel_ulong_t)dm365_pll1_init },
|
|
{ .name = "dm365-pll2", .driver_data = (kernel_ulong_t)dm365_pll2_init },
|
|
#endif
|
|
#ifdef CONFIG_ARCH_DAVINCI_DM644x
|
|
{ .name = "dm644x-pll1", .driver_data = (kernel_ulong_t)dm644x_pll1_init },
|
|
{ .name = "dm644x-pll2", .driver_data = (kernel_ulong_t)dm644x_pll2_init },
|
|
#endif
|
|
#ifdef CONFIG_ARCH_DAVINCI_DM646x
|
|
{ .name = "dm646x-pll1", .driver_data = (kernel_ulong_t)dm646x_pll1_init },
|
|
{ .name = "dm646x-pll2", .driver_data = (kernel_ulong_t)dm646x_pll2_init },
|
|
#endif
|
|
{ }
|
|
};
|
|
|
|
typedef int (*davinci_pll_init)(struct device *dev, void __iomem *base,
|
|
struct regmap *cfgchip);
|
|
|
|
static int davinci_pll_probe(struct platform_device *pdev)
|
|
{
|
|
struct device *dev = &pdev->dev;
|
|
struct davinci_pll_platform_data *pdata;
|
|
const struct of_device_id *of_id;
|
|
davinci_pll_init pll_init = NULL;
|
|
struct resource *res;
|
|
void __iomem *base;
|
|
|
|
of_id = of_match_device(davinci_pll_of_match, dev);
|
|
if (of_id)
|
|
pll_init = of_id->data;
|
|
else if (pdev->id_entry)
|
|
pll_init = (void *)pdev->id_entry->driver_data;
|
|
|
|
if (!pll_init) {
|
|
dev_err(dev, "unable to find driver data\n");
|
|
return -EINVAL;
|
|
}
|
|
|
|
pdata = davinci_pll_get_pdata(dev);
|
|
if (!pdata) {
|
|
dev_err(dev, "missing platform data\n");
|
|
return -EINVAL;
|
|
}
|
|
|
|
res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
|
|
base = devm_ioremap_resource(dev, res);
|
|
if (IS_ERR(base))
|
|
return PTR_ERR(base);
|
|
|
|
return pll_init(dev, base, pdata->cfgchip);
|
|
}
|
|
|
|
static struct platform_driver davinci_pll_driver = {
|
|
.probe = davinci_pll_probe,
|
|
.driver = {
|
|
.name = "davinci-pll-clk",
|
|
.of_match_table = davinci_pll_of_match,
|
|
},
|
|
.id_table = davinci_pll_id_table,
|
|
};
|
|
|
|
static int __init davinci_pll_driver_init(void)
|
|
{
|
|
return platform_driver_register(&davinci_pll_driver);
|
|
}
|
|
|
|
/* has to be postcore_initcall because PSC devices depend on PLL parent clocks */
|
|
postcore_initcall(davinci_pll_driver_init);
|
|
|
|
#ifdef CONFIG_DEBUG_FS
|
|
#include <linux/debugfs.h>
|
|
|
|
#define DEBUG_REG(n) \
|
|
{ \
|
|
.name = #n, \
|
|
.offset = n, \
|
|
}
|
|
|
|
static const struct debugfs_reg32 davinci_pll_regs[] = {
|
|
DEBUG_REG(REVID),
|
|
DEBUG_REG(PLLCTL),
|
|
DEBUG_REG(OCSEL),
|
|
DEBUG_REG(PLLSECCTL),
|
|
DEBUG_REG(PLLM),
|
|
DEBUG_REG(PREDIV),
|
|
DEBUG_REG(PLLDIV1),
|
|
DEBUG_REG(PLLDIV2),
|
|
DEBUG_REG(PLLDIV3),
|
|
DEBUG_REG(OSCDIV),
|
|
DEBUG_REG(POSTDIV),
|
|
DEBUG_REG(BPDIV),
|
|
DEBUG_REG(PLLCMD),
|
|
DEBUG_REG(PLLSTAT),
|
|
DEBUG_REG(ALNCTL),
|
|
DEBUG_REG(DCHANGE),
|
|
DEBUG_REG(CKEN),
|
|
DEBUG_REG(CKSTAT),
|
|
DEBUG_REG(SYSTAT),
|
|
DEBUG_REG(PLLDIV4),
|
|
DEBUG_REG(PLLDIV5),
|
|
DEBUG_REG(PLLDIV6),
|
|
DEBUG_REG(PLLDIV7),
|
|
DEBUG_REG(PLLDIV8),
|
|
DEBUG_REG(PLLDIV9),
|
|
};
|
|
|
|
static void davinci_pll_debug_init(struct clk_hw *hw, struct dentry *dentry)
|
|
{
|
|
struct davinci_pll_clk *pll = to_davinci_pll_clk(hw);
|
|
struct debugfs_regset32 *regset;
|
|
|
|
regset = kzalloc(sizeof(*regset), GFP_KERNEL);
|
|
if (!regset)
|
|
return;
|
|
|
|
regset->regs = davinci_pll_regs;
|
|
regset->nregs = ARRAY_SIZE(davinci_pll_regs);
|
|
regset->base = pll->base;
|
|
|
|
debugfs_create_regset32("registers", 0400, dentry, regset);
|
|
}
|
|
#endif
|