553 lines
12 KiB
Plaintext
553 lines
12 KiB
Plaintext
// SPDX-License-Identifier: GPL-2.0
|
|
/*
|
|
* Insignal's Exynos4412 based Origen board device tree source
|
|
*
|
|
* Copyright (c) 2012-2013 Samsung Electronics Co., Ltd.
|
|
* http://www.samsung.com
|
|
*
|
|
* Device tree source file for Insignal's Origen board which is based on
|
|
* Samsung's Exynos4412 SoC.
|
|
*/
|
|
|
|
/dts-v1/;
|
|
#include "exynos4412.dtsi"
|
|
#include <dt-bindings/clock/samsung,s2mps11.h>
|
|
#include <dt-bindings/gpio/gpio.h>
|
|
#include <dt-bindings/input/input.h>
|
|
#include "exynos-mfc-reserved-memory.dtsi"
|
|
|
|
/ {
|
|
model = "Insignal Origen evaluation board based on Exynos4412";
|
|
compatible = "insignal,origen4412", "samsung,exynos4412", "samsung,exynos4";
|
|
|
|
memory@40000000 {
|
|
device_type = "memory";
|
|
reg = <0x40000000 0x40000000>;
|
|
};
|
|
|
|
chosen {
|
|
stdout-path = "serial2:115200n8";
|
|
};
|
|
|
|
firmware@203f000 {
|
|
compatible = "samsung,secure-firmware";
|
|
reg = <0x0203F000 0x1000>;
|
|
};
|
|
|
|
mmc_reg: regulator-0 {
|
|
compatible = "regulator-fixed";
|
|
regulator-name = "VMEM_VDD_2.8V";
|
|
regulator-min-microvolt = <2800000>;
|
|
regulator-max-microvolt = <2800000>;
|
|
gpio = <&gpx1 1 GPIO_ACTIVE_HIGH>;
|
|
enable-active-high;
|
|
};
|
|
|
|
display-timings {
|
|
native-mode = <&timing0>;
|
|
timing0: timing {
|
|
clock-frequency = <47500000>;
|
|
hactive = <1024>;
|
|
vactive = <600>;
|
|
hfront-porch = <64>;
|
|
hback-porch = <16>;
|
|
hsync-len = <48>;
|
|
vback-porch = <64>;
|
|
vfront-porch = <16>;
|
|
vsync-len = <3>;
|
|
};
|
|
};
|
|
|
|
fixed-rate-clocks {
|
|
xxti {
|
|
compatible = "samsung,clock-xxti";
|
|
clock-frequency = <0>;
|
|
};
|
|
|
|
xusbxti {
|
|
compatible = "samsung,clock-xusbxti";
|
|
clock-frequency = <24000000>;
|
|
};
|
|
};
|
|
};
|
|
|
|
&cpu0 {
|
|
cpu0-supply = <&buck2_reg>;
|
|
};
|
|
|
|
&cpu_thermal {
|
|
cooling-maps {
|
|
cooling_map0: map0 {
|
|
/* Corresponds to 800MHz at freq_table */
|
|
cooling-device = <&cpu0 7 7>, <&cpu1 7 7>,
|
|
<&cpu2 7 7>, <&cpu3 7 7>;
|
|
};
|
|
cooling_map1: map1 {
|
|
/* Corresponds to 200MHz at freq_table */
|
|
cooling-device = <&cpu0 13 13>, <&cpu1 13 13>,
|
|
<&cpu2 13 13>, <&cpu3 13 13>;
|
|
};
|
|
};
|
|
};
|
|
|
|
&exynos_usbphy {
|
|
status = "okay";
|
|
};
|
|
|
|
&ehci {
|
|
samsung,vbus-gpio = <&gpx3 5 1>;
|
|
status = "okay";
|
|
phys = <&exynos_usbphy 2>, <&exynos_usbphy 3>;
|
|
phy-names = "hsic0", "hsic1";
|
|
};
|
|
|
|
&fimd {
|
|
pinctrl-0 = <&lcd_clk &lcd_data24 &pwm1_out>;
|
|
pinctrl-names = "default";
|
|
status = "okay";
|
|
};
|
|
|
|
&i2c_0 {
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
samsung,i2c-sda-delay = <100>;
|
|
samsung,i2c-max-bus-freq = <20000>;
|
|
pinctrl-0 = <&i2c0_bus>;
|
|
pinctrl-names = "default";
|
|
status = "okay";
|
|
|
|
pmic@66 {
|
|
compatible = "samsung,s5m8767-pmic";
|
|
reg = <0x66>;
|
|
|
|
s5m8767,pmic-buck-default-dvs-idx = <3>;
|
|
|
|
s5m8767,pmic-buck-dvs-gpios = <&gpx2 3 GPIO_ACTIVE_HIGH>,
|
|
<&gpx2 4 GPIO_ACTIVE_HIGH>,
|
|
<&gpx2 5 GPIO_ACTIVE_HIGH>;
|
|
|
|
s5m8767,pmic-buck-ds-gpios = <&gpm3 5 GPIO_ACTIVE_HIGH>,
|
|
<&gpm3 6 GPIO_ACTIVE_HIGH>,
|
|
<&gpm3 7 GPIO_ACTIVE_HIGH>;
|
|
|
|
s5m8767,pmic-buck2-dvs-voltage = <1250000>, <1200000>,
|
|
<1200000>, <1200000>,
|
|
<1200000>, <1200000>,
|
|
<1200000>, <1200000>;
|
|
|
|
s5m8767,pmic-buck3-dvs-voltage = <1100000>, <1100000>,
|
|
<1100000>, <1100000>,
|
|
<1100000>, <1100000>,
|
|
<1100000>, <1100000>;
|
|
|
|
s5m8767,pmic-buck4-dvs-voltage = <1200000>, <1200000>,
|
|
<1200000>, <1200000>,
|
|
<1200000>, <1200000>,
|
|
<1200000>, <1200000>;
|
|
wakeup-source;
|
|
|
|
s5m8767_osc: clocks {
|
|
compatible = "samsung,s5m8767-clk";
|
|
#clock-cells = <1>;
|
|
clock-output-names = "s5m8767_ap", "s5m8767_cp",
|
|
"s5m8767_bt";
|
|
};
|
|
|
|
regulators {
|
|
ldo1_reg: LDO1 {
|
|
regulator-name = "VDD_ALIVE";
|
|
regulator-min-microvolt = <1100000>;
|
|
regulator-max-microvolt = <1100000>;
|
|
regulator-always-on;
|
|
regulator-boot-on;
|
|
op_mode = <1>; /* Normal Mode */
|
|
};
|
|
|
|
ldo2_reg: LDO2 {
|
|
regulator-name = "VDDQ_M12";
|
|
regulator-min-microvolt = <1200000>;
|
|
regulator-max-microvolt = <1200000>;
|
|
regulator-always-on;
|
|
op_mode = <1>; /* Normal Mode */
|
|
};
|
|
|
|
ldo3_reg: LDO3 {
|
|
regulator-name = "VDDIOAP_18";
|
|
regulator-min-microvolt = <1800000>;
|
|
regulator-max-microvolt = <1800000>;
|
|
regulator-always-on;
|
|
op_mode = <1>; /* Normal Mode */
|
|
};
|
|
|
|
ldo4_reg: LDO4 {
|
|
regulator-name = "VDDQ_PRE";
|
|
regulator-min-microvolt = <1800000>;
|
|
regulator-max-microvolt = <1800000>;
|
|
regulator-always-on;
|
|
op_mode = <1>; /* Normal Mode */
|
|
};
|
|
|
|
ldo5_reg: LDO5 {
|
|
regulator-name = "VDD18_2M";
|
|
regulator-min-microvolt = <1800000>;
|
|
regulator-max-microvolt = <1800000>;
|
|
regulator-always-on;
|
|
op_mode = <1>; /* Normal Mode */
|
|
};
|
|
|
|
ldo6_reg: LDO6 {
|
|
regulator-name = "VDD10_MPLL";
|
|
regulator-min-microvolt = <1000000>;
|
|
regulator-max-microvolt = <1000000>;
|
|
regulator-always-on;
|
|
op_mode = <1>; /* Normal Mode */
|
|
};
|
|
|
|
ldo7_reg: LDO7 {
|
|
regulator-name = "VDD10_XPLL";
|
|
regulator-min-microvolt = <1000000>;
|
|
regulator-max-microvolt = <1000000>;
|
|
regulator-always-on;
|
|
op_mode = <1>; /* Normal Mode */
|
|
};
|
|
|
|
ldo8_reg: LDO8 {
|
|
regulator-name = "VDD10_MIPI";
|
|
regulator-min-microvolt = <1000000>;
|
|
regulator-max-microvolt = <1000000>;
|
|
regulator-always-on;
|
|
op_mode = <1>; /* Normal Mode */
|
|
};
|
|
|
|
ldo9_reg: LDO9 {
|
|
regulator-name = "VDD33_LCD";
|
|
regulator-min-microvolt = <3300000>;
|
|
regulator-max-microvolt = <3300000>;
|
|
regulator-always-on;
|
|
op_mode = <1>; /* Normal Mode */
|
|
};
|
|
|
|
ldo10_reg: LDO10 {
|
|
regulator-name = "VDD18_MIPI";
|
|
regulator-min-microvolt = <1800000>;
|
|
regulator-max-microvolt = <1800000>;
|
|
regulator-always-on;
|
|
op_mode = <1>; /* Normal Mode */
|
|
};
|
|
|
|
ldo11_reg: LDO11 {
|
|
regulator-name = "VDD18_ABB1";
|
|
regulator-min-microvolt = <1800000>;
|
|
regulator-max-microvolt = <1800000>;
|
|
regulator-always-on;
|
|
op_mode = <1>; /* Normal Mode */
|
|
};
|
|
|
|
ldo12_reg: LDO12 {
|
|
regulator-name = "VDD33_UOTG";
|
|
regulator-min-microvolt = <3300000>;
|
|
regulator-max-microvolt = <3300000>;
|
|
regulator-always-on;
|
|
op_mode = <1>; /* Normal Mode */
|
|
};
|
|
|
|
ldo13_reg: LDO13 {
|
|
regulator-name = "VDDIOPERI_18";
|
|
regulator-min-microvolt = <1800000>;
|
|
regulator-max-microvolt = <1800000>;
|
|
regulator-always-on;
|
|
op_mode = <1>; /* Normal Mode */
|
|
};
|
|
|
|
ldo14_reg: LDO14 {
|
|
regulator-name = "VDD18_ABB02";
|
|
regulator-min-microvolt = <1800000>;
|
|
regulator-max-microvolt = <1800000>;
|
|
regulator-always-on;
|
|
op_mode = <1>; /* Normal Mode */
|
|
};
|
|
|
|
ldo15_reg: LDO15 {
|
|
regulator-name = "VDD10_USH";
|
|
regulator-min-microvolt = <1000000>;
|
|
regulator-max-microvolt = <1000000>;
|
|
regulator-always-on;
|
|
op_mode = <1>; /* Normal Mode */
|
|
};
|
|
|
|
ldo16_reg: LDO16 {
|
|
regulator-name = "VDD18_HSIC";
|
|
regulator-min-microvolt = <1800000>;
|
|
regulator-max-microvolt = <1800000>;
|
|
regulator-always-on;
|
|
op_mode = <1>; /* Normal Mode */
|
|
};
|
|
|
|
ldo17_reg: LDO17 {
|
|
regulator-name = "VDDIOAP_MMC012_28";
|
|
regulator-min-microvolt = <2800000>;
|
|
regulator-max-microvolt = <2800000>;
|
|
regulator-always-on;
|
|
op_mode = <1>; /* Normal Mode */
|
|
};
|
|
|
|
ldo18_reg: LDO18 {
|
|
regulator-name = "VDDIOPERI_28";
|
|
regulator-min-microvolt = <2800000>;
|
|
regulator-max-microvolt = <2800000>;
|
|
regulator-always-on;
|
|
op_mode = <1>; /* Normal Mode */
|
|
};
|
|
|
|
ldo19_reg: LDO19 {
|
|
regulator-name = "DVDD25";
|
|
regulator-min-microvolt = <2500000>;
|
|
regulator-max-microvolt = <2500000>;
|
|
regulator-always-on;
|
|
op_mode = <1>; /* Normal Mode */
|
|
};
|
|
|
|
ldo20_reg: LDO20 {
|
|
regulator-name = "VDD28_CAM";
|
|
regulator-min-microvolt = <2800000>;
|
|
regulator-max-microvolt = <2800000>;
|
|
regulator-always-on;
|
|
op_mode = <1>; /* Normal Mode */
|
|
};
|
|
|
|
ldo21_reg: LDO21 {
|
|
regulator-name = "VDD28_AF";
|
|
regulator-min-microvolt = <2800000>;
|
|
regulator-max-microvolt = <2800000>;
|
|
regulator-always-on;
|
|
op_mode = <1>; /* Normal Mode */
|
|
};
|
|
|
|
ldo22_reg: LDO22 {
|
|
regulator-name = "VDDA28_2M";
|
|
regulator-min-microvolt = <2800000>;
|
|
regulator-max-microvolt = <2800000>;
|
|
regulator-always-on;
|
|
op_mode = <1>; /* Normal Mode */
|
|
};
|
|
|
|
ldo23_reg: LDO23 {
|
|
regulator-name = "VDD28_TF";
|
|
regulator-min-microvolt = <2800000>;
|
|
regulator-max-microvolt = <2800000>;
|
|
regulator-always-on;
|
|
op_mode = <1>; /* Normal Mode */
|
|
};
|
|
|
|
ldo24_reg: LDO24 {
|
|
regulator-name = "VDD33_A31";
|
|
regulator-min-microvolt = <3300000>;
|
|
regulator-max-microvolt = <3300000>;
|
|
regulator-always-on;
|
|
op_mode = <1>; /* Normal Mode */
|
|
};
|
|
|
|
ldo25_reg: LDO25 {
|
|
regulator-name = "VDD18_CAM";
|
|
regulator-min-microvolt = <1800000>;
|
|
regulator-max-microvolt = <1800000>;
|
|
regulator-always-on;
|
|
op_mode = <1>; /* Normal Mode */
|
|
};
|
|
|
|
ldo26_reg: LDO26 {
|
|
regulator-name = "VDD18_A31";
|
|
regulator-min-microvolt = <1800000>;
|
|
regulator-max-microvolt = <1800000>;
|
|
regulator-always-on;
|
|
op_mode = <1>; /* Normal Mode */
|
|
};
|
|
|
|
ldo27_reg: LDO27 {
|
|
regulator-name = "GPS_1V8";
|
|
regulator-min-microvolt = <1800000>;
|
|
regulator-max-microvolt = <1800000>;
|
|
regulator-always-on;
|
|
op_mode = <1>; /* Normal Mode */
|
|
};
|
|
|
|
ldo28_reg: LDO28 {
|
|
regulator-name = "DVDD12";
|
|
regulator-min-microvolt = <1200000>;
|
|
regulator-max-microvolt = <1200000>;
|
|
regulator-always-on;
|
|
op_mode = <1>; /* Normal Mode */
|
|
};
|
|
|
|
buck1_reg: BUCK1 {
|
|
regulator-name = "VDD_MIF";
|
|
regulator-min-microvolt = <950000>;
|
|
regulator-max-microvolt = <1100000>;
|
|
regulator-always-on;
|
|
regulator-boot-on;
|
|
op_mode = <1>; /* Normal Mode */
|
|
};
|
|
|
|
buck2_reg: BUCK2 {
|
|
regulator-name = "VDD_ARM";
|
|
regulator-min-microvolt = <900000>;
|
|
regulator-max-microvolt = <1350000>;
|
|
regulator-always-on;
|
|
regulator-boot-on;
|
|
op_mode = <1>; /* Normal Mode */
|
|
};
|
|
|
|
buck3_reg: BUCK3 {
|
|
regulator-name = "VDD_INT";
|
|
regulator-min-microvolt = <900000>;
|
|
regulator-max-microvolt = <1200000>;
|
|
regulator-always-on;
|
|
regulator-boot-on;
|
|
op_mode = <1>; /* Normal Mode */
|
|
};
|
|
|
|
buck4_reg: BUCK4 {
|
|
regulator-name = "VDD_G3D";
|
|
regulator-min-microvolt = <750000>;
|
|
regulator-max-microvolt = <1500000>;
|
|
regulator-always-on;
|
|
regulator-boot-on;
|
|
op_mode = <1>; /* Normal Mode */
|
|
};
|
|
|
|
buck5_reg: BUCK5 {
|
|
regulator-name = "VDD_M12";
|
|
regulator-min-microvolt = <750000>;
|
|
regulator-max-microvolt = <1500000>;
|
|
regulator-always-on;
|
|
regulator-boot-on;
|
|
op_mode = <1>; /* Normal Mode */
|
|
};
|
|
|
|
buck6_reg: BUCK6 {
|
|
regulator-name = "VDD12_5M";
|
|
regulator-min-microvolt = <750000>;
|
|
regulator-max-microvolt = <1500000>;
|
|
regulator-always-on;
|
|
regulator-boot-on;
|
|
op_mode = <1>; /* Normal Mode */
|
|
};
|
|
|
|
buck9_reg: BUCK9 {
|
|
regulator-name = "VDDF28_EMMC";
|
|
regulator-min-microvolt = <750000>;
|
|
regulator-max-microvolt = <3000000>;
|
|
regulator-always-on;
|
|
regulator-boot-on;
|
|
op_mode = <1>; /* Normal Mode */
|
|
};
|
|
};
|
|
};
|
|
};
|
|
|
|
&keypad {
|
|
samsung,keypad-num-rows = <3>;
|
|
samsung,keypad-num-columns = <2>;
|
|
linux,keypad-no-autorepeat;
|
|
wakeup-source;
|
|
pinctrl-0 = <&keypad_rows &keypad_cols>;
|
|
pinctrl-names = "default";
|
|
status = "okay";
|
|
|
|
key-home {
|
|
keypad,row = <0>;
|
|
keypad,column = <0>;
|
|
linux,code = <KEY_HOME>;
|
|
};
|
|
|
|
key-down {
|
|
keypad,row = <0>;
|
|
keypad,column = <1>;
|
|
linux,code = <KEY_DOWN>;
|
|
};
|
|
|
|
key-up {
|
|
keypad,row = <1>;
|
|
keypad,column = <0>;
|
|
linux,code = <KEY_UP>;
|
|
};
|
|
|
|
key-menu {
|
|
keypad,row = <1>;
|
|
keypad,column = <1>;
|
|
linux,code = <KEY_MENU>;
|
|
};
|
|
|
|
key-back {
|
|
keypad,row = <2>;
|
|
keypad,column = <0>;
|
|
linux,code = <KEY_BACK>;
|
|
};
|
|
|
|
key-enter {
|
|
keypad,row = <2>;
|
|
keypad,column = <1>;
|
|
linux,code = <KEY_ENTER>;
|
|
};
|
|
};
|
|
|
|
&mshc_0 {
|
|
pinctrl-0 = <&sd4_clk &sd4_cmd &sd4_bus4 &sd4_bus8>;
|
|
pinctrl-names = "default";
|
|
status = "okay";
|
|
|
|
broken-cd;
|
|
card-detect-delay = <200>;
|
|
samsung,dw-mshc-ciu-div = <3>;
|
|
samsung,dw-mshc-sdr-timing = <2 3>;
|
|
samsung,dw-mshc-ddr-timing = <1 2>;
|
|
bus-width = <8>;
|
|
cap-mmc-highspeed;
|
|
};
|
|
|
|
&pinctrl_1 {
|
|
keypad_rows: keypad-rows {
|
|
samsung,pins = "gpx2-0", "gpx2-1", "gpx2-2";
|
|
samsung,pin-function = <EXYNOS_PIN_FUNC_3>;
|
|
samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
|
|
samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
|
|
};
|
|
|
|
keypad_cols: keypad-cols {
|
|
samsung,pins = "gpx1-0", "gpx1-1";
|
|
samsung,pin-function = <EXYNOS_PIN_FUNC_3>;
|
|
samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
|
|
samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
|
|
};
|
|
};
|
|
|
|
&rtc {
|
|
status = "okay";
|
|
clocks = <&clock CLK_RTC>, <&s5m8767_osc S2MPS11_CLK_AP>;
|
|
clock-names = "rtc", "rtc_src";
|
|
};
|
|
|
|
&sdhci_2 {
|
|
bus-width = <4>;
|
|
pinctrl-0 = <&sd2_clk &sd2_cmd &sd2_bus4 &sd2_cd>;
|
|
pinctrl-names = "default";
|
|
vmmc-supply = <&mmc_reg>;
|
|
status = "okay";
|
|
};
|
|
|
|
&serial_0 {
|
|
status = "okay";
|
|
};
|
|
|
|
&serial_1 {
|
|
status = "okay";
|
|
};
|
|
|
|
&serial_2 {
|
|
status = "okay";
|
|
};
|
|
|
|
&serial_3 {
|
|
status = "okay";
|
|
};
|