OpenCloudOS-Kernel/drivers/ide/sgiioc4.c

632 lines
17 KiB
C

/*
* Copyright (c) 2003-2006 Silicon Graphics, Inc. All Rights Reserved.
* Copyright (C) 2008-2009 MontaVista Software, Inc.
*
* This program is free software; you can redistribute it and/or modify it
* under the terms of version 2 of the GNU General Public License
* as published by the Free Software Foundation.
*
* This program is distributed in the hope that it would be useful, but
* WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.
*
* You should have received a copy of the GNU General Public
* License along with this program; if not, write the Free Software
* Foundation, Inc., 59 Temple Place - Suite 330, Boston MA 02111-1307, USA.
*
* For further information regarding this notice, see:
*
* http://oss.sgi.com/projects/GenInfo/NoticeExplan
*/
#include <linux/module.h>
#include <linux/types.h>
#include <linux/pci.h>
#include <linux/delay.h>
#include <linux/init.h>
#include <linux/kernel.h>
#include <linux/ioport.h>
#include <linux/blkdev.h>
#include <linux/scatterlist.h>
#include <linux/ioc4.h>
#include <linux/io.h>
#include <linux/ide.h>
#define DRV_NAME "SGIIOC4"
/* IOC4 Specific Definitions */
#define IOC4_CMD_OFFSET 0x100
#define IOC4_CTRL_OFFSET 0x120
#define IOC4_DMA_OFFSET 0x140
#define IOC4_INTR_OFFSET 0x0
#define IOC4_TIMING 0x00
#define IOC4_DMA_PTR_L 0x01
#define IOC4_DMA_PTR_H 0x02
#define IOC4_DMA_ADDR_L 0x03
#define IOC4_DMA_ADDR_H 0x04
#define IOC4_BC_DEV 0x05
#define IOC4_BC_MEM 0x06
#define IOC4_DMA_CTRL 0x07
#define IOC4_DMA_END_ADDR 0x08
/* Bits in the IOC4 Control/Status Register */
#define IOC4_S_DMA_START 0x01
#define IOC4_S_DMA_STOP 0x02
#define IOC4_S_DMA_DIR 0x04
#define IOC4_S_DMA_ACTIVE 0x08
#define IOC4_S_DMA_ERROR 0x10
#define IOC4_ATA_MEMERR 0x02
/* Read/Write Directions */
#define IOC4_DMA_WRITE 0x04
#define IOC4_DMA_READ 0x00
/* Interrupt Register Offsets */
#define IOC4_INTR_REG 0x03
#define IOC4_INTR_SET 0x05
#define IOC4_INTR_CLEAR 0x07
#define IOC4_IDE_CACHELINE_SIZE 128
#define IOC4_CMD_CTL_BLK_SIZE 0x20
#define IOC4_SUPPORTED_FIRMWARE_REV 46
struct ioc4_dma_regs {
u32 timing_reg0;
u32 timing_reg1;
u32 low_mem_ptr;
u32 high_mem_ptr;
u32 low_mem_addr;
u32 high_mem_addr;
u32 dev_byte_count;
u32 mem_byte_count;
u32 status;
};
/* Each Physical Region Descriptor Entry size is 16 bytes (2 * 64 bits) */
/* IOC4 has only 1 IDE channel */
#define IOC4_PRD_BYTES 16
#define IOC4_PRD_ENTRIES (PAGE_SIZE / (4 * IOC4_PRD_BYTES))
static void sgiioc4_init_hwif_ports(struct ide_hw *hw,
unsigned long data_port,
unsigned long ctrl_port,
unsigned long irq_port)
{
unsigned long reg = data_port;
int i;
/* Registers are word (32 bit) aligned */
for (i = 0; i <= 7; i++)
hw->io_ports_array[i] = reg + i * 4;
hw->io_ports.ctl_addr = ctrl_port;
hw->io_ports.irq_addr = irq_port;
}
static int sgiioc4_checkirq(ide_hwif_t *hwif)
{
unsigned long intr_addr = hwif->io_ports.irq_addr + IOC4_INTR_REG * 4;
if (readl((void __iomem *)intr_addr) & 0x03)
return 1;
return 0;
}
static u8 sgiioc4_read_status(ide_hwif_t *);
static int sgiioc4_clearirq(ide_drive_t *drive)
{
u32 intr_reg;
ide_hwif_t *hwif = drive->hwif;
struct ide_io_ports *io_ports = &hwif->io_ports;
unsigned long other_ir = io_ports->irq_addr + (IOC4_INTR_REG << 2);
/* Code to check for PCI error conditions */
intr_reg = readl((void __iomem *)other_ir);
if (intr_reg & 0x03) { /* Valid IOC4-IDE interrupt */
/*
* Using sgiioc4_read_status to read the Status register has a
* side effect of clearing the interrupt. The first read should
* clear it if it is set. The second read should return
* a "clear" status if it got cleared. If not, then spin
* for a bit trying to clear it.
*/
u8 stat = sgiioc4_read_status(hwif);
int count = 0;
stat = sgiioc4_read_status(hwif);
while ((stat & ATA_BUSY) && (count++ < 100)) {
udelay(1);
stat = sgiioc4_read_status(hwif);
}
if (intr_reg & 0x02) {
struct pci_dev *dev = to_pci_dev(hwif->dev);
/* Error when transferring DMA data on PCI bus */
u32 pci_err_addr_low, pci_err_addr_high,
pci_stat_cmd_reg;
pci_err_addr_low =
readl((void __iomem *)io_ports->irq_addr);
pci_err_addr_high =
readl((void __iomem *)(io_ports->irq_addr + 4));
pci_read_config_dword(dev, PCI_COMMAND,
&pci_stat_cmd_reg);
printk(KERN_ERR "%s(%s): PCI Bus Error when doing DMA: "
"status-cmd reg is 0x%x\n",
__func__, drive->name, pci_stat_cmd_reg);
printk(KERN_ERR "%s(%s): PCI Error Address is 0x%x%x\n",
__func__, drive->name,
pci_err_addr_high, pci_err_addr_low);
/* Clear the PCI Error indicator */
pci_write_config_dword(dev, PCI_COMMAND, 0x00000146);
}
/* Clear the Interrupt, Error bits on the IOC4 */
writel(0x03, (void __iomem *)other_ir);
intr_reg = readl((void __iomem *)other_ir);
}
return intr_reg & 3;
}
static void sgiioc4_dma_start(ide_drive_t *drive)
{
ide_hwif_t *hwif = drive->hwif;
unsigned long ioc4_dma_addr = hwif->dma_base + IOC4_DMA_CTRL * 4;
unsigned int reg = readl((void __iomem *)ioc4_dma_addr);
unsigned int temp_reg = reg | IOC4_S_DMA_START;
writel(temp_reg, (void __iomem *)ioc4_dma_addr);
}
static u32 sgiioc4_ide_dma_stop(ide_hwif_t *hwif, u64 dma_base)
{
unsigned long ioc4_dma_addr = dma_base + IOC4_DMA_CTRL * 4;
u32 ioc4_dma;
int count;
count = 0;
ioc4_dma = readl((void __iomem *)ioc4_dma_addr);
while ((ioc4_dma & IOC4_S_DMA_STOP) && (count++ < 200)) {
udelay(1);
ioc4_dma = readl((void __iomem *)ioc4_dma_addr);
}
return ioc4_dma;
}
/* Stops the IOC4 DMA Engine */
static int sgiioc4_dma_end(ide_drive_t *drive)
{
u32 ioc4_dma, bc_dev, bc_mem, num, valid = 0, cnt = 0;
ide_hwif_t *hwif = drive->hwif;
unsigned long dma_base = hwif->dma_base;
int dma_stat = 0;
unsigned long *ending_dma = ide_get_hwifdata(hwif);
writel(IOC4_S_DMA_STOP, (void __iomem *)(dma_base + IOC4_DMA_CTRL * 4));
ioc4_dma = sgiioc4_ide_dma_stop(hwif, dma_base);
if (ioc4_dma & IOC4_S_DMA_STOP) {
printk(KERN_ERR
"%s(%s): IOC4 DMA STOP bit is still 1 :"
"ioc4_dma_reg 0x%x\n",
__func__, drive->name, ioc4_dma);
dma_stat = 1;
}
/*
* The IOC4 will DMA 1's to the ending DMA area to indicate that
* previous data DMA is complete. This is necessary because of relaxed
* ordering between register reads and DMA writes on the Altix.
*/
while ((cnt++ < 200) && (!valid)) {
for (num = 0; num < 16; num++) {
if (ending_dma[num]) {
valid = 1;
break;
}
}
udelay(1);
}
if (!valid) {
printk(KERN_ERR "%s(%s) : DMA incomplete\n", __func__,
drive->name);
dma_stat = 1;
}
bc_dev = readl((void __iomem *)(dma_base + IOC4_BC_DEV * 4));
bc_mem = readl((void __iomem *)(dma_base + IOC4_BC_MEM * 4));
if ((bc_dev & 0x01FF) || (bc_mem & 0x1FF)) {
if (bc_dev > bc_mem + 8) {
printk(KERN_ERR
"%s(%s): WARNING!! byte_count_dev %d "
"!= byte_count_mem %d\n",
__func__, drive->name, bc_dev, bc_mem);
}
}
return dma_stat;
}
static void sgiioc4_set_dma_mode(ide_drive_t *drive, const u8 speed)
{
}
/* Returns 1 if DMA IRQ issued, 0 otherwise */
static int sgiioc4_dma_test_irq(ide_drive_t *drive)
{
return sgiioc4_checkirq(drive->hwif);
}
static void sgiioc4_dma_host_set(ide_drive_t *drive, int on)
{
if (!on)
sgiioc4_clearirq(drive);
}
static void sgiioc4_resetproc(ide_drive_t *drive)
{
struct ide_cmd *cmd = &drive->hwif->cmd;
sgiioc4_dma_end(drive);
ide_dma_unmap_sg(drive, cmd);
sgiioc4_clearirq(drive);
}
static void sgiioc4_dma_lost_irq(ide_drive_t *drive)
{
sgiioc4_resetproc(drive);
ide_dma_lost_irq(drive);
}
static u8 sgiioc4_read_status(ide_hwif_t *hwif)
{
unsigned long port = hwif->io_ports.status_addr;
u8 reg = (u8) readb((void __iomem *) port);
if (!(reg & ATA_BUSY)) { /* Not busy... check for interrupt */
unsigned long other_ir = port - 0x110;
unsigned int intr_reg = (u32) readl((void __iomem *) other_ir);
/* Clear the Interrupt, Error bits on the IOC4 */
if (intr_reg & 0x03) {
writel(0x03, (void __iomem *) other_ir);
intr_reg = (u32) readl((void __iomem *) other_ir);
}
}
return reg;
}
/* Creates a DMA map for the scatter-gather list entries */
static int __devinit ide_dma_sgiioc4(ide_hwif_t *hwif,
const struct ide_port_info *d)
{
struct pci_dev *dev = to_pci_dev(hwif->dev);
unsigned long dma_base = pci_resource_start(dev, 0) + IOC4_DMA_OFFSET;
int num_ports = sizeof(struct ioc4_dma_regs);
void *pad;
printk(KERN_INFO " %s: MMIO-DMA\n", hwif->name);
if (request_mem_region(dma_base, num_ports, hwif->name) == NULL) {
printk(KERN_ERR "%s(%s) -- ERROR: addresses 0x%08lx to 0x%08lx "
"already in use\n", __func__, hwif->name,
dma_base, dma_base + num_ports - 1);
return -1;
}
hwif->dma_base = (unsigned long)hwif->io_ports.irq_addr +
IOC4_DMA_OFFSET;
hwif->sg_max_nents = IOC4_PRD_ENTRIES;
hwif->prd_max_nents = IOC4_PRD_ENTRIES;
hwif->prd_ent_size = IOC4_PRD_BYTES;
if (ide_allocate_dma_engine(hwif))
goto dma_pci_alloc_failure;
pad = pci_alloc_consistent(dev, IOC4_IDE_CACHELINE_SIZE,
(dma_addr_t *)&hwif->extra_base);
if (pad) {
ide_set_hwifdata(hwif, pad);
return 0;
}
ide_release_dma_engine(hwif);
printk(KERN_ERR "%s(%s) -- ERROR: Unable to allocate DMA maps\n",
__func__, hwif->name);
printk(KERN_INFO "%s: changing from DMA to PIO mode", hwif->name);
dma_pci_alloc_failure:
release_mem_region(dma_base, num_ports);
return -1;
}
/* Initializes the IOC4 DMA Engine */
static void sgiioc4_configure_for_dma(int dma_direction, ide_drive_t *drive)
{
u32 ioc4_dma;
ide_hwif_t *hwif = drive->hwif;
unsigned long dma_base = hwif->dma_base;
unsigned long ioc4_dma_addr = dma_base + IOC4_DMA_CTRL * 4;
u32 dma_addr, ending_dma_addr;
ioc4_dma = readl((void __iomem *)ioc4_dma_addr);
if (ioc4_dma & IOC4_S_DMA_ACTIVE) {
printk(KERN_WARNING "%s(%s): Warning!! DMA from previous "
"transfer was still active\n", __func__, drive->name);
writel(IOC4_S_DMA_STOP, (void __iomem *)ioc4_dma_addr);
ioc4_dma = sgiioc4_ide_dma_stop(hwif, dma_base);
if (ioc4_dma & IOC4_S_DMA_STOP)
printk(KERN_ERR "%s(%s): IOC4 DMA STOP bit is "
"still 1\n", __func__, drive->name);
}
ioc4_dma = readl((void __iomem *)ioc4_dma_addr);
if (ioc4_dma & IOC4_S_DMA_ERROR) {
printk(KERN_WARNING "%s(%s): Warning!! DMA Error during "
"previous transfer, status 0x%x\n",
__func__, drive->name, ioc4_dma);
writel(IOC4_S_DMA_STOP, (void __iomem *)ioc4_dma_addr);
ioc4_dma = sgiioc4_ide_dma_stop(hwif, dma_base);
if (ioc4_dma & IOC4_S_DMA_STOP)
printk(KERN_ERR "%s(%s): IOC4 DMA STOP bit is "
"still 1\n", __func__, drive->name);
}
/* Address of the Scatter Gather List */
dma_addr = cpu_to_le32(hwif->dmatable_dma);
writel(dma_addr, (void __iomem *)(dma_base + IOC4_DMA_PTR_L * 4));
/* Address of the Ending DMA */
memset(ide_get_hwifdata(hwif), 0, IOC4_IDE_CACHELINE_SIZE);
ending_dma_addr = cpu_to_le32(hwif->extra_base);
writel(ending_dma_addr, (void __iomem *)(dma_base +
IOC4_DMA_END_ADDR * 4));
writel(dma_direction, (void __iomem *)ioc4_dma_addr);
}
/* IOC4 Scatter Gather list Format */
/* 128 Bit entries to support 64 bit addresses in the future */
/* The Scatter Gather list Entry should be in the BIG-ENDIAN Format */
/* --------------------------------------------------------------------- */
/* | Upper 32 bits - Zero | Lower 32 bits- address | */
/* --------------------------------------------------------------------- */
/* | Upper 32 bits - Zero |EOL| 15 unused | 16 Bit Length| */
/* --------------------------------------------------------------------- */
/* Creates the scatter gather list, DMA Table */
static int sgiioc4_build_dmatable(ide_drive_t *drive, struct ide_cmd *cmd)
{
ide_hwif_t *hwif = drive->hwif;
unsigned int *table = hwif->dmatable_cpu;
unsigned int count = 0, i = cmd->sg_nents;
struct scatterlist *sg = hwif->sg_table;
while (i && sg_dma_len(sg)) {
dma_addr_t cur_addr;
int cur_len;
cur_addr = sg_dma_address(sg);
cur_len = sg_dma_len(sg);
while (cur_len) {
if (count++ >= IOC4_PRD_ENTRIES) {
printk(KERN_WARNING
"%s: DMA table too small\n",
drive->name);
return 0;
} else {
u32 bcount =
0x10000 - (cur_addr & 0xffff);
if (bcount > cur_len)
bcount = cur_len;
/*
* Put the address, length in
* the IOC4 dma-table format
*/
*table = 0x0;
table++;
*table = cpu_to_be32(cur_addr);
table++;
*table = 0x0;
table++;
*table = cpu_to_be32(bcount);
table++;
cur_addr += bcount;
cur_len -= bcount;
}
}
sg = sg_next(sg);
i--;
}
if (count) {
table--;
*table |= cpu_to_be32(0x80000000);
return count;
}
return 0; /* revert to PIO for this request */
}
static int sgiioc4_dma_setup(ide_drive_t *drive, struct ide_cmd *cmd)
{
int ddir;
u8 write = !!(cmd->tf_flags & IDE_TFLAG_WRITE);
if (sgiioc4_build_dmatable(drive, cmd) == 0)
/* try PIO instead of DMA */
return 1;
if (write)
/* Writes TO the IOC4 FROM Main Memory */
ddir = IOC4_DMA_READ;
else
/* Writes FROM the IOC4 TO Main Memory */
ddir = IOC4_DMA_WRITE;
sgiioc4_configure_for_dma(ddir, drive);
return 0;
}
static const struct ide_tp_ops sgiioc4_tp_ops = {
.exec_command = ide_exec_command,
.read_status = sgiioc4_read_status,
.read_altstatus = ide_read_altstatus,
.write_devctl = ide_write_devctl,
.dev_select = ide_dev_select,
.tf_load = ide_tf_load,
.tf_read = ide_tf_read,
.input_data = ide_input_data,
.output_data = ide_output_data,
};
static const struct ide_port_ops sgiioc4_port_ops = {
.set_dma_mode = sgiioc4_set_dma_mode,
/* reset DMA engine, clear IRQs */
.resetproc = sgiioc4_resetproc,
};
static const struct ide_dma_ops sgiioc4_dma_ops = {
.dma_host_set = sgiioc4_dma_host_set,
.dma_setup = sgiioc4_dma_setup,
.dma_start = sgiioc4_dma_start,
.dma_end = sgiioc4_dma_end,
.dma_test_irq = sgiioc4_dma_test_irq,
.dma_lost_irq = sgiioc4_dma_lost_irq,
};
static const struct ide_port_info sgiioc4_port_info __devinitconst = {
.name = DRV_NAME,
.chipset = ide_pci,
.init_dma = ide_dma_sgiioc4,
.tp_ops = &sgiioc4_tp_ops,
.port_ops = &sgiioc4_port_ops,
.dma_ops = &sgiioc4_dma_ops,
.host_flags = IDE_HFLAG_MMIO,
.irq_flags = IRQF_SHARED,
.mwdma_mask = ATA_MWDMA2_ONLY,
};
static int __devinit sgiioc4_ide_setup_pci_device(struct pci_dev *dev)
{
unsigned long cmd_base, irqport;
unsigned long bar0, cmd_phys_base, ctl;
void __iomem *virt_base;
struct ide_hw hw, *hws[] = { &hw };
int rc;
/* Get the CmdBlk and CtrlBlk base registers */
bar0 = pci_resource_start(dev, 0);
virt_base = pci_ioremap_bar(dev, 0);
if (virt_base == NULL) {
printk(KERN_ERR "%s: Unable to remap BAR 0 address: 0x%lx\n",
DRV_NAME, bar0);
return -ENOMEM;
}
cmd_base = (unsigned long)virt_base + IOC4_CMD_OFFSET;
ctl = (unsigned long)virt_base + IOC4_CTRL_OFFSET;
irqport = (unsigned long)virt_base + IOC4_INTR_OFFSET;
cmd_phys_base = bar0 + IOC4_CMD_OFFSET;
if (request_mem_region(cmd_phys_base, IOC4_CMD_CTL_BLK_SIZE,
DRV_NAME) == NULL) {
printk(KERN_ERR "%s %s -- ERROR: addresses 0x%08lx to 0x%08lx "
"already in use\n", DRV_NAME, pci_name(dev),
cmd_phys_base, cmd_phys_base + IOC4_CMD_CTL_BLK_SIZE);
rc = -EBUSY;
goto req_mem_rgn_err;
}
/* Initialize the IO registers */
memset(&hw, 0, sizeof(hw));
sgiioc4_init_hwif_ports(&hw, cmd_base, ctl, irqport);
hw.irq = dev->irq;
hw.dev = &dev->dev;
/* Initialize chipset IRQ registers */
writel(0x03, (void __iomem *)(irqport + IOC4_INTR_SET * 4));
rc = ide_host_add(&sgiioc4_port_info, hws, 1, NULL);
if (!rc)
return 0;
release_mem_region(cmd_phys_base, IOC4_CMD_CTL_BLK_SIZE);
req_mem_rgn_err:
iounmap(virt_base);
return rc;
}
static unsigned int __devinit pci_init_sgiioc4(struct pci_dev *dev)
{
int ret;
printk(KERN_INFO "%s: IDE controller at PCI slot %s, revision %d\n",
DRV_NAME, pci_name(dev), dev->revision);
if (dev->revision < IOC4_SUPPORTED_FIRMWARE_REV) {
printk(KERN_ERR "Skipping %s IDE controller in slot %s: "
"firmware is obsolete - please upgrade to "
"revision46 or higher\n",
DRV_NAME, pci_name(dev));
ret = -EAGAIN;
goto out;
}
ret = sgiioc4_ide_setup_pci_device(dev);
out:
return ret;
}
int __devinit ioc4_ide_attach_one(struct ioc4_driver_data *idd)
{
/*
* PCI-RT does not bring out IDE connection.
* Do not attach to this particular IOC4.
*/
if (idd->idd_variant == IOC4_VARIANT_PCI_RT)
return 0;
return pci_init_sgiioc4(idd->idd_pdev);
}
static struct ioc4_submodule __devinitdata ioc4_ide_submodule = {
.is_name = "IOC4_ide",
.is_owner = THIS_MODULE,
.is_probe = ioc4_ide_attach_one,
};
static int __init ioc4_ide_init(void)
{
return ioc4_register_submodule(&ioc4_ide_submodule);
}
late_initcall(ioc4_ide_init); /* Call only after IDE init is done */
MODULE_AUTHOR("Aniket Malatpure/Jeremy Higdon");
MODULE_DESCRIPTION("IDE PCI driver module for SGI IOC4 Base-IO Card");
MODULE_LICENSE("GPL");