1047 lines
24 KiB
C
1047 lines
24 KiB
C
// SPDX-License-Identifier: GPL-2.0-only
|
|
/* CAN driver for Geschwister Schneider USB/CAN devices
|
|
* and bytewerk.org candleLight USB CAN interfaces.
|
|
*
|
|
* Copyright (C) 2013-2016 Geschwister Schneider Technologie-,
|
|
* Entwicklungs- und Vertriebs UG (Haftungsbeschränkt).
|
|
* Copyright (C) 2016 Hubert Denkmair
|
|
*
|
|
* Many thanks to all socketcan devs!
|
|
*/
|
|
|
|
#include <linux/init.h>
|
|
#include <linux/signal.h>
|
|
#include <linux/module.h>
|
|
#include <linux/netdevice.h>
|
|
#include <linux/usb.h>
|
|
|
|
#include <linux/can.h>
|
|
#include <linux/can/dev.h>
|
|
#include <linux/can/error.h>
|
|
|
|
/* Device specific constants */
|
|
#define USB_GSUSB_1_VENDOR_ID 0x1d50
|
|
#define USB_GSUSB_1_PRODUCT_ID 0x606f
|
|
|
|
#define USB_CANDLELIGHT_VENDOR_ID 0x1209
|
|
#define USB_CANDLELIGHT_PRODUCT_ID 0x2323
|
|
|
|
#define GSUSB_ENDPOINT_IN 1
|
|
#define GSUSB_ENDPOINT_OUT 2
|
|
|
|
/* Device specific constants */
|
|
enum gs_usb_breq {
|
|
GS_USB_BREQ_HOST_FORMAT = 0,
|
|
GS_USB_BREQ_BITTIMING,
|
|
GS_USB_BREQ_MODE,
|
|
GS_USB_BREQ_BERR,
|
|
GS_USB_BREQ_BT_CONST,
|
|
GS_USB_BREQ_DEVICE_CONFIG,
|
|
GS_USB_BREQ_TIMESTAMP,
|
|
GS_USB_BREQ_IDENTIFY,
|
|
};
|
|
|
|
enum gs_can_mode {
|
|
/* reset a channel. turns it off */
|
|
GS_CAN_MODE_RESET = 0,
|
|
/* starts a channel */
|
|
GS_CAN_MODE_START
|
|
};
|
|
|
|
enum gs_can_state {
|
|
GS_CAN_STATE_ERROR_ACTIVE = 0,
|
|
GS_CAN_STATE_ERROR_WARNING,
|
|
GS_CAN_STATE_ERROR_PASSIVE,
|
|
GS_CAN_STATE_BUS_OFF,
|
|
GS_CAN_STATE_STOPPED,
|
|
GS_CAN_STATE_SLEEPING
|
|
};
|
|
|
|
enum gs_can_identify_mode {
|
|
GS_CAN_IDENTIFY_OFF = 0,
|
|
GS_CAN_IDENTIFY_ON
|
|
};
|
|
|
|
/* data types passed between host and device */
|
|
struct gs_host_config {
|
|
u32 byte_order;
|
|
} __packed;
|
|
/* All data exchanged between host and device is exchanged in host byte order,
|
|
* thanks to the struct gs_host_config byte_order member, which is sent first
|
|
* to indicate the desired byte order.
|
|
*/
|
|
|
|
struct gs_device_config {
|
|
u8 reserved1;
|
|
u8 reserved2;
|
|
u8 reserved3;
|
|
u8 icount;
|
|
u32 sw_version;
|
|
u32 hw_version;
|
|
} __packed;
|
|
|
|
#define GS_CAN_MODE_NORMAL 0
|
|
#define GS_CAN_MODE_LISTEN_ONLY BIT(0)
|
|
#define GS_CAN_MODE_LOOP_BACK BIT(1)
|
|
#define GS_CAN_MODE_TRIPLE_SAMPLE BIT(2)
|
|
#define GS_CAN_MODE_ONE_SHOT BIT(3)
|
|
|
|
struct gs_device_mode {
|
|
u32 mode;
|
|
u32 flags;
|
|
} __packed;
|
|
|
|
struct gs_device_state {
|
|
u32 state;
|
|
u32 rxerr;
|
|
u32 txerr;
|
|
} __packed;
|
|
|
|
struct gs_device_bittiming {
|
|
u32 prop_seg;
|
|
u32 phase_seg1;
|
|
u32 phase_seg2;
|
|
u32 sjw;
|
|
u32 brp;
|
|
} __packed;
|
|
|
|
struct gs_identify_mode {
|
|
u32 mode;
|
|
} __packed;
|
|
|
|
#define GS_CAN_FEATURE_LISTEN_ONLY BIT(0)
|
|
#define GS_CAN_FEATURE_LOOP_BACK BIT(1)
|
|
#define GS_CAN_FEATURE_TRIPLE_SAMPLE BIT(2)
|
|
#define GS_CAN_FEATURE_ONE_SHOT BIT(3)
|
|
#define GS_CAN_FEATURE_HW_TIMESTAMP BIT(4)
|
|
#define GS_CAN_FEATURE_IDENTIFY BIT(5)
|
|
|
|
struct gs_device_bt_const {
|
|
u32 feature;
|
|
u32 fclk_can;
|
|
u32 tseg1_min;
|
|
u32 tseg1_max;
|
|
u32 tseg2_min;
|
|
u32 tseg2_max;
|
|
u32 sjw_max;
|
|
u32 brp_min;
|
|
u32 brp_max;
|
|
u32 brp_inc;
|
|
} __packed;
|
|
|
|
#define GS_CAN_FLAG_OVERFLOW 1
|
|
|
|
struct gs_host_frame {
|
|
u32 echo_id;
|
|
u32 can_id;
|
|
|
|
u8 can_dlc;
|
|
u8 channel;
|
|
u8 flags;
|
|
u8 reserved;
|
|
|
|
u8 data[8];
|
|
} __packed;
|
|
/* The GS USB devices make use of the same flags and masks as in
|
|
* linux/can.h and linux/can/error.h, and no additional mapping is necessary.
|
|
*/
|
|
|
|
/* Only send a max of GS_MAX_TX_URBS frames per channel at a time. */
|
|
#define GS_MAX_TX_URBS 10
|
|
/* Only launch a max of GS_MAX_RX_URBS usb requests at a time. */
|
|
#define GS_MAX_RX_URBS 30
|
|
/* Maximum number of interfaces the driver supports per device.
|
|
* Current hardware only supports 2 interfaces. The future may vary.
|
|
*/
|
|
#define GS_MAX_INTF 2
|
|
|
|
struct gs_tx_context {
|
|
struct gs_can *dev;
|
|
unsigned int echo_id;
|
|
};
|
|
|
|
struct gs_can {
|
|
struct can_priv can; /* must be the first member */
|
|
|
|
struct gs_usb *parent;
|
|
|
|
struct net_device *netdev;
|
|
struct usb_device *udev;
|
|
struct usb_interface *iface;
|
|
|
|
struct can_bittiming_const bt_const;
|
|
unsigned int channel; /* channel number */
|
|
|
|
/* This lock prevents a race condition between xmit and receive. */
|
|
spinlock_t tx_ctx_lock;
|
|
struct gs_tx_context tx_context[GS_MAX_TX_URBS];
|
|
|
|
struct usb_anchor tx_submitted;
|
|
atomic_t active_tx_urbs;
|
|
};
|
|
|
|
/* usb interface struct */
|
|
struct gs_usb {
|
|
struct gs_can *canch[GS_MAX_INTF];
|
|
struct usb_anchor rx_submitted;
|
|
atomic_t active_channels;
|
|
struct usb_device *udev;
|
|
};
|
|
|
|
/* 'allocate' a tx context.
|
|
* returns a valid tx context or NULL if there is no space.
|
|
*/
|
|
static struct gs_tx_context *gs_alloc_tx_context(struct gs_can *dev)
|
|
{
|
|
int i = 0;
|
|
unsigned long flags;
|
|
|
|
spin_lock_irqsave(&dev->tx_ctx_lock, flags);
|
|
|
|
for (; i < GS_MAX_TX_URBS; i++) {
|
|
if (dev->tx_context[i].echo_id == GS_MAX_TX_URBS) {
|
|
dev->tx_context[i].echo_id = i;
|
|
spin_unlock_irqrestore(&dev->tx_ctx_lock, flags);
|
|
return &dev->tx_context[i];
|
|
}
|
|
}
|
|
|
|
spin_unlock_irqrestore(&dev->tx_ctx_lock, flags);
|
|
return NULL;
|
|
}
|
|
|
|
/* releases a tx context
|
|
*/
|
|
static void gs_free_tx_context(struct gs_tx_context *txc)
|
|
{
|
|
txc->echo_id = GS_MAX_TX_URBS;
|
|
}
|
|
|
|
/* Get a tx context by id.
|
|
*/
|
|
static struct gs_tx_context *gs_get_tx_context(struct gs_can *dev,
|
|
unsigned int id)
|
|
{
|
|
unsigned long flags;
|
|
|
|
if (id < GS_MAX_TX_URBS) {
|
|
spin_lock_irqsave(&dev->tx_ctx_lock, flags);
|
|
if (dev->tx_context[id].echo_id == id) {
|
|
spin_unlock_irqrestore(&dev->tx_ctx_lock, flags);
|
|
return &dev->tx_context[id];
|
|
}
|
|
spin_unlock_irqrestore(&dev->tx_ctx_lock, flags);
|
|
}
|
|
return NULL;
|
|
}
|
|
|
|
static int gs_cmd_reset(struct gs_can *gsdev)
|
|
{
|
|
struct gs_device_mode *dm;
|
|
struct usb_interface *intf = gsdev->iface;
|
|
int rc;
|
|
|
|
dm = kzalloc(sizeof(*dm), GFP_KERNEL);
|
|
if (!dm)
|
|
return -ENOMEM;
|
|
|
|
dm->mode = GS_CAN_MODE_RESET;
|
|
|
|
rc = usb_control_msg(interface_to_usbdev(intf),
|
|
usb_sndctrlpipe(interface_to_usbdev(intf), 0),
|
|
GS_USB_BREQ_MODE,
|
|
USB_DIR_OUT | USB_TYPE_VENDOR | USB_RECIP_INTERFACE,
|
|
gsdev->channel,
|
|
0,
|
|
dm,
|
|
sizeof(*dm),
|
|
1000);
|
|
|
|
kfree(dm);
|
|
|
|
return rc;
|
|
}
|
|
|
|
static void gs_update_state(struct gs_can *dev, struct can_frame *cf)
|
|
{
|
|
struct can_device_stats *can_stats = &dev->can.can_stats;
|
|
|
|
if (cf->can_id & CAN_ERR_RESTARTED) {
|
|
dev->can.state = CAN_STATE_ERROR_ACTIVE;
|
|
can_stats->restarts++;
|
|
} else if (cf->can_id & CAN_ERR_BUSOFF) {
|
|
dev->can.state = CAN_STATE_BUS_OFF;
|
|
can_stats->bus_off++;
|
|
} else if (cf->can_id & CAN_ERR_CRTL) {
|
|
if ((cf->data[1] & CAN_ERR_CRTL_TX_WARNING) ||
|
|
(cf->data[1] & CAN_ERR_CRTL_RX_WARNING)) {
|
|
dev->can.state = CAN_STATE_ERROR_WARNING;
|
|
can_stats->error_warning++;
|
|
} else if ((cf->data[1] & CAN_ERR_CRTL_TX_PASSIVE) ||
|
|
(cf->data[1] & CAN_ERR_CRTL_RX_PASSIVE)) {
|
|
dev->can.state = CAN_STATE_ERROR_PASSIVE;
|
|
can_stats->error_passive++;
|
|
} else {
|
|
dev->can.state = CAN_STATE_ERROR_ACTIVE;
|
|
}
|
|
}
|
|
}
|
|
|
|
static void gs_usb_receive_bulk_callback(struct urb *urb)
|
|
{
|
|
struct gs_usb *usbcan = urb->context;
|
|
struct gs_can *dev;
|
|
struct net_device *netdev;
|
|
int rc;
|
|
struct net_device_stats *stats;
|
|
struct gs_host_frame *hf = urb->transfer_buffer;
|
|
struct gs_tx_context *txc;
|
|
struct can_frame *cf;
|
|
struct sk_buff *skb;
|
|
|
|
BUG_ON(!usbcan);
|
|
|
|
switch (urb->status) {
|
|
case 0: /* success */
|
|
break;
|
|
case -ENOENT:
|
|
case -ESHUTDOWN:
|
|
return;
|
|
default:
|
|
/* do not resubmit aborted urbs. eg: when device goes down */
|
|
return;
|
|
}
|
|
|
|
/* device reports out of range channel id */
|
|
if (hf->channel >= GS_MAX_INTF)
|
|
goto resubmit_urb;
|
|
|
|
dev = usbcan->canch[hf->channel];
|
|
|
|
netdev = dev->netdev;
|
|
stats = &netdev->stats;
|
|
|
|
if (!netif_device_present(netdev))
|
|
return;
|
|
|
|
if (hf->echo_id == -1) { /* normal rx */
|
|
skb = alloc_can_skb(dev->netdev, &cf);
|
|
if (!skb)
|
|
return;
|
|
|
|
cf->can_id = hf->can_id;
|
|
|
|
cf->can_dlc = get_can_dlc(hf->can_dlc);
|
|
memcpy(cf->data, hf->data, 8);
|
|
|
|
/* ERROR frames tell us information about the controller */
|
|
if (hf->can_id & CAN_ERR_FLAG)
|
|
gs_update_state(dev, cf);
|
|
|
|
netdev->stats.rx_packets++;
|
|
netdev->stats.rx_bytes += hf->can_dlc;
|
|
|
|
netif_rx(skb);
|
|
} else { /* echo_id == hf->echo_id */
|
|
if (hf->echo_id >= GS_MAX_TX_URBS) {
|
|
netdev_err(netdev,
|
|
"Unexpected out of range echo id %d\n",
|
|
hf->echo_id);
|
|
goto resubmit_urb;
|
|
}
|
|
|
|
netdev->stats.tx_packets++;
|
|
netdev->stats.tx_bytes += hf->can_dlc;
|
|
|
|
txc = gs_get_tx_context(dev, hf->echo_id);
|
|
|
|
/* bad devices send bad echo_ids. */
|
|
if (!txc) {
|
|
netdev_err(netdev,
|
|
"Unexpected unused echo id %d\n",
|
|
hf->echo_id);
|
|
goto resubmit_urb;
|
|
}
|
|
|
|
can_get_echo_skb(netdev, hf->echo_id);
|
|
|
|
gs_free_tx_context(txc);
|
|
|
|
atomic_dec(&dev->active_tx_urbs);
|
|
|
|
netif_wake_queue(netdev);
|
|
}
|
|
|
|
if (hf->flags & GS_CAN_FLAG_OVERFLOW) {
|
|
skb = alloc_can_err_skb(netdev, &cf);
|
|
if (!skb)
|
|
goto resubmit_urb;
|
|
|
|
cf->can_id |= CAN_ERR_CRTL;
|
|
cf->can_dlc = CAN_ERR_DLC;
|
|
cf->data[1] = CAN_ERR_CRTL_RX_OVERFLOW;
|
|
stats->rx_over_errors++;
|
|
stats->rx_errors++;
|
|
netif_rx(skb);
|
|
}
|
|
|
|
resubmit_urb:
|
|
usb_fill_bulk_urb(urb,
|
|
usbcan->udev,
|
|
usb_rcvbulkpipe(usbcan->udev, GSUSB_ENDPOINT_IN),
|
|
hf,
|
|
sizeof(struct gs_host_frame),
|
|
gs_usb_receive_bulk_callback,
|
|
usbcan
|
|
);
|
|
|
|
rc = usb_submit_urb(urb, GFP_ATOMIC);
|
|
|
|
/* USB failure take down all interfaces */
|
|
if (rc == -ENODEV) {
|
|
for (rc = 0; rc < GS_MAX_INTF; rc++) {
|
|
if (usbcan->canch[rc])
|
|
netif_device_detach(usbcan->canch[rc]->netdev);
|
|
}
|
|
}
|
|
}
|
|
|
|
static int gs_usb_set_bittiming(struct net_device *netdev)
|
|
{
|
|
struct gs_can *dev = netdev_priv(netdev);
|
|
struct can_bittiming *bt = &dev->can.bittiming;
|
|
struct usb_interface *intf = dev->iface;
|
|
int rc;
|
|
struct gs_device_bittiming *dbt;
|
|
|
|
dbt = kmalloc(sizeof(*dbt), GFP_KERNEL);
|
|
if (!dbt)
|
|
return -ENOMEM;
|
|
|
|
dbt->prop_seg = bt->prop_seg;
|
|
dbt->phase_seg1 = bt->phase_seg1;
|
|
dbt->phase_seg2 = bt->phase_seg2;
|
|
dbt->sjw = bt->sjw;
|
|
dbt->brp = bt->brp;
|
|
|
|
/* request bit timings */
|
|
rc = usb_control_msg(interface_to_usbdev(intf),
|
|
usb_sndctrlpipe(interface_to_usbdev(intf), 0),
|
|
GS_USB_BREQ_BITTIMING,
|
|
USB_DIR_OUT | USB_TYPE_VENDOR | USB_RECIP_INTERFACE,
|
|
dev->channel,
|
|
0,
|
|
dbt,
|
|
sizeof(*dbt),
|
|
1000);
|
|
|
|
kfree(dbt);
|
|
|
|
if (rc < 0)
|
|
dev_err(netdev->dev.parent, "Couldn't set bittimings (err=%d)",
|
|
rc);
|
|
|
|
return (rc > 0) ? 0 : rc;
|
|
}
|
|
|
|
static void gs_usb_xmit_callback(struct urb *urb)
|
|
{
|
|
struct gs_tx_context *txc = urb->context;
|
|
struct gs_can *dev = txc->dev;
|
|
struct net_device *netdev = dev->netdev;
|
|
|
|
if (urb->status)
|
|
netdev_info(netdev, "usb xmit fail %d\n", txc->echo_id);
|
|
|
|
usb_free_coherent(urb->dev,
|
|
urb->transfer_buffer_length,
|
|
urb->transfer_buffer,
|
|
urb->transfer_dma);
|
|
}
|
|
|
|
static netdev_tx_t gs_can_start_xmit(struct sk_buff *skb,
|
|
struct net_device *netdev)
|
|
{
|
|
struct gs_can *dev = netdev_priv(netdev);
|
|
struct net_device_stats *stats = &dev->netdev->stats;
|
|
struct urb *urb;
|
|
struct gs_host_frame *hf;
|
|
struct can_frame *cf;
|
|
int rc;
|
|
unsigned int idx;
|
|
struct gs_tx_context *txc;
|
|
|
|
if (can_dropped_invalid_skb(netdev, skb))
|
|
return NETDEV_TX_OK;
|
|
|
|
/* find an empty context to keep track of transmission */
|
|
txc = gs_alloc_tx_context(dev);
|
|
if (!txc)
|
|
return NETDEV_TX_BUSY;
|
|
|
|
/* create a URB, and a buffer for it */
|
|
urb = usb_alloc_urb(0, GFP_ATOMIC);
|
|
if (!urb)
|
|
goto nomem_urb;
|
|
|
|
hf = usb_alloc_coherent(dev->udev, sizeof(*hf), GFP_ATOMIC,
|
|
&urb->transfer_dma);
|
|
if (!hf) {
|
|
netdev_err(netdev, "No memory left for USB buffer\n");
|
|
goto nomem_hf;
|
|
}
|
|
|
|
idx = txc->echo_id;
|
|
|
|
if (idx >= GS_MAX_TX_URBS) {
|
|
netdev_err(netdev, "Invalid tx context %d\n", idx);
|
|
goto badidx;
|
|
}
|
|
|
|
hf->echo_id = idx;
|
|
hf->channel = dev->channel;
|
|
|
|
cf = (struct can_frame *)skb->data;
|
|
|
|
hf->can_id = cf->can_id;
|
|
hf->can_dlc = cf->can_dlc;
|
|
memcpy(hf->data, cf->data, cf->can_dlc);
|
|
|
|
usb_fill_bulk_urb(urb, dev->udev,
|
|
usb_sndbulkpipe(dev->udev, GSUSB_ENDPOINT_OUT),
|
|
hf,
|
|
sizeof(*hf),
|
|
gs_usb_xmit_callback,
|
|
txc);
|
|
|
|
urb->transfer_flags |= URB_NO_TRANSFER_DMA_MAP;
|
|
usb_anchor_urb(urb, &dev->tx_submitted);
|
|
|
|
can_put_echo_skb(skb, netdev, idx);
|
|
|
|
atomic_inc(&dev->active_tx_urbs);
|
|
|
|
rc = usb_submit_urb(urb, GFP_ATOMIC);
|
|
if (unlikely(rc)) { /* usb send failed */
|
|
atomic_dec(&dev->active_tx_urbs);
|
|
|
|
can_free_echo_skb(netdev, idx);
|
|
gs_free_tx_context(txc);
|
|
|
|
usb_unanchor_urb(urb);
|
|
usb_free_coherent(dev->udev,
|
|
sizeof(*hf),
|
|
hf,
|
|
urb->transfer_dma);
|
|
|
|
if (rc == -ENODEV) {
|
|
netif_device_detach(netdev);
|
|
} else {
|
|
netdev_err(netdev, "usb_submit failed (err=%d)\n", rc);
|
|
stats->tx_dropped++;
|
|
}
|
|
} else {
|
|
/* Slow down tx path */
|
|
if (atomic_read(&dev->active_tx_urbs) >= GS_MAX_TX_URBS)
|
|
netif_stop_queue(netdev);
|
|
}
|
|
|
|
/* let usb core take care of this urb */
|
|
usb_free_urb(urb);
|
|
|
|
return NETDEV_TX_OK;
|
|
|
|
badidx:
|
|
usb_free_coherent(dev->udev,
|
|
sizeof(*hf),
|
|
hf,
|
|
urb->transfer_dma);
|
|
nomem_hf:
|
|
usb_free_urb(urb);
|
|
|
|
nomem_urb:
|
|
gs_free_tx_context(txc);
|
|
dev_kfree_skb(skb);
|
|
stats->tx_dropped++;
|
|
return NETDEV_TX_OK;
|
|
}
|
|
|
|
static int gs_can_open(struct net_device *netdev)
|
|
{
|
|
struct gs_can *dev = netdev_priv(netdev);
|
|
struct gs_usb *parent = dev->parent;
|
|
int rc, i;
|
|
struct gs_device_mode *dm;
|
|
u32 ctrlmode;
|
|
|
|
rc = open_candev(netdev);
|
|
if (rc)
|
|
return rc;
|
|
|
|
if (atomic_add_return(1, &parent->active_channels) == 1) {
|
|
for (i = 0; i < GS_MAX_RX_URBS; i++) {
|
|
struct urb *urb;
|
|
u8 *buf;
|
|
|
|
/* alloc rx urb */
|
|
urb = usb_alloc_urb(0, GFP_KERNEL);
|
|
if (!urb)
|
|
return -ENOMEM;
|
|
|
|
/* alloc rx buffer */
|
|
buf = usb_alloc_coherent(dev->udev,
|
|
sizeof(struct gs_host_frame),
|
|
GFP_KERNEL,
|
|
&urb->transfer_dma);
|
|
if (!buf) {
|
|
netdev_err(netdev,
|
|
"No memory left for USB buffer\n");
|
|
usb_free_urb(urb);
|
|
return -ENOMEM;
|
|
}
|
|
|
|
/* fill, anchor, and submit rx urb */
|
|
usb_fill_bulk_urb(urb,
|
|
dev->udev,
|
|
usb_rcvbulkpipe(dev->udev,
|
|
GSUSB_ENDPOINT_IN),
|
|
buf,
|
|
sizeof(struct gs_host_frame),
|
|
gs_usb_receive_bulk_callback,
|
|
parent);
|
|
urb->transfer_flags |= URB_NO_TRANSFER_DMA_MAP;
|
|
|
|
usb_anchor_urb(urb, &parent->rx_submitted);
|
|
|
|
rc = usb_submit_urb(urb, GFP_KERNEL);
|
|
if (rc) {
|
|
if (rc == -ENODEV)
|
|
netif_device_detach(dev->netdev);
|
|
|
|
netdev_err(netdev,
|
|
"usb_submit failed (err=%d)\n",
|
|
rc);
|
|
|
|
usb_unanchor_urb(urb);
|
|
usb_free_urb(urb);
|
|
break;
|
|
}
|
|
|
|
/* Drop reference,
|
|
* USB core will take care of freeing it
|
|
*/
|
|
usb_free_urb(urb);
|
|
}
|
|
}
|
|
|
|
dm = kmalloc(sizeof(*dm), GFP_KERNEL);
|
|
if (!dm)
|
|
return -ENOMEM;
|
|
|
|
/* flags */
|
|
ctrlmode = dev->can.ctrlmode;
|
|
dm->flags = 0;
|
|
|
|
if (ctrlmode & CAN_CTRLMODE_LOOPBACK)
|
|
dm->flags |= GS_CAN_MODE_LOOP_BACK;
|
|
else if (ctrlmode & CAN_CTRLMODE_LISTENONLY)
|
|
dm->flags |= GS_CAN_MODE_LISTEN_ONLY;
|
|
|
|
/* Controller is not allowed to retry TX
|
|
* this mode is unavailable on atmels uc3c hardware
|
|
*/
|
|
if (ctrlmode & CAN_CTRLMODE_ONE_SHOT)
|
|
dm->flags |= GS_CAN_MODE_ONE_SHOT;
|
|
|
|
if (ctrlmode & CAN_CTRLMODE_3_SAMPLES)
|
|
dm->flags |= GS_CAN_MODE_TRIPLE_SAMPLE;
|
|
|
|
/* finally start device */
|
|
dm->mode = GS_CAN_MODE_START;
|
|
rc = usb_control_msg(interface_to_usbdev(dev->iface),
|
|
usb_sndctrlpipe(interface_to_usbdev(dev->iface), 0),
|
|
GS_USB_BREQ_MODE,
|
|
USB_DIR_OUT | USB_TYPE_VENDOR |
|
|
USB_RECIP_INTERFACE,
|
|
dev->channel,
|
|
0,
|
|
dm,
|
|
sizeof(*dm),
|
|
1000);
|
|
|
|
if (rc < 0) {
|
|
netdev_err(netdev, "Couldn't start device (err=%d)\n", rc);
|
|
kfree(dm);
|
|
return rc;
|
|
}
|
|
|
|
kfree(dm);
|
|
|
|
dev->can.state = CAN_STATE_ERROR_ACTIVE;
|
|
|
|
if (!(dev->can.ctrlmode & CAN_CTRLMODE_LISTENONLY))
|
|
netif_start_queue(netdev);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int gs_can_close(struct net_device *netdev)
|
|
{
|
|
int rc;
|
|
struct gs_can *dev = netdev_priv(netdev);
|
|
struct gs_usb *parent = dev->parent;
|
|
|
|
netif_stop_queue(netdev);
|
|
|
|
/* Stop polling */
|
|
if (atomic_dec_and_test(&parent->active_channels))
|
|
usb_kill_anchored_urbs(&parent->rx_submitted);
|
|
|
|
/* Stop sending URBs */
|
|
usb_kill_anchored_urbs(&dev->tx_submitted);
|
|
atomic_set(&dev->active_tx_urbs, 0);
|
|
|
|
/* reset the device */
|
|
rc = gs_cmd_reset(dev);
|
|
if (rc < 0)
|
|
netdev_warn(netdev, "Couldn't shutdown device (err=%d)", rc);
|
|
|
|
/* reset tx contexts */
|
|
for (rc = 0; rc < GS_MAX_TX_URBS; rc++) {
|
|
dev->tx_context[rc].dev = dev;
|
|
dev->tx_context[rc].echo_id = GS_MAX_TX_URBS;
|
|
}
|
|
|
|
/* close the netdev */
|
|
close_candev(netdev);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static const struct net_device_ops gs_usb_netdev_ops = {
|
|
.ndo_open = gs_can_open,
|
|
.ndo_stop = gs_can_close,
|
|
.ndo_start_xmit = gs_can_start_xmit,
|
|
.ndo_change_mtu = can_change_mtu,
|
|
};
|
|
|
|
static int gs_usb_set_identify(struct net_device *netdev, bool do_identify)
|
|
{
|
|
struct gs_can *dev = netdev_priv(netdev);
|
|
struct gs_identify_mode *imode;
|
|
int rc;
|
|
|
|
imode = kmalloc(sizeof(*imode), GFP_KERNEL);
|
|
|
|
if (!imode)
|
|
return -ENOMEM;
|
|
|
|
if (do_identify)
|
|
imode->mode = GS_CAN_IDENTIFY_ON;
|
|
else
|
|
imode->mode = GS_CAN_IDENTIFY_OFF;
|
|
|
|
rc = usb_control_msg(interface_to_usbdev(dev->iface),
|
|
usb_sndctrlpipe(interface_to_usbdev(dev->iface),
|
|
0),
|
|
GS_USB_BREQ_IDENTIFY,
|
|
USB_DIR_OUT | USB_TYPE_VENDOR |
|
|
USB_RECIP_INTERFACE,
|
|
dev->channel,
|
|
0,
|
|
imode,
|
|
sizeof(*imode),
|
|
100);
|
|
|
|
kfree(imode);
|
|
|
|
return (rc > 0) ? 0 : rc;
|
|
}
|
|
|
|
/* blink LED's for finding the this interface */
|
|
static int gs_usb_set_phys_id(struct net_device *dev,
|
|
enum ethtool_phys_id_state state)
|
|
{
|
|
int rc = 0;
|
|
|
|
switch (state) {
|
|
case ETHTOOL_ID_ACTIVE:
|
|
rc = gs_usb_set_identify(dev, GS_CAN_IDENTIFY_ON);
|
|
break;
|
|
case ETHTOOL_ID_INACTIVE:
|
|
rc = gs_usb_set_identify(dev, GS_CAN_IDENTIFY_OFF);
|
|
break;
|
|
default:
|
|
break;
|
|
}
|
|
|
|
return rc;
|
|
}
|
|
|
|
static const struct ethtool_ops gs_usb_ethtool_ops = {
|
|
.set_phys_id = gs_usb_set_phys_id,
|
|
};
|
|
|
|
static struct gs_can *gs_make_candev(unsigned int channel,
|
|
struct usb_interface *intf,
|
|
struct gs_device_config *dconf)
|
|
{
|
|
struct gs_can *dev;
|
|
struct net_device *netdev;
|
|
int rc;
|
|
struct gs_device_bt_const *bt_const;
|
|
|
|
bt_const = kmalloc(sizeof(*bt_const), GFP_KERNEL);
|
|
if (!bt_const)
|
|
return ERR_PTR(-ENOMEM);
|
|
|
|
/* fetch bit timing constants */
|
|
rc = usb_control_msg(interface_to_usbdev(intf),
|
|
usb_rcvctrlpipe(interface_to_usbdev(intf), 0),
|
|
GS_USB_BREQ_BT_CONST,
|
|
USB_DIR_IN | USB_TYPE_VENDOR | USB_RECIP_INTERFACE,
|
|
channel,
|
|
0,
|
|
bt_const,
|
|
sizeof(*bt_const),
|
|
1000);
|
|
|
|
if (rc < 0) {
|
|
dev_err(&intf->dev,
|
|
"Couldn't get bit timing const for channel (err=%d)\n",
|
|
rc);
|
|
kfree(bt_const);
|
|
return ERR_PTR(rc);
|
|
}
|
|
|
|
/* create netdev */
|
|
netdev = alloc_candev(sizeof(struct gs_can), GS_MAX_TX_URBS);
|
|
if (!netdev) {
|
|
dev_err(&intf->dev, "Couldn't allocate candev\n");
|
|
kfree(bt_const);
|
|
return ERR_PTR(-ENOMEM);
|
|
}
|
|
|
|
dev = netdev_priv(netdev);
|
|
|
|
netdev->netdev_ops = &gs_usb_netdev_ops;
|
|
|
|
netdev->flags |= IFF_ECHO; /* we support full roundtrip echo */
|
|
|
|
/* dev settup */
|
|
strcpy(dev->bt_const.name, "gs_usb");
|
|
dev->bt_const.tseg1_min = bt_const->tseg1_min;
|
|
dev->bt_const.tseg1_max = bt_const->tseg1_max;
|
|
dev->bt_const.tseg2_min = bt_const->tseg2_min;
|
|
dev->bt_const.tseg2_max = bt_const->tseg2_max;
|
|
dev->bt_const.sjw_max = bt_const->sjw_max;
|
|
dev->bt_const.brp_min = bt_const->brp_min;
|
|
dev->bt_const.brp_max = bt_const->brp_max;
|
|
dev->bt_const.brp_inc = bt_const->brp_inc;
|
|
|
|
dev->udev = interface_to_usbdev(intf);
|
|
dev->iface = intf;
|
|
dev->netdev = netdev;
|
|
dev->channel = channel;
|
|
|
|
init_usb_anchor(&dev->tx_submitted);
|
|
atomic_set(&dev->active_tx_urbs, 0);
|
|
spin_lock_init(&dev->tx_ctx_lock);
|
|
for (rc = 0; rc < GS_MAX_TX_URBS; rc++) {
|
|
dev->tx_context[rc].dev = dev;
|
|
dev->tx_context[rc].echo_id = GS_MAX_TX_URBS;
|
|
}
|
|
|
|
/* can settup */
|
|
dev->can.state = CAN_STATE_STOPPED;
|
|
dev->can.clock.freq = bt_const->fclk_can;
|
|
dev->can.bittiming_const = &dev->bt_const;
|
|
dev->can.do_set_bittiming = gs_usb_set_bittiming;
|
|
|
|
dev->can.ctrlmode_supported = 0;
|
|
|
|
if (bt_const->feature & GS_CAN_FEATURE_LISTEN_ONLY)
|
|
dev->can.ctrlmode_supported |= CAN_CTRLMODE_LISTENONLY;
|
|
|
|
if (bt_const->feature & GS_CAN_FEATURE_LOOP_BACK)
|
|
dev->can.ctrlmode_supported |= CAN_CTRLMODE_LOOPBACK;
|
|
|
|
if (bt_const->feature & GS_CAN_FEATURE_TRIPLE_SAMPLE)
|
|
dev->can.ctrlmode_supported |= CAN_CTRLMODE_3_SAMPLES;
|
|
|
|
if (bt_const->feature & GS_CAN_FEATURE_ONE_SHOT)
|
|
dev->can.ctrlmode_supported |= CAN_CTRLMODE_ONE_SHOT;
|
|
|
|
SET_NETDEV_DEV(netdev, &intf->dev);
|
|
|
|
if (dconf->sw_version > 1)
|
|
if (bt_const->feature & GS_CAN_FEATURE_IDENTIFY)
|
|
netdev->ethtool_ops = &gs_usb_ethtool_ops;
|
|
|
|
kfree(bt_const);
|
|
|
|
rc = register_candev(dev->netdev);
|
|
if (rc) {
|
|
free_candev(dev->netdev);
|
|
dev_err(&intf->dev, "Couldn't register candev (err=%d)\n", rc);
|
|
return ERR_PTR(rc);
|
|
}
|
|
|
|
return dev;
|
|
}
|
|
|
|
static void gs_destroy_candev(struct gs_can *dev)
|
|
{
|
|
unregister_candev(dev->netdev);
|
|
usb_kill_anchored_urbs(&dev->tx_submitted);
|
|
free_candev(dev->netdev);
|
|
}
|
|
|
|
static int gs_usb_probe(struct usb_interface *intf,
|
|
const struct usb_device_id *id)
|
|
{
|
|
struct gs_usb *dev;
|
|
int rc = -ENOMEM;
|
|
unsigned int icount, i;
|
|
struct gs_host_config *hconf;
|
|
struct gs_device_config *dconf;
|
|
|
|
hconf = kmalloc(sizeof(*hconf), GFP_KERNEL);
|
|
if (!hconf)
|
|
return -ENOMEM;
|
|
|
|
hconf->byte_order = 0x0000beef;
|
|
|
|
/* send host config */
|
|
rc = usb_control_msg(interface_to_usbdev(intf),
|
|
usb_sndctrlpipe(interface_to_usbdev(intf), 0),
|
|
GS_USB_BREQ_HOST_FORMAT,
|
|
USB_DIR_OUT | USB_TYPE_VENDOR | USB_RECIP_INTERFACE,
|
|
1,
|
|
intf->altsetting[0].desc.bInterfaceNumber,
|
|
hconf,
|
|
sizeof(*hconf),
|
|
1000);
|
|
|
|
kfree(hconf);
|
|
|
|
if (rc < 0) {
|
|
dev_err(&intf->dev, "Couldn't send data format (err=%d)\n",
|
|
rc);
|
|
return rc;
|
|
}
|
|
|
|
dconf = kmalloc(sizeof(*dconf), GFP_KERNEL);
|
|
if (!dconf)
|
|
return -ENOMEM;
|
|
|
|
/* read device config */
|
|
rc = usb_control_msg(interface_to_usbdev(intf),
|
|
usb_rcvctrlpipe(interface_to_usbdev(intf), 0),
|
|
GS_USB_BREQ_DEVICE_CONFIG,
|
|
USB_DIR_IN | USB_TYPE_VENDOR | USB_RECIP_INTERFACE,
|
|
1,
|
|
intf->altsetting[0].desc.bInterfaceNumber,
|
|
dconf,
|
|
sizeof(*dconf),
|
|
1000);
|
|
if (rc < 0) {
|
|
dev_err(&intf->dev, "Couldn't get device config: (err=%d)\n",
|
|
rc);
|
|
kfree(dconf);
|
|
return rc;
|
|
}
|
|
|
|
icount = dconf->icount + 1;
|
|
dev_info(&intf->dev, "Configuring for %d interfaces\n", icount);
|
|
|
|
if (icount > GS_MAX_INTF) {
|
|
dev_err(&intf->dev,
|
|
"Driver cannot handle more that %d CAN interfaces\n",
|
|
GS_MAX_INTF);
|
|
kfree(dconf);
|
|
return -EINVAL;
|
|
}
|
|
|
|
dev = kzalloc(sizeof(*dev), GFP_KERNEL);
|
|
if (!dev) {
|
|
kfree(dconf);
|
|
return -ENOMEM;
|
|
}
|
|
|
|
init_usb_anchor(&dev->rx_submitted);
|
|
|
|
atomic_set(&dev->active_channels, 0);
|
|
|
|
usb_set_intfdata(intf, dev);
|
|
dev->udev = interface_to_usbdev(intf);
|
|
|
|
for (i = 0; i < icount; i++) {
|
|
dev->canch[i] = gs_make_candev(i, intf, dconf);
|
|
if (IS_ERR_OR_NULL(dev->canch[i])) {
|
|
/* save error code to return later */
|
|
rc = PTR_ERR(dev->canch[i]);
|
|
|
|
/* on failure destroy previously created candevs */
|
|
icount = i;
|
|
for (i = 0; i < icount; i++)
|
|
gs_destroy_candev(dev->canch[i]);
|
|
|
|
usb_kill_anchored_urbs(&dev->rx_submitted);
|
|
kfree(dconf);
|
|
kfree(dev);
|
|
return rc;
|
|
}
|
|
dev->canch[i]->parent = dev;
|
|
}
|
|
|
|
kfree(dconf);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static void gs_usb_disconnect(struct usb_interface *intf)
|
|
{
|
|
unsigned i;
|
|
struct gs_usb *dev = usb_get_intfdata(intf);
|
|
usb_set_intfdata(intf, NULL);
|
|
|
|
if (!dev) {
|
|
dev_err(&intf->dev, "Disconnect (nodata)\n");
|
|
return;
|
|
}
|
|
|
|
for (i = 0; i < GS_MAX_INTF; i++)
|
|
if (dev->canch[i])
|
|
gs_destroy_candev(dev->canch[i]);
|
|
|
|
usb_kill_anchored_urbs(&dev->rx_submitted);
|
|
kfree(dev);
|
|
}
|
|
|
|
static const struct usb_device_id gs_usb_table[] = {
|
|
{ USB_DEVICE_INTERFACE_NUMBER(USB_GSUSB_1_VENDOR_ID,
|
|
USB_GSUSB_1_PRODUCT_ID, 0) },
|
|
{ USB_DEVICE_INTERFACE_NUMBER(USB_CANDLELIGHT_VENDOR_ID,
|
|
USB_CANDLELIGHT_PRODUCT_ID, 0) },
|
|
{} /* Terminating entry */
|
|
};
|
|
|
|
MODULE_DEVICE_TABLE(usb, gs_usb_table);
|
|
|
|
static struct usb_driver gs_usb_driver = {
|
|
.name = "gs_usb",
|
|
.probe = gs_usb_probe,
|
|
.disconnect = gs_usb_disconnect,
|
|
.id_table = gs_usb_table,
|
|
};
|
|
|
|
module_usb_driver(gs_usb_driver);
|
|
|
|
MODULE_AUTHOR("Maximilian Schneider <mws@schneidersoft.net>");
|
|
MODULE_DESCRIPTION(
|
|
"Socket CAN device driver for Geschwister Schneider Technologie-, "
|
|
"Entwicklungs- und Vertriebs UG. USB2.0 to CAN interfaces\n"
|
|
"and bytewerk.org candleLight USB CAN interfaces.");
|
|
MODULE_LICENSE("GPL v2");
|