OpenCloudOS-Kernel/drivers/usb
Linus Torvalds a638af00b2 USB fixes for 4.16-rc3
Here are a number of USB fixes for 4.16-rc3
 
 Nothing major, but a number of different fixes all over the place in the
 USB stack for reported issues.  Mostly gadget driver fixes, although the
 typical set of xhci bugfixes are there, along with some new quirks
 additions as well.
 
 All of these have been in linux-next for a while with no reported
 issues.
 
 Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
 -----BEGIN PGP SIGNATURE-----
 
 iG0EABECAC0WIQT0tgzFv3jCIUoxPcsxR9QN2y37KQUCWo613g8cZ3JlZ0Brcm9h
 aC5jb20ACgkQMUfUDdst+ymS1QCcCDbBPEJQAKF64SyHWZfebeFIBpMAnR9vku/h
 1YXAXpcAJE5lGVVva3+I
 =57Qr
 -----END PGP SIGNATURE-----

Merge tag 'usb-4.16-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb

Pull USB fixes from Greg KH:
 "Here are a number of USB fixes for 4.16-rc3

  Nothing major, but a number of different fixes all over the place in
  the USB stack for reported issues. Mostly gadget driver fixes,
  although the typical set of xhci bugfixes are there, along with some
  new quirks additions as well.

  All of these have been in linux-next for a while with no reported
  issues"

* tag 'usb-4.16-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb: (39 commits)
  Revert "usb: musb: host: don't start next rx urb if current one failed"
  usb: musb: fix enumeration after resume
  usb: cdc_acm: prevent race at write to acm while system resumes
  Add delay-init quirk for Corsair K70 RGB keyboards
  usb: ohci: Proper handling of ed_rm_list to handle race condition between usb_kill_urb() and finish_unlinks()
  usb: host: ehci: always enable interrupt for qtd completion at test mode
  usb: ldusb: add PIDs for new CASSY devices supported by this driver
  usb: renesas_usbhs: missed the "running" flag in usb_dmac with rx path
  usb: host: ehci: use correct device pointer for dma ops
  usbip: keep usbip_device sockfd state in sync with tcp_socket
  ohci-hcd: Fix race condition caused by ohci_urb_enqueue() and io_watchdog_func()
  USB: serial: option: Add support for Quectel EP06
  xhci: fix xhci debugfs errors in xhci_stop
  xhci: xhci debugfs device nodes weren't removed after device plugged out
  xhci: Fix xhci debugfs devices node disappearance after hibernation
  xhci: Fix NULL pointer in xhci debugfs
  xhci: Don't print a warning when setting link state for disabled ports
  xhci: workaround for AMD Promontory disabled ports wakeup
  usb: dwc3: core: Fix ULPI PHYs and prevent phy_get/ulpi_init during suspend/resume
  USB: gadget: udc: Add missing platform_device_put() on error in bdc_pci_probe()
  ...
2018-02-22 12:13:01 -08:00
..
atm USB: atm: fix up some remaining DEVICE_ATTR() usage 2018-01-24 08:49:52 +01:00
c67x00 USB: add SPDX identifiers to all remaining Makefiles 2017-11-07 15:53:48 +01:00
chipidea USB: move many drivers to use DEVICE_ATTR_WO 2018-01-24 08:49:52 +01:00
class usb: cdc_acm: prevent race at write to acm while system resumes 2018-02-16 07:52:55 +01:00
common USB: ulpi: fix bus-node lookup 2017-11-28 15:17:48 +01:00
core Add delay-init quirk for Corsair K70 RGB keyboards 2018-02-15 20:52:56 +01:00
dwc2 usb: dwc2: Fix dwc2_hsotg_core_init_disconnected() 2018-02-12 10:59:31 +02:00
dwc3 usb: dwc3: core: Fix ULPI PHYs and prevent phy_get/ulpi_init during suspend/resume 2018-02-15 15:28:35 +02:00
early usb: early: Correct the endpoint type value for bulk in endpoint 2017-12-07 16:03:15 +01:00
gadget USB: gadget: udc: Add missing platform_device_put() on error in bdc_pci_probe() 2018-02-15 15:28:13 +02:00
host USB fixes for 4.16-rc3 2018-02-22 12:13:01 -08:00
image USB/PHY patches for 4.15-rc1 2017-11-13 21:14:07 -08:00
isp1760 USB/PHY patches for 4.15-rc1 2017-11-13 21:14:07 -08:00
misc usb: ldusb: add PIDs for new CASSY devices supported by this driver 2018-02-15 18:44:03 +01:00
mon vfs: do bulk POLL* -> EPOLL* replacement 2018-02-11 14:34:03 -08:00
mtu3 usb: mtu3: fix semicolon.cocci warnings 2018-01-16 10:01:01 +01:00
musb Revert "usb: musb: host: don't start next rx urb if current one failed" 2018-02-20 15:02:46 +01:00
phy usb: phy: mxs: Fix NULL pointer dereference on i.MX23/28 2018-02-12 10:51:37 +02:00
renesas_usbhs usb: renesas_usbhs: missed the "running" flag in usb_dmac with rx path 2018-02-15 18:43:57 +01:00
serial USB: serial: option: Add support for Quectel EP06 2018-02-15 18:36:19 +01:00
storage USB: move many drivers to use DEVICE_ATTR_RO 2018-01-24 08:49:52 +01:00
typec Merge 4.15-rc4 into usb-next 2017-12-18 09:08:05 +01:00
usbip usbip: keep usbip_device sockfd state in sync with tcp_socket 2018-02-15 18:43:57 +01:00
wusbcore USB/PHY patches for 4.15-rc1 2017-11-13 21:14:07 -08:00
Kconfig sparc,leon: Select USB_UHCI_BIG_ENDIAN_{MMIO,DESC} 2018-02-15 21:45:16 +00:00
Makefile License cleanup: add SPDX GPL-2.0 license identifier to files with no license 2017-11-02 11:10:55 +01:00
README
usb-skeleton.c USB: usb-skeleton: Remove redundant license text 2017-11-04 11:55:39 +01:00

README

To understand all the Linux-USB framework, you'll use these resources:

    * This source code.  This is necessarily an evolving work, and
      includes kerneldoc that should help you get a current overview.
      ("make pdfdocs", and then look at "usb.pdf" for host side and
      "gadget.pdf" for peripheral side.)  Also, Documentation/usb has
      more information.

    * The USB 2.0 specification (from www.usb.org), with supplements
      such as those for USB OTG and the various device classes.
      The USB specification has a good overview chapter, and USB
      peripherals conform to the widely known "Chapter 9".

    * Chip specifications for USB controllers.  Examples include
      host controllers (on PCs, servers, and more); peripheral
      controllers (in devices with Linux firmware, like printers or
      cell phones); and hard-wired peripherals like Ethernet adapters.

    * Specifications for other protocols implemented by USB peripheral
      functions.  Some are vendor-specific; others are vendor-neutral
      but just standardized outside of the www.usb.org team.

Here is a list of what each subdirectory here is, and what is contained in
them.

core/		- This is for the core USB host code, including the
		  usbfs files and the hub class driver ("hub_wq").

host/		- This is for USB host controller drivers.  This
		  includes UHCI, OHCI, EHCI, and others that might
		  be used with more specialized "embedded" systems.

gadget/		- This is for USB peripheral controller drivers and
		  the various gadget drivers which talk to them.


Individual USB driver directories.  A new driver should be added to the
first subdirectory in the list below that it fits into.

image/		- This is for still image drivers, like scanners or
		  digital cameras.
../input/	- This is for any driver that uses the input subsystem,
		  like keyboard, mice, touchscreens, tablets, etc.
../media/	- This is for multimedia drivers, like video cameras,
		  radios, and any other drivers that talk to the v4l
		  subsystem.
../net/		- This is for network drivers.
serial/		- This is for USB to serial drivers.
storage/	- This is for USB mass-storage drivers.
class/		- This is for all USB device drivers that do not fit
		  into any of the above categories, and work for a range
		  of USB Class specified devices. 
misc/		- This is for all USB device drivers that do not fit
		  into any of the above categories.