1707 lines
42 KiB
C
1707 lines
42 KiB
C
// SPDX-License-Identifier: GPL-2.0+
|
|
/*
|
|
* Tegra30 External Memory Controller driver
|
|
*
|
|
* Based on downstream driver from NVIDIA and tegra124-emc.c
|
|
* Copyright (C) 2011-2014 NVIDIA Corporation
|
|
*
|
|
* Author: Dmitry Osipenko <digetx@gmail.com>
|
|
* Copyright (C) 2019 GRATE-DRIVER project
|
|
*/
|
|
|
|
#include <linux/clk.h>
|
|
#include <linux/clk/tegra.h>
|
|
#include <linux/debugfs.h>
|
|
#include <linux/delay.h>
|
|
#include <linux/err.h>
|
|
#include <linux/interconnect-provider.h>
|
|
#include <linux/interrupt.h>
|
|
#include <linux/io.h>
|
|
#include <linux/iopoll.h>
|
|
#include <linux/kernel.h>
|
|
#include <linux/module.h>
|
|
#include <linux/mutex.h>
|
|
#include <linux/of_platform.h>
|
|
#include <linux/platform_device.h>
|
|
#include <linux/pm_opp.h>
|
|
#include <linux/slab.h>
|
|
#include <linux/sort.h>
|
|
#include <linux/types.h>
|
|
|
|
#include <soc/tegra/common.h>
|
|
#include <soc/tegra/fuse.h>
|
|
|
|
#include "mc.h"
|
|
|
|
#define EMC_INTSTATUS 0x000
|
|
#define EMC_INTMASK 0x004
|
|
#define EMC_DBG 0x008
|
|
#define EMC_CFG 0x00c
|
|
#define EMC_REFCTRL 0x020
|
|
#define EMC_TIMING_CONTROL 0x028
|
|
#define EMC_RC 0x02c
|
|
#define EMC_RFC 0x030
|
|
#define EMC_RAS 0x034
|
|
#define EMC_RP 0x038
|
|
#define EMC_R2W 0x03c
|
|
#define EMC_W2R 0x040
|
|
#define EMC_R2P 0x044
|
|
#define EMC_W2P 0x048
|
|
#define EMC_RD_RCD 0x04c
|
|
#define EMC_WR_RCD 0x050
|
|
#define EMC_RRD 0x054
|
|
#define EMC_REXT 0x058
|
|
#define EMC_WDV 0x05c
|
|
#define EMC_QUSE 0x060
|
|
#define EMC_QRST 0x064
|
|
#define EMC_QSAFE 0x068
|
|
#define EMC_RDV 0x06c
|
|
#define EMC_REFRESH 0x070
|
|
#define EMC_BURST_REFRESH_NUM 0x074
|
|
#define EMC_PDEX2WR 0x078
|
|
#define EMC_PDEX2RD 0x07c
|
|
#define EMC_PCHG2PDEN 0x080
|
|
#define EMC_ACT2PDEN 0x084
|
|
#define EMC_AR2PDEN 0x088
|
|
#define EMC_RW2PDEN 0x08c
|
|
#define EMC_TXSR 0x090
|
|
#define EMC_TCKE 0x094
|
|
#define EMC_TFAW 0x098
|
|
#define EMC_TRPAB 0x09c
|
|
#define EMC_TCLKSTABLE 0x0a0
|
|
#define EMC_TCLKSTOP 0x0a4
|
|
#define EMC_TREFBW 0x0a8
|
|
#define EMC_QUSE_EXTRA 0x0ac
|
|
#define EMC_ODT_WRITE 0x0b0
|
|
#define EMC_ODT_READ 0x0b4
|
|
#define EMC_WEXT 0x0b8
|
|
#define EMC_CTT 0x0bc
|
|
#define EMC_MRS_WAIT_CNT 0x0c8
|
|
#define EMC_MRS 0x0cc
|
|
#define EMC_EMRS 0x0d0
|
|
#define EMC_SELF_REF 0x0e0
|
|
#define EMC_MRW 0x0e8
|
|
#define EMC_XM2DQSPADCTRL3 0x0f8
|
|
#define EMC_FBIO_SPARE 0x100
|
|
#define EMC_FBIO_CFG5 0x104
|
|
#define EMC_FBIO_CFG6 0x114
|
|
#define EMC_CFG_RSV 0x120
|
|
#define EMC_AUTO_CAL_CONFIG 0x2a4
|
|
#define EMC_AUTO_CAL_INTERVAL 0x2a8
|
|
#define EMC_AUTO_CAL_STATUS 0x2ac
|
|
#define EMC_STATUS 0x2b4
|
|
#define EMC_CFG_2 0x2b8
|
|
#define EMC_CFG_DIG_DLL 0x2bc
|
|
#define EMC_CFG_DIG_DLL_PERIOD 0x2c0
|
|
#define EMC_CTT_DURATION 0x2d8
|
|
#define EMC_CTT_TERM_CTRL 0x2dc
|
|
#define EMC_ZCAL_INTERVAL 0x2e0
|
|
#define EMC_ZCAL_WAIT_CNT 0x2e4
|
|
#define EMC_ZQ_CAL 0x2ec
|
|
#define EMC_XM2CMDPADCTRL 0x2f0
|
|
#define EMC_XM2DQSPADCTRL2 0x2fc
|
|
#define EMC_XM2DQPADCTRL2 0x304
|
|
#define EMC_XM2CLKPADCTRL 0x308
|
|
#define EMC_XM2COMPPADCTRL 0x30c
|
|
#define EMC_XM2VTTGENPADCTRL 0x310
|
|
#define EMC_XM2VTTGENPADCTRL2 0x314
|
|
#define EMC_XM2QUSEPADCTRL 0x318
|
|
#define EMC_DLL_XFORM_DQS0 0x328
|
|
#define EMC_DLL_XFORM_DQS1 0x32c
|
|
#define EMC_DLL_XFORM_DQS2 0x330
|
|
#define EMC_DLL_XFORM_DQS3 0x334
|
|
#define EMC_DLL_XFORM_DQS4 0x338
|
|
#define EMC_DLL_XFORM_DQS5 0x33c
|
|
#define EMC_DLL_XFORM_DQS6 0x340
|
|
#define EMC_DLL_XFORM_DQS7 0x344
|
|
#define EMC_DLL_XFORM_QUSE0 0x348
|
|
#define EMC_DLL_XFORM_QUSE1 0x34c
|
|
#define EMC_DLL_XFORM_QUSE2 0x350
|
|
#define EMC_DLL_XFORM_QUSE3 0x354
|
|
#define EMC_DLL_XFORM_QUSE4 0x358
|
|
#define EMC_DLL_XFORM_QUSE5 0x35c
|
|
#define EMC_DLL_XFORM_QUSE6 0x360
|
|
#define EMC_DLL_XFORM_QUSE7 0x364
|
|
#define EMC_DLL_XFORM_DQ0 0x368
|
|
#define EMC_DLL_XFORM_DQ1 0x36c
|
|
#define EMC_DLL_XFORM_DQ2 0x370
|
|
#define EMC_DLL_XFORM_DQ3 0x374
|
|
#define EMC_DLI_TRIM_TXDQS0 0x3a8
|
|
#define EMC_DLI_TRIM_TXDQS1 0x3ac
|
|
#define EMC_DLI_TRIM_TXDQS2 0x3b0
|
|
#define EMC_DLI_TRIM_TXDQS3 0x3b4
|
|
#define EMC_DLI_TRIM_TXDQS4 0x3b8
|
|
#define EMC_DLI_TRIM_TXDQS5 0x3bc
|
|
#define EMC_DLI_TRIM_TXDQS6 0x3c0
|
|
#define EMC_DLI_TRIM_TXDQS7 0x3c4
|
|
#define EMC_STALL_THEN_EXE_BEFORE_CLKCHANGE 0x3c8
|
|
#define EMC_STALL_THEN_EXE_AFTER_CLKCHANGE 0x3cc
|
|
#define EMC_UNSTALL_RW_AFTER_CLKCHANGE 0x3d0
|
|
#define EMC_SEL_DPD_CTRL 0x3d8
|
|
#define EMC_PRE_REFRESH_REQ_CNT 0x3dc
|
|
#define EMC_DYN_SELF_REF_CONTROL 0x3e0
|
|
#define EMC_TXSRDLL 0x3e4
|
|
|
|
#define EMC_STATUS_TIMING_UPDATE_STALLED BIT(23)
|
|
|
|
#define EMC_MODE_SET_DLL_RESET BIT(8)
|
|
#define EMC_MODE_SET_LONG_CNT BIT(26)
|
|
|
|
#define EMC_SELF_REF_CMD_ENABLED BIT(0)
|
|
|
|
#define DRAM_DEV_SEL_ALL (0 << 30)
|
|
#define DRAM_DEV_SEL_0 (2 << 30)
|
|
#define DRAM_DEV_SEL_1 (1 << 30)
|
|
#define DRAM_BROADCAST(num) \
|
|
((num) > 1 ? DRAM_DEV_SEL_ALL : DRAM_DEV_SEL_0)
|
|
|
|
#define EMC_ZQ_CAL_CMD BIT(0)
|
|
#define EMC_ZQ_CAL_LONG BIT(4)
|
|
#define EMC_ZQ_CAL_LONG_CMD_DEV0 \
|
|
(DRAM_DEV_SEL_0 | EMC_ZQ_CAL_LONG | EMC_ZQ_CAL_CMD)
|
|
#define EMC_ZQ_CAL_LONG_CMD_DEV1 \
|
|
(DRAM_DEV_SEL_1 | EMC_ZQ_CAL_LONG | EMC_ZQ_CAL_CMD)
|
|
|
|
#define EMC_DBG_READ_MUX_ASSEMBLY BIT(0)
|
|
#define EMC_DBG_WRITE_MUX_ACTIVE BIT(1)
|
|
#define EMC_DBG_FORCE_UPDATE BIT(2)
|
|
#define EMC_DBG_CFG_PRIORITY BIT(24)
|
|
|
|
#define EMC_CFG5_QUSE_MODE_SHIFT 13
|
|
#define EMC_CFG5_QUSE_MODE_MASK (7 << EMC_CFG5_QUSE_MODE_SHIFT)
|
|
|
|
#define EMC_CFG5_QUSE_MODE_INTERNAL_LPBK 2
|
|
#define EMC_CFG5_QUSE_MODE_PULSE_INTERN 3
|
|
|
|
#define EMC_SEL_DPD_CTRL_QUSE_DPD_ENABLE BIT(9)
|
|
|
|
#define EMC_XM2COMPPADCTRL_VREF_CAL_ENABLE BIT(10)
|
|
|
|
#define EMC_XM2QUSEPADCTRL_IVREF_ENABLE BIT(4)
|
|
|
|
#define EMC_XM2DQSPADCTRL2_VREF_ENABLE BIT(5)
|
|
#define EMC_XM2DQSPADCTRL3_VREF_ENABLE BIT(5)
|
|
|
|
#define EMC_AUTO_CAL_STATUS_ACTIVE BIT(31)
|
|
|
|
#define EMC_FBIO_CFG5_DRAM_TYPE_MASK 0x3
|
|
|
|
#define EMC_MRS_WAIT_CNT_SHORT_WAIT_MASK 0x3ff
|
|
#define EMC_MRS_WAIT_CNT_LONG_WAIT_SHIFT 16
|
|
#define EMC_MRS_WAIT_CNT_LONG_WAIT_MASK \
|
|
(0x3ff << EMC_MRS_WAIT_CNT_LONG_WAIT_SHIFT)
|
|
|
|
#define EMC_REFCTRL_DEV_SEL_MASK 0x3
|
|
#define EMC_REFCTRL_ENABLE BIT(31)
|
|
#define EMC_REFCTRL_ENABLE_ALL(num) \
|
|
(((num) > 1 ? 0 : 2) | EMC_REFCTRL_ENABLE)
|
|
#define EMC_REFCTRL_DISABLE_ALL(num) ((num) > 1 ? 0 : 2)
|
|
|
|
#define EMC_CFG_PERIODIC_QRST BIT(21)
|
|
#define EMC_CFG_DYN_SREF_ENABLE BIT(28)
|
|
|
|
#define EMC_CLKCHANGE_REQ_ENABLE BIT(0)
|
|
#define EMC_CLKCHANGE_PD_ENABLE BIT(1)
|
|
#define EMC_CLKCHANGE_SR_ENABLE BIT(2)
|
|
|
|
#define EMC_TIMING_UPDATE BIT(0)
|
|
|
|
#define EMC_REFRESH_OVERFLOW_INT BIT(3)
|
|
#define EMC_CLKCHANGE_COMPLETE_INT BIT(4)
|
|
|
|
enum emc_dram_type {
|
|
DRAM_TYPE_DDR3,
|
|
DRAM_TYPE_DDR1,
|
|
DRAM_TYPE_LPDDR2,
|
|
DRAM_TYPE_DDR2,
|
|
};
|
|
|
|
enum emc_dll_change {
|
|
DLL_CHANGE_NONE,
|
|
DLL_CHANGE_ON,
|
|
DLL_CHANGE_OFF
|
|
};
|
|
|
|
static const u16 emc_timing_registers[] = {
|
|
[0] = EMC_RC,
|
|
[1] = EMC_RFC,
|
|
[2] = EMC_RAS,
|
|
[3] = EMC_RP,
|
|
[4] = EMC_R2W,
|
|
[5] = EMC_W2R,
|
|
[6] = EMC_R2P,
|
|
[7] = EMC_W2P,
|
|
[8] = EMC_RD_RCD,
|
|
[9] = EMC_WR_RCD,
|
|
[10] = EMC_RRD,
|
|
[11] = EMC_REXT,
|
|
[12] = EMC_WEXT,
|
|
[13] = EMC_WDV,
|
|
[14] = EMC_QUSE,
|
|
[15] = EMC_QRST,
|
|
[16] = EMC_QSAFE,
|
|
[17] = EMC_RDV,
|
|
[18] = EMC_REFRESH,
|
|
[19] = EMC_BURST_REFRESH_NUM,
|
|
[20] = EMC_PRE_REFRESH_REQ_CNT,
|
|
[21] = EMC_PDEX2WR,
|
|
[22] = EMC_PDEX2RD,
|
|
[23] = EMC_PCHG2PDEN,
|
|
[24] = EMC_ACT2PDEN,
|
|
[25] = EMC_AR2PDEN,
|
|
[26] = EMC_RW2PDEN,
|
|
[27] = EMC_TXSR,
|
|
[28] = EMC_TXSRDLL,
|
|
[29] = EMC_TCKE,
|
|
[30] = EMC_TFAW,
|
|
[31] = EMC_TRPAB,
|
|
[32] = EMC_TCLKSTABLE,
|
|
[33] = EMC_TCLKSTOP,
|
|
[34] = EMC_TREFBW,
|
|
[35] = EMC_QUSE_EXTRA,
|
|
[36] = EMC_FBIO_CFG6,
|
|
[37] = EMC_ODT_WRITE,
|
|
[38] = EMC_ODT_READ,
|
|
[39] = EMC_FBIO_CFG5,
|
|
[40] = EMC_CFG_DIG_DLL,
|
|
[41] = EMC_CFG_DIG_DLL_PERIOD,
|
|
[42] = EMC_DLL_XFORM_DQS0,
|
|
[43] = EMC_DLL_XFORM_DQS1,
|
|
[44] = EMC_DLL_XFORM_DQS2,
|
|
[45] = EMC_DLL_XFORM_DQS3,
|
|
[46] = EMC_DLL_XFORM_DQS4,
|
|
[47] = EMC_DLL_XFORM_DQS5,
|
|
[48] = EMC_DLL_XFORM_DQS6,
|
|
[49] = EMC_DLL_XFORM_DQS7,
|
|
[50] = EMC_DLL_XFORM_QUSE0,
|
|
[51] = EMC_DLL_XFORM_QUSE1,
|
|
[52] = EMC_DLL_XFORM_QUSE2,
|
|
[53] = EMC_DLL_XFORM_QUSE3,
|
|
[54] = EMC_DLL_XFORM_QUSE4,
|
|
[55] = EMC_DLL_XFORM_QUSE5,
|
|
[56] = EMC_DLL_XFORM_QUSE6,
|
|
[57] = EMC_DLL_XFORM_QUSE7,
|
|
[58] = EMC_DLI_TRIM_TXDQS0,
|
|
[59] = EMC_DLI_TRIM_TXDQS1,
|
|
[60] = EMC_DLI_TRIM_TXDQS2,
|
|
[61] = EMC_DLI_TRIM_TXDQS3,
|
|
[62] = EMC_DLI_TRIM_TXDQS4,
|
|
[63] = EMC_DLI_TRIM_TXDQS5,
|
|
[64] = EMC_DLI_TRIM_TXDQS6,
|
|
[65] = EMC_DLI_TRIM_TXDQS7,
|
|
[66] = EMC_DLL_XFORM_DQ0,
|
|
[67] = EMC_DLL_XFORM_DQ1,
|
|
[68] = EMC_DLL_XFORM_DQ2,
|
|
[69] = EMC_DLL_XFORM_DQ3,
|
|
[70] = EMC_XM2CMDPADCTRL,
|
|
[71] = EMC_XM2DQSPADCTRL2,
|
|
[72] = EMC_XM2DQPADCTRL2,
|
|
[73] = EMC_XM2CLKPADCTRL,
|
|
[74] = EMC_XM2COMPPADCTRL,
|
|
[75] = EMC_XM2VTTGENPADCTRL,
|
|
[76] = EMC_XM2VTTGENPADCTRL2,
|
|
[77] = EMC_XM2QUSEPADCTRL,
|
|
[78] = EMC_XM2DQSPADCTRL3,
|
|
[79] = EMC_CTT_TERM_CTRL,
|
|
[80] = EMC_ZCAL_INTERVAL,
|
|
[81] = EMC_ZCAL_WAIT_CNT,
|
|
[82] = EMC_MRS_WAIT_CNT,
|
|
[83] = EMC_AUTO_CAL_CONFIG,
|
|
[84] = EMC_CTT,
|
|
[85] = EMC_CTT_DURATION,
|
|
[86] = EMC_DYN_SELF_REF_CONTROL,
|
|
[87] = EMC_FBIO_SPARE,
|
|
[88] = EMC_CFG_RSV,
|
|
};
|
|
|
|
struct emc_timing {
|
|
unsigned long rate;
|
|
|
|
u32 data[ARRAY_SIZE(emc_timing_registers)];
|
|
|
|
u32 emc_auto_cal_interval;
|
|
u32 emc_mode_1;
|
|
u32 emc_mode_2;
|
|
u32 emc_mode_reset;
|
|
u32 emc_zcal_cnt_long;
|
|
bool emc_cfg_periodic_qrst;
|
|
bool emc_cfg_dyn_self_ref;
|
|
};
|
|
|
|
enum emc_rate_request_type {
|
|
EMC_RATE_DEBUG,
|
|
EMC_RATE_ICC,
|
|
EMC_RATE_TYPE_MAX,
|
|
};
|
|
|
|
struct emc_rate_request {
|
|
unsigned long min_rate;
|
|
unsigned long max_rate;
|
|
};
|
|
|
|
struct tegra_emc {
|
|
struct device *dev;
|
|
struct tegra_mc *mc;
|
|
struct icc_provider provider;
|
|
struct notifier_block clk_nb;
|
|
struct clk *clk;
|
|
void __iomem *regs;
|
|
unsigned int irq;
|
|
bool bad_state;
|
|
|
|
struct emc_timing *new_timing;
|
|
struct emc_timing *timings;
|
|
unsigned int num_timings;
|
|
|
|
u32 mc_override;
|
|
u32 emc_cfg;
|
|
|
|
u32 emc_mode_1;
|
|
u32 emc_mode_2;
|
|
u32 emc_mode_reset;
|
|
|
|
bool vref_cal_toggle : 1;
|
|
bool zcal_long : 1;
|
|
bool dll_on : 1;
|
|
|
|
struct {
|
|
struct dentry *root;
|
|
unsigned long min_rate;
|
|
unsigned long max_rate;
|
|
} debugfs;
|
|
|
|
/*
|
|
* There are multiple sources in the EMC driver which could request
|
|
* a min/max clock rate, these rates are contained in this array.
|
|
*/
|
|
struct emc_rate_request requested_rate[EMC_RATE_TYPE_MAX];
|
|
|
|
/* protect shared rate-change code path */
|
|
struct mutex rate_lock;
|
|
};
|
|
|
|
static int emc_seq_update_timing(struct tegra_emc *emc)
|
|
{
|
|
u32 val;
|
|
int err;
|
|
|
|
writel_relaxed(EMC_TIMING_UPDATE, emc->regs + EMC_TIMING_CONTROL);
|
|
|
|
err = readl_relaxed_poll_timeout_atomic(emc->regs + EMC_STATUS, val,
|
|
!(val & EMC_STATUS_TIMING_UPDATE_STALLED),
|
|
1, 200);
|
|
if (err) {
|
|
dev_err(emc->dev, "failed to update timing: %d\n", err);
|
|
return err;
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
static irqreturn_t tegra_emc_isr(int irq, void *data)
|
|
{
|
|
struct tegra_emc *emc = data;
|
|
u32 intmask = EMC_REFRESH_OVERFLOW_INT;
|
|
u32 status;
|
|
|
|
status = readl_relaxed(emc->regs + EMC_INTSTATUS) & intmask;
|
|
if (!status)
|
|
return IRQ_NONE;
|
|
|
|
/* notify about HW problem */
|
|
if (status & EMC_REFRESH_OVERFLOW_INT)
|
|
dev_err_ratelimited(emc->dev,
|
|
"refresh request overflow timeout\n");
|
|
|
|
/* clear interrupts */
|
|
writel_relaxed(status, emc->regs + EMC_INTSTATUS);
|
|
|
|
return IRQ_HANDLED;
|
|
}
|
|
|
|
static struct emc_timing *emc_find_timing(struct tegra_emc *emc,
|
|
unsigned long rate)
|
|
{
|
|
struct emc_timing *timing = NULL;
|
|
unsigned int i;
|
|
|
|
for (i = 0; i < emc->num_timings; i++) {
|
|
if (emc->timings[i].rate >= rate) {
|
|
timing = &emc->timings[i];
|
|
break;
|
|
}
|
|
}
|
|
|
|
if (!timing) {
|
|
dev_err(emc->dev, "no timing for rate %lu\n", rate);
|
|
return NULL;
|
|
}
|
|
|
|
return timing;
|
|
}
|
|
|
|
static bool emc_dqs_preset(struct tegra_emc *emc, struct emc_timing *timing,
|
|
bool *schmitt_to_vref)
|
|
{
|
|
bool preset = false;
|
|
u32 val;
|
|
|
|
if (timing->data[71] & EMC_XM2DQSPADCTRL2_VREF_ENABLE) {
|
|
val = readl_relaxed(emc->regs + EMC_XM2DQSPADCTRL2);
|
|
|
|
if (!(val & EMC_XM2DQSPADCTRL2_VREF_ENABLE)) {
|
|
val |= EMC_XM2DQSPADCTRL2_VREF_ENABLE;
|
|
writel_relaxed(val, emc->regs + EMC_XM2DQSPADCTRL2);
|
|
|
|
preset = true;
|
|
}
|
|
}
|
|
|
|
if (timing->data[78] & EMC_XM2DQSPADCTRL3_VREF_ENABLE) {
|
|
val = readl_relaxed(emc->regs + EMC_XM2DQSPADCTRL3);
|
|
|
|
if (!(val & EMC_XM2DQSPADCTRL3_VREF_ENABLE)) {
|
|
val |= EMC_XM2DQSPADCTRL3_VREF_ENABLE;
|
|
writel_relaxed(val, emc->regs + EMC_XM2DQSPADCTRL3);
|
|
|
|
preset = true;
|
|
}
|
|
}
|
|
|
|
if (timing->data[77] & EMC_XM2QUSEPADCTRL_IVREF_ENABLE) {
|
|
val = readl_relaxed(emc->regs + EMC_XM2QUSEPADCTRL);
|
|
|
|
if (!(val & EMC_XM2QUSEPADCTRL_IVREF_ENABLE)) {
|
|
val |= EMC_XM2QUSEPADCTRL_IVREF_ENABLE;
|
|
writel_relaxed(val, emc->regs + EMC_XM2QUSEPADCTRL);
|
|
|
|
*schmitt_to_vref = true;
|
|
preset = true;
|
|
}
|
|
}
|
|
|
|
return preset;
|
|
}
|
|
|
|
static int emc_prepare_mc_clk_cfg(struct tegra_emc *emc, unsigned long rate)
|
|
{
|
|
struct tegra_mc *mc = emc->mc;
|
|
unsigned int misc0_index = 16;
|
|
unsigned int i;
|
|
bool same;
|
|
|
|
for (i = 0; i < mc->num_timings; i++) {
|
|
if (mc->timings[i].rate != rate)
|
|
continue;
|
|
|
|
if (mc->timings[i].emem_data[misc0_index] & BIT(27))
|
|
same = true;
|
|
else
|
|
same = false;
|
|
|
|
return tegra20_clk_prepare_emc_mc_same_freq(emc->clk, same);
|
|
}
|
|
|
|
return -EINVAL;
|
|
}
|
|
|
|
static int emc_prepare_timing_change(struct tegra_emc *emc, unsigned long rate)
|
|
{
|
|
struct emc_timing *timing = emc_find_timing(emc, rate);
|
|
enum emc_dll_change dll_change;
|
|
enum emc_dram_type dram_type;
|
|
bool schmitt_to_vref = false;
|
|
unsigned int pre_wait = 0;
|
|
bool qrst_used = false;
|
|
unsigned int dram_num;
|
|
unsigned int i;
|
|
u32 fbio_cfg5;
|
|
u32 emc_dbg;
|
|
u32 val;
|
|
int err;
|
|
|
|
if (!timing || emc->bad_state)
|
|
return -EINVAL;
|
|
|
|
dev_dbg(emc->dev, "%s: using timing rate %lu for requested rate %lu\n",
|
|
__func__, timing->rate, rate);
|
|
|
|
emc->bad_state = true;
|
|
|
|
err = emc_prepare_mc_clk_cfg(emc, rate);
|
|
if (err) {
|
|
dev_err(emc->dev, "mc clock preparation failed: %d\n", err);
|
|
return err;
|
|
}
|
|
|
|
emc->vref_cal_toggle = false;
|
|
emc->mc_override = mc_readl(emc->mc, MC_EMEM_ARB_OVERRIDE);
|
|
emc->emc_cfg = readl_relaxed(emc->regs + EMC_CFG);
|
|
emc_dbg = readl_relaxed(emc->regs + EMC_DBG);
|
|
|
|
if (emc->dll_on == !!(timing->emc_mode_1 & 0x1))
|
|
dll_change = DLL_CHANGE_NONE;
|
|
else if (timing->emc_mode_1 & 0x1)
|
|
dll_change = DLL_CHANGE_ON;
|
|
else
|
|
dll_change = DLL_CHANGE_OFF;
|
|
|
|
emc->dll_on = !!(timing->emc_mode_1 & 0x1);
|
|
|
|
if (timing->data[80] && !readl_relaxed(emc->regs + EMC_ZCAL_INTERVAL))
|
|
emc->zcal_long = true;
|
|
else
|
|
emc->zcal_long = false;
|
|
|
|
fbio_cfg5 = readl_relaxed(emc->regs + EMC_FBIO_CFG5);
|
|
dram_type = fbio_cfg5 & EMC_FBIO_CFG5_DRAM_TYPE_MASK;
|
|
|
|
dram_num = tegra_mc_get_emem_device_count(emc->mc);
|
|
|
|
/* disable dynamic self-refresh */
|
|
if (emc->emc_cfg & EMC_CFG_DYN_SREF_ENABLE) {
|
|
emc->emc_cfg &= ~EMC_CFG_DYN_SREF_ENABLE;
|
|
writel_relaxed(emc->emc_cfg, emc->regs + EMC_CFG);
|
|
|
|
pre_wait = 5;
|
|
}
|
|
|
|
/* update MC arbiter settings */
|
|
val = mc_readl(emc->mc, MC_EMEM_ARB_OUTSTANDING_REQ);
|
|
if (!(val & MC_EMEM_ARB_OUTSTANDING_REQ_HOLDOFF_OVERRIDE) ||
|
|
((val & MC_EMEM_ARB_OUTSTANDING_REQ_MAX_MASK) > 0x50)) {
|
|
|
|
val = MC_EMEM_ARB_OUTSTANDING_REQ_LIMIT_ENABLE |
|
|
MC_EMEM_ARB_OUTSTANDING_REQ_HOLDOFF_OVERRIDE | 0x50;
|
|
mc_writel(emc->mc, val, MC_EMEM_ARB_OUTSTANDING_REQ);
|
|
mc_writel(emc->mc, MC_TIMING_UPDATE, MC_TIMING_CONTROL);
|
|
}
|
|
|
|
if (emc->mc_override & MC_EMEM_ARB_OVERRIDE_EACK_MASK)
|
|
mc_writel(emc->mc,
|
|
emc->mc_override & ~MC_EMEM_ARB_OVERRIDE_EACK_MASK,
|
|
MC_EMEM_ARB_OVERRIDE);
|
|
|
|
/* check DQ/DQS VREF delay */
|
|
if (emc_dqs_preset(emc, timing, &schmitt_to_vref)) {
|
|
if (pre_wait < 3)
|
|
pre_wait = 3;
|
|
}
|
|
|
|
if (pre_wait) {
|
|
err = emc_seq_update_timing(emc);
|
|
if (err)
|
|
return err;
|
|
|
|
udelay(pre_wait);
|
|
}
|
|
|
|
/* disable auto-calibration if VREF mode is switching */
|
|
if (timing->emc_auto_cal_interval) {
|
|
val = readl_relaxed(emc->regs + EMC_XM2COMPPADCTRL);
|
|
val ^= timing->data[74];
|
|
|
|
if (val & EMC_XM2COMPPADCTRL_VREF_CAL_ENABLE) {
|
|
writel_relaxed(0, emc->regs + EMC_AUTO_CAL_INTERVAL);
|
|
|
|
err = readl_relaxed_poll_timeout_atomic(
|
|
emc->regs + EMC_AUTO_CAL_STATUS, val,
|
|
!(val & EMC_AUTO_CAL_STATUS_ACTIVE), 1, 300);
|
|
if (err) {
|
|
dev_err(emc->dev,
|
|
"auto-cal finish timeout: %d\n", err);
|
|
return err;
|
|
}
|
|
|
|
emc->vref_cal_toggle = true;
|
|
}
|
|
}
|
|
|
|
/* program shadow registers */
|
|
for (i = 0; i < ARRAY_SIZE(timing->data); i++) {
|
|
/* EMC_XM2CLKPADCTRL should be programmed separately */
|
|
if (i != 73)
|
|
writel_relaxed(timing->data[i],
|
|
emc->regs + emc_timing_registers[i]);
|
|
}
|
|
|
|
err = tegra_mc_write_emem_configuration(emc->mc, timing->rate);
|
|
if (err)
|
|
return err;
|
|
|
|
/* DDR3: predict MRS long wait count */
|
|
if (dram_type == DRAM_TYPE_DDR3 && dll_change == DLL_CHANGE_ON) {
|
|
u32 cnt = 512;
|
|
|
|
if (emc->zcal_long)
|
|
cnt -= dram_num * 256;
|
|
|
|
val = timing->data[82] & EMC_MRS_WAIT_CNT_SHORT_WAIT_MASK;
|
|
if (cnt < val)
|
|
cnt = val;
|
|
|
|
val = timing->data[82] & ~EMC_MRS_WAIT_CNT_LONG_WAIT_MASK;
|
|
val |= (cnt << EMC_MRS_WAIT_CNT_LONG_WAIT_SHIFT) &
|
|
EMC_MRS_WAIT_CNT_LONG_WAIT_MASK;
|
|
|
|
writel_relaxed(val, emc->regs + EMC_MRS_WAIT_CNT);
|
|
}
|
|
|
|
/* this read also completes the writes */
|
|
val = readl_relaxed(emc->regs + EMC_SEL_DPD_CTRL);
|
|
|
|
if (!(val & EMC_SEL_DPD_CTRL_QUSE_DPD_ENABLE) && schmitt_to_vref) {
|
|
u32 cur_mode, new_mode;
|
|
|
|
cur_mode = fbio_cfg5 & EMC_CFG5_QUSE_MODE_MASK;
|
|
cur_mode >>= EMC_CFG5_QUSE_MODE_SHIFT;
|
|
|
|
new_mode = timing->data[39] & EMC_CFG5_QUSE_MODE_MASK;
|
|
new_mode >>= EMC_CFG5_QUSE_MODE_SHIFT;
|
|
|
|
if ((cur_mode != EMC_CFG5_QUSE_MODE_PULSE_INTERN &&
|
|
cur_mode != EMC_CFG5_QUSE_MODE_INTERNAL_LPBK) ||
|
|
(new_mode != EMC_CFG5_QUSE_MODE_PULSE_INTERN &&
|
|
new_mode != EMC_CFG5_QUSE_MODE_INTERNAL_LPBK))
|
|
qrst_used = true;
|
|
}
|
|
|
|
/* flow control marker 1 */
|
|
writel_relaxed(0x1, emc->regs + EMC_STALL_THEN_EXE_BEFORE_CLKCHANGE);
|
|
|
|
/* enable periodic reset */
|
|
if (qrst_used) {
|
|
writel_relaxed(emc_dbg | EMC_DBG_WRITE_MUX_ACTIVE,
|
|
emc->regs + EMC_DBG);
|
|
writel_relaxed(emc->emc_cfg | EMC_CFG_PERIODIC_QRST,
|
|
emc->regs + EMC_CFG);
|
|
writel_relaxed(emc_dbg, emc->regs + EMC_DBG);
|
|
}
|
|
|
|
/* disable auto-refresh to save time after clock change */
|
|
writel_relaxed(EMC_REFCTRL_DISABLE_ALL(dram_num),
|
|
emc->regs + EMC_REFCTRL);
|
|
|
|
/* turn off DLL and enter self-refresh on DDR3 */
|
|
if (dram_type == DRAM_TYPE_DDR3) {
|
|
if (dll_change == DLL_CHANGE_OFF)
|
|
writel_relaxed(timing->emc_mode_1,
|
|
emc->regs + EMC_EMRS);
|
|
|
|
writel_relaxed(DRAM_BROADCAST(dram_num) |
|
|
EMC_SELF_REF_CMD_ENABLED,
|
|
emc->regs + EMC_SELF_REF);
|
|
}
|
|
|
|
/* flow control marker 2 */
|
|
writel_relaxed(0x1, emc->regs + EMC_STALL_THEN_EXE_AFTER_CLKCHANGE);
|
|
|
|
/* enable write-active MUX, update unshadowed pad control */
|
|
writel_relaxed(emc_dbg | EMC_DBG_WRITE_MUX_ACTIVE, emc->regs + EMC_DBG);
|
|
writel_relaxed(timing->data[73], emc->regs + EMC_XM2CLKPADCTRL);
|
|
|
|
/* restore periodic QRST and disable write-active MUX */
|
|
val = !!(emc->emc_cfg & EMC_CFG_PERIODIC_QRST);
|
|
if (qrst_used || timing->emc_cfg_periodic_qrst != val) {
|
|
if (timing->emc_cfg_periodic_qrst)
|
|
emc->emc_cfg |= EMC_CFG_PERIODIC_QRST;
|
|
else
|
|
emc->emc_cfg &= ~EMC_CFG_PERIODIC_QRST;
|
|
|
|
writel_relaxed(emc->emc_cfg, emc->regs + EMC_CFG);
|
|
}
|
|
writel_relaxed(emc_dbg, emc->regs + EMC_DBG);
|
|
|
|
/* exit self-refresh on DDR3 */
|
|
if (dram_type == DRAM_TYPE_DDR3)
|
|
writel_relaxed(DRAM_BROADCAST(dram_num),
|
|
emc->regs + EMC_SELF_REF);
|
|
|
|
/* set DRAM-mode registers */
|
|
if (dram_type == DRAM_TYPE_DDR3) {
|
|
if (timing->emc_mode_1 != emc->emc_mode_1)
|
|
writel_relaxed(timing->emc_mode_1,
|
|
emc->regs + EMC_EMRS);
|
|
|
|
if (timing->emc_mode_2 != emc->emc_mode_2)
|
|
writel_relaxed(timing->emc_mode_2,
|
|
emc->regs + EMC_EMRS);
|
|
|
|
if (timing->emc_mode_reset != emc->emc_mode_reset ||
|
|
dll_change == DLL_CHANGE_ON) {
|
|
val = timing->emc_mode_reset;
|
|
if (dll_change == DLL_CHANGE_ON) {
|
|
val |= EMC_MODE_SET_DLL_RESET;
|
|
val |= EMC_MODE_SET_LONG_CNT;
|
|
} else {
|
|
val &= ~EMC_MODE_SET_DLL_RESET;
|
|
}
|
|
writel_relaxed(val, emc->regs + EMC_MRS);
|
|
}
|
|
} else {
|
|
if (timing->emc_mode_2 != emc->emc_mode_2)
|
|
writel_relaxed(timing->emc_mode_2,
|
|
emc->regs + EMC_MRW);
|
|
|
|
if (timing->emc_mode_1 != emc->emc_mode_1)
|
|
writel_relaxed(timing->emc_mode_1,
|
|
emc->regs + EMC_MRW);
|
|
}
|
|
|
|
emc->emc_mode_1 = timing->emc_mode_1;
|
|
emc->emc_mode_2 = timing->emc_mode_2;
|
|
emc->emc_mode_reset = timing->emc_mode_reset;
|
|
|
|
/* issue ZCAL command if turning ZCAL on */
|
|
if (emc->zcal_long) {
|
|
writel_relaxed(EMC_ZQ_CAL_LONG_CMD_DEV0,
|
|
emc->regs + EMC_ZQ_CAL);
|
|
|
|
if (dram_num > 1)
|
|
writel_relaxed(EMC_ZQ_CAL_LONG_CMD_DEV1,
|
|
emc->regs + EMC_ZQ_CAL);
|
|
}
|
|
|
|
/* flow control marker 3 */
|
|
writel_relaxed(0x1, emc->regs + EMC_UNSTALL_RW_AFTER_CLKCHANGE);
|
|
|
|
/*
|
|
* Read and discard an arbitrary MC register (Note: EMC registers
|
|
* can't be used) to ensure the register writes are completed.
|
|
*/
|
|
mc_readl(emc->mc, MC_EMEM_ARB_OVERRIDE);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int emc_complete_timing_change(struct tegra_emc *emc,
|
|
unsigned long rate)
|
|
{
|
|
struct emc_timing *timing = emc_find_timing(emc, rate);
|
|
unsigned int dram_num;
|
|
int err;
|
|
u32 v;
|
|
|
|
err = readl_relaxed_poll_timeout_atomic(emc->regs + EMC_INTSTATUS, v,
|
|
v & EMC_CLKCHANGE_COMPLETE_INT,
|
|
1, 100);
|
|
if (err) {
|
|
dev_err(emc->dev, "emc-car handshake timeout: %d\n", err);
|
|
return err;
|
|
}
|
|
|
|
/* re-enable auto-refresh */
|
|
dram_num = tegra_mc_get_emem_device_count(emc->mc);
|
|
writel_relaxed(EMC_REFCTRL_ENABLE_ALL(dram_num),
|
|
emc->regs + EMC_REFCTRL);
|
|
|
|
/* restore auto-calibration */
|
|
if (emc->vref_cal_toggle)
|
|
writel_relaxed(timing->emc_auto_cal_interval,
|
|
emc->regs + EMC_AUTO_CAL_INTERVAL);
|
|
|
|
/* restore dynamic self-refresh */
|
|
if (timing->emc_cfg_dyn_self_ref) {
|
|
emc->emc_cfg |= EMC_CFG_DYN_SREF_ENABLE;
|
|
writel_relaxed(emc->emc_cfg, emc->regs + EMC_CFG);
|
|
}
|
|
|
|
/* set number of clocks to wait after each ZQ command */
|
|
if (emc->zcal_long)
|
|
writel_relaxed(timing->emc_zcal_cnt_long,
|
|
emc->regs + EMC_ZCAL_WAIT_CNT);
|
|
|
|
/* wait for writes to settle */
|
|
udelay(2);
|
|
|
|
/* update restored timing */
|
|
err = emc_seq_update_timing(emc);
|
|
if (!err)
|
|
emc->bad_state = false;
|
|
|
|
/* restore early ACK */
|
|
mc_writel(emc->mc, emc->mc_override, MC_EMEM_ARB_OVERRIDE);
|
|
|
|
return err;
|
|
}
|
|
|
|
static int emc_unprepare_timing_change(struct tegra_emc *emc,
|
|
unsigned long rate)
|
|
{
|
|
if (!emc->bad_state) {
|
|
/* shouldn't ever happen in practice */
|
|
dev_err(emc->dev, "timing configuration can't be reverted\n");
|
|
emc->bad_state = true;
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int emc_clk_change_notify(struct notifier_block *nb,
|
|
unsigned long msg, void *data)
|
|
{
|
|
struct tegra_emc *emc = container_of(nb, struct tegra_emc, clk_nb);
|
|
struct clk_notifier_data *cnd = data;
|
|
int err;
|
|
|
|
switch (msg) {
|
|
case PRE_RATE_CHANGE:
|
|
/*
|
|
* Disable interrupt since read accesses are prohibited after
|
|
* stalling.
|
|
*/
|
|
disable_irq(emc->irq);
|
|
err = emc_prepare_timing_change(emc, cnd->new_rate);
|
|
enable_irq(emc->irq);
|
|
break;
|
|
|
|
case ABORT_RATE_CHANGE:
|
|
err = emc_unprepare_timing_change(emc, cnd->old_rate);
|
|
break;
|
|
|
|
case POST_RATE_CHANGE:
|
|
err = emc_complete_timing_change(emc, cnd->new_rate);
|
|
break;
|
|
|
|
default:
|
|
return NOTIFY_DONE;
|
|
}
|
|
|
|
return notifier_from_errno(err);
|
|
}
|
|
|
|
static int load_one_timing_from_dt(struct tegra_emc *emc,
|
|
struct emc_timing *timing,
|
|
struct device_node *node)
|
|
{
|
|
u32 value;
|
|
int err;
|
|
|
|
err = of_property_read_u32(node, "clock-frequency", &value);
|
|
if (err) {
|
|
dev_err(emc->dev, "timing %pOF: failed to read rate: %d\n",
|
|
node, err);
|
|
return err;
|
|
}
|
|
|
|
timing->rate = value;
|
|
|
|
err = of_property_read_u32_array(node, "nvidia,emc-configuration",
|
|
timing->data,
|
|
ARRAY_SIZE(emc_timing_registers));
|
|
if (err) {
|
|
dev_err(emc->dev,
|
|
"timing %pOF: failed to read emc timing data: %d\n",
|
|
node, err);
|
|
return err;
|
|
}
|
|
|
|
#define EMC_READ_BOOL(prop, dtprop) \
|
|
timing->prop = of_property_read_bool(node, dtprop);
|
|
|
|
#define EMC_READ_U32(prop, dtprop) \
|
|
err = of_property_read_u32(node, dtprop, &timing->prop); \
|
|
if (err) { \
|
|
dev_err(emc->dev, \
|
|
"timing %pOFn: failed to read " #prop ": %d\n", \
|
|
node, err); \
|
|
return err; \
|
|
}
|
|
|
|
EMC_READ_U32(emc_auto_cal_interval, "nvidia,emc-auto-cal-interval")
|
|
EMC_READ_U32(emc_mode_1, "nvidia,emc-mode-1")
|
|
EMC_READ_U32(emc_mode_2, "nvidia,emc-mode-2")
|
|
EMC_READ_U32(emc_mode_reset, "nvidia,emc-mode-reset")
|
|
EMC_READ_U32(emc_zcal_cnt_long, "nvidia,emc-zcal-cnt-long")
|
|
EMC_READ_BOOL(emc_cfg_dyn_self_ref, "nvidia,emc-cfg-dyn-self-ref")
|
|
EMC_READ_BOOL(emc_cfg_periodic_qrst, "nvidia,emc-cfg-periodic-qrst")
|
|
|
|
#undef EMC_READ_U32
|
|
#undef EMC_READ_BOOL
|
|
|
|
dev_dbg(emc->dev, "%s: %pOF: rate %lu\n", __func__, node, timing->rate);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int cmp_timings(const void *_a, const void *_b)
|
|
{
|
|
const struct emc_timing *a = _a;
|
|
const struct emc_timing *b = _b;
|
|
|
|
if (a->rate < b->rate)
|
|
return -1;
|
|
|
|
if (a->rate > b->rate)
|
|
return 1;
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int emc_check_mc_timings(struct tegra_emc *emc)
|
|
{
|
|
struct tegra_mc *mc = emc->mc;
|
|
unsigned int i;
|
|
|
|
if (emc->num_timings != mc->num_timings) {
|
|
dev_err(emc->dev, "emc/mc timings number mismatch: %u %u\n",
|
|
emc->num_timings, mc->num_timings);
|
|
return -EINVAL;
|
|
}
|
|
|
|
for (i = 0; i < mc->num_timings; i++) {
|
|
if (emc->timings[i].rate != mc->timings[i].rate) {
|
|
dev_err(emc->dev,
|
|
"emc/mc timing rate mismatch: %lu %lu\n",
|
|
emc->timings[i].rate, mc->timings[i].rate);
|
|
return -EINVAL;
|
|
}
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int emc_load_timings_from_dt(struct tegra_emc *emc,
|
|
struct device_node *node)
|
|
{
|
|
struct device_node *child;
|
|
struct emc_timing *timing;
|
|
int child_count;
|
|
int err;
|
|
|
|
child_count = of_get_child_count(node);
|
|
if (!child_count) {
|
|
dev_err(emc->dev, "no memory timings in: %pOF\n", node);
|
|
return -EINVAL;
|
|
}
|
|
|
|
emc->timings = devm_kcalloc(emc->dev, child_count, sizeof(*timing),
|
|
GFP_KERNEL);
|
|
if (!emc->timings)
|
|
return -ENOMEM;
|
|
|
|
emc->num_timings = child_count;
|
|
timing = emc->timings;
|
|
|
|
for_each_child_of_node(node, child) {
|
|
err = load_one_timing_from_dt(emc, timing++, child);
|
|
if (err) {
|
|
of_node_put(child);
|
|
return err;
|
|
}
|
|
}
|
|
|
|
sort(emc->timings, emc->num_timings, sizeof(*timing), cmp_timings,
|
|
NULL);
|
|
|
|
err = emc_check_mc_timings(emc);
|
|
if (err)
|
|
return err;
|
|
|
|
dev_info(emc->dev,
|
|
"got %u timings for RAM code %u (min %luMHz max %luMHz)\n",
|
|
emc->num_timings,
|
|
tegra_read_ram_code(),
|
|
emc->timings[0].rate / 1000000,
|
|
emc->timings[emc->num_timings - 1].rate / 1000000);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static struct device_node *emc_find_node_by_ram_code(struct device *dev)
|
|
{
|
|
struct device_node *np;
|
|
u32 value, ram_code;
|
|
int err;
|
|
|
|
if (of_get_child_count(dev->of_node) == 0) {
|
|
dev_info(dev, "device-tree doesn't have memory timings\n");
|
|
return NULL;
|
|
}
|
|
|
|
ram_code = tegra_read_ram_code();
|
|
|
|
for_each_child_of_node(dev->of_node, np) {
|
|
err = of_property_read_u32(np, "nvidia,ram-code", &value);
|
|
if (err || value != ram_code)
|
|
continue;
|
|
|
|
return np;
|
|
}
|
|
|
|
dev_err(dev, "no memory timings for RAM code %u found in device-tree\n",
|
|
ram_code);
|
|
|
|
return NULL;
|
|
}
|
|
|
|
static int emc_setup_hw(struct tegra_emc *emc)
|
|
{
|
|
u32 intmask = EMC_REFRESH_OVERFLOW_INT;
|
|
u32 fbio_cfg5, emc_cfg, emc_dbg;
|
|
enum emc_dram_type dram_type;
|
|
|
|
fbio_cfg5 = readl_relaxed(emc->regs + EMC_FBIO_CFG5);
|
|
dram_type = fbio_cfg5 & EMC_FBIO_CFG5_DRAM_TYPE_MASK;
|
|
|
|
emc_cfg = readl_relaxed(emc->regs + EMC_CFG_2);
|
|
|
|
/* enable EMC and CAR to handshake on PLL divider/source changes */
|
|
emc_cfg |= EMC_CLKCHANGE_REQ_ENABLE;
|
|
|
|
/* configure clock change mode accordingly to DRAM type */
|
|
switch (dram_type) {
|
|
case DRAM_TYPE_LPDDR2:
|
|
emc_cfg |= EMC_CLKCHANGE_PD_ENABLE;
|
|
emc_cfg &= ~EMC_CLKCHANGE_SR_ENABLE;
|
|
break;
|
|
|
|
default:
|
|
emc_cfg &= ~EMC_CLKCHANGE_SR_ENABLE;
|
|
emc_cfg &= ~EMC_CLKCHANGE_PD_ENABLE;
|
|
break;
|
|
}
|
|
|
|
writel_relaxed(emc_cfg, emc->regs + EMC_CFG_2);
|
|
|
|
/* initialize interrupt */
|
|
writel_relaxed(intmask, emc->regs + EMC_INTMASK);
|
|
writel_relaxed(0xffffffff, emc->regs + EMC_INTSTATUS);
|
|
|
|
/* ensure that unwanted debug features are disabled */
|
|
emc_dbg = readl_relaxed(emc->regs + EMC_DBG);
|
|
emc_dbg |= EMC_DBG_CFG_PRIORITY;
|
|
emc_dbg &= ~EMC_DBG_READ_MUX_ASSEMBLY;
|
|
emc_dbg &= ~EMC_DBG_WRITE_MUX_ACTIVE;
|
|
emc_dbg &= ~EMC_DBG_FORCE_UPDATE;
|
|
writel_relaxed(emc_dbg, emc->regs + EMC_DBG);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static long emc_round_rate(unsigned long rate,
|
|
unsigned long min_rate,
|
|
unsigned long max_rate,
|
|
void *arg)
|
|
{
|
|
struct emc_timing *timing = NULL;
|
|
struct tegra_emc *emc = arg;
|
|
unsigned int i;
|
|
|
|
if (!emc->num_timings)
|
|
return clk_get_rate(emc->clk);
|
|
|
|
min_rate = min(min_rate, emc->timings[emc->num_timings - 1].rate);
|
|
|
|
for (i = 0; i < emc->num_timings; i++) {
|
|
if (emc->timings[i].rate < rate && i != emc->num_timings - 1)
|
|
continue;
|
|
|
|
if (emc->timings[i].rate > max_rate) {
|
|
i = max(i, 1u) - 1;
|
|
|
|
if (emc->timings[i].rate < min_rate)
|
|
break;
|
|
}
|
|
|
|
if (emc->timings[i].rate < min_rate)
|
|
continue;
|
|
|
|
timing = &emc->timings[i];
|
|
break;
|
|
}
|
|
|
|
if (!timing) {
|
|
dev_err(emc->dev, "no timing for rate %lu min %lu max %lu\n",
|
|
rate, min_rate, max_rate);
|
|
return -EINVAL;
|
|
}
|
|
|
|
return timing->rate;
|
|
}
|
|
|
|
static void tegra_emc_rate_requests_init(struct tegra_emc *emc)
|
|
{
|
|
unsigned int i;
|
|
|
|
for (i = 0; i < EMC_RATE_TYPE_MAX; i++) {
|
|
emc->requested_rate[i].min_rate = 0;
|
|
emc->requested_rate[i].max_rate = ULONG_MAX;
|
|
}
|
|
}
|
|
|
|
static int emc_request_rate(struct tegra_emc *emc,
|
|
unsigned long new_min_rate,
|
|
unsigned long new_max_rate,
|
|
enum emc_rate_request_type type)
|
|
{
|
|
struct emc_rate_request *req = emc->requested_rate;
|
|
unsigned long min_rate = 0, max_rate = ULONG_MAX;
|
|
unsigned int i;
|
|
int err;
|
|
|
|
/* select minimum and maximum rates among the requested rates */
|
|
for (i = 0; i < EMC_RATE_TYPE_MAX; i++, req++) {
|
|
if (i == type) {
|
|
min_rate = max(new_min_rate, min_rate);
|
|
max_rate = min(new_max_rate, max_rate);
|
|
} else {
|
|
min_rate = max(req->min_rate, min_rate);
|
|
max_rate = min(req->max_rate, max_rate);
|
|
}
|
|
}
|
|
|
|
if (min_rate > max_rate) {
|
|
dev_err_ratelimited(emc->dev, "%s: type %u: out of range: %lu %lu\n",
|
|
__func__, type, min_rate, max_rate);
|
|
return -ERANGE;
|
|
}
|
|
|
|
/*
|
|
* EMC rate-changes should go via OPP API because it manages voltage
|
|
* changes.
|
|
*/
|
|
err = dev_pm_opp_set_rate(emc->dev, min_rate);
|
|
if (err)
|
|
return err;
|
|
|
|
emc->requested_rate[type].min_rate = new_min_rate;
|
|
emc->requested_rate[type].max_rate = new_max_rate;
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int emc_set_min_rate(struct tegra_emc *emc, unsigned long rate,
|
|
enum emc_rate_request_type type)
|
|
{
|
|
struct emc_rate_request *req = &emc->requested_rate[type];
|
|
int ret;
|
|
|
|
mutex_lock(&emc->rate_lock);
|
|
ret = emc_request_rate(emc, rate, req->max_rate, type);
|
|
mutex_unlock(&emc->rate_lock);
|
|
|
|
return ret;
|
|
}
|
|
|
|
static int emc_set_max_rate(struct tegra_emc *emc, unsigned long rate,
|
|
enum emc_rate_request_type type)
|
|
{
|
|
struct emc_rate_request *req = &emc->requested_rate[type];
|
|
int ret;
|
|
|
|
mutex_lock(&emc->rate_lock);
|
|
ret = emc_request_rate(emc, req->min_rate, rate, type);
|
|
mutex_unlock(&emc->rate_lock);
|
|
|
|
return ret;
|
|
}
|
|
|
|
/*
|
|
* debugfs interface
|
|
*
|
|
* The memory controller driver exposes some files in debugfs that can be used
|
|
* to control the EMC frequency. The top-level directory can be found here:
|
|
*
|
|
* /sys/kernel/debug/emc
|
|
*
|
|
* It contains the following files:
|
|
*
|
|
* - available_rates: This file contains a list of valid, space-separated
|
|
* EMC frequencies.
|
|
*
|
|
* - min_rate: Writing a value to this file sets the given frequency as the
|
|
* floor of the permitted range. If this is higher than the currently
|
|
* configured EMC frequency, this will cause the frequency to be
|
|
* increased so that it stays within the valid range.
|
|
*
|
|
* - max_rate: Similarily to the min_rate file, writing a value to this file
|
|
* sets the given frequency as the ceiling of the permitted range. If
|
|
* the value is lower than the currently configured EMC frequency, this
|
|
* will cause the frequency to be decreased so that it stays within the
|
|
* valid range.
|
|
*/
|
|
|
|
static bool tegra_emc_validate_rate(struct tegra_emc *emc, unsigned long rate)
|
|
{
|
|
unsigned int i;
|
|
|
|
for (i = 0; i < emc->num_timings; i++)
|
|
if (rate == emc->timings[i].rate)
|
|
return true;
|
|
|
|
return false;
|
|
}
|
|
|
|
static int tegra_emc_debug_available_rates_show(struct seq_file *s, void *data)
|
|
{
|
|
struct tegra_emc *emc = s->private;
|
|
const char *prefix = "";
|
|
unsigned int i;
|
|
|
|
for (i = 0; i < emc->num_timings; i++) {
|
|
seq_printf(s, "%s%lu", prefix, emc->timings[i].rate);
|
|
prefix = " ";
|
|
}
|
|
|
|
seq_puts(s, "\n");
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int tegra_emc_debug_available_rates_open(struct inode *inode,
|
|
struct file *file)
|
|
{
|
|
return single_open(file, tegra_emc_debug_available_rates_show,
|
|
inode->i_private);
|
|
}
|
|
|
|
static const struct file_operations tegra_emc_debug_available_rates_fops = {
|
|
.open = tegra_emc_debug_available_rates_open,
|
|
.read = seq_read,
|
|
.llseek = seq_lseek,
|
|
.release = single_release,
|
|
};
|
|
|
|
static int tegra_emc_debug_min_rate_get(void *data, u64 *rate)
|
|
{
|
|
struct tegra_emc *emc = data;
|
|
|
|
*rate = emc->debugfs.min_rate;
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int tegra_emc_debug_min_rate_set(void *data, u64 rate)
|
|
{
|
|
struct tegra_emc *emc = data;
|
|
int err;
|
|
|
|
if (!tegra_emc_validate_rate(emc, rate))
|
|
return -EINVAL;
|
|
|
|
err = emc_set_min_rate(emc, rate, EMC_RATE_DEBUG);
|
|
if (err < 0)
|
|
return err;
|
|
|
|
emc->debugfs.min_rate = rate;
|
|
|
|
return 0;
|
|
}
|
|
|
|
DEFINE_SIMPLE_ATTRIBUTE(tegra_emc_debug_min_rate_fops,
|
|
tegra_emc_debug_min_rate_get,
|
|
tegra_emc_debug_min_rate_set, "%llu\n");
|
|
|
|
static int tegra_emc_debug_max_rate_get(void *data, u64 *rate)
|
|
{
|
|
struct tegra_emc *emc = data;
|
|
|
|
*rate = emc->debugfs.max_rate;
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int tegra_emc_debug_max_rate_set(void *data, u64 rate)
|
|
{
|
|
struct tegra_emc *emc = data;
|
|
int err;
|
|
|
|
if (!tegra_emc_validate_rate(emc, rate))
|
|
return -EINVAL;
|
|
|
|
err = emc_set_max_rate(emc, rate, EMC_RATE_DEBUG);
|
|
if (err < 0)
|
|
return err;
|
|
|
|
emc->debugfs.max_rate = rate;
|
|
|
|
return 0;
|
|
}
|
|
|
|
DEFINE_SIMPLE_ATTRIBUTE(tegra_emc_debug_max_rate_fops,
|
|
tegra_emc_debug_max_rate_get,
|
|
tegra_emc_debug_max_rate_set, "%llu\n");
|
|
|
|
static void tegra_emc_debugfs_init(struct tegra_emc *emc)
|
|
{
|
|
struct device *dev = emc->dev;
|
|
unsigned int i;
|
|
int err;
|
|
|
|
emc->debugfs.min_rate = ULONG_MAX;
|
|
emc->debugfs.max_rate = 0;
|
|
|
|
for (i = 0; i < emc->num_timings; i++) {
|
|
if (emc->timings[i].rate < emc->debugfs.min_rate)
|
|
emc->debugfs.min_rate = emc->timings[i].rate;
|
|
|
|
if (emc->timings[i].rate > emc->debugfs.max_rate)
|
|
emc->debugfs.max_rate = emc->timings[i].rate;
|
|
}
|
|
|
|
if (!emc->num_timings) {
|
|
emc->debugfs.min_rate = clk_get_rate(emc->clk);
|
|
emc->debugfs.max_rate = emc->debugfs.min_rate;
|
|
}
|
|
|
|
err = clk_set_rate_range(emc->clk, emc->debugfs.min_rate,
|
|
emc->debugfs.max_rate);
|
|
if (err < 0) {
|
|
dev_err(dev, "failed to set rate range [%lu-%lu] for %pC\n",
|
|
emc->debugfs.min_rate, emc->debugfs.max_rate,
|
|
emc->clk);
|
|
}
|
|
|
|
emc->debugfs.root = debugfs_create_dir("emc", NULL);
|
|
if (!emc->debugfs.root) {
|
|
dev_err(emc->dev, "failed to create debugfs directory\n");
|
|
return;
|
|
}
|
|
|
|
debugfs_create_file("available_rates", 0444, emc->debugfs.root,
|
|
emc, &tegra_emc_debug_available_rates_fops);
|
|
debugfs_create_file("min_rate", 0644, emc->debugfs.root,
|
|
emc, &tegra_emc_debug_min_rate_fops);
|
|
debugfs_create_file("max_rate", 0644, emc->debugfs.root,
|
|
emc, &tegra_emc_debug_max_rate_fops);
|
|
}
|
|
|
|
static inline struct tegra_emc *
|
|
to_tegra_emc_provider(struct icc_provider *provider)
|
|
{
|
|
return container_of(provider, struct tegra_emc, provider);
|
|
}
|
|
|
|
static struct icc_node_data *
|
|
emc_of_icc_xlate_extended(struct of_phandle_args *spec, void *data)
|
|
{
|
|
struct icc_provider *provider = data;
|
|
struct icc_node_data *ndata;
|
|
struct icc_node *node;
|
|
|
|
/* External Memory is the only possible ICC route */
|
|
list_for_each_entry(node, &provider->nodes, node_list) {
|
|
if (node->id != TEGRA_ICC_EMEM)
|
|
continue;
|
|
|
|
ndata = kzalloc(sizeof(*ndata), GFP_KERNEL);
|
|
if (!ndata)
|
|
return ERR_PTR(-ENOMEM);
|
|
|
|
/*
|
|
* SRC and DST nodes should have matching TAG in order to have
|
|
* it set by default for a requested path.
|
|
*/
|
|
ndata->tag = TEGRA_MC_ICC_TAG_ISO;
|
|
ndata->node = node;
|
|
|
|
return ndata;
|
|
}
|
|
|
|
return ERR_PTR(-EPROBE_DEFER);
|
|
}
|
|
|
|
static int emc_icc_set(struct icc_node *src, struct icc_node *dst)
|
|
{
|
|
struct tegra_emc *emc = to_tegra_emc_provider(dst->provider);
|
|
unsigned long long peak_bw = icc_units_to_bps(dst->peak_bw);
|
|
unsigned long long avg_bw = icc_units_to_bps(dst->avg_bw);
|
|
unsigned long long rate = max(avg_bw, peak_bw);
|
|
const unsigned int dram_data_bus_width_bytes = 4;
|
|
const unsigned int ddr = 2;
|
|
int err;
|
|
|
|
/*
|
|
* Tegra30 EMC runs on a clock rate of SDRAM bus. This means that
|
|
* EMC clock rate is twice smaller than the peak data rate because
|
|
* data is sampled on both EMC clock edges.
|
|
*/
|
|
do_div(rate, ddr * dram_data_bus_width_bytes);
|
|
rate = min_t(u64, rate, U32_MAX);
|
|
|
|
err = emc_set_min_rate(emc, rate, EMC_RATE_ICC);
|
|
if (err)
|
|
return err;
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int tegra_emc_interconnect_init(struct tegra_emc *emc)
|
|
{
|
|
const struct tegra_mc_soc *soc = emc->mc->soc;
|
|
struct icc_node *node;
|
|
int err;
|
|
|
|
emc->provider.dev = emc->dev;
|
|
emc->provider.set = emc_icc_set;
|
|
emc->provider.data = &emc->provider;
|
|
emc->provider.aggregate = soc->icc_ops->aggregate;
|
|
emc->provider.xlate_extended = emc_of_icc_xlate_extended;
|
|
|
|
err = icc_provider_add(&emc->provider);
|
|
if (err)
|
|
goto err_msg;
|
|
|
|
/* create External Memory Controller node */
|
|
node = icc_node_create(TEGRA_ICC_EMC);
|
|
if (IS_ERR(node)) {
|
|
err = PTR_ERR(node);
|
|
goto del_provider;
|
|
}
|
|
|
|
node->name = "External Memory Controller";
|
|
icc_node_add(node, &emc->provider);
|
|
|
|
/* link External Memory Controller to External Memory (DRAM) */
|
|
err = icc_link_create(node, TEGRA_ICC_EMEM);
|
|
if (err)
|
|
goto remove_nodes;
|
|
|
|
/* create External Memory node */
|
|
node = icc_node_create(TEGRA_ICC_EMEM);
|
|
if (IS_ERR(node)) {
|
|
err = PTR_ERR(node);
|
|
goto remove_nodes;
|
|
}
|
|
|
|
node->name = "External Memory (DRAM)";
|
|
icc_node_add(node, &emc->provider);
|
|
|
|
return 0;
|
|
|
|
remove_nodes:
|
|
icc_nodes_remove(&emc->provider);
|
|
del_provider:
|
|
icc_provider_del(&emc->provider);
|
|
err_msg:
|
|
dev_err(emc->dev, "failed to initialize ICC: %d\n", err);
|
|
|
|
return err;
|
|
}
|
|
|
|
static int tegra_emc_opp_table_init(struct tegra_emc *emc)
|
|
{
|
|
u32 hw_version = BIT(tegra_sku_info.soc_speedo_id);
|
|
struct opp_table *clk_opp_table, *hw_opp_table;
|
|
int err;
|
|
|
|
clk_opp_table = dev_pm_opp_set_clkname(emc->dev, NULL);
|
|
err = PTR_ERR_OR_ZERO(clk_opp_table);
|
|
if (err) {
|
|
dev_err(emc->dev, "failed to set OPP clk: %d\n", err);
|
|
return err;
|
|
}
|
|
|
|
hw_opp_table = dev_pm_opp_set_supported_hw(emc->dev, &hw_version, 1);
|
|
err = PTR_ERR_OR_ZERO(hw_opp_table);
|
|
if (err) {
|
|
dev_err(emc->dev, "failed to set OPP supported HW: %d\n", err);
|
|
goto put_clk_table;
|
|
}
|
|
|
|
err = dev_pm_opp_of_add_table(emc->dev);
|
|
if (err) {
|
|
if (err == -ENODEV)
|
|
dev_err(emc->dev, "OPP table not found, please update your device tree\n");
|
|
else
|
|
dev_err(emc->dev, "failed to add OPP table: %d\n", err);
|
|
|
|
goto put_hw_table;
|
|
}
|
|
|
|
dev_info(emc->dev, "OPP HW ver. 0x%x, current clock rate %lu MHz\n",
|
|
hw_version, clk_get_rate(emc->clk) / 1000000);
|
|
|
|
/* first dummy rate-set initializes voltage state */
|
|
err = dev_pm_opp_set_rate(emc->dev, clk_get_rate(emc->clk));
|
|
if (err) {
|
|
dev_err(emc->dev, "failed to initialize OPP clock: %d\n", err);
|
|
goto remove_table;
|
|
}
|
|
|
|
return 0;
|
|
|
|
remove_table:
|
|
dev_pm_opp_of_remove_table(emc->dev);
|
|
put_hw_table:
|
|
dev_pm_opp_put_supported_hw(hw_opp_table);
|
|
put_clk_table:
|
|
dev_pm_opp_put_clkname(clk_opp_table);
|
|
|
|
return err;
|
|
}
|
|
|
|
static void devm_tegra_emc_unset_callback(void *data)
|
|
{
|
|
tegra20_clk_set_emc_round_callback(NULL, NULL);
|
|
}
|
|
|
|
static void devm_tegra_emc_unreg_clk_notifier(void *data)
|
|
{
|
|
struct tegra_emc *emc = data;
|
|
|
|
clk_notifier_unregister(emc->clk, &emc->clk_nb);
|
|
}
|
|
|
|
static int tegra_emc_init_clk(struct tegra_emc *emc)
|
|
{
|
|
int err;
|
|
|
|
tegra20_clk_set_emc_round_callback(emc_round_rate, emc);
|
|
|
|
err = devm_add_action_or_reset(emc->dev, devm_tegra_emc_unset_callback,
|
|
NULL);
|
|
if (err)
|
|
return err;
|
|
|
|
emc->clk = devm_clk_get(emc->dev, NULL);
|
|
if (IS_ERR(emc->clk)) {
|
|
dev_err(emc->dev, "failed to get EMC clock: %pe\n", emc->clk);
|
|
return PTR_ERR(emc->clk);
|
|
}
|
|
|
|
err = clk_notifier_register(emc->clk, &emc->clk_nb);
|
|
if (err) {
|
|
dev_err(emc->dev, "failed to register clk notifier: %d\n", err);
|
|
return err;
|
|
}
|
|
|
|
err = devm_add_action_or_reset(emc->dev,
|
|
devm_tegra_emc_unreg_clk_notifier, emc);
|
|
if (err)
|
|
return err;
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int tegra_emc_probe(struct platform_device *pdev)
|
|
{
|
|
struct device_node *np;
|
|
struct tegra_emc *emc;
|
|
int err;
|
|
|
|
emc = devm_kzalloc(&pdev->dev, sizeof(*emc), GFP_KERNEL);
|
|
if (!emc)
|
|
return -ENOMEM;
|
|
|
|
emc->mc = devm_tegra_memory_controller_get(&pdev->dev);
|
|
if (IS_ERR(emc->mc))
|
|
return PTR_ERR(emc->mc);
|
|
|
|
mutex_init(&emc->rate_lock);
|
|
emc->clk_nb.notifier_call = emc_clk_change_notify;
|
|
emc->dev = &pdev->dev;
|
|
|
|
np = emc_find_node_by_ram_code(&pdev->dev);
|
|
if (np) {
|
|
err = emc_load_timings_from_dt(emc, np);
|
|
of_node_put(np);
|
|
if (err)
|
|
return err;
|
|
}
|
|
|
|
emc->regs = devm_platform_ioremap_resource(pdev, 0);
|
|
if (IS_ERR(emc->regs))
|
|
return PTR_ERR(emc->regs);
|
|
|
|
err = emc_setup_hw(emc);
|
|
if (err)
|
|
return err;
|
|
|
|
err = platform_get_irq(pdev, 0);
|
|
if (err < 0)
|
|
return err;
|
|
|
|
emc->irq = err;
|
|
|
|
err = devm_request_irq(&pdev->dev, emc->irq, tegra_emc_isr, 0,
|
|
dev_name(&pdev->dev), emc);
|
|
if (err) {
|
|
dev_err(&pdev->dev, "failed to request irq: %d\n", err);
|
|
return err;
|
|
}
|
|
|
|
err = tegra_emc_init_clk(emc);
|
|
if (err)
|
|
return err;
|
|
|
|
err = tegra_emc_opp_table_init(emc);
|
|
if (err)
|
|
return err;
|
|
|
|
platform_set_drvdata(pdev, emc);
|
|
tegra_emc_rate_requests_init(emc);
|
|
tegra_emc_debugfs_init(emc);
|
|
tegra_emc_interconnect_init(emc);
|
|
|
|
/*
|
|
* Don't allow the kernel module to be unloaded. Unloading adds some
|
|
* extra complexity which doesn't really worth the effort in a case of
|
|
* this driver.
|
|
*/
|
|
try_module_get(THIS_MODULE);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int tegra_emc_suspend(struct device *dev)
|
|
{
|
|
struct tegra_emc *emc = dev_get_drvdata(dev);
|
|
int err;
|
|
|
|
/* take exclusive control over the clock's rate */
|
|
err = clk_rate_exclusive_get(emc->clk);
|
|
if (err) {
|
|
dev_err(emc->dev, "failed to acquire clk: %d\n", err);
|
|
return err;
|
|
}
|
|
|
|
/* suspending in a bad state will hang machine */
|
|
if (WARN(emc->bad_state, "hardware in a bad state\n"))
|
|
return -EINVAL;
|
|
|
|
emc->bad_state = true;
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int tegra_emc_resume(struct device *dev)
|
|
{
|
|
struct tegra_emc *emc = dev_get_drvdata(dev);
|
|
|
|
emc_setup_hw(emc);
|
|
emc->bad_state = false;
|
|
|
|
clk_rate_exclusive_put(emc->clk);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static const struct dev_pm_ops tegra_emc_pm_ops = {
|
|
.suspend = tegra_emc_suspend,
|
|
.resume = tegra_emc_resume,
|
|
};
|
|
|
|
static const struct of_device_id tegra_emc_of_match[] = {
|
|
{ .compatible = "nvidia,tegra30-emc", },
|
|
{},
|
|
};
|
|
MODULE_DEVICE_TABLE(of, tegra_emc_of_match);
|
|
|
|
static struct platform_driver tegra_emc_driver = {
|
|
.probe = tegra_emc_probe,
|
|
.driver = {
|
|
.name = "tegra30-emc",
|
|
.of_match_table = tegra_emc_of_match,
|
|
.pm = &tegra_emc_pm_ops,
|
|
.suppress_bind_attrs = true,
|
|
.sync_state = icc_sync_state,
|
|
},
|
|
};
|
|
module_platform_driver(tegra_emc_driver);
|
|
|
|
MODULE_AUTHOR("Dmitry Osipenko <digetx@gmail.com>");
|
|
MODULE_DESCRIPTION("NVIDIA Tegra30 EMC driver");
|
|
MODULE_LICENSE("GPL v2");
|