UbiquitousOS
/
OpenCloudOS-Kernel
mirror of https://gitee.com/OpenCloudOS/OpenCloudOS-Kernel.git
11
0
Fork 0
Code Issues Projects Releases Wiki Activity
OpenCloudOS-Kernel/net/mac80211
History
Bob Copeland 8ffb5c001a mac80211: enable vif.cab_queue for mesh 
Since mesh powersaving was added, pending bcast/mcast frames may go out the
CAB queue now.  Unfortunately, the queue was only set up for AP mode, so we
would try to tx on the IEEE80211_INVAL_HW_QUEUE.  Allow cab_queue for mesh
interfaces as well.

Fixes the following warning (or crash without MAC80211_VERBOSE_DEBUG):

WARNING: at net/mac80211/tx.c:1223 __ieee80211_tx+0x162/0x35f [mac80211]()
Modules linked in: mac80211_hwsim mac80211 cfg80211 [...]
Pid: 3085, comm: avahi-daemon Tainted: G        W    3.8.0-rc1+ #377
Call Trace:
 [<ffffffff81045c20>] warn_slowpath_common+0x83/0x9c
 [<ffffffff81045c53>] warn_slowpath_null+0x1a/0x1c
 [<ffffffffa083aef0>] __ieee80211_tx+0x162/0x35f [mac80211]
 [<ffffffffa083cb1d>] ieee80211_tx+0xd3/0xf9 [mac80211]
 [<ffffffffa083cc0f>] ieee80211_xmit+0xcc/0xd5 [mac80211]
 [<ffffffffa083db59>] ieee80211_subif_start_xmit+0xc53/0xcd8 [mac80211]
 [<ffffffff81319acd>] dev_hard_start_xmit+0x259/0x3ce
 [<ffffffff81333d6b>] sch_direct_xmit+0x74/0x17d
 [<ffffffff8131a0b1>] dev_queue_xmit+0x230/0x414
 [<ffffffff8134877a>] ip_finish_output2+0x348/0x3aa
 [<ffffffff81349029>] ip_finish_output+0x6c/0x71
 [<ffffffff81349046>] NF_HOOK_COND.constprop.44+0x18/0x58
 [<ffffffff8134a03a>] ip_mc_output+0x134/0x13c
 [<ffffffff8134835a>] dst_output+0x18/0x1c
 [<ffffffff81349a24>] ip_local_out+0x20/0x24
 [<ffffffff8134a8cf>] ip_send_skb+0x16/0x3c
 [<ffffffff8136bfba>] udp_send_skb+0x254/0x2b9
 [<ffffffff8136c85e>] udp_sendmsg+0x5a8/0x7d4

Signed-off-by: Bob Copeland <bob@cozybit.com>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
 		2013-02-15 16:43:58 +01:00
..
Kconfig mac80211: mesh power save basics 2013-02-04 18:57:47 +01:00
Makefile mac80211: mesh power save basics 2013-02-04 18:57:47 +01:00
aes_ccm.c mac80211: use AES_BLOCK_SIZE 2011-07-08 11:11:24 -04:00
aes_ccm.h mac80211: use AES_BLOCK_SIZE 2011-07-08 11:11:24 -04:00
aes_cmac.c mac80211: include export.h in aes_cmac 2012-11-07 18:01:54 +01:00
aes_cmac.h mac80211: fix CMAC races 2011-07-08 11:11:20 -04:00
agg-rx.c mac80211: improve aggregation debug messages 2013-01-18 21:55:15 +01:00
agg-tx.c mac80211: fix aggregation state with current drivers 2013-01-24 15:43:51 +01:00
cfg.c mac80211: clean up mesh code 2013-02-15 15:46:37 +01:00
cfg.h
…
chan.c mac80211: add ieee80211_vif_change_bandwidth 2013-02-15 09:41:36 +01:00
debug.h mac80211: mesh power save basics 2013-02-04 18:57:47 +01:00
debugfs.c mac80211: remove IEEE80211_HW_SCAN_WHILE_IDLE 2013-02-11 18:45:01 +01:00
debugfs.h mac80211: use __printf attribute in debugfs 2012-10-18 09:01:57 +02:00
debugfs_key.c mac80211: add debug file for mic failure 2012-12-05 09:44:41 +01:00
debugfs_key.h mac80211: support separate default keys 2010-12-13 15:23:29 -05:00
debugfs_netdev.c mac80211: mesh power save basics 2013-02-04 18:57:47 +01:00
debugfs_netdev.h mac80211: reduce reliance on netdev 2009-12-21 18:38:52 -05:00
debugfs_sta.c mac80211: mesh power save basics 2013-02-04 18:57:47 +01:00
debugfs_sta.h
…
driver-ops.h mac80211: don't call bss_info_changed on p2p-device/monitor 2013-02-15 09:41:11 +01:00
event.c
…
ht.c mac80211: stop modifying HT SMPS capability 2013-02-15 09:41:41 +01:00
ibss.c mac80211: stop toggling IEEE80211_HT_CAP_SUP_WIDTH_20_40 2013-02-15 09:41:30 +01:00
ieee80211_i.h mac80211: cache mesh beacon 2013-02-15 09:41:40 +01:00
iface.c mac80211: enable vif.cab_queue for mesh 2013-02-15 16:43:58 +01:00
key.c mac80211: add op to configure default key id 2013-01-18 13:30:21 +01:00
key.h mac80211: add debug file for mic failure 2012-12-05 09:44:41 +01:00
led.c leds: Rename led_brightness_set() to led_set_brightness() 2012-07-24 07:52:34 +08:00
led.h mac80211: selective throughput LED trigger active 2010-12-22 14:33:37 -05:00
main.c mac80211: clean up mesh code 2013-02-15 15:46:37 +01:00
mesh.c mac80211: clean up mesh code 2013-02-15 15:46:37 +01:00
mesh.h mac80211: clean up mesh code 2013-02-15 15:46:37 +01:00
mesh_hwmp.c mac80211: clean up mesh code 2013-02-15 15:46:37 +01:00
mesh_pathtbl.c mac80211: clean up mesh code 2013-02-15 15:46:37 +01:00
mesh_plink.c mac80211: clean up mesh code 2013-02-15 15:46:37 +01:00
mesh_ps.c mac80211: consolidate MBSS change notification 2013-02-15 09:41:09 +01:00
mesh_sync.c mac80211: clean up mesh code 2013-02-15 15:46:37 +01:00
michael.c
…
michael.h
…
mlme.c mac80211: prevent spurious HT/VHT downgrade message 2013-02-15 09:41:45 +01:00
offchannel.c mac80211: Add flushes before going off-channel 2013-02-11 22:52:21 +01:00
pm.c mac80211: add radar detection command/event 2013-02-15 09:41:04 +01:00
rate.c mac80211: convert to channel definition struct 2012-11-26 12:42:59 +01:00
rate.h mac80211: track number of spatial streams 2013-02-15 09:41:31 +01:00
rc80211_minstrel.c mac80211/minstrel_ht: add support for using CCK rates 2013-02-13 10:56:33 +01:00
rc80211_minstrel.h mac80211/minstrel_ht: add support for using CCK rates 2013-02-13 10:56:33 +01:00
rc80211_minstrel_debugfs.c net: Add export.h for EXPORT_SYMBOL/THIS_MODULE to non-modules 2011-10-31 19:30:30 -04:00
rc80211_minstrel_ht.c mac80211: stop modifying HT SMPS capability 2013-02-15 09:41:41 +01:00
rc80211_minstrel_ht.h mac80211/minstrel_ht: add support for using CCK rates 2013-02-13 10:56:33 +01:00
rc80211_minstrel_ht_debugfs.c mac80211/minstrel_ht: add support for using CCK rates 2013-02-13 10:56:33 +01:00
rc80211_pid.h Fix common misspellings 2011-03-31 11:26:23 -03:00
rc80211_pid_algo.c net: fix assignment of 0/1 to bool variables. 2011-12-19 22:27:29 -05:00
rc80211_pid_debugfs.c net: Add export.h for EXPORT_SYMBOL/THIS_MODULE to non-modules 2011-10-31 19:30:30 -04:00
rx.c mac80211: clean up mesh code 2013-02-15 15:46:37 +01:00
scan.c mac80211: add radar detection command/event 2013-02-15 09:41:04 +01:00
spectmgmt.c mac80211: Remove unnecessary OOM logging messages 2011-09-13 15:45:02 -04:00
sta_info.c mac80211: stop modifying HT SMPS capability 2013-02-15 09:41:41 +01:00
sta_info.h mac80211: handle VHT operating mode notification 2013-02-15 09:41:32 +01:00
status.c mac80211: mesh power save basics 2013-02-04 18:57:47 +01:00
tkip.c mac80211: use spin_lock_bh() for TKIP lock 2013-02-15 09:41:13 +01:00
tkip.h mac80211: fix TKIP races, make API easier to use 2011-07-08 11:11:19 -04:00
trace.c mac80211: trace debug messages 2012-06-24 11:33:18 +02:00
trace.h mac80211: add radar detection command/event 2013-02-15 09:41:04 +01:00
tx.c mac80211: clean up mesh code 2013-02-15 15:46:37 +01:00
util.c mac80211: constify IE parsing 2013-02-15 09:41:39 +01:00
vht.c mac80211: constify IE parsing 2013-02-15 09:41:39 +01:00
wep.c mac80211: fix network header location when adding encryption headers 2012-05-16 12:47:43 -04:00
wep.h mac80211: move RX WEP weak IV counting 2012-03-13 14:54:16 -04:00
wme.c mac80211: mesh power save basics 2013-02-04 18:57:47 +01:00
wme.h mac80211: save wmm_acm per sdata 2012-06-20 17:35:22 +02:00
wpa.c mac80211: use spin_lock_bh() for TKIP lock 2013-02-15 09:41:13 +01:00
wpa.h mac80211: fix tx->skb NULL pointer dereference 2012-01-16 15:01:16 -05:00