OpenCloudOS-Kernel/drivers/net/wireless/iwlwifi/Kconfig

151 lines
4.8 KiB
Plaintext

config IWL4965
tristate "Intel Wireless WiFi 4965AGN"
depends on PCI && MAC80211 && WLAN_80211 && EXPERIMENTAL
select FW_LOADER
---help---
Select to build the driver supporting the:
Intel Wireless WiFi Link 4965AGN
This driver uses the kernel's mac80211 subsystem.
See <file:Documentation/networking/README.iwlwifi> for
information on the capabilities currently enabled in this
driver and for tips for debugging any issues or problems.
In order to use this driver, you will need a microcode (uCode)
image for it. You can obtain the microcode from:
<http://intellinuxwireless.org/>.
See the above referenced README.iwlwifi for information on where
to install the microcode images.
If you want to compile the driver as a module ( = code which can be
inserted in and remvoed from the running kernel whenever you want),
say M here and read <file:Documentation/kbuild/modules.txt>. The
module will be called iwl4965.ko.
config IWL4965_QOS
bool "Enable Wireless QoS in iwl4965 driver"
depends on IWL4965
---help---
This option will enable wireless quality of service (QoS) for the
iw4965 driver.
config IWL4965_HT
bool "Enable 802.11n HT features in iwl4965 driver"
depends on EXPERIMENTAL
depends on IWL4965 && IWL4965_QOS
depends on n
---help---
This option enables IEEE 802.11n High Throughput features
for the iwl4965 driver.
config IWL4965_SPECTRUM_MEASUREMENT
bool "Enable Spectrum Measurement in iw4965 driver"
depends on IWL4965
---help---
This option will enable spectrum measurement for the iwl4965 driver.
config IWL4965_SENSITIVITY
bool "Enable Sensitivity Calibration in iwl4965 driver"
depends on IWL4965
---help---
This option will enable sensitivity calibration for the iwl4965
driver.
config IWL4965_DEBUG
bool "Enable full debugging output in iwl4965 driver"
depends on IWL4965
---help---
This option will enable debug tracing output for the iwl4965
driver.
This will result in the kernel module being ~100k larger. You can
control which debug output is sent to the kernel log by setting the
value in
/sys/bus/pci/drivers/${DRIVER}/debug_level
This entry will only exist if this option is enabled.
To set a value, simply echo an 8-byte hex value to the same file:
% echo 0x43fff > /sys/bus/pci/drivers/${DRIVER}/debug_level
You can find the list of debug mask values in:
drivers/net/wireless/iwlwifi/iwl-4965-debug.h
If this is your first time using this driver, you should say Y here
as the debug information can assist others in helping you resolve
any problems you may encounter.
config IWL3945
tristate "Intel PRO/Wireless 3945ABG/BG Network Connection"
depends on PCI && MAC80211 && WLAN_80211 && EXPERIMENTAL
select FW_LOADER
---help---
Select to build the driver supporting the:
Intel PRO/Wireless 3945ABG/BG Network Connection
This driver uses the kernel's mac80211 subsystem.
See <file:Documentation/networking/README.iwlwifi> for
information on the capabilities currently enabled in this
driver and for tips for debugging any issues or problems.
In order to use this driver, you will need a microcode (uCode)
image for it. You can obtain the microcode from:
<http://intellinuxwireless.org/>.
See the above referenced README.iwlwifi for information on where
to install the microcode images.
If you want to compile the driver as a module ( = code which can be
inserted in and remvoed from the running kernel whenever you want),
say M here and read <file:Documentation/kbuild/modules.txt>. The
module will be called iwl3945.ko.
config IWL3945_QOS
bool "Enable Wireless QoS in iwl3945 driver"
depends on IWL3945
---help---
This option will enable wireless quality of service (QoS) for the
iwl3945 driver.
config IWL3945_SPECTRUM_MEASUREMENT
bool "Enable Spectrum Measurement in iwl3945 drivers"
depends on IWL3945
---help---
This option will enable spectrum measurement for the iwl3945 driver.
config IWL3945_DEBUG
bool "Enable full debugging output in iwl3945 driver"
depends on IWL3945
---help---
This option will enable debug tracing output for the iwl3945
driver.
This will result in the kernel module being ~100k larger. You can
control which debug output is sent to the kernel log by setting the
value in
/sys/bus/pci/drivers/${DRIVER}/debug_level
This entry will only exist if this option is enabled.
To set a value, simply echo an 8-byte hex value to the same file:
% echo 0x43fff > /sys/bus/pci/drivers/${DRIVER}/debug_level
You can find the list of debug mask values in:
drivers/net/wireless/iwlwifi/iwl-3945-debug.h
If this is your first time using this driver, you should say Y here
as the debug information can assist others in helping you resolve
any problems you may encounter.