UbiquitousOS
/
OpenCloudOS-Kernel
mirror of https://gitee.com/OpenCloudOS/OpenCloudOS-Kernel.git
11
0
Fork 0
Code Issues Projects Releases Wiki Activity
OpenCloudOS-Kernel/drivers/acpi/acpica/evgpeblk.c

526 lines
15 KiB
C
Raw Blame History

/******************************************************************************
*
* Module Name: evgpeblk - GPE block creation and initialization.
*
*****************************************************************************/
/*
* Copyright (C) 2000 - 2017, Intel Corp.
* All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
* are met:
* 1. Redistributions of source code must retain the above copyright
* notice, this list of conditions, and the following disclaimer,
* without modification.
* 2. Redistributions in binary form must reproduce at minimum a disclaimer
* substantially similar to the "NO WARRANTY" disclaimer below
* ("Disclaimer") and any redistribution must be conditioned upon
* including a substantially similar Disclaimer requirement for further
* binary redistribution.
* 3. Neither the names of the above-listed copyright holders nor the names
* of any contributors may be used to endorse or promote products derived
* from this software without specific prior written permission.
*
* Alternatively, this software may be distributed under the terms of the
* GNU General Public License ("GPL") version 2 as published by the Free
* Software Foundation.
*
* NO WARRANTY
* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
* "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
* LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTIBILITY AND FITNESS FOR
* A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
* HOLDERS OR CONTRIBUTORS BE LIABLE FOR SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
* DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
* OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
* HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
* STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING
* IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
* POSSIBILITY OF SUCH DAMAGES.
*/
#include <acpi/acpi.h>
#include "accommon.h"
#include "acevents.h"
#include "acnamesp.h"
#define _COMPONENT ACPI_EVENTS
ACPI_MODULE_NAME("evgpeblk")
#if (!ACPI_REDUCED_HARDWARE) /* Entire module */
/* Local prototypes */
static acpi_status
acpi_ev_install_gpe_block(struct acpi_gpe_block_info *gpe_block,
u32 interrupt_number);
static acpi_status
acpi_ev_create_gpe_info_blocks(struct acpi_gpe_block_info *gpe_block);
/*******************************************************************************
*
* FUNCTION: acpi_ev_install_gpe_block
*
* PARAMETERS: gpe_block - New GPE block
* interrupt_number - Xrupt to be associated with this
* GPE block
*
* RETURN: Status
*
* DESCRIPTION: Install new GPE block with mutex support
*
******************************************************************************/
static acpi_status
acpi_ev_install_gpe_block(struct acpi_gpe_block_info *gpe_block,
u32 interrupt_number)
{
struct acpi_gpe_block_info *next_gpe_block;
struct acpi_gpe_xrupt_info *gpe_xrupt_block;
acpi_status status;
acpi_cpu_flags flags;
ACPI_FUNCTION_TRACE(ev_install_gpe_block);
status = acpi_ut_acquire_mutex(ACPI_MTX_EVENTS);
if (ACPI_FAILURE(status)) {
return_ACPI_STATUS(status);
}
status =
acpi_ev_get_gpe_xrupt_block(interrupt_number, &gpe_xrupt_block);
if (ACPI_FAILURE(status)) {
goto unlock_and_exit;
}
/* Install the new block at the end of the list with lock */
flags = acpi_os_acquire_lock(acpi_gbl_gpe_lock);
if (gpe_xrupt_block->gpe_block_list_head) {
next_gpe_block = gpe_xrupt_block->gpe_block_list_head;
while (next_gpe_block->next) {
next_gpe_block = next_gpe_block->next;
}
next_gpe_block->next = gpe_block;
gpe_block->previous = next_gpe_block;
} else {
gpe_xrupt_block->gpe_block_list_head = gpe_block;
}
gpe_block->xrupt_block = gpe_xrupt_block;
acpi_os_release_lock(acpi_gbl_gpe_lock, flags);
unlock_and_exit:
(void)acpi_ut_release_mutex(ACPI_MTX_EVENTS);
return_ACPI_STATUS(status);
}
/*******************************************************************************
*
* FUNCTION: acpi_ev_delete_gpe_block
*
* PARAMETERS: gpe_block - Existing GPE block
*
* RETURN: Status
*
* DESCRIPTION: Remove a GPE block
*
******************************************************************************/
acpi_status acpi_ev_delete_gpe_block(struct acpi_gpe_block_info *gpe_block)
{
acpi_status status;
acpi_cpu_flags flags;
ACPI_FUNCTION_TRACE(ev_install_gpe_block);
status = acpi_ut_acquire_mutex(ACPI_MTX_EVENTS);
if (ACPI_FAILURE(status)) {
return_ACPI_STATUS(status);
}
/* Disable all GPEs in this block */
status =
acpi_hw_disable_gpe_block(gpe_block->xrupt_block, gpe_block, NULL);
if (!gpe_block->previous && !gpe_block->next) {
/* This is the last gpe_block on this interrupt */
status = acpi_ev_delete_gpe_xrupt(gpe_block->xrupt_block);
if (ACPI_FAILURE(status)) {
goto unlock_and_exit;
}
} else {
/* Remove the block on this interrupt with lock */
flags = acpi_os_acquire_lock(acpi_gbl_gpe_lock);
if (gpe_block->previous) {
gpe_block->previous->next = gpe_block->next;
} else {
gpe_block->xrupt_block->gpe_block_list_head =
gpe_block->next;
}
if (gpe_block->next) {
gpe_block->next->previous = gpe_block->previous;
}
acpi_os_release_lock(acpi_gbl_gpe_lock, flags);
}
acpi_current_gpe_count -= gpe_block->gpe_count;
/* Free the gpe_block */
ACPI_FREE(gpe_block->register_info);
ACPI_FREE(gpe_block->event_info);
ACPI_FREE(gpe_block);
unlock_and_exit:
status = acpi_ut_release_mutex(ACPI_MTX_EVENTS);
return_ACPI_STATUS(status);
}
/*******************************************************************************
*
* FUNCTION: acpi_ev_create_gpe_info_blocks
*
* PARAMETERS: gpe_block - New GPE block
*
* RETURN: Status
*
* DESCRIPTION: Create the register_info and event_info blocks for this GPE block
*
******************************************************************************/
static acpi_status
acpi_ev_create_gpe_info_blocks(struct acpi_gpe_block_info *gpe_block)
{
struct acpi_gpe_register_info *gpe_register_info = NULL;
struct acpi_gpe_event_info *gpe_event_info = NULL;
struct acpi_gpe_event_info *this_event;
struct acpi_gpe_register_info *this_register;
u32 i;
u32 j;
acpi_status status;
ACPI_FUNCTION_TRACE(ev_create_gpe_info_blocks);
/* Allocate the GPE register information block */
gpe_register_info = ACPI_ALLOCATE_ZEROED((acpi_size)gpe_block->
register_count *
sizeof(struct
acpi_gpe_register_info));
if (!gpe_register_info) {
ACPI_ERROR((AE_INFO,
"Could not allocate the GpeRegisterInfo table"));
return_ACPI_STATUS(AE_NO_MEMORY);
}
/*
* Allocate the GPE event_info block. There are eight distinct GPEs
* per register. Initialization to zeros is sufficient.
*/
gpe_event_info = ACPI_ALLOCATE_ZEROED((acpi_size)gpe_block->gpe_count *
sizeof(struct
acpi_gpe_event_info));
if (!gpe_event_info) {
ACPI_ERROR((AE_INFO,
"Could not allocate the GpeEventInfo table"));
status = AE_NO_MEMORY;
goto error_exit;
}
/* Save the new Info arrays in the GPE block */
gpe_block->register_info = gpe_register_info;
gpe_block->event_info = gpe_event_info;
/*
* Initialize the GPE Register and Event structures. A goal of these
* tables is to hide the fact that there are two separate GPE register
* sets in a given GPE hardware block, the status registers occupy the
* first half, and the enable registers occupy the second half.
*/
this_register = gpe_register_info;
this_event = gpe_event_info;
for (i = 0; i < gpe_block->register_count; i++) {
/* Init the register_info for this GPE register (8 GPEs) */
this_register->base_gpe_number = (u16)
(gpe_block->block_base_number +
(i * ACPI_GPE_REGISTER_WIDTH));
this_register->status_address.address = gpe_block->address + i;
this_register->enable_address.address =
gpe_block->address + i + gpe_block->register_count;
this_register->status_address.space_id = gpe_block->space_id;
this_register->enable_address.space_id = gpe_block->space_id;
this_register->status_address.bit_width =
ACPI_GPE_REGISTER_WIDTH;
this_register->enable_address.bit_width =
ACPI_GPE_REGISTER_WIDTH;
this_register->status_address.bit_offset = 0;
this_register->enable_address.bit_offset = 0;
/* Init the event_info for each GPE within this register */
for (j = 0; j < ACPI_GPE_REGISTER_WIDTH; j++) {
this_event->gpe_number =
(u8) (this_register->base_gpe_number + j);
this_event->register_info = this_register;
this_event++;
}
/* Disable all GPEs within this register */
status = acpi_hw_write(0x00, &this_register->enable_address);
if (ACPI_FAILURE(status)) {
goto error_exit;
}
/* Clear any pending GPE events within this register */
status = acpi_hw_write(0xFF, &this_register->status_address);
if (ACPI_FAILURE(status)) {
goto error_exit;
}
this_register++;
}
return_ACPI_STATUS(AE_OK);
error_exit:
if (gpe_register_info) {
ACPI_FREE(gpe_register_info);
}
if (gpe_event_info) {
ACPI_FREE(gpe_event_info);
}
return_ACPI_STATUS(status);
}
/*******************************************************************************
*
* FUNCTION: acpi_ev_create_gpe_block
*
* PARAMETERS: gpe_device - Handle to the parent GPE block
* gpe_block_address - Address and space_ID
* register_count - Number of GPE register pairs in the block
* gpe_block_base_number - Starting GPE number for the block
* interrupt_number - H/W interrupt for the block
* return_gpe_block - Where the new block descriptor is returned
*
* RETURN: Status
*
* DESCRIPTION: Create and Install a block of GPE registers. All GPEs within
* the block are disabled at exit.
* Note: Assumes namespace is locked.
*
******************************************************************************/
acpi_status
acpi_ev_create_gpe_block(struct acpi_namespace_node *gpe_device,
u64 address,
u8 space_id,
u32 register_count,
u16 gpe_block_base_number,
u32 interrupt_number,
struct acpi_gpe_block_info **return_gpe_block)
{
acpi_status status;
struct acpi_gpe_block_info *gpe_block;
struct acpi_gpe_walk_info walk_info;
ACPI_FUNCTION_TRACE(ev_create_gpe_block);
if (!register_count) {
return_ACPI_STATUS(AE_OK);
}
/* Allocate a new GPE block */
gpe_block = ACPI_ALLOCATE_ZEROED(sizeof(struct acpi_gpe_block_info));
if (!gpe_block) {
return_ACPI_STATUS(AE_NO_MEMORY);
}
/* Initialize the new GPE block */
gpe_block->address = address;
gpe_block->space_id = space_id;
gpe_block->node = gpe_device;
gpe_block->gpe_count = (u16)(register_count * ACPI_GPE_REGISTER_WIDTH);
gpe_block->initialized = FALSE;
gpe_block->register_count = register_count;
gpe_block->block_base_number = gpe_block_base_number;
/*
* Create the register_info and event_info sub-structures
* Note: disables and clears all GPEs in the block
*/
status = acpi_ev_create_gpe_info_blocks(gpe_block);
if (ACPI_FAILURE(status)) {
ACPI_FREE(gpe_block);
return_ACPI_STATUS(status);
}
/* Install the new block in the global lists */
status = acpi_ev_install_gpe_block(gpe_block, interrupt_number);
if (ACPI_FAILURE(status)) {
ACPI_FREE(gpe_block->register_info);
ACPI_FREE(gpe_block->event_info);
ACPI_FREE(gpe_block);
return_ACPI_STATUS(status);
}
acpi_gbl_all_gpes_initialized = FALSE;
/* Find all GPE methods (_Lxx or_Exx) for this block */
walk_info.gpe_block = gpe_block;
walk_info.gpe_device = gpe_device;
walk_info.execute_by_owner_id = FALSE;
status = acpi_ns_walk_namespace(ACPI_TYPE_METHOD, gpe_device,
ACPI_UINT32_MAX, ACPI_NS_WALK_NO_UNLOCK,
acpi_ev_match_gpe_method, NULL,
&walk_info, NULL);
/* Return the new block */
if (return_gpe_block) {
(*return_gpe_block) = gpe_block;
}
ACPI_DEBUG_PRINT_RAW((ACPI_DB_INIT,
" Initialized GPE %02X to %02X [%4.4s] %u regs on interrupt 0x%X%s\n",
(u32)gpe_block->block_base_number,
(u32)(gpe_block->block_base_number +
(gpe_block->gpe_count - 1)),
gpe_device->name.ascii, gpe_block->register_count,
interrupt_number,
interrupt_number ==
acpi_gbl_FADT.sci_interrupt ? " (SCI)" : ""));
/* Update global count of currently available GPEs */
acpi_current_gpe_count += gpe_block->gpe_count;
return_ACPI_STATUS(AE_OK);
}
/*******************************************************************************
*
* FUNCTION: acpi_ev_initialize_gpe_block
*
* PARAMETERS: acpi_gpe_callback
*
* RETURN: Status
*
* DESCRIPTION: Initialize and enable a GPE block. Enable GPEs that have
* associated methods.
* Note: Assumes namespace is locked.
*
******************************************************************************/
acpi_status
acpi_ev_initialize_gpe_block(struct acpi_gpe_xrupt_info *gpe_xrupt_info,
struct acpi_gpe_block_info *gpe_block,
void *ignored)
{
acpi_status status;
acpi_event_status event_status;
struct acpi_gpe_event_info *gpe_event_info;
u32 gpe_enabled_count;
u32 gpe_index;
u32 gpe_number;
u32 i;
u32 j;
ACPI_FUNCTION_TRACE(ev_initialize_gpe_block);
/*
* Ignore a null GPE block (e.g., if no GPE block 1 exists), and
* any GPE blocks that have been initialized already.
*/
if (!gpe_block || gpe_block->initialized) {
return_ACPI_STATUS(AE_OK);
}
/*
* Enable all GPEs that have a corresponding method and have the
* ACPI_GPE_CAN_WAKE flag unset. Any other GPEs within this block
* must be enabled via the acpi_enable_gpe() interface.
*/
gpe_enabled_count = 0;
for (i = 0; i < gpe_block->register_count; i++) {
for (j = 0; j < ACPI_GPE_REGISTER_WIDTH; j++) {
/* Get the info block for this particular GPE */
gpe_index = (i * ACPI_GPE_REGISTER_WIDTH) + j;
gpe_event_info = &gpe_block->event_info[gpe_index];
gpe_number = gpe_block->block_base_number + gpe_index;
/*
* Ignore GPEs that have no corresponding _Lxx/_Exx method
* and GPEs that are used for wakeup
*/
if ((ACPI_GPE_DISPATCH_TYPE(gpe_event_info->flags) !=
ACPI_GPE_DISPATCH_METHOD)
|| (gpe_event_info->flags & ACPI_GPE_CAN_WAKE)) {
continue;
}
event_status = 0;
(void)acpi_hw_get_gpe_status(gpe_event_info,
&event_status);
status = acpi_ev_add_gpe_reference(gpe_event_info);
if (ACPI_FAILURE(status)) {
ACPI_EXCEPTION((AE_INFO, status,
"Could not enable GPE 0x%02X",
gpe_number));
continue;
}
gpe_event_info->flags |= ACPI_GPE_AUTO_ENABLED;
if (event_status & ACPI_EVENT_FLAG_STATUS_SET) {
ACPI_INFO(("GPE 0x%02X active on init",
gpe_number));
(void)acpi_ev_gpe_dispatch(gpe_block->node,
gpe_event_info,
gpe_number);
}
gpe_enabled_count++;
}
}
if (gpe_enabled_count) {
ACPI_INFO(("Enabled %u GPEs in block %02X to %02X",
gpe_enabled_count, (u32)gpe_block->block_base_number,
(u32)(gpe_block->block_base_number +
(gpe_block->gpe_count - 1))));
}
gpe_block->initialized = TRUE;
return_ACPI_STATUS(AE_OK);
}
#endif /* !ACPI_REDUCED_HARDWARE */
Reference in New Issue View Git Blame Copy Permalink