OpenCloudOS-Kernel/drivers/char/agp/uninorth-agp.c

684 lines
17 KiB
C

/*
* UniNorth AGPGART routines.
*/
#include <linux/module.h>
#include <linux/pci.h>
#include <linux/init.h>
#include <linux/pagemap.h>
#include <linux/agp_backend.h>
#include <linux/delay.h>
#include <asm/uninorth.h>
#include <asm/pci-bridge.h>
#include <asm/prom.h>
#include <asm/pmac_feature.h>
#include "agp.h"
/*
* NOTES for uninorth3 (G5 AGP) supports :
*
* There maybe also possibility to have bigger cache line size for
* agp (see pmac_pci.c and look for cache line). Need to be investigated
* by someone.
*
* PAGE size are hardcoded but this may change, see asm/page.h.
*
* Jerome Glisse <j.glisse@gmail.com>
*/
static int uninorth_rev;
static int is_u3;
static int uninorth_fetch_size(void)
{
int i;
u32 temp;
struct aper_size_info_32 *values;
pci_read_config_dword(agp_bridge->dev, UNI_N_CFG_GART_BASE, &temp);
temp &= ~(0xfffff000);
values = A_SIZE_32(agp_bridge->driver->aperture_sizes);
for (i = 0; i < agp_bridge->driver->num_aperture_sizes; i++) {
if (temp == values[i].size_value) {
agp_bridge->previous_size =
agp_bridge->current_size = (void *) (values + i);
agp_bridge->aperture_size_idx = i;
return values[i].size;
}
}
agp_bridge->previous_size =
agp_bridge->current_size = (void *) (values + 1);
agp_bridge->aperture_size_idx = 1;
return values[1].size;
return 0;
}
static void uninorth_tlbflush(struct agp_memory *mem)
{
u32 ctrl = UNI_N_CFG_GART_ENABLE;
if (is_u3)
ctrl |= U3_N_CFG_GART_PERFRD;
pci_write_config_dword(agp_bridge->dev, UNI_N_CFG_GART_CTRL,
ctrl | UNI_N_CFG_GART_INVAL);
pci_write_config_dword(agp_bridge->dev, UNI_N_CFG_GART_CTRL, ctrl);
if (uninorth_rev <= 0x30) {
pci_write_config_dword(agp_bridge->dev, UNI_N_CFG_GART_CTRL,
ctrl | UNI_N_CFG_GART_2xRESET);
pci_write_config_dword(agp_bridge->dev, UNI_N_CFG_GART_CTRL,
ctrl);
}
}
static void uninorth_cleanup(void)
{
u32 tmp;
pci_read_config_dword(agp_bridge->dev, UNI_N_CFG_GART_CTRL, &tmp);
if (!(tmp & UNI_N_CFG_GART_ENABLE))
return;
tmp |= UNI_N_CFG_GART_INVAL;
pci_write_config_dword(agp_bridge->dev, UNI_N_CFG_GART_CTRL, tmp);
pci_write_config_dword(agp_bridge->dev, UNI_N_CFG_GART_CTRL, 0);
if (uninorth_rev <= 0x30) {
pci_write_config_dword(agp_bridge->dev, UNI_N_CFG_GART_CTRL,
UNI_N_CFG_GART_2xRESET);
pci_write_config_dword(agp_bridge->dev, UNI_N_CFG_GART_CTRL,
0);
}
}
static int uninorth_configure(void)
{
struct aper_size_info_32 *current_size;
current_size = A_SIZE_32(agp_bridge->current_size);
printk(KERN_INFO PFX "configuring for size idx: %d\n",
current_size->size_value);
/* aperture size and gatt addr */
pci_write_config_dword(agp_bridge->dev,
UNI_N_CFG_GART_BASE,
(agp_bridge->gatt_bus_addr & 0xfffff000)
| current_size->size_value);
/* HACK ALERT
* UniNorth seem to be buggy enough not to handle properly when
* the AGP aperture isn't mapped at bus physical address 0
*/
agp_bridge->gart_bus_addr = 0;
#ifdef CONFIG_PPC64
/* Assume U3 or later on PPC64 systems */
/* high 4 bits of GART physical address go in UNI_N_CFG_AGP_BASE */
pci_write_config_dword(agp_bridge->dev, UNI_N_CFG_AGP_BASE,
(agp_bridge->gatt_bus_addr >> 32) & 0xf);
#else
pci_write_config_dword(agp_bridge->dev,
UNI_N_CFG_AGP_BASE, agp_bridge->gart_bus_addr);
#endif
if (is_u3) {
pci_write_config_dword(agp_bridge->dev,
UNI_N_CFG_GART_DUMMY_PAGE,
agp_bridge->scratch_page_real >> 12);
}
return 0;
}
static int uninorth_insert_memory(struct agp_memory *mem, off_t pg_start,
int type)
{
int i, j, num_entries;
void *temp;
temp = agp_bridge->current_size;
num_entries = A_SIZE_32(temp)->num_entries;
if (type != 0 || mem->type != 0)
/* We know nothing of memory types */
return -EINVAL;
if ((pg_start + mem->page_count) > num_entries)
return -EINVAL;
j = pg_start;
while (j < (pg_start + mem->page_count)) {
if (agp_bridge->gatt_table[j])
return -EBUSY;
j++;
}
for (i = 0, j = pg_start; i < mem->page_count; i++, j++) {
agp_bridge->gatt_table[j] =
cpu_to_le32((mem->memory[i] & 0xFFFFF000UL) | 0x1UL);
flush_dcache_range((unsigned long)__va(mem->memory[i]),
(unsigned long)__va(mem->memory[i])+0x1000);
}
(void)in_le32((volatile u32*)&agp_bridge->gatt_table[pg_start]);
mb();
flush_dcache_range((unsigned long)&agp_bridge->gatt_table[pg_start],
(unsigned long)&agp_bridge->gatt_table[pg_start + mem->page_count]);
uninorth_tlbflush(mem);
return 0;
}
static int u3_insert_memory(struct agp_memory *mem, off_t pg_start, int type)
{
int i, num_entries;
void *temp;
u32 *gp;
temp = agp_bridge->current_size;
num_entries = A_SIZE_32(temp)->num_entries;
if (type != 0 || mem->type != 0)
/* We know nothing of memory types */
return -EINVAL;
if ((pg_start + mem->page_count) > num_entries)
return -EINVAL;
gp = (u32 *) &agp_bridge->gatt_table[pg_start];
for (i = 0; i < mem->page_count; ++i) {
if (gp[i]) {
printk("u3_insert_memory: entry 0x%x occupied (%x)\n",
i, gp[i]);
return -EBUSY;
}
}
for (i = 0; i < mem->page_count; i++) {
gp[i] = (mem->memory[i] >> PAGE_SHIFT) | 0x80000000UL;
flush_dcache_range((unsigned long)__va(mem->memory[i]),
(unsigned long)__va(mem->memory[i])+0x1000);
}
mb();
flush_dcache_range((unsigned long)gp, (unsigned long) &gp[i]);
uninorth_tlbflush(mem);
return 0;
}
int u3_remove_memory(struct agp_memory *mem, off_t pg_start, int type)
{
size_t i;
u32 *gp;
if (type != 0 || mem->type != 0)
/* We know nothing of memory types */
return -EINVAL;
gp = (u32 *) &agp_bridge->gatt_table[pg_start];
for (i = 0; i < mem->page_count; ++i)
gp[i] = 0;
mb();
flush_dcache_range((unsigned long)gp, (unsigned long) &gp[i]);
uninorth_tlbflush(mem);
return 0;
}
static void uninorth_agp_enable(struct agp_bridge_data *bridge, u32 mode)
{
u32 command, scratch, status;
int timeout;
pci_read_config_dword(bridge->dev,
bridge->capndx + PCI_AGP_STATUS,
&status);
command = agp_collect_device_status(bridge, mode, status);
command |= PCI_AGP_COMMAND_AGP;
if (uninorth_rev == 0x21) {
/*
* Darwin disable AGP 4x on this revision, thus we
* may assume it's broken. This is an AGP2 controller.
*/
command &= ~AGPSTAT2_4X;
}
if ((uninorth_rev >= 0x30) && (uninorth_rev <= 0x33)) {
/*
* We need to to set REQ_DEPTH to 7 for U3 versions 1.0, 2.1,
* 2.2 and 2.3, Darwin do so.
*/
if ((command >> AGPSTAT_RQ_DEPTH_SHIFT) > 7)
command = (command & ~AGPSTAT_RQ_DEPTH)
| (7 << AGPSTAT_RQ_DEPTH_SHIFT);
}
uninorth_tlbflush(NULL);
timeout = 0;
do {
pci_write_config_dword(bridge->dev,
bridge->capndx + PCI_AGP_COMMAND,
command);
pci_read_config_dword(bridge->dev,
bridge->capndx + PCI_AGP_COMMAND,
&scratch);
} while ((scratch & PCI_AGP_COMMAND_AGP) == 0 && ++timeout < 1000);
if ((scratch & PCI_AGP_COMMAND_AGP) == 0)
printk(KERN_ERR PFX "failed to write UniNorth AGP"
" command register\n");
if (uninorth_rev >= 0x30) {
/* This is an AGP V3 */
agp_device_command(command, (status & AGPSTAT_MODE_3_0));
} else {
/* AGP V2 */
agp_device_command(command, 0);
}
uninorth_tlbflush(NULL);
}
#ifdef CONFIG_PM
/*
* These Power Management routines are _not_ called by the normal PCI PM layer,
* but directly by the video driver through function pointers in the device
* tree.
*/
static int agp_uninorth_suspend(struct pci_dev *pdev)
{
struct agp_bridge_data *bridge;
u32 cmd;
u8 agp;
struct pci_dev *device = NULL;
bridge = agp_find_bridge(pdev);
if (bridge == NULL)
return -ENODEV;
/* Only one suspend supported */
if (bridge->dev_private_data)
return 0;
/* turn off AGP on the video chip, if it was enabled */
for_each_pci_dev(device) {
/* Don't touch the bridge yet, device first */
if (device == pdev)
continue;
/* Only deal with devices on the same bus here, no Mac has a P2P
* bridge on the AGP port, and mucking around the entire PCI
* tree is source of problems on some machines because of a bug
* in some versions of pci_find_capability() when hitting a dead
* device
*/
if (device->bus != pdev->bus)
continue;
agp = pci_find_capability(device, PCI_CAP_ID_AGP);
if (!agp)
continue;
pci_read_config_dword(device, agp + PCI_AGP_COMMAND, &cmd);
if (!(cmd & PCI_AGP_COMMAND_AGP))
continue;
printk("uninorth-agp: disabling AGP on device %s\n",
pci_name(device));
cmd &= ~PCI_AGP_COMMAND_AGP;
pci_write_config_dword(device, agp + PCI_AGP_COMMAND, cmd);
}
/* turn off AGP on the bridge */
agp = pci_find_capability(pdev, PCI_CAP_ID_AGP);
pci_read_config_dword(pdev, agp + PCI_AGP_COMMAND, &cmd);
bridge->dev_private_data = (void *)cmd;
if (cmd & PCI_AGP_COMMAND_AGP) {
printk("uninorth-agp: disabling AGP on bridge %s\n",
pci_name(pdev));
cmd &= ~PCI_AGP_COMMAND_AGP;
pci_write_config_dword(pdev, agp + PCI_AGP_COMMAND, cmd);
}
/* turn off the GART */
uninorth_cleanup();
return 0;
}
static int agp_uninorth_resume(struct pci_dev *pdev)
{
struct agp_bridge_data *bridge;
u32 command;
bridge = agp_find_bridge(pdev);
if (bridge == NULL)
return -ENODEV;
command = (u32)bridge->dev_private_data;
bridge->dev_private_data = NULL;
if (!(command & PCI_AGP_COMMAND_AGP))
return 0;
uninorth_agp_enable(bridge, command);
return 0;
}
#endif /* CONFIG_PM */
static int uninorth_create_gatt_table(struct agp_bridge_data *bridge)
{
char *table;
char *table_end;
int size;
int page_order;
int num_entries;
int i;
void *temp;
struct page *page;
/* We can't handle 2 level gatt's */
if (bridge->driver->size_type == LVL2_APER_SIZE)
return -EINVAL;
table = NULL;
i = bridge->aperture_size_idx;
temp = bridge->current_size;
size = page_order = num_entries = 0;
do {
size = A_SIZE_32(temp)->size;
page_order = A_SIZE_32(temp)->page_order;
num_entries = A_SIZE_32(temp)->num_entries;
table = (char *) __get_free_pages(GFP_KERNEL, page_order);
if (table == NULL) {
i++;
bridge->current_size = A_IDX32(bridge);
} else {
bridge->aperture_size_idx = i;
}
} while (!table && (i < bridge->driver->num_aperture_sizes));
if (table == NULL)
return -ENOMEM;
table_end = table + ((PAGE_SIZE * (1 << page_order)) - 1);
for (page = virt_to_page(table); page <= virt_to_page(table_end); page++)
SetPageReserved(page);
bridge->gatt_table_real = (u32 *) table;
bridge->gatt_table = (u32 *)table;
bridge->gatt_bus_addr = virt_to_gart(table);
for (i = 0; i < num_entries; i++)
bridge->gatt_table[i] = 0;
flush_dcache_range((unsigned long)table, (unsigned long)table_end);
return 0;
}
static int uninorth_free_gatt_table(struct agp_bridge_data *bridge)
{
int page_order;
char *table, *table_end;
void *temp;
struct page *page;
temp = bridge->current_size;
page_order = A_SIZE_32(temp)->page_order;
/* Do not worry about freeing memory, because if this is
* called, then all agp memory is deallocated and removed
* from the table.
*/
table = (char *) bridge->gatt_table_real;
table_end = table + ((PAGE_SIZE * (1 << page_order)) - 1);
for (page = virt_to_page(table); page <= virt_to_page(table_end); page++)
ClearPageReserved(page);
free_pages((unsigned long) bridge->gatt_table_real, page_order);
return 0;
}
void null_cache_flush(void)
{
mb();
}
/* Setup function */
static struct aper_size_info_32 uninorth_sizes[7] =
{
#if 0 /* Not sure uninorth supports that high aperture sizes */
{256, 65536, 6, 64},
{128, 32768, 5, 32},
{64, 16384, 4, 16},
#endif
{32, 8192, 3, 8},
{16, 4096, 2, 4},
{8, 2048, 1, 2},
{4, 1024, 0, 1}
};
/*
* Not sure that u3 supports that high aperture sizes but it
* would strange if it did not :)
*/
static struct aper_size_info_32 u3_sizes[8] =
{
{512, 131072, 7, 128},
{256, 65536, 6, 64},
{128, 32768, 5, 32},
{64, 16384, 4, 16},
{32, 8192, 3, 8},
{16, 4096, 2, 4},
{8, 2048, 1, 2},
{4, 1024, 0, 1}
};
struct agp_bridge_driver uninorth_agp_driver = {
.owner = THIS_MODULE,
.aperture_sizes = (void *)uninorth_sizes,
.size_type = U32_APER_SIZE,
.num_aperture_sizes = 4,
.configure = uninorth_configure,
.fetch_size = uninorth_fetch_size,
.cleanup = uninorth_cleanup,
.tlb_flush = uninorth_tlbflush,
.mask_memory = agp_generic_mask_memory,
.masks = NULL,
.cache_flush = null_cache_flush,
.agp_enable = uninorth_agp_enable,
.create_gatt_table = uninorth_create_gatt_table,
.free_gatt_table = uninorth_free_gatt_table,
.insert_memory = uninorth_insert_memory,
.remove_memory = agp_generic_remove_memory,
.alloc_by_type = agp_generic_alloc_by_type,
.free_by_type = agp_generic_free_by_type,
.agp_alloc_page = agp_generic_alloc_page,
.agp_destroy_page = agp_generic_destroy_page,
.cant_use_aperture = 1,
};
struct agp_bridge_driver u3_agp_driver = {
.owner = THIS_MODULE,
.aperture_sizes = (void *)u3_sizes,
.size_type = U32_APER_SIZE,
.num_aperture_sizes = 8,
.configure = uninorth_configure,
.fetch_size = uninorth_fetch_size,
.cleanup = uninorth_cleanup,
.tlb_flush = uninorth_tlbflush,
.mask_memory = agp_generic_mask_memory,
.masks = NULL,
.cache_flush = null_cache_flush,
.agp_enable = uninorth_agp_enable,
.create_gatt_table = uninorth_create_gatt_table,
.free_gatt_table = uninorth_free_gatt_table,
.insert_memory = u3_insert_memory,
.remove_memory = u3_remove_memory,
.alloc_by_type = agp_generic_alloc_by_type,
.free_by_type = agp_generic_free_by_type,
.agp_alloc_page = agp_generic_alloc_page,
.agp_destroy_page = agp_generic_destroy_page,
.cant_use_aperture = 1,
.needs_scratch_page = 1,
};
static struct agp_device_ids uninorth_agp_device_ids[] __devinitdata = {
{
.device_id = PCI_DEVICE_ID_APPLE_UNI_N_AGP,
.chipset_name = "UniNorth",
},
{
.device_id = PCI_DEVICE_ID_APPLE_UNI_N_AGP_P,
.chipset_name = "UniNorth/Pangea",
},
{
.device_id = PCI_DEVICE_ID_APPLE_UNI_N_AGP15,
.chipset_name = "UniNorth 1.5",
},
{
.device_id = PCI_DEVICE_ID_APPLE_UNI_N_AGP2,
.chipset_name = "UniNorth 2",
},
{
.device_id = PCI_DEVICE_ID_APPLE_U3_AGP,
.chipset_name = "U3",
},
{
.device_id = PCI_DEVICE_ID_APPLE_U3L_AGP,
.chipset_name = "U3L",
},
{
.device_id = PCI_DEVICE_ID_APPLE_U3H_AGP,
.chipset_name = "U3H",
},
};
static int __devinit agp_uninorth_probe(struct pci_dev *pdev,
const struct pci_device_id *ent)
{
struct agp_device_ids *devs = uninorth_agp_device_ids;
struct agp_bridge_data *bridge;
struct device_node *uninorth_node;
u8 cap_ptr;
int j;
cap_ptr = pci_find_capability(pdev, PCI_CAP_ID_AGP);
if (cap_ptr == 0)
return -ENODEV;
/* probe for known chipsets */
for (j = 0; devs[j].chipset_name != NULL; ++j) {
if (pdev->device == devs[j].device_id) {
printk(KERN_INFO PFX "Detected Apple %s chipset\n",
devs[j].chipset_name);
goto found;
}
}
printk(KERN_ERR PFX "Unsupported Apple chipset (device id: %04x).\n",
pdev->device);
return -ENODEV;
found:
/* Set revision to 0 if we could not read it. */
uninorth_rev = 0;
is_u3 = 0;
/* Locate core99 Uni-N */
uninorth_node = of_find_node_by_name(NULL, "uni-n");
/* Locate G5 u3 */
if (uninorth_node == NULL) {
is_u3 = 1;
uninorth_node = of_find_node_by_name(NULL, "u3");
}
if (uninorth_node) {
int *revprop = (int *)
get_property(uninorth_node, "device-rev", NULL);
if (revprop != NULL)
uninorth_rev = *revprop & 0x3f;
of_node_put(uninorth_node);
}
#ifdef CONFIG_PM
/* Inform platform of our suspend/resume caps */
pmac_register_agp_pm(pdev, agp_uninorth_suspend, agp_uninorth_resume);
#endif
/* Allocate & setup our driver */
bridge = agp_alloc_bridge();
if (!bridge)
return -ENOMEM;
if (is_u3)
bridge->driver = &u3_agp_driver;
else
bridge->driver = &uninorth_agp_driver;
bridge->dev = pdev;
bridge->capndx = cap_ptr;
bridge->flags = AGP_ERRATA_FASTWRITES;
/* Fill in the mode register */
pci_read_config_dword(pdev, cap_ptr+PCI_AGP_STATUS, &bridge->mode);
pci_set_drvdata(pdev, bridge);
return agp_add_bridge(bridge);
}
static void __devexit agp_uninorth_remove(struct pci_dev *pdev)
{
struct agp_bridge_data *bridge = pci_get_drvdata(pdev);
#ifdef CONFIG_PM
/* Inform platform of our suspend/resume caps */
pmac_register_agp_pm(pdev, NULL, NULL);
#endif
agp_remove_bridge(bridge);
agp_put_bridge(bridge);
}
static struct pci_device_id agp_uninorth_pci_table[] = {
{
.class = (PCI_CLASS_BRIDGE_HOST << 8),
.class_mask = ~0,
.vendor = PCI_VENDOR_ID_APPLE,
.device = PCI_ANY_ID,
.subvendor = PCI_ANY_ID,
.subdevice = PCI_ANY_ID,
},
{ }
};
MODULE_DEVICE_TABLE(pci, agp_uninorth_pci_table);
static struct pci_driver agp_uninorth_pci_driver = {
.name = "agpgart-uninorth",
.id_table = agp_uninorth_pci_table,
.probe = agp_uninorth_probe,
.remove = agp_uninorth_remove,
};
static int __init agp_uninorth_init(void)
{
if (agp_off)
return -EINVAL;
return pci_register_driver(&agp_uninorth_pci_driver);
}
static void __exit agp_uninorth_cleanup(void)
{
pci_unregister_driver(&agp_uninorth_pci_driver);
}
module_init(agp_uninorth_init);
module_exit(agp_uninorth_cleanup);
MODULE_AUTHOR("Ben Herrenschmidt & Paul Mackerras");
MODULE_LICENSE("GPL");