UbiquitousOS
/
OpenCloudOS-Kernel
mirror of https://gitee.com/OpenCloudOS/OpenCloudOS-Kernel.git
11
0
Fork 0
Code Issues Projects Releases Wiki Activity
OpenCloudOS-Kernel/drivers/regulator/max8973-regulator.c

829 lines
22 KiB
C
Raw Blame History

// SPDX-License-Identifier: GPL-2.0-only
/*
* max8973-regulator.c -- Maxim max8973A
*
* Regulator driver for MAXIM 8973A DC-DC step-down switching regulator.
*
* Copyright (c) 2012, NVIDIA Corporation.
*
* Author: Laxman Dewangan <ldewangan@nvidia.com>
*/
#include <linux/kernel.h>
#include <linux/module.h>
#include <linux/init.h>
#include <linux/err.h>
#include <linux/of.h>
#include <linux/of_device.h>
#include <linux/platform_device.h>
#include <linux/regulator/driver.h>
#include <linux/regulator/machine.h>
#include <linux/regulator/max8973-regulator.h>
#include <linux/regulator/of_regulator.h>
#include <linux/gpio.h>
#include <linux/gpio/consumer.h>
#include <linux/of_gpio.h>
#include <linux/i2c.h>
#include <linux/slab.h>
#include <linux/regmap.h>
#include <linux/thermal.h>
#include <linux/irq.h>
#include <linux/interrupt.h>
/* Register definitions */
#define MAX8973_VOUT 0x0
#define MAX8973_VOUT_DVS 0x1
#define MAX8973_CONTROL1 0x2
#define MAX8973_CONTROL2 0x3
#define MAX8973_CHIPID1 0x4
#define MAX8973_CHIPID2 0x5
#define MAX8973_MAX_VOUT_REG 2
/* MAX8973_VOUT */
#define MAX8973_VOUT_ENABLE BIT(7)
#define MAX8973_VOUT_MASK 0x7F
/* MAX8973_VOUT_DVS */
#define MAX8973_DVS_VOUT_MASK 0x7F
/* MAX8973_CONTROL1 */
#define MAX8973_SNS_ENABLE BIT(7)
#define MAX8973_FPWM_EN_M BIT(6)
#define MAX8973_NFSR_ENABLE BIT(5)
#define MAX8973_AD_ENABLE BIT(4)
#define MAX8973_BIAS_ENABLE BIT(3)
#define MAX8973_FREQSHIFT_9PER BIT(2)
#define MAX8973_RAMP_12mV_PER_US 0x0
#define MAX8973_RAMP_25mV_PER_US 0x1
#define MAX8973_RAMP_50mV_PER_US 0x2
#define MAX8973_RAMP_200mV_PER_US 0x3
#define MAX8973_RAMP_MASK 0x3
/* MAX8973_CONTROL2 */
#define MAX8973_WDTMR_ENABLE BIT(6)
#define MAX8973_DISCH_ENBABLE BIT(5)
#define MAX8973_FT_ENABLE BIT(4)
#define MAX77621_T_JUNCTION_120 BIT(7)
#define MAX8973_CKKADV_TRIP_MASK 0xC
#define MAX8973_CKKADV_TRIP_DISABLE 0xC
#define MAX8973_CKKADV_TRIP_75mV_PER_US 0x0
#define MAX8973_CKKADV_TRIP_150mV_PER_US 0x4
#define MAX8973_CKKADV_TRIP_75mV_PER_US_HIST_DIS 0x8
#define MAX8973_CONTROL_CLKADV_TRIP_MASK 0x00030000
#define MAX8973_INDUCTOR_MIN_30_PER 0x0
#define MAX8973_INDUCTOR_NOMINAL 0x1
#define MAX8973_INDUCTOR_PLUS_30_PER 0x2
#define MAX8973_INDUCTOR_PLUS_60_PER 0x3
#define MAX8973_CONTROL_INDUCTOR_VALUE_MASK 0x00300000
#define MAX8973_MIN_VOLATGE 606250
#define MAX8973_MAX_VOLATGE 1400000
#define MAX8973_VOLATGE_STEP 6250
#define MAX8973_BUCK_N_VOLTAGE 0x80
#define MAX77621_CHIPID_TJINT_S BIT(0)
#define MAX77621_NORMAL_OPERATING_TEMP 100000
#define MAX77621_TJINT_WARNING_TEMP_120 120000
#define MAX77621_TJINT_WARNING_TEMP_140 140000
enum device_id {
MAX8973,
MAX77621
};
/* Maxim 8973 chip information */
struct max8973_chip {
struct device *dev;
struct regulator_desc desc;
struct regmap *regmap;
bool enable_external_control;
int dvs_gpio;
int lru_index[MAX8973_MAX_VOUT_REG];
int curr_vout_val[MAX8973_MAX_VOUT_REG];
int curr_vout_reg;
int curr_gpio_val;
struct regulator_ops ops;
enum device_id id;
int junction_temp_warning;
int irq;
struct thermal_zone_device *tz_device;
};
/*
* find_voltage_set_register: Find new voltage configuration register (VOUT).
* The finding of the new VOUT register will be based on the LRU mechanism.
* Each VOUT register will have different voltage configured . This
* Function will look if any of the VOUT register have requested voltage set
* or not.
* - If it is already there then it will make that register as most
* recently used and return as found so that caller need not to set
* the VOUT register but need to set the proper gpios to select this
* VOUT register.
* - If requested voltage is not found then it will use the least
* recently mechanism to get new VOUT register for new configuration
* and will return not_found so that caller need to set new VOUT
* register and then gpios (both).
*/
static bool find_voltage_set_register(struct max8973_chip *tps,
int req_vsel, int *vout_reg, int *gpio_val)
{
int i;
bool found = false;
int new_vout_reg = tps->lru_index[MAX8973_MAX_VOUT_REG - 1];
int found_index = MAX8973_MAX_VOUT_REG - 1;
for (i = 0; i < MAX8973_MAX_VOUT_REG; ++i) {
if (tps->curr_vout_val[tps->lru_index[i]] == req_vsel) {
new_vout_reg = tps->lru_index[i];
found_index = i;
found = true;
goto update_lru_index;
}
}
update_lru_index:
for (i = found_index; i > 0; i--)
tps->lru_index[i] = tps->lru_index[i - 1];
tps->lru_index[0] = new_vout_reg;
*gpio_val = new_vout_reg;
*vout_reg = MAX8973_VOUT + new_vout_reg;
return found;
}
static int max8973_dcdc_get_voltage_sel(struct regulator_dev *rdev)
{
struct max8973_chip *max = rdev_get_drvdata(rdev);
unsigned int data;
int ret;
ret = regmap_read(max->regmap, max->curr_vout_reg, &data);
if (ret < 0) {
dev_err(max->dev, "register %d read failed, err = %d\n",
max->curr_vout_reg, ret);
return ret;
}
return data & MAX8973_VOUT_MASK;
}
static int max8973_dcdc_set_voltage_sel(struct regulator_dev *rdev,
unsigned vsel)
{
struct max8973_chip *max = rdev_get_drvdata(rdev);
int ret;
bool found = false;
int vout_reg = max->curr_vout_reg;
int gpio_val = max->curr_gpio_val;
/*
* If gpios are available to select the VOUT register then least
* recently used register for new configuration.
*/
if (gpio_is_valid(max->dvs_gpio))
found = find_voltage_set_register(max, vsel,
&vout_reg, &gpio_val);
if (!found) {
ret = regmap_update_bits(max->regmap, vout_reg,
MAX8973_VOUT_MASK, vsel);
if (ret < 0) {
dev_err(max->dev, "register %d update failed, err %d\n",
vout_reg, ret);
return ret;
}
max->curr_vout_reg = vout_reg;
max->curr_vout_val[gpio_val] = vsel;
}
/* Select proper VOUT register vio gpios */
if (gpio_is_valid(max->dvs_gpio)) {
gpio_set_value_cansleep(max->dvs_gpio, gpio_val & 0x1);
max->curr_gpio_val = gpio_val;
}
return 0;
}
static int max8973_dcdc_set_mode(struct regulator_dev *rdev, unsigned int mode)
{
struct max8973_chip *max = rdev_get_drvdata(rdev);
int ret;
int pwm;
/* Enable force PWM mode in FAST mode only. */
switch (mode) {
case REGULATOR_MODE_FAST:
pwm = MAX8973_FPWM_EN_M;
break;
case REGULATOR_MODE_NORMAL:
pwm = 0;
break;
default:
return -EINVAL;
}
ret = regmap_update_bits(max->regmap, MAX8973_CONTROL1,
MAX8973_FPWM_EN_M, pwm);
if (ret < 0)
dev_err(max->dev, "register %d update failed, err %d\n",
MAX8973_CONTROL1, ret);
return ret;
}
static unsigned int max8973_dcdc_get_mode(struct regulator_dev *rdev)
{
struct max8973_chip *max = rdev_get_drvdata(rdev);
unsigned int data;
int ret;
ret = regmap_read(max->regmap, MAX8973_CONTROL1, &data);
if (ret < 0) {
dev_err(max->dev, "register %d read failed, err %d\n",
MAX8973_CONTROL1, ret);
return ret;
}
return (data & MAX8973_FPWM_EN_M) ?
REGULATOR_MODE_FAST : REGULATOR_MODE_NORMAL;
}
static int max8973_set_current_limit(struct regulator_dev *rdev,
int min_ua, int max_ua)
{
struct max8973_chip *max = rdev_get_drvdata(rdev);
unsigned int val;
int ret;
if (max_ua <= 9000000)
val = MAX8973_CKKADV_TRIP_75mV_PER_US;
else if (max_ua <= 12000000)
val = MAX8973_CKKADV_TRIP_150mV_PER_US;
else
val = MAX8973_CKKADV_TRIP_DISABLE;
ret = regmap_update_bits(max->regmap, MAX8973_CONTROL2,
MAX8973_CKKADV_TRIP_MASK, val);
if (ret < 0) {
dev_err(max->dev, "register %d update failed: %d\n",
MAX8973_CONTROL2, ret);
return ret;
}
return 0;
}
static int max8973_get_current_limit(struct regulator_dev *rdev)
{
struct max8973_chip *max = rdev_get_drvdata(rdev);
unsigned int control2;
int ret;
ret = regmap_read(max->regmap, MAX8973_CONTROL2, &control2);
if (ret < 0) {
dev_err(max->dev, "register %d read failed: %d\n",
MAX8973_CONTROL2, ret);
return ret;
}
switch (control2 & MAX8973_CKKADV_TRIP_MASK) {
case MAX8973_CKKADV_TRIP_DISABLE:
return 15000000;
case MAX8973_CKKADV_TRIP_150mV_PER_US:
return 12000000;
case MAX8973_CKKADV_TRIP_75mV_PER_US:
return 9000000;
default:
break;
}
return 9000000;
}
static const unsigned int max8973_buck_ramp_table[] = {
12000, 25000, 50000, 200000
};
static const struct regulator_ops max8973_dcdc_ops = {
.get_voltage_sel = max8973_dcdc_get_voltage_sel,
.set_voltage_sel = max8973_dcdc_set_voltage_sel,
.list_voltage = regulator_list_voltage_linear,
.set_mode = max8973_dcdc_set_mode,
.get_mode = max8973_dcdc_get_mode,
.set_voltage_time_sel = regulator_set_voltage_time_sel,
.set_ramp_delay = regulator_set_ramp_delay_regmap,
};
static int max8973_init_dcdc(struct max8973_chip *max,
struct max8973_regulator_platform_data *pdata)
{
int ret;
uint8_t control1 = 0;
uint8_t control2 = 0;
unsigned int data;
ret = regmap_read(max->regmap, MAX8973_CONTROL1, &data);
if (ret < 0) {
dev_err(max->dev, "register %d read failed, err = %d",
MAX8973_CONTROL1, ret);
return ret;
}
control1 = data & MAX8973_RAMP_MASK;
switch (control1) {
case MAX8973_RAMP_12mV_PER_US:
max->desc.ramp_delay = 12000;
break;
case MAX8973_RAMP_25mV_PER_US:
max->desc.ramp_delay = 25000;
break;
case MAX8973_RAMP_50mV_PER_US:
max->desc.ramp_delay = 50000;
break;
case MAX8973_RAMP_200mV_PER_US:
max->desc.ramp_delay = 200000;
break;
}
if (pdata->control_flags & MAX8973_CONTROL_REMOTE_SENSE_ENABLE)
control1 |= MAX8973_SNS_ENABLE;
if (!(pdata->control_flags & MAX8973_CONTROL_FALLING_SLEW_RATE_ENABLE))
control1 |= MAX8973_NFSR_ENABLE;
if (pdata->control_flags & MAX8973_CONTROL_OUTPUT_ACTIVE_DISCH_ENABLE)
control1 |= MAX8973_AD_ENABLE;
if (pdata->control_flags & MAX8973_CONTROL_BIAS_ENABLE) {
control1 |= MAX8973_BIAS_ENABLE;
max->desc.enable_time = 20;
} else {
max->desc.enable_time = 240;
}
if (pdata->control_flags & MAX8973_CONTROL_FREQ_SHIFT_9PER_ENABLE)
control1 |= MAX8973_FREQSHIFT_9PER;
if ((pdata->junction_temp_warning == MAX77621_TJINT_WARNING_TEMP_120) &&
(max->id == MAX77621))
control2 |= MAX77621_T_JUNCTION_120;
if (!(pdata->control_flags & MAX8973_CONTROL_PULL_DOWN_ENABLE))
control2 |= MAX8973_DISCH_ENBABLE;
/* Clock advance trip configuration */
switch (pdata->control_flags & MAX8973_CONTROL_CLKADV_TRIP_MASK) {
case MAX8973_CONTROL_CLKADV_TRIP_DISABLED:
control2 |= MAX8973_CKKADV_TRIP_DISABLE;
break;
case MAX8973_CONTROL_CLKADV_TRIP_75mV_PER_US:
control2 |= MAX8973_CKKADV_TRIP_75mV_PER_US;
break;
case MAX8973_CONTROL_CLKADV_TRIP_150mV_PER_US:
control2 |= MAX8973_CKKADV_TRIP_150mV_PER_US;
break;
case MAX8973_CONTROL_CLKADV_TRIP_75mV_PER_US_HIST_DIS:
control2 |= MAX8973_CKKADV_TRIP_75mV_PER_US_HIST_DIS;
break;
}
/* Configure inductor value */
switch (pdata->control_flags & MAX8973_CONTROL_INDUCTOR_VALUE_MASK) {
case MAX8973_CONTROL_INDUCTOR_VALUE_NOMINAL:
control2 |= MAX8973_INDUCTOR_NOMINAL;
break;
case MAX8973_CONTROL_INDUCTOR_VALUE_MINUS_30_PER:
control2 |= MAX8973_INDUCTOR_MIN_30_PER;
break;
case MAX8973_CONTROL_INDUCTOR_VALUE_PLUS_30_PER:
control2 |= MAX8973_INDUCTOR_PLUS_30_PER;
break;
case MAX8973_CONTROL_INDUCTOR_VALUE_PLUS_60_PER:
control2 |= MAX8973_INDUCTOR_PLUS_60_PER;
break;
}
ret = regmap_write(max->regmap, MAX8973_CONTROL1, control1);
if (ret < 0) {
dev_err(max->dev, "register %d write failed, err = %d",
MAX8973_CONTROL1, ret);
return ret;
}
ret = regmap_write(max->regmap, MAX8973_CONTROL2, control2);
if (ret < 0) {
dev_err(max->dev, "register %d write failed, err = %d",
MAX8973_CONTROL2, ret);
return ret;
}
/* If external control is enabled then disable EN bit */
if (max->enable_external_control && (max->id == MAX8973)) {
ret = regmap_update_bits(max->regmap, MAX8973_VOUT,
MAX8973_VOUT_ENABLE, 0);
if (ret < 0)
dev_err(max->dev, "register %d update failed, err = %d",
MAX8973_VOUT, ret);
}
return ret;
}
static int max8973_thermal_read_temp(struct thermal_zone_device *tz, int *temp)
{
struct max8973_chip *mchip = thermal_zone_device_priv(tz);
unsigned int val;
int ret;
ret = regmap_read(mchip->regmap, MAX8973_CHIPID1, &val);
if (ret < 0) {
dev_err(mchip->dev, "Failed to read register CHIPID1, %d", ret);
return ret;
}
/* +1 degC to trigger cool device */
if (val & MAX77621_CHIPID_TJINT_S)
*temp = mchip->junction_temp_warning + 1000;
else
*temp = MAX77621_NORMAL_OPERATING_TEMP;
return 0;
}
static irqreturn_t max8973_thermal_irq(int irq, void *data)
{
struct max8973_chip *mchip = data;
thermal_zone_device_update(mchip->tz_device,
THERMAL_EVENT_UNSPECIFIED);
return IRQ_HANDLED;
}
static const struct thermal_zone_device_ops max77621_tz_ops = {
.get_temp = max8973_thermal_read_temp,
};
static int max8973_thermal_init(struct max8973_chip *mchip)
{
struct thermal_zone_device *tzd;
struct irq_data *irq_data;
unsigned long irq_flags = 0;
int ret;
if (mchip->id != MAX77621)
return 0;
tzd = devm_thermal_of_zone_register(mchip->dev, 0, mchip,
&max77621_tz_ops);
if (IS_ERR(tzd)) {
ret = PTR_ERR(tzd);
dev_err(mchip->dev, "Failed to register thermal sensor: %d\n",
ret);
return ret;
}
if (mchip->irq <= 0)
return 0;
irq_data = irq_get_irq_data(mchip->irq);
if (irq_data)
irq_flags = irqd_get_trigger_type(irq_data);
ret = devm_request_threaded_irq(mchip->dev, mchip->irq, NULL,
max8973_thermal_irq,
IRQF_ONESHOT | IRQF_SHARED | irq_flags,
dev_name(mchip->dev), mchip);
if (ret < 0) {
dev_err(mchip->dev, "Failed to request irq %d, %d\n",
mchip->irq, ret);
return ret;
}
return 0;
}
static const struct regmap_config max8973_regmap_config = {
.reg_bits = 8,
.val_bits = 8,
.max_register = MAX8973_CHIPID2,
.cache_type = REGCACHE_RBTREE,
};
static struct max8973_regulator_platform_data *max8973_parse_dt(
struct device *dev)
{
struct max8973_regulator_platform_data *pdata;
struct device_node *np = dev->of_node;
int ret;
u32 pval;
bool etr_enable;
bool etr_sensitivity_high;
pdata = devm_kzalloc(dev, sizeof(*pdata), GFP_KERNEL);
if (!pdata)
return NULL;
pdata->enable_ext_control = of_property_read_bool(np,
"maxim,externally-enable");
pdata->dvs_gpio = of_get_named_gpio(np, "maxim,dvs-gpio", 0);
ret = of_property_read_u32(np, "maxim,dvs-default-state", &pval);
if (!ret)
pdata->dvs_def_state = pval;
if (of_property_read_bool(np, "maxim,enable-remote-sense"))
pdata->control_flags |= MAX8973_CONTROL_REMOTE_SENSE_ENABLE;
if (of_property_read_bool(np, "maxim,enable-falling-slew-rate"))
pdata->control_flags |=
MAX8973_CONTROL_FALLING_SLEW_RATE_ENABLE;
if (of_property_read_bool(np, "maxim,enable-active-discharge"))
pdata->control_flags |=
MAX8973_CONTROL_OUTPUT_ACTIVE_DISCH_ENABLE;
if (of_property_read_bool(np, "maxim,enable-frequency-shift"))
pdata->control_flags |= MAX8973_CONTROL_FREQ_SHIFT_9PER_ENABLE;
if (of_property_read_bool(np, "maxim,enable-bias-control"))
pdata->control_flags |= MAX8973_CONTROL_BIAS_ENABLE;
etr_enable = of_property_read_bool(np, "maxim,enable-etr");
etr_sensitivity_high = of_property_read_bool(np,
"maxim,enable-high-etr-sensitivity");
if (etr_sensitivity_high)
etr_enable = true;
if (etr_enable) {
if (etr_sensitivity_high)
pdata->control_flags |=
MAX8973_CONTROL_CLKADV_TRIP_75mV_PER_US;
else
pdata->control_flags |=
MAX8973_CONTROL_CLKADV_TRIP_150mV_PER_US;
} else {
pdata->control_flags |= MAX8973_CONTROL_CLKADV_TRIP_DISABLED;
}
pdata->junction_temp_warning = MAX77621_TJINT_WARNING_TEMP_140;
ret = of_property_read_u32(np, "junction-warn-millicelsius", &pval);
if (!ret && (pval <= MAX77621_TJINT_WARNING_TEMP_120))
pdata->junction_temp_warning = MAX77621_TJINT_WARNING_TEMP_120;
return pdata;
}
static const struct of_device_id of_max8973_match_tbl[] = {
{ .compatible = "maxim,max8973", .data = (void *)MAX8973, },
{ .compatible = "maxim,max77621", .data = (void *)MAX77621, },
{ },
};
MODULE_DEVICE_TABLE(of, of_max8973_match_tbl);
static int max8973_probe(struct i2c_client *client)
{
const struct i2c_device_id *id = i2c_client_get_device_id(client);
struct max8973_regulator_platform_data *pdata;
struct regulator_init_data *ridata;
struct regulator_config config = { };
struct regulator_dev *rdev;
struct max8973_chip *max;
bool pdata_from_dt = false;
unsigned int chip_id;
struct gpio_desc *gpiod;
enum gpiod_flags gflags;
int ret;
pdata = dev_get_platdata(&client->dev);
if (!pdata && client->dev.of_node) {
pdata = max8973_parse_dt(&client->dev);
pdata_from_dt = true;
}
if (!pdata) {
dev_err(&client->dev, "No Platform data");
return -EIO;
}
if (pdata->dvs_gpio == -EPROBE_DEFER)
return -EPROBE_DEFER;
max = devm_kzalloc(&client->dev, sizeof(*max), GFP_KERNEL);
if (!max)
return -ENOMEM;
max->regmap = devm_regmap_init_i2c(client, &max8973_regmap_config);
if (IS_ERR(max->regmap)) {
ret = PTR_ERR(max->regmap);
dev_err(&client->dev, "regmap init failed, err %d\n", ret);
return ret;
}
if (client->dev.of_node) {
const struct of_device_id *match;
match = of_match_device(of_match_ptr(of_max8973_match_tbl),
&client->dev);
if (!match)
return -ENODATA;
max->id = (u32)((uintptr_t)match->data);
} else {
max->id = id->driver_data;
}
ret = regmap_read(max->regmap, MAX8973_CHIPID1, &chip_id);
if (ret < 0) {
dev_err(&client->dev, "register CHIPID1 read failed, %d", ret);
return ret;
}
dev_info(&client->dev, "CHIP-ID OTP: 0x%02x ID_M: 0x%02x\n",
(chip_id >> 4) & 0xF, (chip_id >> 1) & 0x7);
i2c_set_clientdata(client, max);
max->ops = max8973_dcdc_ops;
max->dev = &client->dev;
max->desc.name = id->name;
max->desc.id = 0;
max->desc.ops = &max->ops;
max->desc.type = REGULATOR_VOLTAGE;
max->desc.owner = THIS_MODULE;
max->desc.min_uV = MAX8973_MIN_VOLATGE;
max->desc.uV_step = MAX8973_VOLATGE_STEP;
max->desc.n_voltages = MAX8973_BUCK_N_VOLTAGE;
max->desc.ramp_reg = MAX8973_CONTROL1;
max->desc.ramp_mask = MAX8973_RAMP_MASK;
max->desc.ramp_delay_table = max8973_buck_ramp_table;
max->desc.n_ramp_values = ARRAY_SIZE(max8973_buck_ramp_table);
max->dvs_gpio = (pdata->dvs_gpio) ? pdata->dvs_gpio : -EINVAL;
max->enable_external_control = pdata->enable_ext_control;
max->curr_gpio_val = pdata->dvs_def_state;
max->curr_vout_reg = MAX8973_VOUT + pdata->dvs_def_state;
max->junction_temp_warning = pdata->junction_temp_warning;
max->lru_index[0] = max->curr_vout_reg;
if (gpio_is_valid(max->dvs_gpio)) {
int gpio_flags;
int i;
gpio_flags = (pdata->dvs_def_state) ?
GPIOF_OUT_INIT_HIGH : GPIOF_OUT_INIT_LOW;
ret = devm_gpio_request_one(&client->dev, max->dvs_gpio,
gpio_flags, "max8973-dvs");
if (ret) {
dev_err(&client->dev,
"gpio_request for gpio %d failed, err = %d\n",
max->dvs_gpio, ret);
return ret;
}
/*
* Initialize the lru index with vout_reg id
* The index 0 will be most recently used and
* set with the max->curr_vout_reg */
for (i = 0; i < MAX8973_MAX_VOUT_REG; ++i)
max->lru_index[i] = i;
max->lru_index[0] = max->curr_vout_reg;
max->lru_index[max->curr_vout_reg] = 0;
} else {
/*
* If there is no DVS GPIO, the VOUT register
* address is fixed.
*/
max->ops.set_voltage_sel = regulator_set_voltage_sel_regmap;
max->ops.get_voltage_sel = regulator_get_voltage_sel_regmap;
max->desc.vsel_reg = max->curr_vout_reg;
max->desc.vsel_mask = MAX8973_VOUT_MASK;
}
if (pdata_from_dt)
pdata->reg_init_data = of_get_regulator_init_data(&client->dev,
client->dev.of_node, &max->desc);
ridata = pdata->reg_init_data;
switch (max->id) {
case MAX8973:
if (!pdata->enable_ext_control) {
max->desc.enable_reg = MAX8973_VOUT;
max->desc.enable_mask = MAX8973_VOUT_ENABLE;
max->ops.enable = regulator_enable_regmap;
max->ops.disable = regulator_disable_regmap;
max->ops.is_enabled = regulator_is_enabled_regmap;
break;
}
if (ridata && (ridata->constraints.always_on ||
ridata->constraints.boot_on))
gflags = GPIOD_OUT_HIGH;
else
gflags = GPIOD_OUT_LOW;
gflags |= GPIOD_FLAGS_BIT_NONEXCLUSIVE;
gpiod = devm_gpiod_get_optional(&client->dev,
"maxim,enable",
gflags);
if (IS_ERR(gpiod))
return PTR_ERR(gpiod);
if (gpiod) {
config.ena_gpiod = gpiod;
max->enable_external_control = true;
}
break;
case MAX77621:
/*
* We do not let the core switch this regulator on/off,
* we just leave it on.
*/
gpiod = devm_gpiod_get_optional(&client->dev,
"maxim,enable",
GPIOD_OUT_HIGH);
if (IS_ERR(gpiod))
return PTR_ERR(gpiod);
if (gpiod)
max->enable_external_control = true;
max->desc.enable_reg = MAX8973_VOUT;
max->desc.enable_mask = MAX8973_VOUT_ENABLE;
max->ops.enable = regulator_enable_regmap;
max->ops.disable = regulator_disable_regmap;
max->ops.is_enabled = regulator_is_enabled_regmap;
max->ops.set_current_limit = max8973_set_current_limit;
max->ops.get_current_limit = max8973_get_current_limit;
break;
default:
break;
}
ret = max8973_init_dcdc(max, pdata);
if (ret < 0) {
dev_err(max->dev, "Max8973 Init failed, err = %d\n", ret);
return ret;
}
config.dev = &client->dev;
config.init_data = pdata->reg_init_data;
config.driver_data = max;
config.of_node = client->dev.of_node;
config.regmap = max->regmap;
/*
* Register the regulators
* Turn the GPIO descriptor over to the regulator core for
* lifecycle management if we pass an ena_gpiod.
*/
if (config.ena_gpiod)
devm_gpiod_unhinge(&client->dev, config.ena_gpiod);
rdev = devm_regulator_register(&client->dev, &max->desc, &config);
if (IS_ERR(rdev)) {
ret = PTR_ERR(rdev);
dev_err(max->dev, "regulator register failed, err %d\n", ret);
return ret;
}
max8973_thermal_init(max);
return 0;
}
static const struct i2c_device_id max8973_id[] = {
{.name = "max8973", .driver_data = MAX8973},
{.name = "max77621", .driver_data = MAX77621},
{},
};
MODULE_DEVICE_TABLE(i2c, max8973_id);
static struct i2c_driver max8973_i2c_driver = {
.driver = {
.name = "max8973",
.probe_type = PROBE_PREFER_ASYNCHRONOUS,
.of_match_table = of_max8973_match_tbl,
},
.probe = max8973_probe,
.id_table = max8973_id,
};
static int __init max8973_init(void)
{
return i2c_add_driver(&max8973_i2c_driver);
}
subsys_initcall(max8973_init);
static void __exit max8973_cleanup(void)
{
i2c_del_driver(&max8973_i2c_driver);
}
module_exit(max8973_cleanup);
MODULE_AUTHOR("Laxman Dewangan <ldewangan@nvidia.com>");
MODULE_DESCRIPTION("MAX8973 voltage regulator driver");
MODULE_LICENSE("GPL v2");
Reference in New Issue View Git Blame Copy Permalink