233 lines
5.7 KiB
C
233 lines
5.7 KiB
C
/*
|
|
* Gemini gpiochip and interrupt routines
|
|
*
|
|
* Copyright (C) 2008-2009 Paulius Zaleckas <paulius.zaleckas@teltonika.lt>
|
|
*
|
|
* Based on plat-mxc/gpio.c:
|
|
* MXC GPIO support. (c) 2008 Daniel Mack <daniel@caiaq.de>
|
|
* Copyright 2008 Juergen Beisert, kernel@pengutronix.de
|
|
*
|
|
* This program is free software; you can redistribute it and/or modify
|
|
* it under the terms of the GNU General Public License as published by
|
|
* the Free Software Foundation; either version 2 of the License, or
|
|
* (at your option) any later version.
|
|
*/
|
|
|
|
#include <linux/kernel.h>
|
|
#include <linux/init.h>
|
|
#include <linux/io.h>
|
|
#include <linux/irq.h>
|
|
#include <linux/gpio.h>
|
|
|
|
#include <mach/hardware.h>
|
|
#include <mach/irqs.h>
|
|
|
|
#define GPIO_BASE(x) IO_ADDRESS(GEMINI_GPIO_BASE(x))
|
|
|
|
/* GPIO registers definition */
|
|
#define GPIO_DATA_OUT 0x0
|
|
#define GPIO_DATA_IN 0x4
|
|
#define GPIO_DIR 0x8
|
|
#define GPIO_DATA_SET 0x10
|
|
#define GPIO_DATA_CLR 0x14
|
|
#define GPIO_PULL_EN 0x18
|
|
#define GPIO_PULL_TYPE 0x1C
|
|
#define GPIO_INT_EN 0x20
|
|
#define GPIO_INT_STAT 0x24
|
|
#define GPIO_INT_MASK 0x2C
|
|
#define GPIO_INT_CLR 0x30
|
|
#define GPIO_INT_TYPE 0x34
|
|
#define GPIO_INT_BOTH_EDGE 0x38
|
|
#define GPIO_INT_LEVEL 0x3C
|
|
#define GPIO_DEBOUNCE_EN 0x40
|
|
#define GPIO_DEBOUNCE_PRESCALE 0x44
|
|
|
|
#define GPIO_PORT_NUM 3
|
|
|
|
static void _set_gpio_irqenable(unsigned int base, unsigned int index,
|
|
int enable)
|
|
{
|
|
unsigned int reg;
|
|
|
|
reg = __raw_readl(base + GPIO_INT_EN);
|
|
reg = (reg & (~(1 << index))) | (!!enable << index);
|
|
__raw_writel(reg, base + GPIO_INT_EN);
|
|
}
|
|
|
|
static void gpio_ack_irq(unsigned int irq)
|
|
{
|
|
unsigned int gpio = irq_to_gpio(irq);
|
|
unsigned int base = GPIO_BASE(gpio / 32);
|
|
|
|
__raw_writel(1 << (gpio % 32), base + GPIO_INT_CLR);
|
|
}
|
|
|
|
static void gpio_mask_irq(unsigned int irq)
|
|
{
|
|
unsigned int gpio = irq_to_gpio(irq);
|
|
unsigned int base = GPIO_BASE(gpio / 32);
|
|
|
|
_set_gpio_irqenable(base, gpio % 32, 0);
|
|
}
|
|
|
|
static void gpio_unmask_irq(unsigned int irq)
|
|
{
|
|
unsigned int gpio = irq_to_gpio(irq);
|
|
unsigned int base = GPIO_BASE(gpio / 32);
|
|
|
|
_set_gpio_irqenable(base, gpio % 32, 1);
|
|
}
|
|
|
|
static int gpio_set_irq_type(unsigned int irq, unsigned int type)
|
|
{
|
|
unsigned int gpio = irq_to_gpio(irq);
|
|
unsigned int gpio_mask = 1 << (gpio % 32);
|
|
unsigned int base = GPIO_BASE(gpio / 32);
|
|
unsigned int reg_both, reg_level, reg_type;
|
|
|
|
reg_type = __raw_readl(base + GPIO_INT_TYPE);
|
|
reg_level = __raw_readl(base + GPIO_INT_LEVEL);
|
|
reg_both = __raw_readl(base + GPIO_INT_BOTH_EDGE);
|
|
|
|
switch (type) {
|
|
case IRQ_TYPE_EDGE_BOTH:
|
|
reg_type &= ~gpio_mask;
|
|
reg_both |= gpio_mask;
|
|
break;
|
|
case IRQ_TYPE_EDGE_RISING:
|
|
reg_type &= ~gpio_mask;
|
|
reg_both &= ~gpio_mask;
|
|
reg_level &= ~gpio_mask;
|
|
break;
|
|
case IRQ_TYPE_EDGE_FALLING:
|
|
reg_type &= ~gpio_mask;
|
|
reg_both &= ~gpio_mask;
|
|
reg_level |= gpio_mask;
|
|
break;
|
|
case IRQ_TYPE_LEVEL_HIGH:
|
|
reg_type |= gpio_mask;
|
|
reg_level &= ~gpio_mask;
|
|
break;
|
|
case IRQ_TYPE_LEVEL_LOW:
|
|
reg_type |= gpio_mask;
|
|
reg_level |= gpio_mask;
|
|
break;
|
|
default:
|
|
return -EINVAL;
|
|
}
|
|
|
|
__raw_writel(reg_type, base + GPIO_INT_TYPE);
|
|
__raw_writel(reg_level, base + GPIO_INT_LEVEL);
|
|
__raw_writel(reg_both, base + GPIO_INT_BOTH_EDGE);
|
|
|
|
gpio_ack_irq(irq);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static void gpio_irq_handler(unsigned int irq, struct irq_desc *desc)
|
|
{
|
|
unsigned int gpio_irq_no, irq_stat;
|
|
unsigned int port = (unsigned int)get_irq_data(irq);
|
|
|
|
irq_stat = __raw_readl(GPIO_BASE(port) + GPIO_INT_STAT);
|
|
|
|
gpio_irq_no = GPIO_IRQ_BASE + port * 32;
|
|
for (; irq_stat != 0; irq_stat >>= 1, gpio_irq_no++) {
|
|
|
|
if ((irq_stat & 1) == 0)
|
|
continue;
|
|
|
|
BUG_ON(!(irq_desc[gpio_irq_no].handle_irq));
|
|
irq_desc[gpio_irq_no].handle_irq(gpio_irq_no,
|
|
&irq_desc[gpio_irq_no]);
|
|
}
|
|
}
|
|
|
|
static struct irq_chip gpio_irq_chip = {
|
|
.name = "GPIO",
|
|
.ack = gpio_ack_irq,
|
|
.mask = gpio_mask_irq,
|
|
.unmask = gpio_unmask_irq,
|
|
.set_type = gpio_set_irq_type,
|
|
};
|
|
|
|
static void _set_gpio_direction(struct gpio_chip *chip, unsigned offset,
|
|
int dir)
|
|
{
|
|
unsigned int base = GPIO_BASE(offset / 32);
|
|
unsigned int reg;
|
|
|
|
reg = __raw_readl(base + GPIO_DIR);
|
|
if (dir)
|
|
reg |= 1 << (offset % 32);
|
|
else
|
|
reg &= ~(1 << (offset % 32));
|
|
__raw_writel(reg, base + GPIO_DIR);
|
|
}
|
|
|
|
static void gemini_gpio_set(struct gpio_chip *chip, unsigned offset, int value)
|
|
{
|
|
unsigned int base = GPIO_BASE(offset / 32);
|
|
|
|
if (value)
|
|
__raw_writel(1 << (offset % 32), base + GPIO_DATA_SET);
|
|
else
|
|
__raw_writel(1 << (offset % 32), base + GPIO_DATA_CLR);
|
|
}
|
|
|
|
static int gemini_gpio_get(struct gpio_chip *chip, unsigned offset)
|
|
{
|
|
unsigned int base = GPIO_BASE(offset / 32);
|
|
|
|
return (__raw_readl(base + GPIO_DATA_IN) >> (offset % 32)) & 1;
|
|
}
|
|
|
|
static int gemini_gpio_direction_input(struct gpio_chip *chip, unsigned offset)
|
|
{
|
|
_set_gpio_direction(chip, offset, 0);
|
|
return 0;
|
|
}
|
|
|
|
static int gemini_gpio_direction_output(struct gpio_chip *chip, unsigned offset,
|
|
int value)
|
|
{
|
|
_set_gpio_direction(chip, offset, 1);
|
|
gemini_gpio_set(chip, offset, value);
|
|
return 0;
|
|
}
|
|
|
|
static struct gpio_chip gemini_gpio_chip = {
|
|
.label = "Gemini",
|
|
.direction_input = gemini_gpio_direction_input,
|
|
.get = gemini_gpio_get,
|
|
.direction_output = gemini_gpio_direction_output,
|
|
.set = gemini_gpio_set,
|
|
.base = 0,
|
|
.ngpio = GPIO_PORT_NUM * 32,
|
|
};
|
|
|
|
void __init gemini_gpio_init(void)
|
|
{
|
|
int i, j;
|
|
|
|
for (i = 0; i < GPIO_PORT_NUM; i++) {
|
|
/* disable, unmask and clear all interrupts */
|
|
__raw_writel(0x0, GPIO_BASE(i) + GPIO_INT_EN);
|
|
__raw_writel(0x0, GPIO_BASE(i) + GPIO_INT_MASK);
|
|
__raw_writel(~0x0, GPIO_BASE(i) + GPIO_INT_CLR);
|
|
|
|
for (j = GPIO_IRQ_BASE + i * 32;
|
|
j < GPIO_IRQ_BASE + (i + 1) * 32; j++) {
|
|
set_irq_chip(j, &gpio_irq_chip);
|
|
set_irq_handler(j, handle_edge_irq);
|
|
set_irq_flags(j, IRQF_VALID);
|
|
}
|
|
|
|
set_irq_chained_handler(IRQ_GPIO(i), gpio_irq_handler);
|
|
set_irq_data(IRQ_GPIO(i), (void *)i);
|
|
}
|
|
|
|
BUG_ON(gpiochip_add(&gemini_gpio_chip));
|
|
}
|