1097 lines
27 KiB
C
1097 lines
27 KiB
C
/*
|
|
* Internal Thunderbolt Connection Manager. This is a firmware running on
|
|
* the Thunderbolt host controller performing most of the low-level
|
|
* handling.
|
|
*
|
|
* Copyright (C) 2017, Intel Corporation
|
|
* Authors: Michael Jamet <michael.jamet@intel.com>
|
|
* Mika Westerberg <mika.westerberg@linux.intel.com>
|
|
*
|
|
* This program is free software; you can redistribute it and/or modify
|
|
* it under the terms of the GNU General Public License version 2 as
|
|
* published by the Free Software Foundation.
|
|
*/
|
|
|
|
#include <linux/delay.h>
|
|
#include <linux/dmi.h>
|
|
#include <linux/mutex.h>
|
|
#include <linux/pci.h>
|
|
#include <linux/sizes.h>
|
|
#include <linux/slab.h>
|
|
#include <linux/workqueue.h>
|
|
|
|
#include "ctl.h"
|
|
#include "nhi_regs.h"
|
|
#include "tb.h"
|
|
|
|
#define PCIE2CIO_CMD 0x30
|
|
#define PCIE2CIO_CMD_TIMEOUT BIT(31)
|
|
#define PCIE2CIO_CMD_START BIT(30)
|
|
#define PCIE2CIO_CMD_WRITE BIT(21)
|
|
#define PCIE2CIO_CMD_CS_MASK GENMASK(20, 19)
|
|
#define PCIE2CIO_CMD_CS_SHIFT 19
|
|
#define PCIE2CIO_CMD_PORT_MASK GENMASK(18, 13)
|
|
#define PCIE2CIO_CMD_PORT_SHIFT 13
|
|
|
|
#define PCIE2CIO_WRDATA 0x34
|
|
#define PCIE2CIO_RDDATA 0x38
|
|
|
|
#define PHY_PORT_CS1 0x37
|
|
#define PHY_PORT_CS1_LINK_DISABLE BIT(14)
|
|
#define PHY_PORT_CS1_LINK_STATE_MASK GENMASK(29, 26)
|
|
#define PHY_PORT_CS1_LINK_STATE_SHIFT 26
|
|
|
|
#define ICM_TIMEOUT 5000 /* ms */
|
|
#define ICM_MAX_LINK 4
|
|
#define ICM_MAX_DEPTH 6
|
|
|
|
/**
|
|
* struct icm - Internal connection manager private data
|
|
* @request_lock: Makes sure only one message is send to ICM at time
|
|
* @rescan_work: Work used to rescan the surviving switches after resume
|
|
* @upstream_port: Pointer to the PCIe upstream port this host
|
|
* controller is connected. This is only set for systems
|
|
* where ICM needs to be started manually
|
|
* @vnd_cap: Vendor defined capability where PCIe2CIO mailbox resides
|
|
* (only set when @upstream_port is not %NULL)
|
|
* @safe_mode: ICM is in safe mode
|
|
* @is_supported: Checks if we can support ICM on this controller
|
|
* @get_mode: Read and return the ICM firmware mode (optional)
|
|
* @get_route: Find a route string for given switch
|
|
* @device_connected: Handle device connected ICM message
|
|
* @device_disconnected: Handle device disconnected ICM message
|
|
*/
|
|
struct icm {
|
|
struct mutex request_lock;
|
|
struct delayed_work rescan_work;
|
|
struct pci_dev *upstream_port;
|
|
int vnd_cap;
|
|
bool safe_mode;
|
|
bool (*is_supported)(struct tb *tb);
|
|
int (*get_mode)(struct tb *tb);
|
|
int (*get_route)(struct tb *tb, u8 link, u8 depth, u64 *route);
|
|
void (*device_connected)(struct tb *tb,
|
|
const struct icm_pkg_header *hdr);
|
|
void (*device_disconnected)(struct tb *tb,
|
|
const struct icm_pkg_header *hdr);
|
|
};
|
|
|
|
struct icm_notification {
|
|
struct work_struct work;
|
|
struct icm_pkg_header *pkg;
|
|
struct tb *tb;
|
|
};
|
|
|
|
static inline struct tb *icm_to_tb(struct icm *icm)
|
|
{
|
|
return ((void *)icm - sizeof(struct tb));
|
|
}
|
|
|
|
static inline u8 phy_port_from_route(u64 route, u8 depth)
|
|
{
|
|
return tb_switch_phy_port_from_link(route >> ((depth - 1) * 8));
|
|
}
|
|
|
|
static inline u8 dual_link_from_link(u8 link)
|
|
{
|
|
return link ? ((link - 1) ^ 0x01) + 1 : 0;
|
|
}
|
|
|
|
static inline u64 get_route(u32 route_hi, u32 route_lo)
|
|
{
|
|
return (u64)route_hi << 32 | route_lo;
|
|
}
|
|
|
|
static inline bool is_apple(void)
|
|
{
|
|
return dmi_match(DMI_BOARD_VENDOR, "Apple Inc.");
|
|
}
|
|
|
|
static bool icm_match(const struct tb_cfg_request *req,
|
|
const struct ctl_pkg *pkg)
|
|
{
|
|
const struct icm_pkg_header *res_hdr = pkg->buffer;
|
|
const struct icm_pkg_header *req_hdr = req->request;
|
|
|
|
if (pkg->frame.eof != req->response_type)
|
|
return false;
|
|
if (res_hdr->code != req_hdr->code)
|
|
return false;
|
|
|
|
return true;
|
|
}
|
|
|
|
static bool icm_copy(struct tb_cfg_request *req, const struct ctl_pkg *pkg)
|
|
{
|
|
const struct icm_pkg_header *hdr = pkg->buffer;
|
|
|
|
if (hdr->packet_id < req->npackets) {
|
|
size_t offset = hdr->packet_id * req->response_size;
|
|
|
|
memcpy(req->response + offset, pkg->buffer, req->response_size);
|
|
}
|
|
|
|
return hdr->packet_id == hdr->total_packets - 1;
|
|
}
|
|
|
|
static int icm_request(struct tb *tb, const void *request, size_t request_size,
|
|
void *response, size_t response_size, size_t npackets,
|
|
unsigned int timeout_msec)
|
|
{
|
|
struct icm *icm = tb_priv(tb);
|
|
int retries = 3;
|
|
|
|
do {
|
|
struct tb_cfg_request *req;
|
|
struct tb_cfg_result res;
|
|
|
|
req = tb_cfg_request_alloc();
|
|
if (!req)
|
|
return -ENOMEM;
|
|
|
|
req->match = icm_match;
|
|
req->copy = icm_copy;
|
|
req->request = request;
|
|
req->request_size = request_size;
|
|
req->request_type = TB_CFG_PKG_ICM_CMD;
|
|
req->response = response;
|
|
req->npackets = npackets;
|
|
req->response_size = response_size;
|
|
req->response_type = TB_CFG_PKG_ICM_RESP;
|
|
|
|
mutex_lock(&icm->request_lock);
|
|
res = tb_cfg_request_sync(tb->ctl, req, timeout_msec);
|
|
mutex_unlock(&icm->request_lock);
|
|
|
|
tb_cfg_request_put(req);
|
|
|
|
if (res.err != -ETIMEDOUT)
|
|
return res.err == 1 ? -EIO : res.err;
|
|
|
|
usleep_range(20, 50);
|
|
} while (retries--);
|
|
|
|
return -ETIMEDOUT;
|
|
}
|
|
|
|
static bool icm_fr_is_supported(struct tb *tb)
|
|
{
|
|
return !is_apple();
|
|
}
|
|
|
|
static inline int icm_fr_get_switch_index(u32 port)
|
|
{
|
|
int index;
|
|
|
|
if ((port & ICM_PORT_TYPE_MASK) != TB_TYPE_PORT)
|
|
return 0;
|
|
|
|
index = port >> ICM_PORT_INDEX_SHIFT;
|
|
return index != 0xff ? index : 0;
|
|
}
|
|
|
|
static int icm_fr_get_route(struct tb *tb, u8 link, u8 depth, u64 *route)
|
|
{
|
|
struct icm_fr_pkg_get_topology_response *switches, *sw;
|
|
struct icm_fr_pkg_get_topology request = {
|
|
.hdr = { .code = ICM_GET_TOPOLOGY },
|
|
};
|
|
size_t npackets = ICM_GET_TOPOLOGY_PACKETS;
|
|
int ret, index;
|
|
u8 i;
|
|
|
|
switches = kcalloc(npackets, sizeof(*switches), GFP_KERNEL);
|
|
if (!switches)
|
|
return -ENOMEM;
|
|
|
|
ret = icm_request(tb, &request, sizeof(request), switches,
|
|
sizeof(*switches), npackets, ICM_TIMEOUT);
|
|
if (ret)
|
|
goto err_free;
|
|
|
|
sw = &switches[0];
|
|
index = icm_fr_get_switch_index(sw->ports[link]);
|
|
if (!index) {
|
|
ret = -ENODEV;
|
|
goto err_free;
|
|
}
|
|
|
|
sw = &switches[index];
|
|
for (i = 1; i < depth; i++) {
|
|
unsigned int j;
|
|
|
|
if (!(sw->first_data & ICM_SWITCH_USED)) {
|
|
ret = -ENODEV;
|
|
goto err_free;
|
|
}
|
|
|
|
for (j = 0; j < ARRAY_SIZE(sw->ports); j++) {
|
|
index = icm_fr_get_switch_index(sw->ports[j]);
|
|
if (index > sw->switch_index) {
|
|
sw = &switches[index];
|
|
break;
|
|
}
|
|
}
|
|
}
|
|
|
|
*route = get_route(sw->route_hi, sw->route_lo);
|
|
|
|
err_free:
|
|
kfree(switches);
|
|
return ret;
|
|
}
|
|
|
|
static int icm_fr_approve_switch(struct tb *tb, struct tb_switch *sw)
|
|
{
|
|
struct icm_fr_pkg_approve_device request;
|
|
struct icm_fr_pkg_approve_device reply;
|
|
int ret;
|
|
|
|
memset(&request, 0, sizeof(request));
|
|
memcpy(&request.ep_uuid, sw->uuid, sizeof(request.ep_uuid));
|
|
request.hdr.code = ICM_APPROVE_DEVICE;
|
|
request.connection_id = sw->connection_id;
|
|
request.connection_key = sw->connection_key;
|
|
|
|
memset(&reply, 0, sizeof(reply));
|
|
/* Use larger timeout as establishing tunnels can take some time */
|
|
ret = icm_request(tb, &request, sizeof(request), &reply, sizeof(reply),
|
|
1, 10000);
|
|
if (ret)
|
|
return ret;
|
|
|
|
if (reply.hdr.flags & ICM_FLAGS_ERROR) {
|
|
tb_warn(tb, "PCIe tunnel creation failed\n");
|
|
return -EIO;
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int icm_fr_add_switch_key(struct tb *tb, struct tb_switch *sw)
|
|
{
|
|
struct icm_fr_pkg_add_device_key request;
|
|
struct icm_fr_pkg_add_device_key_response reply;
|
|
int ret;
|
|
|
|
memset(&request, 0, sizeof(request));
|
|
memcpy(&request.ep_uuid, sw->uuid, sizeof(request.ep_uuid));
|
|
request.hdr.code = ICM_ADD_DEVICE_KEY;
|
|
request.connection_id = sw->connection_id;
|
|
request.connection_key = sw->connection_key;
|
|
memcpy(request.key, sw->key, TB_SWITCH_KEY_SIZE);
|
|
|
|
memset(&reply, 0, sizeof(reply));
|
|
ret = icm_request(tb, &request, sizeof(request), &reply, sizeof(reply),
|
|
1, ICM_TIMEOUT);
|
|
if (ret)
|
|
return ret;
|
|
|
|
if (reply.hdr.flags & ICM_FLAGS_ERROR) {
|
|
tb_warn(tb, "Adding key to switch failed\n");
|
|
return -EIO;
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int icm_fr_challenge_switch_key(struct tb *tb, struct tb_switch *sw,
|
|
const u8 *challenge, u8 *response)
|
|
{
|
|
struct icm_fr_pkg_challenge_device request;
|
|
struct icm_fr_pkg_challenge_device_response reply;
|
|
int ret;
|
|
|
|
memset(&request, 0, sizeof(request));
|
|
memcpy(&request.ep_uuid, sw->uuid, sizeof(request.ep_uuid));
|
|
request.hdr.code = ICM_CHALLENGE_DEVICE;
|
|
request.connection_id = sw->connection_id;
|
|
request.connection_key = sw->connection_key;
|
|
memcpy(request.challenge, challenge, TB_SWITCH_KEY_SIZE);
|
|
|
|
memset(&reply, 0, sizeof(reply));
|
|
ret = icm_request(tb, &request, sizeof(request), &reply, sizeof(reply),
|
|
1, ICM_TIMEOUT);
|
|
if (ret)
|
|
return ret;
|
|
|
|
if (reply.hdr.flags & ICM_FLAGS_ERROR)
|
|
return -EKEYREJECTED;
|
|
if (reply.hdr.flags & ICM_FLAGS_NO_KEY)
|
|
return -ENOKEY;
|
|
|
|
memcpy(response, reply.response, TB_SWITCH_KEY_SIZE);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static void remove_switch(struct tb_switch *sw)
|
|
{
|
|
struct tb_switch *parent_sw;
|
|
|
|
parent_sw = tb_to_switch(sw->dev.parent);
|
|
tb_port_at(tb_route(sw), parent_sw)->remote = NULL;
|
|
tb_switch_remove(sw);
|
|
}
|
|
|
|
static void
|
|
icm_fr_device_connected(struct tb *tb, const struct icm_pkg_header *hdr)
|
|
{
|
|
const struct icm_fr_event_device_connected *pkg =
|
|
(const struct icm_fr_event_device_connected *)hdr;
|
|
struct tb_switch *sw, *parent_sw;
|
|
struct icm *icm = tb_priv(tb);
|
|
bool authorized = false;
|
|
u8 link, depth;
|
|
u64 route;
|
|
int ret;
|
|
|
|
link = pkg->link_info & ICM_LINK_INFO_LINK_MASK;
|
|
depth = (pkg->link_info & ICM_LINK_INFO_DEPTH_MASK) >>
|
|
ICM_LINK_INFO_DEPTH_SHIFT;
|
|
authorized = pkg->link_info & ICM_LINK_INFO_APPROVED;
|
|
|
|
ret = icm->get_route(tb, link, depth, &route);
|
|
if (ret) {
|
|
tb_err(tb, "failed to find route string for switch at %u.%u\n",
|
|
link, depth);
|
|
return;
|
|
}
|
|
|
|
sw = tb_switch_find_by_uuid(tb, &pkg->ep_uuid);
|
|
if (sw) {
|
|
u8 phy_port, sw_phy_port;
|
|
|
|
parent_sw = tb_to_switch(sw->dev.parent);
|
|
sw_phy_port = phy_port_from_route(tb_route(sw), sw->depth);
|
|
phy_port = phy_port_from_route(route, depth);
|
|
|
|
/*
|
|
* On resume ICM will send us connected events for the
|
|
* devices that still are present. However, that
|
|
* information might have changed for example by the
|
|
* fact that a switch on a dual-link connection might
|
|
* have been enumerated using the other link now. Make
|
|
* sure our book keeping matches that.
|
|
*/
|
|
if (sw->depth == depth && sw_phy_port == phy_port &&
|
|
!!sw->authorized == authorized) {
|
|
tb_port_at(tb_route(sw), parent_sw)->remote = NULL;
|
|
tb_port_at(route, parent_sw)->remote =
|
|
tb_upstream_port(sw);
|
|
sw->config.route_hi = upper_32_bits(route);
|
|
sw->config.route_lo = lower_32_bits(route);
|
|
sw->connection_id = pkg->connection_id;
|
|
sw->connection_key = pkg->connection_key;
|
|
sw->link = link;
|
|
sw->depth = depth;
|
|
sw->is_unplugged = false;
|
|
tb_switch_put(sw);
|
|
return;
|
|
}
|
|
|
|
/*
|
|
* User connected the same switch to another physical
|
|
* port or to another part of the topology. Remove the
|
|
* existing switch now before adding the new one.
|
|
*/
|
|
remove_switch(sw);
|
|
tb_switch_put(sw);
|
|
}
|
|
|
|
/*
|
|
* If the switch was not found by UUID, look for a switch on
|
|
* same physical port (taking possible link aggregation into
|
|
* account) and depth. If we found one it is definitely a stale
|
|
* one so remove it first.
|
|
*/
|
|
sw = tb_switch_find_by_link_depth(tb, link, depth);
|
|
if (!sw) {
|
|
u8 dual_link;
|
|
|
|
dual_link = dual_link_from_link(link);
|
|
if (dual_link)
|
|
sw = tb_switch_find_by_link_depth(tb, dual_link, depth);
|
|
}
|
|
if (sw) {
|
|
remove_switch(sw);
|
|
tb_switch_put(sw);
|
|
}
|
|
|
|
parent_sw = tb_switch_find_by_link_depth(tb, link, depth - 1);
|
|
if (!parent_sw) {
|
|
tb_err(tb, "failed to find parent switch for %u.%u\n",
|
|
link, depth);
|
|
return;
|
|
}
|
|
|
|
sw = tb_switch_alloc(tb, &parent_sw->dev, route);
|
|
if (!sw) {
|
|
tb_switch_put(parent_sw);
|
|
return;
|
|
}
|
|
|
|
sw->uuid = kmemdup(&pkg->ep_uuid, sizeof(pkg->ep_uuid), GFP_KERNEL);
|
|
sw->connection_id = pkg->connection_id;
|
|
sw->connection_key = pkg->connection_key;
|
|
sw->link = link;
|
|
sw->depth = depth;
|
|
sw->authorized = authorized;
|
|
sw->security_level = (pkg->hdr.flags & ICM_FLAGS_SLEVEL_MASK) >>
|
|
ICM_FLAGS_SLEVEL_SHIFT;
|
|
|
|
/* Link the two switches now */
|
|
tb_port_at(route, parent_sw)->remote = tb_upstream_port(sw);
|
|
tb_upstream_port(sw)->remote = tb_port_at(route, parent_sw);
|
|
|
|
ret = tb_switch_add(sw);
|
|
if (ret) {
|
|
tb_port_at(tb_route(sw), parent_sw)->remote = NULL;
|
|
tb_switch_put(sw);
|
|
}
|
|
tb_switch_put(parent_sw);
|
|
}
|
|
|
|
static void
|
|
icm_fr_device_disconnected(struct tb *tb, const struct icm_pkg_header *hdr)
|
|
{
|
|
const struct icm_fr_event_device_disconnected *pkg =
|
|
(const struct icm_fr_event_device_disconnected *)hdr;
|
|
struct tb_switch *sw;
|
|
u8 link, depth;
|
|
|
|
link = pkg->link_info & ICM_LINK_INFO_LINK_MASK;
|
|
depth = (pkg->link_info & ICM_LINK_INFO_DEPTH_MASK) >>
|
|
ICM_LINK_INFO_DEPTH_SHIFT;
|
|
|
|
if (link > ICM_MAX_LINK || depth > ICM_MAX_DEPTH) {
|
|
tb_warn(tb, "invalid topology %u.%u, ignoring\n", link, depth);
|
|
return;
|
|
}
|
|
|
|
sw = tb_switch_find_by_link_depth(tb, link, depth);
|
|
if (!sw) {
|
|
tb_warn(tb, "no switch exists at %u.%u, ignoring\n", link,
|
|
depth);
|
|
return;
|
|
}
|
|
|
|
remove_switch(sw);
|
|
tb_switch_put(sw);
|
|
}
|
|
|
|
static struct pci_dev *get_upstream_port(struct pci_dev *pdev)
|
|
{
|
|
struct pci_dev *parent;
|
|
|
|
parent = pci_upstream_bridge(pdev);
|
|
while (parent) {
|
|
if (!pci_is_pcie(parent))
|
|
return NULL;
|
|
if (pci_pcie_type(parent) == PCI_EXP_TYPE_UPSTREAM)
|
|
break;
|
|
parent = pci_upstream_bridge(parent);
|
|
}
|
|
|
|
if (!parent)
|
|
return NULL;
|
|
|
|
switch (parent->device) {
|
|
case PCI_DEVICE_ID_INTEL_ALPINE_RIDGE_2C_BRIDGE:
|
|
case PCI_DEVICE_ID_INTEL_ALPINE_RIDGE_4C_BRIDGE:
|
|
case PCI_DEVICE_ID_INTEL_ALPINE_RIDGE_LP_BRIDGE:
|
|
case PCI_DEVICE_ID_INTEL_ALPINE_RIDGE_C_4C_BRIDGE:
|
|
case PCI_DEVICE_ID_INTEL_ALPINE_RIDGE_C_2C_BRIDGE:
|
|
return parent;
|
|
}
|
|
|
|
return NULL;
|
|
}
|
|
|
|
static bool icm_ar_is_supported(struct tb *tb)
|
|
{
|
|
struct pci_dev *upstream_port;
|
|
struct icm *icm = tb_priv(tb);
|
|
|
|
/*
|
|
* Starting from Alpine Ridge we can use ICM on Apple machines
|
|
* as well. We just need to reset and re-enable it first.
|
|
*/
|
|
if (!is_apple())
|
|
return true;
|
|
|
|
/*
|
|
* Find the upstream PCIe port in case we need to do reset
|
|
* through its vendor specific registers.
|
|
*/
|
|
upstream_port = get_upstream_port(tb->nhi->pdev);
|
|
if (upstream_port) {
|
|
int cap;
|
|
|
|
cap = pci_find_ext_capability(upstream_port,
|
|
PCI_EXT_CAP_ID_VNDR);
|
|
if (cap > 0) {
|
|
icm->upstream_port = upstream_port;
|
|
icm->vnd_cap = cap;
|
|
|
|
return true;
|
|
}
|
|
}
|
|
|
|
return false;
|
|
}
|
|
|
|
static int icm_ar_get_mode(struct tb *tb)
|
|
{
|
|
struct tb_nhi *nhi = tb->nhi;
|
|
int retries = 5;
|
|
u32 val;
|
|
|
|
do {
|
|
val = ioread32(nhi->iobase + REG_FW_STS);
|
|
if (val & REG_FW_STS_NVM_AUTH_DONE)
|
|
break;
|
|
msleep(30);
|
|
} while (--retries);
|
|
|
|
if (!retries) {
|
|
dev_err(&nhi->pdev->dev, "ICM firmware not authenticated\n");
|
|
return -ENODEV;
|
|
}
|
|
|
|
return nhi_mailbox_mode(nhi);
|
|
}
|
|
|
|
static int icm_ar_get_route(struct tb *tb, u8 link, u8 depth, u64 *route)
|
|
{
|
|
struct icm_ar_pkg_get_route_response reply;
|
|
struct icm_ar_pkg_get_route request = {
|
|
.hdr = { .code = ICM_GET_ROUTE },
|
|
.link_info = depth << ICM_LINK_INFO_DEPTH_SHIFT | link,
|
|
};
|
|
int ret;
|
|
|
|
memset(&reply, 0, sizeof(reply));
|
|
ret = icm_request(tb, &request, sizeof(request), &reply, sizeof(reply),
|
|
1, ICM_TIMEOUT);
|
|
if (ret)
|
|
return ret;
|
|
|
|
if (reply.hdr.flags & ICM_FLAGS_ERROR)
|
|
return -EIO;
|
|
|
|
*route = get_route(reply.route_hi, reply.route_lo);
|
|
return 0;
|
|
}
|
|
|
|
static void icm_handle_notification(struct work_struct *work)
|
|
{
|
|
struct icm_notification *n = container_of(work, typeof(*n), work);
|
|
struct tb *tb = n->tb;
|
|
struct icm *icm = tb_priv(tb);
|
|
|
|
mutex_lock(&tb->lock);
|
|
|
|
switch (n->pkg->code) {
|
|
case ICM_EVENT_DEVICE_CONNECTED:
|
|
icm->device_connected(tb, n->pkg);
|
|
break;
|
|
case ICM_EVENT_DEVICE_DISCONNECTED:
|
|
icm->device_disconnected(tb, n->pkg);
|
|
break;
|
|
}
|
|
|
|
mutex_unlock(&tb->lock);
|
|
|
|
kfree(n->pkg);
|
|
kfree(n);
|
|
}
|
|
|
|
static void icm_handle_event(struct tb *tb, enum tb_cfg_pkg_type type,
|
|
const void *buf, size_t size)
|
|
{
|
|
struct icm_notification *n;
|
|
|
|
n = kmalloc(sizeof(*n), GFP_KERNEL);
|
|
if (!n)
|
|
return;
|
|
|
|
INIT_WORK(&n->work, icm_handle_notification);
|
|
n->pkg = kmemdup(buf, size, GFP_KERNEL);
|
|
n->tb = tb;
|
|
|
|
queue_work(tb->wq, &n->work);
|
|
}
|
|
|
|
static int
|
|
__icm_driver_ready(struct tb *tb, enum tb_security_level *security_level)
|
|
{
|
|
struct icm_pkg_driver_ready_response reply;
|
|
struct icm_pkg_driver_ready request = {
|
|
.hdr.code = ICM_DRIVER_READY,
|
|
};
|
|
unsigned int retries = 10;
|
|
int ret;
|
|
|
|
memset(&reply, 0, sizeof(reply));
|
|
ret = icm_request(tb, &request, sizeof(request), &reply, sizeof(reply),
|
|
1, ICM_TIMEOUT);
|
|
if (ret)
|
|
return ret;
|
|
|
|
if (security_level)
|
|
*security_level = reply.security_level & 0xf;
|
|
|
|
/*
|
|
* Hold on here until the switch config space is accessible so
|
|
* that we can read root switch config successfully.
|
|
*/
|
|
do {
|
|
struct tb_cfg_result res;
|
|
u32 tmp;
|
|
|
|
res = tb_cfg_read_raw(tb->ctl, &tmp, 0, 0, TB_CFG_SWITCH,
|
|
0, 1, 100);
|
|
if (!res.err)
|
|
return 0;
|
|
|
|
msleep(50);
|
|
} while (--retries);
|
|
|
|
return -ETIMEDOUT;
|
|
}
|
|
|
|
static int pci2cio_wait_completion(struct icm *icm, unsigned long timeout_msec)
|
|
{
|
|
unsigned long end = jiffies + msecs_to_jiffies(timeout_msec);
|
|
u32 cmd;
|
|
|
|
do {
|
|
pci_read_config_dword(icm->upstream_port,
|
|
icm->vnd_cap + PCIE2CIO_CMD, &cmd);
|
|
if (!(cmd & PCIE2CIO_CMD_START)) {
|
|
if (cmd & PCIE2CIO_CMD_TIMEOUT)
|
|
break;
|
|
return 0;
|
|
}
|
|
|
|
msleep(50);
|
|
} while (time_before(jiffies, end));
|
|
|
|
return -ETIMEDOUT;
|
|
}
|
|
|
|
static int pcie2cio_read(struct icm *icm, enum tb_cfg_space cs,
|
|
unsigned int port, unsigned int index, u32 *data)
|
|
{
|
|
struct pci_dev *pdev = icm->upstream_port;
|
|
int ret, vnd_cap = icm->vnd_cap;
|
|
u32 cmd;
|
|
|
|
cmd = index;
|
|
cmd |= (port << PCIE2CIO_CMD_PORT_SHIFT) & PCIE2CIO_CMD_PORT_MASK;
|
|
cmd |= (cs << PCIE2CIO_CMD_CS_SHIFT) & PCIE2CIO_CMD_CS_MASK;
|
|
cmd |= PCIE2CIO_CMD_START;
|
|
pci_write_config_dword(pdev, vnd_cap + PCIE2CIO_CMD, cmd);
|
|
|
|
ret = pci2cio_wait_completion(icm, 5000);
|
|
if (ret)
|
|
return ret;
|
|
|
|
pci_read_config_dword(pdev, vnd_cap + PCIE2CIO_RDDATA, data);
|
|
return 0;
|
|
}
|
|
|
|
static int pcie2cio_write(struct icm *icm, enum tb_cfg_space cs,
|
|
unsigned int port, unsigned int index, u32 data)
|
|
{
|
|
struct pci_dev *pdev = icm->upstream_port;
|
|
int vnd_cap = icm->vnd_cap;
|
|
u32 cmd;
|
|
|
|
pci_write_config_dword(pdev, vnd_cap + PCIE2CIO_WRDATA, data);
|
|
|
|
cmd = index;
|
|
cmd |= (port << PCIE2CIO_CMD_PORT_SHIFT) & PCIE2CIO_CMD_PORT_MASK;
|
|
cmd |= (cs << PCIE2CIO_CMD_CS_SHIFT) & PCIE2CIO_CMD_CS_MASK;
|
|
cmd |= PCIE2CIO_CMD_WRITE | PCIE2CIO_CMD_START;
|
|
pci_write_config_dword(pdev, vnd_cap + PCIE2CIO_CMD, cmd);
|
|
|
|
return pci2cio_wait_completion(icm, 5000);
|
|
}
|
|
|
|
static int icm_firmware_reset(struct tb *tb, struct tb_nhi *nhi)
|
|
{
|
|
struct icm *icm = tb_priv(tb);
|
|
u32 val;
|
|
|
|
/* Put ARC to wait for CIO reset event to happen */
|
|
val = ioread32(nhi->iobase + REG_FW_STS);
|
|
val |= REG_FW_STS_CIO_RESET_REQ;
|
|
iowrite32(val, nhi->iobase + REG_FW_STS);
|
|
|
|
/* Re-start ARC */
|
|
val = ioread32(nhi->iobase + REG_FW_STS);
|
|
val |= REG_FW_STS_ICM_EN_INVERT;
|
|
val |= REG_FW_STS_ICM_EN_CPU;
|
|
iowrite32(val, nhi->iobase + REG_FW_STS);
|
|
|
|
/* Trigger CIO reset now */
|
|
return pcie2cio_write(icm, TB_CFG_SWITCH, 0, 0x50, BIT(9));
|
|
}
|
|
|
|
static int icm_firmware_start(struct tb *tb, struct tb_nhi *nhi)
|
|
{
|
|
unsigned int retries = 10;
|
|
int ret;
|
|
u32 val;
|
|
|
|
/* Check if the ICM firmware is already running */
|
|
val = ioread32(nhi->iobase + REG_FW_STS);
|
|
if (val & REG_FW_STS_ICM_EN)
|
|
return 0;
|
|
|
|
dev_info(&nhi->pdev->dev, "starting ICM firmware\n");
|
|
|
|
ret = icm_firmware_reset(tb, nhi);
|
|
if (ret)
|
|
return ret;
|
|
|
|
/* Wait until the ICM firmware tells us it is up and running */
|
|
do {
|
|
/* Check that the ICM firmware is running */
|
|
val = ioread32(nhi->iobase + REG_FW_STS);
|
|
if (val & REG_FW_STS_NVM_AUTH_DONE)
|
|
return 0;
|
|
|
|
msleep(300);
|
|
} while (--retries);
|
|
|
|
return -ETIMEDOUT;
|
|
}
|
|
|
|
static int icm_reset_phy_port(struct tb *tb, int phy_port)
|
|
{
|
|
struct icm *icm = tb_priv(tb);
|
|
u32 state0, state1;
|
|
int port0, port1;
|
|
u32 val0, val1;
|
|
int ret;
|
|
|
|
if (!icm->upstream_port)
|
|
return 0;
|
|
|
|
if (phy_port) {
|
|
port0 = 3;
|
|
port1 = 4;
|
|
} else {
|
|
port0 = 1;
|
|
port1 = 2;
|
|
}
|
|
|
|
/*
|
|
* Read link status of both null ports belonging to a single
|
|
* physical port.
|
|
*/
|
|
ret = pcie2cio_read(icm, TB_CFG_PORT, port0, PHY_PORT_CS1, &val0);
|
|
if (ret)
|
|
return ret;
|
|
ret = pcie2cio_read(icm, TB_CFG_PORT, port1, PHY_PORT_CS1, &val1);
|
|
if (ret)
|
|
return ret;
|
|
|
|
state0 = val0 & PHY_PORT_CS1_LINK_STATE_MASK;
|
|
state0 >>= PHY_PORT_CS1_LINK_STATE_SHIFT;
|
|
state1 = val1 & PHY_PORT_CS1_LINK_STATE_MASK;
|
|
state1 >>= PHY_PORT_CS1_LINK_STATE_SHIFT;
|
|
|
|
/* If they are both up we need to reset them now */
|
|
if (state0 != TB_PORT_UP || state1 != TB_PORT_UP)
|
|
return 0;
|
|
|
|
val0 |= PHY_PORT_CS1_LINK_DISABLE;
|
|
ret = pcie2cio_write(icm, TB_CFG_PORT, port0, PHY_PORT_CS1, val0);
|
|
if (ret)
|
|
return ret;
|
|
|
|
val1 |= PHY_PORT_CS1_LINK_DISABLE;
|
|
ret = pcie2cio_write(icm, TB_CFG_PORT, port1, PHY_PORT_CS1, val1);
|
|
if (ret)
|
|
return ret;
|
|
|
|
/* Wait a bit and then re-enable both ports */
|
|
usleep_range(10, 100);
|
|
|
|
ret = pcie2cio_read(icm, TB_CFG_PORT, port0, PHY_PORT_CS1, &val0);
|
|
if (ret)
|
|
return ret;
|
|
ret = pcie2cio_read(icm, TB_CFG_PORT, port1, PHY_PORT_CS1, &val1);
|
|
if (ret)
|
|
return ret;
|
|
|
|
val0 &= ~PHY_PORT_CS1_LINK_DISABLE;
|
|
ret = pcie2cio_write(icm, TB_CFG_PORT, port0, PHY_PORT_CS1, val0);
|
|
if (ret)
|
|
return ret;
|
|
|
|
val1 &= ~PHY_PORT_CS1_LINK_DISABLE;
|
|
return pcie2cio_write(icm, TB_CFG_PORT, port1, PHY_PORT_CS1, val1);
|
|
}
|
|
|
|
static int icm_firmware_init(struct tb *tb)
|
|
{
|
|
struct icm *icm = tb_priv(tb);
|
|
struct tb_nhi *nhi = tb->nhi;
|
|
int ret;
|
|
|
|
ret = icm_firmware_start(tb, nhi);
|
|
if (ret) {
|
|
dev_err(&nhi->pdev->dev, "could not start ICM firmware\n");
|
|
return ret;
|
|
}
|
|
|
|
if (icm->get_mode) {
|
|
ret = icm->get_mode(tb);
|
|
|
|
switch (ret) {
|
|
case NHI_FW_SAFE_MODE:
|
|
icm->safe_mode = true;
|
|
break;
|
|
|
|
case NHI_FW_CM_MODE:
|
|
/* Ask ICM to accept all Thunderbolt devices */
|
|
nhi_mailbox_cmd(nhi, NHI_MAILBOX_ALLOW_ALL_DEVS, 0);
|
|
break;
|
|
|
|
default:
|
|
tb_err(tb, "ICM firmware is in wrong mode: %u\n", ret);
|
|
return -ENODEV;
|
|
}
|
|
}
|
|
|
|
/*
|
|
* Reset both physical ports if there is anything connected to
|
|
* them already.
|
|
*/
|
|
ret = icm_reset_phy_port(tb, 0);
|
|
if (ret)
|
|
dev_warn(&nhi->pdev->dev, "failed to reset links on port0\n");
|
|
ret = icm_reset_phy_port(tb, 1);
|
|
if (ret)
|
|
dev_warn(&nhi->pdev->dev, "failed to reset links on port1\n");
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int icm_driver_ready(struct tb *tb)
|
|
{
|
|
struct icm *icm = tb_priv(tb);
|
|
int ret;
|
|
|
|
ret = icm_firmware_init(tb);
|
|
if (ret)
|
|
return ret;
|
|
|
|
if (icm->safe_mode) {
|
|
tb_info(tb, "Thunderbolt host controller is in safe mode.\n");
|
|
tb_info(tb, "You need to update NVM firmware of the controller before it can be used.\n");
|
|
tb_info(tb, "For latest updates check https://thunderbolttechnology.net/updates.\n");
|
|
return 0;
|
|
}
|
|
|
|
return __icm_driver_ready(tb, &tb->security_level);
|
|
}
|
|
|
|
static int icm_suspend(struct tb *tb)
|
|
{
|
|
int ret;
|
|
|
|
ret = nhi_mailbox_cmd(tb->nhi, NHI_MAILBOX_SAVE_DEVS, 0);
|
|
if (ret)
|
|
tb_info(tb, "Ignoring mailbox command error (%d) in %s\n",
|
|
ret, __func__);
|
|
|
|
return 0;
|
|
}
|
|
|
|
/*
|
|
* Mark all switches (except root switch) below this one unplugged. ICM
|
|
* firmware will send us an updated list of switches after we have send
|
|
* it driver ready command. If a switch is not in that list it will be
|
|
* removed when we perform rescan.
|
|
*/
|
|
static void icm_unplug_children(struct tb_switch *sw)
|
|
{
|
|
unsigned int i;
|
|
|
|
if (tb_route(sw))
|
|
sw->is_unplugged = true;
|
|
|
|
for (i = 1; i <= sw->config.max_port_number; i++) {
|
|
struct tb_port *port = &sw->ports[i];
|
|
|
|
if (tb_is_upstream_port(port))
|
|
continue;
|
|
if (!port->remote)
|
|
continue;
|
|
|
|
icm_unplug_children(port->remote->sw);
|
|
}
|
|
}
|
|
|
|
static void icm_free_unplugged_children(struct tb_switch *sw)
|
|
{
|
|
unsigned int i;
|
|
|
|
for (i = 1; i <= sw->config.max_port_number; i++) {
|
|
struct tb_port *port = &sw->ports[i];
|
|
|
|
if (tb_is_upstream_port(port))
|
|
continue;
|
|
if (!port->remote)
|
|
continue;
|
|
|
|
if (port->remote->sw->is_unplugged) {
|
|
tb_switch_remove(port->remote->sw);
|
|
port->remote = NULL;
|
|
} else {
|
|
icm_free_unplugged_children(port->remote->sw);
|
|
}
|
|
}
|
|
}
|
|
|
|
static void icm_rescan_work(struct work_struct *work)
|
|
{
|
|
struct icm *icm = container_of(work, struct icm, rescan_work.work);
|
|
struct tb *tb = icm_to_tb(icm);
|
|
|
|
mutex_lock(&tb->lock);
|
|
if (tb->root_switch)
|
|
icm_free_unplugged_children(tb->root_switch);
|
|
mutex_unlock(&tb->lock);
|
|
}
|
|
|
|
static void icm_complete(struct tb *tb)
|
|
{
|
|
struct icm *icm = tb_priv(tb);
|
|
|
|
if (tb->nhi->going_away)
|
|
return;
|
|
|
|
icm_unplug_children(tb->root_switch);
|
|
|
|
/*
|
|
* Now all existing children should be resumed, start events
|
|
* from ICM to get updated status.
|
|
*/
|
|
__icm_driver_ready(tb, NULL);
|
|
|
|
/*
|
|
* We do not get notifications of devices that have been
|
|
* unplugged during suspend so schedule rescan to clean them up
|
|
* if any.
|
|
*/
|
|
queue_delayed_work(tb->wq, &icm->rescan_work, msecs_to_jiffies(500));
|
|
}
|
|
|
|
static int icm_start(struct tb *tb)
|
|
{
|
|
struct icm *icm = tb_priv(tb);
|
|
int ret;
|
|
|
|
if (icm->safe_mode)
|
|
tb->root_switch = tb_switch_alloc_safe_mode(tb, &tb->dev, 0);
|
|
else
|
|
tb->root_switch = tb_switch_alloc(tb, &tb->dev, 0);
|
|
if (!tb->root_switch)
|
|
return -ENODEV;
|
|
|
|
/*
|
|
* NVM upgrade has not been tested on Apple systems and they
|
|
* don't provide images publicly either. To be on the safe side
|
|
* prevent root switch NVM upgrade on Macs for now.
|
|
*/
|
|
tb->root_switch->no_nvm_upgrade = is_apple();
|
|
|
|
ret = tb_switch_add(tb->root_switch);
|
|
if (ret)
|
|
tb_switch_put(tb->root_switch);
|
|
|
|
return ret;
|
|
}
|
|
|
|
static void icm_stop(struct tb *tb)
|
|
{
|
|
struct icm *icm = tb_priv(tb);
|
|
|
|
cancel_delayed_work(&icm->rescan_work);
|
|
tb_switch_remove(tb->root_switch);
|
|
tb->root_switch = NULL;
|
|
nhi_mailbox_cmd(tb->nhi, NHI_MAILBOX_DRV_UNLOADS, 0);
|
|
}
|
|
|
|
static int icm_disconnect_pcie_paths(struct tb *tb)
|
|
{
|
|
return nhi_mailbox_cmd(tb->nhi, NHI_MAILBOX_DISCONNECT_PCIE_PATHS, 0);
|
|
}
|
|
|
|
/* Falcon Ridge and Alpine Ridge */
|
|
static const struct tb_cm_ops icm_fr_ops = {
|
|
.driver_ready = icm_driver_ready,
|
|
.start = icm_start,
|
|
.stop = icm_stop,
|
|
.suspend = icm_suspend,
|
|
.complete = icm_complete,
|
|
.handle_event = icm_handle_event,
|
|
.approve_switch = icm_fr_approve_switch,
|
|
.add_switch_key = icm_fr_add_switch_key,
|
|
.challenge_switch_key = icm_fr_challenge_switch_key,
|
|
.disconnect_pcie_paths = icm_disconnect_pcie_paths,
|
|
};
|
|
|
|
struct tb *icm_probe(struct tb_nhi *nhi)
|
|
{
|
|
struct icm *icm;
|
|
struct tb *tb;
|
|
|
|
tb = tb_domain_alloc(nhi, sizeof(struct icm));
|
|
if (!tb)
|
|
return NULL;
|
|
|
|
icm = tb_priv(tb);
|
|
INIT_DELAYED_WORK(&icm->rescan_work, icm_rescan_work);
|
|
mutex_init(&icm->request_lock);
|
|
|
|
switch (nhi->pdev->device) {
|
|
case PCI_DEVICE_ID_INTEL_FALCON_RIDGE_2C_NHI:
|
|
case PCI_DEVICE_ID_INTEL_FALCON_RIDGE_4C_NHI:
|
|
icm->is_supported = icm_fr_is_supported;
|
|
icm->get_route = icm_fr_get_route;
|
|
icm->device_connected = icm_fr_device_connected;
|
|
icm->device_disconnected = icm_fr_device_disconnected;
|
|
tb->cm_ops = &icm_fr_ops;
|
|
break;
|
|
|
|
case PCI_DEVICE_ID_INTEL_ALPINE_RIDGE_2C_NHI:
|
|
case PCI_DEVICE_ID_INTEL_ALPINE_RIDGE_4C_NHI:
|
|
case PCI_DEVICE_ID_INTEL_ALPINE_RIDGE_LP_NHI:
|
|
case PCI_DEVICE_ID_INTEL_ALPINE_RIDGE_C_4C_NHI:
|
|
case PCI_DEVICE_ID_INTEL_ALPINE_RIDGE_C_2C_NHI:
|
|
icm->is_supported = icm_ar_is_supported;
|
|
icm->get_mode = icm_ar_get_mode;
|
|
icm->get_route = icm_ar_get_route;
|
|
icm->device_connected = icm_fr_device_connected;
|
|
icm->device_disconnected = icm_fr_device_disconnected;
|
|
tb->cm_ops = &icm_fr_ops;
|
|
break;
|
|
}
|
|
|
|
if (!icm->is_supported || !icm->is_supported(tb)) {
|
|
dev_dbg(&nhi->pdev->dev, "ICM not supported on this controller\n");
|
|
tb_domain_put(tb);
|
|
return NULL;
|
|
}
|
|
|
|
return tb;
|
|
}
|