303 lines
7.3 KiB
C
303 lines
7.3 KiB
C
// SPDX-License-Identifier: GPL-2.0
|
|
/*
|
|
* Copyright (c) 2019, The Linux Foundation. All rights reserved.
|
|
*/
|
|
|
|
#include <linux/delay.h>
|
|
#include <linux/module.h>
|
|
#include <linux/of_device.h>
|
|
#include <linux/gpio/consumer.h>
|
|
#include <linux/regulator/consumer.h>
|
|
|
|
#include <video/mipi_display.h>
|
|
|
|
#include <drm/drm_mipi_dsi.h>
|
|
#include <drm/drm_modes.h>
|
|
#include <drm/drm_panel.h>
|
|
#include <drm/drm_print.h>
|
|
|
|
struct visionox_rm69299 {
|
|
struct drm_panel panel;
|
|
struct regulator_bulk_data supplies[2];
|
|
struct gpio_desc *reset_gpio;
|
|
struct mipi_dsi_device *dsi;
|
|
bool prepared;
|
|
bool enabled;
|
|
};
|
|
|
|
static inline struct visionox_rm69299 *panel_to_ctx(struct drm_panel *panel)
|
|
{
|
|
return container_of(panel, struct visionox_rm69299, panel);
|
|
}
|
|
|
|
static int visionox_rm69299_power_on(struct visionox_rm69299 *ctx)
|
|
{
|
|
int ret;
|
|
|
|
ret = regulator_bulk_enable(ARRAY_SIZE(ctx->supplies), ctx->supplies);
|
|
if (ret < 0)
|
|
return ret;
|
|
|
|
/*
|
|
* Reset sequence of visionox panel requires the panel to be
|
|
* out of reset for 10ms, followed by being held in reset
|
|
* for 10ms and then out again
|
|
*/
|
|
gpiod_set_value(ctx->reset_gpio, 1);
|
|
usleep_range(10000, 20000);
|
|
gpiod_set_value(ctx->reset_gpio, 0);
|
|
usleep_range(10000, 20000);
|
|
gpiod_set_value(ctx->reset_gpio, 1);
|
|
usleep_range(10000, 20000);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int visionox_rm69299_power_off(struct visionox_rm69299 *ctx)
|
|
{
|
|
gpiod_set_value(ctx->reset_gpio, 0);
|
|
|
|
return regulator_bulk_disable(ARRAY_SIZE(ctx->supplies), ctx->supplies);
|
|
}
|
|
|
|
static int visionox_rm69299_unprepare(struct drm_panel *panel)
|
|
{
|
|
struct visionox_rm69299 *ctx = panel_to_ctx(panel);
|
|
int ret;
|
|
|
|
ctx->dsi->mode_flags = 0;
|
|
|
|
ret = mipi_dsi_dcs_write(ctx->dsi, MIPI_DCS_SET_DISPLAY_OFF, NULL, 0);
|
|
if (ret < 0)
|
|
DRM_DEV_ERROR(ctx->panel.dev,
|
|
"set_display_off cmd failed ret = %d\n", ret);
|
|
|
|
/* 120ms delay required here as per DCS spec */
|
|
msleep(120);
|
|
|
|
ret = mipi_dsi_dcs_write(ctx->dsi, MIPI_DCS_ENTER_SLEEP_MODE, NULL, 0);
|
|
if (ret < 0) {
|
|
DRM_DEV_ERROR(ctx->panel.dev,
|
|
"enter_sleep cmd failed ret = %d\n", ret);
|
|
}
|
|
|
|
ret = visionox_rm69299_power_off(ctx);
|
|
|
|
ctx->prepared = false;
|
|
return ret;
|
|
}
|
|
|
|
static int visionox_rm69299_prepare(struct drm_panel *panel)
|
|
{
|
|
struct visionox_rm69299 *ctx = panel_to_ctx(panel);
|
|
int ret;
|
|
|
|
if (ctx->prepared)
|
|
return 0;
|
|
|
|
ret = visionox_rm69299_power_on(ctx);
|
|
if (ret < 0)
|
|
return ret;
|
|
|
|
ctx->dsi->mode_flags |= MIPI_DSI_MODE_LPM;
|
|
|
|
ret = mipi_dsi_dcs_write_buffer(ctx->dsi, (u8[]) { 0xfe, 0x00 }, 2);
|
|
if (ret < 0) {
|
|
DRM_DEV_ERROR(ctx->panel.dev,
|
|
"cmd set tx 0 failed, ret = %d\n", ret);
|
|
goto power_off;
|
|
}
|
|
|
|
ret = mipi_dsi_dcs_write_buffer(ctx->dsi, (u8[]) { 0xc2, 0x08 }, 2);
|
|
if (ret < 0) {
|
|
DRM_DEV_ERROR(ctx->panel.dev,
|
|
"cmd set tx 1 failed, ret = %d\n", ret);
|
|
goto power_off;
|
|
}
|
|
|
|
ret = mipi_dsi_dcs_write_buffer(ctx->dsi, (u8[]) { 0x35, 0x00 }, 2);
|
|
if (ret < 0) {
|
|
DRM_DEV_ERROR(ctx->panel.dev,
|
|
"cmd set tx 2 failed, ret = %d\n", ret);
|
|
goto power_off;
|
|
}
|
|
|
|
ret = mipi_dsi_dcs_write_buffer(ctx->dsi, (u8[]) { 0x51, 0xff }, 2);
|
|
if (ret < 0) {
|
|
DRM_DEV_ERROR(ctx->panel.dev,
|
|
"cmd set tx 3 failed, ret = %d\n", ret);
|
|
goto power_off;
|
|
}
|
|
|
|
ret = mipi_dsi_dcs_write(ctx->dsi, MIPI_DCS_EXIT_SLEEP_MODE, NULL, 0);
|
|
if (ret < 0) {
|
|
DRM_DEV_ERROR(ctx->panel.dev,
|
|
"exit_sleep_mode cmd failed ret = %d\n", ret);
|
|
goto power_off;
|
|
}
|
|
|
|
/* Per DSI spec wait 120ms after sending exit sleep DCS command */
|
|
msleep(120);
|
|
|
|
ret = mipi_dsi_dcs_write(ctx->dsi, MIPI_DCS_SET_DISPLAY_ON, NULL, 0);
|
|
if (ret < 0) {
|
|
DRM_DEV_ERROR(ctx->panel.dev,
|
|
"set_display_on cmd failed ret = %d\n", ret);
|
|
goto power_off;
|
|
}
|
|
|
|
/* Per DSI spec wait 120ms after sending set_display_on DCS command */
|
|
msleep(120);
|
|
|
|
ctx->prepared = true;
|
|
|
|
return 0;
|
|
|
|
power_off:
|
|
return ret;
|
|
}
|
|
|
|
static const struct drm_display_mode visionox_rm69299_1080x2248_60hz = {
|
|
.name = "1080x2248",
|
|
.clock = 158695,
|
|
.hdisplay = 1080,
|
|
.hsync_start = 1080 + 26,
|
|
.hsync_end = 1080 + 26 + 2,
|
|
.htotal = 1080 + 26 + 2 + 36,
|
|
.vdisplay = 2248,
|
|
.vsync_start = 2248 + 56,
|
|
.vsync_end = 2248 + 56 + 4,
|
|
.vtotal = 2248 + 56 + 4 + 4,
|
|
.flags = 0,
|
|
};
|
|
|
|
static int visionox_rm69299_get_modes(struct drm_panel *panel,
|
|
struct drm_connector *connector)
|
|
{
|
|
struct visionox_rm69299 *ctx = panel_to_ctx(panel);
|
|
struct drm_display_mode *mode;
|
|
|
|
mode = drm_mode_create(connector->dev);
|
|
if (!mode) {
|
|
DRM_DEV_ERROR(ctx->panel.dev,
|
|
"failed to create a new display mode\n");
|
|
return 0;
|
|
}
|
|
|
|
connector->display_info.width_mm = 74;
|
|
connector->display_info.height_mm = 131;
|
|
drm_mode_copy(mode, &visionox_rm69299_1080x2248_60hz);
|
|
mode->type = DRM_MODE_TYPE_DRIVER | DRM_MODE_TYPE_PREFERRED;
|
|
drm_mode_probed_add(connector, mode);
|
|
|
|
return 1;
|
|
}
|
|
|
|
static const struct drm_panel_funcs visionox_rm69299_drm_funcs = {
|
|
.unprepare = visionox_rm69299_unprepare,
|
|
.prepare = visionox_rm69299_prepare,
|
|
.get_modes = visionox_rm69299_get_modes,
|
|
};
|
|
|
|
static int visionox_rm69299_probe(struct mipi_dsi_device *dsi)
|
|
{
|
|
struct device *dev = &dsi->dev;
|
|
struct visionox_rm69299 *ctx;
|
|
int ret;
|
|
|
|
ctx = devm_kzalloc(dev, sizeof(*ctx), GFP_KERNEL);
|
|
if (!ctx)
|
|
return -ENOMEM;
|
|
|
|
mipi_dsi_set_drvdata(dsi, ctx);
|
|
|
|
ctx->panel.dev = dev;
|
|
ctx->dsi = dsi;
|
|
|
|
ctx->supplies[0].supply = "vdda";
|
|
ctx->supplies[1].supply = "vdd3p3";
|
|
|
|
ret = devm_regulator_bulk_get(ctx->panel.dev, ARRAY_SIZE(ctx->supplies),
|
|
ctx->supplies);
|
|
if (ret < 0)
|
|
return ret;
|
|
|
|
ctx->reset_gpio = devm_gpiod_get(ctx->panel.dev,
|
|
"reset", GPIOD_OUT_LOW);
|
|
if (IS_ERR(ctx->reset_gpio)) {
|
|
DRM_DEV_ERROR(dev, "cannot get reset gpio %ld\n",
|
|
PTR_ERR(ctx->reset_gpio));
|
|
return PTR_ERR(ctx->reset_gpio);
|
|
}
|
|
|
|
drm_panel_init(&ctx->panel, dev, &visionox_rm69299_drm_funcs,
|
|
DRM_MODE_CONNECTOR_DSI);
|
|
ctx->panel.dev = dev;
|
|
ctx->panel.funcs = &visionox_rm69299_drm_funcs;
|
|
drm_panel_add(&ctx->panel);
|
|
|
|
dsi->lanes = 4;
|
|
dsi->format = MIPI_DSI_FMT_RGB888;
|
|
dsi->mode_flags = MIPI_DSI_MODE_VIDEO | MIPI_DSI_MODE_LPM |
|
|
MIPI_DSI_CLOCK_NON_CONTINUOUS;
|
|
ret = mipi_dsi_attach(dsi);
|
|
if (ret < 0) {
|
|
DRM_DEV_ERROR(dev, "dsi attach failed ret = %d\n", ret);
|
|
goto err_dsi_attach;
|
|
}
|
|
|
|
ret = regulator_set_load(ctx->supplies[0].consumer, 32000);
|
|
if (ret) {
|
|
DRM_DEV_ERROR(dev,
|
|
"regulator set load failed for vdda supply ret = %d\n",
|
|
ret);
|
|
goto err_set_load;
|
|
}
|
|
|
|
ret = regulator_set_load(ctx->supplies[1].consumer, 13200);
|
|
if (ret) {
|
|
DRM_DEV_ERROR(dev,
|
|
"regulator set load failed for vdd3p3 supply ret = %d\n",
|
|
ret);
|
|
goto err_set_load;
|
|
}
|
|
|
|
return 0;
|
|
|
|
err_set_load:
|
|
mipi_dsi_detach(dsi);
|
|
err_dsi_attach:
|
|
drm_panel_remove(&ctx->panel);
|
|
return ret;
|
|
}
|
|
|
|
static int visionox_rm69299_remove(struct mipi_dsi_device *dsi)
|
|
{
|
|
struct visionox_rm69299 *ctx = mipi_dsi_get_drvdata(dsi);
|
|
|
|
mipi_dsi_detach(ctx->dsi);
|
|
mipi_dsi_device_unregister(ctx->dsi);
|
|
|
|
drm_panel_remove(&ctx->panel);
|
|
return 0;
|
|
}
|
|
|
|
static const struct of_device_id visionox_rm69299_of_match[] = {
|
|
{ .compatible = "visionox,rm69299-1080p-display", },
|
|
{ /* sentinel */ }
|
|
};
|
|
MODULE_DEVICE_TABLE(of, visionox_rm69299_of_match);
|
|
|
|
static struct mipi_dsi_driver visionox_rm69299_driver = {
|
|
.driver = {
|
|
.name = "panel-visionox-rm69299",
|
|
.of_match_table = visionox_rm69299_of_match,
|
|
},
|
|
.probe = visionox_rm69299_probe,
|
|
.remove = visionox_rm69299_remove,
|
|
};
|
|
module_mipi_dsi_driver(visionox_rm69299_driver);
|
|
|
|
MODULE_DESCRIPTION("Visionox RM69299 DSI Panel Driver");
|
|
MODULE_LICENSE("GPL v2");
|