OpenCloudOS-Kernel/drivers/net/wireless/ath/ath9k
Sujith Manoharan b380a43b52 ath9k: Fix ASPM for AR9462
If the L1 entrance latency is not calibrated properly
in the EEPROM in WB222 boards, there could be problems
in connectivity. Check and correct the calibrated value
if it doesn't match the optimal value for WB222, 4us.

Signed-off-by: Sujith Manoharan <c_manoha@qca.qualcomm.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2013-08-26 14:09:05 -04:00
..
Kconfig ath9k: make rfkill configurable 2013-07-22 16:54:26 -04:00
Makefile ath9k: Use minstrel rate control by default 2013-06-12 10:20:58 -04:00
ahb.c net: wireless: remove unnecessary platform_set_drvdata() 2013-05-27 22:34:52 -07:00
ani.c ath9k: Fix ANI for AP mode 2013-06-17 14:38:52 -04:00
ani.h ath9k: Fix ANI for AP mode 2013-06-17 14:38:52 -04:00
antenna.c ath9k: Remove ath_ant_comb_update() 2013-08-05 14:52:45 -04:00
ar955x_1p0_initvals.h ath9k_hw: Update initvals for QCA955x 2013-01-09 14:37:11 -05:00
ar5008_initvals.h ath9k: fix column header comments for some initval arrays 2013-01-07 15:16:53 -05:00
ar5008_phy.c ath9k_hw: Fix multicast search for AR9002 family 2013-07-18 16:22:00 -04:00
ar9001_initvals.h ath9k: fix column header comments for some initval arrays 2013-01-07 15:16:53 -05:00
ar9002_calib.c Show actual timeout value in failed calibration messages. 2013-03-27 13:39:08 -04:00
ar9002_hw.c ath9k: Enable WoW only for AR9462 2013-06-03 15:55:46 -04:00
ar9002_initvals.h ath9k: Enable WoW only for AR9462 2013-06-03 15:55:46 -04:00
ar9002_mac.c ath9k: Gather and report IRQ sync_cause errors. 2012-04-16 14:16:58 -04:00
ar9002_phy.c ath9k: Fix build failure 2013-08-09 15:57:53 -04:00
ar9002_phy.h ath9k: Program HW for WB195 diversity 2013-08-05 14:52:43 -04:00
ar9003_2p2_initvals.h Revert "ath9k_hw: Update rx gain initval to improve rx sensitivity" 2013-06-12 10:20:58 -04:00
ar9003_calib.c ath9k_hw: Enable manual peak calibration for AR9485 2013-05-17 14:31:08 -04:00
ar9003_eeprom.c ath9k: Add antenna diversity tweak for CUS198 2013-08-22 14:30:29 -04:00
ar9003_eeprom.h ath9k: Support ANT diversity for WB225 2013-08-05 14:52:45 -04:00
ar9003_hw.c ath9k: Fix ASPM for AR9462 2013-08-26 14:09:05 -04:00
ar9003_mac.c ath9k: Identify first subframe in an A-MPDU 2013-08-15 16:08:07 -04:00
ar9003_mac.h
ar9003_mci.c ath9k: Fix MCI reset in BT cal_req 2012-11-21 14:16:01 -05:00
ar9003_mci.h ath9k: Add new BT profile info A2DP_Voice 2012-10-29 15:19:30 -04:00
ar9003_paprd.c ath9k_hw: fix PA predistortion miscalibration 2013-05-29 15:22:42 -04:00
ar9003_phy.c ath9k: Add support for AR9485 1.2 2013-08-22 14:30:29 -04:00
ar9003_phy.h ath9k: Add antenna diversity tweak for CUS198 2013-08-22 14:30:29 -04:00
ar9003_rtt.c ath9k_hw: Fix RTT calibration 2012-05-15 17:27:55 -04:00
ar9003_rtt.h ath9k_hw: Fix RTT calibration 2012-05-15 17:27:55 -04:00
ar9330_1p1_initvals.h ath9k: de-duplicate initvals 2012-06-28 14:37:47 -04:00
ar9330_1p2_initvals.h ath9k: de-duplicate initvals 2012-06-28 14:37:47 -04:00
ar9340_initvals.h ath9k_hw: add tx gain tables for newer devices 2013-01-11 14:50:00 -05:00
ar9462_2p0_initvals.h ath9k: Add mix tx gain table for AR9462 2.0 2013-06-27 13:42:13 -04:00
ar9462_2p1_initvals.h ath9k: Add initvals for AR9462 2.1 2013-06-24 14:44:28 -04:00
ar9485_initvals.h ath9k_hw: Enable manual peak calibration for AR9485 2013-05-17 14:31:08 -04:00
ar9565_1p0_initvals.h ath9k: Update initvals for AR9565 2013-05-08 17:15:08 -04:00
ar9580_1p0_initvals.h ath9k_hw: change AR9580 initvals to fix a stability issue 2013-04-12 13:22:09 -04:00
ath9k.h ath9k: enable CSA functionality in ath9k 2013-08-16 14:17:50 -04:00
beacon.c ath9k: enable CSA functionality in ath9k 2013-08-16 14:17:50 -04:00
btcoex.c ath9k: stomp audio profiles on weak signal strength 2012-11-21 14:16:01 -05:00
btcoex.h ath9k: stomp audio profiles on weak signal strength 2012-11-21 14:16:01 -05:00
calib.c ath9k: Do not assign noise for NULL caldata 2013-06-12 15:06:55 -04:00
calib.h ath9k_hw: make various ar5416/ar91xx rf banks const 2013-04-10 14:10:32 -04:00
common.c ath9k: use chandef instead of channel_type 2013-08-16 14:17:47 -04:00
common.h ath9k: use chandef instead of channel_type 2013-08-16 14:17:47 -04:00
debug.c ath9k: simplify debugfs chainmask handling 2013-08-15 16:07:58 -04:00
debug.h ath9k: remove ath9k_sta_remove_debugfs 2013-08-15 16:07:57 -04:00
dfs.c ath9k: change DFS logging to use ath_dbg() 2013-04-22 15:17:40 -04:00
dfs.h
dfs_debug.c net: wireless: replace strict_strtoul() with kstrtoul() 2013-06-03 00:39:46 -07:00
dfs_debug.h ath9k: extend DFS detector stats in dfs_debugfs 2012-04-23 15:37:41 -04:00
dfs_pattern_detector.c Merge branch 'master' of git://git.kernel.org/pub/scm/linux/kernel/git/linville/wireless 2013-04-23 14:09:39 -04:00
dfs_pattern_detector.h ath9k: change DFS logging to use ath_dbg() 2013-04-22 15:17:40 -04:00
dfs_pri_detector.c Merge branch 'master' of git://git.kernel.org/pub/scm/linux/kernel/git/linville/wireless 2013-04-23 14:09:39 -04:00
dfs_pri_detector.h ath9k: change DFS logging to use ath_dbg() 2013-04-22 15:17:40 -04:00
eeprom.c ath9k: allow to load EEPROM content via firmware API 2012-12-10 15:49:57 -05:00
eeprom.h ath9k: use 'struct ath_hw *' as the first argument for 'ath9k_hw_nvram_read' 2012-12-10 15:49:56 -05:00
eeprom_4k.c ath9k: Fix diversity combining for AR9285 2013-07-24 11:02:39 -04:00
eeprom_9287.c ath9k: use 'struct ath_hw *' as the first argument for 'ath9k_hw_nvram_read' 2012-12-10 15:49:56 -05:00
eeprom_def.c ath9k: use 'struct ath_hw *' as the first argument for 'ath9k_hw_nvram_read' 2012-12-10 15:49:56 -05:00
gpio.c ath9k/ath9k_htc: Remove WME macros 2012-11-21 14:16:02 -05:00
hif_usb.c ath9k_htc: do not use bulk on EP3 and EP4 2013-08-15 16:08:00 -04:00
hif_usb.h wireless: ath9k-htc: only load firmware in need 2012-09-07 15:03:36 -04:00
htc.h ath9k_htc: Add ethtool stats support. 2013-06-24 14:44:23 -04:00
htc_drv_beacon.c ath9k_htc: Add support for mesh interfaces 2013-05-22 15:05:33 -04:00
htc_drv_debug.c Merge branch 'master' of git://git.kernel.org/pub/scm/linux/kernel/git/linville/wireless-next into for-davem 2013-06-28 13:18:21 -04:00
htc_drv_gpio.c ath9k/ath9k_htc: Remove WME macros 2012-11-21 14:16:02 -05:00
htc_drv_init.c ath9k_htc: do some initial hardware configuration 2013-07-22 16:04:07 -04:00
htc_drv_main.c ath9k: use chandef instead of channel_type 2013-08-16 14:17:47 -04:00
htc_drv_txrx.c ath9k_htc: Add support for mesh interfaces 2013-05-22 15:05:33 -04:00
htc_hst.c ath9k_htc: Fix memory leak 2013-01-11 14:12:01 -05:00
htc_hst.h
hw-ops.h ath9k: Fix build failure 2013-08-09 15:57:53 -04:00
hw.c ath9k: always use SIFS times from OFDM for 5/10 MHz 2013-08-16 14:17:47 -04:00
hw.h ath9k: Fix ASPM for AR9462 2013-08-26 14:09:05 -04:00
init.c ath9k: Add antenna diversity tweak for CUS198 2013-08-22 14:30:29 -04:00
link.c ath9k: Simplify ANI initialization 2013-06-03 15:55:47 -04:00
mac.c ath9k: Identify first subframe in an A-MPDU 2013-08-15 16:08:07 -04:00
mac.h ath9k: Identify first subframe in an A-MPDU 2013-08-15 16:08:07 -04:00
main.c ath9k: enable CSA functionality in ath9k 2013-08-16 14:17:50 -04:00
mci.c ath9k: Remove unused variables in ath_mci_cleanup 2013-02-01 14:27:24 -05:00
mci.h ath9k: Add new BT profile info A2DP_Voice 2012-10-29 15:19:30 -04:00
pci.c ath9k: Fix ASPM for AR9462 2013-08-26 14:09:05 -04:00
phy.h ath9k: Fix diversity combining for AR9285 2013-07-24 11:02:39 -04:00
rc.c ath9k: set 5/10 MHz supported channels and fix bitrate 2013-08-16 14:17:48 -04:00
rc.h ath9k: Use minstrel rate control by default 2013-06-12 10:20:58 -04:00
recv.c ath9k: report 5/10 MHz channels 2013-08-16 14:17:48 -04:00
reg.h ath9k: Add support for AR9485 1.2 2013-08-22 14:30:29 -04:00
wmi.c
wmi.h
wow.c ath9k: Enable WoW only for AR9462 2013-06-03 15:55:46 -04:00
xmit.c ath9k: enable CSA functionality in ath9k 2013-08-16 14:17:50 -04:00