462 lines
13 KiB
C
462 lines
13 KiB
C
/*
|
|
* MXC GPIO support. (c) 2008 Daniel Mack <daniel@caiaq.de>
|
|
* Copyright 2008 Juergen Beisert, kernel@pengutronix.de
|
|
*
|
|
* Based on code from Freescale,
|
|
* Copyright (C) 2004-2010 Freescale Semiconductor, Inc. All Rights Reserved.
|
|
*
|
|
* This program is free software; you can redistribute it and/or
|
|
* modify it under the terms of the GNU General Public License
|
|
* as published by the Free Software Foundation; either version 2
|
|
* of the License, or (at your option) any later version.
|
|
* This program is distributed in the hope that it will be useful,
|
|
* but WITHOUT ANY WARRANTY; without even the implied warranty of
|
|
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
|
* GNU General Public License for more details.
|
|
*
|
|
* You should have received a copy of the GNU General Public License
|
|
* along with this program; if not, write to the Free Software
|
|
* Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301, USA.
|
|
*/
|
|
|
|
#include <linux/init.h>
|
|
#include <linux/interrupt.h>
|
|
#include <linux/io.h>
|
|
#include <linux/irq.h>
|
|
#include <linux/gpio.h>
|
|
#include <mach/hardware.h>
|
|
#include <asm-generic/bug.h>
|
|
|
|
static struct mxc_gpio_port *mxc_gpio_ports;
|
|
static int gpio_table_size;
|
|
|
|
#define cpu_is_mx1_mx2() (cpu_is_mx1() || cpu_is_mx2())
|
|
|
|
#define GPIO_DR (cpu_is_mx1_mx2() ? 0x1c : 0x00)
|
|
#define GPIO_GDIR (cpu_is_mx1_mx2() ? 0x00 : 0x04)
|
|
#define GPIO_PSR (cpu_is_mx1_mx2() ? 0x24 : 0x08)
|
|
#define GPIO_ICR1 (cpu_is_mx1_mx2() ? 0x28 : 0x0C)
|
|
#define GPIO_ICR2 (cpu_is_mx1_mx2() ? 0x2C : 0x10)
|
|
#define GPIO_IMR (cpu_is_mx1_mx2() ? 0x30 : 0x14)
|
|
#define GPIO_ISR (cpu_is_mx1_mx2() ? 0x34 : 0x18)
|
|
|
|
#define GPIO_INT_LOW_LEV (cpu_is_mx1_mx2() ? 0x3 : 0x0)
|
|
#define GPIO_INT_HIGH_LEV (cpu_is_mx1_mx2() ? 0x2 : 0x1)
|
|
#define GPIO_INT_RISE_EDGE (cpu_is_mx1_mx2() ? 0x0 : 0x2)
|
|
#define GPIO_INT_FALL_EDGE (cpu_is_mx1_mx2() ? 0x1 : 0x3)
|
|
#define GPIO_INT_NONE 0x4
|
|
|
|
/* Note: This driver assumes 32 GPIOs are handled in one register */
|
|
|
|
static void _clear_gpio_irqstatus(struct mxc_gpio_port *port, u32 index)
|
|
{
|
|
__raw_writel(1 << index, port->base + GPIO_ISR);
|
|
}
|
|
|
|
static void _set_gpio_irqenable(struct mxc_gpio_port *port, u32 index,
|
|
int enable)
|
|
{
|
|
u32 l;
|
|
|
|
l = __raw_readl(port->base + GPIO_IMR);
|
|
l = (l & (~(1 << index))) | (!!enable << index);
|
|
__raw_writel(l, port->base + GPIO_IMR);
|
|
}
|
|
|
|
static void gpio_ack_irq(struct irq_data *d)
|
|
{
|
|
u32 gpio = irq_to_gpio(d->irq);
|
|
_clear_gpio_irqstatus(&mxc_gpio_ports[gpio / 32], gpio & 0x1f);
|
|
}
|
|
|
|
static void gpio_mask_irq(struct irq_data *d)
|
|
{
|
|
u32 gpio = irq_to_gpio(d->irq);
|
|
_set_gpio_irqenable(&mxc_gpio_ports[gpio / 32], gpio & 0x1f, 0);
|
|
}
|
|
|
|
static void gpio_unmask_irq(struct irq_data *d)
|
|
{
|
|
u32 gpio = irq_to_gpio(d->irq);
|
|
_set_gpio_irqenable(&mxc_gpio_ports[gpio / 32], gpio & 0x1f, 1);
|
|
}
|
|
|
|
static int mxc_gpio_get(struct gpio_chip *chip, unsigned offset);
|
|
|
|
static int gpio_set_irq_type(struct irq_data *d, u32 type)
|
|
{
|
|
u32 gpio = irq_to_gpio(d->irq);
|
|
struct mxc_gpio_port *port = &mxc_gpio_ports[gpio / 32];
|
|
u32 bit, val;
|
|
int edge;
|
|
void __iomem *reg = port->base;
|
|
|
|
port->both_edges &= ~(1 << (gpio & 31));
|
|
switch (type) {
|
|
case IRQ_TYPE_EDGE_RISING:
|
|
edge = GPIO_INT_RISE_EDGE;
|
|
break;
|
|
case IRQ_TYPE_EDGE_FALLING:
|
|
edge = GPIO_INT_FALL_EDGE;
|
|
break;
|
|
case IRQ_TYPE_EDGE_BOTH:
|
|
val = mxc_gpio_get(&port->chip, gpio & 31);
|
|
if (val) {
|
|
edge = GPIO_INT_LOW_LEV;
|
|
pr_debug("mxc: set GPIO %d to low trigger\n", gpio);
|
|
} else {
|
|
edge = GPIO_INT_HIGH_LEV;
|
|
pr_debug("mxc: set GPIO %d to high trigger\n", gpio);
|
|
}
|
|
port->both_edges |= 1 << (gpio & 31);
|
|
break;
|
|
case IRQ_TYPE_LEVEL_LOW:
|
|
edge = GPIO_INT_LOW_LEV;
|
|
break;
|
|
case IRQ_TYPE_LEVEL_HIGH:
|
|
edge = GPIO_INT_HIGH_LEV;
|
|
break;
|
|
default:
|
|
return -EINVAL;
|
|
}
|
|
|
|
reg += GPIO_ICR1 + ((gpio & 0x10) >> 2); /* lower or upper register */
|
|
bit = gpio & 0xf;
|
|
val = __raw_readl(reg) & ~(0x3 << (bit << 1));
|
|
__raw_writel(val | (edge << (bit << 1)), reg);
|
|
_clear_gpio_irqstatus(port, gpio & 0x1f);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static void mxc_flip_edge(struct mxc_gpio_port *port, u32 gpio)
|
|
{
|
|
void __iomem *reg = port->base;
|
|
u32 bit, val;
|
|
int edge;
|
|
|
|
reg += GPIO_ICR1 + ((gpio & 0x10) >> 2); /* lower or upper register */
|
|
bit = gpio & 0xf;
|
|
val = __raw_readl(reg);
|
|
edge = (val >> (bit << 1)) & 3;
|
|
val &= ~(0x3 << (bit << 1));
|
|
if (edge == GPIO_INT_HIGH_LEV) {
|
|
edge = GPIO_INT_LOW_LEV;
|
|
pr_debug("mxc: switch GPIO %d to low trigger\n", gpio);
|
|
} else if (edge == GPIO_INT_LOW_LEV) {
|
|
edge = GPIO_INT_HIGH_LEV;
|
|
pr_debug("mxc: switch GPIO %d to high trigger\n", gpio);
|
|
} else {
|
|
pr_err("mxc: invalid configuration for GPIO %d: %x\n",
|
|
gpio, edge);
|
|
return;
|
|
}
|
|
__raw_writel(val | (edge << (bit << 1)), reg);
|
|
}
|
|
|
|
/* handle 32 interrupts in one status register */
|
|
static void mxc_gpio_irq_handler(struct mxc_gpio_port *port, u32 irq_stat)
|
|
{
|
|
u32 gpio_irq_no_base = port->virtual_irq_start;
|
|
|
|
while (irq_stat != 0) {
|
|
int irqoffset = fls(irq_stat) - 1;
|
|
|
|
if (port->both_edges & (1 << irqoffset))
|
|
mxc_flip_edge(port, irqoffset);
|
|
|
|
generic_handle_irq(gpio_irq_no_base + irqoffset);
|
|
|
|
irq_stat &= ~(1 << irqoffset);
|
|
}
|
|
}
|
|
|
|
/* MX1 and MX3 has one interrupt *per* gpio port */
|
|
static void mx3_gpio_irq_handler(u32 irq, struct irq_desc *desc)
|
|
{
|
|
u32 irq_stat;
|
|
struct mxc_gpio_port *port = get_irq_data(irq);
|
|
|
|
irq_stat = __raw_readl(port->base + GPIO_ISR) &
|
|
__raw_readl(port->base + GPIO_IMR);
|
|
|
|
mxc_gpio_irq_handler(port, irq_stat);
|
|
}
|
|
|
|
/* MX2 has one interrupt *for all* gpio ports */
|
|
static void mx2_gpio_irq_handler(u32 irq, struct irq_desc *desc)
|
|
{
|
|
int i;
|
|
u32 irq_msk, irq_stat;
|
|
struct mxc_gpio_port *port = get_irq_data(irq);
|
|
|
|
/* walk through all interrupt status registers */
|
|
for (i = 0; i < gpio_table_size; i++) {
|
|
irq_msk = __raw_readl(port[i].base + GPIO_IMR);
|
|
if (!irq_msk)
|
|
continue;
|
|
|
|
irq_stat = __raw_readl(port[i].base + GPIO_ISR) & irq_msk;
|
|
if (irq_stat)
|
|
mxc_gpio_irq_handler(&port[i], irq_stat);
|
|
}
|
|
}
|
|
|
|
/*
|
|
* Set interrupt number "irq" in the GPIO as a wake-up source.
|
|
* While system is running, all registered GPIO interrupts need to have
|
|
* wake-up enabled. When system is suspended, only selected GPIO interrupts
|
|
* need to have wake-up enabled.
|
|
* @param irq interrupt source number
|
|
* @param enable enable as wake-up if equal to non-zero
|
|
* @return This function returns 0 on success.
|
|
*/
|
|
static int gpio_set_wake_irq(struct irq_data *d, u32 enable)
|
|
{
|
|
u32 gpio = irq_to_gpio(d->irq);
|
|
u32 gpio_idx = gpio & 0x1F;
|
|
struct mxc_gpio_port *port = &mxc_gpio_ports[gpio / 32];
|
|
|
|
if (enable) {
|
|
if (port->irq_high && (gpio_idx >= 16))
|
|
enable_irq_wake(port->irq_high);
|
|
else
|
|
enable_irq_wake(port->irq);
|
|
} else {
|
|
if (port->irq_high && (gpio_idx >= 16))
|
|
disable_irq_wake(port->irq_high);
|
|
else
|
|
disable_irq_wake(port->irq);
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
static struct irq_chip gpio_irq_chip = {
|
|
.irq_ack = gpio_ack_irq,
|
|
.irq_mask = gpio_mask_irq,
|
|
.irq_unmask = gpio_unmask_irq,
|
|
.irq_set_type = gpio_set_irq_type,
|
|
.irq_set_wake = gpio_set_wake_irq,
|
|
};
|
|
|
|
static void _set_gpio_direction(struct gpio_chip *chip, unsigned offset,
|
|
int dir)
|
|
{
|
|
struct mxc_gpio_port *port =
|
|
container_of(chip, struct mxc_gpio_port, chip);
|
|
u32 l;
|
|
unsigned long flags;
|
|
|
|
spin_lock_irqsave(&port->lock, flags);
|
|
l = __raw_readl(port->base + GPIO_GDIR);
|
|
if (dir)
|
|
l |= 1 << offset;
|
|
else
|
|
l &= ~(1 << offset);
|
|
__raw_writel(l, port->base + GPIO_GDIR);
|
|
spin_unlock_irqrestore(&port->lock, flags);
|
|
}
|
|
|
|
static void mxc_gpio_set(struct gpio_chip *chip, unsigned offset, int value)
|
|
{
|
|
struct mxc_gpio_port *port =
|
|
container_of(chip, struct mxc_gpio_port, chip);
|
|
void __iomem *reg = port->base + GPIO_DR;
|
|
u32 l;
|
|
unsigned long flags;
|
|
|
|
spin_lock_irqsave(&port->lock, flags);
|
|
l = (__raw_readl(reg) & (~(1 << offset))) | (!!value << offset);
|
|
__raw_writel(l, reg);
|
|
spin_unlock_irqrestore(&port->lock, flags);
|
|
}
|
|
|
|
static int mxc_gpio_get(struct gpio_chip *chip, unsigned offset)
|
|
{
|
|
struct mxc_gpio_port *port =
|
|
container_of(chip, struct mxc_gpio_port, chip);
|
|
|
|
return (__raw_readl(port->base + GPIO_PSR) >> offset) & 1;
|
|
}
|
|
|
|
static int mxc_gpio_direction_input(struct gpio_chip *chip, unsigned offset)
|
|
{
|
|
_set_gpio_direction(chip, offset, 0);
|
|
return 0;
|
|
}
|
|
|
|
static int mxc_gpio_direction_output(struct gpio_chip *chip,
|
|
unsigned offset, int value)
|
|
{
|
|
mxc_gpio_set(chip, offset, value);
|
|
_set_gpio_direction(chip, offset, 1);
|
|
return 0;
|
|
}
|
|
|
|
int __init mxc_gpio_init(struct mxc_gpio_port *port, int cnt)
|
|
{
|
|
int i, j;
|
|
|
|
/* save for local usage */
|
|
mxc_gpio_ports = port;
|
|
gpio_table_size = cnt;
|
|
|
|
printk(KERN_INFO "MXC GPIO hardware\n");
|
|
|
|
for (i = 0; i < cnt; i++) {
|
|
/* disable the interrupt and clear the status */
|
|
__raw_writel(0, port[i].base + GPIO_IMR);
|
|
__raw_writel(~0, port[i].base + GPIO_ISR);
|
|
for (j = port[i].virtual_irq_start;
|
|
j < port[i].virtual_irq_start + 32; j++) {
|
|
set_irq_chip(j, &gpio_irq_chip);
|
|
set_irq_handler(j, handle_level_irq);
|
|
set_irq_flags(j, IRQF_VALID);
|
|
}
|
|
|
|
/* register gpio chip */
|
|
port[i].chip.direction_input = mxc_gpio_direction_input;
|
|
port[i].chip.direction_output = mxc_gpio_direction_output;
|
|
port[i].chip.get = mxc_gpio_get;
|
|
port[i].chip.set = mxc_gpio_set;
|
|
port[i].chip.base = i * 32;
|
|
port[i].chip.ngpio = 32;
|
|
|
|
spin_lock_init(&port[i].lock);
|
|
|
|
/* its a serious configuration bug when it fails */
|
|
BUG_ON( gpiochip_add(&port[i].chip) < 0 );
|
|
|
|
if (cpu_is_mx1() || cpu_is_mx3() || cpu_is_mx25() || cpu_is_mx51()) {
|
|
/* setup one handler for each entry */
|
|
set_irq_chained_handler(port[i].irq, mx3_gpio_irq_handler);
|
|
set_irq_data(port[i].irq, &port[i]);
|
|
if (port[i].irq_high) {
|
|
/* setup handler for GPIO 16 to 31 */
|
|
set_irq_chained_handler(port[i].irq_high,
|
|
mx3_gpio_irq_handler);
|
|
set_irq_data(port[i].irq_high, &port[i]);
|
|
}
|
|
}
|
|
}
|
|
|
|
if (cpu_is_mx2()) {
|
|
/* setup one handler for all GPIO interrupts */
|
|
set_irq_chained_handler(port[0].irq, mx2_gpio_irq_handler);
|
|
set_irq_data(port[0].irq, port);
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
#define DEFINE_IMX_GPIO_PORT_IRQ_HIGH(soc, _id, _hwid, _irq, _irq_high) \
|
|
{ \
|
|
.chip.label = "gpio-" #_id, \
|
|
.irq = _irq, \
|
|
.irq_high = _irq_high, \
|
|
.base = soc ## _IO_ADDRESS( \
|
|
soc ## _GPIO ## _hwid ## _BASE_ADDR), \
|
|
.virtual_irq_start = MXC_GPIO_IRQ_START + (_id) * 32, \
|
|
}
|
|
|
|
#define DEFINE_IMX_GPIO_PORT_IRQ(soc, _id, _hwid, _irq) \
|
|
DEFINE_IMX_GPIO_PORT_IRQ_HIGH(soc, _id, _hwid, _irq, 0)
|
|
#define DEFINE_IMX_GPIO_PORT(soc, _id, _hwid) \
|
|
DEFINE_IMX_GPIO_PORT_IRQ(soc, _id, _hwid, 0)
|
|
|
|
#define DEFINE_REGISTER_FUNCTION(prefix) \
|
|
int __init prefix ## _register_gpios(void) \
|
|
{ \
|
|
return mxc_gpio_init(prefix ## _gpio_ports, \
|
|
ARRAY_SIZE(prefix ## _gpio_ports)); \
|
|
}
|
|
|
|
#if defined(CONFIG_SOC_IMX1)
|
|
static struct mxc_gpio_port imx1_gpio_ports[] = {
|
|
DEFINE_IMX_GPIO_PORT_IRQ(MX1, 0, 1, MX1_GPIO_INT_PORTA),
|
|
DEFINE_IMX_GPIO_PORT_IRQ(MX1, 1, 2, MX1_GPIO_INT_PORTB),
|
|
DEFINE_IMX_GPIO_PORT_IRQ(MX1, 2, 3, MX1_GPIO_INT_PORTC),
|
|
DEFINE_IMX_GPIO_PORT_IRQ(MX1, 3, 4, MX1_GPIO_INT_PORTD),
|
|
};
|
|
|
|
DEFINE_REGISTER_FUNCTION(imx1)
|
|
|
|
#endif /* if defined(CONFIG_SOC_IMX1) */
|
|
|
|
#if defined(CONFIG_SOC_IMX21)
|
|
static struct mxc_gpio_port imx21_gpio_ports[] = {
|
|
DEFINE_IMX_GPIO_PORT_IRQ(MX21, 0, 1, MX21_INT_GPIO),
|
|
DEFINE_IMX_GPIO_PORT(MX21, 1, 2),
|
|
DEFINE_IMX_GPIO_PORT(MX21, 2, 3),
|
|
DEFINE_IMX_GPIO_PORT(MX21, 3, 4),
|
|
DEFINE_IMX_GPIO_PORT(MX21, 4, 5),
|
|
DEFINE_IMX_GPIO_PORT(MX21, 5, 6),
|
|
};
|
|
|
|
DEFINE_REGISTER_FUNCTION(imx21)
|
|
|
|
#endif /* if defined(CONFIG_SOC_IMX21) */
|
|
|
|
#if defined(CONFIG_SOC_IMX25)
|
|
static struct mxc_gpio_port imx25_gpio_ports[] = {
|
|
DEFINE_IMX_GPIO_PORT_IRQ(MX25, 0, 1, MX25_INT_GPIO1),
|
|
DEFINE_IMX_GPIO_PORT_IRQ(MX25, 1, 2, MX25_INT_GPIO2),
|
|
DEFINE_IMX_GPIO_PORT_IRQ(MX25, 2, 3, MX25_INT_GPIO3),
|
|
DEFINE_IMX_GPIO_PORT_IRQ(MX25, 3, 4, MX25_INT_GPIO4),
|
|
};
|
|
|
|
DEFINE_REGISTER_FUNCTION(imx25)
|
|
|
|
#endif /* if defined(CONFIG_SOC_IMX25) */
|
|
|
|
#if defined(CONFIG_SOC_IMX27)
|
|
static struct mxc_gpio_port imx27_gpio_ports[] = {
|
|
DEFINE_IMX_GPIO_PORT_IRQ(MX27, 0, 1, MX27_INT_GPIO),
|
|
DEFINE_IMX_GPIO_PORT(MX27, 1, 2),
|
|
DEFINE_IMX_GPIO_PORT(MX27, 2, 3),
|
|
DEFINE_IMX_GPIO_PORT(MX27, 3, 4),
|
|
DEFINE_IMX_GPIO_PORT(MX27, 4, 5),
|
|
DEFINE_IMX_GPIO_PORT(MX27, 5, 6),
|
|
};
|
|
|
|
DEFINE_REGISTER_FUNCTION(imx27)
|
|
|
|
#endif /* if defined(CONFIG_SOC_IMX27) */
|
|
|
|
#if defined(CONFIG_SOC_IMX31)
|
|
static struct mxc_gpio_port imx31_gpio_ports[] = {
|
|
DEFINE_IMX_GPIO_PORT_IRQ(MX31, 0, 1, MX31_INT_GPIO1),
|
|
DEFINE_IMX_GPIO_PORT_IRQ(MX31, 1, 2, MX31_INT_GPIO2),
|
|
DEFINE_IMX_GPIO_PORT_IRQ(MX31, 2, 3, MX31_INT_GPIO3),
|
|
};
|
|
|
|
DEFINE_REGISTER_FUNCTION(imx31)
|
|
|
|
#endif /* if defined(CONFIG_SOC_IMX31) */
|
|
|
|
#if defined(CONFIG_SOC_IMX35)
|
|
static struct mxc_gpio_port imx35_gpio_ports[] = {
|
|
DEFINE_IMX_GPIO_PORT_IRQ(MX35, 0, 1, MX35_INT_GPIO1),
|
|
DEFINE_IMX_GPIO_PORT_IRQ(MX35, 1, 2, MX35_INT_GPIO2),
|
|
DEFINE_IMX_GPIO_PORT_IRQ(MX35, 2, 3, MX35_INT_GPIO3),
|
|
};
|
|
|
|
DEFINE_REGISTER_FUNCTION(imx35)
|
|
|
|
#endif /* if defined(CONFIG_SOC_IMX35) */
|
|
|
|
#if defined(CONFIG_SOC_IMX50)
|
|
static struct mxc_gpio_port imx50_gpio_ports[] = {
|
|
DEFINE_IMX_GPIO_PORT_IRQ_HIGH(MX50, 0, 1, MX50_INT_GPIO1_LOW, MX50_INT_GPIO1_HIGH),
|
|
DEFINE_IMX_GPIO_PORT_IRQ_HIGH(MX50, 1, 2, MX50_INT_GPIO2_LOW, MX50_INT_GPIO2_HIGH),
|
|
DEFINE_IMX_GPIO_PORT_IRQ_HIGH(MX50, 2, 3, MX50_INT_GPIO3_LOW, MX50_INT_GPIO3_HIGH),
|
|
DEFINE_IMX_GPIO_PORT_IRQ_HIGH(MX50, 3, 4, MX50_INT_GPIO3_LOW, MX50_INT_GPIO3_HIGH),
|
|
DEFINE_IMX_GPIO_PORT_IRQ_HIGH(MX50, 4, 5, MX50_INT_GPIO3_LOW, MX50_INT_GPIO3_HIGH),
|
|
DEFINE_IMX_GPIO_PORT_IRQ_HIGH(MX50, 5, 6, MX50_INT_GPIO3_LOW, MX50_INT_GPIO3_HIGH),
|
|
};
|
|
|
|
DEFINE_REGISTER_FUNCTION(imx50)
|
|
|
|
#endif /* if defined(CONFIG_SOC_IMX50) */
|