1051 lines
26 KiB
C
1051 lines
26 KiB
C
// SPDX-License-Identifier: GPL-2.0-only
|
|
/*
|
|
* CAN driver for PEAK System PCAN-USB Pro adapter
|
|
* Derived from the PCAN project file driver/src/pcan_usbpro.c
|
|
*
|
|
* Copyright (C) 2003-2011 PEAK System-Technik GmbH
|
|
* Copyright (C) 2011-2012 Stephane Grosjean <s.grosjean@peak-system.com>
|
|
*/
|
|
#include <linux/netdevice.h>
|
|
#include <linux/usb.h>
|
|
#include <linux/module.h>
|
|
|
|
#include <linux/can.h>
|
|
#include <linux/can/dev.h>
|
|
#include <linux/can/error.h>
|
|
|
|
#include "pcan_usb_core.h"
|
|
#include "pcan_usb_pro.h"
|
|
|
|
MODULE_SUPPORTED_DEVICE("PEAK-System PCAN-USB Pro adapter");
|
|
|
|
#define PCAN_USBPRO_CHANNEL_COUNT 2
|
|
|
|
/* PCAN-USB Pro adapter internal clock (MHz) */
|
|
#define PCAN_USBPRO_CRYSTAL_HZ 56000000
|
|
|
|
/* PCAN-USB Pro command timeout (ms.) */
|
|
#define PCAN_USBPRO_COMMAND_TIMEOUT 1000
|
|
|
|
/* PCAN-USB Pro rx/tx buffers size */
|
|
#define PCAN_USBPRO_RX_BUFFER_SIZE 1024
|
|
#define PCAN_USBPRO_TX_BUFFER_SIZE 64
|
|
|
|
#define PCAN_USBPRO_MSG_HEADER_LEN 4
|
|
|
|
/* some commands responses need to be re-submitted */
|
|
#define PCAN_USBPRO_RSP_SUBMIT_MAX 2
|
|
|
|
#define PCAN_USBPRO_RTR 0x01
|
|
#define PCAN_USBPRO_EXT 0x02
|
|
|
|
#define PCAN_USBPRO_CMD_BUFFER_SIZE 512
|
|
|
|
/* handle device specific info used by the netdevices */
|
|
struct pcan_usb_pro_interface {
|
|
struct peak_usb_device *dev[PCAN_USBPRO_CHANNEL_COUNT];
|
|
struct peak_time_ref time_ref;
|
|
int cm_ignore_count;
|
|
int dev_opened_count;
|
|
};
|
|
|
|
/* device information */
|
|
struct pcan_usb_pro_device {
|
|
struct peak_usb_device dev;
|
|
struct pcan_usb_pro_interface *usb_if;
|
|
u32 cached_ccbt;
|
|
};
|
|
|
|
/* internal structure used to handle messages sent to bulk urb */
|
|
struct pcan_usb_pro_msg {
|
|
u8 *rec_ptr;
|
|
int rec_buffer_size;
|
|
int rec_buffer_len;
|
|
union {
|
|
__le16 *rec_cnt_rd;
|
|
__le32 *rec_cnt;
|
|
u8 *rec_buffer;
|
|
} u;
|
|
};
|
|
|
|
/* records sizes table indexed on message id. (8-bits value) */
|
|
static u16 pcan_usb_pro_sizeof_rec[256] = {
|
|
[PCAN_USBPRO_SETBTR] = sizeof(struct pcan_usb_pro_btr),
|
|
[PCAN_USBPRO_SETBUSACT] = sizeof(struct pcan_usb_pro_busact),
|
|
[PCAN_USBPRO_SETSILENT] = sizeof(struct pcan_usb_pro_silent),
|
|
[PCAN_USBPRO_SETFILTR] = sizeof(struct pcan_usb_pro_filter),
|
|
[PCAN_USBPRO_SETTS] = sizeof(struct pcan_usb_pro_setts),
|
|
[PCAN_USBPRO_GETDEVID] = sizeof(struct pcan_usb_pro_devid),
|
|
[PCAN_USBPRO_SETLED] = sizeof(struct pcan_usb_pro_setled),
|
|
[PCAN_USBPRO_RXMSG8] = sizeof(struct pcan_usb_pro_rxmsg),
|
|
[PCAN_USBPRO_RXMSG4] = sizeof(struct pcan_usb_pro_rxmsg) - 4,
|
|
[PCAN_USBPRO_RXMSG0] = sizeof(struct pcan_usb_pro_rxmsg) - 8,
|
|
[PCAN_USBPRO_RXRTR] = sizeof(struct pcan_usb_pro_rxmsg) - 8,
|
|
[PCAN_USBPRO_RXSTATUS] = sizeof(struct pcan_usb_pro_rxstatus),
|
|
[PCAN_USBPRO_RXTS] = sizeof(struct pcan_usb_pro_rxts),
|
|
[PCAN_USBPRO_TXMSG8] = sizeof(struct pcan_usb_pro_txmsg),
|
|
[PCAN_USBPRO_TXMSG4] = sizeof(struct pcan_usb_pro_txmsg) - 4,
|
|
[PCAN_USBPRO_TXMSG0] = sizeof(struct pcan_usb_pro_txmsg) - 8,
|
|
};
|
|
|
|
/*
|
|
* initialize PCAN-USB Pro message data structure
|
|
*/
|
|
static u8 *pcan_msg_init(struct pcan_usb_pro_msg *pm, void *buffer_addr,
|
|
int buffer_size)
|
|
{
|
|
if (buffer_size < PCAN_USBPRO_MSG_HEADER_LEN)
|
|
return NULL;
|
|
|
|
pm->u.rec_buffer = (u8 *)buffer_addr;
|
|
pm->rec_buffer_size = pm->rec_buffer_len = buffer_size;
|
|
pm->rec_ptr = pm->u.rec_buffer + PCAN_USBPRO_MSG_HEADER_LEN;
|
|
|
|
return pm->rec_ptr;
|
|
}
|
|
|
|
static u8 *pcan_msg_init_empty(struct pcan_usb_pro_msg *pm,
|
|
void *buffer_addr, int buffer_size)
|
|
{
|
|
u8 *pr = pcan_msg_init(pm, buffer_addr, buffer_size);
|
|
|
|
if (pr) {
|
|
pm->rec_buffer_len = PCAN_USBPRO_MSG_HEADER_LEN;
|
|
*pm->u.rec_cnt = 0;
|
|
}
|
|
return pr;
|
|
}
|
|
|
|
/*
|
|
* add one record to a message being built
|
|
*/
|
|
static int pcan_msg_add_rec(struct pcan_usb_pro_msg *pm, int id, ...)
|
|
{
|
|
int len, i;
|
|
u8 *pc;
|
|
va_list ap;
|
|
|
|
va_start(ap, id);
|
|
|
|
pc = pm->rec_ptr + 1;
|
|
|
|
i = 0;
|
|
switch (id) {
|
|
case PCAN_USBPRO_TXMSG8:
|
|
i += 4;
|
|
/* fall through */
|
|
case PCAN_USBPRO_TXMSG4:
|
|
i += 4;
|
|
/* fall through */
|
|
case PCAN_USBPRO_TXMSG0:
|
|
*pc++ = va_arg(ap, int);
|
|
*pc++ = va_arg(ap, int);
|
|
*pc++ = va_arg(ap, int);
|
|
*(__le32 *)pc = cpu_to_le32(va_arg(ap, u32));
|
|
pc += 4;
|
|
memcpy(pc, va_arg(ap, int *), i);
|
|
pc += i;
|
|
break;
|
|
|
|
case PCAN_USBPRO_SETBTR:
|
|
case PCAN_USBPRO_GETDEVID:
|
|
*pc++ = va_arg(ap, int);
|
|
pc += 2;
|
|
*(__le32 *)pc = cpu_to_le32(va_arg(ap, u32));
|
|
pc += 4;
|
|
break;
|
|
|
|
case PCAN_USBPRO_SETFILTR:
|
|
case PCAN_USBPRO_SETBUSACT:
|
|
case PCAN_USBPRO_SETSILENT:
|
|
*pc++ = va_arg(ap, int);
|
|
*(__le16 *)pc = cpu_to_le16(va_arg(ap, int));
|
|
pc += 2;
|
|
break;
|
|
|
|
case PCAN_USBPRO_SETLED:
|
|
*pc++ = va_arg(ap, int);
|
|
*(__le16 *)pc = cpu_to_le16(va_arg(ap, int));
|
|
pc += 2;
|
|
*(__le32 *)pc = cpu_to_le32(va_arg(ap, u32));
|
|
pc += 4;
|
|
break;
|
|
|
|
case PCAN_USBPRO_SETTS:
|
|
pc++;
|
|
*(__le16 *)pc = cpu_to_le16(va_arg(ap, int));
|
|
pc += 2;
|
|
break;
|
|
|
|
default:
|
|
pr_err("%s: %s(): unknown data type %02Xh (%d)\n",
|
|
PCAN_USB_DRIVER_NAME, __func__, id, id);
|
|
pc--;
|
|
break;
|
|
}
|
|
|
|
len = pc - pm->rec_ptr;
|
|
if (len > 0) {
|
|
*pm->u.rec_cnt = cpu_to_le32(le32_to_cpu(*pm->u.rec_cnt) + 1);
|
|
*pm->rec_ptr = id;
|
|
|
|
pm->rec_ptr = pc;
|
|
pm->rec_buffer_len += len;
|
|
}
|
|
|
|
va_end(ap);
|
|
|
|
return len;
|
|
}
|
|
|
|
/*
|
|
* send PCAN-USB Pro command synchronously
|
|
*/
|
|
static int pcan_usb_pro_send_cmd(struct peak_usb_device *dev,
|
|
struct pcan_usb_pro_msg *pum)
|
|
{
|
|
int actual_length;
|
|
int err;
|
|
|
|
/* usb device unregistered? */
|
|
if (!(dev->state & PCAN_USB_STATE_CONNECTED))
|
|
return 0;
|
|
|
|
err = usb_bulk_msg(dev->udev,
|
|
usb_sndbulkpipe(dev->udev, PCAN_USBPRO_EP_CMDOUT),
|
|
pum->u.rec_buffer, pum->rec_buffer_len,
|
|
&actual_length, PCAN_USBPRO_COMMAND_TIMEOUT);
|
|
if (err)
|
|
netdev_err(dev->netdev, "sending command failure: %d\n", err);
|
|
|
|
return err;
|
|
}
|
|
|
|
/*
|
|
* wait for PCAN-USB Pro command response
|
|
*/
|
|
static int pcan_usb_pro_wait_rsp(struct peak_usb_device *dev,
|
|
struct pcan_usb_pro_msg *pum)
|
|
{
|
|
u8 req_data_type, req_channel;
|
|
int actual_length;
|
|
int i, err = 0;
|
|
|
|
/* usb device unregistered? */
|
|
if (!(dev->state & PCAN_USB_STATE_CONNECTED))
|
|
return 0;
|
|
|
|
req_data_type = pum->u.rec_buffer[4];
|
|
req_channel = pum->u.rec_buffer[5];
|
|
|
|
*pum->u.rec_cnt = 0;
|
|
for (i = 0; !err && i < PCAN_USBPRO_RSP_SUBMIT_MAX; i++) {
|
|
struct pcan_usb_pro_msg rsp;
|
|
union pcan_usb_pro_rec *pr;
|
|
u32 r, rec_cnt;
|
|
u16 rec_len;
|
|
u8 *pc;
|
|
|
|
err = usb_bulk_msg(dev->udev,
|
|
usb_rcvbulkpipe(dev->udev, PCAN_USBPRO_EP_CMDIN),
|
|
pum->u.rec_buffer, pum->rec_buffer_len,
|
|
&actual_length, PCAN_USBPRO_COMMAND_TIMEOUT);
|
|
if (err) {
|
|
netdev_err(dev->netdev, "waiting rsp error %d\n", err);
|
|
break;
|
|
}
|
|
|
|
if (actual_length == 0)
|
|
continue;
|
|
|
|
err = -EBADMSG;
|
|
if (actual_length < PCAN_USBPRO_MSG_HEADER_LEN) {
|
|
netdev_err(dev->netdev,
|
|
"got abnormal too small rsp (len=%d)\n",
|
|
actual_length);
|
|
break;
|
|
}
|
|
|
|
pc = pcan_msg_init(&rsp, pum->u.rec_buffer,
|
|
actual_length);
|
|
|
|
rec_cnt = le32_to_cpu(*rsp.u.rec_cnt);
|
|
|
|
/* loop on records stored into message */
|
|
for (r = 0; r < rec_cnt; r++) {
|
|
pr = (union pcan_usb_pro_rec *)pc;
|
|
rec_len = pcan_usb_pro_sizeof_rec[pr->data_type];
|
|
if (!rec_len) {
|
|
netdev_err(dev->netdev,
|
|
"got unprocessed record in msg\n");
|
|
pcan_dump_mem("rcvd rsp msg", pum->u.rec_buffer,
|
|
actual_length);
|
|
break;
|
|
}
|
|
|
|
/* check if response corresponds to request */
|
|
if (pr->data_type != req_data_type)
|
|
netdev_err(dev->netdev,
|
|
"got unwanted rsp %xh: ignored\n",
|
|
pr->data_type);
|
|
|
|
/* check if channel in response corresponds too */
|
|
else if ((req_channel != 0xff) && \
|
|
(pr->bus_act.channel != req_channel))
|
|
netdev_err(dev->netdev,
|
|
"got rsp %xh but on chan%u: ignored\n",
|
|
req_data_type, pr->bus_act.channel);
|
|
|
|
/* got the response */
|
|
else
|
|
return 0;
|
|
|
|
/* otherwise, go on with next record in message */
|
|
pc += rec_len;
|
|
}
|
|
}
|
|
|
|
return (i >= PCAN_USBPRO_RSP_SUBMIT_MAX) ? -ERANGE : err;
|
|
}
|
|
|
|
int pcan_usb_pro_send_req(struct peak_usb_device *dev, int req_id,
|
|
int req_value, void *req_addr, int req_size)
|
|
{
|
|
int err;
|
|
u8 req_type;
|
|
unsigned int p;
|
|
|
|
/* usb device unregistered? */
|
|
if (!(dev->state & PCAN_USB_STATE_CONNECTED))
|
|
return 0;
|
|
|
|
req_type = USB_TYPE_VENDOR | USB_RECIP_OTHER;
|
|
|
|
switch (req_id) {
|
|
case PCAN_USBPRO_REQ_FCT:
|
|
p = usb_sndctrlpipe(dev->udev, 0);
|
|
break;
|
|
|
|
default:
|
|
p = usb_rcvctrlpipe(dev->udev, 0);
|
|
req_type |= USB_DIR_IN;
|
|
memset(req_addr, '\0', req_size);
|
|
break;
|
|
}
|
|
|
|
err = usb_control_msg(dev->udev, p, req_id, req_type, req_value, 0,
|
|
req_addr, req_size, 2 * USB_CTRL_GET_TIMEOUT);
|
|
if (err < 0) {
|
|
netdev_info(dev->netdev,
|
|
"unable to request usb[type=%d value=%d] err=%d\n",
|
|
req_id, req_value, err);
|
|
return err;
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int pcan_usb_pro_set_ts(struct peak_usb_device *dev, u16 onoff)
|
|
{
|
|
struct pcan_usb_pro_msg um;
|
|
|
|
pcan_msg_init_empty(&um, dev->cmd_buf, PCAN_USB_MAX_CMD_LEN);
|
|
pcan_msg_add_rec(&um, PCAN_USBPRO_SETTS, onoff);
|
|
|
|
return pcan_usb_pro_send_cmd(dev, &um);
|
|
}
|
|
|
|
static int pcan_usb_pro_set_bitrate(struct peak_usb_device *dev, u32 ccbt)
|
|
{
|
|
struct pcan_usb_pro_device *pdev =
|
|
container_of(dev, struct pcan_usb_pro_device, dev);
|
|
struct pcan_usb_pro_msg um;
|
|
|
|
pcan_msg_init_empty(&um, dev->cmd_buf, PCAN_USB_MAX_CMD_LEN);
|
|
pcan_msg_add_rec(&um, PCAN_USBPRO_SETBTR, dev->ctrl_idx, ccbt);
|
|
|
|
/* cache the CCBT value to reuse it before next buson */
|
|
pdev->cached_ccbt = ccbt;
|
|
|
|
return pcan_usb_pro_send_cmd(dev, &um);
|
|
}
|
|
|
|
static int pcan_usb_pro_set_bus(struct peak_usb_device *dev, u8 onoff)
|
|
{
|
|
struct pcan_usb_pro_msg um;
|
|
|
|
/* if bus=on, be sure the bitrate being set before! */
|
|
if (onoff) {
|
|
struct pcan_usb_pro_device *pdev =
|
|
container_of(dev, struct pcan_usb_pro_device, dev);
|
|
|
|
pcan_usb_pro_set_bitrate(dev, pdev->cached_ccbt);
|
|
}
|
|
|
|
pcan_msg_init_empty(&um, dev->cmd_buf, PCAN_USB_MAX_CMD_LEN);
|
|
pcan_msg_add_rec(&um, PCAN_USBPRO_SETBUSACT, dev->ctrl_idx, onoff);
|
|
|
|
return pcan_usb_pro_send_cmd(dev, &um);
|
|
}
|
|
|
|
static int pcan_usb_pro_set_silent(struct peak_usb_device *dev, u8 onoff)
|
|
{
|
|
struct pcan_usb_pro_msg um;
|
|
|
|
pcan_msg_init_empty(&um, dev->cmd_buf, PCAN_USB_MAX_CMD_LEN);
|
|
pcan_msg_add_rec(&um, PCAN_USBPRO_SETSILENT, dev->ctrl_idx, onoff);
|
|
|
|
return pcan_usb_pro_send_cmd(dev, &um);
|
|
}
|
|
|
|
static int pcan_usb_pro_set_filter(struct peak_usb_device *dev, u16 filter_mode)
|
|
{
|
|
struct pcan_usb_pro_msg um;
|
|
|
|
pcan_msg_init_empty(&um, dev->cmd_buf, PCAN_USB_MAX_CMD_LEN);
|
|
pcan_msg_add_rec(&um, PCAN_USBPRO_SETFILTR, dev->ctrl_idx, filter_mode);
|
|
|
|
return pcan_usb_pro_send_cmd(dev, &um);
|
|
}
|
|
|
|
static int pcan_usb_pro_set_led(struct peak_usb_device *dev, u8 mode,
|
|
u32 timeout)
|
|
{
|
|
struct pcan_usb_pro_msg um;
|
|
|
|
pcan_msg_init_empty(&um, dev->cmd_buf, PCAN_USB_MAX_CMD_LEN);
|
|
pcan_msg_add_rec(&um, PCAN_USBPRO_SETLED, dev->ctrl_idx, mode, timeout);
|
|
|
|
return pcan_usb_pro_send_cmd(dev, &um);
|
|
}
|
|
|
|
static int pcan_usb_pro_get_device_id(struct peak_usb_device *dev,
|
|
u32 *device_id)
|
|
{
|
|
struct pcan_usb_pro_devid *pdn;
|
|
struct pcan_usb_pro_msg um;
|
|
int err;
|
|
u8 *pc;
|
|
|
|
pc = pcan_msg_init_empty(&um, dev->cmd_buf, PCAN_USB_MAX_CMD_LEN);
|
|
pcan_msg_add_rec(&um, PCAN_USBPRO_GETDEVID, dev->ctrl_idx);
|
|
|
|
err = pcan_usb_pro_send_cmd(dev, &um);
|
|
if (err)
|
|
return err;
|
|
|
|
err = pcan_usb_pro_wait_rsp(dev, &um);
|
|
if (err)
|
|
return err;
|
|
|
|
pdn = (struct pcan_usb_pro_devid *)pc;
|
|
if (device_id)
|
|
*device_id = le32_to_cpu(pdn->serial_num);
|
|
|
|
return err;
|
|
}
|
|
|
|
static int pcan_usb_pro_set_bittiming(struct peak_usb_device *dev,
|
|
struct can_bittiming *bt)
|
|
{
|
|
u32 ccbt;
|
|
|
|
ccbt = (dev->can.ctrlmode & CAN_CTRLMODE_3_SAMPLES) ? 0x00800000 : 0;
|
|
ccbt |= (bt->sjw - 1) << 24;
|
|
ccbt |= (bt->phase_seg2 - 1) << 20;
|
|
ccbt |= (bt->prop_seg + bt->phase_seg1 - 1) << 16; /* = tseg1 */
|
|
ccbt |= bt->brp - 1;
|
|
|
|
netdev_info(dev->netdev, "setting ccbt=0x%08x\n", ccbt);
|
|
|
|
return pcan_usb_pro_set_bitrate(dev, ccbt);
|
|
}
|
|
|
|
void pcan_usb_pro_restart_complete(struct urb *urb)
|
|
{
|
|
/* can delete usb resources */
|
|
peak_usb_async_complete(urb);
|
|
|
|
/* notify candev and netdev */
|
|
peak_usb_restart_complete(urb->context);
|
|
}
|
|
|
|
/*
|
|
* handle restart but in asynchronously way
|
|
*/
|
|
static int pcan_usb_pro_restart_async(struct peak_usb_device *dev,
|
|
struct urb *urb, u8 *buf)
|
|
{
|
|
struct pcan_usb_pro_msg um;
|
|
|
|
pcan_msg_init_empty(&um, buf, PCAN_USB_MAX_CMD_LEN);
|
|
pcan_msg_add_rec(&um, PCAN_USBPRO_SETBUSACT, dev->ctrl_idx, 1);
|
|
|
|
usb_fill_bulk_urb(urb, dev->udev,
|
|
usb_sndbulkpipe(dev->udev, PCAN_USBPRO_EP_CMDOUT),
|
|
buf, PCAN_USB_MAX_CMD_LEN,
|
|
pcan_usb_pro_restart_complete, dev);
|
|
|
|
return usb_submit_urb(urb, GFP_ATOMIC);
|
|
}
|
|
|
|
static int pcan_usb_pro_drv_loaded(struct peak_usb_device *dev, int loaded)
|
|
{
|
|
u8 *buffer;
|
|
int err;
|
|
|
|
buffer = kzalloc(PCAN_USBPRO_FCT_DRVLD_REQ_LEN, GFP_KERNEL);
|
|
if (!buffer)
|
|
return -ENOMEM;
|
|
|
|
buffer[0] = 0;
|
|
buffer[1] = !!loaded;
|
|
|
|
err = pcan_usb_pro_send_req(dev, PCAN_USBPRO_REQ_FCT,
|
|
PCAN_USBPRO_FCT_DRVLD, buffer,
|
|
PCAN_USBPRO_FCT_DRVLD_REQ_LEN);
|
|
kfree(buffer);
|
|
|
|
return err;
|
|
}
|
|
|
|
static inline
|
|
struct pcan_usb_pro_interface *pcan_usb_pro_dev_if(struct peak_usb_device *dev)
|
|
{
|
|
struct pcan_usb_pro_device *pdev =
|
|
container_of(dev, struct pcan_usb_pro_device, dev);
|
|
return pdev->usb_if;
|
|
}
|
|
|
|
static int pcan_usb_pro_handle_canmsg(struct pcan_usb_pro_interface *usb_if,
|
|
struct pcan_usb_pro_rxmsg *rx)
|
|
{
|
|
const unsigned int ctrl_idx = (rx->len >> 4) & 0x0f;
|
|
struct peak_usb_device *dev = usb_if->dev[ctrl_idx];
|
|
struct net_device *netdev = dev->netdev;
|
|
struct can_frame *can_frame;
|
|
struct sk_buff *skb;
|
|
struct skb_shared_hwtstamps *hwts;
|
|
|
|
skb = alloc_can_skb(netdev, &can_frame);
|
|
if (!skb)
|
|
return -ENOMEM;
|
|
|
|
can_frame->can_id = le32_to_cpu(rx->id);
|
|
can_frame->can_dlc = rx->len & 0x0f;
|
|
|
|
if (rx->flags & PCAN_USBPRO_EXT)
|
|
can_frame->can_id |= CAN_EFF_FLAG;
|
|
|
|
if (rx->flags & PCAN_USBPRO_RTR)
|
|
can_frame->can_id |= CAN_RTR_FLAG;
|
|
else
|
|
memcpy(can_frame->data, rx->data, can_frame->can_dlc);
|
|
|
|
hwts = skb_hwtstamps(skb);
|
|
peak_usb_get_ts_time(&usb_if->time_ref, le32_to_cpu(rx->ts32),
|
|
&hwts->hwtstamp);
|
|
|
|
netdev->stats.rx_packets++;
|
|
netdev->stats.rx_bytes += can_frame->can_dlc;
|
|
netif_rx(skb);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int pcan_usb_pro_handle_error(struct pcan_usb_pro_interface *usb_if,
|
|
struct pcan_usb_pro_rxstatus *er)
|
|
{
|
|
const u16 raw_status = le16_to_cpu(er->status);
|
|
const unsigned int ctrl_idx = (er->channel >> 4) & 0x0f;
|
|
struct peak_usb_device *dev = usb_if->dev[ctrl_idx];
|
|
struct net_device *netdev = dev->netdev;
|
|
struct can_frame *can_frame;
|
|
enum can_state new_state = CAN_STATE_ERROR_ACTIVE;
|
|
u8 err_mask = 0;
|
|
struct sk_buff *skb;
|
|
struct skb_shared_hwtstamps *hwts;
|
|
|
|
/* nothing should be sent while in BUS_OFF state */
|
|
if (dev->can.state == CAN_STATE_BUS_OFF)
|
|
return 0;
|
|
|
|
if (!raw_status) {
|
|
/* no error bit (back to active state) */
|
|
dev->can.state = CAN_STATE_ERROR_ACTIVE;
|
|
return 0;
|
|
}
|
|
|
|
if (raw_status & (PCAN_USBPRO_STATUS_OVERRUN |
|
|
PCAN_USBPRO_STATUS_QOVERRUN)) {
|
|
/* trick to bypass next comparison and process other errors */
|
|
new_state = CAN_STATE_MAX;
|
|
}
|
|
|
|
if (raw_status & PCAN_USBPRO_STATUS_BUS) {
|
|
new_state = CAN_STATE_BUS_OFF;
|
|
} else if (raw_status & PCAN_USBPRO_STATUS_ERROR) {
|
|
u32 rx_err_cnt = (le32_to_cpu(er->err_frm) & 0x00ff0000) >> 16;
|
|
u32 tx_err_cnt = (le32_to_cpu(er->err_frm) & 0xff000000) >> 24;
|
|
|
|
if (rx_err_cnt > 127)
|
|
err_mask |= CAN_ERR_CRTL_RX_PASSIVE;
|
|
else if (rx_err_cnt > 96)
|
|
err_mask |= CAN_ERR_CRTL_RX_WARNING;
|
|
|
|
if (tx_err_cnt > 127)
|
|
err_mask |= CAN_ERR_CRTL_TX_PASSIVE;
|
|
else if (tx_err_cnt > 96)
|
|
err_mask |= CAN_ERR_CRTL_TX_WARNING;
|
|
|
|
if (err_mask & (CAN_ERR_CRTL_RX_WARNING |
|
|
CAN_ERR_CRTL_TX_WARNING))
|
|
new_state = CAN_STATE_ERROR_WARNING;
|
|
else if (err_mask & (CAN_ERR_CRTL_RX_PASSIVE |
|
|
CAN_ERR_CRTL_TX_PASSIVE))
|
|
new_state = CAN_STATE_ERROR_PASSIVE;
|
|
}
|
|
|
|
/* donot post any error if current state didn't change */
|
|
if (dev->can.state == new_state)
|
|
return 0;
|
|
|
|
/* allocate an skb to store the error frame */
|
|
skb = alloc_can_err_skb(netdev, &can_frame);
|
|
if (!skb)
|
|
return -ENOMEM;
|
|
|
|
switch (new_state) {
|
|
case CAN_STATE_BUS_OFF:
|
|
can_frame->can_id |= CAN_ERR_BUSOFF;
|
|
dev->can.can_stats.bus_off++;
|
|
can_bus_off(netdev);
|
|
break;
|
|
|
|
case CAN_STATE_ERROR_PASSIVE:
|
|
can_frame->can_id |= CAN_ERR_CRTL;
|
|
can_frame->data[1] |= err_mask;
|
|
dev->can.can_stats.error_passive++;
|
|
break;
|
|
|
|
case CAN_STATE_ERROR_WARNING:
|
|
can_frame->can_id |= CAN_ERR_CRTL;
|
|
can_frame->data[1] |= err_mask;
|
|
dev->can.can_stats.error_warning++;
|
|
break;
|
|
|
|
case CAN_STATE_ERROR_ACTIVE:
|
|
break;
|
|
|
|
default:
|
|
/* CAN_STATE_MAX (trick to handle other errors) */
|
|
if (raw_status & PCAN_USBPRO_STATUS_OVERRUN) {
|
|
can_frame->can_id |= CAN_ERR_PROT;
|
|
can_frame->data[2] |= CAN_ERR_PROT_OVERLOAD;
|
|
netdev->stats.rx_over_errors++;
|
|
netdev->stats.rx_errors++;
|
|
}
|
|
|
|
if (raw_status & PCAN_USBPRO_STATUS_QOVERRUN) {
|
|
can_frame->can_id |= CAN_ERR_CRTL;
|
|
can_frame->data[1] |= CAN_ERR_CRTL_RX_OVERFLOW;
|
|
netdev->stats.rx_over_errors++;
|
|
netdev->stats.rx_errors++;
|
|
}
|
|
|
|
new_state = CAN_STATE_ERROR_ACTIVE;
|
|
break;
|
|
}
|
|
|
|
dev->can.state = new_state;
|
|
|
|
hwts = skb_hwtstamps(skb);
|
|
peak_usb_get_ts_time(&usb_if->time_ref, le32_to_cpu(er->ts32), &hwts->hwtstamp);
|
|
netdev->stats.rx_packets++;
|
|
netdev->stats.rx_bytes += can_frame->can_dlc;
|
|
netif_rx(skb);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static void pcan_usb_pro_handle_ts(struct pcan_usb_pro_interface *usb_if,
|
|
struct pcan_usb_pro_rxts *ts)
|
|
{
|
|
/* should wait until clock is stabilized */
|
|
if (usb_if->cm_ignore_count > 0)
|
|
usb_if->cm_ignore_count--;
|
|
else
|
|
peak_usb_set_ts_now(&usb_if->time_ref,
|
|
le32_to_cpu(ts->ts64[1]));
|
|
}
|
|
|
|
/*
|
|
* callback for bulk IN urb
|
|
*/
|
|
static int pcan_usb_pro_decode_buf(struct peak_usb_device *dev, struct urb *urb)
|
|
{
|
|
struct pcan_usb_pro_interface *usb_if = pcan_usb_pro_dev_if(dev);
|
|
struct net_device *netdev = dev->netdev;
|
|
struct pcan_usb_pro_msg usb_msg;
|
|
u8 *rec_ptr, *msg_end;
|
|
u16 rec_cnt;
|
|
int err = 0;
|
|
|
|
rec_ptr = pcan_msg_init(&usb_msg, urb->transfer_buffer,
|
|
urb->actual_length);
|
|
if (!rec_ptr) {
|
|
netdev_err(netdev, "bad msg hdr len %d\n", urb->actual_length);
|
|
return -EINVAL;
|
|
}
|
|
|
|
/* loop reading all the records from the incoming message */
|
|
msg_end = urb->transfer_buffer + urb->actual_length;
|
|
rec_cnt = le16_to_cpu(*usb_msg.u.rec_cnt_rd);
|
|
for (; rec_cnt > 0; rec_cnt--) {
|
|
union pcan_usb_pro_rec *pr = (union pcan_usb_pro_rec *)rec_ptr;
|
|
u16 sizeof_rec = pcan_usb_pro_sizeof_rec[pr->data_type];
|
|
|
|
if (!sizeof_rec) {
|
|
netdev_err(netdev,
|
|
"got unsupported rec in usb msg:\n");
|
|
err = -ENOTSUPP;
|
|
break;
|
|
}
|
|
|
|
/* check if the record goes out of current packet */
|
|
if (rec_ptr + sizeof_rec > msg_end) {
|
|
netdev_err(netdev,
|
|
"got frag rec: should inc usb rx buf size\n");
|
|
err = -EBADMSG;
|
|
break;
|
|
}
|
|
|
|
switch (pr->data_type) {
|
|
case PCAN_USBPRO_RXMSG8:
|
|
case PCAN_USBPRO_RXMSG4:
|
|
case PCAN_USBPRO_RXMSG0:
|
|
case PCAN_USBPRO_RXRTR:
|
|
err = pcan_usb_pro_handle_canmsg(usb_if, &pr->rx_msg);
|
|
if (err < 0)
|
|
goto fail;
|
|
break;
|
|
|
|
case PCAN_USBPRO_RXSTATUS:
|
|
err = pcan_usb_pro_handle_error(usb_if, &pr->rx_status);
|
|
if (err < 0)
|
|
goto fail;
|
|
break;
|
|
|
|
case PCAN_USBPRO_RXTS:
|
|
pcan_usb_pro_handle_ts(usb_if, &pr->rx_ts);
|
|
break;
|
|
|
|
default:
|
|
netdev_err(netdev,
|
|
"unhandled rec type 0x%02x (%d): ignored\n",
|
|
pr->data_type, pr->data_type);
|
|
break;
|
|
}
|
|
|
|
rec_ptr += sizeof_rec;
|
|
}
|
|
|
|
fail:
|
|
if (err)
|
|
pcan_dump_mem("received msg",
|
|
urb->transfer_buffer, urb->actual_length);
|
|
|
|
return err;
|
|
}
|
|
|
|
static int pcan_usb_pro_encode_msg(struct peak_usb_device *dev,
|
|
struct sk_buff *skb, u8 *obuf, size_t *size)
|
|
{
|
|
struct can_frame *cf = (struct can_frame *)skb->data;
|
|
u8 data_type, len, flags;
|
|
struct pcan_usb_pro_msg usb_msg;
|
|
|
|
pcan_msg_init_empty(&usb_msg, obuf, *size);
|
|
|
|
if ((cf->can_id & CAN_RTR_FLAG) || (cf->can_dlc == 0))
|
|
data_type = PCAN_USBPRO_TXMSG0;
|
|
else if (cf->can_dlc <= 4)
|
|
data_type = PCAN_USBPRO_TXMSG4;
|
|
else
|
|
data_type = PCAN_USBPRO_TXMSG8;
|
|
|
|
len = (dev->ctrl_idx << 4) | (cf->can_dlc & 0x0f);
|
|
|
|
flags = 0;
|
|
if (cf->can_id & CAN_EFF_FLAG)
|
|
flags |= 0x02;
|
|
if (cf->can_id & CAN_RTR_FLAG)
|
|
flags |= 0x01;
|
|
|
|
pcan_msg_add_rec(&usb_msg, data_type, 0, flags, len, cf->can_id,
|
|
cf->data);
|
|
|
|
*size = usb_msg.rec_buffer_len;
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int pcan_usb_pro_start(struct peak_usb_device *dev)
|
|
{
|
|
struct pcan_usb_pro_device *pdev =
|
|
container_of(dev, struct pcan_usb_pro_device, dev);
|
|
int err;
|
|
|
|
err = pcan_usb_pro_set_silent(dev,
|
|
dev->can.ctrlmode & CAN_CTRLMODE_LISTENONLY);
|
|
if (err)
|
|
return err;
|
|
|
|
/* filter mode: 0-> All OFF; 1->bypass */
|
|
err = pcan_usb_pro_set_filter(dev, 1);
|
|
if (err)
|
|
return err;
|
|
|
|
/* opening first device: */
|
|
if (pdev->usb_if->dev_opened_count == 0) {
|
|
/* reset time_ref */
|
|
peak_usb_init_time_ref(&pdev->usb_if->time_ref, &pcan_usb_pro);
|
|
|
|
/* ask device to send ts messages */
|
|
err = pcan_usb_pro_set_ts(dev, 1);
|
|
}
|
|
|
|
pdev->usb_if->dev_opened_count++;
|
|
|
|
return err;
|
|
}
|
|
|
|
/*
|
|
* stop interface
|
|
* (last chance before set bus off)
|
|
*/
|
|
static int pcan_usb_pro_stop(struct peak_usb_device *dev)
|
|
{
|
|
struct pcan_usb_pro_device *pdev =
|
|
container_of(dev, struct pcan_usb_pro_device, dev);
|
|
|
|
/* turn off ts msgs for that interface if no other dev opened */
|
|
if (pdev->usb_if->dev_opened_count == 1)
|
|
pcan_usb_pro_set_ts(dev, 0);
|
|
|
|
pdev->usb_if->dev_opened_count--;
|
|
|
|
return 0;
|
|
}
|
|
|
|
/*
|
|
* called when probing to initialize a device object.
|
|
*/
|
|
static int pcan_usb_pro_init(struct peak_usb_device *dev)
|
|
{
|
|
struct pcan_usb_pro_device *pdev =
|
|
container_of(dev, struct pcan_usb_pro_device, dev);
|
|
struct pcan_usb_pro_interface *usb_if = NULL;
|
|
struct pcan_usb_pro_fwinfo *fi = NULL;
|
|
struct pcan_usb_pro_blinfo *bi = NULL;
|
|
int err;
|
|
|
|
/* do this for 1st channel only */
|
|
if (!dev->prev_siblings) {
|
|
/* allocate netdevices common structure attached to first one */
|
|
usb_if = kzalloc(sizeof(struct pcan_usb_pro_interface),
|
|
GFP_KERNEL);
|
|
fi = kmalloc(sizeof(struct pcan_usb_pro_fwinfo), GFP_KERNEL);
|
|
bi = kmalloc(sizeof(struct pcan_usb_pro_blinfo), GFP_KERNEL);
|
|
if (!usb_if || !fi || !bi) {
|
|
err = -ENOMEM;
|
|
goto err_out;
|
|
}
|
|
|
|
/* number of ts msgs to ignore before taking one into account */
|
|
usb_if->cm_ignore_count = 5;
|
|
|
|
/*
|
|
* explicit use of dev_xxx() instead of netdev_xxx() here:
|
|
* information displayed are related to the device itself, not
|
|
* to the canx netdevices.
|
|
*/
|
|
err = pcan_usb_pro_send_req(dev, PCAN_USBPRO_REQ_INFO,
|
|
PCAN_USBPRO_INFO_FW,
|
|
fi, sizeof(*fi));
|
|
if (err) {
|
|
dev_err(dev->netdev->dev.parent,
|
|
"unable to read %s firmware info (err %d)\n",
|
|
pcan_usb_pro.name, err);
|
|
goto err_out;
|
|
}
|
|
|
|
err = pcan_usb_pro_send_req(dev, PCAN_USBPRO_REQ_INFO,
|
|
PCAN_USBPRO_INFO_BL,
|
|
bi, sizeof(*bi));
|
|
if (err) {
|
|
dev_err(dev->netdev->dev.parent,
|
|
"unable to read %s bootloader info (err %d)\n",
|
|
pcan_usb_pro.name, err);
|
|
goto err_out;
|
|
}
|
|
|
|
/* tell the device the can driver is running */
|
|
err = pcan_usb_pro_drv_loaded(dev, 1);
|
|
if (err)
|
|
goto err_out;
|
|
|
|
dev_info(dev->netdev->dev.parent,
|
|
"PEAK-System %s hwrev %u serial %08X.%08X (%u channels)\n",
|
|
pcan_usb_pro.name,
|
|
bi->hw_rev, bi->serial_num_hi, bi->serial_num_lo,
|
|
pcan_usb_pro.ctrl_count);
|
|
} else {
|
|
usb_if = pcan_usb_pro_dev_if(dev->prev_siblings);
|
|
}
|
|
|
|
pdev->usb_if = usb_if;
|
|
usb_if->dev[dev->ctrl_idx] = dev;
|
|
|
|
/* set LED in default state (end of init phase) */
|
|
pcan_usb_pro_set_led(dev, 0, 1);
|
|
|
|
kfree(bi);
|
|
kfree(fi);
|
|
|
|
return 0;
|
|
|
|
err_out:
|
|
kfree(bi);
|
|
kfree(fi);
|
|
kfree(usb_if);
|
|
|
|
return err;
|
|
}
|
|
|
|
static void pcan_usb_pro_exit(struct peak_usb_device *dev)
|
|
{
|
|
struct pcan_usb_pro_device *pdev =
|
|
container_of(dev, struct pcan_usb_pro_device, dev);
|
|
|
|
/*
|
|
* when rmmod called before unplug and if down, should reset things
|
|
* before leaving
|
|
*/
|
|
if (dev->can.state != CAN_STATE_STOPPED) {
|
|
/* set bus off on the corresponding channel */
|
|
pcan_usb_pro_set_bus(dev, 0);
|
|
}
|
|
|
|
/* if channel #0 (only) */
|
|
if (dev->ctrl_idx == 0) {
|
|
/* turn off calibration message if any device were opened */
|
|
if (pdev->usb_if->dev_opened_count > 0)
|
|
pcan_usb_pro_set_ts(dev, 0);
|
|
|
|
/* tell the PCAN-USB Pro device the driver is being unloaded */
|
|
pcan_usb_pro_drv_loaded(dev, 0);
|
|
}
|
|
}
|
|
|
|
/*
|
|
* called when PCAN-USB Pro adapter is unplugged
|
|
*/
|
|
static void pcan_usb_pro_free(struct peak_usb_device *dev)
|
|
{
|
|
/* last device: can free pcan_usb_pro_interface object now */
|
|
if (!dev->prev_siblings && !dev->next_siblings)
|
|
kfree(pcan_usb_pro_dev_if(dev));
|
|
}
|
|
|
|
/*
|
|
* probe function for new PCAN-USB Pro usb interface
|
|
*/
|
|
int pcan_usb_pro_probe(struct usb_interface *intf)
|
|
{
|
|
struct usb_host_interface *if_desc;
|
|
int i;
|
|
|
|
if_desc = intf->altsetting;
|
|
|
|
/* check interface endpoint addresses */
|
|
for (i = 0; i < if_desc->desc.bNumEndpoints; i++) {
|
|
struct usb_endpoint_descriptor *ep = &if_desc->endpoint[i].desc;
|
|
|
|
/*
|
|
* below is the list of valid ep addreses. Any other ep address
|
|
* is considered as not-CAN interface address => no dev created
|
|
*/
|
|
switch (ep->bEndpointAddress) {
|
|
case PCAN_USBPRO_EP_CMDOUT:
|
|
case PCAN_USBPRO_EP_CMDIN:
|
|
case PCAN_USBPRO_EP_MSGOUT_0:
|
|
case PCAN_USBPRO_EP_MSGOUT_1:
|
|
case PCAN_USBPRO_EP_MSGIN:
|
|
case PCAN_USBPRO_EP_UNUSED:
|
|
break;
|
|
default:
|
|
return -ENODEV;
|
|
}
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
/*
|
|
* describe the PCAN-USB Pro adapter
|
|
*/
|
|
static const struct can_bittiming_const pcan_usb_pro_const = {
|
|
.name = "pcan_usb_pro",
|
|
.tseg1_min = 1,
|
|
.tseg1_max = 16,
|
|
.tseg2_min = 1,
|
|
.tseg2_max = 8,
|
|
.sjw_max = 4,
|
|
.brp_min = 1,
|
|
.brp_max = 1024,
|
|
.brp_inc = 1,
|
|
};
|
|
|
|
const struct peak_usb_adapter pcan_usb_pro = {
|
|
.name = "PCAN-USB Pro",
|
|
.device_id = PCAN_USBPRO_PRODUCT_ID,
|
|
.ctrl_count = PCAN_USBPRO_CHANNEL_COUNT,
|
|
.ctrlmode_supported = CAN_CTRLMODE_3_SAMPLES | CAN_CTRLMODE_LISTENONLY,
|
|
.clock = {
|
|
.freq = PCAN_USBPRO_CRYSTAL_HZ,
|
|
},
|
|
.bittiming_const = &pcan_usb_pro_const,
|
|
|
|
/* size of device private data */
|
|
.sizeof_dev_private = sizeof(struct pcan_usb_pro_device),
|
|
|
|
/* timestamps usage */
|
|
.ts_used_bits = 32,
|
|
.ts_period = 1000000, /* calibration period in ts. */
|
|
.us_per_ts_scale = 1, /* us = (ts * scale) >> shift */
|
|
.us_per_ts_shift = 0,
|
|
|
|
/* give here messages in/out endpoints */
|
|
.ep_msg_in = PCAN_USBPRO_EP_MSGIN,
|
|
.ep_msg_out = {PCAN_USBPRO_EP_MSGOUT_0, PCAN_USBPRO_EP_MSGOUT_1},
|
|
|
|
/* size of rx/tx usb buffers */
|
|
.rx_buffer_size = PCAN_USBPRO_RX_BUFFER_SIZE,
|
|
.tx_buffer_size = PCAN_USBPRO_TX_BUFFER_SIZE,
|
|
|
|
/* device callbacks */
|
|
.intf_probe = pcan_usb_pro_probe,
|
|
.dev_init = pcan_usb_pro_init,
|
|
.dev_exit = pcan_usb_pro_exit,
|
|
.dev_free = pcan_usb_pro_free,
|
|
.dev_set_bus = pcan_usb_pro_set_bus,
|
|
.dev_set_bittiming = pcan_usb_pro_set_bittiming,
|
|
.dev_get_device_id = pcan_usb_pro_get_device_id,
|
|
.dev_decode_buf = pcan_usb_pro_decode_buf,
|
|
.dev_encode_msg = pcan_usb_pro_encode_msg,
|
|
.dev_start = pcan_usb_pro_start,
|
|
.dev_stop = pcan_usb_pro_stop,
|
|
.dev_restart_async = pcan_usb_pro_restart_async,
|
|
};
|