2759 lines
77 KiB
C
2759 lines
77 KiB
C
/*
|
|
* Copyright(c) 2008 - 2009 Atheros Corporation. All rights reserved.
|
|
*
|
|
* Derived from Intel e1000 driver
|
|
* Copyright(c) 1999 - 2005 Intel Corporation. All rights reserved.
|
|
*
|
|
* This program is free software; you can redistribute it and/or modify it
|
|
* under the terms of the GNU General Public License as published by the Free
|
|
* Software Foundation; either version 2 of the License, or (at your option)
|
|
* any later version.
|
|
*
|
|
* This program is distributed in the hope that it will be useful, but WITHOUT
|
|
* ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
|
|
* FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
|
|
* more details.
|
|
*
|
|
* You should have received a copy of the GNU General Public License along with
|
|
* this program; if not, write to the Free Software Foundation, Inc., 59
|
|
* Temple Place - Suite 330, Boston, MA 02111-1307, USA.
|
|
*/
|
|
|
|
#include "atl1c.h"
|
|
|
|
#define ATL1C_DRV_VERSION "1.0.1.1-NAPI"
|
|
char atl1c_driver_name[] = "atl1c";
|
|
char atl1c_driver_version[] = ATL1C_DRV_VERSION;
|
|
|
|
/*
|
|
* atl1c_pci_tbl - PCI Device ID Table
|
|
*
|
|
* Wildcard entries (PCI_ANY_ID) should come last
|
|
* Last entry must be all 0s
|
|
*
|
|
* { Vendor ID, Device ID, SubVendor ID, SubDevice ID,
|
|
* Class, Class Mask, private data (not used) }
|
|
*/
|
|
static DEFINE_PCI_DEVICE_TABLE(atl1c_pci_tbl) = {
|
|
{PCI_DEVICE(PCI_VENDOR_ID_ATTANSIC, PCI_DEVICE_ID_ATTANSIC_L1C)},
|
|
{PCI_DEVICE(PCI_VENDOR_ID_ATTANSIC, PCI_DEVICE_ID_ATTANSIC_L2C)},
|
|
{PCI_DEVICE(PCI_VENDOR_ID_ATTANSIC, PCI_DEVICE_ID_ATHEROS_L2C_B)},
|
|
{PCI_DEVICE(PCI_VENDOR_ID_ATTANSIC, PCI_DEVICE_ID_ATHEROS_L2C_B2)},
|
|
{PCI_DEVICE(PCI_VENDOR_ID_ATTANSIC, PCI_DEVICE_ID_ATHEROS_L1D)},
|
|
{PCI_DEVICE(PCI_VENDOR_ID_ATTANSIC, PCI_DEVICE_ID_ATHEROS_L1D_2_0)},
|
|
/* required last entry */
|
|
{ 0 }
|
|
};
|
|
MODULE_DEVICE_TABLE(pci, atl1c_pci_tbl);
|
|
|
|
MODULE_AUTHOR("Jie Yang");
|
|
MODULE_AUTHOR("Qualcomm Atheros Inc., <nic-devel@qualcomm.com>");
|
|
MODULE_DESCRIPTION("Qualcom Atheros 100/1000M Ethernet Network Driver");
|
|
MODULE_LICENSE("GPL");
|
|
MODULE_VERSION(ATL1C_DRV_VERSION);
|
|
|
|
static int atl1c_stop_mac(struct atl1c_hw *hw);
|
|
static void atl1c_disable_l0s_l1(struct atl1c_hw *hw);
|
|
static void atl1c_set_aspm(struct atl1c_hw *hw, u16 link_speed);
|
|
static void atl1c_start_mac(struct atl1c_adapter *adapter);
|
|
static void atl1c_clean_rx_irq(struct atl1c_adapter *adapter,
|
|
int *work_done, int work_to_do);
|
|
static int atl1c_up(struct atl1c_adapter *adapter);
|
|
static void atl1c_down(struct atl1c_adapter *adapter);
|
|
static int atl1c_reset_mac(struct atl1c_hw *hw);
|
|
static void atl1c_reset_dma_ring(struct atl1c_adapter *adapter);
|
|
static int atl1c_configure(struct atl1c_adapter *adapter);
|
|
static int atl1c_alloc_rx_buffer(struct atl1c_adapter *adapter);
|
|
|
|
static const u16 atl1c_pay_load_size[] = {
|
|
128, 256, 512, 1024, 2048, 4096,
|
|
};
|
|
|
|
|
|
static const u32 atl1c_default_msg = NETIF_MSG_DRV | NETIF_MSG_PROBE |
|
|
NETIF_MSG_LINK | NETIF_MSG_TIMER | NETIF_MSG_IFDOWN | NETIF_MSG_IFUP;
|
|
static void atl1c_pcie_patch(struct atl1c_hw *hw)
|
|
{
|
|
u32 mst_data, data;
|
|
|
|
/* pclk sel could switch to 25M */
|
|
AT_READ_REG(hw, REG_MASTER_CTRL, &mst_data);
|
|
mst_data &= ~MASTER_CTRL_CLK_SEL_DIS;
|
|
AT_WRITE_REG(hw, REG_MASTER_CTRL, mst_data);
|
|
|
|
/* WoL/PCIE related settings */
|
|
if (hw->nic_type == athr_l1c || hw->nic_type == athr_l2c) {
|
|
AT_READ_REG(hw, REG_PCIE_PHYMISC, &data);
|
|
data |= PCIE_PHYMISC_FORCE_RCV_DET;
|
|
AT_WRITE_REG(hw, REG_PCIE_PHYMISC, data);
|
|
} else { /* new dev set bit5 of MASTER */
|
|
if (!(mst_data & MASTER_CTRL_WAKEN_25M))
|
|
AT_WRITE_REG(hw, REG_MASTER_CTRL,
|
|
mst_data | MASTER_CTRL_WAKEN_25M);
|
|
}
|
|
/* aspm/PCIE setting only for l2cb 1.0 */
|
|
if (hw->nic_type == athr_l2c_b && hw->revision_id == L2CB_V10) {
|
|
AT_READ_REG(hw, REG_PCIE_PHYMISC2, &data);
|
|
data = FIELD_SETX(data, PCIE_PHYMISC2_CDR_BW,
|
|
L2CB1_PCIE_PHYMISC2_CDR_BW);
|
|
data = FIELD_SETX(data, PCIE_PHYMISC2_L0S_TH,
|
|
L2CB1_PCIE_PHYMISC2_L0S_TH);
|
|
AT_WRITE_REG(hw, REG_PCIE_PHYMISC2, data);
|
|
/* extend L1 sync timer */
|
|
AT_READ_REG(hw, REG_LINK_CTRL, &data);
|
|
data |= LINK_CTRL_EXT_SYNC;
|
|
AT_WRITE_REG(hw, REG_LINK_CTRL, data);
|
|
}
|
|
/* l2cb 1.x & l1d 1.x */
|
|
if (hw->nic_type == athr_l2c_b || hw->nic_type == athr_l1d) {
|
|
AT_READ_REG(hw, REG_PM_CTRL, &data);
|
|
data |= PM_CTRL_L0S_BUFSRX_EN;
|
|
AT_WRITE_REG(hw, REG_PM_CTRL, data);
|
|
/* clear vendor msg */
|
|
AT_READ_REG(hw, REG_DMA_DBG, &data);
|
|
AT_WRITE_REG(hw, REG_DMA_DBG, data & ~DMA_DBG_VENDOR_MSG);
|
|
}
|
|
}
|
|
|
|
/* FIXME: no need any more ? */
|
|
/*
|
|
* atl1c_init_pcie - init PCIE module
|
|
*/
|
|
static void atl1c_reset_pcie(struct atl1c_hw *hw, u32 flag)
|
|
{
|
|
u32 data;
|
|
u32 pci_cmd;
|
|
struct pci_dev *pdev = hw->adapter->pdev;
|
|
int pos;
|
|
|
|
AT_READ_REG(hw, PCI_COMMAND, &pci_cmd);
|
|
pci_cmd &= ~PCI_COMMAND_INTX_DISABLE;
|
|
pci_cmd |= (PCI_COMMAND_MEMORY | PCI_COMMAND_MASTER |
|
|
PCI_COMMAND_IO);
|
|
AT_WRITE_REG(hw, PCI_COMMAND, pci_cmd);
|
|
|
|
/*
|
|
* Clear any PowerSaveing Settings
|
|
*/
|
|
pci_enable_wake(pdev, PCI_D3hot, 0);
|
|
pci_enable_wake(pdev, PCI_D3cold, 0);
|
|
/* wol sts read-clear */
|
|
AT_READ_REG(hw, REG_WOL_CTRL, &data);
|
|
AT_WRITE_REG(hw, REG_WOL_CTRL, 0);
|
|
|
|
/*
|
|
* Mask some pcie error bits
|
|
*/
|
|
pos = pci_find_ext_capability(pdev, PCI_EXT_CAP_ID_ERR);
|
|
pci_read_config_dword(pdev, pos + PCI_ERR_UNCOR_SEVER, &data);
|
|
data &= ~(PCI_ERR_UNC_DLP | PCI_ERR_UNC_FCP);
|
|
pci_write_config_dword(pdev, pos + PCI_ERR_UNCOR_SEVER, data);
|
|
/* clear error status */
|
|
pcie_capability_write_word(pdev, PCI_EXP_DEVSTA,
|
|
PCI_EXP_DEVSTA_NFED |
|
|
PCI_EXP_DEVSTA_FED |
|
|
PCI_EXP_DEVSTA_CED |
|
|
PCI_EXP_DEVSTA_URD);
|
|
|
|
AT_READ_REG(hw, REG_LTSSM_ID_CTRL, &data);
|
|
data &= ~LTSSM_ID_EN_WRO;
|
|
AT_WRITE_REG(hw, REG_LTSSM_ID_CTRL, data);
|
|
|
|
atl1c_pcie_patch(hw);
|
|
if (flag & ATL1C_PCIE_L0S_L1_DISABLE)
|
|
atl1c_disable_l0s_l1(hw);
|
|
|
|
msleep(5);
|
|
}
|
|
|
|
/**
|
|
* atl1c_irq_enable - Enable default interrupt generation settings
|
|
* @adapter: board private structure
|
|
*/
|
|
static inline void atl1c_irq_enable(struct atl1c_adapter *adapter)
|
|
{
|
|
if (likely(atomic_dec_and_test(&adapter->irq_sem))) {
|
|
AT_WRITE_REG(&adapter->hw, REG_ISR, 0x7FFFFFFF);
|
|
AT_WRITE_REG(&adapter->hw, REG_IMR, adapter->hw.intr_mask);
|
|
AT_WRITE_FLUSH(&adapter->hw);
|
|
}
|
|
}
|
|
|
|
/**
|
|
* atl1c_irq_disable - Mask off interrupt generation on the NIC
|
|
* @adapter: board private structure
|
|
*/
|
|
static inline void atl1c_irq_disable(struct atl1c_adapter *adapter)
|
|
{
|
|
atomic_inc(&adapter->irq_sem);
|
|
AT_WRITE_REG(&adapter->hw, REG_IMR, 0);
|
|
AT_WRITE_REG(&adapter->hw, REG_ISR, ISR_DIS_INT);
|
|
AT_WRITE_FLUSH(&adapter->hw);
|
|
synchronize_irq(adapter->pdev->irq);
|
|
}
|
|
|
|
/**
|
|
* atl1c_irq_reset - reset interrupt confiure on the NIC
|
|
* @adapter: board private structure
|
|
*/
|
|
static inline void atl1c_irq_reset(struct atl1c_adapter *adapter)
|
|
{
|
|
atomic_set(&adapter->irq_sem, 1);
|
|
atl1c_irq_enable(adapter);
|
|
}
|
|
|
|
/*
|
|
* atl1c_wait_until_idle - wait up to AT_HW_MAX_IDLE_DELAY reads
|
|
* of the idle status register until the device is actually idle
|
|
*/
|
|
static u32 atl1c_wait_until_idle(struct atl1c_hw *hw, u32 modu_ctrl)
|
|
{
|
|
int timeout;
|
|
u32 data;
|
|
|
|
for (timeout = 0; timeout < AT_HW_MAX_IDLE_DELAY; timeout++) {
|
|
AT_READ_REG(hw, REG_IDLE_STATUS, &data);
|
|
if ((data & modu_ctrl) == 0)
|
|
return 0;
|
|
msleep(1);
|
|
}
|
|
return data;
|
|
}
|
|
|
|
/**
|
|
* atl1c_phy_config - Timer Call-back
|
|
* @data: pointer to netdev cast into an unsigned long
|
|
*/
|
|
static void atl1c_phy_config(unsigned long data)
|
|
{
|
|
struct atl1c_adapter *adapter = (struct atl1c_adapter *) data;
|
|
struct atl1c_hw *hw = &adapter->hw;
|
|
unsigned long flags;
|
|
|
|
spin_lock_irqsave(&adapter->mdio_lock, flags);
|
|
atl1c_restart_autoneg(hw);
|
|
spin_unlock_irqrestore(&adapter->mdio_lock, flags);
|
|
}
|
|
|
|
void atl1c_reinit_locked(struct atl1c_adapter *adapter)
|
|
{
|
|
WARN_ON(in_interrupt());
|
|
atl1c_down(adapter);
|
|
atl1c_up(adapter);
|
|
clear_bit(__AT_RESETTING, &adapter->flags);
|
|
}
|
|
|
|
static void atl1c_check_link_status(struct atl1c_adapter *adapter)
|
|
{
|
|
struct atl1c_hw *hw = &adapter->hw;
|
|
struct net_device *netdev = adapter->netdev;
|
|
struct pci_dev *pdev = adapter->pdev;
|
|
int err;
|
|
unsigned long flags;
|
|
u16 speed, duplex, phy_data;
|
|
|
|
spin_lock_irqsave(&adapter->mdio_lock, flags);
|
|
/* MII_BMSR must read twise */
|
|
atl1c_read_phy_reg(hw, MII_BMSR, &phy_data);
|
|
atl1c_read_phy_reg(hw, MII_BMSR, &phy_data);
|
|
spin_unlock_irqrestore(&adapter->mdio_lock, flags);
|
|
|
|
if ((phy_data & BMSR_LSTATUS) == 0) {
|
|
/* link down */
|
|
netif_carrier_off(netdev);
|
|
hw->hibernate = true;
|
|
if (atl1c_reset_mac(hw) != 0)
|
|
if (netif_msg_hw(adapter))
|
|
dev_warn(&pdev->dev, "reset mac failed\n");
|
|
atl1c_set_aspm(hw, SPEED_0);
|
|
atl1c_post_phy_linkchg(hw, SPEED_0);
|
|
atl1c_reset_dma_ring(adapter);
|
|
atl1c_configure(adapter);
|
|
} else {
|
|
/* Link Up */
|
|
hw->hibernate = false;
|
|
spin_lock_irqsave(&adapter->mdio_lock, flags);
|
|
err = atl1c_get_speed_and_duplex(hw, &speed, &duplex);
|
|
spin_unlock_irqrestore(&adapter->mdio_lock, flags);
|
|
if (unlikely(err))
|
|
return;
|
|
/* link result is our setting */
|
|
if (adapter->link_speed != speed ||
|
|
adapter->link_duplex != duplex) {
|
|
adapter->link_speed = speed;
|
|
adapter->link_duplex = duplex;
|
|
atl1c_set_aspm(hw, speed);
|
|
atl1c_post_phy_linkchg(hw, speed);
|
|
atl1c_start_mac(adapter);
|
|
if (netif_msg_link(adapter))
|
|
dev_info(&pdev->dev,
|
|
"%s: %s NIC Link is Up<%d Mbps %s>\n",
|
|
atl1c_driver_name, netdev->name,
|
|
adapter->link_speed,
|
|
adapter->link_duplex == FULL_DUPLEX ?
|
|
"Full Duplex" : "Half Duplex");
|
|
}
|
|
if (!netif_carrier_ok(netdev))
|
|
netif_carrier_on(netdev);
|
|
}
|
|
}
|
|
|
|
static void atl1c_link_chg_event(struct atl1c_adapter *adapter)
|
|
{
|
|
struct net_device *netdev = adapter->netdev;
|
|
struct pci_dev *pdev = adapter->pdev;
|
|
u16 phy_data;
|
|
u16 link_up;
|
|
|
|
spin_lock(&adapter->mdio_lock);
|
|
atl1c_read_phy_reg(&adapter->hw, MII_BMSR, &phy_data);
|
|
atl1c_read_phy_reg(&adapter->hw, MII_BMSR, &phy_data);
|
|
spin_unlock(&adapter->mdio_lock);
|
|
link_up = phy_data & BMSR_LSTATUS;
|
|
/* notify upper layer link down ASAP */
|
|
if (!link_up) {
|
|
if (netif_carrier_ok(netdev)) {
|
|
/* old link state: Up */
|
|
netif_carrier_off(netdev);
|
|
if (netif_msg_link(adapter))
|
|
dev_info(&pdev->dev,
|
|
"%s: %s NIC Link is Down\n",
|
|
atl1c_driver_name, netdev->name);
|
|
adapter->link_speed = SPEED_0;
|
|
}
|
|
}
|
|
|
|
set_bit(ATL1C_WORK_EVENT_LINK_CHANGE, &adapter->work_event);
|
|
schedule_work(&adapter->common_task);
|
|
}
|
|
|
|
static void atl1c_common_task(struct work_struct *work)
|
|
{
|
|
struct atl1c_adapter *adapter;
|
|
struct net_device *netdev;
|
|
|
|
adapter = container_of(work, struct atl1c_adapter, common_task);
|
|
netdev = adapter->netdev;
|
|
|
|
if (test_bit(__AT_DOWN, &adapter->flags))
|
|
return;
|
|
|
|
if (test_and_clear_bit(ATL1C_WORK_EVENT_RESET, &adapter->work_event)) {
|
|
netif_device_detach(netdev);
|
|
atl1c_down(adapter);
|
|
atl1c_up(adapter);
|
|
netif_device_attach(netdev);
|
|
}
|
|
|
|
if (test_and_clear_bit(ATL1C_WORK_EVENT_LINK_CHANGE,
|
|
&adapter->work_event)) {
|
|
atl1c_irq_disable(adapter);
|
|
atl1c_check_link_status(adapter);
|
|
atl1c_irq_enable(adapter);
|
|
}
|
|
}
|
|
|
|
|
|
static void atl1c_del_timer(struct atl1c_adapter *adapter)
|
|
{
|
|
del_timer_sync(&adapter->phy_config_timer);
|
|
}
|
|
|
|
|
|
/**
|
|
* atl1c_tx_timeout - Respond to a Tx Hang
|
|
* @netdev: network interface device structure
|
|
*/
|
|
static void atl1c_tx_timeout(struct net_device *netdev)
|
|
{
|
|
struct atl1c_adapter *adapter = netdev_priv(netdev);
|
|
|
|
/* Do the reset outside of interrupt context */
|
|
set_bit(ATL1C_WORK_EVENT_RESET, &adapter->work_event);
|
|
schedule_work(&adapter->common_task);
|
|
}
|
|
|
|
/**
|
|
* atl1c_set_multi - Multicast and Promiscuous mode set
|
|
* @netdev: network interface device structure
|
|
*
|
|
* The set_multi entry point is called whenever the multicast address
|
|
* list or the network interface flags are updated. This routine is
|
|
* responsible for configuring the hardware for proper multicast,
|
|
* promiscuous mode, and all-multi behavior.
|
|
*/
|
|
static void atl1c_set_multi(struct net_device *netdev)
|
|
{
|
|
struct atl1c_adapter *adapter = netdev_priv(netdev);
|
|
struct atl1c_hw *hw = &adapter->hw;
|
|
struct netdev_hw_addr *ha;
|
|
u32 mac_ctrl_data;
|
|
u32 hash_value;
|
|
|
|
/* Check for Promiscuous and All Multicast modes */
|
|
AT_READ_REG(hw, REG_MAC_CTRL, &mac_ctrl_data);
|
|
|
|
if (netdev->flags & IFF_PROMISC) {
|
|
mac_ctrl_data |= MAC_CTRL_PROMIS_EN;
|
|
} else if (netdev->flags & IFF_ALLMULTI) {
|
|
mac_ctrl_data |= MAC_CTRL_MC_ALL_EN;
|
|
mac_ctrl_data &= ~MAC_CTRL_PROMIS_EN;
|
|
} else {
|
|
mac_ctrl_data &= ~(MAC_CTRL_PROMIS_EN | MAC_CTRL_MC_ALL_EN);
|
|
}
|
|
|
|
AT_WRITE_REG(hw, REG_MAC_CTRL, mac_ctrl_data);
|
|
|
|
/* clear the old settings from the multicast hash table */
|
|
AT_WRITE_REG(hw, REG_RX_HASH_TABLE, 0);
|
|
AT_WRITE_REG_ARRAY(hw, REG_RX_HASH_TABLE, 1, 0);
|
|
|
|
/* comoute mc addresses' hash value ,and put it into hash table */
|
|
netdev_for_each_mc_addr(ha, netdev) {
|
|
hash_value = atl1c_hash_mc_addr(hw, ha->addr);
|
|
atl1c_hash_set(hw, hash_value);
|
|
}
|
|
}
|
|
|
|
static void __atl1c_vlan_mode(netdev_features_t features, u32 *mac_ctrl_data)
|
|
{
|
|
if (features & NETIF_F_HW_VLAN_CTAG_RX) {
|
|
/* enable VLAN tag insert/strip */
|
|
*mac_ctrl_data |= MAC_CTRL_RMV_VLAN;
|
|
} else {
|
|
/* disable VLAN tag insert/strip */
|
|
*mac_ctrl_data &= ~MAC_CTRL_RMV_VLAN;
|
|
}
|
|
}
|
|
|
|
static void atl1c_vlan_mode(struct net_device *netdev,
|
|
netdev_features_t features)
|
|
{
|
|
struct atl1c_adapter *adapter = netdev_priv(netdev);
|
|
struct pci_dev *pdev = adapter->pdev;
|
|
u32 mac_ctrl_data = 0;
|
|
|
|
if (netif_msg_pktdata(adapter))
|
|
dev_dbg(&pdev->dev, "atl1c_vlan_mode\n");
|
|
|
|
atl1c_irq_disable(adapter);
|
|
AT_READ_REG(&adapter->hw, REG_MAC_CTRL, &mac_ctrl_data);
|
|
__atl1c_vlan_mode(features, &mac_ctrl_data);
|
|
AT_WRITE_REG(&adapter->hw, REG_MAC_CTRL, mac_ctrl_data);
|
|
atl1c_irq_enable(adapter);
|
|
}
|
|
|
|
static void atl1c_restore_vlan(struct atl1c_adapter *adapter)
|
|
{
|
|
struct pci_dev *pdev = adapter->pdev;
|
|
|
|
if (netif_msg_pktdata(adapter))
|
|
dev_dbg(&pdev->dev, "atl1c_restore_vlan\n");
|
|
atl1c_vlan_mode(adapter->netdev, adapter->netdev->features);
|
|
}
|
|
|
|
/**
|
|
* atl1c_set_mac - Change the Ethernet Address of the NIC
|
|
* @netdev: network interface device structure
|
|
* @p: pointer to an address structure
|
|
*
|
|
* Returns 0 on success, negative on failure
|
|
*/
|
|
static int atl1c_set_mac_addr(struct net_device *netdev, void *p)
|
|
{
|
|
struct atl1c_adapter *adapter = netdev_priv(netdev);
|
|
struct sockaddr *addr = p;
|
|
|
|
if (!is_valid_ether_addr(addr->sa_data))
|
|
return -EADDRNOTAVAIL;
|
|
|
|
if (netif_running(netdev))
|
|
return -EBUSY;
|
|
|
|
memcpy(netdev->dev_addr, addr->sa_data, netdev->addr_len);
|
|
memcpy(adapter->hw.mac_addr, addr->sa_data, netdev->addr_len);
|
|
|
|
atl1c_hw_set_mac_addr(&adapter->hw, adapter->hw.mac_addr);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static void atl1c_set_rxbufsize(struct atl1c_adapter *adapter,
|
|
struct net_device *dev)
|
|
{
|
|
int mtu = dev->mtu;
|
|
|
|
adapter->rx_buffer_len = mtu > AT_RX_BUF_SIZE ?
|
|
roundup(mtu + ETH_HLEN + ETH_FCS_LEN + VLAN_HLEN, 8) : AT_RX_BUF_SIZE;
|
|
}
|
|
|
|
static netdev_features_t atl1c_fix_features(struct net_device *netdev,
|
|
netdev_features_t features)
|
|
{
|
|
/*
|
|
* Since there is no support for separate rx/tx vlan accel
|
|
* enable/disable make sure tx flag is always in same state as rx.
|
|
*/
|
|
if (features & NETIF_F_HW_VLAN_CTAG_RX)
|
|
features |= NETIF_F_HW_VLAN_CTAG_TX;
|
|
else
|
|
features &= ~NETIF_F_HW_VLAN_CTAG_TX;
|
|
|
|
if (netdev->mtu > MAX_TSO_FRAME_SIZE)
|
|
features &= ~(NETIF_F_TSO | NETIF_F_TSO6);
|
|
|
|
return features;
|
|
}
|
|
|
|
static int atl1c_set_features(struct net_device *netdev,
|
|
netdev_features_t features)
|
|
{
|
|
netdev_features_t changed = netdev->features ^ features;
|
|
|
|
if (changed & NETIF_F_HW_VLAN_CTAG_RX)
|
|
atl1c_vlan_mode(netdev, features);
|
|
|
|
return 0;
|
|
}
|
|
|
|
/**
|
|
* atl1c_change_mtu - Change the Maximum Transfer Unit
|
|
* @netdev: network interface device structure
|
|
* @new_mtu: new value for maximum frame size
|
|
*
|
|
* Returns 0 on success, negative on failure
|
|
*/
|
|
static int atl1c_change_mtu(struct net_device *netdev, int new_mtu)
|
|
{
|
|
struct atl1c_adapter *adapter = netdev_priv(netdev);
|
|
struct atl1c_hw *hw = &adapter->hw;
|
|
int old_mtu = netdev->mtu;
|
|
int max_frame = new_mtu + ETH_HLEN + ETH_FCS_LEN + VLAN_HLEN;
|
|
|
|
/* Fast Ethernet controller doesn't support jumbo packet */
|
|
if (((hw->nic_type == athr_l2c ||
|
|
hw->nic_type == athr_l2c_b ||
|
|
hw->nic_type == athr_l2c_b2) && new_mtu > ETH_DATA_LEN) ||
|
|
max_frame < ETH_ZLEN + ETH_FCS_LEN ||
|
|
max_frame > MAX_JUMBO_FRAME_SIZE) {
|
|
if (netif_msg_link(adapter))
|
|
dev_warn(&adapter->pdev->dev, "invalid MTU setting\n");
|
|
return -EINVAL;
|
|
}
|
|
/* set MTU */
|
|
if (old_mtu != new_mtu && netif_running(netdev)) {
|
|
while (test_and_set_bit(__AT_RESETTING, &adapter->flags))
|
|
msleep(1);
|
|
netdev->mtu = new_mtu;
|
|
adapter->hw.max_frame_size = new_mtu;
|
|
atl1c_set_rxbufsize(adapter, netdev);
|
|
atl1c_down(adapter);
|
|
netdev_update_features(netdev);
|
|
atl1c_up(adapter);
|
|
clear_bit(__AT_RESETTING, &adapter->flags);
|
|
}
|
|
return 0;
|
|
}
|
|
|
|
/*
|
|
* caller should hold mdio_lock
|
|
*/
|
|
static int atl1c_mdio_read(struct net_device *netdev, int phy_id, int reg_num)
|
|
{
|
|
struct atl1c_adapter *adapter = netdev_priv(netdev);
|
|
u16 result;
|
|
|
|
atl1c_read_phy_reg(&adapter->hw, reg_num, &result);
|
|
return result;
|
|
}
|
|
|
|
static void atl1c_mdio_write(struct net_device *netdev, int phy_id,
|
|
int reg_num, int val)
|
|
{
|
|
struct atl1c_adapter *adapter = netdev_priv(netdev);
|
|
|
|
atl1c_write_phy_reg(&adapter->hw, reg_num, val);
|
|
}
|
|
|
|
static int atl1c_mii_ioctl(struct net_device *netdev,
|
|
struct ifreq *ifr, int cmd)
|
|
{
|
|
struct atl1c_adapter *adapter = netdev_priv(netdev);
|
|
struct pci_dev *pdev = adapter->pdev;
|
|
struct mii_ioctl_data *data = if_mii(ifr);
|
|
unsigned long flags;
|
|
int retval = 0;
|
|
|
|
if (!netif_running(netdev))
|
|
return -EINVAL;
|
|
|
|
spin_lock_irqsave(&adapter->mdio_lock, flags);
|
|
switch (cmd) {
|
|
case SIOCGMIIPHY:
|
|
data->phy_id = 0;
|
|
break;
|
|
|
|
case SIOCGMIIREG:
|
|
if (atl1c_read_phy_reg(&adapter->hw, data->reg_num & 0x1F,
|
|
&data->val_out)) {
|
|
retval = -EIO;
|
|
goto out;
|
|
}
|
|
break;
|
|
|
|
case SIOCSMIIREG:
|
|
if (data->reg_num & ~(0x1F)) {
|
|
retval = -EFAULT;
|
|
goto out;
|
|
}
|
|
|
|
dev_dbg(&pdev->dev, "<atl1c_mii_ioctl> write %x %x",
|
|
data->reg_num, data->val_in);
|
|
if (atl1c_write_phy_reg(&adapter->hw,
|
|
data->reg_num, data->val_in)) {
|
|
retval = -EIO;
|
|
goto out;
|
|
}
|
|
break;
|
|
|
|
default:
|
|
retval = -EOPNOTSUPP;
|
|
break;
|
|
}
|
|
out:
|
|
spin_unlock_irqrestore(&adapter->mdio_lock, flags);
|
|
return retval;
|
|
}
|
|
|
|
static int atl1c_ioctl(struct net_device *netdev, struct ifreq *ifr, int cmd)
|
|
{
|
|
switch (cmd) {
|
|
case SIOCGMIIPHY:
|
|
case SIOCGMIIREG:
|
|
case SIOCSMIIREG:
|
|
return atl1c_mii_ioctl(netdev, ifr, cmd);
|
|
default:
|
|
return -EOPNOTSUPP;
|
|
}
|
|
}
|
|
|
|
/**
|
|
* atl1c_alloc_queues - Allocate memory for all rings
|
|
* @adapter: board private structure to initialize
|
|
*
|
|
*/
|
|
static int atl1c_alloc_queues(struct atl1c_adapter *adapter)
|
|
{
|
|
return 0;
|
|
}
|
|
|
|
static void atl1c_set_mac_type(struct atl1c_hw *hw)
|
|
{
|
|
switch (hw->device_id) {
|
|
case PCI_DEVICE_ID_ATTANSIC_L2C:
|
|
hw->nic_type = athr_l2c;
|
|
break;
|
|
case PCI_DEVICE_ID_ATTANSIC_L1C:
|
|
hw->nic_type = athr_l1c;
|
|
break;
|
|
case PCI_DEVICE_ID_ATHEROS_L2C_B:
|
|
hw->nic_type = athr_l2c_b;
|
|
break;
|
|
case PCI_DEVICE_ID_ATHEROS_L2C_B2:
|
|
hw->nic_type = athr_l2c_b2;
|
|
break;
|
|
case PCI_DEVICE_ID_ATHEROS_L1D:
|
|
hw->nic_type = athr_l1d;
|
|
break;
|
|
case PCI_DEVICE_ID_ATHEROS_L1D_2_0:
|
|
hw->nic_type = athr_l1d_2;
|
|
break;
|
|
default:
|
|
break;
|
|
}
|
|
}
|
|
|
|
static int atl1c_setup_mac_funcs(struct atl1c_hw *hw)
|
|
{
|
|
u32 link_ctrl_data;
|
|
|
|
atl1c_set_mac_type(hw);
|
|
AT_READ_REG(hw, REG_LINK_CTRL, &link_ctrl_data);
|
|
|
|
hw->ctrl_flags = ATL1C_INTR_MODRT_ENABLE |
|
|
ATL1C_TXQ_MODE_ENHANCE;
|
|
hw->ctrl_flags |= ATL1C_ASPM_L0S_SUPPORT |
|
|
ATL1C_ASPM_L1_SUPPORT;
|
|
hw->ctrl_flags |= ATL1C_ASPM_CTRL_MON;
|
|
|
|
if (hw->nic_type == athr_l1c ||
|
|
hw->nic_type == athr_l1d ||
|
|
hw->nic_type == athr_l1d_2)
|
|
hw->link_cap_flags |= ATL1C_LINK_CAP_1000M;
|
|
return 0;
|
|
}
|
|
|
|
struct atl1c_platform_patch {
|
|
u16 pci_did;
|
|
u8 pci_revid;
|
|
u16 subsystem_vid;
|
|
u16 subsystem_did;
|
|
u32 patch_flag;
|
|
#define ATL1C_LINK_PATCH 0x1
|
|
};
|
|
static const struct atl1c_platform_patch plats[] = {
|
|
{0x2060, 0xC1, 0x1019, 0x8152, 0x1},
|
|
{0x2060, 0xC1, 0x1019, 0x2060, 0x1},
|
|
{0x2060, 0xC1, 0x1019, 0xE000, 0x1},
|
|
{0x2062, 0xC0, 0x1019, 0x8152, 0x1},
|
|
{0x2062, 0xC0, 0x1019, 0x2062, 0x1},
|
|
{0x2062, 0xC0, 0x1458, 0xE000, 0x1},
|
|
{0x2062, 0xC1, 0x1019, 0x8152, 0x1},
|
|
{0x2062, 0xC1, 0x1019, 0x2062, 0x1},
|
|
{0x2062, 0xC1, 0x1458, 0xE000, 0x1},
|
|
{0x2062, 0xC1, 0x1565, 0x2802, 0x1},
|
|
{0x2062, 0xC1, 0x1565, 0x2801, 0x1},
|
|
{0x1073, 0xC0, 0x1019, 0x8151, 0x1},
|
|
{0x1073, 0xC0, 0x1019, 0x1073, 0x1},
|
|
{0x1073, 0xC0, 0x1458, 0xE000, 0x1},
|
|
{0x1083, 0xC0, 0x1458, 0xE000, 0x1},
|
|
{0x1083, 0xC0, 0x1019, 0x8151, 0x1},
|
|
{0x1083, 0xC0, 0x1019, 0x1083, 0x1},
|
|
{0x1083, 0xC0, 0x1462, 0x7680, 0x1},
|
|
{0x1083, 0xC0, 0x1565, 0x2803, 0x1},
|
|
{0},
|
|
};
|
|
|
|
static void atl1c_patch_assign(struct atl1c_hw *hw)
|
|
{
|
|
struct pci_dev *pdev = hw->adapter->pdev;
|
|
u32 misc_ctrl;
|
|
int i = 0;
|
|
|
|
hw->msi_lnkpatch = false;
|
|
|
|
while (plats[i].pci_did != 0) {
|
|
if (plats[i].pci_did == hw->device_id &&
|
|
plats[i].pci_revid == hw->revision_id &&
|
|
plats[i].subsystem_vid == hw->subsystem_vendor_id &&
|
|
plats[i].subsystem_did == hw->subsystem_id) {
|
|
if (plats[i].patch_flag & ATL1C_LINK_PATCH)
|
|
hw->msi_lnkpatch = true;
|
|
}
|
|
i++;
|
|
}
|
|
|
|
if (hw->device_id == PCI_DEVICE_ID_ATHEROS_L2C_B2 &&
|
|
hw->revision_id == L2CB_V21) {
|
|
/* config acess mode */
|
|
pci_write_config_dword(pdev, REG_PCIE_IND_ACC_ADDR,
|
|
REG_PCIE_DEV_MISC_CTRL);
|
|
pci_read_config_dword(pdev, REG_PCIE_IND_ACC_DATA, &misc_ctrl);
|
|
misc_ctrl &= ~0x100;
|
|
pci_write_config_dword(pdev, REG_PCIE_IND_ACC_ADDR,
|
|
REG_PCIE_DEV_MISC_CTRL);
|
|
pci_write_config_dword(pdev, REG_PCIE_IND_ACC_DATA, misc_ctrl);
|
|
}
|
|
}
|
|
/**
|
|
* atl1c_sw_init - Initialize general software structures (struct atl1c_adapter)
|
|
* @adapter: board private structure to initialize
|
|
*
|
|
* atl1c_sw_init initializes the Adapter private data structure.
|
|
* Fields are initialized based on PCI device information and
|
|
* OS network device settings (MTU size).
|
|
*/
|
|
static int atl1c_sw_init(struct atl1c_adapter *adapter)
|
|
{
|
|
struct atl1c_hw *hw = &adapter->hw;
|
|
struct pci_dev *pdev = adapter->pdev;
|
|
u32 revision;
|
|
|
|
|
|
adapter->wol = 0;
|
|
device_set_wakeup_enable(&pdev->dev, false);
|
|
adapter->link_speed = SPEED_0;
|
|
adapter->link_duplex = FULL_DUPLEX;
|
|
adapter->tpd_ring[0].count = 1024;
|
|
adapter->rfd_ring.count = 512;
|
|
|
|
hw->vendor_id = pdev->vendor;
|
|
hw->device_id = pdev->device;
|
|
hw->subsystem_vendor_id = pdev->subsystem_vendor;
|
|
hw->subsystem_id = pdev->subsystem_device;
|
|
pci_read_config_dword(pdev, PCI_CLASS_REVISION, &revision);
|
|
hw->revision_id = revision & 0xFF;
|
|
/* before link up, we assume hibernate is true */
|
|
hw->hibernate = true;
|
|
hw->media_type = MEDIA_TYPE_AUTO_SENSOR;
|
|
if (atl1c_setup_mac_funcs(hw) != 0) {
|
|
dev_err(&pdev->dev, "set mac function pointers failed\n");
|
|
return -1;
|
|
}
|
|
atl1c_patch_assign(hw);
|
|
|
|
hw->intr_mask = IMR_NORMAL_MASK;
|
|
hw->phy_configured = false;
|
|
hw->preamble_len = 7;
|
|
hw->max_frame_size = adapter->netdev->mtu;
|
|
hw->autoneg_advertised = ADVERTISED_Autoneg;
|
|
hw->indirect_tab = 0xE4E4E4E4;
|
|
hw->base_cpu = 0;
|
|
|
|
hw->ict = 50000; /* 100ms */
|
|
hw->smb_timer = 200000; /* 400ms */
|
|
hw->rx_imt = 200;
|
|
hw->tx_imt = 1000;
|
|
|
|
hw->tpd_burst = 5;
|
|
hw->rfd_burst = 8;
|
|
hw->dma_order = atl1c_dma_ord_out;
|
|
hw->dmar_block = atl1c_dma_req_1024;
|
|
|
|
if (atl1c_alloc_queues(adapter)) {
|
|
dev_err(&pdev->dev, "Unable to allocate memory for queues\n");
|
|
return -ENOMEM;
|
|
}
|
|
/* TODO */
|
|
atl1c_set_rxbufsize(adapter, adapter->netdev);
|
|
atomic_set(&adapter->irq_sem, 1);
|
|
spin_lock_init(&adapter->mdio_lock);
|
|
spin_lock_init(&adapter->tx_lock);
|
|
set_bit(__AT_DOWN, &adapter->flags);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static inline void atl1c_clean_buffer(struct pci_dev *pdev,
|
|
struct atl1c_buffer *buffer_info, int in_irq)
|
|
{
|
|
u16 pci_driection;
|
|
if (buffer_info->flags & ATL1C_BUFFER_FREE)
|
|
return;
|
|
if (buffer_info->dma) {
|
|
if (buffer_info->flags & ATL1C_PCIMAP_FROMDEVICE)
|
|
pci_driection = PCI_DMA_FROMDEVICE;
|
|
else
|
|
pci_driection = PCI_DMA_TODEVICE;
|
|
|
|
if (buffer_info->flags & ATL1C_PCIMAP_SINGLE)
|
|
pci_unmap_single(pdev, buffer_info->dma,
|
|
buffer_info->length, pci_driection);
|
|
else if (buffer_info->flags & ATL1C_PCIMAP_PAGE)
|
|
pci_unmap_page(pdev, buffer_info->dma,
|
|
buffer_info->length, pci_driection);
|
|
}
|
|
if (buffer_info->skb) {
|
|
if (in_irq)
|
|
dev_kfree_skb_irq(buffer_info->skb);
|
|
else
|
|
dev_kfree_skb(buffer_info->skb);
|
|
}
|
|
buffer_info->dma = 0;
|
|
buffer_info->skb = NULL;
|
|
ATL1C_SET_BUFFER_STATE(buffer_info, ATL1C_BUFFER_FREE);
|
|
}
|
|
/**
|
|
* atl1c_clean_tx_ring - Free Tx-skb
|
|
* @adapter: board private structure
|
|
*/
|
|
static void atl1c_clean_tx_ring(struct atl1c_adapter *adapter,
|
|
enum atl1c_trans_queue type)
|
|
{
|
|
struct atl1c_tpd_ring *tpd_ring = &adapter->tpd_ring[type];
|
|
struct atl1c_buffer *buffer_info;
|
|
struct pci_dev *pdev = adapter->pdev;
|
|
u16 index, ring_count;
|
|
|
|
ring_count = tpd_ring->count;
|
|
for (index = 0; index < ring_count; index++) {
|
|
buffer_info = &tpd_ring->buffer_info[index];
|
|
atl1c_clean_buffer(pdev, buffer_info, 0);
|
|
}
|
|
|
|
/* Zero out Tx-buffers */
|
|
memset(tpd_ring->desc, 0, sizeof(struct atl1c_tpd_desc) *
|
|
ring_count);
|
|
atomic_set(&tpd_ring->next_to_clean, 0);
|
|
tpd_ring->next_to_use = 0;
|
|
}
|
|
|
|
/**
|
|
* atl1c_clean_rx_ring - Free rx-reservation skbs
|
|
* @adapter: board private structure
|
|
*/
|
|
static void atl1c_clean_rx_ring(struct atl1c_adapter *adapter)
|
|
{
|
|
struct atl1c_rfd_ring *rfd_ring = &adapter->rfd_ring;
|
|
struct atl1c_rrd_ring *rrd_ring = &adapter->rrd_ring;
|
|
struct atl1c_buffer *buffer_info;
|
|
struct pci_dev *pdev = adapter->pdev;
|
|
int j;
|
|
|
|
for (j = 0; j < rfd_ring->count; j++) {
|
|
buffer_info = &rfd_ring->buffer_info[j];
|
|
atl1c_clean_buffer(pdev, buffer_info, 0);
|
|
}
|
|
/* zero out the descriptor ring */
|
|
memset(rfd_ring->desc, 0, rfd_ring->size);
|
|
rfd_ring->next_to_clean = 0;
|
|
rfd_ring->next_to_use = 0;
|
|
rrd_ring->next_to_use = 0;
|
|
rrd_ring->next_to_clean = 0;
|
|
}
|
|
|
|
/*
|
|
* Read / Write Ptr Initialize:
|
|
*/
|
|
static void atl1c_init_ring_ptrs(struct atl1c_adapter *adapter)
|
|
{
|
|
struct atl1c_tpd_ring *tpd_ring = adapter->tpd_ring;
|
|
struct atl1c_rfd_ring *rfd_ring = &adapter->rfd_ring;
|
|
struct atl1c_rrd_ring *rrd_ring = &adapter->rrd_ring;
|
|
struct atl1c_buffer *buffer_info;
|
|
int i, j;
|
|
|
|
for (i = 0; i < AT_MAX_TRANSMIT_QUEUE; i++) {
|
|
tpd_ring[i].next_to_use = 0;
|
|
atomic_set(&tpd_ring[i].next_to_clean, 0);
|
|
buffer_info = tpd_ring[i].buffer_info;
|
|
for (j = 0; j < tpd_ring->count; j++)
|
|
ATL1C_SET_BUFFER_STATE(&buffer_info[i],
|
|
ATL1C_BUFFER_FREE);
|
|
}
|
|
rfd_ring->next_to_use = 0;
|
|
rfd_ring->next_to_clean = 0;
|
|
rrd_ring->next_to_use = 0;
|
|
rrd_ring->next_to_clean = 0;
|
|
for (j = 0; j < rfd_ring->count; j++) {
|
|
buffer_info = &rfd_ring->buffer_info[j];
|
|
ATL1C_SET_BUFFER_STATE(buffer_info, ATL1C_BUFFER_FREE);
|
|
}
|
|
}
|
|
|
|
/**
|
|
* atl1c_free_ring_resources - Free Tx / RX descriptor Resources
|
|
* @adapter: board private structure
|
|
*
|
|
* Free all transmit software resources
|
|
*/
|
|
static void atl1c_free_ring_resources(struct atl1c_adapter *adapter)
|
|
{
|
|
struct pci_dev *pdev = adapter->pdev;
|
|
|
|
pci_free_consistent(pdev, adapter->ring_header.size,
|
|
adapter->ring_header.desc,
|
|
adapter->ring_header.dma);
|
|
adapter->ring_header.desc = NULL;
|
|
|
|
/* Note: just free tdp_ring.buffer_info,
|
|
* it contain rfd_ring.buffer_info, do not double free */
|
|
if (adapter->tpd_ring[0].buffer_info) {
|
|
kfree(adapter->tpd_ring[0].buffer_info);
|
|
adapter->tpd_ring[0].buffer_info = NULL;
|
|
}
|
|
}
|
|
|
|
/**
|
|
* atl1c_setup_mem_resources - allocate Tx / RX descriptor resources
|
|
* @adapter: board private structure
|
|
*
|
|
* Return 0 on success, negative on failure
|
|
*/
|
|
static int atl1c_setup_ring_resources(struct atl1c_adapter *adapter)
|
|
{
|
|
struct pci_dev *pdev = adapter->pdev;
|
|
struct atl1c_tpd_ring *tpd_ring = adapter->tpd_ring;
|
|
struct atl1c_rfd_ring *rfd_ring = &adapter->rfd_ring;
|
|
struct atl1c_rrd_ring *rrd_ring = &adapter->rrd_ring;
|
|
struct atl1c_ring_header *ring_header = &adapter->ring_header;
|
|
int size;
|
|
int i;
|
|
int count = 0;
|
|
int rx_desc_count = 0;
|
|
u32 offset = 0;
|
|
|
|
rrd_ring->count = rfd_ring->count;
|
|
for (i = 1; i < AT_MAX_TRANSMIT_QUEUE; i++)
|
|
tpd_ring[i].count = tpd_ring[0].count;
|
|
|
|
/* 2 tpd queue, one high priority queue,
|
|
* another normal priority queue */
|
|
size = sizeof(struct atl1c_buffer) * (tpd_ring->count * 2 +
|
|
rfd_ring->count);
|
|
tpd_ring->buffer_info = kzalloc(size, GFP_KERNEL);
|
|
if (unlikely(!tpd_ring->buffer_info))
|
|
goto err_nomem;
|
|
|
|
for (i = 0; i < AT_MAX_TRANSMIT_QUEUE; i++) {
|
|
tpd_ring[i].buffer_info =
|
|
(tpd_ring->buffer_info + count);
|
|
count += tpd_ring[i].count;
|
|
}
|
|
|
|
rfd_ring->buffer_info =
|
|
(tpd_ring->buffer_info + count);
|
|
count += rfd_ring->count;
|
|
rx_desc_count += rfd_ring->count;
|
|
|
|
/*
|
|
* real ring DMA buffer
|
|
* each ring/block may need up to 8 bytes for alignment, hence the
|
|
* additional bytes tacked onto the end.
|
|
*/
|
|
ring_header->size = size =
|
|
sizeof(struct atl1c_tpd_desc) * tpd_ring->count * 2 +
|
|
sizeof(struct atl1c_rx_free_desc) * rx_desc_count +
|
|
sizeof(struct atl1c_recv_ret_status) * rx_desc_count +
|
|
8 * 4;
|
|
|
|
ring_header->desc = pci_alloc_consistent(pdev, ring_header->size,
|
|
&ring_header->dma);
|
|
if (unlikely(!ring_header->desc)) {
|
|
dev_err(&pdev->dev, "pci_alloc_consistend failed\n");
|
|
goto err_nomem;
|
|
}
|
|
memset(ring_header->desc, 0, ring_header->size);
|
|
/* init TPD ring */
|
|
|
|
tpd_ring[0].dma = roundup(ring_header->dma, 8);
|
|
offset = tpd_ring[0].dma - ring_header->dma;
|
|
for (i = 0; i < AT_MAX_TRANSMIT_QUEUE; i++) {
|
|
tpd_ring[i].dma = ring_header->dma + offset;
|
|
tpd_ring[i].desc = (u8 *) ring_header->desc + offset;
|
|
tpd_ring[i].size =
|
|
sizeof(struct atl1c_tpd_desc) * tpd_ring[i].count;
|
|
offset += roundup(tpd_ring[i].size, 8);
|
|
}
|
|
/* init RFD ring */
|
|
rfd_ring->dma = ring_header->dma + offset;
|
|
rfd_ring->desc = (u8 *) ring_header->desc + offset;
|
|
rfd_ring->size = sizeof(struct atl1c_rx_free_desc) * rfd_ring->count;
|
|
offset += roundup(rfd_ring->size, 8);
|
|
|
|
/* init RRD ring */
|
|
rrd_ring->dma = ring_header->dma + offset;
|
|
rrd_ring->desc = (u8 *) ring_header->desc + offset;
|
|
rrd_ring->size = sizeof(struct atl1c_recv_ret_status) *
|
|
rrd_ring->count;
|
|
offset += roundup(rrd_ring->size, 8);
|
|
|
|
return 0;
|
|
|
|
err_nomem:
|
|
kfree(tpd_ring->buffer_info);
|
|
return -ENOMEM;
|
|
}
|
|
|
|
static void atl1c_configure_des_ring(struct atl1c_adapter *adapter)
|
|
{
|
|
struct atl1c_hw *hw = &adapter->hw;
|
|
struct atl1c_rfd_ring *rfd_ring = &adapter->rfd_ring;
|
|
struct atl1c_rrd_ring *rrd_ring = &adapter->rrd_ring;
|
|
struct atl1c_tpd_ring *tpd_ring = (struct atl1c_tpd_ring *)
|
|
adapter->tpd_ring;
|
|
|
|
/* TPD */
|
|
AT_WRITE_REG(hw, REG_TX_BASE_ADDR_HI,
|
|
(u32)((tpd_ring[atl1c_trans_normal].dma &
|
|
AT_DMA_HI_ADDR_MASK) >> 32));
|
|
/* just enable normal priority TX queue */
|
|
AT_WRITE_REG(hw, REG_TPD_PRI0_ADDR_LO,
|
|
(u32)(tpd_ring[atl1c_trans_normal].dma &
|
|
AT_DMA_LO_ADDR_MASK));
|
|
AT_WRITE_REG(hw, REG_TPD_PRI1_ADDR_LO,
|
|
(u32)(tpd_ring[atl1c_trans_high].dma &
|
|
AT_DMA_LO_ADDR_MASK));
|
|
AT_WRITE_REG(hw, REG_TPD_RING_SIZE,
|
|
(u32)(tpd_ring[0].count & TPD_RING_SIZE_MASK));
|
|
|
|
|
|
/* RFD */
|
|
AT_WRITE_REG(hw, REG_RX_BASE_ADDR_HI,
|
|
(u32)((rfd_ring->dma & AT_DMA_HI_ADDR_MASK) >> 32));
|
|
AT_WRITE_REG(hw, REG_RFD0_HEAD_ADDR_LO,
|
|
(u32)(rfd_ring->dma & AT_DMA_LO_ADDR_MASK));
|
|
|
|
AT_WRITE_REG(hw, REG_RFD_RING_SIZE,
|
|
rfd_ring->count & RFD_RING_SIZE_MASK);
|
|
AT_WRITE_REG(hw, REG_RX_BUF_SIZE,
|
|
adapter->rx_buffer_len & RX_BUF_SIZE_MASK);
|
|
|
|
/* RRD */
|
|
AT_WRITE_REG(hw, REG_RRD0_HEAD_ADDR_LO,
|
|
(u32)(rrd_ring->dma & AT_DMA_LO_ADDR_MASK));
|
|
AT_WRITE_REG(hw, REG_RRD_RING_SIZE,
|
|
(rrd_ring->count & RRD_RING_SIZE_MASK));
|
|
|
|
if (hw->nic_type == athr_l2c_b) {
|
|
AT_WRITE_REG(hw, REG_SRAM_RXF_LEN, 0x02a0L);
|
|
AT_WRITE_REG(hw, REG_SRAM_TXF_LEN, 0x0100L);
|
|
AT_WRITE_REG(hw, REG_SRAM_RXF_ADDR, 0x029f0000L);
|
|
AT_WRITE_REG(hw, REG_SRAM_RFD0_INFO, 0x02bf02a0L);
|
|
AT_WRITE_REG(hw, REG_SRAM_TXF_ADDR, 0x03bf02c0L);
|
|
AT_WRITE_REG(hw, REG_SRAM_TRD_ADDR, 0x03df03c0L);
|
|
AT_WRITE_REG(hw, REG_TXF_WATER_MARK, 0); /* TX watermark, to enter l1 state.*/
|
|
AT_WRITE_REG(hw, REG_RXD_DMA_CTRL, 0); /* RXD threshold.*/
|
|
}
|
|
/* Load all of base address above */
|
|
AT_WRITE_REG(hw, REG_LOAD_PTR, 1);
|
|
}
|
|
|
|
static void atl1c_configure_tx(struct atl1c_adapter *adapter)
|
|
{
|
|
struct atl1c_hw *hw = &adapter->hw;
|
|
int max_pay_load;
|
|
u16 tx_offload_thresh;
|
|
u32 txq_ctrl_data;
|
|
|
|
tx_offload_thresh = MAX_TSO_FRAME_SIZE;
|
|
AT_WRITE_REG(hw, REG_TX_TSO_OFFLOAD_THRESH,
|
|
(tx_offload_thresh >> 3) & TX_TSO_OFFLOAD_THRESH_MASK);
|
|
max_pay_load = pcie_get_readrq(adapter->pdev) >> 8;
|
|
hw->dmar_block = min_t(u32, max_pay_load, hw->dmar_block);
|
|
/*
|
|
* if BIOS had changed the dam-read-max-length to an invalid value,
|
|
* restore it to default value
|
|
*/
|
|
if (hw->dmar_block < DEVICE_CTRL_MAXRRS_MIN) {
|
|
pcie_set_readrq(adapter->pdev, 128 << DEVICE_CTRL_MAXRRS_MIN);
|
|
hw->dmar_block = DEVICE_CTRL_MAXRRS_MIN;
|
|
}
|
|
txq_ctrl_data =
|
|
hw->nic_type == athr_l2c_b || hw->nic_type == athr_l2c_b2 ?
|
|
L2CB_TXQ_CFGV : L1C_TXQ_CFGV;
|
|
|
|
AT_WRITE_REG(hw, REG_TXQ_CTRL, txq_ctrl_data);
|
|
}
|
|
|
|
static void atl1c_configure_rx(struct atl1c_adapter *adapter)
|
|
{
|
|
struct atl1c_hw *hw = &adapter->hw;
|
|
u32 rxq_ctrl_data;
|
|
|
|
rxq_ctrl_data = (hw->rfd_burst & RXQ_RFD_BURST_NUM_MASK) <<
|
|
RXQ_RFD_BURST_NUM_SHIFT;
|
|
|
|
if (hw->ctrl_flags & ATL1C_RX_IPV6_CHKSUM)
|
|
rxq_ctrl_data |= IPV6_CHKSUM_CTRL_EN;
|
|
|
|
/* aspm for gigabit */
|
|
if (hw->nic_type != athr_l1d_2 && (hw->device_id & 1) != 0)
|
|
rxq_ctrl_data = FIELD_SETX(rxq_ctrl_data, ASPM_THRUPUT_LIMIT,
|
|
ASPM_THRUPUT_LIMIT_100M);
|
|
|
|
AT_WRITE_REG(hw, REG_RXQ_CTRL, rxq_ctrl_data);
|
|
}
|
|
|
|
static void atl1c_configure_dma(struct atl1c_adapter *adapter)
|
|
{
|
|
struct atl1c_hw *hw = &adapter->hw;
|
|
u32 dma_ctrl_data;
|
|
|
|
dma_ctrl_data = FIELDX(DMA_CTRL_RORDER_MODE, DMA_CTRL_RORDER_MODE_OUT) |
|
|
DMA_CTRL_RREQ_PRI_DATA |
|
|
FIELDX(DMA_CTRL_RREQ_BLEN, hw->dmar_block) |
|
|
FIELDX(DMA_CTRL_WDLY_CNT, DMA_CTRL_WDLY_CNT_DEF) |
|
|
FIELDX(DMA_CTRL_RDLY_CNT, DMA_CTRL_RDLY_CNT_DEF);
|
|
|
|
AT_WRITE_REG(hw, REG_DMA_CTRL, dma_ctrl_data);
|
|
}
|
|
|
|
/*
|
|
* Stop the mac, transmit and receive units
|
|
* hw - Struct containing variables accessed by shared code
|
|
* return : 0 or idle status (if error)
|
|
*/
|
|
static int atl1c_stop_mac(struct atl1c_hw *hw)
|
|
{
|
|
u32 data;
|
|
|
|
AT_READ_REG(hw, REG_RXQ_CTRL, &data);
|
|
data &= ~RXQ_CTRL_EN;
|
|
AT_WRITE_REG(hw, REG_RXQ_CTRL, data);
|
|
|
|
AT_READ_REG(hw, REG_TXQ_CTRL, &data);
|
|
data &= ~TXQ_CTRL_EN;
|
|
AT_WRITE_REG(hw, REG_TXQ_CTRL, data);
|
|
|
|
atl1c_wait_until_idle(hw, IDLE_STATUS_RXQ_BUSY | IDLE_STATUS_TXQ_BUSY);
|
|
|
|
AT_READ_REG(hw, REG_MAC_CTRL, &data);
|
|
data &= ~(MAC_CTRL_TX_EN | MAC_CTRL_RX_EN);
|
|
AT_WRITE_REG(hw, REG_MAC_CTRL, data);
|
|
|
|
return (int)atl1c_wait_until_idle(hw,
|
|
IDLE_STATUS_TXMAC_BUSY | IDLE_STATUS_RXMAC_BUSY);
|
|
}
|
|
|
|
static void atl1c_start_mac(struct atl1c_adapter *adapter)
|
|
{
|
|
struct atl1c_hw *hw = &adapter->hw;
|
|
u32 mac, txq, rxq;
|
|
|
|
hw->mac_duplex = adapter->link_duplex == FULL_DUPLEX ? true : false;
|
|
hw->mac_speed = adapter->link_speed == SPEED_1000 ?
|
|
atl1c_mac_speed_1000 : atl1c_mac_speed_10_100;
|
|
|
|
AT_READ_REG(hw, REG_TXQ_CTRL, &txq);
|
|
AT_READ_REG(hw, REG_RXQ_CTRL, &rxq);
|
|
AT_READ_REG(hw, REG_MAC_CTRL, &mac);
|
|
|
|
txq |= TXQ_CTRL_EN;
|
|
rxq |= RXQ_CTRL_EN;
|
|
mac |= MAC_CTRL_TX_EN | MAC_CTRL_TX_FLOW |
|
|
MAC_CTRL_RX_EN | MAC_CTRL_RX_FLOW |
|
|
MAC_CTRL_ADD_CRC | MAC_CTRL_PAD |
|
|
MAC_CTRL_BC_EN | MAC_CTRL_SINGLE_PAUSE_EN |
|
|
MAC_CTRL_HASH_ALG_CRC32;
|
|
if (hw->mac_duplex)
|
|
mac |= MAC_CTRL_DUPLX;
|
|
else
|
|
mac &= ~MAC_CTRL_DUPLX;
|
|
mac = FIELD_SETX(mac, MAC_CTRL_SPEED, hw->mac_speed);
|
|
mac = FIELD_SETX(mac, MAC_CTRL_PRMLEN, hw->preamble_len);
|
|
|
|
AT_WRITE_REG(hw, REG_TXQ_CTRL, txq);
|
|
AT_WRITE_REG(hw, REG_RXQ_CTRL, rxq);
|
|
AT_WRITE_REG(hw, REG_MAC_CTRL, mac);
|
|
}
|
|
|
|
/*
|
|
* Reset the transmit and receive units; mask and clear all interrupts.
|
|
* hw - Struct containing variables accessed by shared code
|
|
* return : 0 or idle status (if error)
|
|
*/
|
|
static int atl1c_reset_mac(struct atl1c_hw *hw)
|
|
{
|
|
struct atl1c_adapter *adapter = hw->adapter;
|
|
struct pci_dev *pdev = adapter->pdev;
|
|
u32 ctrl_data = 0;
|
|
|
|
atl1c_stop_mac(hw);
|
|
/*
|
|
* Issue Soft Reset to the MAC. This will reset the chip's
|
|
* transmit, receive, DMA. It will not effect
|
|
* the current PCI configuration. The global reset bit is self-
|
|
* clearing, and should clear within a microsecond.
|
|
*/
|
|
AT_READ_REG(hw, REG_MASTER_CTRL, &ctrl_data);
|
|
ctrl_data |= MASTER_CTRL_OOB_DIS;
|
|
AT_WRITE_REG(hw, REG_MASTER_CTRL, ctrl_data | MASTER_CTRL_SOFT_RST);
|
|
|
|
AT_WRITE_FLUSH(hw);
|
|
msleep(10);
|
|
/* Wait at least 10ms for All module to be Idle */
|
|
|
|
if (atl1c_wait_until_idle(hw, IDLE_STATUS_MASK)) {
|
|
dev_err(&pdev->dev,
|
|
"MAC state machine can't be idle since"
|
|
" disabled for 10ms second\n");
|
|
return -1;
|
|
}
|
|
AT_WRITE_REG(hw, REG_MASTER_CTRL, ctrl_data);
|
|
|
|
/* driver control speed/duplex */
|
|
AT_READ_REG(hw, REG_MAC_CTRL, &ctrl_data);
|
|
AT_WRITE_REG(hw, REG_MAC_CTRL, ctrl_data | MAC_CTRL_SPEED_MODE_SW);
|
|
|
|
/* clk switch setting */
|
|
AT_READ_REG(hw, REG_SERDES, &ctrl_data);
|
|
switch (hw->nic_type) {
|
|
case athr_l2c_b:
|
|
ctrl_data &= ~(SERDES_PHY_CLK_SLOWDOWN |
|
|
SERDES_MAC_CLK_SLOWDOWN);
|
|
AT_WRITE_REG(hw, REG_SERDES, ctrl_data);
|
|
break;
|
|
case athr_l2c_b2:
|
|
case athr_l1d_2:
|
|
ctrl_data |= SERDES_PHY_CLK_SLOWDOWN | SERDES_MAC_CLK_SLOWDOWN;
|
|
AT_WRITE_REG(hw, REG_SERDES, ctrl_data);
|
|
break;
|
|
default:
|
|
break;
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
static void atl1c_disable_l0s_l1(struct atl1c_hw *hw)
|
|
{
|
|
u16 ctrl_flags = hw->ctrl_flags;
|
|
|
|
hw->ctrl_flags &= ~(ATL1C_ASPM_L0S_SUPPORT | ATL1C_ASPM_L1_SUPPORT);
|
|
atl1c_set_aspm(hw, SPEED_0);
|
|
hw->ctrl_flags = ctrl_flags;
|
|
}
|
|
|
|
/*
|
|
* Set ASPM state.
|
|
* Enable/disable L0s/L1 depend on link state.
|
|
*/
|
|
static void atl1c_set_aspm(struct atl1c_hw *hw, u16 link_speed)
|
|
{
|
|
u32 pm_ctrl_data;
|
|
u32 link_l1_timer;
|
|
|
|
AT_READ_REG(hw, REG_PM_CTRL, &pm_ctrl_data);
|
|
pm_ctrl_data &= ~(PM_CTRL_ASPM_L1_EN |
|
|
PM_CTRL_ASPM_L0S_EN |
|
|
PM_CTRL_MAC_ASPM_CHK);
|
|
/* L1 timer */
|
|
if (hw->nic_type == athr_l2c_b2 || hw->nic_type == athr_l1d_2) {
|
|
pm_ctrl_data &= ~PMCTRL_TXL1_AFTER_L0S;
|
|
link_l1_timer =
|
|
link_speed == SPEED_1000 || link_speed == SPEED_100 ?
|
|
L1D_PMCTRL_L1_ENTRY_TM_16US : 1;
|
|
pm_ctrl_data = FIELD_SETX(pm_ctrl_data,
|
|
L1D_PMCTRL_L1_ENTRY_TM, link_l1_timer);
|
|
} else {
|
|
link_l1_timer = hw->nic_type == athr_l2c_b ?
|
|
L2CB1_PM_CTRL_L1_ENTRY_TM : L1C_PM_CTRL_L1_ENTRY_TM;
|
|
if (link_speed != SPEED_1000 && link_speed != SPEED_100)
|
|
link_l1_timer = 1;
|
|
pm_ctrl_data = FIELD_SETX(pm_ctrl_data,
|
|
PM_CTRL_L1_ENTRY_TIMER, link_l1_timer);
|
|
}
|
|
|
|
/* L0S/L1 enable */
|
|
if ((hw->ctrl_flags & ATL1C_ASPM_L0S_SUPPORT) && link_speed != SPEED_0)
|
|
pm_ctrl_data |= PM_CTRL_ASPM_L0S_EN | PM_CTRL_MAC_ASPM_CHK;
|
|
if (hw->ctrl_flags & ATL1C_ASPM_L1_SUPPORT)
|
|
pm_ctrl_data |= PM_CTRL_ASPM_L1_EN | PM_CTRL_MAC_ASPM_CHK;
|
|
|
|
/* l2cb & l1d & l2cb2 & l1d2 */
|
|
if (hw->nic_type == athr_l2c_b || hw->nic_type == athr_l1d ||
|
|
hw->nic_type == athr_l2c_b2 || hw->nic_type == athr_l1d_2) {
|
|
pm_ctrl_data = FIELD_SETX(pm_ctrl_data,
|
|
PM_CTRL_PM_REQ_TIMER, PM_CTRL_PM_REQ_TO_DEF);
|
|
pm_ctrl_data |= PM_CTRL_RCVR_WT_TIMER |
|
|
PM_CTRL_SERDES_PD_EX_L1 |
|
|
PM_CTRL_CLK_SWH_L1;
|
|
pm_ctrl_data &= ~(PM_CTRL_SERDES_L1_EN |
|
|
PM_CTRL_SERDES_PLL_L1_EN |
|
|
PM_CTRL_SERDES_BUFS_RX_L1_EN |
|
|
PM_CTRL_SA_DLY_EN |
|
|
PM_CTRL_HOTRST);
|
|
/* disable l0s if link down or l2cb */
|
|
if (link_speed == SPEED_0 || hw->nic_type == athr_l2c_b)
|
|
pm_ctrl_data &= ~PM_CTRL_ASPM_L0S_EN;
|
|
} else { /* l1c */
|
|
pm_ctrl_data =
|
|
FIELD_SETX(pm_ctrl_data, PM_CTRL_L1_ENTRY_TIMER, 0);
|
|
if (link_speed != SPEED_0) {
|
|
pm_ctrl_data |= PM_CTRL_SERDES_L1_EN |
|
|
PM_CTRL_SERDES_PLL_L1_EN |
|
|
PM_CTRL_SERDES_BUFS_RX_L1_EN;
|
|
pm_ctrl_data &= ~(PM_CTRL_SERDES_PD_EX_L1 |
|
|
PM_CTRL_CLK_SWH_L1 |
|
|
PM_CTRL_ASPM_L0S_EN |
|
|
PM_CTRL_ASPM_L1_EN);
|
|
} else { /* link down */
|
|
pm_ctrl_data |= PM_CTRL_CLK_SWH_L1;
|
|
pm_ctrl_data &= ~(PM_CTRL_SERDES_L1_EN |
|
|
PM_CTRL_SERDES_PLL_L1_EN |
|
|
PM_CTRL_SERDES_BUFS_RX_L1_EN |
|
|
PM_CTRL_ASPM_L0S_EN);
|
|
}
|
|
}
|
|
AT_WRITE_REG(hw, REG_PM_CTRL, pm_ctrl_data);
|
|
|
|
return;
|
|
}
|
|
|
|
/**
|
|
* atl1c_configure - Configure Transmit&Receive Unit after Reset
|
|
* @adapter: board private structure
|
|
*
|
|
* Configure the Tx /Rx unit of the MAC after a reset.
|
|
*/
|
|
static int atl1c_configure_mac(struct atl1c_adapter *adapter)
|
|
{
|
|
struct atl1c_hw *hw = &adapter->hw;
|
|
u32 master_ctrl_data = 0;
|
|
u32 intr_modrt_data;
|
|
u32 data;
|
|
|
|
AT_READ_REG(hw, REG_MASTER_CTRL, &master_ctrl_data);
|
|
master_ctrl_data &= ~(MASTER_CTRL_TX_ITIMER_EN |
|
|
MASTER_CTRL_RX_ITIMER_EN |
|
|
MASTER_CTRL_INT_RDCLR);
|
|
/* clear interrupt status */
|
|
AT_WRITE_REG(hw, REG_ISR, 0xFFFFFFFF);
|
|
/* Clear any WOL status */
|
|
AT_WRITE_REG(hw, REG_WOL_CTRL, 0);
|
|
/* set Interrupt Clear Timer
|
|
* HW will enable self to assert interrupt event to system after
|
|
* waiting x-time for software to notify it accept interrupt.
|
|
*/
|
|
|
|
data = CLK_GATING_EN_ALL;
|
|
if (hw->ctrl_flags & ATL1C_CLK_GATING_EN) {
|
|
if (hw->nic_type == athr_l2c_b)
|
|
data &= ~CLK_GATING_RXMAC_EN;
|
|
} else
|
|
data = 0;
|
|
AT_WRITE_REG(hw, REG_CLK_GATING_CTRL, data);
|
|
|
|
AT_WRITE_REG(hw, REG_INT_RETRIG_TIMER,
|
|
hw->ict & INT_RETRIG_TIMER_MASK);
|
|
|
|
atl1c_configure_des_ring(adapter);
|
|
|
|
if (hw->ctrl_flags & ATL1C_INTR_MODRT_ENABLE) {
|
|
intr_modrt_data = (hw->tx_imt & IRQ_MODRT_TIMER_MASK) <<
|
|
IRQ_MODRT_TX_TIMER_SHIFT;
|
|
intr_modrt_data |= (hw->rx_imt & IRQ_MODRT_TIMER_MASK) <<
|
|
IRQ_MODRT_RX_TIMER_SHIFT;
|
|
AT_WRITE_REG(hw, REG_IRQ_MODRT_TIMER_INIT, intr_modrt_data);
|
|
master_ctrl_data |=
|
|
MASTER_CTRL_TX_ITIMER_EN | MASTER_CTRL_RX_ITIMER_EN;
|
|
}
|
|
|
|
if (hw->ctrl_flags & ATL1C_INTR_CLEAR_ON_READ)
|
|
master_ctrl_data |= MASTER_CTRL_INT_RDCLR;
|
|
|
|
master_ctrl_data |= MASTER_CTRL_SA_TIMER_EN;
|
|
AT_WRITE_REG(hw, REG_MASTER_CTRL, master_ctrl_data);
|
|
|
|
AT_WRITE_REG(hw, REG_SMB_STAT_TIMER,
|
|
hw->smb_timer & SMB_STAT_TIMER_MASK);
|
|
|
|
/* set MTU */
|
|
AT_WRITE_REG(hw, REG_MTU, hw->max_frame_size + ETH_HLEN +
|
|
VLAN_HLEN + ETH_FCS_LEN);
|
|
|
|
atl1c_configure_tx(adapter);
|
|
atl1c_configure_rx(adapter);
|
|
atl1c_configure_dma(adapter);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int atl1c_configure(struct atl1c_adapter *adapter)
|
|
{
|
|
struct net_device *netdev = adapter->netdev;
|
|
int num;
|
|
|
|
atl1c_init_ring_ptrs(adapter);
|
|
atl1c_set_multi(netdev);
|
|
atl1c_restore_vlan(adapter);
|
|
|
|
num = atl1c_alloc_rx_buffer(adapter);
|
|
if (unlikely(num == 0))
|
|
return -ENOMEM;
|
|
|
|
if (atl1c_configure_mac(adapter))
|
|
return -EIO;
|
|
|
|
return 0;
|
|
}
|
|
|
|
static void atl1c_update_hw_stats(struct atl1c_adapter *adapter)
|
|
{
|
|
u16 hw_reg_addr = 0;
|
|
unsigned long *stats_item = NULL;
|
|
u32 data;
|
|
|
|
/* update rx status */
|
|
hw_reg_addr = REG_MAC_RX_STATUS_BIN;
|
|
stats_item = &adapter->hw_stats.rx_ok;
|
|
while (hw_reg_addr <= REG_MAC_RX_STATUS_END) {
|
|
AT_READ_REG(&adapter->hw, hw_reg_addr, &data);
|
|
*stats_item += data;
|
|
stats_item++;
|
|
hw_reg_addr += 4;
|
|
}
|
|
/* update tx status */
|
|
hw_reg_addr = REG_MAC_TX_STATUS_BIN;
|
|
stats_item = &adapter->hw_stats.tx_ok;
|
|
while (hw_reg_addr <= REG_MAC_TX_STATUS_END) {
|
|
AT_READ_REG(&adapter->hw, hw_reg_addr, &data);
|
|
*stats_item += data;
|
|
stats_item++;
|
|
hw_reg_addr += 4;
|
|
}
|
|
}
|
|
|
|
/**
|
|
* atl1c_get_stats - Get System Network Statistics
|
|
* @netdev: network interface device structure
|
|
*
|
|
* Returns the address of the device statistics structure.
|
|
* The statistics are actually updated from the timer callback.
|
|
*/
|
|
static struct net_device_stats *atl1c_get_stats(struct net_device *netdev)
|
|
{
|
|
struct atl1c_adapter *adapter = netdev_priv(netdev);
|
|
struct atl1c_hw_stats *hw_stats = &adapter->hw_stats;
|
|
struct net_device_stats *net_stats = &netdev->stats;
|
|
|
|
atl1c_update_hw_stats(adapter);
|
|
net_stats->rx_packets = hw_stats->rx_ok;
|
|
net_stats->tx_packets = hw_stats->tx_ok;
|
|
net_stats->rx_bytes = hw_stats->rx_byte_cnt;
|
|
net_stats->tx_bytes = hw_stats->tx_byte_cnt;
|
|
net_stats->multicast = hw_stats->rx_mcast;
|
|
net_stats->collisions = hw_stats->tx_1_col +
|
|
hw_stats->tx_2_col * 2 +
|
|
hw_stats->tx_late_col + hw_stats->tx_abort_col;
|
|
net_stats->rx_errors = hw_stats->rx_frag + hw_stats->rx_fcs_err +
|
|
hw_stats->rx_len_err + hw_stats->rx_sz_ov +
|
|
hw_stats->rx_rrd_ov + hw_stats->rx_align_err;
|
|
net_stats->rx_fifo_errors = hw_stats->rx_rxf_ov;
|
|
net_stats->rx_length_errors = hw_stats->rx_len_err;
|
|
net_stats->rx_crc_errors = hw_stats->rx_fcs_err;
|
|
net_stats->rx_frame_errors = hw_stats->rx_align_err;
|
|
net_stats->rx_over_errors = hw_stats->rx_rrd_ov + hw_stats->rx_rxf_ov;
|
|
|
|
net_stats->rx_missed_errors = hw_stats->rx_rrd_ov + hw_stats->rx_rxf_ov;
|
|
|
|
net_stats->tx_errors = hw_stats->tx_late_col + hw_stats->tx_abort_col +
|
|
hw_stats->tx_underrun + hw_stats->tx_trunc;
|
|
net_stats->tx_fifo_errors = hw_stats->tx_underrun;
|
|
net_stats->tx_aborted_errors = hw_stats->tx_abort_col;
|
|
net_stats->tx_window_errors = hw_stats->tx_late_col;
|
|
|
|
return net_stats;
|
|
}
|
|
|
|
static inline void atl1c_clear_phy_int(struct atl1c_adapter *adapter)
|
|
{
|
|
u16 phy_data;
|
|
|
|
spin_lock(&adapter->mdio_lock);
|
|
atl1c_read_phy_reg(&adapter->hw, MII_ISR, &phy_data);
|
|
spin_unlock(&adapter->mdio_lock);
|
|
}
|
|
|
|
static bool atl1c_clean_tx_irq(struct atl1c_adapter *adapter,
|
|
enum atl1c_trans_queue type)
|
|
{
|
|
struct atl1c_tpd_ring *tpd_ring = &adapter->tpd_ring[type];
|
|
struct atl1c_buffer *buffer_info;
|
|
struct pci_dev *pdev = adapter->pdev;
|
|
u16 next_to_clean = atomic_read(&tpd_ring->next_to_clean);
|
|
u16 hw_next_to_clean;
|
|
u16 reg;
|
|
|
|
reg = type == atl1c_trans_high ? REG_TPD_PRI1_CIDX : REG_TPD_PRI0_CIDX;
|
|
|
|
AT_READ_REGW(&adapter->hw, reg, &hw_next_to_clean);
|
|
|
|
while (next_to_clean != hw_next_to_clean) {
|
|
buffer_info = &tpd_ring->buffer_info[next_to_clean];
|
|
atl1c_clean_buffer(pdev, buffer_info, 1);
|
|
if (++next_to_clean == tpd_ring->count)
|
|
next_to_clean = 0;
|
|
atomic_set(&tpd_ring->next_to_clean, next_to_clean);
|
|
}
|
|
|
|
if (netif_queue_stopped(adapter->netdev) &&
|
|
netif_carrier_ok(adapter->netdev)) {
|
|
netif_wake_queue(adapter->netdev);
|
|
}
|
|
|
|
return true;
|
|
}
|
|
|
|
/**
|
|
* atl1c_intr - Interrupt Handler
|
|
* @irq: interrupt number
|
|
* @data: pointer to a network interface device structure
|
|
*/
|
|
static irqreturn_t atl1c_intr(int irq, void *data)
|
|
{
|
|
struct net_device *netdev = data;
|
|
struct atl1c_adapter *adapter = netdev_priv(netdev);
|
|
struct pci_dev *pdev = adapter->pdev;
|
|
struct atl1c_hw *hw = &adapter->hw;
|
|
int max_ints = AT_MAX_INT_WORK;
|
|
int handled = IRQ_NONE;
|
|
u32 status;
|
|
u32 reg_data;
|
|
|
|
do {
|
|
AT_READ_REG(hw, REG_ISR, ®_data);
|
|
status = reg_data & hw->intr_mask;
|
|
|
|
if (status == 0 || (status & ISR_DIS_INT) != 0) {
|
|
if (max_ints != AT_MAX_INT_WORK)
|
|
handled = IRQ_HANDLED;
|
|
break;
|
|
}
|
|
/* link event */
|
|
if (status & ISR_GPHY)
|
|
atl1c_clear_phy_int(adapter);
|
|
/* Ack ISR */
|
|
AT_WRITE_REG(hw, REG_ISR, status | ISR_DIS_INT);
|
|
if (status & ISR_RX_PKT) {
|
|
if (likely(napi_schedule_prep(&adapter->napi))) {
|
|
hw->intr_mask &= ~ISR_RX_PKT;
|
|
AT_WRITE_REG(hw, REG_IMR, hw->intr_mask);
|
|
__napi_schedule(&adapter->napi);
|
|
}
|
|
}
|
|
if (status & ISR_TX_PKT)
|
|
atl1c_clean_tx_irq(adapter, atl1c_trans_normal);
|
|
|
|
handled = IRQ_HANDLED;
|
|
/* check if PCIE PHY Link down */
|
|
if (status & ISR_ERROR) {
|
|
if (netif_msg_hw(adapter))
|
|
dev_err(&pdev->dev,
|
|
"atl1c hardware error (status = 0x%x)\n",
|
|
status & ISR_ERROR);
|
|
/* reset MAC */
|
|
set_bit(ATL1C_WORK_EVENT_RESET, &adapter->work_event);
|
|
schedule_work(&adapter->common_task);
|
|
return IRQ_HANDLED;
|
|
}
|
|
|
|
if (status & ISR_OVER)
|
|
if (netif_msg_intr(adapter))
|
|
dev_warn(&pdev->dev,
|
|
"TX/RX overflow (status = 0x%x)\n",
|
|
status & ISR_OVER);
|
|
|
|
/* link event */
|
|
if (status & (ISR_GPHY | ISR_MANUAL)) {
|
|
netdev->stats.tx_carrier_errors++;
|
|
atl1c_link_chg_event(adapter);
|
|
break;
|
|
}
|
|
|
|
} while (--max_ints > 0);
|
|
/* re-enable Interrupt*/
|
|
AT_WRITE_REG(&adapter->hw, REG_ISR, 0);
|
|
return handled;
|
|
}
|
|
|
|
static inline void atl1c_rx_checksum(struct atl1c_adapter *adapter,
|
|
struct sk_buff *skb, struct atl1c_recv_ret_status *prrs)
|
|
{
|
|
/*
|
|
* The pid field in RRS in not correct sometimes, so we
|
|
* cannot figure out if the packet is fragmented or not,
|
|
* so we tell the KERNEL CHECKSUM_NONE
|
|
*/
|
|
skb_checksum_none_assert(skb);
|
|
}
|
|
|
|
static int atl1c_alloc_rx_buffer(struct atl1c_adapter *adapter)
|
|
{
|
|
struct atl1c_rfd_ring *rfd_ring = &adapter->rfd_ring;
|
|
struct pci_dev *pdev = adapter->pdev;
|
|
struct atl1c_buffer *buffer_info, *next_info;
|
|
struct sk_buff *skb;
|
|
void *vir_addr = NULL;
|
|
u16 num_alloc = 0;
|
|
u16 rfd_next_to_use, next_next;
|
|
struct atl1c_rx_free_desc *rfd_desc;
|
|
dma_addr_t mapping;
|
|
|
|
next_next = rfd_next_to_use = rfd_ring->next_to_use;
|
|
if (++next_next == rfd_ring->count)
|
|
next_next = 0;
|
|
buffer_info = &rfd_ring->buffer_info[rfd_next_to_use];
|
|
next_info = &rfd_ring->buffer_info[next_next];
|
|
|
|
while (next_info->flags & ATL1C_BUFFER_FREE) {
|
|
rfd_desc = ATL1C_RFD_DESC(rfd_ring, rfd_next_to_use);
|
|
|
|
skb = netdev_alloc_skb(adapter->netdev, adapter->rx_buffer_len);
|
|
if (unlikely(!skb)) {
|
|
if (netif_msg_rx_err(adapter))
|
|
dev_warn(&pdev->dev, "alloc rx buffer failed\n");
|
|
break;
|
|
}
|
|
|
|
/*
|
|
* Make buffer alignment 2 beyond a 16 byte boundary
|
|
* this will result in a 16 byte aligned IP header after
|
|
* the 14 byte MAC header is removed
|
|
*/
|
|
vir_addr = skb->data;
|
|
ATL1C_SET_BUFFER_STATE(buffer_info, ATL1C_BUFFER_BUSY);
|
|
buffer_info->skb = skb;
|
|
buffer_info->length = adapter->rx_buffer_len;
|
|
mapping = pci_map_single(pdev, vir_addr,
|
|
buffer_info->length,
|
|
PCI_DMA_FROMDEVICE);
|
|
if (unlikely(pci_dma_mapping_error(pdev, mapping))) {
|
|
dev_kfree_skb(skb);
|
|
buffer_info->skb = NULL;
|
|
buffer_info->length = 0;
|
|
ATL1C_SET_BUFFER_STATE(buffer_info, ATL1C_BUFFER_FREE);
|
|
netif_warn(adapter, rx_err, adapter->netdev, "RX pci_map_single failed");
|
|
break;
|
|
}
|
|
buffer_info->dma = mapping;
|
|
ATL1C_SET_PCIMAP_TYPE(buffer_info, ATL1C_PCIMAP_SINGLE,
|
|
ATL1C_PCIMAP_FROMDEVICE);
|
|
rfd_desc->buffer_addr = cpu_to_le64(buffer_info->dma);
|
|
rfd_next_to_use = next_next;
|
|
if (++next_next == rfd_ring->count)
|
|
next_next = 0;
|
|
buffer_info = &rfd_ring->buffer_info[rfd_next_to_use];
|
|
next_info = &rfd_ring->buffer_info[next_next];
|
|
num_alloc++;
|
|
}
|
|
|
|
if (num_alloc) {
|
|
/* TODO: update mailbox here */
|
|
wmb();
|
|
rfd_ring->next_to_use = rfd_next_to_use;
|
|
AT_WRITE_REG(&adapter->hw, REG_MB_RFD0_PROD_IDX,
|
|
rfd_ring->next_to_use & MB_RFDX_PROD_IDX_MASK);
|
|
}
|
|
|
|
return num_alloc;
|
|
}
|
|
|
|
static void atl1c_clean_rrd(struct atl1c_rrd_ring *rrd_ring,
|
|
struct atl1c_recv_ret_status *rrs, u16 num)
|
|
{
|
|
u16 i;
|
|
/* the relationship between rrd and rfd is one map one */
|
|
for (i = 0; i < num; i++, rrs = ATL1C_RRD_DESC(rrd_ring,
|
|
rrd_ring->next_to_clean)) {
|
|
rrs->word3 &= ~RRS_RXD_UPDATED;
|
|
if (++rrd_ring->next_to_clean == rrd_ring->count)
|
|
rrd_ring->next_to_clean = 0;
|
|
}
|
|
}
|
|
|
|
static void atl1c_clean_rfd(struct atl1c_rfd_ring *rfd_ring,
|
|
struct atl1c_recv_ret_status *rrs, u16 num)
|
|
{
|
|
u16 i;
|
|
u16 rfd_index;
|
|
struct atl1c_buffer *buffer_info = rfd_ring->buffer_info;
|
|
|
|
rfd_index = (rrs->word0 >> RRS_RX_RFD_INDEX_SHIFT) &
|
|
RRS_RX_RFD_INDEX_MASK;
|
|
for (i = 0; i < num; i++) {
|
|
buffer_info[rfd_index].skb = NULL;
|
|
ATL1C_SET_BUFFER_STATE(&buffer_info[rfd_index],
|
|
ATL1C_BUFFER_FREE);
|
|
if (++rfd_index == rfd_ring->count)
|
|
rfd_index = 0;
|
|
}
|
|
rfd_ring->next_to_clean = rfd_index;
|
|
}
|
|
|
|
static void atl1c_clean_rx_irq(struct atl1c_adapter *adapter,
|
|
int *work_done, int work_to_do)
|
|
{
|
|
u16 rfd_num, rfd_index;
|
|
u16 count = 0;
|
|
u16 length;
|
|
struct pci_dev *pdev = adapter->pdev;
|
|
struct net_device *netdev = adapter->netdev;
|
|
struct atl1c_rfd_ring *rfd_ring = &adapter->rfd_ring;
|
|
struct atl1c_rrd_ring *rrd_ring = &adapter->rrd_ring;
|
|
struct sk_buff *skb;
|
|
struct atl1c_recv_ret_status *rrs;
|
|
struct atl1c_buffer *buffer_info;
|
|
|
|
while (1) {
|
|
if (*work_done >= work_to_do)
|
|
break;
|
|
rrs = ATL1C_RRD_DESC(rrd_ring, rrd_ring->next_to_clean);
|
|
if (likely(RRS_RXD_IS_VALID(rrs->word3))) {
|
|
rfd_num = (rrs->word0 >> RRS_RX_RFD_CNT_SHIFT) &
|
|
RRS_RX_RFD_CNT_MASK;
|
|
if (unlikely(rfd_num != 1))
|
|
/* TODO support mul rfd*/
|
|
if (netif_msg_rx_err(adapter))
|
|
dev_warn(&pdev->dev,
|
|
"Multi rfd not support yet!\n");
|
|
goto rrs_checked;
|
|
} else {
|
|
break;
|
|
}
|
|
rrs_checked:
|
|
atl1c_clean_rrd(rrd_ring, rrs, rfd_num);
|
|
if (rrs->word3 & (RRS_RX_ERR_SUM | RRS_802_3_LEN_ERR)) {
|
|
atl1c_clean_rfd(rfd_ring, rrs, rfd_num);
|
|
if (netif_msg_rx_err(adapter))
|
|
dev_warn(&pdev->dev,
|
|
"wrong packet! rrs word3 is %x\n",
|
|
rrs->word3);
|
|
continue;
|
|
}
|
|
|
|
length = le16_to_cpu((rrs->word3 >> RRS_PKT_SIZE_SHIFT) &
|
|
RRS_PKT_SIZE_MASK);
|
|
/* Good Receive */
|
|
if (likely(rfd_num == 1)) {
|
|
rfd_index = (rrs->word0 >> RRS_RX_RFD_INDEX_SHIFT) &
|
|
RRS_RX_RFD_INDEX_MASK;
|
|
buffer_info = &rfd_ring->buffer_info[rfd_index];
|
|
pci_unmap_single(pdev, buffer_info->dma,
|
|
buffer_info->length, PCI_DMA_FROMDEVICE);
|
|
skb = buffer_info->skb;
|
|
} else {
|
|
/* TODO */
|
|
if (netif_msg_rx_err(adapter))
|
|
dev_warn(&pdev->dev,
|
|
"Multi rfd not support yet!\n");
|
|
break;
|
|
}
|
|
atl1c_clean_rfd(rfd_ring, rrs, rfd_num);
|
|
skb_put(skb, length - ETH_FCS_LEN);
|
|
skb->protocol = eth_type_trans(skb, netdev);
|
|
atl1c_rx_checksum(adapter, skb, rrs);
|
|
if (rrs->word3 & RRS_VLAN_INS) {
|
|
u16 vlan;
|
|
|
|
AT_TAG_TO_VLAN(rrs->vlan_tag, vlan);
|
|
vlan = le16_to_cpu(vlan);
|
|
__vlan_hwaccel_put_tag(skb, htons(ETH_P_8021Q), vlan);
|
|
}
|
|
netif_receive_skb(skb);
|
|
|
|
(*work_done)++;
|
|
count++;
|
|
}
|
|
if (count)
|
|
atl1c_alloc_rx_buffer(adapter);
|
|
}
|
|
|
|
/**
|
|
* atl1c_clean - NAPI Rx polling callback
|
|
*/
|
|
static int atl1c_clean(struct napi_struct *napi, int budget)
|
|
{
|
|
struct atl1c_adapter *adapter =
|
|
container_of(napi, struct atl1c_adapter, napi);
|
|
int work_done = 0;
|
|
|
|
/* Keep link state information with original netdev */
|
|
if (!netif_carrier_ok(adapter->netdev))
|
|
goto quit_polling;
|
|
/* just enable one RXQ */
|
|
atl1c_clean_rx_irq(adapter, &work_done, budget);
|
|
|
|
if (work_done < budget) {
|
|
quit_polling:
|
|
napi_complete(napi);
|
|
adapter->hw.intr_mask |= ISR_RX_PKT;
|
|
AT_WRITE_REG(&adapter->hw, REG_IMR, adapter->hw.intr_mask);
|
|
}
|
|
return work_done;
|
|
}
|
|
|
|
#ifdef CONFIG_NET_POLL_CONTROLLER
|
|
|
|
/*
|
|
* Polling 'interrupt' - used by things like netconsole to send skbs
|
|
* without having to re-enable interrupts. It's not called while
|
|
* the interrupt routine is executing.
|
|
*/
|
|
static void atl1c_netpoll(struct net_device *netdev)
|
|
{
|
|
struct atl1c_adapter *adapter = netdev_priv(netdev);
|
|
|
|
disable_irq(adapter->pdev->irq);
|
|
atl1c_intr(adapter->pdev->irq, netdev);
|
|
enable_irq(adapter->pdev->irq);
|
|
}
|
|
#endif
|
|
|
|
static inline u16 atl1c_tpd_avail(struct atl1c_adapter *adapter, enum atl1c_trans_queue type)
|
|
{
|
|
struct atl1c_tpd_ring *tpd_ring = &adapter->tpd_ring[type];
|
|
u16 next_to_use = 0;
|
|
u16 next_to_clean = 0;
|
|
|
|
next_to_clean = atomic_read(&tpd_ring->next_to_clean);
|
|
next_to_use = tpd_ring->next_to_use;
|
|
|
|
return (u16)(next_to_clean > next_to_use) ?
|
|
(next_to_clean - next_to_use - 1) :
|
|
(tpd_ring->count + next_to_clean - next_to_use - 1);
|
|
}
|
|
|
|
/*
|
|
* get next usable tpd
|
|
* Note: should call atl1c_tdp_avail to make sure
|
|
* there is enough tpd to use
|
|
*/
|
|
static struct atl1c_tpd_desc *atl1c_get_tpd(struct atl1c_adapter *adapter,
|
|
enum atl1c_trans_queue type)
|
|
{
|
|
struct atl1c_tpd_ring *tpd_ring = &adapter->tpd_ring[type];
|
|
struct atl1c_tpd_desc *tpd_desc;
|
|
u16 next_to_use = 0;
|
|
|
|
next_to_use = tpd_ring->next_to_use;
|
|
if (++tpd_ring->next_to_use == tpd_ring->count)
|
|
tpd_ring->next_to_use = 0;
|
|
tpd_desc = ATL1C_TPD_DESC(tpd_ring, next_to_use);
|
|
memset(tpd_desc, 0, sizeof(struct atl1c_tpd_desc));
|
|
return tpd_desc;
|
|
}
|
|
|
|
static struct atl1c_buffer *
|
|
atl1c_get_tx_buffer(struct atl1c_adapter *adapter, struct atl1c_tpd_desc *tpd)
|
|
{
|
|
struct atl1c_tpd_ring *tpd_ring = adapter->tpd_ring;
|
|
|
|
return &tpd_ring->buffer_info[tpd -
|
|
(struct atl1c_tpd_desc *)tpd_ring->desc];
|
|
}
|
|
|
|
/* Calculate the transmit packet descript needed*/
|
|
static u16 atl1c_cal_tpd_req(const struct sk_buff *skb)
|
|
{
|
|
u16 tpd_req;
|
|
u16 proto_hdr_len = 0;
|
|
|
|
tpd_req = skb_shinfo(skb)->nr_frags + 1;
|
|
|
|
if (skb_is_gso(skb)) {
|
|
proto_hdr_len = skb_transport_offset(skb) + tcp_hdrlen(skb);
|
|
if (proto_hdr_len < skb_headlen(skb))
|
|
tpd_req++;
|
|
if (skb_shinfo(skb)->gso_type & SKB_GSO_TCPV6)
|
|
tpd_req++;
|
|
}
|
|
return tpd_req;
|
|
}
|
|
|
|
static int atl1c_tso_csum(struct atl1c_adapter *adapter,
|
|
struct sk_buff *skb,
|
|
struct atl1c_tpd_desc **tpd,
|
|
enum atl1c_trans_queue type)
|
|
{
|
|
struct pci_dev *pdev = adapter->pdev;
|
|
u8 hdr_len;
|
|
u32 real_len;
|
|
unsigned short offload_type;
|
|
int err;
|
|
|
|
if (skb_is_gso(skb)) {
|
|
if (skb_header_cloned(skb)) {
|
|
err = pskb_expand_head(skb, 0, 0, GFP_ATOMIC);
|
|
if (unlikely(err))
|
|
return -1;
|
|
}
|
|
offload_type = skb_shinfo(skb)->gso_type;
|
|
|
|
if (offload_type & SKB_GSO_TCPV4) {
|
|
real_len = (((unsigned char *)ip_hdr(skb) - skb->data)
|
|
+ ntohs(ip_hdr(skb)->tot_len));
|
|
|
|
if (real_len < skb->len)
|
|
pskb_trim(skb, real_len);
|
|
|
|
hdr_len = (skb_transport_offset(skb) + tcp_hdrlen(skb));
|
|
if (unlikely(skb->len == hdr_len)) {
|
|
/* only xsum need */
|
|
if (netif_msg_tx_queued(adapter))
|
|
dev_warn(&pdev->dev,
|
|
"IPV4 tso with zero data??\n");
|
|
goto check_sum;
|
|
} else {
|
|
ip_hdr(skb)->check = 0;
|
|
tcp_hdr(skb)->check = ~csum_tcpudp_magic(
|
|
ip_hdr(skb)->saddr,
|
|
ip_hdr(skb)->daddr,
|
|
0, IPPROTO_TCP, 0);
|
|
(*tpd)->word1 |= 1 << TPD_IPV4_PACKET_SHIFT;
|
|
}
|
|
}
|
|
|
|
if (offload_type & SKB_GSO_TCPV6) {
|
|
struct atl1c_tpd_ext_desc *etpd =
|
|
*(struct atl1c_tpd_ext_desc **)(tpd);
|
|
|
|
memset(etpd, 0, sizeof(struct atl1c_tpd_ext_desc));
|
|
*tpd = atl1c_get_tpd(adapter, type);
|
|
ipv6_hdr(skb)->payload_len = 0;
|
|
/* check payload == 0 byte ? */
|
|
hdr_len = (skb_transport_offset(skb) + tcp_hdrlen(skb));
|
|
if (unlikely(skb->len == hdr_len)) {
|
|
/* only xsum need */
|
|
if (netif_msg_tx_queued(adapter))
|
|
dev_warn(&pdev->dev,
|
|
"IPV6 tso with zero data??\n");
|
|
goto check_sum;
|
|
} else
|
|
tcp_hdr(skb)->check = ~csum_ipv6_magic(
|
|
&ipv6_hdr(skb)->saddr,
|
|
&ipv6_hdr(skb)->daddr,
|
|
0, IPPROTO_TCP, 0);
|
|
etpd->word1 |= 1 << TPD_LSO_EN_SHIFT;
|
|
etpd->word1 |= 1 << TPD_LSO_VER_SHIFT;
|
|
etpd->pkt_len = cpu_to_le32(skb->len);
|
|
(*tpd)->word1 |= 1 << TPD_LSO_VER_SHIFT;
|
|
}
|
|
|
|
(*tpd)->word1 |= 1 << TPD_LSO_EN_SHIFT;
|
|
(*tpd)->word1 |= (skb_transport_offset(skb) & TPD_TCPHDR_OFFSET_MASK) <<
|
|
TPD_TCPHDR_OFFSET_SHIFT;
|
|
(*tpd)->word1 |= (skb_shinfo(skb)->gso_size & TPD_MSS_MASK) <<
|
|
TPD_MSS_SHIFT;
|
|
return 0;
|
|
}
|
|
|
|
check_sum:
|
|
if (likely(skb->ip_summed == CHECKSUM_PARTIAL)) {
|
|
u8 css, cso;
|
|
cso = skb_checksum_start_offset(skb);
|
|
|
|
if (unlikely(cso & 0x1)) {
|
|
if (netif_msg_tx_err(adapter))
|
|
dev_err(&adapter->pdev->dev,
|
|
"payload offset should not an event number\n");
|
|
return -1;
|
|
} else {
|
|
css = cso + skb->csum_offset;
|
|
|
|
(*tpd)->word1 |= ((cso >> 1) & TPD_PLOADOFFSET_MASK) <<
|
|
TPD_PLOADOFFSET_SHIFT;
|
|
(*tpd)->word1 |= ((css >> 1) & TPD_CCSUM_OFFSET_MASK) <<
|
|
TPD_CCSUM_OFFSET_SHIFT;
|
|
(*tpd)->word1 |= 1 << TPD_CCSUM_EN_SHIFT;
|
|
}
|
|
}
|
|
return 0;
|
|
}
|
|
|
|
static void atl1c_tx_rollback(struct atl1c_adapter *adpt,
|
|
struct atl1c_tpd_desc *first_tpd,
|
|
enum atl1c_trans_queue type)
|
|
{
|
|
struct atl1c_tpd_ring *tpd_ring = &adpt->tpd_ring[type];
|
|
struct atl1c_buffer *buffer_info;
|
|
struct atl1c_tpd_desc *tpd;
|
|
u16 first_index, index;
|
|
|
|
first_index = first_tpd - (struct atl1c_tpd_desc *)tpd_ring->desc;
|
|
index = first_index;
|
|
while (index != tpd_ring->next_to_use) {
|
|
tpd = ATL1C_TPD_DESC(tpd_ring, index);
|
|
buffer_info = &tpd_ring->buffer_info[index];
|
|
atl1c_clean_buffer(adpt->pdev, buffer_info, 0);
|
|
memset(tpd, 0, sizeof(struct atl1c_tpd_desc));
|
|
if (++index == tpd_ring->count)
|
|
index = 0;
|
|
}
|
|
tpd_ring->next_to_use = first_index;
|
|
}
|
|
|
|
static int atl1c_tx_map(struct atl1c_adapter *adapter,
|
|
struct sk_buff *skb, struct atl1c_tpd_desc *tpd,
|
|
enum atl1c_trans_queue type)
|
|
{
|
|
struct atl1c_tpd_desc *use_tpd = NULL;
|
|
struct atl1c_buffer *buffer_info = NULL;
|
|
u16 buf_len = skb_headlen(skb);
|
|
u16 map_len = 0;
|
|
u16 mapped_len = 0;
|
|
u16 hdr_len = 0;
|
|
u16 nr_frags;
|
|
u16 f;
|
|
int tso;
|
|
|
|
nr_frags = skb_shinfo(skb)->nr_frags;
|
|
tso = (tpd->word1 >> TPD_LSO_EN_SHIFT) & TPD_LSO_EN_MASK;
|
|
if (tso) {
|
|
/* TSO */
|
|
map_len = hdr_len = skb_transport_offset(skb) + tcp_hdrlen(skb);
|
|
use_tpd = tpd;
|
|
|
|
buffer_info = atl1c_get_tx_buffer(adapter, use_tpd);
|
|
buffer_info->length = map_len;
|
|
buffer_info->dma = pci_map_single(adapter->pdev,
|
|
skb->data, hdr_len, PCI_DMA_TODEVICE);
|
|
if (unlikely(pci_dma_mapping_error(adapter->pdev,
|
|
buffer_info->dma)))
|
|
goto err_dma;
|
|
ATL1C_SET_BUFFER_STATE(buffer_info, ATL1C_BUFFER_BUSY);
|
|
ATL1C_SET_PCIMAP_TYPE(buffer_info, ATL1C_PCIMAP_SINGLE,
|
|
ATL1C_PCIMAP_TODEVICE);
|
|
mapped_len += map_len;
|
|
use_tpd->buffer_addr = cpu_to_le64(buffer_info->dma);
|
|
use_tpd->buffer_len = cpu_to_le16(buffer_info->length);
|
|
}
|
|
|
|
if (mapped_len < buf_len) {
|
|
/* mapped_len == 0, means we should use the first tpd,
|
|
which is given by caller */
|
|
if (mapped_len == 0)
|
|
use_tpd = tpd;
|
|
else {
|
|
use_tpd = atl1c_get_tpd(adapter, type);
|
|
memcpy(use_tpd, tpd, sizeof(struct atl1c_tpd_desc));
|
|
}
|
|
buffer_info = atl1c_get_tx_buffer(adapter, use_tpd);
|
|
buffer_info->length = buf_len - mapped_len;
|
|
buffer_info->dma =
|
|
pci_map_single(adapter->pdev, skb->data + mapped_len,
|
|
buffer_info->length, PCI_DMA_TODEVICE);
|
|
if (unlikely(pci_dma_mapping_error(adapter->pdev,
|
|
buffer_info->dma)))
|
|
goto err_dma;
|
|
|
|
ATL1C_SET_BUFFER_STATE(buffer_info, ATL1C_BUFFER_BUSY);
|
|
ATL1C_SET_PCIMAP_TYPE(buffer_info, ATL1C_PCIMAP_SINGLE,
|
|
ATL1C_PCIMAP_TODEVICE);
|
|
use_tpd->buffer_addr = cpu_to_le64(buffer_info->dma);
|
|
use_tpd->buffer_len = cpu_to_le16(buffer_info->length);
|
|
}
|
|
|
|
for (f = 0; f < nr_frags; f++) {
|
|
struct skb_frag_struct *frag;
|
|
|
|
frag = &skb_shinfo(skb)->frags[f];
|
|
|
|
use_tpd = atl1c_get_tpd(adapter, type);
|
|
memcpy(use_tpd, tpd, sizeof(struct atl1c_tpd_desc));
|
|
|
|
buffer_info = atl1c_get_tx_buffer(adapter, use_tpd);
|
|
buffer_info->length = skb_frag_size(frag);
|
|
buffer_info->dma = skb_frag_dma_map(&adapter->pdev->dev,
|
|
frag, 0,
|
|
buffer_info->length,
|
|
DMA_TO_DEVICE);
|
|
if (dma_mapping_error(&adapter->pdev->dev, buffer_info->dma))
|
|
goto err_dma;
|
|
|
|
ATL1C_SET_BUFFER_STATE(buffer_info, ATL1C_BUFFER_BUSY);
|
|
ATL1C_SET_PCIMAP_TYPE(buffer_info, ATL1C_PCIMAP_PAGE,
|
|
ATL1C_PCIMAP_TODEVICE);
|
|
use_tpd->buffer_addr = cpu_to_le64(buffer_info->dma);
|
|
use_tpd->buffer_len = cpu_to_le16(buffer_info->length);
|
|
}
|
|
|
|
/* The last tpd */
|
|
use_tpd->word1 |= 1 << TPD_EOP_SHIFT;
|
|
/* The last buffer info contain the skb address,
|
|
so it will be free after unmap */
|
|
buffer_info->skb = skb;
|
|
|
|
return 0;
|
|
|
|
err_dma:
|
|
buffer_info->dma = 0;
|
|
buffer_info->length = 0;
|
|
return -1;
|
|
}
|
|
|
|
static void atl1c_tx_queue(struct atl1c_adapter *adapter, struct sk_buff *skb,
|
|
struct atl1c_tpd_desc *tpd, enum atl1c_trans_queue type)
|
|
{
|
|
struct atl1c_tpd_ring *tpd_ring = &adapter->tpd_ring[type];
|
|
u16 reg;
|
|
|
|
reg = type == atl1c_trans_high ? REG_TPD_PRI1_PIDX : REG_TPD_PRI0_PIDX;
|
|
AT_WRITE_REGW(&adapter->hw, reg, tpd_ring->next_to_use);
|
|
}
|
|
|
|
static netdev_tx_t atl1c_xmit_frame(struct sk_buff *skb,
|
|
struct net_device *netdev)
|
|
{
|
|
struct atl1c_adapter *adapter = netdev_priv(netdev);
|
|
unsigned long flags;
|
|
u16 tpd_req = 1;
|
|
struct atl1c_tpd_desc *tpd;
|
|
enum atl1c_trans_queue type = atl1c_trans_normal;
|
|
|
|
if (test_bit(__AT_DOWN, &adapter->flags)) {
|
|
dev_kfree_skb_any(skb);
|
|
return NETDEV_TX_OK;
|
|
}
|
|
|
|
tpd_req = atl1c_cal_tpd_req(skb);
|
|
if (!spin_trylock_irqsave(&adapter->tx_lock, flags)) {
|
|
if (netif_msg_pktdata(adapter))
|
|
dev_info(&adapter->pdev->dev, "tx locked\n");
|
|
return NETDEV_TX_LOCKED;
|
|
}
|
|
|
|
if (atl1c_tpd_avail(adapter, type) < tpd_req) {
|
|
/* no enough descriptor, just stop queue */
|
|
netif_stop_queue(netdev);
|
|
spin_unlock_irqrestore(&adapter->tx_lock, flags);
|
|
return NETDEV_TX_BUSY;
|
|
}
|
|
|
|
tpd = atl1c_get_tpd(adapter, type);
|
|
|
|
/* do TSO and check sum */
|
|
if (atl1c_tso_csum(adapter, skb, &tpd, type) != 0) {
|
|
spin_unlock_irqrestore(&adapter->tx_lock, flags);
|
|
dev_kfree_skb_any(skb);
|
|
return NETDEV_TX_OK;
|
|
}
|
|
|
|
if (unlikely(vlan_tx_tag_present(skb))) {
|
|
u16 vlan = vlan_tx_tag_get(skb);
|
|
__le16 tag;
|
|
|
|
vlan = cpu_to_le16(vlan);
|
|
AT_VLAN_TO_TAG(vlan, tag);
|
|
tpd->word1 |= 1 << TPD_INS_VTAG_SHIFT;
|
|
tpd->vlan_tag = tag;
|
|
}
|
|
|
|
if (skb_network_offset(skb) != ETH_HLEN)
|
|
tpd->word1 |= 1 << TPD_ETH_TYPE_SHIFT; /* Ethernet frame */
|
|
|
|
if (atl1c_tx_map(adapter, skb, tpd, type) < 0) {
|
|
netif_info(adapter, tx_done, adapter->netdev,
|
|
"tx-skb droppted due to dma error\n");
|
|
/* roll back tpd/buffer */
|
|
atl1c_tx_rollback(adapter, tpd, type);
|
|
spin_unlock_irqrestore(&adapter->tx_lock, flags);
|
|
dev_kfree_skb(skb);
|
|
} else {
|
|
atl1c_tx_queue(adapter, skb, tpd, type);
|
|
spin_unlock_irqrestore(&adapter->tx_lock, flags);
|
|
}
|
|
|
|
return NETDEV_TX_OK;
|
|
}
|
|
|
|
static void atl1c_free_irq(struct atl1c_adapter *adapter)
|
|
{
|
|
struct net_device *netdev = adapter->netdev;
|
|
|
|
free_irq(adapter->pdev->irq, netdev);
|
|
|
|
if (adapter->have_msi)
|
|
pci_disable_msi(adapter->pdev);
|
|
}
|
|
|
|
static int atl1c_request_irq(struct atl1c_adapter *adapter)
|
|
{
|
|
struct pci_dev *pdev = adapter->pdev;
|
|
struct net_device *netdev = adapter->netdev;
|
|
int flags = 0;
|
|
int err = 0;
|
|
|
|
adapter->have_msi = true;
|
|
err = pci_enable_msi(adapter->pdev);
|
|
if (err) {
|
|
if (netif_msg_ifup(adapter))
|
|
dev_err(&pdev->dev,
|
|
"Unable to allocate MSI interrupt Error: %d\n",
|
|
err);
|
|
adapter->have_msi = false;
|
|
}
|
|
|
|
if (!adapter->have_msi)
|
|
flags |= IRQF_SHARED;
|
|
err = request_irq(adapter->pdev->irq, atl1c_intr, flags,
|
|
netdev->name, netdev);
|
|
if (err) {
|
|
if (netif_msg_ifup(adapter))
|
|
dev_err(&pdev->dev,
|
|
"Unable to allocate interrupt Error: %d\n",
|
|
err);
|
|
if (adapter->have_msi)
|
|
pci_disable_msi(adapter->pdev);
|
|
return err;
|
|
}
|
|
if (netif_msg_ifup(adapter))
|
|
dev_dbg(&pdev->dev, "atl1c_request_irq OK\n");
|
|
return err;
|
|
}
|
|
|
|
|
|
static void atl1c_reset_dma_ring(struct atl1c_adapter *adapter)
|
|
{
|
|
/* release tx-pending skbs and reset tx/rx ring index */
|
|
atl1c_clean_tx_ring(adapter, atl1c_trans_normal);
|
|
atl1c_clean_tx_ring(adapter, atl1c_trans_high);
|
|
atl1c_clean_rx_ring(adapter);
|
|
}
|
|
|
|
static int atl1c_up(struct atl1c_adapter *adapter)
|
|
{
|
|
struct net_device *netdev = adapter->netdev;
|
|
int err;
|
|
|
|
netif_carrier_off(netdev);
|
|
|
|
err = atl1c_configure(adapter);
|
|
if (unlikely(err))
|
|
goto err_up;
|
|
|
|
err = atl1c_request_irq(adapter);
|
|
if (unlikely(err))
|
|
goto err_up;
|
|
|
|
atl1c_check_link_status(adapter);
|
|
clear_bit(__AT_DOWN, &adapter->flags);
|
|
napi_enable(&adapter->napi);
|
|
atl1c_irq_enable(adapter);
|
|
netif_start_queue(netdev);
|
|
return err;
|
|
|
|
err_up:
|
|
atl1c_clean_rx_ring(adapter);
|
|
return err;
|
|
}
|
|
|
|
static void atl1c_down(struct atl1c_adapter *adapter)
|
|
{
|
|
struct net_device *netdev = adapter->netdev;
|
|
|
|
atl1c_del_timer(adapter);
|
|
adapter->work_event = 0; /* clear all event */
|
|
/* signal that we're down so the interrupt handler does not
|
|
* reschedule our watchdog timer */
|
|
set_bit(__AT_DOWN, &adapter->flags);
|
|
netif_carrier_off(netdev);
|
|
napi_disable(&adapter->napi);
|
|
atl1c_irq_disable(adapter);
|
|
atl1c_free_irq(adapter);
|
|
/* disable ASPM if device inactive */
|
|
atl1c_disable_l0s_l1(&adapter->hw);
|
|
/* reset MAC to disable all RX/TX */
|
|
atl1c_reset_mac(&adapter->hw);
|
|
msleep(1);
|
|
|
|
adapter->link_speed = SPEED_0;
|
|
adapter->link_duplex = -1;
|
|
atl1c_reset_dma_ring(adapter);
|
|
}
|
|
|
|
/**
|
|
* atl1c_open - Called when a network interface is made active
|
|
* @netdev: network interface device structure
|
|
*
|
|
* Returns 0 on success, negative value on failure
|
|
*
|
|
* The open entry point is called when a network interface is made
|
|
* active by the system (IFF_UP). At this point all resources needed
|
|
* for transmit and receive operations are allocated, the interrupt
|
|
* handler is registered with the OS, the watchdog timer is started,
|
|
* and the stack is notified that the interface is ready.
|
|
*/
|
|
static int atl1c_open(struct net_device *netdev)
|
|
{
|
|
struct atl1c_adapter *adapter = netdev_priv(netdev);
|
|
int err;
|
|
|
|
/* disallow open during test */
|
|
if (test_bit(__AT_TESTING, &adapter->flags))
|
|
return -EBUSY;
|
|
|
|
/* allocate rx/tx dma buffer & descriptors */
|
|
err = atl1c_setup_ring_resources(adapter);
|
|
if (unlikely(err))
|
|
return err;
|
|
|
|
err = atl1c_up(adapter);
|
|
if (unlikely(err))
|
|
goto err_up;
|
|
|
|
return 0;
|
|
|
|
err_up:
|
|
atl1c_free_irq(adapter);
|
|
atl1c_free_ring_resources(adapter);
|
|
atl1c_reset_mac(&adapter->hw);
|
|
return err;
|
|
}
|
|
|
|
/**
|
|
* atl1c_close - Disables a network interface
|
|
* @netdev: network interface device structure
|
|
*
|
|
* Returns 0, this is not allowed to fail
|
|
*
|
|
* The close entry point is called when an interface is de-activated
|
|
* by the OS. The hardware is still under the drivers control, but
|
|
* needs to be disabled. A global MAC reset is issued to stop the
|
|
* hardware, and all transmit and receive resources are freed.
|
|
*/
|
|
static int atl1c_close(struct net_device *netdev)
|
|
{
|
|
struct atl1c_adapter *adapter = netdev_priv(netdev);
|
|
|
|
WARN_ON(test_bit(__AT_RESETTING, &adapter->flags));
|
|
set_bit(__AT_DOWN, &adapter->flags);
|
|
cancel_work_sync(&adapter->common_task);
|
|
atl1c_down(adapter);
|
|
atl1c_free_ring_resources(adapter);
|
|
return 0;
|
|
}
|
|
|
|
static int atl1c_suspend(struct device *dev)
|
|
{
|
|
struct pci_dev *pdev = to_pci_dev(dev);
|
|
struct net_device *netdev = pci_get_drvdata(pdev);
|
|
struct atl1c_adapter *adapter = netdev_priv(netdev);
|
|
struct atl1c_hw *hw = &adapter->hw;
|
|
u32 wufc = adapter->wol;
|
|
|
|
atl1c_disable_l0s_l1(hw);
|
|
if (netif_running(netdev)) {
|
|
WARN_ON(test_bit(__AT_RESETTING, &adapter->flags));
|
|
atl1c_down(adapter);
|
|
}
|
|
netif_device_detach(netdev);
|
|
|
|
if (wufc)
|
|
if (atl1c_phy_to_ps_link(hw) != 0)
|
|
dev_dbg(&pdev->dev, "phy power saving failed");
|
|
|
|
atl1c_power_saving(hw, wufc);
|
|
|
|
return 0;
|
|
}
|
|
|
|
#ifdef CONFIG_PM_SLEEP
|
|
static int atl1c_resume(struct device *dev)
|
|
{
|
|
struct pci_dev *pdev = to_pci_dev(dev);
|
|
struct net_device *netdev = pci_get_drvdata(pdev);
|
|
struct atl1c_adapter *adapter = netdev_priv(netdev);
|
|
|
|
AT_WRITE_REG(&adapter->hw, REG_WOL_CTRL, 0);
|
|
atl1c_reset_pcie(&adapter->hw, ATL1C_PCIE_L0S_L1_DISABLE);
|
|
|
|
atl1c_phy_reset(&adapter->hw);
|
|
atl1c_reset_mac(&adapter->hw);
|
|
atl1c_phy_init(&adapter->hw);
|
|
|
|
#if 0
|
|
AT_READ_REG(&adapter->hw, REG_PM_CTRLSTAT, &pm_data);
|
|
pm_data &= ~PM_CTRLSTAT_PME_EN;
|
|
AT_WRITE_REG(&adapter->hw, REG_PM_CTRLSTAT, pm_data);
|
|
#endif
|
|
|
|
netif_device_attach(netdev);
|
|
if (netif_running(netdev))
|
|
atl1c_up(adapter);
|
|
|
|
return 0;
|
|
}
|
|
#endif
|
|
|
|
static void atl1c_shutdown(struct pci_dev *pdev)
|
|
{
|
|
struct net_device *netdev = pci_get_drvdata(pdev);
|
|
struct atl1c_adapter *adapter = netdev_priv(netdev);
|
|
|
|
atl1c_suspend(&pdev->dev);
|
|
pci_wake_from_d3(pdev, adapter->wol);
|
|
pci_set_power_state(pdev, PCI_D3hot);
|
|
}
|
|
|
|
static const struct net_device_ops atl1c_netdev_ops = {
|
|
.ndo_open = atl1c_open,
|
|
.ndo_stop = atl1c_close,
|
|
.ndo_validate_addr = eth_validate_addr,
|
|
.ndo_start_xmit = atl1c_xmit_frame,
|
|
.ndo_set_mac_address = atl1c_set_mac_addr,
|
|
.ndo_set_rx_mode = atl1c_set_multi,
|
|
.ndo_change_mtu = atl1c_change_mtu,
|
|
.ndo_fix_features = atl1c_fix_features,
|
|
.ndo_set_features = atl1c_set_features,
|
|
.ndo_do_ioctl = atl1c_ioctl,
|
|
.ndo_tx_timeout = atl1c_tx_timeout,
|
|
.ndo_get_stats = atl1c_get_stats,
|
|
#ifdef CONFIG_NET_POLL_CONTROLLER
|
|
.ndo_poll_controller = atl1c_netpoll,
|
|
#endif
|
|
};
|
|
|
|
static int atl1c_init_netdev(struct net_device *netdev, struct pci_dev *pdev)
|
|
{
|
|
SET_NETDEV_DEV(netdev, &pdev->dev);
|
|
pci_set_drvdata(pdev, netdev);
|
|
|
|
netdev->netdev_ops = &atl1c_netdev_ops;
|
|
netdev->watchdog_timeo = AT_TX_WATCHDOG;
|
|
atl1c_set_ethtool_ops(netdev);
|
|
|
|
/* TODO: add when ready */
|
|
netdev->hw_features = NETIF_F_SG |
|
|
NETIF_F_HW_CSUM |
|
|
NETIF_F_HW_VLAN_CTAG_RX |
|
|
NETIF_F_TSO |
|
|
NETIF_F_TSO6;
|
|
netdev->features = netdev->hw_features |
|
|
NETIF_F_HW_VLAN_CTAG_TX;
|
|
return 0;
|
|
}
|
|
|
|
/**
|
|
* atl1c_probe - Device Initialization Routine
|
|
* @pdev: PCI device information struct
|
|
* @ent: entry in atl1c_pci_tbl
|
|
*
|
|
* Returns 0 on success, negative on failure
|
|
*
|
|
* atl1c_probe initializes an adapter identified by a pci_dev structure.
|
|
* The OS initialization, configuring of the adapter private structure,
|
|
* and a hardware reset occur.
|
|
*/
|
|
static int atl1c_probe(struct pci_dev *pdev, const struct pci_device_id *ent)
|
|
{
|
|
struct net_device *netdev;
|
|
struct atl1c_adapter *adapter;
|
|
static int cards_found;
|
|
|
|
int err = 0;
|
|
|
|
/* enable device (incl. PCI PM wakeup and hotplug setup) */
|
|
err = pci_enable_device_mem(pdev);
|
|
if (err) {
|
|
dev_err(&pdev->dev, "cannot enable PCI device\n");
|
|
return err;
|
|
}
|
|
|
|
/*
|
|
* The atl1c chip can DMA to 64-bit addresses, but it uses a single
|
|
* shared register for the high 32 bits, so only a single, aligned,
|
|
* 4 GB physical address range can be used at a time.
|
|
*
|
|
* Supporting 64-bit DMA on this hardware is more trouble than it's
|
|
* worth. It is far easier to limit to 32-bit DMA than update
|
|
* various kernel subsystems to support the mechanics required by a
|
|
* fixed-high-32-bit system.
|
|
*/
|
|
if ((pci_set_dma_mask(pdev, DMA_BIT_MASK(32)) != 0) ||
|
|
(pci_set_consistent_dma_mask(pdev, DMA_BIT_MASK(32)) != 0)) {
|
|
dev_err(&pdev->dev, "No usable DMA configuration,aborting\n");
|
|
goto err_dma;
|
|
}
|
|
|
|
err = pci_request_regions(pdev, atl1c_driver_name);
|
|
if (err) {
|
|
dev_err(&pdev->dev, "cannot obtain PCI resources\n");
|
|
goto err_pci_reg;
|
|
}
|
|
|
|
pci_set_master(pdev);
|
|
|
|
netdev = alloc_etherdev(sizeof(struct atl1c_adapter));
|
|
if (netdev == NULL) {
|
|
err = -ENOMEM;
|
|
goto err_alloc_etherdev;
|
|
}
|
|
|
|
err = atl1c_init_netdev(netdev, pdev);
|
|
if (err) {
|
|
dev_err(&pdev->dev, "init netdevice failed\n");
|
|
goto err_init_netdev;
|
|
}
|
|
adapter = netdev_priv(netdev);
|
|
adapter->bd_number = cards_found;
|
|
adapter->netdev = netdev;
|
|
adapter->pdev = pdev;
|
|
adapter->hw.adapter = adapter;
|
|
adapter->msg_enable = netif_msg_init(-1, atl1c_default_msg);
|
|
adapter->hw.hw_addr = ioremap(pci_resource_start(pdev, 0), pci_resource_len(pdev, 0));
|
|
if (!adapter->hw.hw_addr) {
|
|
err = -EIO;
|
|
dev_err(&pdev->dev, "cannot map device registers\n");
|
|
goto err_ioremap;
|
|
}
|
|
|
|
/* init mii data */
|
|
adapter->mii.dev = netdev;
|
|
adapter->mii.mdio_read = atl1c_mdio_read;
|
|
adapter->mii.mdio_write = atl1c_mdio_write;
|
|
adapter->mii.phy_id_mask = 0x1f;
|
|
adapter->mii.reg_num_mask = MDIO_CTRL_REG_MASK;
|
|
netif_napi_add(netdev, &adapter->napi, atl1c_clean, 64);
|
|
setup_timer(&adapter->phy_config_timer, atl1c_phy_config,
|
|
(unsigned long)adapter);
|
|
/* setup the private structure */
|
|
err = atl1c_sw_init(adapter);
|
|
if (err) {
|
|
dev_err(&pdev->dev, "net device private data init failed\n");
|
|
goto err_sw_init;
|
|
}
|
|
atl1c_reset_pcie(&adapter->hw, ATL1C_PCIE_L0S_L1_DISABLE);
|
|
|
|
/* Init GPHY as early as possible due to power saving issue */
|
|
atl1c_phy_reset(&adapter->hw);
|
|
|
|
err = atl1c_reset_mac(&adapter->hw);
|
|
if (err) {
|
|
err = -EIO;
|
|
goto err_reset;
|
|
}
|
|
|
|
/* reset the controller to
|
|
* put the device in a known good starting state */
|
|
err = atl1c_phy_init(&adapter->hw);
|
|
if (err) {
|
|
err = -EIO;
|
|
goto err_reset;
|
|
}
|
|
if (atl1c_read_mac_addr(&adapter->hw)) {
|
|
/* got a random MAC address, set NET_ADDR_RANDOM to netdev */
|
|
netdev->addr_assign_type = NET_ADDR_RANDOM;
|
|
}
|
|
memcpy(netdev->dev_addr, adapter->hw.mac_addr, netdev->addr_len);
|
|
if (netif_msg_probe(adapter))
|
|
dev_dbg(&pdev->dev, "mac address : %pM\n",
|
|
adapter->hw.mac_addr);
|
|
|
|
atl1c_hw_set_mac_addr(&adapter->hw, adapter->hw.mac_addr);
|
|
INIT_WORK(&adapter->common_task, atl1c_common_task);
|
|
adapter->work_event = 0;
|
|
err = register_netdev(netdev);
|
|
if (err) {
|
|
dev_err(&pdev->dev, "register netdevice failed\n");
|
|
goto err_register;
|
|
}
|
|
|
|
if (netif_msg_probe(adapter))
|
|
dev_info(&pdev->dev, "version %s\n", ATL1C_DRV_VERSION);
|
|
cards_found++;
|
|
return 0;
|
|
|
|
err_reset:
|
|
err_register:
|
|
err_sw_init:
|
|
iounmap(adapter->hw.hw_addr);
|
|
err_init_netdev:
|
|
err_ioremap:
|
|
free_netdev(netdev);
|
|
err_alloc_etherdev:
|
|
pci_release_regions(pdev);
|
|
err_pci_reg:
|
|
err_dma:
|
|
pci_disable_device(pdev);
|
|
return err;
|
|
}
|
|
|
|
/**
|
|
* atl1c_remove - Device Removal Routine
|
|
* @pdev: PCI device information struct
|
|
*
|
|
* atl1c_remove is called by the PCI subsystem to alert the driver
|
|
* that it should release a PCI device. The could be caused by a
|
|
* Hot-Plug event, or because the driver is going to be removed from
|
|
* memory.
|
|
*/
|
|
static void atl1c_remove(struct pci_dev *pdev)
|
|
{
|
|
struct net_device *netdev = pci_get_drvdata(pdev);
|
|
struct atl1c_adapter *adapter = netdev_priv(netdev);
|
|
|
|
unregister_netdev(netdev);
|
|
/* restore permanent address */
|
|
atl1c_hw_set_mac_addr(&adapter->hw, adapter->hw.perm_mac_addr);
|
|
atl1c_phy_disable(&adapter->hw);
|
|
|
|
iounmap(adapter->hw.hw_addr);
|
|
|
|
pci_release_regions(pdev);
|
|
pci_disable_device(pdev);
|
|
free_netdev(netdev);
|
|
}
|
|
|
|
/**
|
|
* atl1c_io_error_detected - called when PCI error is detected
|
|
* @pdev: Pointer to PCI device
|
|
* @state: The current pci connection state
|
|
*
|
|
* This function is called after a PCI bus error affecting
|
|
* this device has been detected.
|
|
*/
|
|
static pci_ers_result_t atl1c_io_error_detected(struct pci_dev *pdev,
|
|
pci_channel_state_t state)
|
|
{
|
|
struct net_device *netdev = pci_get_drvdata(pdev);
|
|
struct atl1c_adapter *adapter = netdev_priv(netdev);
|
|
|
|
netif_device_detach(netdev);
|
|
|
|
if (state == pci_channel_io_perm_failure)
|
|
return PCI_ERS_RESULT_DISCONNECT;
|
|
|
|
if (netif_running(netdev))
|
|
atl1c_down(adapter);
|
|
|
|
pci_disable_device(pdev);
|
|
|
|
/* Request a slot slot reset. */
|
|
return PCI_ERS_RESULT_NEED_RESET;
|
|
}
|
|
|
|
/**
|
|
* atl1c_io_slot_reset - called after the pci bus has been reset.
|
|
* @pdev: Pointer to PCI device
|
|
*
|
|
* Restart the card from scratch, as if from a cold-boot. Implementation
|
|
* resembles the first-half of the e1000_resume routine.
|
|
*/
|
|
static pci_ers_result_t atl1c_io_slot_reset(struct pci_dev *pdev)
|
|
{
|
|
struct net_device *netdev = pci_get_drvdata(pdev);
|
|
struct atl1c_adapter *adapter = netdev_priv(netdev);
|
|
|
|
if (pci_enable_device(pdev)) {
|
|
if (netif_msg_hw(adapter))
|
|
dev_err(&pdev->dev,
|
|
"Cannot re-enable PCI device after reset\n");
|
|
return PCI_ERS_RESULT_DISCONNECT;
|
|
}
|
|
pci_set_master(pdev);
|
|
|
|
pci_enable_wake(pdev, PCI_D3hot, 0);
|
|
pci_enable_wake(pdev, PCI_D3cold, 0);
|
|
|
|
atl1c_reset_mac(&adapter->hw);
|
|
|
|
return PCI_ERS_RESULT_RECOVERED;
|
|
}
|
|
|
|
/**
|
|
* atl1c_io_resume - called when traffic can start flowing again.
|
|
* @pdev: Pointer to PCI device
|
|
*
|
|
* This callback is called when the error recovery driver tells us that
|
|
* its OK to resume normal operation. Implementation resembles the
|
|
* second-half of the atl1c_resume routine.
|
|
*/
|
|
static void atl1c_io_resume(struct pci_dev *pdev)
|
|
{
|
|
struct net_device *netdev = pci_get_drvdata(pdev);
|
|
struct atl1c_adapter *adapter = netdev_priv(netdev);
|
|
|
|
if (netif_running(netdev)) {
|
|
if (atl1c_up(adapter)) {
|
|
if (netif_msg_hw(adapter))
|
|
dev_err(&pdev->dev,
|
|
"Cannot bring device back up after reset\n");
|
|
return;
|
|
}
|
|
}
|
|
|
|
netif_device_attach(netdev);
|
|
}
|
|
|
|
static const struct pci_error_handlers atl1c_err_handler = {
|
|
.error_detected = atl1c_io_error_detected,
|
|
.slot_reset = atl1c_io_slot_reset,
|
|
.resume = atl1c_io_resume,
|
|
};
|
|
|
|
static SIMPLE_DEV_PM_OPS(atl1c_pm_ops, atl1c_suspend, atl1c_resume);
|
|
|
|
static struct pci_driver atl1c_driver = {
|
|
.name = atl1c_driver_name,
|
|
.id_table = atl1c_pci_tbl,
|
|
.probe = atl1c_probe,
|
|
.remove = atl1c_remove,
|
|
.shutdown = atl1c_shutdown,
|
|
.err_handler = &atl1c_err_handler,
|
|
.driver.pm = &atl1c_pm_ops,
|
|
};
|
|
|
|
module_pci_driver(atl1c_driver);
|