435 lines
10 KiB
C
435 lines
10 KiB
C
// SPDX-License-Identifier: GPL-2.0-only
|
|
/*
|
|
* Imagination Technologies Pulse Width Modulator driver
|
|
*
|
|
* Copyright (c) 2014-2015, Imagination Technologies
|
|
*
|
|
* Based on drivers/pwm/pwm-tegra.c, Copyright (c) 2010, NVIDIA Corporation
|
|
*/
|
|
|
|
#include <linux/clk.h>
|
|
#include <linux/err.h>
|
|
#include <linux/io.h>
|
|
#include <linux/mfd/syscon.h>
|
|
#include <linux/module.h>
|
|
#include <linux/of.h>
|
|
#include <linux/of_device.h>
|
|
#include <linux/platform_device.h>
|
|
#include <linux/pm_runtime.h>
|
|
#include <linux/pwm.h>
|
|
#include <linux/regmap.h>
|
|
#include <linux/slab.h>
|
|
|
|
/* PWM registers */
|
|
#define PWM_CTRL_CFG 0x0000
|
|
#define PWM_CTRL_CFG_NO_SUB_DIV 0
|
|
#define PWM_CTRL_CFG_SUB_DIV0 1
|
|
#define PWM_CTRL_CFG_SUB_DIV1 2
|
|
#define PWM_CTRL_CFG_SUB_DIV0_DIV1 3
|
|
#define PWM_CTRL_CFG_DIV_SHIFT(ch) ((ch) * 2 + 4)
|
|
#define PWM_CTRL_CFG_DIV_MASK 0x3
|
|
|
|
#define PWM_CH_CFG(ch) (0x4 + (ch) * 4)
|
|
#define PWM_CH_CFG_TMBASE_SHIFT 0
|
|
#define PWM_CH_CFG_DUTY_SHIFT 16
|
|
|
|
#define PERIP_PWM_PDM_CONTROL 0x0140
|
|
#define PERIP_PWM_PDM_CONTROL_CH_MASK 0x1
|
|
#define PERIP_PWM_PDM_CONTROL_CH_SHIFT(ch) ((ch) * 4)
|
|
|
|
#define IMG_PWM_PM_TIMEOUT 1000 /* ms */
|
|
|
|
/*
|
|
* PWM period is specified with a timebase register,
|
|
* in number of step periods. The PWM duty cycle is also
|
|
* specified in step periods, in the [0, $timebase] range.
|
|
* In other words, the timebase imposes the duty cycle
|
|
* resolution. Therefore, let's constraint the timebase to
|
|
* a minimum value to allow a sane range of duty cycle values.
|
|
* Imposing a minimum timebase, will impose a maximum PWM frequency.
|
|
*
|
|
* The value chosen is completely arbitrary.
|
|
*/
|
|
#define MIN_TMBASE_STEPS 16
|
|
|
|
#define IMG_PWM_NPWM 4
|
|
|
|
struct img_pwm_soc_data {
|
|
u32 max_timebase;
|
|
};
|
|
|
|
struct img_pwm_chip {
|
|
struct device *dev;
|
|
struct pwm_chip chip;
|
|
struct clk *pwm_clk;
|
|
struct clk *sys_clk;
|
|
void __iomem *base;
|
|
struct regmap *periph_regs;
|
|
int max_period_ns;
|
|
int min_period_ns;
|
|
const struct img_pwm_soc_data *data;
|
|
u32 suspend_ctrl_cfg;
|
|
u32 suspend_ch_cfg[IMG_PWM_NPWM];
|
|
};
|
|
|
|
static inline struct img_pwm_chip *to_img_pwm_chip(struct pwm_chip *chip)
|
|
{
|
|
return container_of(chip, struct img_pwm_chip, chip);
|
|
}
|
|
|
|
static inline void img_pwm_writel(struct img_pwm_chip *chip,
|
|
u32 reg, u32 val)
|
|
{
|
|
writel(val, chip->base + reg);
|
|
}
|
|
|
|
static inline u32 img_pwm_readl(struct img_pwm_chip *chip,
|
|
u32 reg)
|
|
{
|
|
return readl(chip->base + reg);
|
|
}
|
|
|
|
static int img_pwm_config(struct pwm_chip *chip, struct pwm_device *pwm,
|
|
int duty_ns, int period_ns)
|
|
{
|
|
u32 val, div, duty, timebase;
|
|
unsigned long mul, output_clk_hz, input_clk_hz;
|
|
struct img_pwm_chip *pwm_chip = to_img_pwm_chip(chip);
|
|
unsigned int max_timebase = pwm_chip->data->max_timebase;
|
|
int ret;
|
|
|
|
if (period_ns < pwm_chip->min_period_ns ||
|
|
period_ns > pwm_chip->max_period_ns) {
|
|
dev_err(chip->dev, "configured period not in range\n");
|
|
return -ERANGE;
|
|
}
|
|
|
|
input_clk_hz = clk_get_rate(pwm_chip->pwm_clk);
|
|
output_clk_hz = DIV_ROUND_UP(NSEC_PER_SEC, period_ns);
|
|
|
|
mul = DIV_ROUND_UP(input_clk_hz, output_clk_hz);
|
|
if (mul <= max_timebase) {
|
|
div = PWM_CTRL_CFG_NO_SUB_DIV;
|
|
timebase = DIV_ROUND_UP(mul, 1);
|
|
} else if (mul <= max_timebase * 8) {
|
|
div = PWM_CTRL_CFG_SUB_DIV0;
|
|
timebase = DIV_ROUND_UP(mul, 8);
|
|
} else if (mul <= max_timebase * 64) {
|
|
div = PWM_CTRL_CFG_SUB_DIV1;
|
|
timebase = DIV_ROUND_UP(mul, 64);
|
|
} else if (mul <= max_timebase * 512) {
|
|
div = PWM_CTRL_CFG_SUB_DIV0_DIV1;
|
|
timebase = DIV_ROUND_UP(mul, 512);
|
|
} else {
|
|
dev_err(chip->dev,
|
|
"failed to configure timebase steps/divider value\n");
|
|
return -EINVAL;
|
|
}
|
|
|
|
duty = DIV_ROUND_UP(timebase * duty_ns, period_ns);
|
|
|
|
ret = pm_runtime_resume_and_get(chip->dev);
|
|
if (ret < 0)
|
|
return ret;
|
|
|
|
val = img_pwm_readl(pwm_chip, PWM_CTRL_CFG);
|
|
val &= ~(PWM_CTRL_CFG_DIV_MASK << PWM_CTRL_CFG_DIV_SHIFT(pwm->hwpwm));
|
|
val |= (div & PWM_CTRL_CFG_DIV_MASK) <<
|
|
PWM_CTRL_CFG_DIV_SHIFT(pwm->hwpwm);
|
|
img_pwm_writel(pwm_chip, PWM_CTRL_CFG, val);
|
|
|
|
val = (duty << PWM_CH_CFG_DUTY_SHIFT) |
|
|
(timebase << PWM_CH_CFG_TMBASE_SHIFT);
|
|
img_pwm_writel(pwm_chip, PWM_CH_CFG(pwm->hwpwm), val);
|
|
|
|
pm_runtime_mark_last_busy(chip->dev);
|
|
pm_runtime_put_autosuspend(chip->dev);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int img_pwm_enable(struct pwm_chip *chip, struct pwm_device *pwm)
|
|
{
|
|
u32 val;
|
|
struct img_pwm_chip *pwm_chip = to_img_pwm_chip(chip);
|
|
int ret;
|
|
|
|
ret = pm_runtime_resume_and_get(chip->dev);
|
|
if (ret < 0)
|
|
return ret;
|
|
|
|
val = img_pwm_readl(pwm_chip, PWM_CTRL_CFG);
|
|
val |= BIT(pwm->hwpwm);
|
|
img_pwm_writel(pwm_chip, PWM_CTRL_CFG, val);
|
|
|
|
regmap_update_bits(pwm_chip->periph_regs, PERIP_PWM_PDM_CONTROL,
|
|
PERIP_PWM_PDM_CONTROL_CH_MASK <<
|
|
PERIP_PWM_PDM_CONTROL_CH_SHIFT(pwm->hwpwm), 0);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static void img_pwm_disable(struct pwm_chip *chip, struct pwm_device *pwm)
|
|
{
|
|
u32 val;
|
|
struct img_pwm_chip *pwm_chip = to_img_pwm_chip(chip);
|
|
|
|
val = img_pwm_readl(pwm_chip, PWM_CTRL_CFG);
|
|
val &= ~BIT(pwm->hwpwm);
|
|
img_pwm_writel(pwm_chip, PWM_CTRL_CFG, val);
|
|
|
|
pm_runtime_mark_last_busy(chip->dev);
|
|
pm_runtime_put_autosuspend(chip->dev);
|
|
}
|
|
|
|
static int img_pwm_apply(struct pwm_chip *chip, struct pwm_device *pwm,
|
|
const struct pwm_state *state)
|
|
{
|
|
int err;
|
|
|
|
if (state->polarity != PWM_POLARITY_NORMAL)
|
|
return -EINVAL;
|
|
|
|
if (!state->enabled) {
|
|
if (pwm->state.enabled)
|
|
img_pwm_disable(chip, pwm);
|
|
|
|
return 0;
|
|
}
|
|
|
|
err = img_pwm_config(pwm->chip, pwm, state->duty_cycle, state->period);
|
|
if (err)
|
|
return err;
|
|
|
|
if (!pwm->state.enabled)
|
|
err = img_pwm_enable(chip, pwm);
|
|
|
|
return err;
|
|
}
|
|
|
|
static const struct pwm_ops img_pwm_ops = {
|
|
.apply = img_pwm_apply,
|
|
.owner = THIS_MODULE,
|
|
};
|
|
|
|
static const struct img_pwm_soc_data pistachio_pwm = {
|
|
.max_timebase = 255,
|
|
};
|
|
|
|
static const struct of_device_id img_pwm_of_match[] = {
|
|
{
|
|
.compatible = "img,pistachio-pwm",
|
|
.data = &pistachio_pwm,
|
|
},
|
|
{ }
|
|
};
|
|
MODULE_DEVICE_TABLE(of, img_pwm_of_match);
|
|
|
|
static int img_pwm_runtime_suspend(struct device *dev)
|
|
{
|
|
struct img_pwm_chip *pwm_chip = dev_get_drvdata(dev);
|
|
|
|
clk_disable_unprepare(pwm_chip->pwm_clk);
|
|
clk_disable_unprepare(pwm_chip->sys_clk);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int img_pwm_runtime_resume(struct device *dev)
|
|
{
|
|
struct img_pwm_chip *pwm_chip = dev_get_drvdata(dev);
|
|
int ret;
|
|
|
|
ret = clk_prepare_enable(pwm_chip->sys_clk);
|
|
if (ret < 0) {
|
|
dev_err(dev, "could not prepare or enable sys clock\n");
|
|
return ret;
|
|
}
|
|
|
|
ret = clk_prepare_enable(pwm_chip->pwm_clk);
|
|
if (ret < 0) {
|
|
dev_err(dev, "could not prepare or enable pwm clock\n");
|
|
clk_disable_unprepare(pwm_chip->sys_clk);
|
|
return ret;
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int img_pwm_probe(struct platform_device *pdev)
|
|
{
|
|
int ret;
|
|
u64 val;
|
|
unsigned long clk_rate;
|
|
struct img_pwm_chip *pwm;
|
|
const struct of_device_id *of_dev_id;
|
|
|
|
pwm = devm_kzalloc(&pdev->dev, sizeof(*pwm), GFP_KERNEL);
|
|
if (!pwm)
|
|
return -ENOMEM;
|
|
|
|
pwm->dev = &pdev->dev;
|
|
|
|
pwm->base = devm_platform_ioremap_resource(pdev, 0);
|
|
if (IS_ERR(pwm->base))
|
|
return PTR_ERR(pwm->base);
|
|
|
|
of_dev_id = of_match_device(img_pwm_of_match, &pdev->dev);
|
|
if (!of_dev_id)
|
|
return -ENODEV;
|
|
pwm->data = of_dev_id->data;
|
|
|
|
pwm->periph_regs = syscon_regmap_lookup_by_phandle(pdev->dev.of_node,
|
|
"img,cr-periph");
|
|
if (IS_ERR(pwm->periph_regs))
|
|
return PTR_ERR(pwm->periph_regs);
|
|
|
|
pwm->sys_clk = devm_clk_get(&pdev->dev, "sys");
|
|
if (IS_ERR(pwm->sys_clk)) {
|
|
dev_err(&pdev->dev, "failed to get system clock\n");
|
|
return PTR_ERR(pwm->sys_clk);
|
|
}
|
|
|
|
pwm->pwm_clk = devm_clk_get(&pdev->dev, "pwm");
|
|
if (IS_ERR(pwm->pwm_clk)) {
|
|
dev_err(&pdev->dev, "failed to get pwm clock\n");
|
|
return PTR_ERR(pwm->pwm_clk);
|
|
}
|
|
|
|
platform_set_drvdata(pdev, pwm);
|
|
|
|
pm_runtime_set_autosuspend_delay(&pdev->dev, IMG_PWM_PM_TIMEOUT);
|
|
pm_runtime_use_autosuspend(&pdev->dev);
|
|
pm_runtime_enable(&pdev->dev);
|
|
if (!pm_runtime_enabled(&pdev->dev)) {
|
|
ret = img_pwm_runtime_resume(&pdev->dev);
|
|
if (ret)
|
|
goto err_pm_disable;
|
|
}
|
|
|
|
clk_rate = clk_get_rate(pwm->pwm_clk);
|
|
if (!clk_rate) {
|
|
dev_err(&pdev->dev, "pwm clock has no frequency\n");
|
|
ret = -EINVAL;
|
|
goto err_suspend;
|
|
}
|
|
|
|
/* The maximum input clock divider is 512 */
|
|
val = (u64)NSEC_PER_SEC * 512 * pwm->data->max_timebase;
|
|
do_div(val, clk_rate);
|
|
pwm->max_period_ns = val;
|
|
|
|
val = (u64)NSEC_PER_SEC * MIN_TMBASE_STEPS;
|
|
do_div(val, clk_rate);
|
|
pwm->min_period_ns = val;
|
|
|
|
pwm->chip.dev = &pdev->dev;
|
|
pwm->chip.ops = &img_pwm_ops;
|
|
pwm->chip.npwm = IMG_PWM_NPWM;
|
|
|
|
ret = pwmchip_add(&pwm->chip);
|
|
if (ret < 0) {
|
|
dev_err(&pdev->dev, "pwmchip_add failed: %d\n", ret);
|
|
goto err_suspend;
|
|
}
|
|
|
|
return 0;
|
|
|
|
err_suspend:
|
|
if (!pm_runtime_enabled(&pdev->dev))
|
|
img_pwm_runtime_suspend(&pdev->dev);
|
|
err_pm_disable:
|
|
pm_runtime_disable(&pdev->dev);
|
|
pm_runtime_dont_use_autosuspend(&pdev->dev);
|
|
return ret;
|
|
}
|
|
|
|
static int img_pwm_remove(struct platform_device *pdev)
|
|
{
|
|
struct img_pwm_chip *pwm_chip = platform_get_drvdata(pdev);
|
|
|
|
pm_runtime_disable(&pdev->dev);
|
|
if (!pm_runtime_status_suspended(&pdev->dev))
|
|
img_pwm_runtime_suspend(&pdev->dev);
|
|
|
|
pwmchip_remove(&pwm_chip->chip);
|
|
|
|
return 0;
|
|
}
|
|
|
|
#ifdef CONFIG_PM_SLEEP
|
|
static int img_pwm_suspend(struct device *dev)
|
|
{
|
|
struct img_pwm_chip *pwm_chip = dev_get_drvdata(dev);
|
|
int i, ret;
|
|
|
|
if (pm_runtime_status_suspended(dev)) {
|
|
ret = img_pwm_runtime_resume(dev);
|
|
if (ret)
|
|
return ret;
|
|
}
|
|
|
|
for (i = 0; i < pwm_chip->chip.npwm; i++)
|
|
pwm_chip->suspend_ch_cfg[i] = img_pwm_readl(pwm_chip,
|
|
PWM_CH_CFG(i));
|
|
|
|
pwm_chip->suspend_ctrl_cfg = img_pwm_readl(pwm_chip, PWM_CTRL_CFG);
|
|
|
|
img_pwm_runtime_suspend(dev);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int img_pwm_resume(struct device *dev)
|
|
{
|
|
struct img_pwm_chip *pwm_chip = dev_get_drvdata(dev);
|
|
int ret;
|
|
int i;
|
|
|
|
ret = img_pwm_runtime_resume(dev);
|
|
if (ret)
|
|
return ret;
|
|
|
|
for (i = 0; i < pwm_chip->chip.npwm; i++)
|
|
img_pwm_writel(pwm_chip, PWM_CH_CFG(i),
|
|
pwm_chip->suspend_ch_cfg[i]);
|
|
|
|
img_pwm_writel(pwm_chip, PWM_CTRL_CFG, pwm_chip->suspend_ctrl_cfg);
|
|
|
|
for (i = 0; i < pwm_chip->chip.npwm; i++)
|
|
if (pwm_chip->suspend_ctrl_cfg & BIT(i))
|
|
regmap_update_bits(pwm_chip->periph_regs,
|
|
PERIP_PWM_PDM_CONTROL,
|
|
PERIP_PWM_PDM_CONTROL_CH_MASK <<
|
|
PERIP_PWM_PDM_CONTROL_CH_SHIFT(i),
|
|
0);
|
|
|
|
if (pm_runtime_status_suspended(dev))
|
|
img_pwm_runtime_suspend(dev);
|
|
|
|
return 0;
|
|
}
|
|
#endif /* CONFIG_PM */
|
|
|
|
static const struct dev_pm_ops img_pwm_pm_ops = {
|
|
SET_RUNTIME_PM_OPS(img_pwm_runtime_suspend,
|
|
img_pwm_runtime_resume,
|
|
NULL)
|
|
SET_SYSTEM_SLEEP_PM_OPS(img_pwm_suspend, img_pwm_resume)
|
|
};
|
|
|
|
static struct platform_driver img_pwm_driver = {
|
|
.driver = {
|
|
.name = "img-pwm",
|
|
.pm = &img_pwm_pm_ops,
|
|
.of_match_table = img_pwm_of_match,
|
|
},
|
|
.probe = img_pwm_probe,
|
|
.remove = img_pwm_remove,
|
|
};
|
|
module_platform_driver(img_pwm_driver);
|
|
|
|
MODULE_AUTHOR("Sai Masarapu <Sai.Masarapu@imgtec.com>");
|
|
MODULE_DESCRIPTION("Imagination Technologies PWM DAC driver");
|
|
MODULE_LICENSE("GPL v2");
|