OpenCloudOS-Kernel/drivers/iio/gyro/itg3200_core.c

392 lines
8.7 KiB
C

/*
* itg3200_core.c -- support InvenSense ITG3200
* Digital 3-Axis Gyroscope driver
*
* Copyright (c) 2011 Christian Strobel <christian.strobel@iis.fraunhofer.de>
* Copyright (c) 2011 Manuel Stahl <manuel.stahl@iis.fraunhofer.de>
* Copyright (c) 2012 Thorsten Nowak <thorsten.nowak@iis.fraunhofer.de>
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 as
* published by the Free Software Foundation.
*
* TODO:
* - Support digital low pass filter
* - Support power management
*/
#include <linux/interrupt.h>
#include <linux/irq.h>
#include <linux/i2c.h>
#include <linux/gpio.h>
#include <linux/slab.h>
#include <linux/stat.h>
#include <linux/module.h>
#include <linux/delay.h>
#include <linux/iio/iio.h>
#include <linux/iio/sysfs.h>
#include <linux/iio/events.h>
#include <linux/iio/buffer.h>
#include <linux/iio/gyro/itg3200.h>
int itg3200_write_reg_8(struct iio_dev *indio_dev,
u8 reg_address, u8 val)
{
struct itg3200 *st = iio_priv(indio_dev);
return i2c_smbus_write_byte_data(st->i2c, 0x80 | reg_address, val);
}
int itg3200_read_reg_8(struct iio_dev *indio_dev,
u8 reg_address, u8 *val)
{
struct itg3200 *st = iio_priv(indio_dev);
int ret;
ret = i2c_smbus_read_byte_data(st->i2c, reg_address);
if (ret < 0)
return ret;
*val = ret;
return 0;
}
static int itg3200_read_reg_s16(struct iio_dev *indio_dev, u8 lower_reg_address,
int *val)
{
struct itg3200 *st = iio_priv(indio_dev);
struct i2c_client *client = st->i2c;
int ret;
s16 out;
struct i2c_msg msg[2] = {
{
.addr = client->addr,
.flags = client->flags,
.len = 1,
.buf = (char *)&lower_reg_address,
},
{
.addr = client->addr,
.flags = client->flags | I2C_M_RD,
.len = 2,
.buf = (char *)&out,
},
};
lower_reg_address |= 0x80;
ret = i2c_transfer(client->adapter, msg, 2);
be16_to_cpus(&out);
*val = out;
return (ret == 2) ? 0 : ret;
}
static int itg3200_read_raw(struct iio_dev *indio_dev,
const struct iio_chan_spec *chan,
int *val, int *val2, long info)
{
int ret = 0;
u8 reg;
switch (info) {
case IIO_CHAN_INFO_RAW:
reg = (u8)chan->address;
ret = itg3200_read_reg_s16(indio_dev, reg, val);
return IIO_VAL_INT;
case IIO_CHAN_INFO_SCALE:
*val = 0;
if (chan->type == IIO_TEMP)
*val2 = 1000000000/280;
else
*val2 = 1214142; /* (1 / 14,375) * (PI / 180) */
return IIO_VAL_INT_PLUS_NANO;
case IIO_CHAN_INFO_OFFSET:
/* Only the temperature channel has an offset */
*val = 23000;
return IIO_VAL_INT;
default:
return -EINVAL;
}
return ret;
}
static ssize_t itg3200_read_frequency(struct device *dev,
struct device_attribute *attr, char *buf)
{
struct iio_dev *indio_dev = dev_to_iio_dev(dev);
int ret, sps;
u8 val;
ret = itg3200_read_reg_8(indio_dev, ITG3200_REG_DLPF, &val);
if (ret)
return ret;
sps = (val & ITG3200_DLPF_CFG_MASK) ? 1000 : 8000;
ret = itg3200_read_reg_8(indio_dev, ITG3200_REG_SAMPLE_RATE_DIV, &val);
if (ret)
return ret;
sps /= val + 1;
return sprintf(buf, "%d\n", sps);
}
static ssize_t itg3200_write_frequency(struct device *dev,
struct device_attribute *attr,
const char *buf,
size_t len)
{
struct iio_dev *indio_dev = dev_to_iio_dev(dev);
unsigned val;
int ret;
u8 t;
ret = kstrtouint(buf, 10, &val);
if (ret)
return ret;
mutex_lock(&indio_dev->mlock);
ret = itg3200_read_reg_8(indio_dev, ITG3200_REG_DLPF, &t);
if (ret)
goto err_ret;
if (val == 0) {
ret = -EINVAL;
goto err_ret;
}
t = ((t & ITG3200_DLPF_CFG_MASK) ? 1000u : 8000u) / val - 1;
ret = itg3200_write_reg_8(indio_dev, ITG3200_REG_SAMPLE_RATE_DIV, t);
err_ret:
mutex_unlock(&indio_dev->mlock);
return ret ? ret : len;
}
/*
* Reset device and internal registers to the power-up-default settings
* Use the gyro clock as reference, as suggested by the datasheet
*/
static int itg3200_reset(struct iio_dev *indio_dev)
{
struct itg3200 *st = iio_priv(indio_dev);
int ret;
dev_dbg(&st->i2c->dev, "reset device");
ret = itg3200_write_reg_8(indio_dev,
ITG3200_REG_POWER_MANAGEMENT,
ITG3200_RESET);
if (ret) {
dev_err(&st->i2c->dev, "error resetting device");
goto error_ret;
}
/* Wait for PLL (1ms according to datasheet) */
udelay(1500);
ret = itg3200_write_reg_8(indio_dev,
ITG3200_REG_IRQ_CONFIG,
ITG3200_IRQ_ACTIVE_HIGH |
ITG3200_IRQ_PUSH_PULL |
ITG3200_IRQ_LATCH_50US_PULSE |
ITG3200_IRQ_LATCH_CLEAR_ANY);
if (ret)
dev_err(&st->i2c->dev, "error init device");
error_ret:
return ret;
}
/* itg3200_enable_full_scale() - Disables the digital low pass filter */
static int itg3200_enable_full_scale(struct iio_dev *indio_dev)
{
u8 val;
int ret;
ret = itg3200_read_reg_8(indio_dev, ITG3200_REG_DLPF, &val);
if (ret)
goto err_ret;
val |= ITG3200_DLPF_FS_SEL_2000;
return itg3200_write_reg_8(indio_dev, ITG3200_REG_DLPF, val);
err_ret:
return ret;
}
static int itg3200_initial_setup(struct iio_dev *indio_dev)
{
struct itg3200 *st = iio_priv(indio_dev);
int ret;
u8 val;
ret = itg3200_read_reg_8(indio_dev, ITG3200_REG_ADDRESS, &val);
if (ret)
goto err_ret;
if (((val >> 1) & 0x3f) != 0x34) {
dev_err(&st->i2c->dev, "invalid reg value 0x%02x", val);
ret = -ENXIO;
goto err_ret;
}
ret = itg3200_reset(indio_dev);
if (ret)
goto err_ret;
ret = itg3200_enable_full_scale(indio_dev);
err_ret:
return ret;
}
#define ITG3200_ST \
{ .sign = 's', .realbits = 16, .storagebits = 16, .endianness = IIO_BE }
#define ITG3200_GYRO_CHAN(_mod) { \
.type = IIO_ANGL_VEL, \
.modified = 1, \
.channel2 = IIO_MOD_ ## _mod, \
.info_mask_separate = BIT(IIO_CHAN_INFO_RAW), \
.info_mask_shared_by_type = BIT(IIO_CHAN_INFO_SCALE), \
.address = ITG3200_REG_GYRO_ ## _mod ## OUT_H, \
.scan_index = ITG3200_SCAN_GYRO_ ## _mod, \
.scan_type = ITG3200_ST, \
}
static const struct iio_chan_spec itg3200_channels[] = {
{
.type = IIO_TEMP,
.channel2 = IIO_NO_MOD,
.info_mask_separate = BIT(IIO_CHAN_INFO_RAW),
.info_mask_shared_by_type = BIT(IIO_CHAN_INFO_OFFSET) |
BIT(IIO_CHAN_INFO_SCALE),
.address = ITG3200_REG_TEMP_OUT_H,
.scan_index = ITG3200_SCAN_TEMP,
.scan_type = ITG3200_ST,
},
ITG3200_GYRO_CHAN(X),
ITG3200_GYRO_CHAN(Y),
ITG3200_GYRO_CHAN(Z),
IIO_CHAN_SOFT_TIMESTAMP(ITG3200_SCAN_ELEMENTS),
};
/* IIO device attributes */
static IIO_DEV_ATTR_SAMP_FREQ(S_IWUSR | S_IRUGO, itg3200_read_frequency,
itg3200_write_frequency);
static struct attribute *itg3200_attributes[] = {
&iio_dev_attr_sampling_frequency.dev_attr.attr,
NULL
};
static const struct attribute_group itg3200_attribute_group = {
.attrs = itg3200_attributes,
};
static const struct iio_info itg3200_info = {
.attrs = &itg3200_attribute_group,
.read_raw = &itg3200_read_raw,
.driver_module = THIS_MODULE,
};
static const unsigned long itg3200_available_scan_masks[] = { 0xffffffff, 0x0 };
static int itg3200_probe(struct i2c_client *client,
const struct i2c_device_id *id)
{
int ret;
struct itg3200 *st;
struct iio_dev *indio_dev;
dev_dbg(&client->dev, "probe I2C dev with IRQ %i", client->irq);
indio_dev = devm_iio_device_alloc(&client->dev, sizeof(*st));
if (!indio_dev)
return -ENOMEM;
st = iio_priv(indio_dev);
i2c_set_clientdata(client, indio_dev);
st->i2c = client;
indio_dev->dev.parent = &client->dev;
indio_dev->name = client->dev.driver->name;
indio_dev->channels = itg3200_channels;
indio_dev->num_channels = ARRAY_SIZE(itg3200_channels);
indio_dev->available_scan_masks = itg3200_available_scan_masks;
indio_dev->info = &itg3200_info;
indio_dev->modes = INDIO_DIRECT_MODE;
ret = itg3200_buffer_configure(indio_dev);
if (ret)
return ret;
if (client->irq) {
ret = itg3200_probe_trigger(indio_dev);
if (ret)
goto error_unconfigure_buffer;
}
ret = itg3200_initial_setup(indio_dev);
if (ret)
goto error_remove_trigger;
ret = iio_device_register(indio_dev);
if (ret)
goto error_remove_trigger;
return 0;
error_remove_trigger:
if (client->irq)
itg3200_remove_trigger(indio_dev);
error_unconfigure_buffer:
itg3200_buffer_unconfigure(indio_dev);
return ret;
}
static int itg3200_remove(struct i2c_client *client)
{
struct iio_dev *indio_dev = i2c_get_clientdata(client);
iio_device_unregister(indio_dev);
if (client->irq)
itg3200_remove_trigger(indio_dev);
itg3200_buffer_unconfigure(indio_dev);
return 0;
}
static const struct i2c_device_id itg3200_id[] = {
{ "itg3200", 0 },
{ }
};
MODULE_DEVICE_TABLE(i2c, itg3200_id);
static struct i2c_driver itg3200_driver = {
.driver = {
.owner = THIS_MODULE,
.name = "itg3200",
},
.id_table = itg3200_id,
.probe = itg3200_probe,
.remove = itg3200_remove,
};
module_i2c_driver(itg3200_driver);
MODULE_AUTHOR("Christian Strobel <christian.strobel@iis.fraunhofer.de>");
MODULE_DESCRIPTION("ITG3200 Gyroscope I2C driver");
MODULE_LICENSE("GPL v2");