210 lines
5.7 KiB
YAML
210 lines
5.7 KiB
YAML
# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
|
|
# Copyright (c) 2020 MediaTek
|
|
%YAML 1.2
|
|
---
|
|
$id: http://devicetree.org/schemas/usb/mediatek,mtk-xhci.yaml#
|
|
$schema: http://devicetree.org/meta-schemas/core.yaml#
|
|
|
|
title: MediaTek USB3 xHCI Device Tree Bindings
|
|
|
|
maintainers:
|
|
- Chunfeng Yun <chunfeng.yun@mediatek.com>
|
|
|
|
allOf:
|
|
- $ref: "usb-xhci.yaml"
|
|
|
|
description: |
|
|
There are two scenarios:
|
|
case 1: only supports xHCI driver;
|
|
case 2: supports dual-role mode, and the host is based on xHCI driver.
|
|
|
|
properties:
|
|
# common properties for both case 1 and case 2
|
|
compatible:
|
|
items:
|
|
- enum:
|
|
- mediatek,mt2701-xhci
|
|
- mediatek,mt2712-xhci
|
|
- mediatek,mt7622-xhci
|
|
- mediatek,mt7623-xhci
|
|
- mediatek,mt7629-xhci
|
|
- mediatek,mt8173-xhci
|
|
- mediatek,mt8183-xhci
|
|
- mediatek,mt8192-xhci
|
|
- mediatek,mt8195-xhci
|
|
- const: mediatek,mtk-xhci
|
|
|
|
reg:
|
|
minItems: 1
|
|
items:
|
|
- description: the registers of xHCI MAC
|
|
- description: the registers of IP Port Control
|
|
|
|
reg-names:
|
|
minItems: 1
|
|
items:
|
|
- const: mac
|
|
- const: ippc # optional, only needed for case 1.
|
|
|
|
interrupts:
|
|
description:
|
|
use "interrupts-extended" when the interrupts are connected to the
|
|
separate interrupt controllers
|
|
minItems: 1
|
|
items:
|
|
- description: xHCI host controller interrupt
|
|
- description: optional, wakeup interrupt used to support runtime PM
|
|
|
|
interrupt-names:
|
|
items:
|
|
- const: host
|
|
- const: wakeup
|
|
|
|
power-domains:
|
|
description: A phandle to USB power domain node to control USB's MTCMOS
|
|
maxItems: 1
|
|
|
|
clocks:
|
|
minItems: 1
|
|
items:
|
|
- description: Controller clock used by normal mode
|
|
- description: Reference clock used by low power mode etc
|
|
- description: Mcu bus clock for register access
|
|
- description: DMA bus clock for data transfer
|
|
- description: controller clock
|
|
|
|
clock-names:
|
|
minItems: 1
|
|
items:
|
|
- const: sys_ck # required, the following ones are optional
|
|
- const: ref_ck
|
|
- const: mcu_ck
|
|
- const: dma_ck
|
|
- const: xhci_ck
|
|
|
|
assigned-clocks:
|
|
minItems: 1
|
|
maxItems: 5
|
|
|
|
assigned-clock-parents:
|
|
minItems: 1
|
|
maxItems: 5
|
|
|
|
phys:
|
|
description:
|
|
List of all PHYs used on this HCD, it's better to keep PHYs in order
|
|
as the hardware layout
|
|
minItems: 1
|
|
items:
|
|
- description: USB2/HS PHY # required, others are optional
|
|
- description: USB3/SS(P) PHY
|
|
- description: USB2/HS PHY
|
|
- description: USB3/SS(P) PHY
|
|
- description: USB2/HS PHY
|
|
- description: USB3/SS(P) PHY
|
|
- description: USB2/HS PHY
|
|
- description: USB3/SS(P) PHY
|
|
- description: USB2/HS PHY
|
|
|
|
vusb33-supply:
|
|
description: Regulator of USB AVDD3.3v
|
|
|
|
vbus-supply:
|
|
description: Regulator of USB VBUS5v
|
|
|
|
usb3-lpm-capable: true
|
|
|
|
usb2-lpm-disable: true
|
|
|
|
imod-interval-ns:
|
|
description:
|
|
Interrupt moderation interval value, it is 8 times as much as that
|
|
defined in the xHCI spec on MTK's controller.
|
|
default: 5000
|
|
|
|
# the following properties are only used for case 1
|
|
wakeup-source:
|
|
description: enable USB remote wakeup, see power/wakeup-source.txt
|
|
type: boolean
|
|
|
|
mediatek,syscon-wakeup:
|
|
$ref: /schemas/types.yaml#/definitions/phandle-array
|
|
maxItems: 1
|
|
description:
|
|
A phandle to syscon used to access the register of the USB wakeup glue
|
|
layer between xHCI and SPM, the field should always be 3 cells long.
|
|
items:
|
|
items:
|
|
- description:
|
|
The first cell represents a phandle to syscon
|
|
- description:
|
|
The second cell represents the register base address of the glue
|
|
layer in syscon
|
|
- description: |
|
|
The third cell represents the hardware version of the glue layer,
|
|
1 - used by mt8173 etc, revision 1 without following IPM rule;
|
|
2 - used by mt2712 etc, revision 2 following IPM rule;
|
|
101 - used by mt8183, specific 1.01;
|
|
102 - used by mt8192, specific 1.02;
|
|
enum: [1, 2, 101, 102]
|
|
|
|
mediatek,u3p-dis-msk:
|
|
$ref: /schemas/types.yaml#/definitions/uint32
|
|
description: The mask to disable u3ports, bit0 for u3port0,
|
|
bit1 for u3port1, ... etc
|
|
|
|
mediatek,u2p-dis-msk:
|
|
$ref: /schemas/types.yaml#/definitions/uint32
|
|
description: The mask to disable u2ports, bit0 for u2port0,
|
|
bit1 for u2port1, ... etc
|
|
|
|
"#address-cells":
|
|
const: 1
|
|
|
|
"#size-cells":
|
|
const: 0
|
|
|
|
patternProperties:
|
|
"@[0-9a-f]{1}$":
|
|
type: object
|
|
description: The hard wired USB devices.
|
|
|
|
dependencies:
|
|
wakeup-source: [ 'mediatek,syscon-wakeup' ]
|
|
|
|
required:
|
|
- compatible
|
|
- reg
|
|
- reg-names
|
|
- interrupts
|
|
- clocks
|
|
- clock-names
|
|
|
|
additionalProperties: false
|
|
|
|
examples:
|
|
- |
|
|
#include <dt-bindings/clock/mt8173-clk.h>
|
|
#include <dt-bindings/interrupt-controller/arm-gic.h>
|
|
#include <dt-bindings/interrupt-controller/irq.h>
|
|
#include <dt-bindings/phy/phy.h>
|
|
#include <dt-bindings/power/mt8173-power.h>
|
|
|
|
usb@11270000 {
|
|
compatible = "mediatek,mt8173-xhci", "mediatek,mtk-xhci";
|
|
reg = <0x11270000 0x1000>, <0x11280700 0x0100>;
|
|
reg-names = "mac", "ippc";
|
|
interrupts = <GIC_SPI 115 IRQ_TYPE_LEVEL_LOW>;
|
|
power-domains = <&scpsys MT8173_POWER_DOMAIN_USB>;
|
|
clocks = <&topckgen CLK_TOP_USB30_SEL>, <&clk26m>;
|
|
clock-names = "sys_ck", "ref_ck";
|
|
phys = <&u3port0 PHY_TYPE_USB3>, <&u2port1 PHY_TYPE_USB2>;
|
|
vusb33-supply = <&mt6397_vusb_reg>;
|
|
vbus-supply = <&usb_p1_vbus>;
|
|
imod-interval-ns = <10000>;
|
|
mediatek,syscon-wakeup = <&pericfg 0x400 1>;
|
|
wakeup-source;
|
|
usb3-lpm-capable;
|
|
};
|
|
...
|