130 lines
4.0 KiB
YAML
130 lines
4.0 KiB
YAML
# SPDX-License-Identifier: GPL-2.0
|
|
%YAML 1.2
|
|
---
|
|
$id: http://devicetree.org/schemas/timer/arm,arch_timer.yaml#
|
|
$schema: http://devicetree.org/meta-schemas/core.yaml#
|
|
|
|
title: ARM architected timer
|
|
|
|
maintainers:
|
|
- Marc Zyngier <marc.zyngier@arm.com>
|
|
- Mark Rutland <mark.rutland@arm.com>
|
|
description: |+
|
|
ARM cores may have a per-core architected timer, which provides per-cpu timers,
|
|
or a memory mapped architected timer, which provides up to 8 frames with a
|
|
physical and optional virtual timer per frame.
|
|
|
|
The per-core architected timer is attached to a GIC to deliver its
|
|
per-processor interrupts via PPIs. The memory mapped timer is attached to a GIC
|
|
to deliver its interrupts via SPIs.
|
|
|
|
properties:
|
|
compatible:
|
|
oneOf:
|
|
- items:
|
|
- enum:
|
|
- arm,cortex-a15-timer
|
|
- enum:
|
|
- arm,armv7-timer
|
|
- items:
|
|
- enum:
|
|
- arm,armv7-timer
|
|
- items:
|
|
- enum:
|
|
- arm,armv8-timer
|
|
|
|
interrupts:
|
|
minItems: 1
|
|
items:
|
|
- description: secure timer irq
|
|
- description: non-secure timer irq
|
|
- description: virtual timer irq
|
|
- description: hypervisor timer irq
|
|
- description: hypervisor virtual timer irq
|
|
|
|
interrupt-names:
|
|
oneOf:
|
|
- minItems: 2
|
|
items:
|
|
- const: phys
|
|
- const: virt
|
|
- const: hyp-phys
|
|
- const: hyp-virt
|
|
- minItems: 3
|
|
items:
|
|
- const: sec-phys
|
|
- const: phys
|
|
- const: virt
|
|
- const: hyp-phys
|
|
- const: hyp-virt
|
|
|
|
clock-frequency:
|
|
description: The frequency of the main counter, in Hz. Should be present
|
|
only where necessary to work around broken firmware which does not configure
|
|
CNTFRQ on all CPUs to a uniform correct value. Use of this property is
|
|
strongly discouraged; fix your firmware unless absolutely impossible.
|
|
|
|
always-on:
|
|
type: boolean
|
|
description: If present, the timer is powered through an always-on power
|
|
domain, therefore it never loses context.
|
|
|
|
allwinner,erratum-unknown1:
|
|
type: boolean
|
|
description: Indicates the presence of an erratum found in Allwinner SoCs,
|
|
where reading certain values from the counter is unreliable. This also
|
|
affects writes to the tval register, due to the implicit counter read.
|
|
|
|
fsl,erratum-a008585:
|
|
type: boolean
|
|
description: Indicates the presence of QorIQ erratum A-008585, which says
|
|
that reading the counter is unreliable unless the same value is returned
|
|
by back-to-back reads. This also affects writes to the tval register, due
|
|
to the implicit counter read.
|
|
|
|
hisilicon,erratum-161010101:
|
|
type: boolean
|
|
description: Indicates the presence of Hisilicon erratum 161010101, which
|
|
says that reading the counters is unreliable in some cases, and reads may
|
|
return a value 32 beyond the correct value. This also affects writes to
|
|
the tval registers, due to the implicit counter read.
|
|
|
|
arm,cpu-registers-not-fw-configured:
|
|
type: boolean
|
|
description: Firmware does not initialize any of the generic timer CPU
|
|
registers, which contain their architecturally-defined reset values. Only
|
|
supported for 32-bit systems which follow the ARMv7 architected reset
|
|
values.
|
|
|
|
arm,no-tick-in-suspend:
|
|
type: boolean
|
|
description: The main counter does not tick when the system is in
|
|
low-power system suspend on some SoCs. This behavior does not match the
|
|
Architecture Reference Manual's specification that the system counter "must
|
|
be implemented in an always-on power domain."
|
|
|
|
required:
|
|
- compatible
|
|
|
|
additionalProperties: false
|
|
|
|
oneOf:
|
|
- required:
|
|
- interrupts
|
|
- required:
|
|
- interrupts-extended
|
|
|
|
examples:
|
|
- |
|
|
timer {
|
|
compatible = "arm,cortex-a15-timer",
|
|
"arm,armv7-timer";
|
|
interrupts = <1 13 0xf08>,
|
|
<1 14 0xf08>,
|
|
<1 11 0xf08>,
|
|
<1 10 0xf08>;
|
|
clock-frequency = <100000000>;
|
|
};
|
|
|
|
...
|