117 lines
3.2 KiB
Plaintext
117 lines
3.2 KiB
Plaintext
* Analog Devices ADV748X video decoder with HDMI receiver
|
|
|
|
The ADV7481 and ADV7482 are multi format video decoders with an integrated
|
|
HDMI receiver. They can output CSI-2 on two independent outputs TXA and TXB
|
|
from three input sources HDMI, analog and TTL.
|
|
|
|
Required Properties:
|
|
|
|
- compatible: Must contain one of the following
|
|
- "adi,adv7481" for the ADV7481
|
|
- "adi,adv7482" for the ADV7482
|
|
|
|
- reg: I2C slave addresses
|
|
The ADV748x has up to twelve 256-byte maps that can be accessed via the
|
|
main I2C ports. Each map has it own I2C address and acts as a standard
|
|
slave device on the I2C bus. The main address is mandatory, others are
|
|
optional and remain at default values if not specified.
|
|
|
|
Optional Properties:
|
|
|
|
- interrupt-names: Should specify the interrupts as "intrq1", "intrq2" and/or
|
|
"intrq3". All interrupts are optional. The "intrq3" interrupt
|
|
is only available on the adv7481
|
|
- interrupts: Specify the interrupt lines for the ADV748x
|
|
- reg-names : Names of maps with programmable addresses.
|
|
It shall contain all maps needing a non-default address.
|
|
Possible map names are:
|
|
"main", "dpll", "cp", "hdmi", "edid", "repeater",
|
|
"infoframe", "cbus", "cec", "sdp", "txa", "txb"
|
|
|
|
The device node must contain one 'port' child node per device input and output
|
|
port, in accordance with the video interface bindings defined in
|
|
Documentation/devicetree/bindings/media/video-interfaces.txt. The port nodes
|
|
are numbered as follows.
|
|
|
|
Name Type Port
|
|
---------------------------------------
|
|
AIN0 sink 0
|
|
AIN1 sink 1
|
|
AIN2 sink 2
|
|
AIN3 sink 3
|
|
AIN4 sink 4
|
|
AIN5 sink 5
|
|
AIN6 sink 6
|
|
AIN7 sink 7
|
|
HDMI sink 8
|
|
TTL sink 9
|
|
TXA source 10
|
|
TXB source 11
|
|
|
|
The digital output port nodes, when present, shall contain at least one
|
|
endpoint. Each of those endpoints shall contain the data-lanes property as
|
|
described in video-interfaces.txt.
|
|
|
|
Required source endpoint properties:
|
|
- data-lanes: an array of physical data lane indexes
|
|
The accepted value(s) for this property depends on which of the two
|
|
sources are described. For TXA 1, 2 or 4 data lanes can be described
|
|
while for TXB only 1 data lane is valid. See video-interfaces.txt
|
|
for detailed description.
|
|
|
|
Ports are optional if they are not connected to anything at the hardware level.
|
|
|
|
Example:
|
|
|
|
video-receiver@70 {
|
|
compatible = "adi,adv7482";
|
|
reg = <0x70 0x71 0x72 0x73 0x74 0x75
|
|
0x60 0x61 0x62 0x63 0x64 0x65>;
|
|
reg-names = "main", "dpll", "cp", "hdmi", "edid", "repeater",
|
|
"infoframe", "cbus", "cec", "sdp", "txa", "txb";
|
|
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
|
|
interrupt-parent = <&gpio6>;
|
|
interrupt-names = "intrq1", "intrq2";
|
|
interrupts = <30 IRQ_TYPE_LEVEL_LOW>,
|
|
<31 IRQ_TYPE_LEVEL_LOW>;
|
|
|
|
port@7 {
|
|
reg = <7>;
|
|
|
|
adv7482_ain7: endpoint {
|
|
remote-endpoint = <&cvbs_in>;
|
|
};
|
|
};
|
|
|
|
port@8 {
|
|
reg = <8>;
|
|
|
|
adv7482_hdmi: endpoint {
|
|
remote-endpoint = <&hdmi_in>;
|
|
};
|
|
};
|
|
|
|
port@a {
|
|
reg = <10>;
|
|
|
|
adv7482_txa: endpoint {
|
|
clock-lanes = <0>;
|
|
data-lanes = <1 2 3 4>;
|
|
remote-endpoint = <&csi40_in>;
|
|
};
|
|
};
|
|
|
|
port@b {
|
|
reg = <11>;
|
|
|
|
adv7482_txb: endpoint {
|
|
clock-lanes = <0>;
|
|
data-lanes = <1>;
|
|
remote-endpoint = <&csi20_in>;
|
|
};
|
|
};
|
|
};
|