47 lines
1.3 KiB
Plaintext
47 lines
1.3 KiB
Plaintext
Turris Mox module status and configuration bus (over SPI)
|
|
|
|
Required properties:
|
|
- compatible : Should be "cznic,moxtet"
|
|
- #address-cells : Has to be 1
|
|
- #size-cells : Has to be 0
|
|
- spi-cpol : Required inverted clock polarity
|
|
- spi-cpha : Required shifted clock phase
|
|
- interrupts : Must contain reference to the shared interrupt line
|
|
- interrupt-controller : Required
|
|
- #interrupt-cells : Has to be 1
|
|
|
|
For other required and optional properties of SPI slave nodes please refer to
|
|
../spi/spi-bus.txt.
|
|
|
|
Required properties of subnodes:
|
|
- reg : Should be position on the Moxtet bus (how many Moxtet
|
|
modules are between this module and CPU module, so
|
|
either 0 or a positive integer)
|
|
|
|
The driver finds the devices connected to the bus by itself, but it may be
|
|
needed to reference some of them from other parts of the device tree. In that
|
|
case the devices can be defined as subnodes of the moxtet node.
|
|
|
|
Example:
|
|
|
|
moxtet@1 {
|
|
compatible = "cznic,moxtet";
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
reg = <1>;
|
|
spi-max-frequency = <10000000>;
|
|
spi-cpol;
|
|
spi-cpha;
|
|
interrupt-controller;
|
|
#interrupt-cells = <1>;
|
|
interrupt-parent = <&gpiosb>;
|
|
interrupts = <5 IRQ_TYPE_EDGE_FALLING>;
|
|
|
|
moxtet_sfp: gpio@0 {
|
|
compatible = "cznic,moxtet-gpio";
|
|
gpio-controller;
|
|
#gpio-cells = <2>;
|
|
reg = <0>;
|
|
}
|
|
};
|