OpenCloudOS-Kernel/drivers/usb
Alan Stern 81e3833351 USB: OHCI: add I/O watchdog for orphan TDs
Some OHCI controllers have a bug: They fail to add completed TDs to
the done queue.  Examining this queue is the only method ohci-hcd has
for telling when a transfer is complete; failure to add a TD can
result in an URB that never completes and cannot be unlinked.

This patch adds a watchdog routine to ohci-hcd.  The routine
periodically scans the active ED and TD lists, looking for TDs which
are finished but not on the done queue.  When one is found, and it is
certain that the controller hardware will never add the TD to the done
queue, the watchdog routine manually puts the TD on the done list so
that it can be handled normally.

The watchdog routine also checks for a condition indicating the
controller has died.  If the done queue is non-empty but the
HccaDoneHead pointer hasn't been updated for a few hundred
milliseconds, we assume the controller will never update it and
therefore is dead.

Signed-off-by: Alan Stern <stern@rowland.harvard.edu>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-07-18 16:34:07 -07:00
..
atm usb: delete non-required instances of include <linux/init.h> 2014-01-08 15:01:39 -08:00
c67x00 USB: c67x00: correct spelling mistakes in comments 2014-01-08 15:05:14 -08:00
chipidea usb: chipidea: udc: delete td from req's td list at ep_dequeue 2014-07-01 23:06:02 -07:00
class usb: class: usbtmc.c: Cleaning up uninitialized variables 2014-07-09 15:59:10 -07:00
common usb: common: rename phy-fsm-usb.c to usb-otg-fsm.c 2014-05-27 15:29:44 -07:00
core USB: Fix persist resume of some SS USB devices 2014-07-18 16:18:11 -07:00
dwc2 usb: dwc2: gadget: remove incorrect file reference 2014-07-09 15:56:13 -07:00
dwc3 dwc3: host: Enable USB3 LPM capability 2014-07-09 15:41:34 -07:00
early USB: ehci-dbgp: drop dead code. 2013-09-26 16:25:21 -07:00
gadget USB: gadget: Fixed a few typos in comments 2014-07-09 16:05:52 -07:00
host USB: OHCI: add I/O watchdog for orphan TDs 2014-07-18 16:34:07 -07:00
image USB: image: correct spelling mistake in comment 2014-01-08 15:08:14 -08:00
misc USB: Add LVS Test device driver 2014-07-17 17:11:09 -07:00
mon USB: regroup all depends on USB within an if USB block 2013-04-09 16:49:07 -07:00
musb usb: musb: dsps: fix the base address for accessing the mode register 2014-06-30 13:31:48 -05:00
phy USB: PHY: tegra: Call tegra_usb_phy_close only on device removal 2014-07-09 16:25:46 -07:00
renesas_usbhs usb: renesas: gadget: fixup: complete STATUS stage after receiving 2014-06-19 10:06:46 -05:00
serial USB: serial: cp210x: Removing unncessary `usb_reset_device` on startup 2014-07-17 17:12:13 -07:00
storage usb-storage/SCSI: Add broken_fua blacklist flag 2014-06-30 22:47:18 -07:00
wusbcore USB: wusbcore: fix control-pipe directions 2014-05-27 15:04:10 -07:00
Kconfig usb: host: remove USB_ARCH_HAS_?HCI 2014-02-18 12:36:38 -08:00
Makefile usb: move usb/usb-common.c to usb/common/usb-common.c 2014-05-27 15:29:44 -07:00
README
usb-skeleton.c usb: delete non-required instances of include <linux/init.h> 2014-01-08 15:01:39 -08:00

README

To understand all the Linux-USB framework, you'll use these resources:

    * This source code.  This is necessarily an evolving work, and
      includes kerneldoc that should help you get a current overview.
      ("make pdfdocs", and then look at "usb.pdf" for host side and
      "gadget.pdf" for peripheral side.)  Also, Documentation/usb has
      more information.

    * The USB 2.0 specification (from www.usb.org), with supplements
      such as those for USB OTG and the various device classes.
      The USB specification has a good overview chapter, and USB
      peripherals conform to the widely known "Chapter 9".

    * Chip specifications for USB controllers.  Examples include
      host controllers (on PCs, servers, and more); peripheral
      controllers (in devices with Linux firmware, like printers or
      cell phones); and hard-wired peripherals like Ethernet adapters.

    * Specifications for other protocols implemented by USB peripheral
      functions.  Some are vendor-specific; others are vendor-neutral
      but just standardized outside of the www.usb.org team.

Here is a list of what each subdirectory here is, and what is contained in
them.

core/		- This is for the core USB host code, including the
		  usbfs files and the hub class driver ("khubd").

host/		- This is for USB host controller drivers.  This
		  includes UHCI, OHCI, EHCI, and others that might
		  be used with more specialized "embedded" systems.

gadget/		- This is for USB peripheral controller drivers and
		  the various gadget drivers which talk to them.


Individual USB driver directories.  A new driver should be added to the
first subdirectory in the list below that it fits into.

image/		- This is for still image drivers, like scanners or
		  digital cameras.
../input/	- This is for any driver that uses the input subsystem,
		  like keyboard, mice, touchscreens, tablets, etc.
../media/	- This is for multimedia drivers, like video cameras,
		  radios, and any other drivers that talk to the v4l
		  subsystem.
../net/		- This is for network drivers.
serial/		- This is for USB to serial drivers.
storage/	- This is for USB mass-storage drivers.
class/		- This is for all USB device drivers that do not fit
		  into any of the above categories, and work for a range
		  of USB Class specified devices. 
misc/		- This is for all USB device drivers that do not fit
		  into any of the above categories.