1045 lines
26 KiB
C
1045 lines
26 KiB
C
// SPDX-License-Identifier: GPL-2.0-or-later
|
|
/*
|
|
* Epson HWA742 LCD controller driver
|
|
*
|
|
* Copyright (C) 2004-2005 Nokia Corporation
|
|
* Authors: Juha Yrjölä <juha.yrjola@nokia.com>
|
|
* Imre Deak <imre.deak@nokia.com>
|
|
* YUV support: Jussi Laako <jussi.laako@nokia.com>
|
|
*/
|
|
#include <linux/module.h>
|
|
#include <linux/mm.h>
|
|
#include <linux/fb.h>
|
|
#include <linux/delay.h>
|
|
#include <linux/clk.h>
|
|
#include <linux/interrupt.h>
|
|
|
|
#include "omapfb.h"
|
|
|
|
#define HWA742_REV_CODE_REG 0x0
|
|
#define HWA742_CONFIG_REG 0x2
|
|
#define HWA742_PLL_DIV_REG 0x4
|
|
#define HWA742_PLL_0_REG 0x6
|
|
#define HWA742_PLL_1_REG 0x8
|
|
#define HWA742_PLL_2_REG 0xa
|
|
#define HWA742_PLL_3_REG 0xc
|
|
#define HWA742_PLL_4_REG 0xe
|
|
#define HWA742_CLK_SRC_REG 0x12
|
|
#define HWA742_PANEL_TYPE_REG 0x14
|
|
#define HWA742_H_DISP_REG 0x16
|
|
#define HWA742_H_NDP_REG 0x18
|
|
#define HWA742_V_DISP_1_REG 0x1a
|
|
#define HWA742_V_DISP_2_REG 0x1c
|
|
#define HWA742_V_NDP_REG 0x1e
|
|
#define HWA742_HS_W_REG 0x20
|
|
#define HWA742_HP_S_REG 0x22
|
|
#define HWA742_VS_W_REG 0x24
|
|
#define HWA742_VP_S_REG 0x26
|
|
#define HWA742_PCLK_POL_REG 0x28
|
|
#define HWA742_INPUT_MODE_REG 0x2a
|
|
#define HWA742_TRANSL_MODE_REG1 0x2e
|
|
#define HWA742_DISP_MODE_REG 0x34
|
|
#define HWA742_WINDOW_TYPE 0x36
|
|
#define HWA742_WINDOW_X_START_0 0x38
|
|
#define HWA742_WINDOW_X_START_1 0x3a
|
|
#define HWA742_WINDOW_Y_START_0 0x3c
|
|
#define HWA742_WINDOW_Y_START_1 0x3e
|
|
#define HWA742_WINDOW_X_END_0 0x40
|
|
#define HWA742_WINDOW_X_END_1 0x42
|
|
#define HWA742_WINDOW_Y_END_0 0x44
|
|
#define HWA742_WINDOW_Y_END_1 0x46
|
|
#define HWA742_MEMORY_WRITE_LSB 0x48
|
|
#define HWA742_MEMORY_WRITE_MSB 0x49
|
|
#define HWA742_MEMORY_READ_0 0x4a
|
|
#define HWA742_MEMORY_READ_1 0x4c
|
|
#define HWA742_MEMORY_READ_2 0x4e
|
|
#define HWA742_POWER_SAVE 0x56
|
|
#define HWA742_NDP_CTRL 0x58
|
|
|
|
#define HWA742_AUTO_UPDATE_TIME (HZ / 20)
|
|
|
|
/* Reserve 4 request slots for requests in irq context */
|
|
#define REQ_POOL_SIZE 24
|
|
#define IRQ_REQ_POOL_SIZE 4
|
|
|
|
#define REQ_FROM_IRQ_POOL 0x01
|
|
|
|
#define REQ_COMPLETE 0
|
|
#define REQ_PENDING 1
|
|
|
|
struct update_param {
|
|
int x, y, width, height;
|
|
int color_mode;
|
|
int flags;
|
|
};
|
|
|
|
struct hwa742_request {
|
|
struct list_head entry;
|
|
unsigned int flags;
|
|
|
|
int (*handler)(struct hwa742_request *req);
|
|
void (*complete)(void *data);
|
|
void *complete_data;
|
|
|
|
union {
|
|
struct update_param update;
|
|
struct completion *sync;
|
|
} par;
|
|
};
|
|
|
|
struct {
|
|
enum omapfb_update_mode update_mode;
|
|
enum omapfb_update_mode update_mode_before_suspend;
|
|
|
|
struct timer_list auto_update_timer;
|
|
int stop_auto_update;
|
|
struct omapfb_update_window auto_update_window;
|
|
unsigned te_connected:1;
|
|
unsigned vsync_only:1;
|
|
|
|
struct hwa742_request req_pool[REQ_POOL_SIZE];
|
|
struct list_head pending_req_list;
|
|
struct list_head free_req_list;
|
|
struct semaphore req_sema;
|
|
spinlock_t req_lock;
|
|
|
|
struct extif_timings reg_timings, lut_timings;
|
|
|
|
int prev_color_mode;
|
|
int prev_flags;
|
|
int window_type;
|
|
|
|
u32 max_transmit_size;
|
|
u32 extif_clk_period;
|
|
unsigned long pix_tx_time;
|
|
unsigned long line_upd_time;
|
|
|
|
|
|
struct omapfb_device *fbdev;
|
|
struct lcd_ctrl_extif *extif;
|
|
const struct lcd_ctrl *int_ctrl;
|
|
|
|
struct clk *sys_ck;
|
|
} hwa742;
|
|
|
|
struct lcd_ctrl hwa742_ctrl;
|
|
|
|
static u8 hwa742_read_reg(u8 reg)
|
|
{
|
|
u8 data;
|
|
|
|
hwa742.extif->set_bits_per_cycle(8);
|
|
hwa742.extif->write_command(®, 1);
|
|
hwa742.extif->read_data(&data, 1);
|
|
|
|
return data;
|
|
}
|
|
|
|
static void hwa742_write_reg(u8 reg, u8 data)
|
|
{
|
|
hwa742.extif->set_bits_per_cycle(8);
|
|
hwa742.extif->write_command(®, 1);
|
|
hwa742.extif->write_data(&data, 1);
|
|
}
|
|
|
|
static void set_window_regs(int x_start, int y_start, int x_end, int y_end)
|
|
{
|
|
u8 tmp[8];
|
|
u8 cmd;
|
|
|
|
x_end--;
|
|
y_end--;
|
|
tmp[0] = x_start;
|
|
tmp[1] = x_start >> 8;
|
|
tmp[2] = y_start;
|
|
tmp[3] = y_start >> 8;
|
|
tmp[4] = x_end;
|
|
tmp[5] = x_end >> 8;
|
|
tmp[6] = y_end;
|
|
tmp[7] = y_end >> 8;
|
|
|
|
hwa742.extif->set_bits_per_cycle(8);
|
|
cmd = HWA742_WINDOW_X_START_0;
|
|
|
|
hwa742.extif->write_command(&cmd, 1);
|
|
|
|
hwa742.extif->write_data(tmp, 8);
|
|
}
|
|
|
|
static void set_format_regs(int conv, int transl, int flags)
|
|
{
|
|
if (flags & OMAPFB_FORMAT_FLAG_DOUBLE) {
|
|
hwa742.window_type = ((hwa742.window_type & 0xfc) | 0x01);
|
|
#ifdef VERBOSE
|
|
dev_dbg(hwa742.fbdev->dev, "hwa742: enabled pixel doubling\n");
|
|
#endif
|
|
} else {
|
|
hwa742.window_type = (hwa742.window_type & 0xfc);
|
|
#ifdef VERBOSE
|
|
dev_dbg(hwa742.fbdev->dev, "hwa742: disabled pixel doubling\n");
|
|
#endif
|
|
}
|
|
|
|
hwa742_write_reg(HWA742_INPUT_MODE_REG, conv);
|
|
hwa742_write_reg(HWA742_TRANSL_MODE_REG1, transl);
|
|
hwa742_write_reg(HWA742_WINDOW_TYPE, hwa742.window_type);
|
|
}
|
|
|
|
static void enable_tearsync(int y, int width, int height, int screen_height,
|
|
int force_vsync)
|
|
{
|
|
u8 b;
|
|
|
|
b = hwa742_read_reg(HWA742_NDP_CTRL);
|
|
b |= 1 << 2;
|
|
hwa742_write_reg(HWA742_NDP_CTRL, b);
|
|
|
|
if (likely(hwa742.vsync_only || force_vsync)) {
|
|
hwa742.extif->enable_tearsync(1, 0);
|
|
return;
|
|
}
|
|
|
|
if (width * hwa742.pix_tx_time < hwa742.line_upd_time) {
|
|
hwa742.extif->enable_tearsync(1, 0);
|
|
return;
|
|
}
|
|
|
|
if ((width * hwa742.pix_tx_time / 1000) * height <
|
|
(y + height) * (hwa742.line_upd_time / 1000)) {
|
|
hwa742.extif->enable_tearsync(1, 0);
|
|
return;
|
|
}
|
|
|
|
hwa742.extif->enable_tearsync(1, y + 1);
|
|
}
|
|
|
|
static void disable_tearsync(void)
|
|
{
|
|
u8 b;
|
|
|
|
hwa742.extif->enable_tearsync(0, 0);
|
|
|
|
b = hwa742_read_reg(HWA742_NDP_CTRL);
|
|
b &= ~(1 << 2);
|
|
hwa742_write_reg(HWA742_NDP_CTRL, b);
|
|
}
|
|
|
|
static inline struct hwa742_request *alloc_req(void)
|
|
{
|
|
unsigned long flags;
|
|
struct hwa742_request *req;
|
|
int req_flags = 0;
|
|
|
|
if (!in_interrupt())
|
|
down(&hwa742.req_sema);
|
|
else
|
|
req_flags = REQ_FROM_IRQ_POOL;
|
|
|
|
spin_lock_irqsave(&hwa742.req_lock, flags);
|
|
BUG_ON(list_empty(&hwa742.free_req_list));
|
|
req = list_entry(hwa742.free_req_list.next,
|
|
struct hwa742_request, entry);
|
|
list_del(&req->entry);
|
|
spin_unlock_irqrestore(&hwa742.req_lock, flags);
|
|
|
|
INIT_LIST_HEAD(&req->entry);
|
|
req->flags = req_flags;
|
|
|
|
return req;
|
|
}
|
|
|
|
static inline void free_req(struct hwa742_request *req)
|
|
{
|
|
unsigned long flags;
|
|
|
|
spin_lock_irqsave(&hwa742.req_lock, flags);
|
|
|
|
list_move(&req->entry, &hwa742.free_req_list);
|
|
if (!(req->flags & REQ_FROM_IRQ_POOL))
|
|
up(&hwa742.req_sema);
|
|
|
|
spin_unlock_irqrestore(&hwa742.req_lock, flags);
|
|
}
|
|
|
|
static void process_pending_requests(void)
|
|
{
|
|
unsigned long flags;
|
|
|
|
spin_lock_irqsave(&hwa742.req_lock, flags);
|
|
|
|
while (!list_empty(&hwa742.pending_req_list)) {
|
|
struct hwa742_request *req;
|
|
void (*complete)(void *);
|
|
void *complete_data;
|
|
|
|
req = list_entry(hwa742.pending_req_list.next,
|
|
struct hwa742_request, entry);
|
|
spin_unlock_irqrestore(&hwa742.req_lock, flags);
|
|
|
|
if (req->handler(req) == REQ_PENDING)
|
|
return;
|
|
|
|
complete = req->complete;
|
|
complete_data = req->complete_data;
|
|
free_req(req);
|
|
|
|
if (complete)
|
|
complete(complete_data);
|
|
|
|
spin_lock_irqsave(&hwa742.req_lock, flags);
|
|
}
|
|
|
|
spin_unlock_irqrestore(&hwa742.req_lock, flags);
|
|
}
|
|
|
|
static void submit_req_list(struct list_head *head)
|
|
{
|
|
unsigned long flags;
|
|
int process = 1;
|
|
|
|
spin_lock_irqsave(&hwa742.req_lock, flags);
|
|
if (likely(!list_empty(&hwa742.pending_req_list)))
|
|
process = 0;
|
|
list_splice_init(head, hwa742.pending_req_list.prev);
|
|
spin_unlock_irqrestore(&hwa742.req_lock, flags);
|
|
|
|
if (process)
|
|
process_pending_requests();
|
|
}
|
|
|
|
static void request_complete(void *data)
|
|
{
|
|
struct hwa742_request *req = (struct hwa742_request *)data;
|
|
void (*complete)(void *);
|
|
void *complete_data;
|
|
|
|
complete = req->complete;
|
|
complete_data = req->complete_data;
|
|
|
|
free_req(req);
|
|
|
|
if (complete)
|
|
complete(complete_data);
|
|
|
|
process_pending_requests();
|
|
}
|
|
|
|
static int send_frame_handler(struct hwa742_request *req)
|
|
{
|
|
struct update_param *par = &req->par.update;
|
|
int x = par->x;
|
|
int y = par->y;
|
|
int w = par->width;
|
|
int h = par->height;
|
|
int bpp;
|
|
int conv, transl;
|
|
unsigned long offset;
|
|
int color_mode = par->color_mode;
|
|
int flags = par->flags;
|
|
int scr_width = hwa742.fbdev->panel->x_res;
|
|
int scr_height = hwa742.fbdev->panel->y_res;
|
|
|
|
#ifdef VERBOSE
|
|
dev_dbg(hwa742.fbdev->dev, "x %d y %d w %d h %d scr_width %d "
|
|
"color_mode %d flags %d\n",
|
|
x, y, w, h, scr_width, color_mode, flags);
|
|
#endif
|
|
|
|
switch (color_mode) {
|
|
case OMAPFB_COLOR_YUV422:
|
|
bpp = 16;
|
|
conv = 0x08;
|
|
transl = 0x25;
|
|
break;
|
|
case OMAPFB_COLOR_YUV420:
|
|
bpp = 12;
|
|
conv = 0x09;
|
|
transl = 0x25;
|
|
break;
|
|
case OMAPFB_COLOR_RGB565:
|
|
bpp = 16;
|
|
conv = 0x01;
|
|
transl = 0x05;
|
|
break;
|
|
default:
|
|
return -EINVAL;
|
|
}
|
|
|
|
if (hwa742.prev_flags != flags ||
|
|
hwa742.prev_color_mode != color_mode) {
|
|
set_format_regs(conv, transl, flags);
|
|
hwa742.prev_color_mode = color_mode;
|
|
hwa742.prev_flags = flags;
|
|
}
|
|
flags = req->par.update.flags;
|
|
if (flags & OMAPFB_FORMAT_FLAG_TEARSYNC)
|
|
enable_tearsync(y, scr_width, h, scr_height,
|
|
flags & OMAPFB_FORMAT_FLAG_FORCE_VSYNC);
|
|
else
|
|
disable_tearsync();
|
|
|
|
set_window_regs(x, y, x + w, y + h);
|
|
|
|
offset = (scr_width * y + x) * bpp / 8;
|
|
|
|
hwa742.int_ctrl->setup_plane(OMAPFB_PLANE_GFX,
|
|
OMAPFB_CHANNEL_OUT_LCD, offset, scr_width, 0, 0, w, h,
|
|
color_mode);
|
|
|
|
hwa742.extif->set_bits_per_cycle(16);
|
|
|
|
hwa742.int_ctrl->enable_plane(OMAPFB_PLANE_GFX, 1);
|
|
hwa742.extif->transfer_area(w, h, request_complete, req);
|
|
|
|
return REQ_PENDING;
|
|
}
|
|
|
|
static void send_frame_complete(void *data)
|
|
{
|
|
hwa742.int_ctrl->enable_plane(OMAPFB_PLANE_GFX, 0);
|
|
}
|
|
|
|
#define ADD_PREQ(_x, _y, _w, _h) do { \
|
|
req = alloc_req(); \
|
|
req->handler = send_frame_handler; \
|
|
req->complete = send_frame_complete; \
|
|
req->par.update.x = _x; \
|
|
req->par.update.y = _y; \
|
|
req->par.update.width = _w; \
|
|
req->par.update.height = _h; \
|
|
req->par.update.color_mode = color_mode;\
|
|
req->par.update.flags = flags; \
|
|
list_add_tail(&req->entry, req_head); \
|
|
} while(0)
|
|
|
|
static void create_req_list(struct omapfb_update_window *win,
|
|
struct list_head *req_head)
|
|
{
|
|
struct hwa742_request *req;
|
|
int x = win->x;
|
|
int y = win->y;
|
|
int width = win->width;
|
|
int height = win->height;
|
|
int color_mode;
|
|
int flags;
|
|
|
|
flags = win->format & ~OMAPFB_FORMAT_MASK;
|
|
color_mode = win->format & OMAPFB_FORMAT_MASK;
|
|
|
|
if (x & 1) {
|
|
ADD_PREQ(x, y, 1, height);
|
|
width--;
|
|
x++;
|
|
flags &= ~OMAPFB_FORMAT_FLAG_TEARSYNC;
|
|
}
|
|
if (width & ~1) {
|
|
unsigned int xspan = width & ~1;
|
|
unsigned int ystart = y;
|
|
unsigned int yspan = height;
|
|
|
|
if (xspan * height * 2 > hwa742.max_transmit_size) {
|
|
yspan = hwa742.max_transmit_size / (xspan * 2);
|
|
ADD_PREQ(x, ystart, xspan, yspan);
|
|
ystart += yspan;
|
|
yspan = height - yspan;
|
|
flags &= ~OMAPFB_FORMAT_FLAG_TEARSYNC;
|
|
}
|
|
|
|
ADD_PREQ(x, ystart, xspan, yspan);
|
|
x += xspan;
|
|
width -= xspan;
|
|
flags &= ~OMAPFB_FORMAT_FLAG_TEARSYNC;
|
|
}
|
|
if (width)
|
|
ADD_PREQ(x, y, 1, height);
|
|
}
|
|
|
|
static void auto_update_complete(void *data)
|
|
{
|
|
if (!hwa742.stop_auto_update)
|
|
mod_timer(&hwa742.auto_update_timer,
|
|
jiffies + HWA742_AUTO_UPDATE_TIME);
|
|
}
|
|
|
|
static void hwa742_update_window_auto(struct timer_list *unused)
|
|
{
|
|
LIST_HEAD(req_list);
|
|
struct hwa742_request *last;
|
|
|
|
create_req_list(&hwa742.auto_update_window, &req_list);
|
|
last = list_entry(req_list.prev, struct hwa742_request, entry);
|
|
|
|
last->complete = auto_update_complete;
|
|
last->complete_data = NULL;
|
|
|
|
submit_req_list(&req_list);
|
|
}
|
|
|
|
int hwa742_update_window_async(struct fb_info *fbi,
|
|
struct omapfb_update_window *win,
|
|
void (*complete_callback)(void *arg),
|
|
void *complete_callback_data)
|
|
{
|
|
LIST_HEAD(req_list);
|
|
struct hwa742_request *last;
|
|
int r = 0;
|
|
|
|
if (hwa742.update_mode != OMAPFB_MANUAL_UPDATE) {
|
|
dev_dbg(hwa742.fbdev->dev, "invalid update mode\n");
|
|
r = -EINVAL;
|
|
goto out;
|
|
}
|
|
if (unlikely(win->format &
|
|
~(0x03 | OMAPFB_FORMAT_FLAG_DOUBLE |
|
|
OMAPFB_FORMAT_FLAG_TEARSYNC | OMAPFB_FORMAT_FLAG_FORCE_VSYNC))) {
|
|
dev_dbg(hwa742.fbdev->dev, "invalid window flag\n");
|
|
r = -EINVAL;
|
|
goto out;
|
|
}
|
|
|
|
create_req_list(win, &req_list);
|
|
last = list_entry(req_list.prev, struct hwa742_request, entry);
|
|
|
|
last->complete = complete_callback;
|
|
last->complete_data = (void *)complete_callback_data;
|
|
|
|
submit_req_list(&req_list);
|
|
|
|
out:
|
|
return r;
|
|
}
|
|
EXPORT_SYMBOL(hwa742_update_window_async);
|
|
|
|
static int hwa742_setup_plane(int plane, int channel_out,
|
|
unsigned long offset, int screen_width,
|
|
int pos_x, int pos_y, int width, int height,
|
|
int color_mode)
|
|
{
|
|
if (plane != OMAPFB_PLANE_GFX ||
|
|
channel_out != OMAPFB_CHANNEL_OUT_LCD)
|
|
return -EINVAL;
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int hwa742_enable_plane(int plane, int enable)
|
|
{
|
|
if (plane != 0)
|
|
return -EINVAL;
|
|
|
|
hwa742.int_ctrl->enable_plane(plane, enable);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int sync_handler(struct hwa742_request *req)
|
|
{
|
|
complete(req->par.sync);
|
|
return REQ_COMPLETE;
|
|
}
|
|
|
|
static void hwa742_sync(void)
|
|
{
|
|
LIST_HEAD(req_list);
|
|
struct hwa742_request *req;
|
|
struct completion comp;
|
|
|
|
req = alloc_req();
|
|
|
|
req->handler = sync_handler;
|
|
req->complete = NULL;
|
|
init_completion(&comp);
|
|
req->par.sync = ∁
|
|
|
|
list_add(&req->entry, &req_list);
|
|
submit_req_list(&req_list);
|
|
|
|
wait_for_completion(&comp);
|
|
}
|
|
|
|
static void hwa742_bind_client(struct omapfb_notifier_block *nb)
|
|
{
|
|
dev_dbg(hwa742.fbdev->dev, "update_mode %d\n", hwa742.update_mode);
|
|
if (hwa742.update_mode == OMAPFB_MANUAL_UPDATE) {
|
|
omapfb_notify_clients(hwa742.fbdev, OMAPFB_EVENT_READY);
|
|
}
|
|
}
|
|
|
|
static int hwa742_set_update_mode(enum omapfb_update_mode mode)
|
|
{
|
|
if (mode != OMAPFB_MANUAL_UPDATE && mode != OMAPFB_AUTO_UPDATE &&
|
|
mode != OMAPFB_UPDATE_DISABLED)
|
|
return -EINVAL;
|
|
|
|
if (mode == hwa742.update_mode)
|
|
return 0;
|
|
|
|
dev_info(hwa742.fbdev->dev, "HWA742: setting update mode to %s\n",
|
|
mode == OMAPFB_UPDATE_DISABLED ? "disabled" :
|
|
(mode == OMAPFB_AUTO_UPDATE ? "auto" : "manual"));
|
|
|
|
switch (hwa742.update_mode) {
|
|
case OMAPFB_MANUAL_UPDATE:
|
|
omapfb_notify_clients(hwa742.fbdev, OMAPFB_EVENT_DISABLED);
|
|
break;
|
|
case OMAPFB_AUTO_UPDATE:
|
|
hwa742.stop_auto_update = 1;
|
|
del_timer_sync(&hwa742.auto_update_timer);
|
|
break;
|
|
case OMAPFB_UPDATE_DISABLED:
|
|
break;
|
|
}
|
|
|
|
hwa742.update_mode = mode;
|
|
hwa742_sync();
|
|
hwa742.stop_auto_update = 0;
|
|
|
|
switch (mode) {
|
|
case OMAPFB_MANUAL_UPDATE:
|
|
omapfb_notify_clients(hwa742.fbdev, OMAPFB_EVENT_READY);
|
|
break;
|
|
case OMAPFB_AUTO_UPDATE:
|
|
hwa742_update_window_auto(0);
|
|
break;
|
|
case OMAPFB_UPDATE_DISABLED:
|
|
break;
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
static enum omapfb_update_mode hwa742_get_update_mode(void)
|
|
{
|
|
return hwa742.update_mode;
|
|
}
|
|
|
|
static unsigned long round_to_extif_ticks(unsigned long ps, int div)
|
|
{
|
|
int bus_tick = hwa742.extif_clk_period * div;
|
|
return (ps + bus_tick - 1) / bus_tick * bus_tick;
|
|
}
|
|
|
|
static int calc_reg_timing(unsigned long sysclk, int div)
|
|
{
|
|
struct extif_timings *t;
|
|
unsigned long systim;
|
|
|
|
/* CSOnTime 0, WEOnTime 2 ns, REOnTime 2 ns,
|
|
* AccessTime 2 ns + 12.2 ns (regs),
|
|
* WEOffTime = WEOnTime + 1 ns,
|
|
* REOffTime = REOnTime + 16 ns (regs),
|
|
* CSOffTime = REOffTime + 1 ns
|
|
* ReadCycle = 2ns + 2*SYSCLK (regs),
|
|
* WriteCycle = 2*SYSCLK + 2 ns,
|
|
* CSPulseWidth = 10 ns */
|
|
systim = 1000000000 / (sysclk / 1000);
|
|
dev_dbg(hwa742.fbdev->dev, "HWA742 systim %lu ps extif_clk_period %u ps"
|
|
"extif_clk_div %d\n", systim, hwa742.extif_clk_period, div);
|
|
|
|
t = &hwa742.reg_timings;
|
|
memset(t, 0, sizeof(*t));
|
|
t->clk_div = div;
|
|
t->cs_on_time = 0;
|
|
t->we_on_time = round_to_extif_ticks(t->cs_on_time + 2000, div);
|
|
t->re_on_time = round_to_extif_ticks(t->cs_on_time + 2000, div);
|
|
t->access_time = round_to_extif_ticks(t->re_on_time + 12200, div);
|
|
t->we_off_time = round_to_extif_ticks(t->we_on_time + 1000, div);
|
|
t->re_off_time = round_to_extif_ticks(t->re_on_time + 16000, div);
|
|
t->cs_off_time = round_to_extif_ticks(t->re_off_time + 1000, div);
|
|
t->we_cycle_time = round_to_extif_ticks(2 * systim + 2000, div);
|
|
if (t->we_cycle_time < t->we_off_time)
|
|
t->we_cycle_time = t->we_off_time;
|
|
t->re_cycle_time = round_to_extif_ticks(2 * systim + 2000, div);
|
|
if (t->re_cycle_time < t->re_off_time)
|
|
t->re_cycle_time = t->re_off_time;
|
|
t->cs_pulse_width = 0;
|
|
|
|
dev_dbg(hwa742.fbdev->dev, "[reg]cson %d csoff %d reon %d reoff %d\n",
|
|
t->cs_on_time, t->cs_off_time, t->re_on_time, t->re_off_time);
|
|
dev_dbg(hwa742.fbdev->dev, "[reg]weon %d weoff %d recyc %d wecyc %d\n",
|
|
t->we_on_time, t->we_off_time, t->re_cycle_time,
|
|
t->we_cycle_time);
|
|
dev_dbg(hwa742.fbdev->dev, "[reg]rdaccess %d cspulse %d\n",
|
|
t->access_time, t->cs_pulse_width);
|
|
|
|
return hwa742.extif->convert_timings(t);
|
|
}
|
|
|
|
static int calc_lut_timing(unsigned long sysclk, int div)
|
|
{
|
|
struct extif_timings *t;
|
|
unsigned long systim;
|
|
|
|
/* CSOnTime 0, WEOnTime 2 ns, REOnTime 2 ns,
|
|
* AccessTime 2 ns + 4 * SYSCLK + 26 (lut),
|
|
* WEOffTime = WEOnTime + 1 ns,
|
|
* REOffTime = REOnTime + 4*SYSCLK + 26 ns (lut),
|
|
* CSOffTime = REOffTime + 1 ns
|
|
* ReadCycle = 2ns + 4*SYSCLK + 26 ns (lut),
|
|
* WriteCycle = 2*SYSCLK + 2 ns,
|
|
* CSPulseWidth = 10 ns
|
|
*/
|
|
systim = 1000000000 / (sysclk / 1000);
|
|
dev_dbg(hwa742.fbdev->dev, "HWA742 systim %lu ps extif_clk_period %u ps"
|
|
"extif_clk_div %d\n", systim, hwa742.extif_clk_period, div);
|
|
|
|
t = &hwa742.lut_timings;
|
|
memset(t, 0, sizeof(*t));
|
|
|
|
t->clk_div = div;
|
|
|
|
t->cs_on_time = 0;
|
|
t->we_on_time = round_to_extif_ticks(t->cs_on_time + 2000, div);
|
|
t->re_on_time = round_to_extif_ticks(t->cs_on_time + 2000, div);
|
|
t->access_time = round_to_extif_ticks(t->re_on_time + 4 * systim +
|
|
26000, div);
|
|
t->we_off_time = round_to_extif_ticks(t->we_on_time + 1000, div);
|
|
t->re_off_time = round_to_extif_ticks(t->re_on_time + 4 * systim +
|
|
26000, div);
|
|
t->cs_off_time = round_to_extif_ticks(t->re_off_time + 1000, div);
|
|
t->we_cycle_time = round_to_extif_ticks(2 * systim + 2000, div);
|
|
if (t->we_cycle_time < t->we_off_time)
|
|
t->we_cycle_time = t->we_off_time;
|
|
t->re_cycle_time = round_to_extif_ticks(2000 + 4 * systim + 26000, div);
|
|
if (t->re_cycle_time < t->re_off_time)
|
|
t->re_cycle_time = t->re_off_time;
|
|
t->cs_pulse_width = 0;
|
|
|
|
dev_dbg(hwa742.fbdev->dev, "[lut]cson %d csoff %d reon %d reoff %d\n",
|
|
t->cs_on_time, t->cs_off_time, t->re_on_time, t->re_off_time);
|
|
dev_dbg(hwa742.fbdev->dev, "[lut]weon %d weoff %d recyc %d wecyc %d\n",
|
|
t->we_on_time, t->we_off_time, t->re_cycle_time,
|
|
t->we_cycle_time);
|
|
dev_dbg(hwa742.fbdev->dev, "[lut]rdaccess %d cspulse %d\n",
|
|
t->access_time, t->cs_pulse_width);
|
|
|
|
return hwa742.extif->convert_timings(t);
|
|
}
|
|
|
|
static int calc_extif_timings(unsigned long sysclk, int *extif_mem_div)
|
|
{
|
|
int max_clk_div;
|
|
int div;
|
|
|
|
hwa742.extif->get_clk_info(&hwa742.extif_clk_period, &max_clk_div);
|
|
for (div = 1; div < max_clk_div; div++) {
|
|
if (calc_reg_timing(sysclk, div) == 0)
|
|
break;
|
|
}
|
|
if (div >= max_clk_div)
|
|
goto err;
|
|
|
|
*extif_mem_div = div;
|
|
|
|
for (div = 1; div < max_clk_div; div++) {
|
|
if (calc_lut_timing(sysclk, div) == 0)
|
|
break;
|
|
}
|
|
|
|
if (div >= max_clk_div)
|
|
goto err;
|
|
|
|
return 0;
|
|
|
|
err:
|
|
dev_err(hwa742.fbdev->dev, "can't setup timings\n");
|
|
return -1;
|
|
}
|
|
|
|
static void calc_hwa742_clk_rates(unsigned long ext_clk,
|
|
unsigned long *sys_clk, unsigned long *pix_clk)
|
|
{
|
|
int pix_clk_src;
|
|
int sys_div = 0, sys_mul = 0;
|
|
int pix_div;
|
|
|
|
pix_clk_src = hwa742_read_reg(HWA742_CLK_SRC_REG);
|
|
pix_div = ((pix_clk_src >> 3) & 0x1f) + 1;
|
|
if ((pix_clk_src & (0x3 << 1)) == 0) {
|
|
/* Source is the PLL */
|
|
sys_div = (hwa742_read_reg(HWA742_PLL_DIV_REG) & 0x3f) + 1;
|
|
sys_mul = (hwa742_read_reg(HWA742_PLL_4_REG) & 0x7f) + 1;
|
|
*sys_clk = ext_clk * sys_mul / sys_div;
|
|
} else /* else source is ext clk, or oscillator */
|
|
*sys_clk = ext_clk;
|
|
|
|
*pix_clk = *sys_clk / pix_div; /* HZ */
|
|
dev_dbg(hwa742.fbdev->dev,
|
|
"ext_clk %ld pix_src %d pix_div %d sys_div %d sys_mul %d\n",
|
|
ext_clk, pix_clk_src & (0x3 << 1), pix_div, sys_div, sys_mul);
|
|
dev_dbg(hwa742.fbdev->dev, "sys_clk %ld pix_clk %ld\n",
|
|
*sys_clk, *pix_clk);
|
|
}
|
|
|
|
|
|
static int setup_tearsync(unsigned long pix_clk, int extif_div)
|
|
{
|
|
int hdisp, vdisp;
|
|
int hndp, vndp;
|
|
int hsw, vsw;
|
|
int hs, vs;
|
|
int hs_pol_inv, vs_pol_inv;
|
|
int use_hsvs, use_ndp;
|
|
u8 b;
|
|
|
|
hsw = hwa742_read_reg(HWA742_HS_W_REG);
|
|
vsw = hwa742_read_reg(HWA742_VS_W_REG);
|
|
hs_pol_inv = !(hsw & 0x80);
|
|
vs_pol_inv = !(vsw & 0x80);
|
|
hsw = hsw & 0x7f;
|
|
vsw = vsw & 0x3f;
|
|
|
|
hdisp = (hwa742_read_reg(HWA742_H_DISP_REG) & 0x7f) * 8;
|
|
vdisp = hwa742_read_reg(HWA742_V_DISP_1_REG) +
|
|
((hwa742_read_reg(HWA742_V_DISP_2_REG) & 0x3) << 8);
|
|
|
|
hndp = hwa742_read_reg(HWA742_H_NDP_REG) & 0x7f;
|
|
vndp = hwa742_read_reg(HWA742_V_NDP_REG);
|
|
|
|
/* time to transfer one pixel (16bpp) in ps */
|
|
hwa742.pix_tx_time = hwa742.reg_timings.we_cycle_time;
|
|
if (hwa742.extif->get_max_tx_rate != NULL) {
|
|
/*
|
|
* The external interface might have a rate limitation,
|
|
* if so, we have to maximize our transfer rate.
|
|
*/
|
|
unsigned long min_tx_time;
|
|
unsigned long max_tx_rate = hwa742.extif->get_max_tx_rate();
|
|
|
|
dev_dbg(hwa742.fbdev->dev, "max_tx_rate %ld HZ\n",
|
|
max_tx_rate);
|
|
min_tx_time = 1000000000 / (max_tx_rate / 1000); /* ps */
|
|
if (hwa742.pix_tx_time < min_tx_time)
|
|
hwa742.pix_tx_time = min_tx_time;
|
|
}
|
|
|
|
/* time to update one line in ps */
|
|
hwa742.line_upd_time = (hdisp + hndp) * 1000000 / (pix_clk / 1000);
|
|
hwa742.line_upd_time *= 1000;
|
|
if (hdisp * hwa742.pix_tx_time > hwa742.line_upd_time)
|
|
/*
|
|
* transfer speed too low, we might have to use both
|
|
* HS and VS
|
|
*/
|
|
use_hsvs = 1;
|
|
else
|
|
/* decent transfer speed, we'll always use only VS */
|
|
use_hsvs = 0;
|
|
|
|
if (use_hsvs && (hs_pol_inv || vs_pol_inv)) {
|
|
/*
|
|
* HS or'ed with VS doesn't work, use the active high
|
|
* TE signal based on HNDP / VNDP
|
|
*/
|
|
use_ndp = 1;
|
|
hs_pol_inv = 0;
|
|
vs_pol_inv = 0;
|
|
hs = hndp;
|
|
vs = vndp;
|
|
} else {
|
|
/*
|
|
* Use HS or'ed with VS as a TE signal if both are needed
|
|
* or VNDP if only vsync is needed.
|
|
*/
|
|
use_ndp = 0;
|
|
hs = hsw;
|
|
vs = vsw;
|
|
if (!use_hsvs) {
|
|
hs_pol_inv = 0;
|
|
vs_pol_inv = 0;
|
|
}
|
|
}
|
|
|
|
hs = hs * 1000000 / (pix_clk / 1000); /* ps */
|
|
hs *= 1000;
|
|
|
|
vs = vs * (hdisp + hndp) * 1000000 / (pix_clk / 1000); /* ps */
|
|
vs *= 1000;
|
|
|
|
if (vs <= hs)
|
|
return -EDOM;
|
|
/* set VS to 120% of HS to minimize VS detection time */
|
|
vs = hs * 12 / 10;
|
|
/* minimize HS too */
|
|
hs = 10000;
|
|
|
|
b = hwa742_read_reg(HWA742_NDP_CTRL);
|
|
b &= ~0x3;
|
|
b |= use_hsvs ? 1 : 0;
|
|
b |= (use_ndp && use_hsvs) ? 0 : 2;
|
|
hwa742_write_reg(HWA742_NDP_CTRL, b);
|
|
|
|
hwa742.vsync_only = !use_hsvs;
|
|
|
|
dev_dbg(hwa742.fbdev->dev,
|
|
"pix_clk %ld HZ pix_tx_time %ld ps line_upd_time %ld ps\n",
|
|
pix_clk, hwa742.pix_tx_time, hwa742.line_upd_time);
|
|
dev_dbg(hwa742.fbdev->dev,
|
|
"hs %d ps vs %d ps mode %d vsync_only %d\n",
|
|
hs, vs, (b & 0x3), !use_hsvs);
|
|
|
|
return hwa742.extif->setup_tearsync(1, hs, vs,
|
|
hs_pol_inv, vs_pol_inv, extif_div);
|
|
}
|
|
|
|
static void hwa742_get_caps(int plane, struct omapfb_caps *caps)
|
|
{
|
|
hwa742.int_ctrl->get_caps(plane, caps);
|
|
caps->ctrl |= OMAPFB_CAPS_MANUAL_UPDATE |
|
|
OMAPFB_CAPS_WINDOW_PIXEL_DOUBLE;
|
|
if (hwa742.te_connected)
|
|
caps->ctrl |= OMAPFB_CAPS_TEARSYNC;
|
|
caps->wnd_color |= (1 << OMAPFB_COLOR_RGB565) |
|
|
(1 << OMAPFB_COLOR_YUV420);
|
|
}
|
|
|
|
static void hwa742_suspend(void)
|
|
{
|
|
hwa742.update_mode_before_suspend = hwa742.update_mode;
|
|
hwa742_set_update_mode(OMAPFB_UPDATE_DISABLED);
|
|
/* Enable sleep mode */
|
|
hwa742_write_reg(HWA742_POWER_SAVE, 1 << 1);
|
|
clk_disable(hwa742.sys_ck);
|
|
}
|
|
|
|
static void hwa742_resume(void)
|
|
{
|
|
clk_enable(hwa742.sys_ck);
|
|
|
|
/* Disable sleep mode */
|
|
hwa742_write_reg(HWA742_POWER_SAVE, 0);
|
|
while (1) {
|
|
/* Loop until PLL output is stabilized */
|
|
if (hwa742_read_reg(HWA742_PLL_DIV_REG) & (1 << 7))
|
|
break;
|
|
set_current_state(TASK_UNINTERRUPTIBLE);
|
|
schedule_timeout(msecs_to_jiffies(5));
|
|
}
|
|
hwa742_set_update_mode(hwa742.update_mode_before_suspend);
|
|
}
|
|
|
|
static int hwa742_init(struct omapfb_device *fbdev, int ext_mode,
|
|
struct omapfb_mem_desc *req_vram)
|
|
{
|
|
int r = 0, i;
|
|
u8 rev, conf;
|
|
unsigned long ext_clk;
|
|
unsigned long sys_clk, pix_clk;
|
|
int extif_mem_div;
|
|
struct omapfb_platform_data *omapfb_conf;
|
|
|
|
BUG_ON(!fbdev->ext_if || !fbdev->int_ctrl);
|
|
|
|
hwa742.fbdev = fbdev;
|
|
hwa742.extif = fbdev->ext_if;
|
|
hwa742.int_ctrl = fbdev->int_ctrl;
|
|
|
|
omapfb_conf = dev_get_platdata(fbdev->dev);
|
|
|
|
hwa742.sys_ck = clk_get(NULL, "hwa_sys_ck");
|
|
|
|
spin_lock_init(&hwa742.req_lock);
|
|
|
|
if ((r = hwa742.int_ctrl->init(fbdev, 1, req_vram)) < 0)
|
|
goto err1;
|
|
|
|
if ((r = hwa742.extif->init(fbdev)) < 0)
|
|
goto err2;
|
|
|
|
ext_clk = clk_get_rate(hwa742.sys_ck);
|
|
if ((r = calc_extif_timings(ext_clk, &extif_mem_div)) < 0)
|
|
goto err3;
|
|
hwa742.extif->set_timings(&hwa742.reg_timings);
|
|
clk_enable(hwa742.sys_ck);
|
|
|
|
calc_hwa742_clk_rates(ext_clk, &sys_clk, &pix_clk);
|
|
if ((r = calc_extif_timings(sys_clk, &extif_mem_div)) < 0)
|
|
goto err4;
|
|
hwa742.extif->set_timings(&hwa742.reg_timings);
|
|
|
|
rev = hwa742_read_reg(HWA742_REV_CODE_REG);
|
|
if ((rev & 0xfc) != 0x80) {
|
|
dev_err(fbdev->dev, "HWA742: invalid revision %02x\n", rev);
|
|
r = -ENODEV;
|
|
goto err4;
|
|
}
|
|
|
|
|
|
if (!(hwa742_read_reg(HWA742_PLL_DIV_REG) & 0x80)) {
|
|
dev_err(fbdev->dev,
|
|
"HWA742: controller not initialized by the bootloader\n");
|
|
r = -ENODEV;
|
|
goto err4;
|
|
}
|
|
|
|
if ((r = setup_tearsync(pix_clk, extif_mem_div)) < 0) {
|
|
dev_err(hwa742.fbdev->dev,
|
|
"HWA742: can't setup tearing synchronization\n");
|
|
goto err4;
|
|
}
|
|
hwa742.te_connected = 1;
|
|
|
|
hwa742.max_transmit_size = hwa742.extif->max_transmit_size;
|
|
|
|
hwa742.update_mode = OMAPFB_UPDATE_DISABLED;
|
|
|
|
hwa742.auto_update_window.x = 0;
|
|
hwa742.auto_update_window.y = 0;
|
|
hwa742.auto_update_window.width = fbdev->panel->x_res;
|
|
hwa742.auto_update_window.height = fbdev->panel->y_res;
|
|
hwa742.auto_update_window.format = 0;
|
|
|
|
timer_setup(&hwa742.auto_update_timer, hwa742_update_window_auto, 0);
|
|
|
|
hwa742.prev_color_mode = -1;
|
|
hwa742.prev_flags = 0;
|
|
|
|
hwa742.fbdev = fbdev;
|
|
|
|
INIT_LIST_HEAD(&hwa742.free_req_list);
|
|
INIT_LIST_HEAD(&hwa742.pending_req_list);
|
|
for (i = 0; i < ARRAY_SIZE(hwa742.req_pool); i++)
|
|
list_add(&hwa742.req_pool[i].entry, &hwa742.free_req_list);
|
|
BUG_ON(i <= IRQ_REQ_POOL_SIZE);
|
|
sema_init(&hwa742.req_sema, i - IRQ_REQ_POOL_SIZE);
|
|
|
|
conf = hwa742_read_reg(HWA742_CONFIG_REG);
|
|
dev_info(fbdev->dev, ": Epson HWA742 LCD controller rev %d "
|
|
"initialized (CNF pins %x)\n", rev & 0x03, conf & 0x07);
|
|
|
|
return 0;
|
|
err4:
|
|
clk_disable(hwa742.sys_ck);
|
|
err3:
|
|
hwa742.extif->cleanup();
|
|
err2:
|
|
hwa742.int_ctrl->cleanup();
|
|
err1:
|
|
return r;
|
|
}
|
|
|
|
static void hwa742_cleanup(void)
|
|
{
|
|
hwa742_set_update_mode(OMAPFB_UPDATE_DISABLED);
|
|
hwa742.extif->cleanup();
|
|
hwa742.int_ctrl->cleanup();
|
|
clk_disable(hwa742.sys_ck);
|
|
}
|
|
|
|
struct lcd_ctrl hwa742_ctrl = {
|
|
.name = "hwa742",
|
|
.init = hwa742_init,
|
|
.cleanup = hwa742_cleanup,
|
|
.bind_client = hwa742_bind_client,
|
|
.get_caps = hwa742_get_caps,
|
|
.set_update_mode = hwa742_set_update_mode,
|
|
.get_update_mode = hwa742_get_update_mode,
|
|
.setup_plane = hwa742_setup_plane,
|
|
.enable_plane = hwa742_enable_plane,
|
|
.update_window = hwa742_update_window_async,
|
|
.sync = hwa742_sync,
|
|
.suspend = hwa742_suspend,
|
|
.resume = hwa742_resume,
|
|
};
|
|
|