135 lines
3.3 KiB
C
135 lines
3.3 KiB
C
// SPDX-License-Identifier: GPL-2.0-only
|
|
/*
|
|
* Copyright (C) ST-Ericsson SA 2010
|
|
*
|
|
* Author: Arun R Murthy <arun.murthy@stericsson.com>
|
|
*/
|
|
#include <linux/err.h>
|
|
#include <linux/platform_device.h>
|
|
#include <linux/slab.h>
|
|
#include <linux/pwm.h>
|
|
#include <linux/mfd/abx500.h>
|
|
#include <linux/mfd/abx500/ab8500.h>
|
|
#include <linux/module.h>
|
|
|
|
/*
|
|
* PWM Out generators
|
|
* Bank: 0x10
|
|
*/
|
|
#define AB8500_PWM_OUT_CTRL1_REG 0x60
|
|
#define AB8500_PWM_OUT_CTRL2_REG 0x61
|
|
#define AB8500_PWM_OUT_CTRL7_REG 0x66
|
|
|
|
struct ab8500_pwm_chip {
|
|
struct pwm_chip chip;
|
|
unsigned int hwid;
|
|
};
|
|
|
|
static struct ab8500_pwm_chip *ab8500_pwm_from_chip(struct pwm_chip *chip)
|
|
{
|
|
return container_of(chip, struct ab8500_pwm_chip, chip);
|
|
}
|
|
|
|
static int ab8500_pwm_apply(struct pwm_chip *chip, struct pwm_device *pwm,
|
|
const struct pwm_state *state)
|
|
{
|
|
int ret;
|
|
u8 reg;
|
|
unsigned int higher_val, lower_val;
|
|
struct ab8500_pwm_chip *ab8500 = ab8500_pwm_from_chip(chip);
|
|
|
|
if (state->polarity != PWM_POLARITY_NORMAL)
|
|
return -EINVAL;
|
|
|
|
if (!state->enabled) {
|
|
ret = abx500_mask_and_set_register_interruptible(chip->dev,
|
|
AB8500_MISC, AB8500_PWM_OUT_CTRL7_REG,
|
|
1 << ab8500->hwid, 0);
|
|
|
|
if (ret < 0)
|
|
dev_err(chip->dev, "%s: Failed to disable PWM, Error %d\n",
|
|
pwm->label, ret);
|
|
return ret;
|
|
}
|
|
|
|
/*
|
|
* get the first 8 bits that are be written to
|
|
* AB8500_PWM_OUT_CTRL1_REG[0:7]
|
|
*/
|
|
lower_val = state->duty_cycle & 0x00FF;
|
|
/*
|
|
* get bits [9:10] that are to be written to
|
|
* AB8500_PWM_OUT_CTRL2_REG[0:1]
|
|
*/
|
|
higher_val = ((state->duty_cycle & 0x0300) >> 8);
|
|
|
|
reg = AB8500_PWM_OUT_CTRL1_REG + (ab8500->hwid * 2);
|
|
|
|
ret = abx500_set_register_interruptible(chip->dev, AB8500_MISC,
|
|
reg, (u8)lower_val);
|
|
if (ret < 0)
|
|
return ret;
|
|
|
|
ret = abx500_set_register_interruptible(chip->dev, AB8500_MISC,
|
|
(reg + 1), (u8)higher_val);
|
|
if (ret < 0)
|
|
return ret;
|
|
|
|
ret = abx500_mask_and_set_register_interruptible(chip->dev,
|
|
AB8500_MISC, AB8500_PWM_OUT_CTRL7_REG,
|
|
1 << ab8500->hwid, 1 << ab8500->hwid);
|
|
if (ret < 0)
|
|
dev_err(chip->dev, "%s: Failed to enable PWM, Error %d\n",
|
|
pwm->label, ret);
|
|
|
|
return ret;
|
|
}
|
|
|
|
static const struct pwm_ops ab8500_pwm_ops = {
|
|
.apply = ab8500_pwm_apply,
|
|
.owner = THIS_MODULE,
|
|
};
|
|
|
|
static int ab8500_pwm_probe(struct platform_device *pdev)
|
|
{
|
|
struct ab8500_pwm_chip *ab8500;
|
|
int err;
|
|
|
|
if (pdev->id < 1 || pdev->id > 31)
|
|
return dev_err_probe(&pdev->dev, EINVAL, "Invalid device id %d\n", pdev->id);
|
|
|
|
/*
|
|
* Nothing to be done in probe, this is required to get the
|
|
* device which is required for ab8500 read and write
|
|
*/
|
|
ab8500 = devm_kzalloc(&pdev->dev, sizeof(*ab8500), GFP_KERNEL);
|
|
if (ab8500 == NULL)
|
|
return -ENOMEM;
|
|
|
|
ab8500->chip.dev = &pdev->dev;
|
|
ab8500->chip.ops = &ab8500_pwm_ops;
|
|
ab8500->chip.npwm = 1;
|
|
ab8500->hwid = pdev->id - 1;
|
|
|
|
err = devm_pwmchip_add(&pdev->dev, &ab8500->chip);
|
|
if (err < 0)
|
|
return dev_err_probe(&pdev->dev, err, "Failed to add pwm chip\n");
|
|
|
|
dev_dbg(&pdev->dev, "pwm probe successful\n");
|
|
|
|
return 0;
|
|
}
|
|
|
|
static struct platform_driver ab8500_pwm_driver = {
|
|
.driver = {
|
|
.name = "ab8500-pwm",
|
|
},
|
|
.probe = ab8500_pwm_probe,
|
|
};
|
|
module_platform_driver(ab8500_pwm_driver);
|
|
|
|
MODULE_AUTHOR("Arun MURTHY <arun.murthy@stericsson.com>");
|
|
MODULE_DESCRIPTION("AB8500 Pulse Width Modulation Driver");
|
|
MODULE_ALIAS("platform:ab8500-pwm");
|
|
MODULE_LICENSE("GPL v2");
|